Scribd
Upload
48 views2 pages

Lab 2 Microdigitaledcom

The document discusses a lab activity on using an 8051 assembler and simulator. It provides objectives and materials needed for the lab. It describes two activities - writing a program to move a value between registers and writing a program to add digits of a ID number and save the result.

Uploaded by

test dummy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
48 views2 pages

Lab 2 Microdigitaledcom

The document discusses a lab activity on using an 8051 assembler and simulator. It provides objectives and materials needed for the lab. It describes two activities - writing a program to move a value between registers and writing a program to add digits of a ID number and save the result.

Uploaded by

test dummy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

LAB 2

8051 ASSEMBLER & SIMULATOR

OBJECTIVES:
 To examine and use an 8051 assembler.
 To examine and use an 8051 simulator.

REFERENCE:
 Mazidi and McKinlay, “The 8051 Microcontroller and Embedded Systems,” Chapter 2,
Appendix G.

MATERIALS:
 8051 assembler and simulator from Franklin Software Inc., Keil Corporation, or the
assembler of your choice.

WEB SITES:
www.fsinc.com for Franklin Software
www.keil.com for Keil Corporation

ACTIVITY 1
Write and assemble a program to move value 99H to register A. Then from register A
move it to all registers R0 - R7. Use the simulator to single-step the program and examine the
registers.

ACTIVITY 2
Write and assemble a program to add all the single digits of your ID number and save the
result in R2. Pick 7 random numbers (all single digit) if you do not want to use your ID number.
Then use the simulator to single-step the program and examine the registers.

Lab Manual for “The 8051 Microcontroller and Embedded Systems” LAB 2
LAB 2
WORKSHEET

Name: Date: Class:

1. Indicate the size (8- or 16-bit) of each of the following registers.

PC = A= B=

R0= R1= R2= R7=

2. For Question 1, indicate the largest value (in decimal) that each register can contain.

PC = A= B=

R0= R1= R2= R7=

3. For Question 1, indicate the largest value (in hex) that each register can contain.

PC = A= B=

R0= R1= R2= R7=

4. Who generates each of the following files and what is the use of each.

.asm

.lst

.obj

.abs

.hex

LAB 2 Lab Manual for “The 8051 Microcontroller and Embedded Systems”

You might also like