Chapter 1.

IoT development history and Overview

A. Choose the correct answer, there is only one correct answer for each question:

1. Which of the following is considered the oldest known mention of IoT:

A. Bill Gates Book (the road ahead) B. ITU internet reports.

C. Trojan room coffee pot D. Hannover messe

2. In which release of the 3GPP the NB-IoT standard was frozen?

A. 13 B. 14

C. 15 D. 16

3. Which of the following chinese mobile operator(s) was(were) the first 5G

network(s) commercially used?

A. China Telecom B. China Mobile

C. China Unicom D. All of them

4. In which quarter of 2019 the 5G networks were employed in china for public
commercial use?

A. First B. Second

C. Third D. Fourth

5. Development of IoT industry is driven

by:
A. Consumers B. Policies

C. Industry D. All of them

6. One of the following is not a policy-driven application of the IoT industry:

A. Firefighting B. Smart agriculture

C. Parking D. Streetlightning

HCIA-IoT V2.5 1 CC BY 4.0

Chapter 1. IoT development history and Overview

7. One of the following is consumption-driven application of the IoT industry:

A. Smart speaker B. Public utilities

C. Security system integration D. Internet of Vehicles

8. Which of the following is industry-driven application of the IoT industry?

A. Smart agriculture B. Smart logistics

C. IoV D. All of them

9. From 1999 to 2013, the term “connected objects” was used to describe:

A. Smart wearable devices B. Smart home utilities

C. Things in the radio frequency D. Industrial devices and

domain
applications

10. How many layers are there in the IoT model?

A. 2 B. 3

C. 4 D. 5

11. Which of the following layer of the IoT model provide data presentation and
costumer interaction services?

A. Application layer B. Platform layer

C. Network layer D. Device layer

12. One of the following is not a component of the platform layer in the IoT model:

A. Cloud data center B. Operations platform

C. IoT gateways D. Security maintenance

HCIA-IoT V2.5 2 CC BY 4.0

Chapter 1. IoT development history and Overview

13. Which of the following is a network layer technology in the IoT model?

A. GPRS B. NB-IoT

C. 4G D. All of them

14. One of the following is not an example of an IoT applications:

A. Smart home B. Huawei LiteOS

C. Safe city D. IoV

15. Which of the following solutions for the IoT model architecture are
proposed by Huawei?

A. 1+2+1 B. 2+1+1

C. 2+1+2 D. 1+1+2

16. The adapted Huawei IoT architecture includes:

A. Two IoT platform, two access B. One IoT platform, two access
methods and one IoT operating
methods and one IoT operating system
system

