4/26/22, 11:04 AM SIS 2.

2020/12/03 E239/E240 Rear Parking Brake Dragging (M0122672-00)

SMCS - 4267 i08289188

Possible Non-

PSP
Component Component
How to Diagnose  Corrective Action 
Root Root
Causes  Causes 
Relay Valve
for the
202 0006- Service with new relay valve
for the parking and

2
Parking and Contamination  secondary brake. Make sure
Secondary
Brake 
/ F 1
Release parking brake and measure pressure park brake

09: 0 F
that oil is ISO 18/15 or
better. 

4
retract pressure. If the pressure is out of spec (

/ B
4600 ± 800 kPa (667 ± 116 psi)), follow corrective actions. 

2
Solenoid Service with new parking
Valve for the
Parking
Brake 
Contamination 
0
M0 :02+ 4 6
brake solenoid valve. Make
sure that oil is ISO 18/15 or
better.

1
Check to see if the "AETA" self-test is working properly.

2 0
Service with new "AETA"

© 2 267 2:00
"AETA/TCS" Ensure that the left and right rear parking brake pressure
Contamination  valve. Make sure that oil is
Valve  increases and decreases smoothly. If one side does not cycle
ISO 18/15 or better. 
completely, then inspect and repair the "AETA" valve. 
Relief valve
Stuck open 
02 2
Contamination  Brake Pump stalled at accumulator pressure. 

Cat 2 C
Replace or reset Relief
Valve. 
Replace if one or more

e a
Over Apply parking brake and measure the pressure at the brake brake packs are lower than

r
Con pilla terpi
Brake Pack 
pressurization  packs. All four pressures should be within tolerance.  the others. Inspect for seal
damage. 

fide r: llar
Table 1

ntia Inc
KYD1-UP, KZD1-UP

PSP-0006F1FB

lG .
ree
2022/04/26
09:03:35+02:00
i08289188
© 2022 Caterpillar Inc.
Caterpillar:
n
Confidential Green

https://sis2.cat.com/#/print-preview/service/%257B%2522title%2522%253A%2522E239%252FE240%2520Rear%2520Parking%2520Brake%2520Dragging%2520(M0122672-00)%2522%252C%2522formattedPubli… 1/1