The RA-7100 is a dual-band fiber optical repeater that supports 850MHz and 1900MHz frequency bands. It consists of a master optical unit and remote units that connect via single-mode fiber. The remote units can enhance coverage for applications like citywide networks, highways, airports and tunnels. The master unit supports up to four remote units and the remote units have weatherproof enclosures for outdoor installation. The system uses wavelength division multiplexing over a single fiber to transmit both frequency bands between the units.
The RA-7100 is a dual-band fiber optical repeater that supports 850MHz and 1900MHz frequency bands. It consists of a master optical unit and remote units that connect via single-mode fiber. The remote units can enhance coverage for applications like citywide networks, highways, airports and tunnels. The master unit supports up to four remote units and the remote units have weatherproof enclosures for outdoor installation. The system uses wavelength division multiplexing over a single fiber to transmit both frequency bands between the units.
The RA-7100 is a dual-band fiber optical repeater that supports 850MHz and 1900MHz frequency bands. It consists of a master optical unit and remote units that connect via single-mode fiber. The remote units can enhance coverage for applications like citywide networks, highways, airports and tunnels. The master unit supports up to four remote units and the remote units have weatherproof enclosures for outdoor installation. The system uses wavelength division multiplexing over a single fiber to transmit both frequency bands between the units.
The RA-7100 is a dual-band fiber optical repeater that supports 850MHz and 1900MHz frequency bands. It consists of a master optical unit and remote units that connect via single-mode fiber. The remote units can enhance coverage for applications like citywide networks, highways, airports and tunnels. The master unit supports up to four remote units and the remote units have weatherproof enclosures for outdoor installation. The system uses wavelength division multiplexing over a single fiber to transmit both frequency bands between the units.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1/ 4
850MHz+1900MHz Dual-Band Fiber Optical Repeater
RA-7100 Features Dual-band configuration supports two frequency bands in a single system. e.g., 850MHz+1900MHz Full operation bandwidth system supports multi-operator or multi-network application. Single optical fiber between Master Optical Unit (MOU) and Remote Unit (RU) with built-in WDM. RU can be remotely controlled via the optical fiber link. The equipment enclosure of RU is designed for all-weather outdoor installation Waterproof, damp-proof and omni-sealed (IP65).
Product Description The RA-7100 Dual-band Fiber Optical Repeater is an integrated solution for coverage enhancement. The system consists of the Master Optical Unit (MOU) and Remote Unit (RU). The MOUs modular design can support up to four RUs by adding additional optical interface card. The RUs fully weatherized enclosure with the built-in AC power surge arrestor allows product installation at any outdoor environment and powered by exposed power lines. This solution is an effective point-to-multipoint distributed antenna system that provides effective coverage enhancement. It uses single-mode fibre and is suitable for applications where large signal coverage is required, such as citywide enhancement, highway and canyons, campus, underground tunnels, airports and convention centres, etc.
Functional Block Diagram
Information contained in this document is subject to confirmation at time of ordering. http://www.comba-telecom.com
Issued:11Dec09 Control: 0-0-2 1/4
850MHz+1900MHz Dual-Band Fiber Optical Repeater
RA-7100 Preliminary Technical Specifications System Specifications System Optical Fibre Optical Wavelength Optical Link Frequency Max. Optical Path Loss Maximum Remote Unit per Master Unit nm MHz dB 850MHz, 1900MHz Single Mode 1310, 1550 + WDM 800 2200 6.5 4
Master Optical Unit (MOU) Optical Specifications
Optical Wavelength Optical Output Power Optical Return Loss Optical Link Gain nm dBm dB dB
850MHz
1900MHz
1310 + WDM -1 2 > 50 0
Electrical Specifications Uplink Output Power Uplink Maximum Gain Downlink Uplink Gain Adjustable Range (1dB step) Absolute Max. Input RF Power Input Coupling Signal dBm dB dB dBm -10 -10 -8 0 10 10 1x Dual-band DL + 1x Dual-band UL or 1x DL/UL+1x DL/UL
Mechanical Specifications Dimensions, H x W x Optical Unit D Passive Unit Weight (approx.) Power Supply AC110/220 DC-48 mm kg VAC VDC W hr 482 x 360 x 44 (19 1U) 482 x 360 x 88 (19 2U) 12 85 264/47 63Hz -76 -38 35 3 FC/APC SMA Female o
Power Consumption (approx.) MCU Battery Backup Time (approx.) Fiber Connectors RF Connectors Operating Temperature Operating Humidity Environmental Class MTBF
-20 to +40 95 Indoor > 50,000 Note: Typical specification at room temperature
% hr
Information contained in this document is subject to confirmation at time of ordering. http://www.comba-telecom.com
Issued:11Dec09 Control: 0-0-2 2/4
850MHz+1900MHz Dual-Band Fiber Optical Repeater
RA-7100 Preliminary Technical Specifications
Remote Unit (RU)
Optical Specifications Optical Optical Optical Optical Wavelength Output Power Return Loss Link Gain Uplink Downlink nm dBm dB dB
Electrical Specifications Frequency Range MHz MHz dBm dB dB dB dB sec Operating Bandwidth Downlink Output Power Uplink Maximum gain Downlink Gain Adjustable Range(1dB step) Pass Band Ripple (p-p) Uplink Noise Figure at Maximum Gain System Group Delay 1850 1910 1930 1990 60 37
Mechanical Specifications Dimensions, H x W x D Weight (approx.) Power Supply Power Consumption (approx.) Power Up Waiting Time (approx.) MCU Battery Backup Time (approx.) RF Connectors Fiber Connectors Operating Temperature Operating Humidity Enclosure Cooling Environmental Class MTBF hr o
mm kg VAC W sec hr
490 x 370 x 228 35 85 264 / 47 63Hz 190 60 3 N Female FC/APC
-33 to +55 95 Fan IP65 > 50,000
Note: *Typical specification at room temperature and 10dB optical loss
Information contained in this document is subject to confirmation at time of ordering. http://www.comba-telecom.com
Issued:11Dec09 Control: 0-0-2 3/4
850MHz+1900MHz Dual-Band Fiber Optical Repeater
RA-7100 Operation and Maintenance Installation and commissioning of RA-7100 can be accomplished by the OMT software via direct connection to a PC that facilitates remote monitoring and parameter adjustment. An optional Operations and Maintenance Center (OMC) software can be incorporated for central monitoring of Comba Products with SNMP interface. The MOU and RU are communicated over the optical Fiber, hence, the RUs can be remotely controlled by connection to MOU locally or remotely Adjustable parameters include: Uplink Gain Setting, Downlink Gain Setting, Alarm Threshold Setting, etc. Monitored parameters include: Downlink Output Power, Temperature, etc. Alarm parameters include: Downlink Output Power Low, Optical Alarm, Door Open, Temperature, etc.
Outline Drawing
MT FAN
Note: Not to scale
Information contained in this document is subject to confirmation at time of ordering. http://www.comba-telecom.com
