0% found this document useful (0 votes)
402 views35 pages

Slab Design - Ok

This document contains calculations for the design of a one-way reinforced concrete slab according to BS8110 standards. It includes the slab geometry, loading, material properties, moment and shear calculations, and reinforcement details. Ultimate moments and shears are calculated and compared to the design values and capacities. Reinforcement amounts are determined and checked for deflection and spacing requirements. Additional calculations are shown for reinforcement needed to support a brick wall load on a concrete strip.

Uploaded by

azwan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
402 views35 pages

Slab Design - Ok

This document contains calculations for the design of a one-way reinforced concrete slab according to BS8110 standards. It includes the slab geometry, loading, material properties, moment and shear calculations, and reinforcement details. Ultimate moments and shears are calculated and compared to the design values and capacities. Reinforcement amounts are determined and checked for deflection and spacing requirements. Additional calculations are shown for reinforcement needed to support a brick wall load on a concrete strip.

Uploaded by

azwan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 35

### CALCULATION SHEET

KESHMEN CONSULT SDN BHD SHEET____1__ OF ______


CIVIL & STRUCTURAL CONSULTING ENGINEERS
12A-3 Jalan PJS 11/28, Bandar Sunway, 46150 Petaling Jaya, Selangor Designed by Date
Tel: (03) 56323750, (03) 56341572 Fax: (03) 56340356
PROJECT Checked by Job No

Design of One-Way Reinforced Concrete Slab to BS8110 SLAB-1-B


Version No: 6.01.01
Identification :

Slab geometry
Width of slab, Lx = 6000 mm
Thickness of slab, h = 200 mm B'wall weight = 0 kN/m2
Top cover to bar, c = 25 mm
Bot. cover to bar, c = 25 mm

Slab loading
Self weight = 4.80 kN/m2
Finishes = 1.80 kN/m2

Dead load Gk = 6.60 kN/m2


Live load Qk = 0.00 kN/m2 Ultimate load, n = 9.24 kN/m2

Slab material
Concrete characteristic strength = 25 N/mm2
Steel characteristic strength = 485 N/mm2

Slab edges continuity


(1 continuous / 0 discontinuous)
edge 1
Edge Continuity edge 2

Edge 1 0
Edge 2 1
Edge 3 1 edge 3
Edge 4 0 edge 4

Ultimate moment
Bx = moment coefficient for sagging moment in direction of L x
B2 & B3 = moment coefficient for hogging moment over edge 2 & 3

Moment in x direction
------------- ------------- -------------
Bx = 0.063 Mx = 20.96 kNm/m width
B2 = 0.086 M2 = 28.61 kNm/m width
B3 = 0.086 M3 = 28.61 kNm/m width

'file:///conversion/tmp/activity_task_scratch/614667949.xlsx'#$SLAB ONE-WAY - BRC


CALCULATION SHEET
KESHMEN CONSULT SDN BHD SHEET____2__ OF ______
CIVIL & STRUCTURAL CONSULTING ENGINEERS
12A-3 Jalan PJS 11/28, Bandar Sunway, 46150 Petaling Jaya, Selangor Designed by Date
Tel: (03) 56323750, (03) 56341572 Fax: (03) 56340356 0 12/30/1899
PROJECT 0 Checked by Job No
0 0

Wire-mesh reinforcement
Reinforcement in x direction Ultimate moment (kNm/m width)
------------- ------------- ------------- ------------- %As Design Resist. Extra Status
Bottom bar : A10 0.196 20.96 26.76 5.80 O.K
Top bar edge 2 : A10 0.196 28.61 26.76 -1.85 fail
Top bar edge 3 : A10 0.196 28.61 26.76 -1.85 fail

Reinforcement in y direction Maximum spacing (mm)


------------- ------------- ------------- ------------- %As Max Actual Status
Top & Bottom bar : A10 0.196 510 200 O.K

Ultimate shear
Shear in x direction Ultimate shear (kN/m width)
------------- ------------- ------ Design Resist. Extra Status
Edge 2 : 27.72 81.65 53.93 O.K
Edge 3 : 27.72 81.65 53.93 O.K

Deflection
Mx/bdx2 = 0.73
As, req = 308 mm2
As, prov = 393 mm2
fs = 237 N/mm2
Tension reinforcement modification factor = 1.78
Basic Lx/dx = 26
Allowable Lx/dx = 46.25
Actual Lx/dx = 35.29 Deflection O.K

'file:///conversion/tmp/activity_task_scratch/614667949.xlsx'#$SLAB ONE-WAY - BRC


8 Additional reinforcement for brickwall
-------------- --------------- -------------- -------------- -------------- -------------- -------------- --------------
Thickness of brickwall = 230
Height of brickwall = 3.20
Unit weight of brickwall = 4.86
Total weight of brickwall = 15.6
Weight of concrete strip below brickwall = 1.1
Total load on concrete strip, W = 16.7

Partial factor of safety for DL = 1.4


Design load, F = 23.3

Ultimate moment, M = 17.5


Ultimate shear, V = 11.7

Diameter of tension steel bar = 16


Diameter of compression steel bar = 12
Effective depth to tension steel, d = 167.0
Effective depth to compression steel, d' = 31.0
M/bd2fcu ratio, K = 0.109
Lever arm, z = 143.4
Area of compression reinforcement, A s.comp = 0
Nos. of steel bars required = 0.00
Nos. of steel bars provided = 4
Area of tension reinforcement, A s.tens = 289
Nos. of steel bars required = 1.44
Nos. of steel bars provided = 4
100As.tens/bd = 2.09

Depth to neutral axis, x = 52.4


d'/x ratio = 0.59
Design stress of reinforcement = 306.4

Allowable shear stress, vc = 1.01


Ultimate shear stress, v = 0.30
|::

-------------- --------------- -------------- -------------- -------------- -------------- -------------- --------------


RC slab design table using BRC - Top bar
-------------- --------------- -------------- -------------- -------------- -------------- -------------- --------------
Concrete characteristic strength : 25 N/mm2
Bar characteristic strength : 485 N/mm2
Slab overall thickness : 200 mm
Top cover to reinforcement : 25 mm
Bottom cover to reinforcement : 25 mm

-------------- --------------- -------------- -------------- -------------- -------------- -------------- --------------


Bar ref Bar S Ax dx dy zx zy
dia (mm) (mm ) 2
(mm) (mm) (mm) (mm)
-------------- --------------- -------------- -------------- -------------- -------------- -------------- --------------
A10 10 200 392.7 170.0 160.0 161.5 152.0
A9 9 200 318.1 170.5 161.5 162.0 153.4
A8 8 200 251.3 171.0 163.0 162.5 154.9
A7 7 200 192.4 171.5 164.5 162.9 156.3
A6.5 6.5 200 165.9 171.8 165.3 163.2 157.0
A6 6 200 141.4 172.0 166.0 163.4 157.7
A5 5 200 98.2 172.5 167.5 163.9 159.1
A4 4 200 62.8 173.0 169.0 164.4 160.6
A3 3 200 35.3 173.5 170.5 164.8 162.0

B12-M 12 100 1131.0 169.0 157.0 147.8 135.8


B10-M 10 100 785.4 170.0 160.0 155.3 145.3
B9-M 9 100 636.2 170.5 161.5 158.6 149.6
B8-M 8 100 502.7 171.0 163.0 161.6 153.6
B7-M 7 100 384.8 171.5 164.5 162.9 156.3
B6-M 6 100 282.7 172.0 166.0 163.4 157.7
B5-M 5 100 196.3 172.5 167.5 163.9 159.1
B4-M 4 100 125.7 173.0 169.0 164.4 160.6
B3-M 3 100 70.7 173.5 170.5 164.8 162.0

