4.1.2 Clamping heads. Clamping heads SPANNTOP Clamping heads. Clamping heads SPANNTOP 4.1.2.

Technology proven in practice

HAINBUCH
clamping heads

Modular system
This development represents more than 20 years of SPANNTOP Key advantages
experience and it exploits all the advantages of the latest machine Concentric precision < 0.01 mm possible
tools. The clamping head is not only extremely powerful, it is also Typical HAINBUCH features, such as user friendly set-up,
convincing through simple handling. Set-up in no time at all with full passage, parallel clamping, optimal power conversion,

Clamping device
the changing fixture. The combination of steel and rubber, com- extreme rigidity and superior holding power, as well as
bined through a high-quality vulcanization process, is designed minimal wear and tear
for maximum RPM and holding power – with optimum concen-
tricity, extreme rigidity and long life. Naturally there have been
a number of improvements over the years to ensure reliability on

Clamping element
this mature technology.

XYZ Machine Tools only sell items highlighted in yellow.

Accessories
Conditions
Contact
Order
292 Order-Hotline +49 [0]7144. 907-333 Order-Hotline +49 [0]7144. 907-333 293
 The clamping head

For every application the right solution

clamping head
The solid clamping head is precision

ground in one set-up. It is then separ-

Available options:
ated into segments and re-joined to its
■ No axial grooves
intended diameter through the vulcani- ■ Reduced face slot width

zation process. We have perfected

For raw material: For precision machining:
this technology – you will notice the Standard design G design
■ Serrated ■ Smooth clamping bore
dif-ference. It takes lots of expertise ■ Z or F serration for heavy-duty
and meticulous work to join these stiff, cutting

hardened chrome-nickel segments

Machining of HSW clamping heads
with the especially for this purpose

developed rubber from HAINBUCH.

That rubber is resistant to all standard

coolants and it prevents chips from

entering the chuck.

Loading ring for in-house machining Plug for in-house machining

For ultra precise machining: Vulcanized clamping heads of

Soft jaw HSW design various standard sizes in round,
■ Only the taper and coupling areas serrated and smooth versions are
are hardened while the ID and face usually available from stock – as
Discover the possibilities: of the clamping head are soft. are most of the standard size
profile options. By clamping a loading ring or plug, hexagon and square profiles.
the HSW head can be machined to
the required size.

16 Outside clamping . SPANNTOP clamping head Outside clamping . SPANNTOP clamping head 17
4.1.2.1 Clamping heads. Clamping heads SPANNTOP Clamping heads. Clamping heads SPANNTOP 4.1.2.1

Clamping head change-over [approx. 30 sec.] Clamping head SPANNTOP for raw material clamping
Size Total lengt h Descript ion Profile Increments Type of Clamping In stock Order no.
[mm] [mm] serrat ion range [mm]
32 Smoot h 32 4,0 - 7,5 32
✔ SK32BZIR4,0-7,5
Radial grooves 32 8,0 - 10,5 32
✔ SK32BZIR8,0-10,5
Radial and
32

HAINBUCH
10,0 - 32,0 SK32BZIR10,0-32,0
axial grooves
32

32

Front nose Smoot h 32 7 32

✔ SK32BZIV7,0
47 1
Clamping device with Remove clamping head Clamping device without Insert clamping head Clamping device set-up
32

extension
32

8-9 ✔ SK32BZIV8,0-9,0
Radial grooves
32

32

32

clamping head clamping head 10 - 22 ✔ SK32BZIV10,0-22,0

32

32

Smoot h 32 7 32
✔ SK32BZIS7,0

Modular system
8-9 ✔ SK32BZIS8,0-9,0
Three models Radial grooves
32

32

10 - 27 ✔ SK32BZIS10,0-27,0
32

32

42 Smoot h 42 4,0 - 7,5 42

✔ SK42BZIR4,0-7,5

0,5
Radial grooves 42 8,0 - 10,5 42
✔ SK42BZIR8,0-10,5
Clamping Clamping Machinable 42
42

Radial and
of raw material of finished material to size 11 - 42 ✔ SK42BZIR11,0-42,0
axial grooves
42

Clamping device
42

✔
Label294

Front nose Smoot h 42 7 42 SK42BZIV7,0

47 42

extension 8-9 ✔ SK42BZIV8,0-9,0

Radial grooves
42

42

42

10 - 30 ✔ SK42BZIV10,0-30,0
42

1
42

Smoot h 7 ✔ SK42BZIS7,0
42

42 42

8-9 ✔ SK42BZIS8,0-9,0
Radial grooves

Clamping element
42

42

10 - 38 ✔ SK42BZIS10,0-38,0
42

42

52 Smoot h 5,0 – 7,5 ✔ SK52BZIR5,0-7,5

Available sizes 32, 42, 52, 65, 80, 100 32, 42, 52, 65, 80, 100 32, 42, 52, 65, 80, 100
52 52

