Hi-TECH 230-4 (9.0)

Hi-TECH 230
8-10” Chucker Box Way Type

Horizontal Turning Center
HS-T153-R5.0-20191219
1. Product Overview 3. Detailed Information 4. Main Specifications
3-1 Product Line-up

2. Basic Information
3-2 Standard / Optional
Accessories Status 5. Customer Service
2-1 Basic Structure
3-3 Description of Standard /
2-2 Cutting Area
Contents 2-3 Y-axis Machining

Optional Accessories
3-4 Hwacheon Software

2-4 Main Spindle
3-5 Diagram
2-5 Sub Spindle
- Spindle Power-Torque Diagram
2-6 Tailstock
- Machine Size
2-7 Turret
- Foundation Drawing
2-8 Feed System
- Tooling Diagram
2-9 Cutting Performance
- Turret Interference Diagram
- Moving Range
3-6 Machine / NC Specifications
- Machine Specifications
- NC Specifications
- NC Instruction
3-7 Packing Dimension

HS-T153-R5.0-20191219
1. Product Overview
New Standard for 8-10" Lathe Faithful to the Basics
Hi-TECH 230 provides more reliable machining performance based on excellent machine rigidity and upgraded
specifications compared to the existing 8-10" lathes with box-way structure, and provides greatly enhanced user
convenience and maintainability. The Y-axis model has Y-axis stroke of up to ±60 mm (±2.36 inch), the largest
in class.
 Upgrades for Enhanced Machining Performance  Enhanced User Convenience  Easy Maintenance
① Enhanced feed system rigidity for X and Y axes ① Lighter door to ease the operator's tiredness ① Coolant tank placed at the front and easy
② Enhanced machine structure rigidity ② Structure to prevent chip accumulation in the to remove
③ Upgraded main spindle motor door bottom ② Coolant level sensor applied as standard
④ The highest turnmill motor power in class ③ 90˚ rotating operator panel ③ Use of external coolant block prevents the
⑤ Extended max. bar diameter ④ Optional software for user convenience leakage of turret inside
⑥ Possible to apply the 24 positions index turret (Operating and machining)
HS-T153-R5.0-20191219
2. Basic Information (2-1 Basic Structure)
“Increased Structural Rigidity of the Machine”
via FEM Analysis
Ys-axis
Y-axis The cutting area and the feed zone are separated to
X-axis “Minimize Thermal Displacement of the Frame”

caused by hot chips and coolant
Z-axis
“Slanted Bed Structure”
for easy chip disposal
Max Stroke Rapid Speed

Chuck Size mm (inch) m/min (ipm)
Type inch
X-axis Z-axis Y-axis X-axis Z-axis Y-axis
Hi-TECH 230A/AL/AXL 8
460 (18.11)
Hi-TECH 230B/BL/BXL 240 (9.45) / L:700 (27.56) ±60 (±2.36) 30 (1,181) 30 (1,181) 10 (394)
10 / XL:1,200 (47.24)
Hi-TECH 230C/CL/CXL
*L : Long Bed , XL : Extra Long Bed *Y-axis is YMC / YSMC Type Only.
HS-T153-R5.0-20191219
2. Basic Information (2-2 Cutting Area)
“The Largest Cutting Area in Class”
Max Cutting Dia

Max Cutting Length (b)
Ø 425 mm (Ø 16.73 inch)
Max Cutting Dia (a) Max Cutting Length
1,143 mm (45 inch)

* Based on Hi-TECH 230AXL STD
Max Cutting Dia (a) Max Cutting Length (b)

Type mm (inch) mm (inch)
Hi-TECH 230A/AL/AXL STD Ø 425 (Ø 16.73) 403 / L:643 / XL:1,143 (15.87 / L:25.31 / XL:45)
Hi-TECH 230A/AL/AXL MC/YMC 344 / L:584 / XL:1,084 (13.54 / L:22.99 / XL:42.68)
Ø 400 (Ø 15.75)
Hi-TECH 230AL/AXL SMC/YSMC L:584 / XL:1,084 (L:22.99 / XL:42.68)
Hi-TECH 230B/BL/BXL STD Ø 425 (Ø 16.73) 379 / L:619 / XL:1,119 (14.92 / L:24.37 / XL:44.06)
Hi-TECH 230B/BL/BXL MC/YMC 320 / L:560 / XL:1,060 (12.6 / L:22.05 / XL:41.73)
Ø 400 (Ø 15.75)
Hi-TECH 230BL/BXL SMC/YSMC L:560 / XL:1,060 (L:22.05 / XL:41.73)
Hi-TECH 230C/CL/CXL STD Ø 425 (Ø 16.73) 379 / L:619 / XL:1,119 (14.92 / L:24.37 / XL:44.06)
Hi-TECH 230C/CL/CXL MC/YMC 320 / L:560 / XL:1,060 (12.6 / L:22.05 / XL:41.73)

Ø 400 (Ø 15.75)
Hi-TECH 230CL/CXL SMC/YSMC L:560 / XL:1,060 (L:22.05 / XL:41.73)
*L : Long Bed , XL : Extra Long Bed HS-T153-R5.0-20191219
2. Basic Information (2-3 Y-axis Machining)
Ys-axis The largest Y-axis stroke in class

Y-axis
“Maximized Y-axis Machining Performance”
X-axis
Finishing using Y-axis Multi-face machining
Slanted Bed
Milling at the position deviated Circular interpolation

from the center for X and Y axes
Y-axis stroke Y-axis Rapid Speed Inclination angle (deg)

Type mm (inch) m/min (ipm) Slanted Bed X-axis X-Ys axis
Hi-TECH 230 SERIES Y(S)MC ±60 (±2.36) 10 (394) 30
HS-T153-R5.0-20191219
2. Basic Information (2-4 Main Spindle)
Enhanced high-power motor compared to existing 8-10” lathes
“Enhanced Cutting Performance and Productivity”
application area
of the bar feeder
 Fast and easy to control  placed the main spindle motor in a

the belt tension way to ensure easy application
of the bar feeder
Max Spindle Speed Spindle Motor Spindle Torque Max Bar Size Type of Spindle Nose
Type rpm kW (HP) Nm mm (inch) ASA
Hi-TECH 230A 4,500 330 Ø 65 (Ø 2.56) A2-6

18.5 / 15 (25 / 20)
Hi-TECH 230B 410
3,500 Ø 81 (Ø 3.19) A2-8
Hi-TECH 230C 22 / 18.5 (29 / 25) 703.5
HS-T153-R5.0-20191219
2. Basic Information (2-5 Sub Spindle)
First Process Transfer (Synchronizing) Second Process
Control of synchronization between the main and the sub-spindle allows simultaneous completion of initial/post processing for
maximized productivity
“Process Integrated Machining Realized”
Simultaneous multi-axes control is possible by associating with the turn mill function
“Multiplex Machining Realized Using Sub-spindle”

Chuck Size Max Spindle Speed Sub Spindle Motor Sub Spindle Torque
Type inch rpm kW (HP) Nm
Hi-TECH 230 SERIES 6 5,000 7.5 / 5.5 (10 / 7.4) 86

[OPT : 11 / 7.5 (15 / 10)] [OPT : 126]
*Sub Spindle is Long Type / Extra Long Type Only.
HS-T153-R5.0-20191219
2. Basic Information (2-6 Tailstock)
• Short Type / Long Type
Its digital tailstock (hydraulic) makes setting

materials convenient and implements fast
cycle time as its setting time is shorter than
that of a conventional equipment.
“Setting Time Reduced by 70% or More”

* Comparison of tailstock setting times when
the 200 mm (7.87 inch) material is used
Max Stroke Cylinder Diameter Center Taper

Type mm (inch) mm (inch) MT
Hi-TECH 230A/AL
460 (18.11)
Hi-TECH 230B/BL Ø 65 (Ø 2.56) #5
/ L:700 (27.56)
Hi-TECH 230C/CL
*L : Long Bed
HS-T153-R5.0-20191219
2. Basic Information (2-6 Tailstock)
• Extra Long Type
The Quill is activated by foot pedal or program.
Tailstock body of standard machine can be

positioned by operator.
Standard: Tailstock Body & Quill program (Programmable)
Max Stroke Quill Stroke Cylinder Diameter Center Taper

Type mm (inch) mm (inch) mm (inch) MT
Hi-TECH 230AXL
Hi-TECH 230BXL 1,080 (42.52) 120 (4.72) Ø100 (Ø3.94) #5
Hi-TECH 230CXL
*XL : Extra Long Bed
HS-T153-R5.0-20191219
2. Basic Information (2-7 Turret)
① Its external coolant block prevents leakage (cause of failure) of
the turret inside from the source.
1 ② The largest turnmill motor in class : 5.5 / 3.7 kW

2
③ Extended turret disk width
- Standard model : The disk width extended by 25% compared
to the existing model
- MC model: BMT65 applied
Curvic
④ Enhanced turret rigidity : The reduced distance between the disk

and the curvic coupling decreases the moment imposed on the
curvic by 24%
3 ⑤ Possible to apply the 24 positions index turret
• Double O.D Holder • Double I.D Holder
Tool Size Turret Indexing Max Speed of Disk width

Type Number of Tool Stations mm (inch) Time Rotating Tool mm (inch)
sec/step rpm
STD 12 -
O.D:◻25 (◻1)
MC / SMC 0.344 100(3.94)
12 (24 Positions Index) I.D:Ø 40 (Ø 1.5) 5,000
YMC / YSMC
* The turret indexing time is the individual time based on 12 stations.
HS-T153-R5.0-20191219
2. Basic Information (2-8 Feed System)
Existing 8-10” lathes
The guide way contact area is increased by 40%.

Fixed point of ball screw
“Reinforced Feed System Rigidity”
GIB Mounting
Changed fixed point of X-axis ball screw to minimize area
the machining error.
“Minimized Machining Error Caused by

Thermal Displacement”
“Easy Precision Control Using GIB”
HS-T153-R5.0-20191219
2. Basic Information (2-9 Cutting Performance)
Machine : Hi-TECH 230A / Material : SM45C
O.D Cutting
Cutting
Material Dia Cutting Speed Feed Spindle Speed Material Removal Rate
Depth
mm (inch) m/min (ipm) mm/rev rpm cm3/min
mm (inch)
182 (7.17) 220 (8,661) 0.27 421 6 (0.24) 356.4
I.D cutting
Material Dia Cutting Speed Feed Spindle Speed Cutting Depth

Process
mm (inch) m/min (ipm) mm/rev rpm mm (inch)
Finishing 70.1 (2.76) 150 (5,906) 0.1 680 0.1 (0.004)

Roughing 72.5 (2.85) 100 (3,937) 0.34 428 1 (0.04)
U-Drill
Tool Dia Cutting Speed Feed Spindle Speed Cutting Depth Material Removal Rate
mm (inch) m/min (ipm) mm/rev rpm mm (inch) cm3/min
55 (2.17) 120 (4,724) 0.18 694 50 (1.97) 297
Groove
Cutting Speed Insert Width Feed Material Removal Rate
m/min (ipm) mm (inch) mm/rev cm3/min
150 (5,906) 5 (0.2) 0.25 187.5
* The machining results above are examples based on the factory test standards, and are subjected to the changes in conditions.
HS-T153-R5.0-20191219
2. Basic Information (2-9 Cutting Performance)
Machine : Hi-TECH 230A / Material : SM45C
Turnmill Drill
mm (inch) m/min (ipm) mm/rev rpm mm (inch) cm3/min
20 (0.79) 30 (1,181) 0.1 478 30 (1.18) 15
Turnmill Tap
Cutting Speed Feed Spindle Speed Tapping Depth

Process Tap Size
m/min (ipm) mm/rev rpm mm (inch)
Axial
M16 30 (1,181) 2.0 597 25 (0.98)
(Z-axis)
Face Cutter
mm (inch) m/min (ipm) mm/min rpm mm (inch) cm3/min
63 (2.48) 198 (7,795) 300 1,000 4 (0.16) 75.6
* The machining results above are examples based on the factory test standards, and are subjected to the changes in conditions.
HS-T153-R5.0-20191219
3. Detailed Information (3-1 Product Line-up)
Hi-TECH 230
A / STD A-Type B-Type C-Type B / STD

A / MC B / MC
A / YMC B / YMC
Chuck 8” Chuck 10” Chuck 10”
AL / STD BL / STD BXL / STD
AL / MC BL / MC BXL / MC
AL / YMC BL / YMC BXL / YMC
AL / SMC BL / SMC BXL / SMC
AL / YSMC Short Bed Long Bed XL Bed BL / YSMC BXL / YSMC
AXL / STD C / STD

AXL / MC
STD STD STD C / MC
AXL / YMC C / YMC
AXL / SMC
AXL / YSMC
MC MC MC CL / STD CXL / STD
CL / MC CXL / MC
CL / YMC CXL / YMC
CL / SMC CXL / SMC
YMC YMC YMC CL / YSMC CXL / YSMC
SMC SMC
YSMC YSMC
Ref. 1) L : Long Type 2) XL : Extra Long Type 3) MC : Turnmill [C-Axis (0.0001˚)] 4) S : Sub Spindle 5) Y : Y-axis
HS-T153-R5.0-20191219
3. Detailed Information (3-2 Standard / Optional Accessories Status) S : Standard , Ο : Option , X : Not available
Hi-TECH 230A Hi-TECH 230AL Hi-TECH 230AXL