B12-C 8 200 251.3 171.0 163.0 162.5 154.9


B10-C 8 200 251.3 171.0 163.0 162.5 154.9
B9-C 8 200 251.3 171.0 163.0 162.5 154.9
B8-C 8 200 251.3 171.0 163.0 162.5 154.9
B7-C 7 200 192.4 171.5 164.5 162.9 156.3
B6-C 7 200 192.4 171.5 164.5 162.9 156.3
B5-C 7 200 192.4 171.5 164.5 162.9 156.3
B4-C 7 200 192.4 171.5 164.5 162.9 156.3
B3-C 7 200 192.4 171.5 164.5 162.9 156.3
-------------- --------------- -------------- -------------- -------------- -------------- -------------- --------------
|::
-------------- --------------- -------------- -------------- -------------- -------------- -------------- --------------
RC slab design table using BRC - Bottom BRC
-------------- --------------- -------------- -------------- -------------- -------------- -------------- --------------
Concrete characteristic strength : 25 N/mm2
Bar characteristic strength : 485 N/mm2
Slab overall thickness : 200 mm

-------------- --------------- -------------- -------------- -------------- -------------- -------------- --------------


Bar ref Bar S Ax dx dy zx zy
dia (mm) (mm ) 2
(mm) (mm) (mm) (mm)
-------------- --------------- -------------- -------------- -------------- -------------- -------------- --------------
A10 10 200 392.7 170.0 160.0 161.5 152.0
A9 9 200 318.1 170.5 161.5 162.0 153.4
A8 8 200 251.3 171.0 163.0 162.5 154.9
A7 7 200 192.4 171.5 164.5 162.9 156.3
A6.5 6.5 200 165.9 171.8 165.3 163.2 157.0
A6 6 200 141.4 172.0 166.0 163.4 157.7
A5 5 200 98.2 172.5 167.5 163.9 159.1
A4 4 200 62.8 173.0 169.0 164.4 160.6
A3 3 200 35.3 173.5 170.5 164.8 162.0

B12-M 12 100 1131.0 169.0 157.0 147.8 135.8


B10-M 10 100 785.4 170.0 160.0 155.3 145.3
B9-M 9 100 636.2 170.5 161.5 158.6 149.6
B8-M 8 100 502.7 171.0 163.0 161.6 153.6
B7-M 7 100 384.8 171.5 164.5 162.9 156.3
B6-M 6 100 282.7 172.0 166.0 163.4 157.7
B5-M 5 100 196.3 172.5 167.5 163.9 159.1
B4-M 4 100 125.7 173.0 169.0 164.4 160.6
B3-M 3 100 70.7 173.5 170.5 164.8 162.0

B12-C 8 200 251.3 171.0 163.0 162.5 154.9


B10-C 8 200 251.3 171.0 163.0 162.5 154.9
B9-C 8 200 251.3 171.0 163.0 162.5 154.9
B8-C 8 200 251.3 171.0 163.0 162.5 154.9
B7-C 7 200 192.4 171.5 164.5 162.9 156.3
B6-C 7 200 192.4 171.5 164.5 162.9 156.3
B5-C 7 200 192.4 171.5 164.5 162.9 156.3
B4-C 7 200 192.4 171.5 164.5 162.9 156.3
B3-C 7 200 192.4 171.5 164.5 162.9 156.3
-------------- --------------- -------------- -------------- -------------- -------------- -------------- --------------
--------------
mm
m
kN/m2
KN/m
KN/m
KN/m

KN

KNm
KN

mm
mm
mm
mm

mm
mm2
Nos.
Nos. O.K.
mm2
Nos.
Nos. O.K.
%

mm
> 0.43
< 0.87fy

N/mm2
N/mm2 < vc O.K.

-------------- -------------- --------------- -------------- ----

-------------- -------------- --------------- -------------- ----

-------------- -------------- --------------- -------------- --------------


Mx My vcx Vx As
(kNm) (kNm) (N/mm ) 2
(kN) (%)
-------------- -------------- --------------- -------------- --------------
26.76 25.19 0.48 81.65 0.20
21.74 20.59 0.45 76.20 0.16
17.23 16.42 0.41 70.53 0.13
13.23 12.69 0.38 64.60 0.10
11.42 10.99 0.36 61.53 0.08
9.75 9.41 0.34 58.37 0.07
6.79 6.59 0.30 51.75 0.05
4.36 4.26 0.26 44.65 0.03
2.46 2.42 0.21 36.90 0.02

70.53 64.80 0.69 115.88 0.57


51.46 48.14 0.61 102.87 0.39
42.57 40.15 0.56 96.01 0.32
34.27 32.57 0.52 88.87 0.25
26.46 25.38 0.47 81.40 0.19
19.49 18.81 0.43 73.54 0.14
13.58 13.18 0.38 65.20 0.10
8.71 8.51 0.33 56.25 0.06
4.92 4.83 0.27 46.49 0.04

17.23 16.42 0.41 70.53 0.13


17.23 16.42 0.41 70.53 0.13
17.23 16.42 0.41 70.53 0.13
17.23 16.42 0.41 70.53 0.13
13.23 12.69 0.38 64.60 0.10
13.23 12.69 0.38 64.60 0.10
13.23 12.69 0.38 64.60 0.10
13.23 12.69 0.38 64.60 0.10
13.23 12.69 0.38 64.60 0.10
-------------- -------------- --------------- -------------- --------------

-------------- -------------- --------------- -------------- --------------

-------------- -------------- --------------- -------------- ----

-------------- -------------- --------------- -------------- --------------


Mx My vcx Vx As
(kNm) (kNm) (N/mm ) 2
(kN) (%)
-------------- -------------- --------------- -------------- --------------
26.76 25.19 0.48 81.65 0.20
21.74 20.59 0.45 76.20 0.16
17.23 16.42 0.41 70.53 0.13
13.23 12.69 0.38 64.60 0.10
11.42 10.99 0.36 61.53 0.08
9.75 9.41 0.34 58.37 0.07
6.79 6.59 0.30 51.75 0.05
4.36 4.26 0.26 44.65 0.03
2.46 2.42 0.21 36.90 0.02

70.53 64.80 0.69 115.88 0.57


51.46 48.14 0.61 102.87 0.39
42.57 40.15 0.56 96.01 0.32
34.27 32.57 0.52 88.87 0.25
26.46 25.38 0.47 81.40 0.19
19.49 18.81 0.43 73.54 0.14
13.58 13.18 0.38 65.20 0.10
8.71 8.51 0.33 56.25 0.06
4.92 4.83 0.27 46.49 0.04

17.23 16.42 0.41 70.53 0.13


17.23 16.42 0.41 70.53 0.13
17.23 16.42 0.41 70.53 0.13
17.23 16.42 0.41 70.53 0.13
13.23 12.69 0.38 64.60 0.10
13.23 12.69 0.38 64.60 0.10
13.23 12.69 0.38 64.60 0.10
13.23 12.69 0.38 64.60 0.10
13.23 12.69 0.38 64.60 0.10
-------------- -------------- --------------- -------------- --------------
### CALCULATION SHEET
KESHMEN CONSULT SDN BHD SHEET____1__ OF ______
CIVIL & STRUCTURAL CONSULTING ENGINEERS
12A-3 Jalan PJS 11/28, Bandar Sunway, 46150 Petaling Jaya, Selangor Designed by Date
Tel: (03) 56323750, (03) 56341572 Fax: (03) 56340356
PROJECT Checked by Job No

Design of One-Way Reinforced Concrete Slab to BS8110 SLAB-1-B


Version No: 6.01.01
Identification :

Slab geometry
Width of slab, Lx = 6000 mm
Thickness of slab h = 200 mm B'wall weight = 0 kN/m2
Top cover to bar c = 25 mm
Bot. cover to bar c = 25 mm

