The LM324 is a quadruple operational amplifier integrated circuit that can operate from a single power supply over a wide voltage range. It consists of four independent high-gain op-amps that are internally compensated. Typical applications include transducer amplifiers, DC gain blocks, and conventional op-amp circuits. It has features such as low power supply current drain independent of supply voltage, low input offset voltage and current, and high DC voltage gain.
The LM324 is a quadruple operational amplifier integrated circuit that can operate from a single power supply over a wide voltage range. It consists of four independent high-gain op-amps that are internally compensated. Typical applications include transducer amplifiers, DC gain blocks, and conventional op-amp circuits. It has features such as low power supply current drain independent of supply voltage, low input offset voltage and current, and high DC voltage gain.
The LM324 is a quadruple operational amplifier integrated circuit that can operate from a single power supply over a wide voltage range. It consists of four independent high-gain op-amps that are internally compensated. Typical applications include transducer amplifiers, DC gain blocks, and conventional op-amp circuits. It has features such as low power supply current drain independent of supply voltage, low input offset voltage and current, and high DC voltage gain.
The LM324 is a quadruple operational amplifier integrated circuit that can operate from a single power supply over a wide voltage range. It consists of four independent high-gain op-amps that are internally compensated. Typical applications include transducer amplifiers, DC gain blocks, and conventional op-amp circuits. It has features such as low power supply current drain independent of supply voltage, low input offset voltage and current, and high DC voltage gain.
DESCRIPTION The LM324 consists of four independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage. Application areas include transducer amplifiers, DC gain blocks and all the conventional op amp circuits.
FEATURES
Wide range of supply voltages
Low supply current drain independent of supply voltage Low input biasing current PIN1 Low input offset voltage and offset current Input common-mode voltage range includes ground SOP14 Differential input voltage range equal to the power supply voltage DC voltage gain 100 V/ mV Typ Internally frequency compensation
PIN1 DIP14 PACKAGE INFORMATION
http://www.hgsemi.com.cn 1 2019 OCT
LM324
ELECTRICAL CHARACTERISTICS at specified free-air temperature, VCC = 5V (unless otherwise noted) LM324 PARAMETER TEST CONDITIONS* UNIT MIN TYP MAX VIO Vcc =5V to MAX, 25 С 3 7 mV Input offset voltage VIC = VICR min, Full temperature 9 VO=1.4V range αVIO Full temperature 7 µV/C Average temperature coefficient of input offset range voltage IIO Vo=1.4V 25 С 2 50 nA Input offset current Full temperature 150 range αIIO Full temperature 10 pA/C Average temperature coefficient of input offset range current IIB Vo=1.4V 25 С -20 -250 nA Input bias current Full temperature -500 range VICR Vcc = 5V to MAX 25 С 0 to Vcc-1.5 V Common-mode input voltage range Full temperature 0 to Vcc - 2 range VOH RL = 2 k 25 С Vcc-1.5 V High-level output voltage Vcc = MAX, RL =2k Full temperature 26 range Vcc = MAX, Full temperature 27 28 RL = 10 k range VOL RL = 10 k Full temperature 5 20 mV Low-level output voltage range AVD Vcc = 15 V, 25 С 25 100 V/mV Large-signal differential voltage amplification Vo=1V to 11 V, Full temperature 15 RL 2 k range CMRR Vcc = 5V to MAX, 25 С 65 80 dB Common-mode rejection ratio VIC = VICR min kSVR Supply voltage rejection ratio (Vcc/VIO) Vcc = 5V to MAX 25 С 65 100 dB
Vo1/Vo2 Crosstalk attenuation f=1kHz to 20 kHz 25 С 120 dB
IO Vcc = 15 V, 25 С -20 -30 mA Output current VID=1V,Vo= 0 Full temperature -10 range Vcc = 15 V, 25 С 10 20 VID= -1V, Vo=15V Full temperature 5 range VID= -1V, Vo = 200 mV 25 C 12 30 µA los Vcc at 5 V, 25 С ±40 ±60 mA Short-circuit output current GND at -5V,Vo=0 Icc Vo = 2.5 V, No load Full temperature 1.5 2.4 mA range Supply current (four amplifiers) Vcc = MAX, Vo = 0.5Vcc, No Full temperature 1.1 3 load range * All characteristics are measured under open loop conditions with zero common-mode input voltage unless otherwise specified. "MAX" Vcc for testing purposes is 30 V. Operating temperature -40 ÷ 85° C, MAX Junction temperature + 125°C. 1
http://www.hgsemi.com.cn 2 2019 OCT
LM324 PACKAGE SOP14
Q B A C1 C
A1
D a b 0.25
UNIT:mm DIM. MIN TYP MAX DIM. MIN TYP MAX A 4.520 4.570 4.620 a 0.400 0.420 0.440 A1 0.100 - 0.250 b 1.260 1.270 1.280 B 8.500 8.750 9.000 Q 0° - 8° C 5.800 6.100 6.250 C1 3.800 3.900 4.000 D 0.400 - 0.950
DIP14
http://www.hgsemi.com.cn 3 2019 OCT
LM324 Important statement: Huaguan Semiconductor Co,Ltd. reserves the right to change the products and services provided without notice. Customers should obtain the latest relevant information before ordering, and verify the timeliness and accuracy of this information. Customers are responsible for complying with safety standards and taking safety measures when using our products for system design and machine manufacturing to avoid potential risks that may result in personal injury or property damage. Our products are not licensed for applications in life support, military, aerospace, etc., so we do not bear the consequences of the application of these products in these fields. Our documentation is only permitted to be copied without any tampering with the content, so we do not accept any responsibility or liability for the altered documents.
http://www.hgsemi.com.cn 4 2019 OCT