C. One IoT platform, two access D. None of them

methods and two IoT operating
system

17. One of the following is not an example of protocols used in the NB-IoT end-to-
end solution:

A. HTTP B. MQTT

C. ICMP D. CoAP

HCIA-IoT V2.5 3 CC BY 4.0

Chapter 1. IoT development history and Overview

18. One of the following is not an example of devices used in the NB-IoT end-to-end
solution:

A. MCUs B. Modules

C. NB-IoT chipsets D. HTTP

19. Which of the following connectivity is required in a smart home using ONT technology?

A. 1 Mbit/s B. 1 Gbit/s

C. 1 Tbit/s D. None of them

20. Huawei cloud IoT platform is:

A. Open B. Pre-integrated

C. Service-oriented D. All of them

HCIA-IoT V2.5 4 CC BY 4.0

Chapter 2. IoT Industry Applications and Solutions

A. Check the correct answer, there is only one correct answer for each question:

1. One of the following is not a common problem in modern cities:

A. Visitor management B. Parking management

C. Street lamp management D. Manhole cover management

2. Smart city solution includes:

A. 2G/3G/4G and fixed access B. NB-IoT access

C. None of them D. Both of them

3. One of the following is not in the application layer for smart firefighter solution:

A. Alarm handling B. Remote muting

C. Traffic broadcast D. Device self-check

4. One of the following is not used in the smart parking solution:

A. NB-IoT modules B. Huawei IoT platform

C. IoT agent D. RRU+Antenna

5. Which of the following protocol(s) is(are) used in the network layer in the smart fire
fighting solution?

A. SNMP B. HTTP

C. CoAP D. All of them

6. Which of the following is a common problem in an traditional campus?

A. Lack of sensing B. Visitor management

C. None of them D. Both of them

HCIA-IoT V2.5 5 CC BY 4.0

Chapter 2. IoT Industry Applications and Solutions

7. In a smart campus solution, facial recognition uses one of the following:

A. Video- assisted alarm B. Intelligent pre-event warning

acknowledgment

C. System linkage handling D. Blacklist-based surveillance

8. One of the following is not used in the power consumption management in the smart
campus solution:

A. Temperature/humidity sensor B. Geo-magnetic vehicle detector

C. Intelligent switch/motion sensor D. Smart electricity/water meter

9. Electrical power supply system does not include:

A. Power generation B. Power transformation

C. Power distribution D. Power storage

10. Which of the following is(are) a character(s) of traditional grid?

A. Simultaneity B. Integration

C. Integration D. All of them

11. In the AMI solution, one of the following is not used in the field area network:

A. LTE B. Microwave

C. Zigbee D. Wireless LAN

12. In the AMI solution, NAN stands for:

A. Node Area Network B. Neighborhood Area Network

C. NB-IoT Area Network D. None of them

HCIA-IoT V2.5 6 CC BY 4.0

Chapter 2. IoT Industry Applications and Solutions

13. One of the following is not used as a device in the smart AMI solution:

A. Three-phase prepaid meter B. Wireless smoke sensor

C. Single-phase prepaid meter D. Data concentrator unit

14. Which of the following is not a connection name in IoV environment?

A. V2V B. V2N

C. V2I D. V2E

15. One of the following is not considered as a vehicle device in IoV solution:

A. T-Box B. Rearview mirror

C. Cabinet meter D. Vehicle-mounted screen

16. Which of the following is not a part of the seven-emerging technologies?

A. 4G B. 5G

C. IoT D. AI

17. “B” in 5IABCDE stands for:

A. Big data B. Block chain

C. 5G D. None of them

18. AI does not include:

A. Speech recognition B. Image recognition

C. Edge computing D. Natural language processing

19. AIoT includes:

A. Edge computing B. Image recognition

C. Block chain technologies D. Hybrid networking

HCIA-IoT V2.5 7 CC BY 4.0

Chapter 2. IoT Industry Applications and Solutions

20. Digital twin includes:

A. Physical products B. Virtual products

C. Both of them D. None of them

HCIA-IoT V2.5 8 CC BY 4.0

Chapter 3. IoT Security Technologies

A. Check the correct answer, there is only one correct answer for each question:

1. In Tesla incident, the hackers attack the:

A. Inter-vehicles connections B. In-vehicle system

C. Vehicle-gateway interconnection D. All of them

2. In the context of Mirai malware attack, “Zombies” refer to:

A. Network cameras B. Digital video recorders

C. Intelligent routers D. All of them

3. One of the following is not categorized as application threat for the LPWA security:

A. Invalid security access control B. Incorrect security configurations

C. API attacks D. Sensitive information leakage

4. Which of the following is not a security threat to the IoV system?

A. DDoS attacks/signaling storms B. API attacks

C. T-Box communication security D. Bluetooth vulnerabilities

threats

5. Trust key attacks are LPWA security threat, they fill into one of the following category:

A. Application B. Platform

C. Network (pipe) D. Device

6. Which of the following is device security threat?

A. Unencrypted transmission B. Checking of damaged devices

C. None of them D. Both of them

HCIA-IoT V2.5 9 CC BY 4.0

Chapter 3. IoT Security Technologies

7. During the last two decades, as the network attack technologies become more
sophisticated, the requirements on attackers' capabilities:

A. Raised up B. Stayed the same

C. Dropped down D. Become also sophisticated

8. Which of the following tools is(are) used to attack IoT networks?

A. APT attacks B. AI-based attacks

C. Ransomware viruses D. All of them

9. Which of the following architecture does Huawei IoT security adopt?

A. 3T+1M B. 1T+3M

C. 3T+2M D. 3T+3M

10. Which of the following is(are) included in the IoT security solution?

A. Data security B. Access security

C. Device security D. All of them

11. One of the following is not included in the Huawei IoT defense of big data security:

A. Machine learning B. Anti-DDoS

C. Threat response D. Attack detection

12. Implementation of FOTA digital signature includes using of the following algorithm(s):

A. RSA2048 B. SHA256

C. Both of them D. None of them

HCIA-IoT V2.5 10 CC BY 4.0

Chapter 3. IoT Security Technologies

13. The digital signature operation includes the use of:

A. Two public keys B. Two private keys

C. One public and one private keys D. Only a private key

14. Pipe security mechanism for IoT solution includes:

A. Anti-DDoS B. Firmware validity

C. Both of them D. None of them

15. A priority-based mechanism against anti-DDoS includes:

A. Congestion management B. Delay access mechanism

C. Both of them D. None of them

16. In the digital signature algorithm, the signature creation is done at the:

A. Core of the network B. Terminal devices

C. Gateway D. Cloud

17. One of the following is not an attack tool:

A. Password cracking B. Encryption

C. Password guessing D. Phishing

18. Which of the following is not used in the two-factor authentication?

A. Certification B. SMS

C. Digital signature D. Password

HCIA-IoT V2.5 11 CC BY 4.0

Chapter 3. IoT Security Technologies

19. In the bicycle sharing scenario, which of the following mechanism(s) is(are) used?

A. One-way authentication B. Dual authentication

C. Both of them D. None of them

20. In the context of bicycle sharing scenario, “DICE” stands for:

A. Device Identifier B. Digital Identifier Composition

Composition Engine
Engine

C. Digital Identifier Center Engine D. Digital Interconnection

Composition Engine

HCIA-IoT V2.5 12 CC BY 4.0

Chapter 4. Overview of Common IoT Communications Technologies

A. Check the correct answer, there is only one correct answer for each question:

1. One of the following is not a wired communication technology:

A. Ethernet B. LTE

C. PLC D. USB

2. One of the following is not a wireless communication technology:

A. Wi-Fi B. Zigbee

C. LoRa D. RS-232

3. Which of the following is not considered as a cellular mobile network technology?

A. UMTS B. GSM

C. PLC D. LTE

4. Which of the following is(are) considered as short-range wireless communication

technology(ies):

A. Wi-Fi B. Zigbee

C. Bluetooth D. All of them

5. LTE-Advanced Pro belongs to:

A. 2G B. 3G

C. 4G D. 5G

6. One of the following is not a 3G technology:

A. UMTS B. GPRS

C. HSPA D. HSPA+

HCIA-IoT V2.5 13 CC BY 4.0

Chapter 4. Overview of Common IoT Communications Technologies

7. GSM data rate is in the range of:

A. kbit/s B. Mbit/s

C. Gbit/s D. Tbit/s

8. 5G connection density is:

A. 104 connections/km2 B. 105 connections/km2

C. 106 connections/km2 D. 107 connections/km2

9. 5G supports mobility at the speed of:

A. 200 km/h B. 300 km/h

C. 400 km/h D. 500 km/h

10. One of the following is not a 3G technology:

A. FDMA B. TD-SCDMA

C. CDMA2000 D. WCDMA

11. AR, VR and MR are supported in the:

A. 3G B. 4G

C. 5G D. All of them

12. In which of the following LPWA technology, the coverage can extends to 50 km?

A. SigFox B. LoRa

C. NB-IoT D. eMTC

13. The bandwidth used for LPWA NB-IoT is:

A. 180 MHz B. 180 kHz

C. 18 MHz D. 18 kHz

HCIA-IoT V2.5 14 CC BY 4.0

Chapter 4. Overview of Common IoT Communications Technologies

14. LPWA NB-IoT supports mobility scenarios with a speed less than:

A. 80 km/h B. 100 km/h

C. 200 km/h D. 500 km/h

15. eMTC is developed by:

A. Nokia B. Ericsson

C. Huawei D. None of them

16. Which of the following has the lowest typical transmission rate?

A. SigFox B. LoRa

C. NB-IoT D. eMTC

17. Video surveillance requires:

A. Low data rate and high B. High data rate and high
bandwidth
bandwidth

C. High data rate and low bandwidth D. Low data rate and low bandwidth

18. Smart meter applications require:

A. High data rate B. High bandwidth

C. None of them D. Both of them

19. Which of the following require 5G?

A. Video surveillance B. IoV

C. None of them D. Both of them

HCIA-IoT V2.5 15 CC BY 4.0

Chapter 4. Overview of Common IoT Communications Technologies

20. Small packet and short-range technologies includes:

A. eMTC B. LoRa

C. Z-Wave D. SigFox

HCIA-IoT V2.5 16 CC BY 4.0

Chapter 5. NB-IoT Communication Technologies and Solutions

A. Check the correct answer, there is only one correct answer for each question:

1. LPWA stands for:

A. Long-Power Wide-Area B. Low-Power Wide-Area

C. Large-Power Wide-Area D. Low-Person Wide-Area

2. Power transmission gain in the basic version of LPWA was:

A. 20 dB B. 10 dB

C. 5 dB D. 25 dB

3. NB-IoT and NR technologies:

A. Work separately only B. Can coexist

C. Interfere with each other D. None of them

4. Boudica 150 chip supports:

A. Multicast B. Downlink: 21.2 kbps,

uplink: 15.6 kbps

C. Positioning D. All of them

5. One of the following is not true about Boudica 120, it:

A. Supports paging B. Has 20 dB coverage enhancement

C. Supports IP only D. Supports single tone

6. At the physical layer of NB-IoT, the bandwidth is:

A. 150 kHz B. 180 kHz

C. 120 kHz D. 200 kHz

HCIA-IoT V2.5 17 CC BY 4.0

Chapter 5. NB-IoT Communication Technologies and Solutions

7. At the physical layer of NB-IoT, uplink technology is:

A. OFDMA B. SC-FDMA

C. TDMA D. CDMA

8. One of the following is not an NB-IoT feature:

A. Ultra-low cost B. Massive connections

C. Ultra-high power consumption D. Ultra-wide coverage

9. NB-IoT deployment mode(s) is(are):

A. Standalone B. Guard band

C. In-band D. All of them

10. Standalone deployment mode is used with:

A. GSM B. UTMS

C. LTE D. All of them

11. Kirin 4G chip supports:

A. Broadband B. High bit rate

C. Full duplex D. All of them

12. PSM consumption pattern can last up to:

A. 300 hours B. 210 hours

C. 310 hours D. 350 hours

13. Deep coverage solution provides gain increasing by:

A. 5 dB B. 11 dB

C. 20 dB D. 25 dB

HCIA-IoT V2.5 18 CC BY 4.0

Chapter 5. NB-IoT Communication Technologies and Solutions

14. NB-IoT gain in the repeated transmission is:

A. Decreased both in the uplink and B. Increased both in the uplink and
downlink
downlink

C. Increased in the uplink only D. Increased in the downlink only

15. Which of the following technologies has the highest maximum coupling loss?

A. LTE B. GPRS

C. NB-IoT D. GSM

16. NB-IoT increases battery life to be:

A. 5 years B. 7 years

C. 10 years D. 12 years

17. Which of the following is the number of connection per cells supported by NB-IoT?

A. 5000 B. 50 000

C. 100 000 D. 150 000

18. One of the following is not true about NB-IoT:

A. Evolution is based on the live B. Operator-level reliability

network

C. High security D. Local roaming

19. NB-IoT solution architecture includes:

A. 3 layers B. 4 layers

C. 5 layers D. None of them

HCIA-IoT V2.5 19 CC BY 4.0

Chapter 5. NB-IoT Communication Technologies and Solutions

20. Which of the following solution can include NB-IoT?

A. Smart parking B. Shared bikes

C. Smart streetlamp D. All of them

HCIA-IoT V2.5 20 CC BY 4.0

Chapter 6. 5G Communication technologies and solution

A. Check the correct answer, there is only one correct answer for each question:

1. 3GPP process of the 5G standardization started in:

A. Release 14 B. Release 15

C. Release 16 D. Release 17

2. Which of the following standard(s) can benefit from the 5G?

A. WiMax B. WCDMA

C. LTE D. All of them

3. One of the following is not true about the 5G, it provides:

A. Global unified standardization B. Global roaming

C. Massive connections D. Bit rate up to 1Tbit/s

4. Compared to LTE, the throughput of the 5G is:

A. 10 times greater B. 100 times greater

C. 1000 times greater D. None of them

5. Compared to LTE, the number of connections of 5G is:

A. The same B. 10 times greater

C. 100 times greater D. 1000 times greater

6. In 5G, the latency is around:

A. 0.1 msec B. 1 msec

C. 10 msec D. 100 msec

HCIA-IoT V2.5 21 CC BY 4.0

Chapter 6. 5G Communication technologies and solution

7. How many connections per km2 can a 5G network support?

A. 103 B. 104

C. 105 D. 106

8. In terms of spectral efficiency, and compared to IMT-advanced, IMT-2020 can provide:

A. The same efficiency B. Less efficiency

C. 3 Times more D. 10 Times more

9. Which of the following is not true about 5G? it:

A. Uses low and high frequency B. Creates one physical network for
bands hundreds of industries

C. Has an improved spectral D. Has massive energy

consumption
efficiency

10. eNB stands for:

A. enhanced NodeB B. evolved NodeB

C. enhanced Narrow Band D. evolved Narrow Band

11. Which of the following service(s) is(are) provided by the 5G core network?

A. Control and user plane separation B. Mobile edge computing

C. Network slicing D. All of them

12. Which of the following technology(ies) is(are) supported by the 5G New Radio?

A. Half duplex B. CDMA

C. Both of them D. None of them

HCIA-IoT V2.5 22 CC BY 4.0

Chapter 6. 5G Communication technologies and solution

13. Which of the following multiplexing technologies does massive MIMO use?

A. Spatial B. Time

C. Code D. Frequency

14. One of the following is not true about the 5G frequency bands:

A. C-band is mainly used for B. 5G can use bands above 6 GHz

capacity expansion

C. 28 GHz band can be used for D. Visible light bands are

supported
industrial purposes

15. One of the following is not true about the sub-6 GHz, it is used for:

A. Higher bit rate B. Coverage

C. Mobility D. Connectivity

16. Which of the following is not true about 5G full spectrum?

A. Sub-6 GHz low frequency bands B. High frequency bands are

serve as the core spectrum supplementary

C. Sub-6 GHz is used for higher rate D. C-band is mainly used for
capacity expansion

17. eMBB stands for:

A. Enhanced Mobile BroadBand B. Evolved Mobile BroadBand

C. Electronic Mobile BroadBand D. Enhanced Mobile BaseBand

18. Which one of the following is not a reality-based technology?

A. Virtual Reality B. Augmented Reality

C. Supported Reality D. Mixed Reality

HCIA-IoT V2.5 23 CC BY 4.0

Chapter 6. 5G Communication technologies and solution

19. URLLC scenarios require:

A. Ultra-low reliability and ultra-low B. Ultra-high reliability and ultra-

low latency
latency

C. Ultra-low reliability and ultra- D. Ultra-high reliability and ultra-

high latency high latency

20. Which of the following 5G application scenario(s) is(are) defined by ITU?

A. eMBB B. mMTC

C. URLLC D. All of them

HCIA-IoT V2.5 24 CC BY 4.0

Chapter 7. Huawei IoT Gateways (Industrial + Home)

A. Check the correct answer, there is only one correct answer for each question:

1. Which of the following is not true about industrial-grade routers? they are:

A. Designed to work in temperature: B. Dustproof

-40°C to +70°C

C. Waterproof D. Weak against

electromagnetic
interference

2. Industrial IoT gateways sit in-between:

A. Network and terminal devices B. Network and application

C. Application and terminal devices D. None of them

3. Which of the following is(are) a core-benefit of edge computing?

A. Real-time services B. Data aggregation

C. Processing at the edge D. All of them

4. One of the following is not distributed in the network by edge computing technologies:

A. Computing B. Storage

C. Coverage D. Security

5. How many domains are considered in the edge computing architecture?

A. 3 B. 4

C. 5 D. 6

6. One of the following is not true about star topology, it is/has:

A. Easy control B. Low cost

C. Simple structure D. Short latency

HCIA-IoT V2.5 25 CC BY 4.0

Chapter 7. Huawei IoT Gateways (Industrial + Home)

7. Which of the following is true about the star topology?

A. Low cost B. High reliability

C. High network latency D. Poor resource sharing capability

8. Which of the following is not true about the ring topology?

A. Closed B. Difficult to extend

C. High reliability D. Difficult to locate faulty nodes

9. Which of the following is not true about the bus topology?

A. Complex structure B. Easy to expand

C. Difficult to locate faulty nodes D. Small number of cables are linked

10. Which of the following is not true about the mesh topology?

A. Rapid deployment B. Resilient to damage

C. Has a control center D. No preset infrastructure

11. Which of the following topologies is adopted by Huawei RF technology?

A. Mesh B. Bus

C. Star D. Ring

12. Nowadays, home network topology is:

A. Star B. Mesh

C. Ring D. Bus

HCIA-IoT V2.5 26 CC BY 4.0

Chapter 7. Huawei IoT Gateways (Industrial + Home)

13. Which of the following is not true about future IoT home networks? it:

A. Requires accessing broadband B. Uses fiber optics

connection

C. Has a mesh topology D. Has a low-processing ability

14. Which of the following is not a device used in the IoT home network?

A. STB B. Smart gateway

C. NodeB D. Wi-Fi repeater

15. Which of the following technology(ies) can be used to extend Wi-Fi coverage in the
IoT home network?

A. PLC B. Wireless repeater

C. Ethernet AP D. All of them

16. In the smart ONT solution, which of the following technology is not used inside homes?

A. USB dongle B. ZigBee

C. Z-Wave D. LTE

17. In the Huawei smart home solution, the plug-in download service is provided by:

A. The smart terminal devices B. The open platform

C. The smart gateway D. Control and management

applications

18. Which of the following is not true about Huawei HiLink platform? it is:

A. Open B. Simple to use

C. Jointly constructed D. Expensive

HCIA-IoT V2.5 27 CC BY 4.0

Chapter 7. Huawei IoT Gateways (Industrial + Home)