No. Item Description
STD MC YMC STD MC YMC SMC YSMC STD MC YMC SMC YSMC
1 8 inch S S S S S S S S S S S S S
2 Main Chuck 10 inch X Ⅹ Ⅹ X Ⅹ Ⅹ Ⅹ Ⅹ X Ⅹ Ⅹ Ⅹ Ⅹ
3 No chuck ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
4 6 inch Ⅹ X X Ⅹ X X S S Ⅹ X X S S
Sub Chuck
5 No chuck X X X X X X ○ ○ X X X ○ ○
6 Soft Jaw S S S S S S S S S S S S S
Jaw
7 Hard Jaw ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
8 Chuck Pressure Check Switch ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
9 Dual Pressure (Chuck) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
10 Chucking Dual Pressure (C-axis brake) X ○ ○ X ○ ○ ○ ○ X ○ ○ ○ ○
11 Chuck Pressure Compensation ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
12 Chuck Clamp / Unclamp Switch ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
13 Standard (12 Station turret with Turning Tool only) S X X S X X X X S X X X X
14 BMT65 Turnmill (12 Station turret with Turnmill) X S S X S S S S X S S S S
15 24 Positions (12 Station turret with Turnmill) X S S X S S S S X S S S S
16 Axial Dirven Holder (BMT65) X ○ ○ X ○ ○ ○ ○ X ○ ○ ○ ○
17 Radial Driven Holder (BMT65) X ○ ○ X ○ ○ ○ ○ X ○ ○ ○ ○
18 U-Drill Holder Cap S S S S S S S S S S S S S
19 Double O.D Holder (for 24 Positions , 20X20) (Main / Sub) X ○ ○ X ○ ○ ○ ○ X ○ ○ ○ ○
20 Double O.D Holder (for 24 Positions , 25X25) (Main & Sub) X X X X X X S S X X X S S
21 Double I.D Holder (for 24 Positions, Ø 25) X ○ ○ X ○ ○ ○ ○ X ○ ○ ○ ○
Turret
22 Double I.D Holder (for 24 Positions, Ø 32) X X X X X X S S X X X S S
23 VDI 40 (12 Station turret with 12 positions and Turning Tool only) ○ X X ○ X X X X ○ X X X X
24 VDI 40 Turnmill (12 Station turret with 12 positions) X ○ ○ X ○ ○ ○ ○ X ○ ○ ○ ○
25 VDI 40 O.D Holder ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
26 VDI 40 I.D Holder ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
27 VDI 40 Face Holder ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
28 Axial Dirven Holder (for VDI 40 Turnmill) X ○ ○ X ○ ○ ○ ○ X ○ ○ ○ ○
29 Radial Driven Holder (for VDI 40 Turnmill) X ○ ○ X ○ ○ ○ ○ X ○ ○ ○ ○
30 U-Drill Holder (for VDI 40) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
HS-T153-R5.0-20191219

31 Digital Tailstock (use Hydraulic Cylinder) S S S S S S X X X X X X X
32 Tailstock Servo Tailstock (use Servo motor & Ball screw) ○ ○ ○ ○ ○ ○ X X ○ ○ ○ X X
33 Body & Quill Programmable Tailstock X X X X X X X X S S S X X
Rest Steady for Base

34 Steady Rest *Selecting both the Steady rest base and part catcher X X X X X X X X ○ ○ ○ X X
to be installed is not possible.
35 0.05 MPa S S S S S S S S S S S S S
Coolant Pump 0.6 / 1.5 / 3 / 7 MPa

36 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
*For 7 MPa, only water soluble coolants are available
37 Coolant Gun ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
38 Coolant Blow ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
39 Coolant
Coolant Level Sensor S S S S S S S S S S S S S
40 Options Coolant Chiller ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
41 Oil Skimmer ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
42 Large Capacity Coolant Tank ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
43 Air Blower ○ ○ ○ ○ ○ ○ S S ○ ○ ○ S S
Side / Back Type Chip Conveyor (Hinge / Scraper Type)

44 Chip Disposal *Back type can be used only in short type ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
45 Mist Collector (Interface) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
HS-T153-R5.0-20191219

46 Tool Presetter (Manual / Automation) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
47 Parts Catcher (Main) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Parts Catcher (Sub)
48 *Selecting both sub spindle part catcher and main spindle part X X X X X X X ○ X X X X X
catcher to be installed is not possible.
Workpiece Air Ejector & Through Coolant X X X X X X ○ ○ X X X ○ ○
49 Automation
Auto Door ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
50
51 Part Conveyor ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
52 Barfeeder Interface ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
53 Robot Interface ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
54 Tool & Work Counter (Internal / External) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
55 Tool Load Detect (L-HTLD) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
56 Arbitrary Speed Threading ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
57 Tool Life Management S S S S S S S S S S S S S
58 Automatic Tool Offset (Tool presetter option is required) S S S S S S S S S S S S S
59 Software Lathe Calculator Function (L-CAL) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
60 Work / Tool Management (L-COUNT) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
61 Workpiece Clamp of Chuck (L-WCMP) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
62 Real Time Operating Status Monitoring Solution (M-VISION Plus) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
63 M-Code & G-Code List Help ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
64 Linear Scale (X / Z) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
65 NC Cooler ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
66 Signal Lamp with 3 Color (R / G / Y) S S S S S S S S S S S S S
67 ETC Transformer ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
68 Manual Guide i S S S S S S S S S S S S S
69 10.4" Color LCD (FANUC) S S S S S S S S S S S S S
70 15" Color LCD (FANUC) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
HS-T153-R5.0-20191219
Hi-TECH 230B/C Hi-TECH 230BL/CL Hi-TECH 230BXL/CXL

1 8 inch Ⅹ Ⅹ Ⅹ Ⅹ Ⅹ Ⅹ Ⅹ Ⅹ Ⅹ Ⅹ Ⅹ Ⅹ Ⅹ
2 Main Chuck 10 inch S S S S S S S S S S S S S
3 No chuck ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
4 6 inch Ⅹ X X Ⅹ X X S S Ⅹ X X S S
Sub Chuck
5 No chuck X X X X X X ○ ○ X X X ○ ○
6 Soft Jaw S S S S S S S S S S S S S
Jaw
7 Hard Jaw ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
8 Chuck Pressure Check Switch ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
9 Dual Pressure (Chuck) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
10 Chucking Dual Pressure (C-axis brake) X ○ ○ X ○ ○ ○ ○ X ○ ○ ○ ○
11 Chuck Pressure Compensation ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
12 Chuck Clamp / Unclamp Switch ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
13 Standard (12 Station turret with Turning Tool only) S X X S X X X X S X X X X
14 BMT65 Turnmill (12 Station turret with Turnmill) X S S X S S S S X S S S S
15 24 Positions (12 Station turret with Turnmill) X S S X S S S S X S S S S
16 Axial Dirven Holder (BMT65) X S S X S S S S X S S S S
17 Radial Driven Holder (BMT65) X S S X S S S S X S S S S
18 U-Drill Holder Cap S S S S S S S S S S S S S
19 Double O.D Holder (for 24 Positions , 20X20) (Main / Sub) X ○ ○ X ○ ○ ○ ○ X ○ ○ ○ ○
20 Double O.D Holder (for 24 Positions , 25X25) (Main & Sub) X X X X X X S S X X X S S
21 Double I.D Holder (for 24 Positions, Ø 25) X ○ ○ X ○ ○ ○ ○ X ○ ○ ○ ○
Turret
22 Double I.D Holder (for 24 Positions, Ø 32) X X X X X X S S X X X S S
23 VDI 40 (12 Station turret with 12 positions and Turning Tool only) ○ X X ○ X X X X ○ X X X X
24 VDI 40 Turnmill (12 Station turret with 12 positions) X ○ ○ X ○ ○ ○ ○ X ○ ○ ○ ○
25 VDI 40 O.D Holder ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
26 VDI 40 I.D Holder ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
27 VDI 40 Face Holder ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
28 Axial Dirven Holder (for VDI 40 Turnmill) X ○ ○ X ○ ○ ○ ○ X ○ ○ ○ ○
29 Radial Driven Holder (for VDI 40 Turnmill) X ○ ○ X ○ ○ ○ ○ X ○ ○ ○ ○
30 U-Drill Holder (for VDI 40) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
HS-T153-R5.0-20191219

31 Digital Tailstock (use Hydraulic Cylinder) S S S S S S X X X X X X X
32 Tailstock Servo Tailstock (use Servo motor & Ball screw) ○ ○ ○ ○ ○ ○ X X ○ ○ ○ X X
33 Body & Quill Programmable Tailstock X X X X X X X X S S S X X
Rest Steady for Base

34 Steady Rest *Selecting both the Steady rest base and part catcher X X X X X X X X ○ ○ ○ X X
to be installed is not possible.
35 0.05 MPa S S S S S S S S S S S S S
Coolant Pump 0.6 / 1.5 / 3 / 7 MPa

36 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
37 Coolant Gun ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
38 Coolant Blow ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
39 Coolant
Coolant Level Sensor S S S S S S S S S S S S S
40 Options Coolant Chiller ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
41 Oil Skimmer ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
42 Large Capacity Coolant Tank ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
43 Air Blower ○ ○ ○ ○ ○ ○ S S ○ ○ ○ S S
Side / Back Type Chip Conveyor (Hinge / Scraper Type)

44 Chip Disposal *Back type can be used only in short type ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
45 Mist Collector (Interface) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
HS-T153-R5.0-20191219

46 Tool Presetter (Manual / Automation) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
47 Parts Catcher (Main) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Parts Catcher (Sub)
48 *Selecting both sub spindle part catcher and main spindle part X X X X X X X ○ X X X X X
catcher to be installed is not possible.
Workpiece Air Ejector & Through Coolant X X X X X X ○ ○ X X X ○ ○
49 Automation
Auto Door ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
50
51 Part Conveyor ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
52 Barfeeder Interface ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
53 Robot Interface ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
54 Tool & Work Counter (Internal / External) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
55 Tool Load Detect (L-HTLD) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
56 Arbitrary Speed Threading ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
57 Tool Life Management S S S S S S S S S S S S S
58 Automatic Tool Offset (Tool presetter option is required) S S S S S S S S S S S S S
59 Software Lathe Calculator Function (L-CAL) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
60 Work / Tool Management (L-COUNT) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
61 Workpiece Clamp of Chuck (L-WCMP) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
62 Real Time Operating Status Monitoring Solution (M-VISION Plus) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
63 M-Code & G-Code List Help ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
64 Linear Scale (X / Z) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
65 NC Cooler ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
66 Signal Lamp with 3 Color (R / G / Y) S S S S S S S S S S S S S
67 ETC Transformer ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
68 Manual Guide i S S S S S S S S S S S S S
69 10.4" Color LCD (FANUC) S S S S S S S S S S S S S
70 15" Color LCD (FANUC) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
HS-T153-R5.0-20191219
3. Detailed Information (3-3 Description of Standard / Optional Accessories)
• Automatic coolant System (STD)
External coolant tank
A coolant tank is placed at the front of the machine for easy
coolant exchange as well as easy tank cleaning and pump
maintenance. Particularly, it is possible to separate the tank
only without removing the chip conveyor for easy tank
cleaning.
Coolant Pump
Mesh Chip Filter
A 3-layered mesh Chip Filter, which is able to sort from long 1st Mesh Chip Filter
chips to micro chips, extends the service life of the coolant
pump.
Various Options
- Standard Coolant Pump : 0.05 MPa
- Optional Coolant Pump  0.6 / 1.5 / 3 / 7 MPa Coolant Level
Sensor
- Oil Skimmer (OPT)
- Lift-up Chip Conveyor : Hinge / Scraper Type (OPT) 3rd Mesh Chip Filter
2nd Mesh Chip Filter

Tank Capacity :
Short Type Long Type XL Type

Unit
STD / MC YMC STD / (S)MC Y(S)MC STD / (S)MC Y(S)MC
STD ℓ (gal) 115 (30.38) 125 (33.02) 125 (33.02) 140 (36.98) 150 (39.63) 165 (43.59)
Large (OPT) ℓ (gal) 200 (52.83) 210 (55.48) 210 (55.48) 225 (59.44) 235 (62.08) 250 (66.04)
Power : 0.4 kW (for Turret)
HS-T153-R5.0-20191219
• Parts Catcher – Main / Sub (OPT)
The bucket type is designed with connected linkage

applicable to a variety of part shapes.
The bucket catches and carries parts into the
collection box.
Max machinable workpiece size

230A, B, C : Ø 81 mm (Ø 3.19 inch) x 160 mm (6.3 inch)
* Selecting both sub spindle part catcher and main spindle part catcher to be installed is not possible.
* Sub Spindle Part catcher can be used only in LYSMC
* Selecting both the Steady rest base and part catcher to be installed is not possible.
• Tool Presetter (OPT)
Available function with automatic tool presetter

- With a simple touch on the sensor, it perfectly sets the
coordinate system (within 15 seconds per tool).
- The tool shape error value is automatically calculated
and entered.
- The automatic coordinate system is promptly configured
according to the material geometry.
HS-T153-R5.0-20191219
• Steady Rest (OPT)
- Can be used only in XL Type
Prepared accessory with Rest Base
- Hy’d Line with Valves for Open & Close of Rest Fingers
- Lubrication Line of Rest Finger Rollers
- Interlock Switch between Rest Base and Tailstock
- All necessary PLC ladder with M-code
* Except for SMC/YSMC type.
Method of Feed
- Programmable Type
※ Unit : mm
(KAHN)
Model ASR 1 ASR 2 ASR 3 ASR 3.1 ASR 3.2
Item STD / MC / YMC YMC
Min Clamp Dia Ø 4 Ø 8 Ø 12 Ø 20 Ø 50
Max Clamp Dia Ø 64 Ø 101 Ø 152 Ø 165 Ø 200
(SMW)
Model SLU 1 SLU 2 SLU 3 SLU 3.1 SLU 3.2
Item STD / MC / YMC YMC
Min Clamp Dia Ø 4 Ø 8 Ø 12 Ø 20 Ø 50
Max Clamp Dia Ø 64 Ø 101 Ø 152 Ø 165 Ø 200
HS-T153-R5.0-20191219
• Automatic Lubricant System (STD)
Using the system that automatically feeds precise volume of lubricant to each feed axis guide and
ball screw, the feed system maintains the precision and the life span of each component is extended.
If the lubricant supply line has a problem or the lubricant is short, a message is displayed on the
screen and the machine is automatically suspended for safe machine operation.
※ Unit : mm (inch)
Oil Type : ISO VG 68

Tank Capacity : 12 ℓ (3.17 gal)
Discharge : 150 cc/min
Discharge Pressure : 1.7 MPa
800 (31.5)
HS-T153-R5.0-20191219
• Hydraulic Unit (STD)
The cooling system is used as standard.
“Minimized Heat from Hydraulic Oil”
Units using the hydraulic device: The turret, the tailstock

and the chuck cylinder
• Oil Water Separator (STD)
A separate oil tank collects the lubricant remained after each

feed unit is lubricated to extend the coolant service life.
“Eco-friendly Oil Water Separation”
HS-T153-R5.0-20191219
• 90˚ Rotating Operator Panel (STD)
The Operator panel is newly designed from the operator's viewpoint and thus
enhances the operator's convenience.
“User Friendly Design”
• 10.4" display as standard (USB and PCMCIA cards as standard)