Slab loading
Self weight = 4.80 kN/m2
Finishes = 2.40 kN/m2

Dead load Gk = 7.20 kN/m2


Live load Qk = 15.00 kN/m2 Ultimate load n = #N/A kN/m2

Slab material
Concrete characteristic strength = 30 N/mm2
Steel characteristic strength = 460 N/mm2

Slab edges continuity


(1 continuous / 0 discontinuous)
edge 1
Edge Continuity edge 2

Edge 1 0
Edge 2 1
Edge 3 1 edge 3
Edge 4 1 edge 4

Ultimate moment
Bx = moment coefficient for sagging moment in direction of L x
B2 & B3 = moment coefficient for hogging moment over edge 2 & 3

Moment in x direction
------------- ------------- -------------
Bx = 0.063 Mx = #N/A kNm/m width
B2 = 0.086 M2 = #N/A kNm/m width
B3 = 0.063 M3 = #N/A kNm/m width

'file:///conversion/tmp/activity_task_scratch/614667949.xlsx'#$SLAB ONE-WAY - T-BAR


CALCULATION SHEET
KESHMEN CONSULT SDN BHD SHEET____2__ OF ______
CIVIL & STRUCTURAL CONSULTING ENGINEERS
12A-3 Jalan PJS 11/28, Bandar Sunway, 46150 Petaling Jaya, Selangor Designed by Date
Tel: (03) 56323750, (03) 56341572 Fax: (03) 56340356 0 12/30/1899
PROJECT 0 Checked by Job No
0 0

Reinforcement Bar
Reinforcement in x direction Ultimate moment (kNm/m width)
------------- ------------- ------------- ------------- %As Design Resist. Extra Status
Bottom bar : T12-150 0.377 #N/A 47.62 #N/A #N/A
Top bar edge 2 : T16-175 0.574 #N/A 68.96 #N/A #N/A
Top bar edge 3 : T12-150 0.377 #N/A 47.62 #N/A #N/A

Reinforcement in y direction Maximum spacing (mm)


------------- ------------- ------------- ------------- %As Max Actual Status
Top : T10-175 0.224 510 175 O.K
Bottom : T10-175 0.224 510 175 O.K
β(Ratio of Moment Distribution) 1

Ultimate shear
Shear in x direction Ultimate shear (kN/m width)
------------- ------------- ------ Design Resist. Extra Status
Edge 2 : #N/A 123.17 #N/A #N/A
Edge 3 : #N/A 107.57 #N/A #N/A

Deflection
Mx/bdx2 = #N/A
As, req = #N/A mm2
As, prov = 754 mm2
fs = #N/A N/mm2
Tension reinforcement modification factor = #N/A
Basic Lx/dx = 26
Allowable Lx/dx = #N/A
Actual Lx/dx = 35.50 #N/A

'file:///conversion/tmp/activity_task_scratch/614667949.xlsx'#$SLAB ONE-WAY - T-BAR


8 Additional reinforcement for brickwall
-------------- --------------- -------------- -------------- -------------- -------------- -------------- --------------
Thickness of brickwall = 230
Height of brickwall = 3.20
Unit weight of brickwall = 4.86
Total weight of brickwall = 15.6
Weight of concrete strip below brickwall = 1.1
Total load on concrete strip, W = 16.7

Partial factor of safety for DL = 1.4


Design load, F = 23.3

Ultimate moment, M = 17.5


Ultimate shear, V = 11.7

Diameter of tension steel bar = 16


Diameter of compression steel bar = 12
Effective depth to tension steel, d = 167.0
Effective depth to compression steel, d' = 31.0
M/bd2fcu ratio, K = 0.091
Lever arm, z = 148.0
Area of compression reinforcement, A s.comp = 0
Nos. of steel bars required = 0.00
Nos. of steel bars provided = 4
Area of tension reinforcement, A s.tens = 295
Nos. of steel bars required = 1.47
Nos. of steel bars provided = 4
100As.tens/bd = 2.09

Depth to neutral axis, x = 42.3


d'/x ratio = 0.73
Design stress of reinforcement = 234.8

Allowable shear stress, vc = 1.10


Ultimate shear stress, v = 0.30
|::

-------------- --------------- -------------- -------------- -------------- -------------- -------------- --------------


RC slab design table using T-Bar - Top bar
-------------- --------------- -------------- -------------- -------------- -------------- -------------- --------------
Concrete characteristic strength : 30 N/mm2
Bar characteristic strength : 460 N/mm2
Slab overall thickness : 200 mm
Top cover to reinforcement : 25 mm
Bottom cover to reinforcement : 25 mm

-------------- --------------- -------------- -------------- -------------- -------------- -------------- --------------


Bar ref Bar S Ax dx dy zx zy
dia (mm) (mm ) 2
(mm) (mm) (mm) (mm)
-------------- --------------- -------------- -------------- -------------- -------------- -------------- --------------
T10-100 10 100 785.4 170.0 160.0 158.4 148.4
T10-125 10 125 628.3 170.0 160.0 160.7 150.7
T10-150 10 150 523.6 170.0 160.0 161.5 152.0
T10-175 10 175 448.8 170.0 160.0 161.5 152.0
T10-200 10 200 392.7 170.0 160.0 161.5 152.0
T10-250 10 250 314.2 170.0 160.0 161.5 152.0
T10-300 10 300 261.8 170.0 160.0 161.5 152.0

T12-100 12 100 1131.0 169.0 157.0 152.2 140.2


T12-125 12 125 904.8 169.0 157.0 155.6 143.6
T12-150 12 150 754.0 169.0 157.0 157.8 145.8
T12-175 12 175 646.3 169.0 157.0 159.4 147.4
T12-200 12 200 565.5 169.0 157.0 160.6 148.6
T12-250 12 250 452.4 169.0 157.0 160.6 149.2
T12-300 12 300 377.0 169.0 157.0 160.6 149.2

T16-100 16 100 2010.6 167.0 151.0 137.2 121.2


T16-125 16 125 1608.5 167.0 151.0 143.2 127.2
T16-150 16 150 1340.4 167.0 151.0 147.1 131.1
T16-175 16 175 1148.9 167.0 151.0 150.0 134.0
T16-200 16 200 1005.3 167.0 151.0 152.1 136.1
T16-250 16 250 804.2 167.0 151.0 155.1 139.1
T16-300 16 300 670.2 167.0 151.0 157.1 141.1

T20-100 20 100 3141.6 165.0 145.0 118.4 98.4


T20-125 20 125 2513.3 165.0 145.0 127.7 107.7
T20-150 20 150 2094.4 165.0 145.0 134.0 114.0
T20-175 20 175 1795.2 165.0 145.0 138.4 118.4
T20-200 20 200 1570.8 165.0 145.0 141.7 121.7
T20-250 20 250 1256.6 165.0 145.0 146.4 126.4
|:: T20-300 20 300 1047.2 165.0 145.0 149.5 129.5

T25-100 25 100 4908.7 162.5 137.5 89.7 64.7


T25-125 25 125 3927.0 162.5 137.5 104.3 79.3
T25-150 25 150 3272.5 162.5 137.5 114.0 89.0
T25-175 25 175 2805.0 162.5 137.5 120.9 95.9
T25-200 25 200 2454.4 162.5 137.5 126.1 101.1
T25-250 25 250 1963.5 162.5 137.5 133.4 108.4
T25-300 25 300 1636.2 162.5 137.5 138.2 113.2

-------------- --------------- -------------- -------------- -------------- -------------- -------------- --------------


RC slab design table using T-Bar - Bottom BRC
-------------- --------------- -------------- -------------- -------------- -------------- -------------- --------------
Concrete characteristic strength : 30 N/mm2
Bar characteristic strength : 460 N/mm2
Slab overall thickness : 200 mm

-------------- --------------- -------------- -------------- -------------- -------------- -------------- --------------