19. Which of the following is(are) part(s) of the Huawei HiLink access?

A. HiLink module B. HiLink SDK

C. HiLink router D. All of them

20. How many connection modes are supported in the Huawei HiLink solution?

A. 2 B. 3

C. 4 D. 5

HCIA-IoT V2.5 28 CC BY 4.0

Chapter 8. IoT Platform

A. Check the correct answer, there is only one correct answer for each question:

1. One of the following is not a requirement for IoT platform:

A. Device access decoupling B. Coverage

C. Security D. Reliability

2. How many sublayers are there in the functional architecture of the Huawei IoT
platform?

A. 2 B. 3

C. 4 D. 5

3. Which of the following is(are) an accepted data format(s) for Huawei IoT platform?

A. JSON only B. Binary only

C. None of them D. Both of them

4. One of the following is not a category of an IoT device access service:

A. Device connectivity B. Data forwarding

C. IoT Edge D. Application integration

5. One of the following is not true about the IoT device access in the Huawei platform, it
supports:

A. Multiple access modes B. Multi-network access

C. Multi-protocol access D. Multiplexing modes

6. If the HTTP client first message has the sequence field set to X, the ACK field in the
server response will be set to:

A. X B. X-1

C. X+1 D. None of them

HCIA-IoT V2.5 29 CC BY 4.0

Chapter 8. IoT Platform

7. Which of the following is not true about HTTP? it is:

A. Stateless B. Asynchronous

C. Heavy weight D. Not suitable for restricted network

8. If MQTT is used, how many message(s) is(are) to be exchanged between the client and
the server before sending the first publish message?