• Enhanced operability by optimizing the layout and improving the touch feeling of control buttons.
• Horizontal keys enhance user convenience.
• Long time continuous DNC operation with the CF card even without the data server.
• Equipment Optimization (STD)

• The cycle machining as well as the operating time and the acceleration / deceleration speed of feed
system are optimized.
• Dramatically reduced non-cutting time during machining ensures optimal productivity.
• High precision, speed and smoothness are realized using the cutting-edge machining technology.
• Machining surface quality enhanced by HRV3+ control
(HRV3+: effectively prevents machine oscillation by controlling the servo current to enhance the
machining surface quality.)
“Enhanced Productivity'”
HS-T153-R5.0-20191219
• Manual Guide i (STD)
With the Manual Guide i, the operator is able to create a machining program for the desired geometry including the
pattern simply if he/she enters numeric values for the basic machining geometry.
Programming in convenient functions and rich machining cycles The realistic machining simulation checks the program.
Tool offsets and the work coordinate system are set It displays the machine status and the tools
during the measuring cycle. in use while machining.
HS-T153-R5.0-20191219
• M-CODE / G-CODE LIST (OPT)
It lists M-codes and G-codes used in the machine on the screen for easy and quick search and use.
(However, it is necessary to discuss in advance to add and / or change the user required function codes (M-code))
HS-T153-R5.0-20191219
3. Detailed Information (3-4 Hwacheon Software)
Lathe Hwacheon Tool Load Detect System (OPT)
It monitors the load factors of spindles and each axis during lathe (turnmill) machining and provides the following
benefits to customers Turnmill
Feed axis Main / Sub Spindle
1. Tool life management (STD)

- Generates an alarm for excessive insert
wear (overload)
2. Optimized process
- Able to control individual machining
X-LIMIT 1
conditions per insert wear
3. Able to quickly respond to

wear and tear of tools
- Generates a replacement alarm
in the event of an insert damage
HS-T153-R5.0-20191219
Lathe Calculator Function (OPT)
You can enter values required for machining directly from the display operator panel for an easy calculation
without a calculator.
• The number of optimal main

spindle speed
• The cutting speed
• Material removal rate (MRR)
• The cutting time
HS-T153-R5.0-20191219
Work / Tool Counter Management (OPT)
You can monitor the daily / total production quantity and tool usages.
Tool Count Management : 8 tools

The number of
machining parts - Display the current tool counter
(NOW)
- Inform tool replacement in
The number of advance via message (ADV)
required parts
(entered by the user) - Notify tool replacement via alarm
(SET)
- The rate (RATE) of the current
Total number of
machining parts usage value (NOW) to the tool
replacement target value (SET)
Reset the number of Reset the total number Reset the current tool
machining parts of machining parts counter (NOW)
HS-T153-R5.0-20191219
Workpiece Clamp of Chuck (OPT)
To complement the drawback of the proximity switch of which the position should be adjusted according
to the material diameter, the analog sensor (0-10V) is used to set the distances of the open and close
zones from the operating screen for enhanced user convenience.
(However, it is necessary to discuss with factory in advance whether it is possible to mount the analog sensor.)
• View the chuck open / close state

• Change the driving condition according to the chuck type
(inner and outer diameters)
• Set the chuck open / close zone
• An alarm is generated if the chuck function fails.
HS-T153-R5.0-20191219
M-VISION Plus (OPT)
(Monitoring solution of real-time operational status)
• It is the system that monitors the machine state in real

time by connecting equipment in the customer's
factory to a network.
• With a smart phone, it is possible to check the machine
operating state and alarms at any time anywhere.
• Fanuc FOCAS2 / Ethernet function is required
• Static IP or DDNS is required for mobile app
 Monthly operating history view
 Real-time equipment operation status monitoring  Availability statistics

HS-T153-R5.0-20191219
3. Detailed Information (3-5 Diagram)
• Spindle Power-Torque Diagram
Max Power : 18.5 kW (25 HP) Max Power : 22 kW (29 HP)
4,500 rpm (Hi-TECH 230A) Max Torque : 330 Nm 3,500 rpm (Hi-TECH 230C) Max Torque : 703.5 Nm
High Speed (0~3500 rpm)
Low Speed (0~1119 rpm)

Electric Conversion
(429 rpm)
Max Power : 18.5 kW (25 HP)

3,500 rpm (Hi-TECH 230B) Max Torque : 410 Nm
HS-T153-R5.0-20191219
• Spindle Power-Torque Diagram
Max Power : 7.5 kW (10 HP) Max Power : 11 kW (15 HP)
5,000 rpm (Sub Spindle) Max Torque : 86 Nm 5,000 rpm (Sub Spindle) (OPT) Max Torque : 126 Nm
Max Power : 5.5 kW (7.4 HP)

5,000 rpm (Turnmill) Max Torque : 52.5 Nm
HS-T153-R5.0-20191219
• Spindle Power-Torque Diagram – (SIEMENS, OPT)
Max Power : 25.5 kW (33.6 HP) Max Power : 25.5 kW (33.6 HP)
4,500 rpm (Hi-TECH 230A) Max Torque : 340.7 Nm 3,500 rpm (Hi-TECH 230B) Max Torque : 423.5 Nm
Max Power : 10.5 kW (13.8HP) Max Power : 5.6 kW (7.5HP)

5,000 rpm (Sub Spindle) Max Torque : 90.2 Nm 5,000 rpm (Turnmill) Max Torque : 53.4 Nm
HS-T153-R5.0-20191219
3. Detailed Information (3-5 Diagram) ※ Unit : mm (inch)
S : Short Type
• Machine Size L : Long Type
XL : Extra Long Type
Y : Y-axis
428 (16.85)
Added Cover : SMC type only (YMC & YSMC)
900 (35.43)
Added Cover : SMC type only
Height - 1,800 (70.87) [Y : 2,104 (82.83)]

1,165 (45.87)
Height – SMC : 1,934.5 (76.16)

(Spindle Center)
[Y : 1,652 (65.04)]
1,490 (58.66)
[Y : 1,155 (45.47)]
1,025 (40.35)
1,200 (47.24)
455.5 (17.93) 230A/B : 198 (7.8)
[Y : 442.5 (17.42)] 70 (2.76) 230C : 298 (11.73) S : 2,695 (106.1) / L : 2,935 (115.55) / XL : 3,555 (139.96)
Width - 1,849.5 (72.81) Handle

~ Door Length – 230A/B - S : 2,893 (113.9) / L : 3,133 (123.35) / XL : 3,753 (147.76)
Wid [Y : 1,924.5 (75.77)]
230C - S : 2,993 (117.83) / L : 3,233 (127.28) / XL : 3,853 (151.69)
【Side】【Front】
HS-T153-R5.0-20191219
3. Detailed Information (3-5 Diagram) ※ Unit : mm (inch)
S : Short Type
• Machine Size – Large Capacity Coolant Tank L : Long Type
Y : Y-axis
428 (16.85)
Added Cover : SMC type only (YMC & YSMC)
900 (35.43)
Added Cover : SMC type only
1,165 (45.87)
Height - 1,800 (70.87) [Y : 2,104 (82.83)]

Height – SMC : 1,934.5 (76.16)
400 (15.75)
(Spindle Center)
[Y : 1,652 (65.04)]
1,490 (58.66)
[Y : 1,155 (45.47)]
1,025 (40.35)
1,200 (47.24)
455.5 (17.93) 230A/B : 198 (7.8)
[Y : 442.5 (17.42)] 70 (2.76) 230C : 298 (11.73) S : 3,095 (121.85) / L : 3,335 (131.3) / XL : 3,955 (155.71)
Width - 1,849.5 (72.81) Handle

~ Door Length – 230A/B - S : 3,293 (129.65) / L : 3,533 (139.09) / XL : 4,153 (163.5)
Wid [Y : 1,924.5 (75.77)]
230C - S : 3,393 (133.58) / L : 3,633 (143.03) / XL : 4,253 (167.44)
HS-T153-R5.0-20191219
• Machine Size (SIEMENS, OPT) L : Long Type
• Hi-TECH 230 AL/AXL/BL/BXL Y(S)MC
1,165 (45.87)
Height : 2,104 (82.83)

(Spindle Center)
1,652 (65.04)
1,155 (45.47)
1,200 (47.24)
430 (16.93) 442.5 (17.42) 70 (2.76) 200 (7.87) L : 2,935 (115.55) / XL : 3,555 (139.96)
Handle
Width : 1,926.5 (75.84) ~ Door Length – L : 3,229 (127.13) / XL : 3,849 (151.54)
HS-T153-R5.0-20191219
• Machine Size (SIEMENS & Large Capacity Coolant Tank, OPT) L : Long Type
• Hi-TECH 230 AL/AXL/BL/BXL Y(S)MC
1,165 (45.87)
Height : 2,104 (82.83)

400 (15.75)
(Spindle Center)
1,652 (65.04)
1,155 (45.47)
1,200 (47.24)
430 (16.93) 442.5 (17.42) 70 (2.76) L : 3,335 (131.3) / XL : 3,955 (155.71)
200 (7.87)
Handle
Width : 1,926.5 (75.84) ~ Door Length – L : 3,629 (143.03) / XL : 4,249 (167.28)
HS-T153-R5.0-20191219
• Foundation Drawing – Short Bed ※ Unit : mm (inch)
Y : Y-axis
Dimension (L x W) [mm (inch)]
• 230A/B
- 2,893 (113.9) x 1,849.5 (72.81)
230C
- 2,993 (117.83) x 1,849.5 (72.81)
• 230A/B (Y-axis)
- 2,893 (113.9) x 1,924.5 (75.77)
230C (Y-axis)
- 2,993 (117.83) x 1,924.5 (75.77)
Weight (kgf )
• 230A/B
STD / MC : 5,800
YMC : 5,950
• 230C
STD / MC : 5,900
YMC : 6,050
Electric Power (kVA)

• STD / MC : 35
• YMC : 40
Transformer Capacity (kVA)

• STD / MC : 35
• YMC : 40
Size of Power Cable : 25 SQ
Front
HS-T153-R5.0-20191219
• Foundation Drawing – Short Bed , Large Capacity Coolant Tank (OPT) ※ Unit : mm (inch)
Y : Y-axis
• 230A/B
- 3,293 (129.65) x 1,849.5 (72.81)
230C
- 3,393 (133.58) x 1,849.5 (72.81)
• 230A/B (Y-axis)
- 3,293 (129.65) x 1,924.5 (75.77)
230C (Y-axis)
- 3,393 (133.58) x 1,924.5 (75.77)
Weight (kgf )
• 230A/B
STD / MC : 5,850
YMC : 6,000
• 230C
STD / MC : 5,950
YMC : 6,100

• STD / MC : 35
• YMC : 40

• STD / MC : 35
• YMC : 40
Front
HS-T153-R5.0-20191219
• Foundation Drawing – Long Bed
• 230AL/BL :
- 3,133 (123.35) x 1,849.5 (72.81) Y : Y-axis
230CL
- 3,233 (127.28) x 1,849.5 (72.81)
• 230AL/BL (Y-axis) :
- 3,133 (123.35) x 1,924.5 (75.77)
230CL (Y-axis) :
- 3,233 (127.28) x 1,924.5 (75.77)
Weight (kgf )
• 230AL/BL
STD / MC : 6,500
SMC / YMC : 6,650
YSMC : 6,800
• 230CL
STD / MC : 6,600
SMC / YMC : 6,750
YSMC : 6,900

• STD / MC : 35
• YMC : 40
• (230AL/BL) SMC / YSMC : 40
• (230CL) SMC : 45
• (230CL) YSMC : 50

• STD / MC : 35
• YMC : 40
• (230AL/BL) SMC / YSMC : 40
• (230CL) SMC : 45 Front
• (230CL) YSMC : 50

HS-T153-R5.0-20191219
• Foundation Drawing – Long Bed, Large Capacity Coolant Tank (OPT)
• 230AL/BL :
- 3,533 (139.09) x 1,849.5 (72.81) Y : Y-axis
230CL :
- 3,633 (146.03) x 1,849.5 (72.81)
• 230AL/BL (Y-axis) :
- 3,533 (139.09) x 1,924.5 (75.77)
230CL (Y-axis) :
- 3,633 (146.03) x 1,924.5 (75.77)
Weight (kgf )
• 230AL/BL
STD / MC : 6,550
SMC / YMC : 6,700
YSMC : 6,850
• 230CL
STD / MC : 6,650
SMC / YMC : 6,800
YSMC : 6,950

• STD / MC : 35
• YMC : 40
• (230AL/BL) SMC / YSMC : 40
• (230CL) SMC : 45
• (230CL) YSMC : 50

• STD / MC : 35
• YMC : 40
• (230AL/BL) SMC / YSMC : 40
• (230CL) SMC : 45 Front
• (230CL) YSMC : 50

HS-T153-R5.0-20191219
• Foundation Drawing – Extra Long Bed
• 230AXL/BXL :
- 3,753 (147.76) x 1,849.5 (72.81) Y : Y-axis
230CXL :
- 3,853 (151.69) x 1,849.5 (72.81)
• 230AXL/BXL (Y-axis) :
- 3,753 (147.76) x 1,924.5 (75.77)
230CXL (Y-axis) :
- 3,853 (151.69) x 1,924.5 (75.77)
Weight (kgf )
• 230AXL/BXL
STD / MC : 8,050
SMC / YMC : 8,200
YSMC : 8,350
• 230CXL
STD / MC : 8,150
SMC / YMC : 8,300
YSMC : 8,450

• STD / MC : 35
• YMC : 40
• (230AXL/BXL) SMC / YSMC : 40
• (230CXL) SMC : 45
• (230CXL) YSMC : 50

• STD / MC : 35
• YMC : 40
• (230CXL) SMC : 45 Front
• (230CXL) YSMC : 50

HS-T153-R5.0-20191219
• Foundation Drawing – Extra Long Bed, Large Capacity Coolant Tank (OPT)
• 230AXL/BXL :
- 4,153 (163.5) x 1,849.5 (72.81) Y : Y-axis
230CXL :
- 4,253 (167.44) x 1,849.5 (72.81)
• 230AXL/BXL (Y-axis) :
- 4,153 (163.5) x 1,924.5 (75.77)
230CXL (Y-axis) :
- 4,253 (167.44) x 1,924.5 (75.77)
Weight (kgf )
• 230AXL/BXL
STD / MC : 8,150
SMC / YMC : 8,300
YSMC : 8,450
• 230CXL
STD / MC : 8,250
SMC / YMC : 8,400
YSMC : 8,550