Bar ref Bar S Ax dx dy zx zy
dia (mm) (mm ) 2
(mm) (mm) (mm) (mm)
-------------- --------------- -------------- -------------- -------------- -------------- -------------- --------------
T10-100 10 100 785.4 170.0 160.0 158.4 148.4
T10-125 10 125 628.3 170.0 160.0 160.7 150.7
T10-150 10 150 523.6 170.0 160.0 161.5 152.0
T10-175 10 175 448.8 170.0 160.0 161.5 152.0
T10-200 10 200 392.7 170.0 160.0 161.5 152.0
T10-250 10 250 314.2 170.0 160.0 161.5 152.0
T10-300 10 300 261.8 170.0 160.0 161.5 152.0

T12-100 12 100 1131.0 169.0 157.0 152.2 140.2


T12-125 12 125 904.8 169.0 157.0 155.6 143.6
T12-150 12 150 754.0 169.0 157.0 157.8 145.8
T12-175 12 175 646.3 169.0 157.0 159.4 147.4
T12-200 12 200 565.5 169.0 157.0 160.6 148.6
T12-250 12 250 452.4 169.0 157.0 160.6 149.2
T12-300 12 300 377.0 169.0 157.0 160.6 149.2

T16-100 16 100 2010.6 167.0 151.0 137.2 121.2


T16-125 16 125 1608.5 167.0 151.0 143.2 127.2
T16-150 16 150 1340.4 167.0 151.0 147.1 131.1
T16-175 16 175 1148.9 167.0 151.0 150.0 134.0
T16-200 16 200 1005.3 167.0 151.0 152.1 136.1
T16-250 16 250 804.2 167.0 151.0 155.1 139.1
T16-300 16 300 670.2 167.0 151.0 157.1 141.1

T20-100 20 100 3141.6 165.0 145.0 118.4 98.4


T20-125 20 125 2513.3 165.0 145.0 127.7 107.7
T20-150 20 150 2094.4 165.0 145.0 134.0 114.0
T20-175 20 175 1795.2 165.0 145.0 138.4 118.4
T20-200 20 200 1570.8 165.0 145.0 141.7 121.7
T20-250 20 250 1256.6 165.0 145.0 146.4 126.4
T20-300 20 300 1047.2 165.0 145.0 149.5 129.5

T25-100 25 100 4908.7 162.5 137.5 89.7 64.7


T25-125 25 125 3927.0 162.5 137.5 104.3 79.3
T25-150 25 150 3272.5 162.5 137.5 114.0 89.0
T25-175 25 175 2805.0 162.5 137.5 120.9 95.9
T25-200 25 200 2454.4 162.5 137.5 126.1 101.1
T25-250 25 250 1963.5 162.5 137.5 133.4 108.4
T25-300 25 300 1636.2 162.5 137.5 138.2 113.2

-------------- --------------- -------------- -------------- -------------- -------------- -------------- --------------


--------------
mm
m
kN/m2
KN/m
KN/m
KN/m

KN

KNm
KN

mm
mm
mm
mm

mm
mm2
Nos.
Nos. O.K.
mm2
Nos.
Nos. O.K.
%

mm
> 0.43
< 0.87fy

N/mm2
N/mm2 < vc O.K.

-------------- -------------- --------------- -------------- ----

-------------- -------------- --------------- -------------- ----

-------------- -------------- --------------- -------------- --------------


Mx My vcx Vx As
(kNm) (kNm) (N/mm ) 2
(kN) (%)
-------------- -------------- --------------- -------------- --------------
49.77 46.63 0.64 109.31 0.39
40.41 37.89 0.60 101.48 0.31
33.84 31.85 0.56 95.49 0.26
29.01 27.30 0.53 90.71 0.22
25.38 23.89 0.51 86.76 0.20
20.30 19.11 0.47 80.54 0.16
16.92 15.93 0.45 75.79 0.13

68.90 63.47 0.73 123.14 0.57


56.34 51.99 0.68 114.31 0.45
47.62 44.00 0.64 107.57 0.38
41.23 38.13 0.60 102.18 0.32
36.33 33.63 0.58 97.74 0.28
29.07 27.00 0.54 90.73 0.23
24.22 22.50 0.51 85.38 0.19

110.40 97.52 0.89 148.43 1.01


92.15 81.85 0.83 137.79 0.80
78.93 70.34 0.78 129.67 0.67
68.96 61.60 0.74 123.17 0.57
61.19 54.76 0.71 117.81 0.50
49.91 44.76 0.65 109.37 0.40
42.13 37.84 0.62 102.92 0.34

148.90 123.76 1.04 171.38 1.57


128.49 108.37 0.96 159.10 1.26
112.28 95.52 0.91 149.71 1.05
99.43 85.06 0.86 142.22 0.90
89.09 76.52 0.82 136.02 0.79
73.61 63.55 0.77 126.27 0.63
62.64 54.26 0.72 118.83 0.52

176.30 127.18 1.21 197.15 2.45


163.91 124.62 1.13 183.44 1.96
149.29 116.55 1.06 172.63 1.64
135.74 107.68 1.01 163.98 1.40
123.88 99.32 0.97 156.84 1.23
104.82 85.18 0.90 145.60 0.98
90.53 74.16 0.84 137.01 0.82

-------------- -------------- --------------- -------------- --------------

-------------- -------------- --------------- -------------- --------------

-------------- -------------- --------------- -------------- --------------


Mx My vcx Vx As
(kNm) (kNm) (N/mm ) 2
(kN) (%)
-------------- -------------- --------------- -------------- --------------
49.77 46.63 0.64 109.31 0.39
40.41 37.89 0.60 101.48 0.31
33.84 31.85 0.56 95.49 0.26
29.01 27.30 0.53 90.71 0.22
25.38 23.89 0.51 86.76 0.20
20.30 19.11 0.47 80.54 0.16
16.92 15.93 0.45 75.79 0.13

68.90 63.47 0.73 123.14 0.57


56.34 51.99 0.68 114.31 0.45
47.62 44.00 0.64 107.57 0.38
41.23 38.13 0.60 102.18 0.32
36.33 33.63 0.58 97.74 0.28
29.07 27.00 0.54 90.73 0.23
24.22 22.50 0.51 85.38 0.19

110.40 97.52 0.89 148.43 1.01


92.15 81.85 0.83 137.79 0.80
78.93 70.34 0.78 129.67 0.67
68.96 61.60 0.74 123.17 0.57
61.19 54.76 0.71 117.81 0.50
49.91 44.76 0.65 109.37 0.40
42.13 37.84 0.62 102.92 0.34

148.90 123.76 1.04 171.38 1.57


128.49 108.37 0.96 159.10 1.26
112.28 95.52 0.91 149.71 1.05
99.43 85.06 0.86 142.22 0.90
89.09 76.52 0.82 136.02 0.79
73.61 63.55 0.77 126.27 0.63
62.64 54.26 0.72 118.83 0.52

176.30 127.18 1.21 197.15 2.45


163.91 124.62 1.13 183.44 1.96
149.29 116.55 1.06 172.63 1.64
135.74 107.68 1.01 163.98 1.40
123.88 99.32 0.97 156.84 1.23
104.82 85.18 0.90 145.60 0.98
90.53 74.16 0.84 137.01 0.82

-------------- -------------- --------------- -------------- --------------


### CALCULATION SHEET
KESHMEN CONSULT SDN BHD SHEET____1__ OF ______
CIVIL & STRUCTURAL CONSULTING ENGINEERS
12A-3 Jalan PJS 11/28, Bandar Sunway, 46150 Petaling Jaya, Selangor Designed by Date
Tel: (03) 56323750, (03) 56341572 Fax: (03) 56340356
PROJECT Checked by Job No

Design of Two-Way Reinforced Concrete Slab to BS 8110 SLAB-2-B


Version No: 6.02.01
Identification :