A. 1 B. 2

C. 3 D. 4

9. CoAP stands for:

A. Constrained Access Point B. Constrained Application Protocol

C. Coverage Application Protocol D. None of them

10. Which of the following is not a typical IoT protocol?

A. CoAP B. HTTP

C. MQTT D. FBB

11. Devices that do not use TCP/IP protocol stack:

A. Can not connect the IoT platform B. Use a gateway with an integrated
IoT device SDK

C. Use a gateway with an integrated D. None of them

IoT device tiny SDK

12. IoT device SDK does not support:

A. C B. R

C. Java D. C#

HCIA-IoT V2.5 30 CC BY 4.0

Chapter 8. IoT Platform

13. Which of the following is(are) used by the IoT platform to deliver commands?

A. Delayed delivery B. Synchronous delivery

C. None of them D. Both of them

14. Which of the following is(are) supported trigger(s) in the IoT platform?

A. Time-based B. Event-based

C. Data-based D. All of them

15. Which of the following is true about the IoT platform? it supports:

A. Hardware upgrade only B. Hardware and software upgrades

C. Firmware upgrade only D. Software and firmware upgrades

16. One of the following is not true about IoT data:

A. Huge volume B. High quality

C. Low value density D. High time sensitivity

17. How many data categorizations are included in the Multi-temperature management?

A. 2 B. 3

C. 4 D. 5

18. Which of the following is the correct sequence for managing warm data?

A. Cleansing, storage, B. Storage, cleansing, analysis,

analysis, visualization
visualization

C. Analysis, storage, cleansing, D. Visualization, analysis, storage,

visualization cleansing

HCIA-IoT V2.5 31 CC BY 4.0

Chapter 8. IoT Platform

19. One of the following is not a common IoT data problem:

A. Duplicate data B. High-quality data

C. Format differences D. Noise interference

20. Which of the following is(are) character(s) of Huawei cloud IoT platform?

A. Access agnostic B. Scalable

C. None of them D. Both of them

HCIA-IoT V2.5 32 CC BY 4.0

Chapter 9. IoT Platform Secondary Development

A. Check the correct answer, there is only one correct answer for each question:

1. Which of the following is not true about the product model?

A. It is also called “profile” B. It defines the properties of a

device

C. It is created using codes D. It defines what can a device do

2. A product model includes:

A. Product details B. Service capabilities

C. None of them D. Both of them

3. Which of the following is not done by the codec?

A. Encodes binary data into JSON B. Decodes data in JSON format into
format binary data

C. None of them D. Both of them

4. Which of the following is not true about codec development? it is:

A. Graphical B. Written using C++

C. Offline D. Script-based

5. Which of the following can not be performed by application-side API?

A. View the application access B. Report binary data

address on the console

C. Create and manage products D. Deliver commands, properties

and messages

HCIA-IoT V2.5 33 CC BY 4.0

Chapter 9. IoT Platform Secondary Development

6. One of the following is not an API action:

A. ADD B. GET

C. PUT D. DELETE

7. Which of the following is not a parameter used in the API messages?

A. Path B. Data

C. Header D. Query

8. Which of the following methods is used by the application access authentication?

A. POST B. GET

C. PUT D. DELETE

9. What is the status code in the response of the application access authentication?

A. 200 B. 201

C. 202 D. 203

10. PUT Method is used to:

A. Application access authentication B. Querying device messages

C. Create a device D. Modify device information

11. Which of the following device development method is not supported by Huawei cloud
IoT?

A. Certified sensor B. Certified module

C. Certified MCU D. LiteOS

HCIA-IoT V2.5 34 CC BY 4.0

Chapter 9. IoT Platform Secondary Development

12. Which of the following device development methods is supported by Huawei cloud
IoT?

A. Certified sensor B. Certified module

C. Certified MCU D. LiteOS

13. Common development on the device side requires the use of:

A. Certified MCU and B. MCU/single-chip microcomputer

communications module only

C. MCU/single-chip microcomputer and D. Certified MCU only

communications module

14. Immediate delivery of MQTT device messages is achieved using:

A. IoT device B. IoT platform

C. IoT application D. All of them

15. Which of the following is true about device property reporting in JSON format?

A. It requires a codec B. It does not require a codec

C. It is not possible D. None of them

16. Which of the following protocol(s) can be used for authentication for devices?

A. Native MQTT B. LwM2M over CoAP

C. MQTTS D. All of them

17. When deleting a device successfully, the returned code is:

A. 201 B. 202

C. 203 D. 204

HCIA-IoT V2.5 35 CC BY 4.0

Chapter 9. IoT Platform Secondary Development

18. In which of the following API operation(s) a token is returned?

A. Application access authentication B. Device creating

C. None of the them D. Both of them

19. IAM service is only used when:

A. Creating a device B. Authenticating application access

C. Deleting a device D. None of them

20. Which of the following device development method is used if the device includes an
SDK Tiny?

A. Certified MCU B. Gateway

C. Common D. LiteOS

HCIA-IoT V2.5 36 CC BY 4.0

Chapter 10. IoT OS

A. Check the correct answer, there is only one correct answer for each question:

1. The OS manages and controls all resources of:

A. Software and hardware B. Software only

C. Hardware only D. Firmware

2. CPU includes:

A. Input devices B. Output devices

C. None of them D. Both of them

3. One of the following is not a peripherals hardware in the microcomputer system:

A. CD-ROM B. Keyboard

C. Printer D. ROM

4. ALU is included within:

A. CPU B. RAM

C. ROM D. CD-ROM

5. DOS is a(n):

A. Central processing unit B. Operating system

C. Output device D. Main memory