• STD / MC : 35
• YMC : 40
• (230CXL) SMC : 45
• (230CXL) YSMC : 50

• STD / MC : 35
• YMC : 40
• (230CXL) SMC : 45 Front
• (230CXL) YSMC : 50

HS-T153-R5.0-20191219
• Foundation Drawing – Long Bed (SIEMENS, OPT) ※ Unit : mm (inch)
Machine
• Hi-TECH 230 AL/BL Y(S)MC

• 3,229 (127.13) x 1,926.5 (75.84)
Weight (kgf)
• YMC : 6,800
• YSMC : 6,950

• YMC : 40
• YSMC : 45
Front
HS-T153-R5.0-20191219
• Foundation Drawing ※ Unit : mm (inch)
– Long Bed (SIEMENS, Large Capacity Coolant Tank OPT)
Machine
• Hi-TECH 230 AL/BL Y(S)MC

• 3,629 (146.87) x 1,926.5 (75.84)
Weight (kgf)
• YMC : 6,850
• YSMC : 7,000

• YMC : 40
• YSMC : 45
Front
HS-T153-R5.0-20191219
• Foundation Drawing – Extra Long Bed (SIEMENS, OPT) ※ Unit : mm (inch)
Machine
• Hi-TECH 230 AXL/BXL Y(S)MC

• 3,849 (151.54) x 1,985 (78.15)
Weight (kgf)
• YMC : 8,400
• YSMC : 8,550

• YMC : 40
• YSMC : 45
Front
HS-T153-R5.0-20191219
• Foundation Drawing ※ Unit : mm (inch)
– Extra Long Bed (SIEMENS, Large Capacity Coolant Tank OPT)

Machine
• Hi-TECH 230 AXL/BXL Y(S)MC

• 4,249 (167.28) x 1,985 (78.15)
Weight (kgf)
• YMC : 8,450
• YSMC : 8,600

• YMC : 40
• YSMC : 45
Front
HS-T153-R5.0-20191219
• Tooling Diagram (Hi-TECH 230A,B STD)
Part No. Q’ty
Tool Part name Shape
mm(inch) ea
104029A
Block 6 Sets
104030A
□ 25 mm
20A43001
(□ 1 inch) Face Holder 1
(20A430011)
20A43002
I.D Holder 4
(20A430021)
214305 (214330) Sleeve (Ø12, 1/2”) 1
214306 (214331) Sleeve (Ø16, 5/8”) 1

Ø 40 mm
(Ø 1.5 inch) 214307 (214332) Sleeve (Ø20, 3/4”) 1
214308 (214333) Sleeve (Ø25, 1”) 1
214309 (214334) Sleeve (Ø32, 1 1/4”) 1
20A43003
U-Drill Holder 1
(20A430031)
214313 (214338) U-Drill Sleeve (Ø20, 3/4”) OPT
214314 (214339) U-Drill Sleeve (Ø25, 1”) OPT
214315 (214340) U-Drill Sleeve (Ø32, 1 1/4”) OPT
214310 (214335) Socket (MT#1) 1
214311 (214336) Socket (MT#2) 1
214312 (214337) Socket (MT#3) 1

HS-T153-R5.0-20191219
• Tooling Diagram (Hi-TECH 230C STD)
Part No. Q’ty
mm(inch) ea
104029A
Block 5 Sets
104030A
20A43004
□ 25 mm Extended O.D Cutting Holder 1
(20A430041)
(□ 1 inch)
20A43001
Face Holder 1
(20A430011)
20A43002
I.D Holder 4
(20A430021)
214305 (214330) Sleeve (Ø12, 1/2”) 1
214306 (214331) Sleeve (Ø16, 5/8”) 1

Ø 40 mm
(Ø 1.5 inch) 214307 (214332) Sleeve (Ø20, 3/4”) 1
214308 (214333) Sleeve (Ø25, 1”) 1
214309 (214334) Sleeve (Ø32, 1 1/4”) 1
20A43003
U-Drill Holder 1
(20A430031)
214310 (214335) Socket (MT#1) 1
214311 (214336) Socket (MT#2) 1
214312 (214337) Socket (MT#3) 1

HS-T153-R5.0-20191219
• Tooling Diagram (Hi-TECH 230A,B (Y)MC)
Part No. Q’ty
mm(inch) ea
20A44003
O.D Cutting Holder 4
(20A440031)
[BMT65]
□ 25 mm 20A44004
Face Holder 1
(□ 1 inch) (20A440041)
20A4411
□ 20 mm Double O.D Cutting Holder OPT
(20A4401)
(□ 0.75 inch)
20A44121
Double I.D Holder OPT
(20A44021)
20A4341(20A43411) Sleeve (Ø 6, 1/4") OPT
20A4342(20A43421) Sleeve (Ø 8, 5/16") OPT
20A4343(20A43431) Sleeve (Ø 10, 3/8") OPT

Ø 25 mm
(Ø 1 inch) 20A4344(20A43441) Sleeve (Ø 12, 1/2") OPT
20A4345(20A43451) Sleeve (Ø 16, 5/8") OPT

Axial Turnmill Holder (OPT)
20A4346(20A43461) Sleeve (Ø 20, 3/4") OPT (20A4321)
20A44005
I.D Holder 2
(20A440051)
214305 (214330) Sleeve (Ø12, 1/2”) 1
214306 (214331) Sleeve (Ø16, 5/8”) 1

Ø 40 mm
(Ø 1.5 inch) 214307 (214332) Sleeve (Ø20, 3/4”) 1 Radial Turnmill Holder (OPT)
214308 (214333) Sleeve (Ø25, 1”) 1 (20A4320)
214309 (214334) Sleeve (Ø32, 1 1/4”) 1
HS-T153-R5.0-20191219
• Tooling Diagram (Hi-TECH 230A,B (Y)MC)
Part No. Q’ty
mm(inch) ea
214310 (214335) Socket (MT#1) 1
214311 (214336) Socket (MT#2) 1

[BMT65]
214312 (214337) Socket (MT#3) 1
20A44006
U-Drill Holder 1
(20A440061)
ER32 Ø 3,4,5,6,7,8,9,10,11,12, 13
Ø 14, 15, 16, 17, 18, 19, 20
2193031
ER32I Ø1/8”, Ø3/16”, Ø1/4”, 1 Set
(SC42651)
Ø5/16”, Ø3/8”, Ø7/16”,
Ø1/2’, Ø11/16” Axial Turnmill Holder (OPT)
(20A4321)
21L4466 Cap 12
Radial Turnmill Holder (OPT)

(20A4320)
HS-T153-R5.0-20191219
• Tooling Diagram (Hi-TECH 230C (Y)MC)
Part No. Q’ty
mm(inch) ea
20A44003
(20A440031)
O.D Cutting Holder 4 [BMT65]
20A44004
Face Holder 1
(20A440041)
□ 25 mm
(□ 1 inch)
20A44007
Extended O.D Cutting Holder 1
(20A440071)
20A4411
□ 20 mm (20A4401)
Double O.D Cutting Holder OPT
(□ 0.75 inch)
20A44121
(20A44021)
20A4341(20A43411) Sleeve (Ø 6, 1/4") OPT

20A4342(20A43421) Sleeve (Ø 8, 5/16") OPT
20A4343(20A43431) Sleeve (Ø 10, 3/8") OPT
Ø 25 mm Axial Turnmill Holder (OPT)
(20A4321)
20A4345(20A43451) Sleeve (Ø 16, 5/8") OPT
20A4346(20A43461) Sleeve (Ø 20, 3/4") OPT
20A44005
I.D Holder 2
(20A440051)
214305 (214330) Sleeve (Ø12, 1/2”) 1

214306 (214331) Sleeve (Ø16, 5/8”) 1
Ø 40 mm (20A4320)
(Ø 1.5 inch) 214307 (214332) Sleeve (Ø20, 3/4”) 1
214308 (214333) Sleeve (Ø25, 1”) 1
214309 (214334) Sleeve (Ø32, 1 1/4”) 1
HS-T153-R5.0-20191219
• Tooling Diagram (Hi-TECH 230C (Y)MC)
Part No. Q’ty
mm(inch) ea
214310 (214335) Socket (MT#1) 1
[BMT65]
214311 (214336) Socket (MT#2) 1
214312 (214337) Socket (MT#3) 1
20A44006
U-Drill Holder 1
(20A440061)
ER32 Ø 3,4,5,6,7,8,9,10,11,12, 13
Ø 14, 15, 16, 17, 18, 19, 20
2193031 (20A4321)
ER32I Ø1/8”, Ø3/16”, Ø1/4”, 1 Set
(SC42651) Ø5/16”, Ø3/8”, Ø7/16”,
Ø1/2’, Ø11/16”
21L4466 Cap 12

(20A4320)
HS-T153-R5.0-20191219
• Tooling Diagram (Hi-TECH 230A/B/C SMC) ※Unit : mm (inch)
Tool
Part No.
Part name
Q’ty
Shape
[BMT65]
mm(inch) ea
20A44003
(20A440031)
20A44016A
Sub O.D Cutting Holder 1
(20A440161A)
□ 25 mm 20A44004
Face Holder 1
(□ 1 inch) (20A440041)
20A44017
Double O.D Cutting Holder 1
(20A440171)
Main:20A4411 (20A4401) OPT

Double O.D Cutting Holder
□ 20 mm Sub:20A44111 (20A44012) (Main / Sub)
(□ 0.75 inch)
20A44121 Axial Turnmill Holder (OPT)
(20A44021) (20A4321)
20A4341(20A43411) Sleeve (Ø 6, 1/4") OPT
20A4342(20A43421) Sleeve (Ø 8, 5/16") OPT
20A4343(20A43431) Sleeve (Ø 10, 3/8") OPT
Ø 25 mm
20A4345(20A43451) Sleeve (Ø 16, 5/8") OPT
20A4346(20A43461) Sleeve (Ø 20, 3/4") OPT Radial Turnmill Holder (OPT)
20A44018
Double I.D Holder 1
(20A4320) (20A4323)
(20A440181)
(Offset)
20A4351(20A43511) Sleeve (Ø 6, 1/4") OPT
20A4352(20A43521) Sleeve (Ø 8, 5/16") OPT
20A4353(20A43531) Sleeve (Ø 10, 3/8") OPT
95 (3.74)
72 (2.83)
Ø 32 mm 20A4354(20A43541) Sleeve (Ø 12, 1/2") OPT
(Ø 1.3 inch)
20A4355(20A43551) Sleeve (Ø 16, 5/8") OPT
20A4356(20A43561) Sleeve (Ø 20, 3/4") OPT
20A4357(20A43571) Sleeve (Ø 25, 1") OPT
HS-T153-R5.0-20191219
• Tooling Diagram (Hi-TECH 230A/B/C SMC) ※Unit : mm (inch)
Tool
Part No.
Part name
Q’ty
Shape [BMT65]
mm(inch) ea
20A44014
I.D Holder 1
(20A440141)
214305 (214330) Sleeve (Ø12, 1/2”) 1
214306 (214331) Sleeve (Ø16, 5/8”) 1
Ø 40 mm 214307 (214332) Sleeve (Ø20, 3/4”) 1
(Ø 1.5 inch)
214308 (214333) Sleeve (Ø25, 1”) 1
214309 (214334) Sleeve (Ø32, 1 1/4”) 1
214310 (214335) Socket (MT#1) 1
214311 (214336) Socket (MT#2) 1
214312 (214337) Socket (MT#3) 1
U-Drill Holder 1
(20A440151)
(20A4321)
ER32 Ø 3,4,5,6,7,8,9,10,11,12, 13
Ø 14, 15, 16, 17, 18, 19, 20
2193031
ER32I Ø1/8”, Ø3/16”, Ø1/4”, 1 Set
(SC42651)
Ø5/16”, Ø3/8”, Ø7/16”,
Ø1/2’, Ø11/16”
(20A4320) (20A4323)
21L4466 Cap 12
(Offset)
95 (3.74)
72 (2.83)
HS-T153-R5.0-20191219
• Tooling Diagram (Hi-TECH 230A/B/C YSMC) ※Unit : mm (inch)
Tool
Part No.
Part name
Q’ty
Shape
[BMT65]
mm(inch) ea
20A44003
(20A440031)
20A44016A
Sub O.D Cutting Holder 1
(20A440161A)
20A44004
□ 25 mm Face Holder 1
(20A440041)
(□ 1 inch)
20A44017
Double O.D Cutting Holder 1
(20A440171)
Main:20A4411 (20A4401) OPT

Double O.D Cutting Holder
□ 20 mm Sub:20A44111 (20A44012) (Main / Sub)
(□ 0.75 inch)
(20A44123) (20A4321)
20A4341(20A43411) Sleeve (Ø 6, 1/4") OPT
20A4342(20A43421) Sleeve (Ø 8, 5/16") OPT