Slab Geometry
Width of slab, Lx = 3000 mm Ly/Lx = 1.00 (Two way slab)
Length of slab, Ly = 3000 mm
Thickness of slab h = 200 mm B'wall weight = 0 kN/m2
Top cover to bar c = 25 mm
Bot. cover to bar c = 25 mm

Slab Loading
Self weight = 4.80 kN/m2
Finishes = 22.00 kN/m2

Dead load Gk = 26.80 kN/m2


Live load Qk = 10.00 kN/m2 Ultimate load n = 53.52 kN/m2

Slab Material Properties


Concrete characteristic strength = 30 N/mm2
Steel characteristic strength = 485 N/mm2

Slab Continuity
(1 continuous / 0 discontinuous)
edge 3
Edge Continuity +-------- -------+
Edge 1 0 | Ly |
Edge 2 1 edge 1 | Lx | edge 2
Edge 3 0 | |
Edge 4 1 +-------- -------+
edge 4
Ultimate Moment
Bx = moment coefficient for sagging moment in direction of L x
By = moment coefficient for sagging moment in direction of L y
B1 & B2 = moment coefficient for hogging moment over edge 1 & 2
B3 & B4 = moment coefficient for hogging moment over edge 3 & 4

Moment in x direction
------------- ------------- -------------
Bx = 0.036 Mx = 17.14 kNm/m width
B3 = 0.000 M3 = 0.00 kNm/m width
B4 = 0.047 M4 = 22.85 kNm/m width

'file:///conversion/tmp/activity_task_scratch/614667949.xlsx'#$SLAB TWO-WAY - BRC


CALCULATION SHEET
KESHMEN CONSULT SDN BHD SHEET____2__ OF ______
CIVIL & STRUCTURAL CONSULTING ENGINEERS
12A-3 Jalan PJS 11/28, Bandar Sunway, 46150 Petaling Jaya, Selangor Designed by Date
Tel: (03) 56323750, (03) 56341572 Fax: (03) 56340356 0 12/30/1899
PROJECT 0 Checked by Job No
0 0

Moment in y direction
------------- ------------- -------------
By = 0.034 My = 16.38 kNm/m width
B1 = 0.000 M1 = 0.00 kNm/m width
B2 = 0.045 M2 = 21.84 kNm/m width

Wire Mesh Reinforcement


Reinforcement in x direction %As Ultimate moment (kNm/m width)
------------- ------------- ------------- ------------- Design Resist. Extra Status
Bottom bar : A10 0.196 17.14 26.76 9.62 O.K
Top bar edge 3 : A10 0.196 0.00 26.76 26.76 O.K
Top bar edge 4 : A10 0.196 22.85 26.76 3.91 O.K

Reinforcement in y direction Ultimate moment (kNm/m width)


------------- ------------- ------------- ------------- Design Resist. Extra Status
Bottom bar : A10 0.196 16.38 26.76 10.38 O.K
Top bar edge 1 : A10 0.196 0.00 26.76 26.76 O.K
Top bar edge 2 : A10 0.196 21.84 26.76 4.92 O.K

Ultimate Shear
Shear in x direction Ultimate shear (kN/m width)
------------- ------------- ------ Design Resist. Extra Status
Edge 3 : 72.66 92.20 19.53 O.K
Edge 4 : 87.90 92.20 4.30 O.K

Deflection
Mx/bdx2 = 0.59
As, req = 251 mm2
As, prov = 393 mm2
fs = 194 N/mm2
Tension reinforcement modification factor = 2.00

Basic Lx/dx = 26
Allowable Lx/dx = 52.00
Actual Lx/dx = 17.65 Deflection O.K

'file:///conversion/tmp/activity_task_scratch/614667949.xlsx'#$SLAB TWO-WAY - BRC


8 Additional reinforcement for brickwall
----------------- ----------------- ----------------------- -----------------
Thickness of brickwall =
Height of brickwall =
Unit weight of brickwall =
Total weight of brickwall =
Weight of concrete strip below brickwall =
Total load on concrete strip, W =

Partial factor of safety for DL =


Design load, F =

Ultimate moment, M =
Ultimate shear, V =

Diameter of tension steel bar =


Diameter of compression steel bar =
Effective depth to tension steel, d =
Effective depth to compression steel, d' =
M/bd2fcu ratio, K =
Lever arm, z =
Area of compression reinforcement, A s.comp =
Nos. of steel bars required =
Nos. of steel bars provided =
Area of tension reinforcement, A s.tens =
Nos. of steel bars required =
Nos. of steel bars provided =
100As.tens/bd =

Depth to neutral axis, x =


d'/x ratio =
Design stress of reinforcement =

Allowable shear stress, vc =


Ultimate shear stress, v =
|::

----------------- ----------------- ----------------------- -----------------


RC slab design table using BRC - Top BRC
----------------- ----------------- ----------------------- -----------------
Concrete characteristic strength :
Bar characteristic strength :
Slab overall thickness :
Top cover to reinforcement :
Bottom cover to reinforcement :

Nd = 2 ----------------- ----------------- ----------------------- -----------------


r = 0.227 Bar ref Bar S Ax
dia (mm) (mm2)
----------------- ----------------- ----------------------- -----------------
A10 10 200 392.7
A9 9 200 318.1
A8 8 200 251.3
A7 7 200 192.4
A6.5 6.5 200 165.9
A6 6 200 141.4
A5 5 200 98.2
A4 4 200 62.8
A3 3 200 35.3

B12-M 12 100 1131.0


B10-M 10 100 785.4
B9-M 9 100 636.2
B8-M 8 100 502.7
B7-M 7 100 384.8
B6-M 6 100 282.7
B5-M 5 100 196.3
B4-M 4 100 125.7
B3-M 3 100 70.7

B12-C 8 200 251.3


B10-C 8 200 251.3
B9-C 8 200 251.3
B8-C 8 200 251.3
B7-C 7 200 192.4
B6-C 7 200 192.4
B5-C 7 200 192.4
B4-C 7 200 192.4
B3-C 7 200 192.4
----------------- ----------------- ----------------------- -----------------
|::
----------------- ----------------- ----------------------- -----------------
RC slab design table using BRC - Bottom BRC
----------------- ----------------- ----------------------- -----------------
Concrete characteristic strength :
Bar characteristic strength :
Slab overall thickness :

----------------- ----------------- ----------------------- -----------------


Bar ref Bar S Ax
dia (mm) (mm2)
----------------- ----------------- ----------------------- -----------------
A10 10 200 392.7
A9 9 200 318.1
A8 8 200 251.3
A7 7 200 192.4
A6.5 6.5 200 165.9
A6 6 200 141.4
A5 5 200 98.2
A4 4 200 62.8
A3 3 200 35.3

B12-M 12 100 1131.0


B10-M 10 100 785.4
B9-M 9 100 636.2
B8-M 8 100 502.7
B7-M 7 100 384.8
B6-M 6 100 282.7
B5-M 5 100 196.3
B4-M 4 100 125.7
B3-M 3 100 70.7

B12-C 8 200 251.3


B10-C 8 200 251.3
B9-C 8 200 251.3
B8-C 8 200 251.3
B7-C 7 200 192.4
B6-C 7 200 192.4
B5-C 7 200 192.4
B4-C 7 200 192.4
B3-C 7 200 192.4
----------------- ----------------- ----------------------- -----------------
----------------- ------------------- ----------------- ----------------- -----------------
150 mm
4.10 m
2.63 kN/m2
10.8 KN/m
0.7 KN/m
11.5 KN/m

1.4
16.1 KN

6.0 KNm
8.1 KN

12 mm
10 mm
169.0 mm
30.0 mm
0.047
159.7 mm
0 mm2
0.00 Nos.
2 Nos. O.K.
90 mm2
0.79 Nos.
3 Nos. O.K.
1.34 %