6. One of the following is not an operating system type:

A. Patch OS B. Time-sharing OS

C. Complex OS D. Real-time OS

HCIA-IoT V2.5 37 CC BY 4.0

Chapter 10. IoT OS

7. Time-sharing OS developed to:

A. Real-Time OS B. Network OS

C. Distributed OS D. Multi-job OS

8. IoT OS should be able to handle connections up to:

A. 1 billions B. 10 billions

C. 100 billions D. None of them

9. Which of the following hardware technology(ies) is(are) supported by the IoT OS?

A. DSP B. MIPS

C. FPGA D. All of them

10. Which of the following is not a challenge to the IoT terminal development?

A. Multi-sensor coordination that is B. High requirements on

complex to manage performance

C. Power consumption for videos D. Various IoT platform

11. How many kernel(s) does Huawei LiteOS includes?

A. 1 B. 2

C. 3 D. 4

12. Which of the following is true about security in the Huawei LiteOS? it is implemented:

A. In the kernel layer B. In the middleware layer

C. Across model’s layers D. In the open API layer only

HCIA-IoT V2.5 38 CC BY 4.0

Chapter 10. IoT OS

13. Huawei LiteOS became open to consumers on:

A. 2010 B. 2011

C. 2012 D. 2013

14. In which year Huawei LiteOS entered the IoT field?

A. 2014 B. 2015

C. 2017 D. 2018

15. Which of the following solution(s) implement Huawei LiteOS?

A. Smart home B. Smart water meter

C. Smart parking D. All of them

HCIA-IoT V2.5 39 CC BY 4.0

Chapter 11. Sensing Layer development

A. Check the correct answer, there is only one correct answer for each question:

1. Which of the following elements is used to record previous results and subsequent
instructions?

A. Multiplexer B. Register

C. Mux D. None of them

2. LDR ARM instructions is used to:

A. Addition B. Subtraction

C. Data transfer from D. Exclusive OR

memory to register

3. Standard MPUs have a system clock speed of:

A. 3 MHz B. 300 MHz

C. 3 GHz D. 300 GHz

4. Standard MCUs have a system clock speed that ranges between 10 and 100:

A. kHz B. MHz

C. GHz D. None of them

5. The system bus in the MCU architecture includes:

A. Control bus B. Address bus

C. Data bus D. All of them

6. Under which of the following senses the chemical sensor is classified?

A. Vision sense B. Auditory sense

C. Taste sense D. Olfactory sense

HCIA-IoT V2.5 40 CC BY 4.0

Chapter 11. Sensing Layer development

7. In terms of basic sensing functions, which of the following is not a type of senses?

A. Color B. Taste

C. Touch D. Magnet

8. How many classes are used to classify temperature sensors?

A. 2 B. 3

C. 4 D. 5

9. Which of the following is not a type of heart rate sensor?

A. Piezoelectric B. Photoelectric

C. Piezoresistive D. Photoresistive

10. The process where the CPU stops to execute a new program is called:

A. Task B. Allocation

C. Interrupt D. None of them

11. A task can be:

A. Created B. Deleted

C. Delayed D. All of them

12. One of the following is not a disadvantage of the dynamic memory use:

A. High performance overheads B. Fragments in the memory pool

C. Memory is wasted if there are D. Large blocks are cost-effective

many small blocks

HCIA-IoT V2.5 41 CC BY 4.0

Chapter 11. Sensing Layer development

13. An interrupt can be:

A. Deleted B. Delayed

C. None of them D. All of them

14. Which of the following is not an inter-task communication?

A. Queue B. Stack

C. Semaphore D. Mutex

15. Which of the following is not true about events?

A. It is a synchronization inter-task B. It involves data transmission

communication

C. Events are independent from each D. An event is not associated with a

other. task

16. When the number of tasks accessing the same resource reaches the maximum, the
semaphore:

A. Blocks other tasks from accessing the B. Release all resources

resource

C. Execute all the tasks D. All of them

17. How many statuses does the mutex have?

A. 2 B. 3

C. 4 D. 5

18. A mutex is locked when:

A. Two tasks are competing on it B. A task owns it

C. None of them D. Both of them

HCIA-IoT V2.5 42 CC BY 4.0

Chapter 11. Sensing Layer development

19. Huawei LiteOS provides:

A. Hardware timers B. Software timers

C. Firmware timers D. All of them

20. Which of the following is true about Huawei LiteOS kernel features?

A. Low power consumption B. Strong performance

C. Ultra-small kernel of less than D. All of them

6 kB

HCIA-IoT V2.5 43 CC BY 4.0

Chapter 12. AT Commands for Communication Modules

A. Check the correct answer, there is only one correct answer for each question:

1. AT commands stands for:

A. ATtention commands B. Adapter Terminal commands

C. Adapter Technical commands D. ATtraction commands

2. AT commands are:

A. Sent from terminal equipment B. Sent to a terminal equipment

C. Sent from a mobile terminal D. All of them

3. AT commands are used within:

A. NB-IoT networks only B. Wi-Fi networks only

C. NB-IoT and Wi-Fi networks D. Bluetooth networks only

4. How many categories are there for AT commands?

A. 2 B. 3

C. 4 D. 5

5. AT command type "=XX" is used to:

A. Display valid parameter values B. Set the attributes carried in the

AT command
set by other AT commands

C. Query attributes set by other D. Instruct a module to execute a

AT commands specific function

6. Read command is referred to as:

A. "=XX" B. "=?"

C. "?" D. Null

HCIA-IoT V2.5 44 CC BY 4.0

7. AT execution command is used to:

A. Display valid parameter values B. Set the attributes carried in the

set by other AT commands AT command

C. Query attributes set by other D. Instruct a module to execute a

specific function
AT commands

8. Which of the following AT commands can be used with and without parameters?

A. Set B. Test

C. Read D. Execution

9. For which of the following command set the syntax "AT+<x>=?" is used?

A. Set B. Test

C. Read D. Execution

10. "AT+CGSN" is an example for a :

A. Set command B. Test command

C. Execution command with D. Execution command

without parameters
parameters