Radial grooves 52 8,0 – 10,5 52

✔ SK52BZIR8,0-10,5
Clamping range of all sizes [mm] 4 – 100 4 – 100 5 – 100 0,5 52

Radial and
52

Variants RD [round] RD [round] RD [round] 11 - 52 ✔ SK52BZIR11,0-52,0

axial grooves
52

42

Designation BZI BZIG BZI HSW

8-9 ✔ SK52BZIV8,0-9,0
Reduced front
52

Material condition Hard Hard Soft 46

52

Radial grooves

Accessories
nose 10 - 36 ✔ SK52BZIV10,0-36,0
52

52

52

Bore Serrated clamping bore Smoot h clamping bore For machining to size
1 Smoot h 7 ✔ SK52BZIS7,0
Round
52 52

52

Standard profiles Square Round Round 8-9

8
✔ SK52BZIS8,0-9,0
Radial groo-
Hexagonal ✔
52

ves 10 - 42 52 SK52BZIS10,0-42,0

Serration
Coarse toot hed 43 - 45 52
✔ SK52BZIS43,0-45,0
✔

Conditions
Fine toot hed 65 Smoot h 65 4,0 - 7,5 65 SK65BZIR4,0-7,5
✔
372

Radial grooves 8,0 - 10,5 SK65BZIR8,0-10,5

Description For clamping of raw material For clamping of finished material For machining to size 0,5
65 65

Radial and
65

65

11 - 65 ✔ SK65BZIR11,0-65,0
axial grooves
65

65

8-9 ✔ SK65BZIV8,0-9,0
Radial groo-
Machining to size of HSW clamping heads Front nose ves
10 - 42 ✔ SK65BZIV10,0-42,0

Contact
65

65

53
extension 43 - 46 - SK65BZIV43,0-46,0
658

65

65

Designation Smoot h 7 ✔ SK65BZIS7,0

1 65
65 65

1 Chuck 8-9 65
✔ SK65BZIS8,0-9,0
2 HSW clamping head 1 1 Radial grooves ✔
65

2 10 - 42 SK65BZIS10,0-42,0
2
65

65

3 Loading ring

Order
4 Bolts
43 - 56 65
✔ SK65BZIS43,0-56,0
80 Smoot h 80 5-7 80
✔ SK80BZIR5,0-7,0
Radial grooves 80 8 - 10 80
✔ SK80BZIR8,0-10,0
Radial and
80

11 - 80 ✔ SK80BZIR11,0-80,0
axial grooves
80

80

8-9 80
✔ SK80BZIV8,0-9,0
Reduced front Radial grooves 80 10 - 42 80
✔ SK80BZIV10,0-42,0
58 1
80

80

nose 80
80

43 - 56 80
- SK80BZIV43,0-56,0
Smoot h 80 7 80
✔ SK80BZIS7,0
3 4 8-9 80
✔ SK80BZIS8,0-9,0
10 - 42 ✔ SK80BZIS10,0-42,0
Radial grooves
80

80

43 - 56 ✔ SK80BZIS43,0-56,0
80

80

57 - 68 80
- SK80BZIS57,0-68,0

294 Order-Hotline +49 [0]7144. 907-333 Order-Hotline +49 [0]7144. 907-333 295
4.1.2.1 Clamping heads. Clamping heads SPANNTOP Clamping heads. Clamping heads SPANNTOP 4.1.2.1

Size Total lengt h Descript ion Profile Increments Type of serra- Clamping In stock Order no. Loading ring
[mm] [mm] t ion range [mm]
Size In stock Order no.
100 Radial and
42 - 100 ✔ SK100BZR42,0-100,0
32 ✔ AR32
axial grooves
10

10

10

50 - 60 10
- SK100BZV50,0-60,0 42 ✔ AR42
59 No front nose
10

1 61 - 70 - SK100BZV61,0-70,0
52 ✔ AR52
10

10 10 10

HAINBUCH
Radial grooves 50 - 60 SK100BZS50,0-60,0
✔
10 10

61 - 70 10
- SK100BZS61,0-70,0 65 AR65
✔
10

71 - 86 10
- SK100BZS71,0-86,0 80 AR80
100 ✔ AR100

Modular system
Clamping head SPANNTOP for finished material clamping
Size Total lengt h Descript ion Profile Increments Type of ser- Clamping In stock Order no.
[mm] [mm] rat ion range [mm]
32 Reduced front
44 1 Smoot h 4 - 32 ✔ SK32BZIGR4,0-32,0
nose
32 32 32 32

32

32

Clamping device
42 Reduced front
42 0,5 Smoot h 4 - 42 ✔ SK42BZIGR4,0-42,0
nose
42 42 42 42