20.8 mm
1.45 > 0.43
125.5 < 0.87fy

0.95 N/mm2
0.32 N/mm2 < vc O.K.

----------------- ------------------- ----------------- ----------------- ----------------- -------------- -------------- -------------- ----

----------------- ------------------- ----------------- ----------------- ----------------- -------------- -------------- -------------- ----


30 N/mm2
485 N/mm2
200 mm
25 mm
25 mm

----------------- ------------------- ----------------- ----------------- ----------------- -------------- -------------- -------------- --------------


dx dy zx zy Mx My vcx Vx As
(mm) (mm) (mm) (mm) (kNm) (kNm) (N/mm2) (kN) (%)
----------------- ------------------- ----------------- ----------------- ----------------- -------------- -------------- -------------- --------------
170.0 160.0 161.5 152.0 26.76 25.19 0.54 92.20 0.20
170.5 161.5 162.0 153.4 21.74 20.59 0.51 86.11 0.16
171.0 163.0 162.5 154.9 17.23 16.42 0.47 79.76 0.13
171.5 164.5 162.9 156.3 13.23 12.69 0.43 73.11 0.10
171.8 165.3 163.2 157.0 11.42 10.99 0.41 69.65 0.08
172.0 166.0 163.4 157.7 9.75 9.41 0.38 66.10 0.07
172.5 167.5 163.9 159.1 6.79 6.59 0.34 58.65 0.05
173.0 169.0 164.4 160.6 4.36 4.26 0.29 50.64 0.03
173.5 170.5 164.8 162.0 2.46 2.42 0.24 41.88 0.02

169.0 157.0 151.3 139.3 72.21 66.49 0.77 130.66 0.57


170.0 160.0 157.7 147.7 52.27 48.96 0.68 116.16 0.39
170.5 161.5 160.6 151.6 43.10 40.68 0.64 108.49 0.32
171.0 163.0 162.5 154.9 34.45 32.84 0.59 100.50 0.25
171.5 164.5 162.9 156.3 26.46 25.38 0.54 92.11 0.19
172.0 166.0 163.4 157.7 19.49 18.81 0.48 83.28 0.14
172.5 167.5 163.9 159.1 13.58 13.18 0.43 73.89 0.10
173.0 169.0 164.4 160.6 8.71 8.51 0.37 63.80 0.06
173.5 170.5 164.8 162.0 4.92 4.83 0.30 52.77 0.04

171.0 163.0 162.5 154.9 17.23 16.42 0.47 79.76 0.13


171.0 163.0 162.5 154.9 17.23 16.42 0.47 79.76 0.13
171.0 163.0 162.5 154.9 17.23 16.42 0.47 79.76 0.13
171.0 163.0 162.5 154.9 17.23 16.42 0.47 79.76 0.13
171.5 164.5 162.9 156.3 13.23 12.69 0.43 73.11 0.10
171.5 164.5 162.9 156.3 13.23 12.69 0.43 73.11 0.10
171.5 164.5 162.9 156.3 13.23 12.69 0.43 73.11 0.10
171.5 164.5 162.9 156.3 13.23 12.69 0.43 73.11 0.10
171.5 164.5 162.9 156.3 13.23 12.69 0.43 73.11 0.10
----------------- ------------------- ----------------- ----------------- ----------------- -------------- -------------- --------------

----------------- ------------------- ----------------- ----------------- ----------------- -------------- -------------- -------------- ----

----------------- ------------------- ----------------- ----------------- ----------------- -------------- -------------- -------------- ----


30 N/mm2
485 N/mm2
200 mm

----------------- ------------------- ----------------- ----------------- ----------------- -------------- -------------- -------------- --------------


dx dy zx zy Mx My vcx Vx As
(mm) (mm) (mm) (mm) (kNm) (kNm) (N/mm ) 2
(kN) (%)
----------------- ------------------- ----------------- ----------------- ----------------- -------------- -------------- -------------- --------------
170.0 160.0 161.5 152.0 26.76 25.19 0.54 92.20 0.20
170.5 161.5 162.0 153.4 21.74 20.59 0.51 86.11 0.16
171.0 163.0 162.5 154.9 17.23 16.42 0.47 79.76 0.13
171.5 164.5 162.9 156.3 13.23 12.69 0.43 73.11 0.10
171.8 165.3 163.2 157.0 11.42 10.99 0.41 69.65 0.08
172.0 166.0 163.4 157.7 9.75 9.41 0.38 66.10 0.07
172.5 167.5 163.9 159.1 6.79 6.59 0.34 58.65 0.05
173.0 169.0 164.4 160.6 4.36 4.26 0.29 50.64 0.03
173.5 170.5 164.8 162.0 2.46 2.42 0.24 41.88 0.02

169.0 157.0 151.3 139.3 72.21 66.49 0.77 130.66 0.57


170.0 160.0 157.7 147.7 52.27 48.96 0.68 116.16 0.39
170.5 161.5 160.6 151.6 43.10 40.68 0.64 108.49 0.32
171.0 163.0 162.5 154.9 34.45 32.84 0.59 100.50 0.25
171.5 164.5 162.9 156.3 26.46 25.38 0.54 92.11 0.19
172.0 166.0 163.4 157.7 19.49 18.81 0.48 83.28 0.14
172.5 167.5 163.9 159.1 13.58 13.18 0.43 73.89 0.10
173.0 169.0 164.4 160.6 8.71 8.51 0.37 63.80 0.06
173.5 170.5 164.8 162.0 4.92 4.83 0.30 52.77 0.04

171.0 163.0 162.5 154.9 17.23 16.42 0.47 79.76 0.13


171.0 163.0 162.5 154.9 17.23 16.42 0.47 79.76 0.13
171.0 163.0 162.5 154.9 17.23 16.42 0.47 79.76 0.13
171.0 163.0 162.5 154.9 17.23 16.42 0.47 79.76 0.13
171.5 164.5 162.9 156.3 13.23 12.69 0.43 73.11 0.10
171.5 164.5 162.9 156.3 13.23 12.69 0.43 73.11 0.10
171.5 164.5 162.9 156.3 13.23 12.69 0.43 73.11 0.10
171.5 164.5 162.9 156.3 13.23 12.69 0.43 73.11 0.10
171.5 164.5 162.9 156.3 13.23 12.69 0.43 73.11 0.10
----------------- ------------------- ----------------- ----------------- ----------------- -------------- -------------- --------------
--------------

--------------
12.60
9.00
7.10
5.40
4.70
4.00
2.90
1.90
1.10

21.60
16.10
12.60
10.70
8.20
6.75
5.50
3.60
3.10

12.60
9.00
7.10
5.40
4.70
4.00
2.90
1.90
1.10

21.60
16.10
12.60
10.70
8.20
6.75
5.50
3.60
3.10
CALCULATION SHEET
KESHMEN CONSULT SDN BHD SHEET____1__ OF ______
CIVIL & STRUCTURAL CONSULTING ENGINEERS
12A-3 Jalan PJS 11/28, Bandar Sunway, 46150 Petaling Jaya, Selangor Designed by Date
Tel: (03) 56323750, (03) 56341572 Fax: (03) 56340356 Tiong 4/17/2020
PROJECT Ajinomoto -OFCF - Pit Tank Checked by Job No
1902

Design of Two-Way Reinforced Concrete Slab to BS 8110 SLAB-2-B


Version No: 6.02.01
Identification :

Slab Geometry
Width of slab, Lx = 3000 mm Ly/Lx = 1.00 (Two way slab)
Length of slab, Ly = 3000 mm
Thickness of slab h = 200 mm B'wall weight = 0 kN/m2
Top cover to bar c = 25 mm
Bot. cover to bar c = 25 mm

