MTK is a self-adhering waterproofing membrane designed especially for pavement
reflective crack control and as a moisture barrier to prevent water permeation or
penetration through pavement surfaces and the subsequent damage that moisture causes in the roadway sub-base
MTK is a self-adhering waterproofing membrane designed especially for pavement
reflective crack control and as a moisture barrier to prevent water permeation or
penetration through pavement surfaces and the subsequent damage that moisture causes in the roadway sub-base
MTK is a self-adhering waterproofing membrane designed especially for pavement
reflective crack control and as a moisture barrier to prevent water permeation or
penetration through pavement surfaces and the subsequent damage that moisture causes in the roadway sub-base
MTK is a self-adhering waterproofing membrane designed especially for pavement
reflective crack control and as a moisture barrier to prevent water permeation or
penetration through pavement surfaces and the subsequent damage that moisture causes in the roadway sub-base
Mirafi® MTK Mirafi® MTK is a self-adhering waterproofing membrane designed especially for pavement reflective crack control and as a moisture barrier to prevent water permeation or penetration through pavement surfaces and the subsequent damage that moisture causes in the roadway sub-base.
TenCate Geosynthetics Americas Laboratories are accredited by Geosynthetic
Accreditation Institute – Laboratory Accreditation Program (GAI-LAP). Minimum Average Mechanical Properties1 Test Method Unit Roll Value Thickness ASTM D17772 mils (mm) 65 (1.7) Grab Tensile Strength ASTM D4632 lbs (N) 160 (712) Grab Tensile Elongation ASTM D4632 % 60 Puncture Strength ASTM E154 lbs (N) 200 (890) ASTM E96, Permeance perms 0.05 (max) Method B Strip Tensile ASTM D882 lbs/in (kN/m) 50 (8.8) Strip Elongation ASTM D882 % 50 Melting Point ASTM D276 F° (C°) 325 (163) ASTM D146 Pliability ¼” Mandrel No cracks in fabric or rubberized asphalt 180 ̊ @ -25 ̊ F 1 Testing performed on composite 2 ½” Presser Foot
Physical Properties Unit Typical Value
Roll Dimensions (width) in (m) 12 (0.3) 18 (0.5) 24 (0.6) 36 (0.9) Roll Dimensions (length) ft (m) 200 (61) 200 (61) 100 (30) 50 (15.2) Roll Per Box each 1 1 1 1
Disclaimer: TenCate assumes no liability for the accuracy or completeness of this information or for the ultimate use by the purchaser. TenCate disclaims any and all express, implied, or statutory standards, warranties or guarantees, including without limitation any implied warranty as to merchantability or fitness for a particular purpose or arising from a course of dealing or usage of trade as to any equipment, materials, or information furnished herewith. This document should not be construed as engineering advice.
Mechanical Properties and Performance of Engineering Ceramics and Composites X: A Collection of Papers Presented at the 39th International Conference on Advanced Ceramics and Composites