20A4345(20A43451) Sleeve (Ø 16, 5/8") OPT
20A4346(20A43461) Sleeve (Ø 20, 3/4") OPT Radial Turnmill Holder (OPT)
20A44018 (20A4320) (20A4322) (20A4323)
Double I.D Holder 1
(20A440181) (Offset)
20A4351(20A43511) Sleeve (Ø 6, 1/4") OPT
20A4352(20A43521) Sleeve (Ø 8, 5/16") OPT
72 (2.83)
95 (3.74)
OPT
95 (3.74)
20A4353(20A43531) Sleeve (Ø 10, 3/8")
(Ø 1.3 inch)
20A4355(20A43551) Sleeve (Ø 16, 5/8") OPT
20A4356(20A43561) Sleeve (Ø 20, 3/4") OPT
20A4357(20A43571) Sleeve (Ø 25, 1") OPT
HS-T153-R5.0-20191219
• Tooling Diagram (Hi-TECH 230A/B/C YSMC) ※Unit : mm (inch)
Tool
Part No.
Part name
Q’ty
Shape
[BMT65]
mm(inch) ea
20A44020
I.D Holder 1
(20A440201)
214305 (214330) Sleeve (Ø12, 1/2”) 1
214306 (214331) Sleeve (Ø16, 5/8”) 1
Ø 40 mm 214307 (214332) Sleeve (Ø20, 3/4”) 1
(Ø 1.5 inch)
214308 (214333) Sleeve (Ø25, 1”) 1
214309 (214334) Sleeve (Ø32, 1 1/4”) 1
214310 (214335) Socket (MT#1) 1
214311 (214336) Socket (MT#2) 1
214312 (214337) Socket (MT#3) 1
20A44022
U-Drill Holder 1
(20A440221) (20A4321)
ER32 Ø 3,4,5,6,7,8,9,10,11,12, 13
Ø 14, 15, 16, 17, 18, 19, 20
2193031
ER32I Ø1/8”, Ø3/16”, Ø1/4”, 1 Set
(SC42651)
Ø5/16”, Ø3/8”, Ø7/16”,
Ø1/2’, Ø11/16”
(20A4320) (20A4322) (20A4323)
21L4466 Cap 12
(Offset)
72 (2.83)
95 (3.74)
95 (3.74)
HS-T153-R5.0-20191219
• Turret Interference Diagram
Hi-TECH 230A / B / C STD Hi-TECH 230A / B / C (Y)MC
HS-T153-R5.0-20191219
Hi-TECH 230A / B / C SMC Hi-TECH 230A / B / C YSMC
HS-T153-R5.0-20191219
Hi-TECH 230 Y-axis Moving Range Hi-TECH 230 Y-axis Moving Range (Sub Spindle)
HS-T153-R5.0-20191219
• Turret Interference Diagram – VDI40 (OPT) ※ Unit : mm (inch)
Hi-TECH 230A/B/C (L) (Y)MC (Side Type)
HS-T153-R5.0-20191219
• Moving Range (Hi-TECH 230A/B/C (L) STD) ※ Unit : mm (inch)
Max Cutting Length A Type : 403 (45.87) [L : 643 (25.31)] A Type : 405 (15.94) [L : 645 (25.39)]
O.D B/C Type : 379 (14.92) [L : 619 (24.37)] I.D B/C Type : 381 (15) [L : 621 (24.45)]
HS-T153-R5.0-20191219
• Moving Range (Hi-TECH 230A/B/C (L) MC) ※ Unit : mm (inch)
O.D B/C Type : 320 (12.6) [L : 560 (22.05)] I.D B/C Type : 366 (14.41) [L : 606 (23.86)]
A Type : 450 (17.72) [L : 690 (27.17)] A Type : 351 (13.82) [L : 591 (23.27)]
Axial B/C Type : 426 (16.77) [L : 666 (26.22)] Radial B/C Type : 327 (12.87) [L : 567 (22.32)]
HS-T153-R5.0-20191219
• Moving Range (Hi-TECH 230A/B/C (L) YMC) ※ Unit : mm (inch)
O.D B/C Type : 320 (12.6) [L : 560 (22.05)] I.D B/C Type : 366 (14.41) [L : 606(23.86)]
A Type : 450 (17.72) [L : 690 (27.17)] A Type : 351 (13.82) [L : 591 (23.27)]
Axial B/C Type : 426 (16.77) [L : 666 (26.22)] Radial B/C Type : 327 (12.87) [L : 567 (22.32)]
HS-T153-R5.0-20191219
• Moving Range (Hi-TECH 230AL / BL / CL SMC) ※ Unit : mm (inch)
Max Cutting Length A-Type : 584 (22.99) A-Type : 630 (24.8)
O.D B/C Type : 560 (22.05) I.D B/C-Type : 606 (23.86)
A-Type 690 (27.17) A-Type 591 (23.27)

Axial B/C-Type 666 (26.22) Radial B/C-Type 567 (22.32)
HS-T153-R5.0-20191219
O.D (Sub)
Max Cutting Length : A-Type 591 (23.27)
B/C Type 566 (22.28) I.D (Sub)
Axial (Sub) Radial (Sub) - Offset
HS-T153-R5.0-20191219
I.D (Double) I.D (Double / Sub)
HS-T153-R5.0-20191219
• Moving Range (Hi-TECH 230AL / BL / CL YSMC) ※ Unit : mm (inch)
Max Cutting Length : A-Type 584 (22.99) A-Type 630 (24.8)
O.D B/C Type 560 (22.05) I.D B/C-Type 606 (23.86)
A-Type 690 (27.17) A-Type 591 (23.27)

Axial B/C-Type 666 (26.22) Radial B/C-Type 567 (22.32)
HS-T153-R5.0-20191219
Max Cutting Length : A-Type 591 (23.27)
O.D (Sub) B/C Type 566 (22.28) I.D (Sub)
Axial (Sub) Radial (Sub)
HS-T153-R5.0-20191219
I.D (Double) I.D (Double / Sub)
HS-T153-R5.0-20191219
• Moving Range (Hi-TECH 230AXL / BXL / CXL YMC) ※ Unit : mm (inch)
Max Cutting Length : A-Type 1,084 (42.68) A-Type 1,130 (44.49)
O.D B/C Type 1,060 (41.73) I.D B/C-Type 1,106 (43.54)
A-Type 1,190 (46.85) A-Type 1,091 (42.95)

Axial B/C-Type 1,166 (45.91) Radial B/C-Type 1,067 (42.01)
HS-T153-R5.0-20191219
• Moving Range (Hi-TECH 230AXL / BXL / CXL STD) ※ Unit : mm (inch)
Max Cutting Length : A-Type 1,143 (45) A-Type 1,145 (45.08)
O.D B/C Type 1,119 (44.06) I.D B/C-Type 1,121 (44.13)
HS-T153-R5.0-20191219
• Steady Rest Moving Range (Hi-TECH 230AXL / BXL / CXL) ※ Unit : mm (inch)
HS-T153-R5.0-20191219
• Turret Interference Diagram – VDI40 (OPT) ※ Unit : mm (inch)
Hi-TECH 230A/B/C (L) (Y)MC (Side Type)
HS-T153-R5.0-20191219
• Moving Range (Hi-TECH 230A/B/C (L) (Y)MC – VDI40 Side Type, OPT) ※ Unit : mm (inch)
Max Cutting Length A Type : 397 (15.63) [L : 637 (25.08)] Max Cutting Length A Type : 357 (14.06) [L : 597 (23.5)]
O.D B/C Type : 373 (14.69) [L : 613 (24.13)] O.D B/C Type : 333 (13.11) [L : 573 (22.56)]
• Reference for OD Holder : DIN 69880 Form C1 • Reference for OD Holder : EWS Korea Special Type
HS-T153-R5.0-20191219
• Moving Range (Hi-TECH 230A/B/C (L) (Y)MC – VDI40 Side Type, OPT) ※ Unit : mm (inch)
A-Type 411 (16.18) [L : 651 (25.63)]
I.D B/C-Type 387 (15.24) [L : 627 (24.69)]
• Reference for ID Holder : EWS Korea Special Type
• Reference for Axial T.M Holder : EWS Korea Special Type
• Reference for Radial T.M Holder : EWS Korea Special Type
Axial Radial
HS-T153-R5.0-20191219
3. Detailed Information (3-6 Machine / NC Specifications)
• Machine Specifications (Hi-TECH 230A)
Item
STD/MC YMC STD/MC YMC SMC/YSMC STD/MC YMC SMC/YSMC
Capacity
SMC:Ø 690 (Ø 27.17) SMC:Ø 690 (Ø 27.17)
Swing over Bed mm (inch) Ø 690 (Ø 27.17) Ø 750 (Ø 29.53) Ø 690 (Ø 27.17) Ø 750 (Ø 29.53) Ø 690 (Ø 27.17) Ø 750 (Ø 29.53)
/YSMC:Ø 750 (Ø 29.53) /YSMC:Ø 750 (Ø 29.53)
SMC:Ø 529 (Ø 20.83) SMC:Ø 529 (Ø 20.83)

Swing over Saddle mm (inch) Ø 529 (Ø 20.83) Ø 540 (Ø 21.26) Ø 529 (Ø 20.83) Ø 540 (Ø 21.26) Ø 529 (Ø 20.83) Ø 540 (Ø 21.26)
/YSMC:Ø 540 (Ø 21.26) /YSMC:Ø 540 (Ø 21.26)
STD:Ø 425 (Ø 16.73) STD:Ø 425 (Ø 16.73) STD:Ø 425 (Ø 16.73)

Max Cutting Dia mm (inch) Ø 400 (Ø 15.75) Ø 400 (Ø 15.75) Ø 400 (Ø 15.75)
/MC:Ø 400 (Ø 15.75) /MC:Ø 400 (Ø 15.75) /MC:Ø 400 (Ø 15.75)
STD:Ø 213.6 (Ø 8.41) STD:Ø 213.6 (Ø 8.41) STD:Ø 213.6 (Ø 8.41)

Standard Cutting Dia mm (inch) Ø 221 (Ø 8.7) Ø 221 (Ø 8.7) Ø 277 (Ø 10.91) Ø 221 (Ø 8.70) Ø 277 (Ø 10.91)
/MC:Ø 221 (Ø 8.70) /MC:Ø 221 (Ø 8.7) /MC:Ø 221 (Ø 8.7)
STD:403 (15.87) STD:643 (25.31) STD:1,143 (45)

Max Cutting Length mm (inch) 344 (13.54) 584 (22.99) 1,084 (42.68)
/MC:344 (13.54) /MC:584 (22.99) /MC:1,084 (42.68)
Chuck Size inch 8 8 8 (Sub:6) 8 8 (Sub:6)
Spindle
A2-6 A2-6
Type of Spindle Nose ASA A2-6 A2-6 A2-6
(Sub:A2-5) (Sub:A2-5)
4,500 4,500
Max Spindle Speed rpm 4,500 4,500 4,500
(Sub:5,000) (Sub:5,000)
Through Spindle Hole Ø 76 (Ø 2.99) Ø 76 (Ø 2.99)

Dia mm (inch) Ø 76 (Ø 2.99) Ø 76 (Ø 2.99)
[Sub:Ø 62 (Ø 2.44)]
Ø 76 (Ø 2.99)
[Sub:Ø 62 (Ø 2.44)]
Ø 65 (Ø 2.56) Ø 65 (Ø 2.56)
Max Bar Size mm (inch) Ø 65 (Ø 2.56) Ø 65 (Ø 2.56) Ø 65 (Ø 2.56)
[Sub:Ø 51 (Ø 2.01)] [Sub:Ø 51 (Ø 2.01)]
Spindle Bearing Inner Ø 110 (Ø 4.33) Ø 110 (Ø 4.33)

Dia mm (inch) Ø 110 (Ø 4.33) Ø 110 (Ø 4.33)
[Sub:Ø 90 (Ø 3.54)]
Ø 110 (Ø 4.33)
[Sub:Ø 90 (Ø 3.54)]
Main kW (HP) 18.5 / 15 (25 / 20)

Spindle
Motor 7.5 / 5.5 (10 / 7.4) 7.5 / 5.5 (10 / 7.4)
Sub kW (HP) - - -
[OPT : 11 / 7.5 (15 / 10)] [OPT : 11 / 7.5 (15 / 10)]
HS-T153-R5.0-20191219
Item
Turret
Number of Tool Stations ea STD:12, MC / SMC / YMC / YSMC:12 (24 Positions Index)
Tool Size mm (inch) O.D:□25 (□1), I.D:Ø 40 (Ø 1.5)
Turret Indexing Time sec/step 0.344
Axes
Rapid Speed 30 / 30 / 10 / - 30 / 30 / 10 / - 30 / 30 / 10 / 24 30 / 30 / 10 / - 30 / 30 / 10 / 24
m/min (ipm)
(X / Z / Y / B) (1,181 / 1,181 / 394 / -) (1,181 / 1,181 / 394 / -) (1,181 / 1,181 / 394 / 945) (1,181 / 1,181 / 394 / -) (1,181 / 1,181 / 394 / 945)
Max Stroke 240 / 460 / 120 / - 240 / 700 / 120 / - 240 / 700 / 120 / 665 240 / 1,200 / 120 / - 240 / 1,200 / 120 / 1,165
mm (inch)
(X / Z / Y / B) (9.45 / 18.11 / 4.72 / -) (9.45 / 27.56 / 4.72 / -) (9.45 / 27.56 / 4.72 / 26.18) (9.45 / 47.24 / 4.72 / -) (9.45 / 47.24 / 4.72 / 45.87)
Feed Motor 3.0 / 3.0 / 3.0 / - 3.0 / 3.0 / 3.0 / - 3.0 / 3.0 / 3.0 / 1.8 3.0 / 3.0 / 3.0 / - 3.0 / 3.0 / 3.0 / 1.8
kW (HP)
(X / Z / Y / B) (4 / 4 / 4 / -) (4 / 4 / 4 / -) (4 / 4 / 4 / 2.4) (4 / 4 / 4 / -) (4 / 4 / 4 / 2.4)
Tailstock
Max Stroke mm (inch) 460 (18.11) 700 (27.56) - 1,080 (42.52) -
Cylinder Diameter mm (inch) Ø 65 (Ø 2.56) Ø 65 (Ø 2.56) - Ø 100 (Ø 3.94) -
Quill Stroke mm (inch) - - - 120 (4.72) -
Center Taper MT #5 #5 - #5 -
Turnmill
Spindle Motor kW (HP) 5.5 / 3.7 (7.4 / 5)
Max Spindle Speed rpm 5,000
Max Drill / Tap Size mm (inch) Ø 20 (Ø 0.75) / M16
Min. Index Angle deg 0.0001 (Sub: 0.0001)

HS-T153-R5.0-20191219
Item
Tank
Lubrication ℓ (gal) 12 (3.17)
Hydraulic ℓ (gal) 11 (2.9)
SMC : 125 (33.02) SMC : 150 (39.63)

Coolant ℓ (gal) 115 (30.38) 125 (33.02) 125 (33.02) 140 (36.98) 150 (39.63) 165 (43.59)
/YSMC : 140 (36.98) /YSMC : 165 (43.59)
SMC : 210 (55.48) SMC : 235 (62.08)

