Technische Dokumentation
Technical Documentation
XOMOX
XACT Vane Type Actuators
XOMOX International GmbH & Co. OHG Doc. Nr.: tdb_xact_gb
Von-Behring-Straße 15
D-88131 Lindau / Deutschland Januar 2008
XACT Pneumatic actuators are ideal for all rotation stem valves
Compact design
Only one moving part
No air leakage
Light weight
External corrosion resistant coating
Long cycle life
Maximum cycling speed
Maximum torque output also at low working pressure
Air connection on both sides possible
XOMOX International GmbH & Co. OHG Tel.: ++49(0)8382/702-0 Dok. Nr.: tdb_xact_gb Page 2 of 5
Von-Behring-Straße 15 Fax: ++49(0)8382/702-144 Approved:H. Welker
D-88131 Lindau / Deutschland www.cranechempharma.com Responsible: H.Egler Januar 2008
Design Features & Benefits
XACT pneumatic actuators are ideal for all rotation stem valves with 0-90°rotation.
The simple proven construction offers direct rotary output eliminating the need to convert from linear to rotary
motion.
The seals between housing and vane are accomplished by a special one-piece o-ring. Precised machining and
special internal surface treatment guarantee tight sealing, long life and minimal maintenance.
Simple mounting of limit switches, manual override, positioners etc. on actuator top.
Scope of Supply
Design Versions
Series XACT for Torques up to 2000 nm
TYPE MX 3000 for Torques from 1500 up to 3300 nm
Materials
Body Aluminium-Tioxal-coated
Paddle Aluminium
Seal Buna-N, Viton-O
Operating Pressure: Max. 8 bar
Temperature Range:
Buna-N Ring: 290 K to 380 K (-17 °C to +107 °C or 0 F to +225 F)
Viton-O-Ring 233 K to 453 K (-40 °C to +180 °C or –40 F to + 356 F)
Cycling rate:
Up to 8 cycles per minute.
Cycling Time:
1 to 7 sec
Working Media:
Air hydraulic oil or other (non-corrosive) media.
Available Actuator devices and accessories
Air Connection on both sides possible
Options
Solenoid valves, Limit switches, Safe systems
Special Versions (Examples):
Stainless steel shaft
Extended screws
Specially greased
PTFE inner coating
External coating acc. to customer requirements
Cryogenic application (- 40°C)
High temperature application (300°F)
and more options
XOMOX International GmbH & Co. OHG Tel.: ++49(0)8382/702-0 Dok. Nr.: tdb_xact_gb Page 3 of 5
Von-Behring-Straße 15 Fax: ++49(0)8382/702-144 Approved:H. Welker
D-88131 Lindau / Deutschland www.cranechempharma.com Responsible: H.Egler Januar 2008
Materials of Construction
Item Qty. Description Material
1 1 Housing top l Die-cast aluminium
2 1 Bushing Bronze
3 1 Paddle l Die-cast aluminium
3a 1 Safety Bearing Nylon
4 1 Shaft Steel
5* 2 Shaft o-ring Buna-N
6* 1 Paddle seal Buna-N
7 1 Housing bottom Die-cast aluminium
8 2 Alignment dowel Steel cadium plated
9 15 Nut Stell cadium plated
10 15 Housing screw Steel cadium plated
11 2 Stroke adjustment screw 1.4541 (stainless steel)
12 2 Gasket Rubber/Steel
13 2 Disc Steel cadium plated
14 2 Lock nut Steel cadium plated
*Recommended spare parts
Torques
3500
3000
2500
MX 3000
Md (Nm)
2000
XACT 7125
1500
XACT 7075
1000 XACT 7045
XACT 7020
500
0
0 1 2 3 4 5 6 7 8 9 10
Operating Pressure (bar)
XOMOX International GmbH & Co. OHG Tel.: ++49(0)8382/702-0 Dok. Nr.: tdb_xact_gb Page 4 of 5
Von-Behring-Straße 15 Fax: ++49(0)8382/702-144 Approved:H. Welker
D-88131 Lindau / Deutschland www.cranechempharma.com Responsible: H.Egler Januar 2008
Technical Data / XACT Series
MX 3000
7020 7045 7075 7125 MX 3000
A 174.5 188.5 236 276.4 346
B 163.5 266.5 266.5 254 422
C 19 28.7 28.7 28.7 38.1
D 28.8 36.6 36.6 36.6 63.4
E 58
F 112.7 189 189 177.8 33
G 19 28.7 28.7 28.7 39
H 52.5 66.5 66.5 - 88
J 122 169.5 169.5 - 140
L ¼ NPT ¼ NPT ¼ NPT 3/8 – 18 NPT 38
M M10 M14 M14 M14 M 18
P 76 89 89 - 117
7020 7045 7075 7125 MX 3000
Air 670 1803 1950 3800
Consumption in
m³ for 90°
Stroke 74°-110° 80°-110° 74°-110° 80°-102° 70°-110°
Adjustement
Weight (kg) 3.2 6.4 8.2 10.0 29.6
XOMOX will fit any other rotary actuators (pneumatic, hydraulic, electric) per customer requirements.
This also applies to all suitable solenoid and pilot valves, limit switches, positioners and other accessories.
Crane Co., and its subsidiaries cannot accept responsibility for possible errors in catalogues, brochures, other printed materials, and website
information. Crane Co. reserves the right to alter its products without notice, including products already on order provided that such alteration can
be made without changes being necessary in specifications already agreed. All their trademarks in this material are property of the Crane Co. or
its subsidiaries. The Crane and Crane brands logotype are registered trademarks of Crane Co. All rights reserved.
XOMOX International GmbH & Co. OHG Tel.: ++49(0)8382/702-0 Dok. Nr.: tdb_xact_gb Page 5 of 5
Von-Behring-Straße 15 Fax: ++49(0)8382/702-144 Approved:H. Welker
D-88131 Lindau / Deutschland www.cranechempharma.com Responsible: H.Egler Januar 2008