Scribd
Upload
47 views3 pages

Data0305 MX485net

The document summarizes the MX-485 Network, which allows up to 248 Matrix control panels to be linked into a common network via RS485 communication. This enables a local monitoring center to receive events from the linked panels and remotely program and control the panels. The network provides full supervision of connected systems while allowing the Matrix panels to retain independence with their own communicators to call the monitoring center in case of a network fault.

Uploaded by

Abdelhamid Sammoudi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
47 views3 pages

Data0305 MX485net

The document summarizes the MX-485 Network, which allows up to 248 Matrix control panels to be linked into a common network via RS485 communication. This enables a local monitoring center to receive events from the linked panels and remotely program and control the panels. The network provides full supervision of connected systems while allowing the Matrix panels to retain independence with their own communicators to call the monitoring center in case of a network fault.

Uploaded by

Abdelhamid Sammoudi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Network

control panel network MX-485 Network


INDUSTRIAL / COMMERCIAL /
RESIDENTIAL
Networked Security System
Main Features

Network
Systems
• Max number of control panels: up to 248
Matrix Control Panels
• Max number of independent systems: up to 992
• Max number of zones: 7934
• Max number of PGMs: 2976
• Max number of RS485 buses: 2
• Max number of MX485/4, MX485/4b modules
per bus: 31
• Networkable with; Matrix 6, Matrix 816, Matrix 424,
Matrix 832, Matrix 832+

System Overview
The MX-485 Network is the ideal solution where there is local monitoring of many independent premises via a
local network. It allows up to 248 Matrix control panels to be linked into one common network based on a RS485
communication protocol.

The MX-485Network enables the local monitoring center not only to receive Contact ID events transmitted by the
linked Matrix panels via the RS485.

Even if used with the MX485 network, the Matrix panels still retain their independency and can be used to back up
calls via the built in digital communicator. In addition using the MX-VOICE module voice messages can be sent to
the user informing them of alarm or maintenance events.

The basic system can reach up to 1km in length, however by the use of RS485 repeaters it is possible to expand the
coverage.

Feature Benefits
Extensive system via a local network Ensures full supervision of the network line with no additional
call costs.
Uni-directional Network 1. Ensures Contact ID events transmitted via the network to
the with the following control panels: monitoring centre using MX-MON software.
MX-6 2. Remote maintenance without visiting each individual
MX-816 system.

Bi-directional Network 1. Ensures Contact ID events transmitted via the network to


with the following control panels: the monitoring centre using MX-MON software.
MX-424 2. Remote maintenance without visiting each individual
MX-832 system.
MX-832+ 3. Enables the full programming of the control panels using
the network reducing installation time.
4. Remote arm / disarm via the MX485Network
5. Remote triggering of the Matrix PGMs (Programmable
Outputs) via the MX485Network Long distance monitoring
by using VPN It is possible to manage long distance
connection to the site. (Virtual Private Networking)

Network Independency
Matrix panels retain their full independency from the network, therefore if the network is down there is no
compromise on security. It is even possible to set up the digital communicator within the panels to call in
the event of a network fault.

www.pyronix.com [email protected]
Network Diagram

Additional Accessories
Panel Name Network Integration Product Name Description Pyronix Product Code

Matrix 6 Uni-directional only to monitoring centre MX-485/4 Uni-directional hub from FPMX485/4
Matrix 816 Matrix to RS485. Enables
connection of up to 4 panels.

Matrix 424 Bi-directional between monitoring centre and


Matrix 832 panel MX-485/4b Bi-directional hub from Available Soon
Matrix 832+ Available Soon Matrix to RS485. Enables
connection of up to 4 panels.

MX-MON Windows based multi-language FP12010


monitoring software allowing the
monitoring of full Contact ID
events reported from the Matrix
panels via the MX485Network.
The software is able to manage
multi-layer maps of the protected
premises. Software can be
customized by the user to suit
every monitoring centers’
requirements
RS485/Repeater Extends the length of the RS485
bus by 1 KM FP485REP
RS232 to RS485 Enables connection of the COM
Converter port on a PC via MX-MON
software to the RS485 Network FPMX485/232
As part of the continued development programme
specifications may change.

Matrix, PCX, Sterling, Vocaliser, KX, Colt, ME, Magnum, Kudos, Octopus,
Eclipse, Veritec, Break Glass 2000, Twin Alert, Belle and Decibell are all
trade marks of Pyronix Ltd

You might also like