Large Capacity Coolant (OPT) ℓ (gal) 200 (52.83) 210 (55.48) 210 (55.48) 225 (59.44) 235 (62.08) 250 (66.04)
/YSMC : 225 (59.44) /YSMC : 250 (66.04)
Power Sources
Electrical Power Supply kVA 35 40 35 40 35 40
Dimension
SMC : 1,934.5 (76.16) SMC : 1,934.5 (76.16)
Height mm (inch) 1,800 (70.87) 2,104 (82.83) 1,800 (70.87) 2,104 (82.83) 1,800 (70.87) 2,104
/YSMC : 2,104 (82.83) /YSMC : 2,104 (82.83)
SMC : 3,133 x 1,849.5 SMC : 3,753 x 1,849.5

2,893 x 1,849.5 2,893 x 1,924.5 3,133 x 1,849.5 3,133 x 1,924.5 (123.35 x 72.81) 3,753 x 1,849.5 3,753 x 1,924.5 (147.76 x 72.81)
Floor Space (L × W) mm (inch)
(113.9 x 72.81) (113.9 x 75.77) (123.35 x 72.81) (123.35 x 75.77) /YSMC:3,133 x 1,924.5 (147.76 x 72.81) (147.76 x 75.77) /YSMC:3,753 x 1,924.5
(123.35 x 75.77) (147.76 x 75.77)
SMC : 6,650 (14,661) SMC : 8,200 (18,078)

Weight kgf (lbf) 5,800 (12,787) 5,950 (13,118) 6,500 (14,330) 6,650 (14,661) 8,050 (17,747) 8,200 (18,078)
/YSMC : 6,800 (14,991) /YSMC : 8,350 (18,409)
NC Controller Fanuc 0i-TF (OPT : SIEMENS 828D)
HS-T153-R5.0-20191219
• Machine Specifications (Hi-TECH 230B)
Hi-TECH 230B Hi-TECH 230BL Hi-TECH 230BXL
Item
Capacity
SMC : Ø 690 (Ø 27.17) SMC : Ø 690 (Ø 27.17)
/YSMC : Ø 750 (Ø 29.53) /YSMC : Ø 750 (Ø 29.53)
SMC : Ø 529 (Ø 20.83) SMC : Ø 529 (Ø 20.83)

/YSMC : Ø 540 (Ø 21.26) /YSMC : Ø 540 (Ø 21.26)
STD : Ø 425 (Ø 16.73) STD:Ø 425 (Ø 16.73) STD : Ø 425 (Ø 16.73)

/MC : Ø 400 (Ø 15.75) /MC:Ø 400 (Ø 15.75) /MC : Ø 400 (Ø 15.75)
STD : Ø 213.6 (Ø 8.41) STD : Ø 213.6 (Ø 8.41) STD : Ø 213.6 (Ø 8.41)

Standard Cutting Dia mm (inch) Ø 221 (Ø 8.7) Ø 221 (Ø 8.7) Ø 277 (Ø 10.91) Ø 221 (Ø 8.7) Ø 277 (Ø 10.91)
/MC : Ø 221 (Ø 8.7) /MC : Ø 221 (Ø 8.7) /MC : Ø 221 (Ø 8.7)
STD : 379 (14.92) STD : 619 (24.37) STD : 1,119 (44.06)

/MC : 320 (12.6) /MC : 560 (22.05) /MC : 1,060 (41.73)
Spindle
A2-8 A2-8
(Sub:A2-5) (Sub:A2-5)
3,500 3,500
(Sub:5,000) (Sub:5,000)

Dia mm (inch) Ø 91 (Ø 3.58) Ø 91 (Ø 3.58)
[Sub:Ø 62 (Ø 2.44)]
Ø 91 (Ø 3.58)
[Sub:Ø 62 (Ø 2.44)]
Ø 81 (Ø 3.19) Ø 81 (Ø 3.19)
[Sub:Ø 51 (Ø 2.01)] [Sub:Ø 51 (Ø 2.01)]

Dia mm (inch) Ø 140 (Ø 5.51) Ø 140 (Ø 5.51)
[Sub:Ø 90 (Ø 3.54)]
Ø 140 (Ø 5.51)
[Sub:Ø 90 (Ø 3.54)]
Main kW (HP) 18.5 / 15 (25 / 20)

Spindle Motor
7.5 / 5.5 (10 / 7.4) 7.5 / 5.5 (10 / 7.4)
Sub kW (HP) - - -
[OPT : 11 / 7.5 (15 / 10)] [OPT : 11 / 7.5 (15 / 10)]
HS-T153-R5.0-20191219
Item
Turret
Number of Tool Stations ea STD:12, MC / YMC / SMC / YSMC:12 (24 Positions Index)
Axes
Rapid Speed 30 / 30 / 10 / - 30 / 30 / 10 / - 30 / 30 / 10 / 24 30 / 30 / 10 / - 30 / 30 / 10 / 24
m/min (ipm)
(X / Z / Y / B) (1,181 / 1,181 / 394 / -) (1,181 / 1,181 / 394 / -) (1,181 / 1,181 / 394 / 945) (1,181 / 1,181 / 394 / -) (1,181 / 1,181 / 394 / 945)
Max Stroke 240 / 460 / 120 / - 240 / 700 / 120 / - 240 / 700 / 120 / 640 240 / 1,200 / 120 / - 240 / 1,200 / 120 / 1,140
mm (inch)
(X / Z / Y / B) (9.45 / 18.11 / 4.72 / -) (9.45 / 27.56 / 4.72 / -) (9.45 / 27.56 / 4.72 / 25.2) (9.45 / 47.24 / 4.72 / -) (9.45 / 47.24 / 4.72 / 44.88)
Feed Motor 3.0 / 3.0 / 3.0 / - 3.0 / 3.0 / 3.0 / - 3.0 / 3.0 / 3.0 / 1.8 3.0 / 3.0 / 3.0 / - 3.0 / 3.0 / 3.0 / 1.8
kW (HP)
(X / Z / Y / B) (4 / 4 / 4 / -) (4 / 4 / 4 / -) (4 / 4 / 4 / 2.4) (4 / 4 / 4 / -) (4 / 4 / 4 / 2.4)
Tailstock
Turnmill
HS-T153-R5.0-20191219
Item
Tank
SMC : 125 (33.02) SMC : 150 (39.63)

Coolant ℓ (gal) 115 (30.38) 125 (33.02) 125 (33.02) 140 (36.98) 150 (39.63) 165 (43.59)
/YSMC : 140 (36.98) /YSMC : 165 (43.59)
SMC : 210 (55.48) SMC : 235 (62.08)

/YSMC : 225 (59.44) /YSMC : 250 (66.04)
Power Sources
Dimension
SMC : 1,934.5 (76.16) SMC : 1,934.5 (76.16)
Height mm (inch) 1,800 (70.87) 2,104 (82.83) 1,800 (70.87) 2,104 (82.83) 1,800 (70.87) 2,104
/YSMC : 2,104 (82.83) /YSMC : 2,104 (82.83)
SMC : 3,133 x 1,849.5 SMC : 3,753 x 1,849.5

2,893 x 1,849.5 2,893 x 1,924.5 3,133 x 1,849.5 3,133 x 1,924.5 (123.35 x 72.81) 3,753 x 1,849.5 3,753 x 1,924.5 (147.76 x 72.81)
(113.9 x 72.81) (113.9 x 75.77) (123.35 x 72.81) (123.35 x 75.77) /YSMC:3,133 x 1,924.5 (147.76 x 72.81) (147.76 x 75.77) /YSMC:3,753 x 1,924.5
(123.35 x 75.77) (147.76 x 75.77)
SMC : 6,650 (14,661) SMC : 8,200 (18,078)

Weight kgf (lbf) 5,800 (12,787) 5,950 (13,118) 6,500 (14,330) 6,650 (14,661) 8,050 (17,747) 8,200 (18,078)
/YSMC : 6,800 (14,991) /YSMC : 8,350 (18,409)
NC Controller Fanuc 0i-TF (OPT : SIEMENS 828D)
HS-T153-R5.0-20191219
• Machine Specifications (Hi-TECH 230C)
Hi-TECH 230C Hi-TECH 230CL Hi-TECH 230CXL
Item
Capacity
SMC : Ø 690 (Ø 27.17) SMC : Ø 690 (Ø 27.17)
/YSMC : Ø 750 (Ø 29.53) /YSMC : Ø 750 (Ø 29.53)
SMC : Ø 529 (Ø 20.83) SMC : Ø 529 (Ø 20.83)

/YSMC : Ø 540 (Ø 21.26) /YSMC : Ø 540 (Ø 21.26)
STD : Ø 425 (Ø 16.73) STD:Ø 425 (Ø 16.73) STD : Ø 425 (Ø 16.73)

/MC : Ø 400 (Ø 15.75) /MC:Ø 400 (Ø 15.75) /MC : Ø 400 (Ø 15.75)
STD : Ø 255 (Ø 10.04) STD : Ø 255 (Ø 10.04) STD : Ø 255 (Ø 10.04)

Standard Cutting Dia mm (inch) Ø 264 (10.39) Ø 264 (10.39) Ø 277 (Ø 10.91) Ø 264 (10.39) Ø 277 (Ø 10.91)
/MC : Ø 264 (10.39) /MC : Ø 264 (10.39) /MC : Ø 264 (10.39)
STD : 379 (14.92) STD : 619 (24.37) STD : 1,119 (44.06)

/MC : 320 (12.6) /MC : 560 (22.05) /MC : 1,060 (41.73)
Spindle
A2-8 A2-8
(Sub:A2-5) (Sub:A2-5)
3,500 3,500
(Sub:5,000) (Sub:5,000)

Dia mm (inch) Ø 91 (Ø 3.58) Ø 91 (Ø 3.58)
[Sub:Ø 62 (Ø 2.44)]
Ø 91 (Ø 3.58)
[Sub:Ø 62 (Ø 2.44)]
Ø 81 (Ø 3.19) Ø 81 (Ø 3.19)
[Sub:Ø 51 (Ø 2.01)] [Sub:Ø 51 (Ø 2.01)]

Dia mm (inch) Ø 140 (Ø 5.51) Ø 140 (Ø 5.51)
[Sub:Ø 90 (Ø 3.54)]
Ø 140 (Ø 5.51)
[Sub:Ø 90 (Ø 3.54)]
Main kW (HP) 22 / 18.5 (29 / 25)

Spindle Motor 7.5 / 5.5 (10 / 7.4)
7.5 / 5.5 (10 / 7.4)
Sub kW (HP) - - -
[OPT : 11 / 7.5 (15 / 10)] [OPT : 11 / 7.5 (15 / 10)]
HS-T153-R5.0-20191219
Item
Turret
Number of Tool Stations ea STD:12, MC / SMC / YMC / YSMC:12 (24 Positions Index)
Axes
Rapid Speed 30 / 30 / 10 / - 30 / 30 / 10 / - 30 / 30 / 10 / 24 30 / 30 / 10 / - 30 / 30 / 10 / 24
m/min (ipm)
(X / Z / Y / B) (1,181 / 1,181 / 394 / -) (1,181 / 1,181 / 394 / -) (1,181 / 1,181 / 394 / 945) (1,181 / 1,181 / 394 / -) (1,181 / 1,181 / 394 / 945)
Max Stroke 240 / 460 / 120 / - 240 / 700 / 120 / - 240 / 700 / 120 / 640 240 / 1,200 / 120 / - 240 / 1,200 / 120 / 1,140
mm (inch)
(X / Z / Y / B) (9.45 / 18.11 / 4.72 / -) (9.45 / 27.56 / 4.72 / -) (9.45 / 27.56 / 4.72 / 25.2) (9.45 / 47.24 / 4.72 / -) (9.45 / 47.24 / 4.72 / 44.88)
Feed Motor 3.0 / 3.0 / 3.0 / - 3.0 / 3.0 / 3.0 / - 3.0 / 3.0 / 3.0 / 1.8 3.0 / 3.0 / 3.0 / - 3.0 / 3.0 / 3.0 / 1.8
kW (HP)
(X / Z / Y / B) (4 / 4 / 4 / -) (4 / 4 / 4 / -) (4 / 4 / 4 / 2.4) (4 / 4 / 4 / -) (4 / 4 / 4 / 2.4)
Tailstock
Turnmill

HS-T153-R5.0-20191219
Item
Tank
SMC : 125 (33.02) SMC : 150 (39.63)

Coolant ℓ (gal) 115 (30.38) 125 (33.02) 125 (33.02) 140 (36.98) 150 (39.63) 165 (43.59)
/YSMC : 140 (36.98) /YSMC : 165 (43.59)
SMC : 210 (55.48) SMC : 235 (62.08)

/YSMC : 225 (59.44) /YSMC : 250 (66.04)
Power Sources
SMC : 45 SMC : 45
/YSMC : 50 /YSMC : 50
Dimension
SMC : 1,934.5 (76.16) SMC : 1,934.5 (76.16)
Height mm (inch) 1,800 (70.87) 2,104 (82.83) 1,800 (70.87) 2,104 (82.83) 1,800 (70.87) 2,104
/YSMC : 2,104 (82.83) /YSMC : 2,104 (82.83)
SMC : 3,233 x 1,849.5 SMC : 3,853 x 1,849.5

2,993 x 1,849.5 2,993 x 1,924.5 3,233 x 1,849.5 3,233 x 1,924.5 (127.28 x 72.81) 3,853 x 1,849.5 3,853 x 1,924.5 (151.69 x 72.81)
(117.83 x 72.81) (117.83 x 75.77) (127.28 x 72.81) (127.28 x 75.77) /YSMC :3,233 x 1,924.5 (151.69 x 72.81) (151.69 x 75.77) /YSMC :3,853 x 1,924.5
(127.28 x 75.77) (151.69 x 75.77)
SMC : 6,750 (14,881) SMC : 8,300 (18,298)

