Scribd
Upload
74 views2 pages

Antenna TEV

The TEV sensor is a partial discharge sensor designed for high sensitivity. It uses capacitive coupling to detect electric signals from partial discharge activity on metallic surfaces. The compact and robust sensor can be magnetically coupled to openings on switchgear cases to monitor for partial discharges. Optional equipment can further improve the sensor's sensitivity. The sensor is small, lightweight, and easy to install directly on medium voltage switchgear equipment to monitor for partial discharges.

Uploaded by

chiranjib_k
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
74 views2 pages

Antenna TEV

The TEV sensor is a partial discharge sensor designed for high sensitivity. It uses capacitive coupling to detect electric signals from partial discharge activity on metallic surfaces. The compact and robust sensor can be magnetically coupled to openings on switchgear cases to monitor for partial discharges. Optional equipment can further improve the sensor's sensitivity. The sensor is small, lightweight, and easy to install directly on medium voltage switchgear equipment to monitor for partial discharges.

Uploaded by

chiranjib_k
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Data Sheet

high performance
TEV PD sensors TEV
(Transient Earth Voltage)
TEV sensor is a partial discharge sensor whose
working principle is based on a direct Capacitive
coupling with a Switchgears earthed metal case. The
two ends of TEV sensor can be coupled magnetically
to virtually any opening on a metal surface. It picks up
the electric signal given by PD activity onto the two
metallic surfaces. Thanks to its special design has
high sensitivity, larger than other single ended TEV
sensors. His compact and robust design (passive
sensor) makes the TEV the optimal sensor for direct
installation on medium voltage Switchgears.

Optionally amplifiers and signal conditioning devices


are available by Techimp to further improve
sensitivity.

TEV Installations Specifications

Switchgears: TEV sensor is positioned across the


opening of the metallic case of the switchgear, with
the two ends of the sensor in direct contact with the
metallic surface. The contact is ensured by magnetic
coupling.

Specifications

Bandwidth: 0.1 MHz- 300 MHz, stand alone sensor


Techimp Frequency Shifter recommended (with PDCheck)
Working principle: Capacitive coupling
Overall Dimensions: 130 x 70 x 25 mm
Weight (without the RF cable): 80 g
Connector: BNC
Power Supply: Only for optional devices (frequency shifter)
Installation: Coupled to the earthed metallic case of Switchgears
Operational limits: Env. Temp: 0-650C; Env. RH: 0-100%
Antenna TEV DATA SHEET [ENG] – REV.20200324

TECHIMP - ALTANOVA GROUP ISA - ALTANOVA GROUP intelliSAW - ALTANOVA GROUP


Via Toscana 11, Via Prati Bassi 22, 100 Burtt Rd
40069 Zola Predosa (Bo) - Italy 21020 Taino (Va) - Italy Andover, MA 01810, USA
T +39 051 199 86 050 T +39 0331 95 60 81 T +1 978-409-1534
Email [email protected] Email [email protected] Email [email protected]

The product and the information contained herein may be changed at any time without prior notification. This document nor any parts thereof may not be reproduced or
transmitted in any form either electronically or mechanically, including photocopying and recording, without the express written consent of Techimp - Altanova Group Srl

You might also like