Slab Loading
Self weight = 4.80 kN/m2
Finishes = 1.20 kN/m2

Dead load Gk = 6.00 kN/m2


Live load Qk = 5.00 kN/m2 Ultimate load n = 16.40 kN/m2

Slab Material Properties


Concrete characteristic strength = 30 N/mm2
Steel characteristic strength = 460 N/mm2

Slab Continuity
(1 continuous / 0 discontinuous)
edge 3
Edge Continuity +-------- -------+
Edge 1 0 | Ly |
Edge 2 1 edge 1 | Lx | edge 2
Edge 3 0 | |
Edge 4 1 +-------- -------+
edge 4
Ultimate Moment
Bx = moment coefficient for sagging moment in direction of L x
By = moment coefficient for sagging moment in direction of L y
B1 & B2 = moment coefficient for hogging moment over edge 1 & 2
B3 & B4 = moment coefficient for hogging moment over edge 3 & 4

Moment in x direction
------------- ------------- -------------
Bx = 0.036 Mx = 5.25 kNm/m width
B3 = 0.000 M3 = 0.00 kNm/m width
B4 = 0.047 M4 = 7.00 kNm/m width

'file:///conversion/tmp/activity_task_scratch/614667949.xlsx'#$SLAB TWO-WAY - T-Bar


CALCULATION SHEET
KESHMEN CONSULT SDN BHD SHEET____2__ OF ______
CIVIL & STRUCTURAL CONSULTING ENGINEERS
12A-3 Jalan PJS 11/28, Bandar Sunway, 46150 Petaling Jaya, Selangor Designed by Date
Tel: (03) 56323750, (03) 56341572 Fax: (03) 56340356 Tiong 4/17/2020
PROJECT Ajinomoto -OFCF - Pit Tank Checked by Job No
0 1902

Moment in y direction
------------- ------------- -------------
By = 0.034 My = 5.02 kNm/m width
B1 = 0.000 M1 = 0.00 kNm/m width
B2 = 0.045 M2 = 6.69 kNm/m width

Wire Mesh Reinforcement


Reinforcement in x direction %As Ultimate moment (kNm/m width)
------------- ------------- ------------- ------------- Design Resist. Extra Status
Bottom bar : T12-150 0.377 5.25 47.62 42.37 O.K
Top bar edge 3 : T10-300 0.131 0.00 16.92 16.92 O.K
Top bar edge 4 : T10-300 0.131 7.00 16.92 9.92 O.K

Reinforcement in y direction Ultimate moment (kNm/m width)


------------- ------------- ------------- ------------- Design Resist. Extra Status
Bottom bar : T12-200 0.283 5.02 33.63 28.62 O.K
Top bar edge 1 : T10-300 0.131 0.00 15.93 15.93 O.K
Top bar edge 2 : T10-300 0.131 6.69 15.93 9.23 O.K

Ultimate Shear
Shear in x direction Ultimate shear (kN/m width)
------------- ------------- ------ Design Resist. Extra Status
Edge 3 : 22.27 75.79 53.53 O.K
Edge 4 : 26.93 75.79 48.86 O.K

Deflection
Mx/bdx2 = 0.18
As, req = 83 mm2
As, prov = 754 mm2
fs = 32 N/mm2
Tension reinforcement modification factor = 2.00

Basic Lx/dx = 26
Allowable Lx/dx = 52.00
Actual Lx/dx = 17.75 Deflection O.K

'file:///conversion/tmp/activity_task_scratch/614667949.xlsx'#$SLAB TWO-WAY - T-Bar


8 Additional reinforcement for brickwall
-------------- --------------- -------------- -------------- -------------- -------------- --------------
Thickness of brickwall =
Height of brickwall =
Unit weight of brickwall =
Total weight of brickwall =
Weight of concrete strip below brickwall =
Total load on concrete strip, W =

Partial factor of safety for DL =


Design load, F =

Ultimate moment, M =
Ultimate shear, V =

Diameter of tension steel bar =


Diameter of compression steel bar =
Effective depth to tension steel, d =
Effective depth to compression steel, d' =
M/bd2fcu ratio, K =
Lever arm, z =
Area of compression reinforcement, A s.comp =
Nos. of steel bars required =
Nos. of steel bars provided =
Area of tension reinforcement, A s.tens =
Nos. of steel bars required =
Nos. of steel bars provided =
100As.tens/bd =

Depth to neutral axis, x =


d'/x ratio =
Design stress of reinforcement =

Allowable shear stress, vc =


Ultimate shear stress, v =
|::

-------------- --------------- -------------- -------------- -------------- -------------- --------------


RC slab design table using T-Bar - Top bar
-------------- --------------- -------------- -------------- -------------- -------------- --------------
Concrete characteristic strength : 30 N/mm2
Bar characteristic strength : 460 N/mm2
Slab overall thickness : 200 mm
Top cover to reinforcement : 25 mm
Bottom cover to reinforcement : 25 mm

-------------- --------------- -------------- -------------- -------------- -------------- --------------


Nd = 2 Bar ref Bar S Ax dx dy zx
r = 0.227 dia (mm) (mm2) (mm) (mm) (mm)
-------------- --------------- -------------- -------------- -------------- -------------- --------------
T10-100 10 100 785.4 170.0 160.0 158.4
T10-125 10 125 628.3 170.0 160.0 160.7
T10-150 10 150 523.6 170.0 160.0 161.5
T10-175 10 175 448.8 170.0 160.0 161.5
T10-200 10 200 392.7 170.0 160.0 161.5
T10-250 10 250 314.2 170.0 160.0 161.5
T10-300 10 300 261.8 170.0 160.0 161.5

T12-100 12 100 1131.0 169.0 157.0 152.2


T12-125 12 125 904.8 169.0 157.0 155.6
T12-150 12 150 754.0 169.0 157.0 157.8
T12-175 12 175 646.3 169.0 157.0 159.4
T12-200 12 200 565.5 169.0 157.0 160.6
T12-250 12 250 452.4 169.0 157.0 160.6
T12-300 12 300 377.0 169.0 157.0 160.6

T16-100 16 100 2010.6 167.0 151.0 137.2


T16-125 16 125 1608.5 167.0 151.0 143.2
T16-150 16 150 1340.4 167.0 151.0 147.1
T16-175 16 175 1148.9 167.0 151.0 150.0
T16-200 16 200 1005.3 167.0 151.0 152.1
T16-250 16 250 804.2 167.0 151.0 155.1
T16-300 16 300 670.2 167.0 151.0 157.1

T20-100 20 100 3141.6 165.0 145.0 118.4


T20-125 20 125 2513.3 165.0 145.0 127.7
T20-150 20 150 2094.4 165.0 145.0 134.0
T20-175 20 175 1795.2 165.0 145.0 138.4
T20-200 20 200 1570.8 165.0 145.0 141.7
T20-250 20 250 1256.6 165.0 145.0 146.4
|:: T20-300 20 300 1047.2 165.0 145.0 149.5

T25-100 25 100 4908.7 162.5 137.5 89.7


T25-125 25 125 3927.0 162.5 137.5 104.3
T25-150 25 150 3272.5 162.5 137.5 114.0
T25-175 25 175 2805.0 162.5 137.5 120.9
T25-200 25 200 2454.4 162.5 137.5 126.1
T25-250 25 250 1963.5 162.5 137.5 133.4
T25-300 25 300 1636.2 162.5 137.5 138.2

-------------- --------------- -------------- -------------- -------------- -------------- --------------


RC slab design table using T-Bar - Bottom BRC
-------------- --------------- -------------- -------------- -------------- -------------- --------------
Concrete characteristic strength : 30 N/mm2
Bar characteristic strength : 460 N/mm2
Slab overall thickness : 200 mm

-------------- --------------- -------------- -------------- -------------- -------------- --------------