42

42

52 Reduced front
46 0,5 Smoot h 4 - 52 ✔ SK52BZIGR4,0-52,0
nose
52 52 52 52

52

52

65 Reduced front
53 0,5 Smoot h 5 - 65 ✔ SK65BZIGR5,0-65,0
nose
65 65 65 65

65

Clamping element
65

80 Reduced front
53 1 Smoot h 5 - 80 ✔ SK80BZIGR5,0-80,0
nose
80 80 80 80

80

80

100 59 10 No front nose 10 1 10 Smoot h 10 42 - 100 10

✔ SK100BZGR42,0-100,0
10

Clamping head SPANNTOP can be machined to size

Accessories
Size Total lengt h [mm] Descript ion Profile Base bore Ø [mm] In stock Order no.
32 5 ✔ SK32BZIHSWR5,0
Soft I.D. and clam-
32

44 10 ✔ SK32BZIHSWR10,0
ping head face
32 32

32

20 ✔ SK32BZIHSWR20,0
32

32

42 8 ✔ SK42BZIHSWR8,0
Soft I.D. and clam-
42

Conditions
42 15 ✔ SK42BZIHSWR15,0
ping head face
42 42

42

30 ✔ SK42BZIHSWR30,0
42

42

52 8 ✔ SK52BZIHSWR8,0
Soft I.D. and clam-
52

46 15 ✔ SK52BZIHSWR15,0
ping head face
52 52

52

30 ✔ SK52BZIHSWR30,0
52

52

65 5 65
✔ SK65BZIHSWR5,0

Contact
Soft I.D. and clam- 8 ✔ SK65BZIHSWR8,0
53
65

ping head face 20 ✔ SK65BZIHSWR20,0

65

65

65

65

40 65
✔ SK65BZIHSWR40,0
80 8 80
✔ SK80BZIHSWR8,0
Soft I.D. and clam- 20 ✔ SK80BZIHSWR20,0
53
80

ping head face 40 ✔ SK80BZIHSWR40,0

80

80

Order
80

80

60 80
✔ SK80BZIHSWR60,0
100 30 10
✔ SK100BZHSWR30,0
Soft I.D. and clam- 45 ✔ SK100BZHSWR45,0
59
10

ping head face 65 ✔ SK100BZHSWR65,0

10

10

10

10

90 10
✔ SK100BZHSWR90,0

296 Order-Hotline +49 [0]7144. 907-333 Order-Hotline +49 [0]7144. 907-333 297
 HAINBUCH
SPANNTOP chuck Detalis

SPANNTOP Combi pull-back Chuck (Rigid & most accurate, bar & chucking)

Chucks
Details

1 Pull back chuck for bar and chucking work 4

2 Easily removable endstop leaving full through bore, front stop 3

Mandrels
possible 2
3 Axially Fixed end-stop plate for clamping with pull-back effect
central thread for work piece specific end-stop included 5

4 Easily adaptable to any machine

5 Full bar passage after removal the base end-stop plate

clamping devices
6 Spindle flange to suit machine 1

Stationary
7 End-stop, easily removed with external grub screws
8 C Axis orientation of clamping head for profile work
9 Can be used on the main spindle of a twin machine if no pull
out operations or transfer work back to main spindle is needed 6
7

clamping devices
10 Takes Mandrel and Jaw adaptions 8

Adaptation
SPANNTOP Axfix deadlength Chuck (Twin spindle & specific application)

Details

Clamping heads
1 Vulcanized clamping head deadlength (ideal for short clamping) 5
4
2 Mounting threads for front end-stop
3
3 Central lubrication nipple, optimum tool life and holding power
2
due to perfect lubrication
4 Axially Fixed end-stop plate for clamping with pull-back effect 6

central thread for work piece specific end-stop included

Bushings
5 Mounting thread for drawtube connection
6 Full bar passage after removal the base end-stop plate
7 Spindle flange to suit machine 1
8 End-stop, easily removed with external grub screws
9 C Axis orientation of clamping head
10 Safe for twin spindle mounting,either spindle 7

Jaws
11 Takes Mandrel adaptions (Not jaw adaption) 8 9

SPANNTOP Modular Throughbore Chuck (Entry level bar work)

Accessories
Details

1 Vulcanized clamping head with pull-back for excellent rigid grip 3

2 Mounting threads for front end-stop (no central endstop plate)

3 Mounting thread for drawtube connection 2

4 Full chuck passage for bar work

Quick change-
over systems

5 Mounting thread for bar guide ring 4 1

6 Spindle flange to suit machine
7 C Axis orientation of clamping head
8 Can be used on the main spindle of a twin machine if no pull
out operations or transfer work back to main spindle is needed
Multi spindles

5
9 Takes mandrel adaptions ( Not jaw adaption)

6 7
Clamping
cylinders

Order-Hotline 01543 478710