Weight kgf (lbf) 5,900 (13,007) 6,050 (13,338) 6,600 (14,551) 6,750 (14,881) 8,150 (17,968) 8,300 (18,298)
/YSMC : 6,900 (15,212) /YSMC : 8,450 (18,629)
NC Controller Fanuc 0i-TF
HS-T153-R5.0-20191219
• NC Specifications ※ ㅡ : Not available S: Standard O: Option
Item Specification STD MC SMC YMC YSMC Item Specification STD MC SMC YMC YSMC
Controlled Axis Interpolation Function
Controlled Axis (Cs Axis) 2-axes 2-axes 3-axes 5-axes 4-axes 6-axes Variable Lead Threading G34 S S S S S
Simultaneously Controlled 2-axes 2-axes 3-axes 4-axes 4-axes 4-axes Ref Position Return 1 st
G28 S S S S S
Axes
0.001mm, 0.0001deg, Ref Position Return Check G27 S S S S S
Least Input Increment S S S S S
0.0001inch 2 / 3 / 4th Ref Position Return G30 S S S S S
0.0001mm,
Least Input Increment 1/10 O O O O O Arbitrary Speed Threading O O O O O
0.00001inch
Inch / Metric Conversion G20, G21 S S S S S Feed Function
Stored Stroke Check 1 S S S S S
Stored Stroke Check 2,3 S S S S S Rapid Traverse Override F0, F25, F50, F100 S S S S S
Chamfering On / Off S S S S S
Backlash Compensation S S S S S Feed Per Minute (Mm/Min) G98 S S S S S
Feed Per Revolution (mm/rev) G99 S S S S S
Operation
Rapid Traverse Bell-shaped Acceleration /
Automatic & MDI Operation S S S S S Deceleration S S S S S
Program Number Search S S S S S Feedrate Override 0-150% S S S S S
Sequence Number Search S S S S S
Jog Feed Override 0-1,260 mm/min S S S S S
Dry Run, Single Block S S S S S
Manual Handle Feed 1unit S S S S S Program Input
Manual Handle Feed Rate x1, x10, x100 S S S S S
Tape Code EIA / ISO S S S S S
Interpolation Function Optional Block Skip 9 ea S S S S S
Positioning G00 S S S S S Program Number O4-digits S S S S S
Linear Interpolation G01 S S S S S
Sequence Number N8-digits S S S S S
Circular Interpolation G02, G03 S S S S S
Dwell (Per Seconds) G04 S S S S S Decimal Point Programming S S S S S
Polar Coordinate Coordinate System Setting G50 S S S S S
Interpolation
G12.1/G13.1 ㅡ S S S S
Coordinate System Shift S S S S S
Cylindrical Interpolation G7.1 ㅡ S S S S
Workpiece Coordinate System (G54-G59) S S S S S
Threading G32 S S S S S
Workpiece Coordinate System Preset (G92.1) S S S S S
Multiple Threading S S S S S
Threading Retract S S S S S Direct Drawing Dimension Programming S S S S S
Continuous Threading S S S S S G Code System A S S S S S
HS-T153-R5.0-20191219
• NC Specifications ※ ㅡ : Not available S: Standard O: Option
Item Specification STD MC SMC YMC YSMC Item Specification STD MC SMC YMC YSMC
Program Input Editing Operation
Programmable Data Input G10 S S S S S Part Program Storage Length 1,280 m (512 kB) S S S S S
Sub Program Call 10 folds nested S S S S S Number of Register Able
400 ea S S S S S
Programs
Custom Macro B S S S S S
Background Editing S S S S S
Addition of Custom Macro #100-#199,
S S S S S Extended Part Program Editing S S S S S
-common Variables #500-#999
Canned Cycles S S S S S Play Back S S S S S
Multiple Repetitive Cycle S S S S S Operation / Display
Multiple Repetitive Cycle Ⅱ S S S S S Clock Function S S S S S
Canned Cycles for Drilling S S S S S Self-diagnosis Function S S S S S
Manual Guide i S S S S S Alarm History Display S S S S S
Spindle Speed Function Help Function S S S S S

Run Hour And Parts Count Display S S S S S
Constant Surface Speed Control G96/G97 S S S S S
Spindle Override 0-150% S S S S S Graphic Function S S S S S
Spindle Orientation S S S S S Dynamic Graphic Display O O O O O
Rigid Tapping S S S S S
Multi-language Display (English, German, French,
Spindle Synchronous Control ㅡ ㅡ S ㅡ S Italian, Chinese, Spanish, Korean, Portuguese, Polish, S S S S S
Hungarian, Swedish,Russian)
Tool Function / Compensation
Tool Function T4-digits S S S S S Data Input / Output
Tool Offset Pairs 128pairs S S S S S
Reader / Puncher Interface CH1 RS232C S S S S S
Tool Nose Radius Compensation S S S S S
Reader / Puncher Interface CH2 RS232C S S S S S
Tool Geometry / Wear
S S S S S
Compensation Ethernet Interface S S S S S
Tool Life Management S S S S S Memory Card Interface S S S S S
Tool Presetter USB Card Interface S S S S S
Automatic Tool Offset S S S S S
option is required
Direct Input Tool Offset Value Tool Presetter
Others
Measured B S S S S S Display Unit 10.4" Color LCD S S S S S
option is required
HS-T153-R5.0-20191219
• NC Instruction
Item Explanation Item Explanation
Control Axes X,Z,Y,B, C Axis Automatic coordinate By means of this command, a certain position of the tool for
Least input increment setting example, a coordinate system whereby the tip of the cutting edge
X, Z,Y-Axis : 0.001 mm becomes (X,Z) of the coordinate system.
C-Axis : 0.0001° This coordinate is called as work coordinates.
X-Axis : 0.0005 mm (Radial value) Work coordinate system When the coordinate system actually set by the G50 command or
Increment system Least command increment shift the automatic coordinate system setting deviate from the
X-Axis : 0.0005 mm programmed work coordinate system, the set coordinate system
can be shifted
Z-Axis : 0.001 mm
Y-Axis : 0.001 mm Reference point return 1) Manual reference point return.
2) Automatic reference point return (G27, G28).
B-Axis : 0.001 mm
Interpolation function
Maximum command value ± 9999.999 mm Linear interpolation : Done by G01 command at feed rate code
Program memory capacity 1,280M(512kB) designated.
Part program editing as follows is possible by MDI operation. Circular interpolation : Any circular arc is interpolated by G02 or
1) Insert, Alter, Delete of word. G03, at feed rate F code designated.
Part program edit G02 : Clockwise. G03 : Counter Clockwise.
2) Delete of block or until the block designated.
3) Register, delete of program. When circular radius is command as R, any circular arc of 0°-
180°is interpolated, and when circular radius is command as
Block, word, address, format, can be altered (Inch format)
address I, K., any circular interpolation of 0°- 360°can be
Input format N4 G2 X(U)4.3 R(C)4.3 I4.3 C(H)4.3 K4.3 F3.4 B4.3 or S4, T4(2.2)
command
M2 or 3 P4(7) Q4
The following addresses can be used with a decimal point: X, Z, U, Thread cutting Can be cut using a G32 command in addition to equal lead.
Decimal point edit
W, R, C, F, I, K, A, H, B 1) Straight thread. 2) Tapered thread.
Command method Absolute / Incremental command is possible 3) Scroll thread
Each axis can independently feed rapidly and position by G00 Dwell Dwell is executed by the P, U, X commands. Setting Range 0 -
Positioning
command 999.999 sec. Decimal point be used with P address
Feed per minute and feed per spindle revolution is possible. Backlash compensation This function compensations for lost motion of the machine.
G98 : Feed per minute. (mm/min) Compensation value (0-2,550 mm) is set by parameter, for each
G99 : Feed per revolution. (mm/rev) axis (by least command increment).
Cutting federate
Feed rate range (Feed override 0 - 150% every 10%)
MDI & LCD All kinds of data information is input and displayed such as LCD
Feed per minute 0 - 1,260 (mm/min)
character display, program alarm, diagnosis program, etc.,
Feed per revolution 0.001 - 2,000 (mm/rev)
Auto acceleration Program No. search Program number of 4 digit continuous to 0 is searched by MDI &
Rapid Feed : Linear type  acceleration/deceleration LCD Panel
/deceleration
Cutting Feed : Exponential acceleration/deceleration Sequence No. search Sequence number in the program selected by MDI & LCD is
searched. (word is also searched by the same way in edit mode.)
Coordinate system setting By means of this command, a certain position of the tool for Miscellaneous function By the command of 3 digit figure after the address M, ON/OFF
example, a coordinate system whereby the tip of the cutting edge control from the machine is possible. Only one M code can be
(M function)
becomes (X,Z) of the coordinate system. command per block
This coordinate is called as work coordinates.
HS-T153-R5.0-20191219
• NC Instruction
Item Explanation Item Explanation
Spindle function Spindle speed is commanded by the 4-digit figure to address S. Tool nose radius G40 : Tool nose radius compensation cancel.
When this function is used with G96,it means cutting speed. G41 : Moving on the left side of the programmed path.
(S function) compensation
When with G97, it means rpm G42 : Moving on the right side of the programmed path.
Tool function Maximum offset value: + 999.999 mm
Turret position can be selected and tool position offset can be
Chamfering & corner R In case of linear cutting perpendicular to or parallel with the axis,
(T function) done by the command of 2 digits after the address T
when next command is chamfering or corner R, linear cutting,
Tool position offset Designating the number of tool position offset by the 2 lower digits chamfering or corner R cutting is accomplished by commanding one
block
of the 4 digits address T, can make tool wear offset possible.
Portable tape reader Program, Parameter and etc., are used for reading out of NC
Offset pairs are 128, offset amount is ranging 0 ± 999.999 mm Inch / Metric conversion Inch system and Metric system are selected to input by G code
Dry run Feed rate becomes jog speed (for both cutting feed and for rapid cutting
moves). G20 : Inch input. G21 : Metric input
Single block Program can be executed one step at a time Changing of tool offset
Offset value can be set program command (G10).
Optional block skip Turning on the optional block skip switch ignores the block amount
including "/" code at the beginning. Custom macro Having registered macro commands as sub program, in memory.
Machine lock When the switch is set to the Machine Lock position, move This function is able to recall at anytime the NC command program
command pulses are suppressed. Consequently the display is by this simple procedure
updated as specified by the program, but the tool does not move. Additional program
The M, S, T and 2nd auxiliary function are executed. This function Impossible (Max 1,280M(512kB)
is used to check a program memory
Feed hold Input/output of alarm display can be signaled by pressing alarm,
External tool
DGNOS key of MDI panel This is the function to offset the tool offset value from out side the
Stored stroke limit 1 An area inside the area set by parameter is deemed as prohibited CNC. Offset value is automatically added to the input data of NC
compensation
area, when stroke is commanded into this area, this function
Additional tool offset This number of tool position offsets and tool nose R, compensation
makes the axis decelerate and stop than OT alarm displayed
is maximum 128 pairs.
Canned cycles 1) G90 : Cutting Cycle A --- Outer
diameter/internal diameter cutting Tool geometry offset and This is a special type of tool offset, offset value regarding tool
2) G92 : Thread Cutting Cycle installing position (geometry) and offset value regarding tool wear
3) G94 : Cutting Cycle B --- End face turning cycle tool wear offset offset, both are stored and tool offset is done accordingly. Offset
pairs are 128 pairs each.
Constant surface speed By the direct command of surface speed by S4-digit makes the
control motor rpm to be controlled continuously so that cutting speed of Run hour display 2 items, moving time and the number of parts are displays on the
spindle can be constant, in spite of the alteration of tool position. position screen.
G96 : Constant surface speed control is executed. Part counter : The total number of parts are displayed . . . counted
G97 : Constant surface speed control is not executed by either M02, M03.
Multiple repetitive cycle (1) G70 : Finishing Cycle Run hour : Accumulated running to hour display . . . accumulated
(2) G71 : Stock removal in turning. running to hour of automatic operation.
(3) G72 : Stock removal in facing. Cycle time : Cycle time display . . . Running hour display of one
(4) G73 : Pattern repeating. automatic cycle.
(5) G74 : End face peck drilling cycle.
Solid tapping When tapping, high speed and high accuracy tapping can be done
(6) G75 : Outer diameter/internal diameter drilling cycle. by running the spindle and X, Z axis synchronous
(7) G76 : Multiple thread cutting cycle HS-T153-R5.0-20191219
3. Detailed Information (3-7 Packing Dimension)
Dimension (mm) CBM Weight (kgf)
No Model Contents
Length Width Height (m3) N/W G/W
1 Machine 3,200 2,200 2,150 15.136 5,800 6,400
STD,
2 Machine+T/F 3,700 2,200 2,150 17.501 5,900 6,500
MC
3 Hi-TECH 230A/B Machine+C/C+T/F 4,350 2,200 2,150 20.576 6,000 6,600
4 Machine 3,200 2,200 2,500 17.600 5,950 6,550

YMC
5 Machine+C/C+T/F 4,350 2,200 2,500 23.925 6,150 6,750
6 Machine 3,300 2,200 2,150 15.609 5,900 6,500
STD,
7 Machine+T/F 3,800 2,200 2,150 17.974 6,000 6,600
MC
8 Machine+C/C+T/F 4,450 2,200 2,150 21.049 6,100 6,700

Hi-TECH 230C
9 Machine 3,300 2,200 2,500 18.150 6,050 6,650
10 YMC Machine+T/F 3,800 2,200 2,500 20.900 6,150 6,750
11 Machine+C/C+T/F 4,450 2,200 2,500 24.475 6,250 6,850
HS-T153-R5.0-20191219
No Model Contents
(m3)
Length Width Height N/W G/W
12 Machine 3,200 2,200 2,150 15.136 6,500 7,100

STD,
13 Machine+T/F 3,900 2,200 2,150 18.447 6,600 7,300
MC
14 Machine+C/C+T/F 4,880 2,200 2,150 23.082 6,700 7,400
15 Machine 3,400 2,200 2,500 18.700 6,650 7,350
16 YMC Machine+T/F 3,900 2,200 2,500 21.450 6,750 7,450
17 Machine+C/C+T/F 4,880 2,200 2,500 26.840 6,850 7,550

Hi-TECH 230AL/BL
18 Machine 3,200 2,200 2,150 15.136 6,650 7,350
19 SMC Machine+T/F 3,900 2,200 2,150 18.447 6,750 7,450
20 Machine+C/C+T/F 4,880 2,200 2,150 23.082 6,850 7,550
21 Machine 3,400 2,200 2,500 18.700 6,800 7,500
22 YSMC Machine+T/F 3,900 2,200 2,500 21.450 6,900 7,600
23 Machine+C/C+T/F 4,880 2,200 2,500 26.840 7,000 7,800