Bar ref Bar S Ax dx dy zx
dia (mm) (mm2) (mm) (mm) (mm)
-------------- --------------- -------------- -------------- -------------- -------------- --------------
T10-100 10 100 785.4 170.0 160.0 158.4
T10-125 10 125 628.3 170.0 160.0 160.7
T10-150 10 150 523.6 170.0 160.0 161.5
T10-175 10 175 448.8 170.0 160.0 161.5
T10-200 10 200 392.7 170.0 160.0 161.5
T10-250 10 250 314.2 170.0 160.0 161.5
T10-300 10 300 261.8 170.0 160.0 161.5

T12-100 12 100 1131.0 169.0 157.0 152.2


T12-125 12 125 904.8 169.0 157.0 155.6
T12-150 12 150 754.0 169.0 157.0 157.8
T12-175 12 175 646.3 169.0 157.0 159.4
T12-200 12 200 565.5 169.0 157.0 160.6
T12-250 12 250 452.4 169.0 157.0 160.6
T12-300 12 300 377.0 169.0 157.0 160.6

T16-100 16 100 2010.6 167.0 151.0 137.2


T16-125 16 125 1608.5 167.0 151.0 143.2
T16-150 16 150 1340.4 167.0 151.0 147.1
T16-175 16 175 1148.9 167.0 151.0 150.0
T16-200 16 200 1005.3 167.0 151.0 152.1
T16-250 16 250 804.2 167.0 151.0 155.1
T16-300 16 300 670.2 167.0 151.0 157.1

T20-100 20 100 3141.6 165.0 145.0 118.4


T20-125 20 125 2513.3 165.0 145.0 127.7
T20-150 20 150 2094.4 165.0 145.0 134.0
T20-175 20 175 1795.2 165.0 145.0 138.4
T20-200 20 200 1570.8 165.0 145.0 141.7
T20-250 20 250 1256.6 165.0 145.0 146.4
T20-300 20 300 1047.2 165.0 145.0 149.5

T25-100 25 100 4908.7 162.5 137.5 89.7


T25-125 25 125 3927.0 162.5 137.5 104.3
T25-150 25 150 3272.5 162.5 137.5 114.0
T25-175 25 175 2805.0 162.5 137.5 120.9
T25-200 25 200 2454.4 162.5 137.5 126.1
T25-250 25 250 1963.5 162.5 137.5 133.4
T25-300 25 300 1636.2 162.5 137.5 138.2

-------------- --------------- -------------- -------------- -------------- -------------- --------------


-------------- --------------
230 mm
3.20 m
4.86 kN/m2
15.6 KN/m
0.0 KN/m
15.6 KN/m

1.4
21.8 KN

8.2 KNm
10.9 KN

16 mm
12 mm
167.0 mm
31.0 mm
0.042
158.7 mm
70310 mm2
621.68 Nos.
4 Not O.K.
129 mm2
0.64 Nos.
4 Nos. O.K.
2.09 %

18.6 mm
1.67 > 0.43
6.7 < 0.87fy

1.10 N/mm2
0.28 N/mm2 < vc O.K.

-------------- --------------

-------------- --------------

-------------- -------------- -------------- -------------- -------------- --------------


zy Mx My vcx Vx As
(mm) (kNm) (kNm) (N/mm2) (kN) (%)
-------------- -------------- -------------- -------------- -------------- --------------
148.4 49.77 46.63 0.64 109.31 0.39
150.7 40.41 37.89 0.60 101.48 0.31
152.0 33.84 31.85 0.56 95.49 0.26
152.0 29.01 27.30 0.53 90.71 0.22
152.0 25.38 23.89 0.51 86.76 0.20
152.0 20.30 19.11 0.47 80.54 0.16
152.0 16.92 15.93 0.45 75.79 0.13

140.2 68.90 63.47 0.73 123.14 0.57


143.6 56.34 51.99 0.68 114.31 0.45
145.8 47.62 44.00 0.64 107.57 0.38
147.4 41.23 38.13 0.60 102.18 0.32
148.6 36.33 33.63 0.58 97.74 0.28
149.2 29.07 27.00 0.54 90.73 0.23
149.2 24.22 22.50 0.51 85.38 0.19

121.2 110.40 97.52 0.89 148.43 1.01


127.2 92.15 81.85 0.83 137.79 0.80
131.1 78.93 70.34 0.78 129.67 0.67
134.0 68.96 61.60 0.74 123.17 0.57
136.1 61.19 54.76 0.71 117.81 0.50
139.1 49.91 44.76 0.65 109.37 0.40
141.1 42.13 37.84 0.62 102.92 0.34
0.00
98.4 148.90 123.76 1.04 171.38 1.57
107.7 128.49 108.37 0.96 159.10 1.26
114.0 112.28 95.52 0.91 149.71 1.05
118.4 99.43 85.06 0.86 142.22 0.90
121.7 89.09 76.52 0.82 136.02 0.79
126.4 73.61 63.55 0.77 126.27 0.63
129.5 62.64 54.26 0.72 118.83 0.52

64.7 176.30 127.18 1.21 197.15 2.45


79.3 163.91 124.62 1.13 183.44 1.96
89.0 149.29 116.55 1.06 172.63 1.64
95.9 135.74 107.68 1.01 163.98 1.40
101.1 123.88 99.32 0.97 156.84 1.23
108.4 104.82 85.18 0.90 145.60 0.98
113.2 90.53 74.16 0.84 137.01 0.82

-------------- -------------- -------------- -------------- -------------- --------------

-------------- -------------- -------------- -------------- -------------- --------------

-------------- -------------- -------------- -------------- -------------- --------------


zy Mx My vcx Vx As
(mm) (kNm) (kNm) (N/mm2) (kN) (%)
-------------- -------------- -------------- -------------- -------------- --------------
148.4 49.77 46.63 0.64 109.31 0.39
150.7 40.41 37.89 0.60 101.48 0.31
152.0 33.84 31.85 0.56 95.49 0.26
152.0 29.01 27.30 0.53 90.71 0.22
152.0 25.38 23.89 0.51 86.76 0.20
152.0 20.30 19.11 0.47 80.54 0.16
152.0 16.92 15.93 0.45 75.79 0.13

140.2 68.90 63.47 0.73 123.14 0.57


143.6 56.34 51.99 0.68 114.31 0.45
145.8 47.62 44.00 0.64 107.57 0.38
147.4 41.23 38.13 0.60 102.18 0.32
148.6 36.33 33.63 0.58 97.74 0.28
149.2 29.07 27.00 0.54 90.73 0.23
149.2 24.22 22.50 0.51 85.38 0.19

121.2 110.40 97.52 0.89 148.43 1.01


127.2 92.15 81.85 0.83 137.79 0.80
131.1 78.93 70.34 0.78 129.67 0.67
134.0 68.96 61.60 0.74 123.17 0.57
136.1 61.19 54.76 0.71 117.81 0.50
139.1 49.91 44.76 0.65 109.37 0.40
141.1 42.13 37.84 0.62 102.92 0.34
0.00
98.4 148.90 123.76 1.04 171.38 1.57
107.7 128.49 108.37 0.96 159.10 1.26
114.0 112.28 95.52 0.91 149.71 1.05
118.4 99.43 85.06 0.86 142.22 0.90
121.7 89.09 76.52 0.82 136.02 0.79
126.4 73.61 63.55 0.77 126.27 0.63
129.5 62.64 54.26 0.72 118.83 0.52

64.7 176.30 127.18 1.21 197.15 2.45


79.3 163.91 124.62 1.13 183.44 1.96
89.0 149.29 116.55 1.06 172.63 1.64
95.9 135.74 107.68 1.01 163.98 1.40
101.1 123.88 99.32 0.97 156.84 1.23
108.4 104.82 85.18 0.90 145.60 0.98
113.2 90.53 74.16 0.84 137.01 0.82

-------------- -------------- -------------- -------------- -------------- --------------

You might also like