STD,
24 Machine+C/C+T/F 4,880 2,200 2,250 24.156 6,800 7,500
MC
25 Machine 3,500 2,200 2,500 19.250 6,750 7,450
26 YMC Machine+T/F 3,900 2,200 2,500 21.450 6,850 7,550
27 Machine+C/C+T/F 4,880 2,200 2,500 26.840 6,950 7,650

Hi-TECH 230CL
28 SMC Machine+C/C+T/F 4,880 2,200 2,250 24.156 6,950 7,650
29 Machine 3,500 2,200 2,500 19.250 6,900 7,600
30 YSMC Machine+T/F 3,900 2,200 2,500 21.450 7,000 7,800
31 Machine+C/C+T/F 4,880 2,200 2,500 26.840 7,100 7,900
HS-T153-R5.0-20191219
No Model Contents
(m3)
Length Width Height N/W G/W
32 Machine 4,500 2,200 2,550 25.245 8,200 8,700

YMC
33 Machine+C/C+T/F 5,650 2,200 2,550 31.697 8,350 8,950
Hi-TECH 230AXL/BXL
34 Machine 4,500 2,200 2,550 25.245 8,350 8,850
YSMC
35 Machine+C/C+T/F 5,650 2,200 2,550 31.697 8,500 9,100
HS-T153-R5.0-20191219
4. Main Specifications
Hi-TECH 230A/B/C Hi-TECH 230AL/BL/CL Hi-TECH 230AXL/BXL/CXL

Item
Max Cutting Dia mm (inch) STD : ØØ425 (Ø 16.73) Ø 400 (Ø 15.75) STD : Ø 425 (Ø 16.73) Ø 400 (Ø 15.75) STD : Ø 425 (Ø 16.73) Ø 400 (Ø 15.75)
/ MC : 400 (Ø 15.75) / MC : Ø 400 (Ø 15.75) / MC : Ø 400 (Ø 15.75)
A-STD:403 (15.87) , AL-STD:643 (25.31), AXL-STD:1,143 (45)

MC:344 (13.54) A-344 (13.54) MC:584 (22.99) AL-584 (22.99) , MC:1,084 (42.68) AXL-1,084 (42.68)
Max Cutting Length mm (inch)
B/C-STD:379 (14.92), B/C-320 (12.6) BL/CL-STD:619 (24.37), BL/CL-560 (22.05) BXL/CXL-STD:1,119 (44.06), BXL/CXL-1,060 (41.73)
MC:320 (12.6) MC:560 (22.05) MC:1,060 (41.73)
Chuck Size inch A:8, B/C:10 AL:8, BL/CL:10 AL:8, BL/CL:10 (Sub:6) AXL:8, BXL/CXL:10 AXL:8, BXL/CXL:10 (Sub:6)
A-4,500 AL-4,500 AL-4,500(Sub:5,000) AXL-4,500 AXL-4,500(Sub:5,000)

Max Spindle Speed rpm
B/C-3,500 BL/CL-3,500 BL/CL-3,500(Sub:5,000) BXL/CXL-3,500 BXL/CXL-3,500(Sub:5,000)
A-Ø 65 (Ø 2.56) AL-Ø 65 (Ø 2.56) AL-Ø 65 (Ø 2.56) AXL-Ø 65 (Ø 2.56) AXL-Ø 65 (Ø 2.56)
Max Bar Size mm (inch) BL/CL-Ø 81 (Ø 3.19) BXL/CXL-Ø 81 (Ø 3.19)
B/C-Ø 81 (Ø 3.19) BL/CL-Ø 81 (Ø 3.19) [Sub:Ø 51 (Ø 2.01)] BXL/CXL-Ø 81 (Ø 3.19) [Sub:Ø 51 (Ø 2.01)]
A/B - 18.5 / 15 (25 / 20)

Main kW (HP)
C - 22 / 18.5 (29 / 25)
Spindle Motor
7.5 / 5.5 (10 / 7.4) 7.5 / 5.5 (10 / 7.4)
Sub kW (HP) - - -
[OPT : 11 / 7.5 (15 / 10)] [OPT : 11 / 7.5 (15 / 10)]
Number of Tool Station ea STD:12, MC / SMC / YMC / YSMC:12 (24 Positions Index)
NC Controller Fanuc 0i-TF (OPT: SIEMENS 828D – 230A/B)
The design and specifications of this product are subject to change without notice for product improvement.
HS-T153-R5.0-20191219
5. Customer Service
Hwacheon Headquarter Hwacheon America Hwacheon Europe Hwacheon Asia
HEAD OFFICE USA GERMANY

HWACHEON MACHINE TOOL CO., LTD. HWACHEON MACHINERY AMERICA, INC. HWACHEON MACHINERY EUROPE GMBH
123-17, HANAMSANDAN 4BEON-RO, GWANGSAN-GU, GWANGJU, KOREA 555 BOND STREET, LINCOLNSHIRE, ILLINOIS, 60069, USA JOSEF-BAUMANN STR. 25, 44805, BOCHUM, GERMANY
TEL: +82-62-951-5111 FAX: +82-62-951-0086 TEL: +1-847-573-0100 FAX: +1-847-573-9900 TEL : +49-234-912-816-0 FAX: +49-234-912-816-60
SEOUL OFFICE SINGAPORE INDIA

46, BANGBAE-RO, SEOCHO-GU, SEOUL, KOREA HWACHEON ASIA PACIFIC PTE. LTD. HWACHEON MACHINE TOOL INDIA PTE. LTD.
TEL: +82-2-523-7766 FAX: +82-2-523-2867 21 BUKIT BATOK CRESCENT, #08-79 WCEGA TOWER, 103, GULMOHAR CENTRE POINT,34/A,WADGAON
SINGAPORE 658065 SHERI, PUNE 411 014, INDIA
TEL: +65-6515-4357 FAX: +65-6515-4358 TEL: +91-20-6560-0168
VIETNAM CHINA
HWACHEON MACHINE TOOL VIETNAM CO., LTD. HWACHEON MACHINE TOOL CHINA CO., LTD.
UNIT 507, 5th FLOOR, LOT T2-4, D1 ROAD, SAIGON HI-TECH PARK, B03A LIANGUAN JUHE INTERNATIONAL HARDWARE
TAN PHU WARD, DISTRICT 9, HO CHI MINH CITY, VIETNAM CITY, NO. 143 ZHENANZHONG ROAD, JINXIA,
TEL : +84 (0)28-2253-2613 FAX: +84 (0)28-2253-2614 CHANGAN TOWN, DONGGUAN CITY, GUANDONG
PROVINCE , CHINA #523852
Tel: +86-769-8932-0601 FAX: +86-769-8932-0602
HS-T153-R5.0-20191219
(1) Last Update : Dec. 19th, 2019
(2) Responsible: Marketing Team
(3)Rectification:
[1.0] Aug. 31st, 2016 : The first edition
[1.1] Oct. 6th, 2016 : Add Packing Dimension
[1.2] Oct. 18th, 2016 : Correction of Standard and Optional Accessories Status (Tool Life Management)
[1.3] Nov. 14th, 2016 : Correction of orthography of Chuck Dual Pressure [Dual Pressure (Chuck / C-axis brake)]
[1.4] Nov. 28th, 2016 : Add Torque Diagram of Hi-TECH 230C
[1.5] Dec. 06th, 2016 : Standard application of Signal Lamp with 3 Colors
[1.6] Jan. 05th, 2017 : Sentence segmentation of Dual Pressure (Chuck / C-axis brake)
[1.7] Feb. 22nd, 2017 : Correction of Coolant Tank Capacity
[1.8] Mar. 24th, 2017 : Add YSMC to Moving Range & Turret Interference Diagram
[1.9] Mar. 31st, 2017 : Correction of C-axis Index Angle (0.001 -> 0.0001)
[1.10] Apr. 26th, 2017 : Correction to Spindle Override of NC specification (50->120% > 0->150%)
[2.0] May. 25th, 2017 : Modify the Sales Manual according to SMC addition
[2.1] Jul. 25th, 2017 : 1. Correction of Tooling Diagram (inch Tool)
2. Add Sub Double O.D Holder
[2.2] Aug.18th, 2017 : Correction of Machine Height (SMC)
[2.3] Oct. 29th, 2017 : 1. Add of Sub Spindle Motor
2. Correction of Turret Interference Diagram
[2.4] Nov. 27th, 2017 : 1. Correction of Turret interference Diagram
2. Correction of Tooling Diagram
[2.5] Jan. 11st, 2018 : Corporate contact and address modification.
[2.6] Feb. 01st, 2018 : Specification update with HRV3+
[2.7] Feb. 14th, 2018 : Deleted the 12 Stations and 24 Stations words in the tool interference page.
[2.8] Mar. 26th, 2018 : Correction of Feed Motor to Hi-TECH 230C
[3.0] Apr. 18th, 2018 : Delete the ‘ Confidential ‘ word

[3.1] May. 2nd, 2018 : Correction of turnmill holder products number
[3.2] Oct. 1st, 2018 : 1. Added SIEMENS controller (Machine Size, Foundation, Torque Diagram)
2. Added I.D Holder Sleeve to Tooling Diagram (Ø 25, Ø 32)
3. Correction of Part Catcher (bucket type)
[3.3] Oct. 5th, 2018 : Added Turret interference Diagram & Moving Range (VDI40)
[3.4] Oct.23rd, 2018 : Tooling Diagram Update
[3.5] Oct. 31st, 2018 : Added Large Capacity Coolant Tank
[3.6] Nov. 9th, 2018 : Correction of typo
[3.7] Nov. 21st, 2018 : Corrected the (Y)SMC type Sub O.D Cutting holder part number.
[3.8] Nov. 27th, 2018 : Corrected the tool specifications of the double o.d holder.
[3.9] Dec. 26th, 2018 : Correction of Electrical Power Supply
[3.10] Dec. 28th, 2018 : Correction of Machine Weight & Packing Dimension
[4.0] Feb. 1st, 2019 : Modify the Sales Manual according to XL Type addition
[4.1] Apr. 2nd, 2019 : Modify the Accessories Page (Separated the terms "station" and "positions" of the turret)
[4.2] Apr. 24th, 2019 : Change the M-VISION Plus image
[4.3] May. 15th, 2019 : Added missing Sleeve part number. ( (Y)SMC Ø 32 Double I.D Holder Sleeve)
[4.4] Jun. 13th, 2019 : 1. Added SIEMENS Specification (XL Type)
2. Added a cautionary note to Coolant Pump of the Options Sheet
(*For 7 MPa, only water soluble coolants are available)
[4.5] Aug. 6th, 2019 : steady Rest Page wording changes.
[4.6] Oct. 21st, 2019 : Add A/B/C XL STD type moving range and Correction of accessories status (Turnmill holder STDOPT)
[5.0] Dec. 19th, 2019 : Add hyperlink at contents page

Hi-TECH 230-4 (9.0)

Uploaded by

Copyright:

Available Formats

Hi-TECH 230-4 (9.0)

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Hi-TECH 230-4 (9.0)

Uploaded by

Copyright:

Available Formats

Hi-TECH 230

8-10” Chucker Box Way Type

3-1 Product Line-up

Contents 2-3 Y-axis Machining

3-4 Hwacheon Software

3-6 Machine / NC Specifications

3-7 Packing Dimension

X-axis “Minimize Thermal Displacement of the Frame”

Max Stroke Rapid Speed

Max Cutting Dia

1,143 mm (45 inch)

Max Cutting Dia (a) Max Cutting Length (b)

Hi-TECH 230C/CL/CXL MC/YMC 320 / L:560 / XL:1,060 (12.6 / L:22.05 / XL:41.73)

Ys-axis The largest Y-axis stroke in class

Finishing using Y-axis Multi-face machining

Milling at the position deviated Circular interpolation

Y-axis stroke Y-axis Rapid Speed Inclination angle (deg)

Hi-TECH 230 SERIES Y(S)MC ±60 (±2.36) 10 (394) 30

Enhanced high-power motor compared to existing 8-10” lathes

“Enhanced Cutting Performance and Productivity”

 Fast and easy to control  placed the main spindle motor in a

Hi-TECH 230A 4,500 330 Ø 65 (Ø 2.56) A2-6

First Process Transfer (Synchronizing) Second Process

“Multiplex Machining Realized Using Sub-spindle”

Hi-TECH 230 SERIES 6 5,000 7.5 / 5.5 (10 / 7.4) 86

*Sub Spindle is Long Type / Extra Long Type Only.

Its digital tailstock (hydraulic) makes setting

“Setting Time Reduced by 70% or More”

Max Stroke Cylinder Diameter Center Taper

The Quill is activated by foot pedal or program.

Tailstock body of standard machine can be

Standard: Tailstock Body & Quill program (Programmable)

Max Stroke Quill Stroke Cylinder Diameter Center Taper

*XL : Extra Long Bed

1 ② The largest turnmill motor in class : 5.5 / 3.7 kW

④ Enhanced turret rigidity : The reduced distance between the disk

• Double O.D Holder • Double I.D Holder

Tool Size Turret Indexing Max Speed of Disk width

Existing 8-10” lathes

The guide way contact area is increased by 40%.

“Minimized Machining Error Caused by

“Easy Precision Control Using GIB”

182 (7.17) 220 (8,661) 0.27 421 6 (0.24) 356.4

Material Dia Cutting Speed Feed Spindle Speed Cutting Depth

Finishing 70.1 (2.76) 150 (5,906) 0.1 680 0.1 (0.004)

55 (2.17) 120 (4,724) 0.18 694 50 (1.97) 297

150 (5,906) 5 (0.2) 0.25 187.5

20 (0.79) 30 (1,181) 0.1 478 30 (1.18) 15

Cutting Speed Feed Spindle Speed Tapping Depth

63 (2.48) 198 (7,795) 300 1,000 4 (0.16) 75.6

A / STD A-Type B-Type C-Type B / STD

AXL / STD C / STD

Hi-TECH 230A Hi-TECH 230AL Hi-TECH 230AXL

Hi-TECH 230A Hi-TECH 230AL Hi-TECH 230AXL

32 Tailstock Servo Tailstock (use Servo motor & Ball screw) ○ ○ ○ ○ ○ ○ X X ○ ○ ○ X X

33 Body & Quill Programmable Tailstock X X X X X X X X S S S X X

Rest Steady for Base

Coolant Pump 0.6 / 1.5 / 3 / 7 MPa

40 Options Coolant Chiller ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○