Manual EZCAP 295
Manual EZCAP 295
With this ezcap295 HD Video Capture Pro, you can capture up to 1080P video from HDMI ,Ypbpr
(component) or composite port, such as blue ray, set-top-box, computer, game box, VHS, etc. And
you can playback the record movie directly.
Ezcap295 has record and playback two function in one device, use remote controller to set to
playback mode. You can also set schedule recording, set recording quality, set split recording file or
not.
4. MIC IN—For connect a microphone and record voice comments when play game.
6. HDMI OUT—HDMI output, so can connect to monitor to pass through display the input video.
3. to
select the source.
4. Mute
5. Microphone mute
3, Use HDMI cable to connect HDMI video source, such as game player, set top box, etc.
5, The “LINE OUT” is for connect to speaker or earphone, it’s not necessary if you don’t need, cause
the HDMI output also with audio output.
6, You can connect your microphone to record your comment when play game, it’s not necessary only
if you need it.
Connect with Ypbpr component video source (such as DVD player, PS3. Etc):
1, Use the adapter cable in the package to connect component (red, blue, green), just don’t mixed the
red with the audio cable (the audio cable red and white will be separated with component)
1, Connect the composite (yellow cable and red white audio cable) to your video source with the
adapter cable come with the package.
2, The other connections are all same as HDMI input connections above.
Record:
When power on ezcap295, it will be at default mode—Recording mode, the green LED will be on.
After connection done as above, the monitor should show the input video. The screen will show
“No Signal” if there is no any video input.
To record video is very simple --- press the REC button (or “REC” on remote controller), then you
will see the indicator turns to red , you can also see “REC ACTIVE” words shows on monitor for a
short time. Press button again (or “STOP’ key on remote controller) to stop recording, the indicator
turns back to green, and “REC stop” words will show on monitor for a short time.use key to
adjust the audio volume
Use button of remote controller, you can get a still image by one press, but it is only
work when NOT recording.
Recording comments during video recording: If you connect a Microphone to MIC port, you can
record comments with video, you can adjust the microphone volume by key of remote
controller.
Use the 720P/1080P/PC keys of remote controller to adjust recording resolution. PC is for 1366 *
768 resolution.
Use the WATERMARK key of remote controller to add time watermark on display and recording
file. Press again to cancel time watermark.
There are several reasons for no actions when press record button, you may need check:
3, The format for USB flash is not suitable, e.g. exFAT. ezcap295 support FAT, FAT32, and NTFS.
5, The USB flash is not ready, normally, it will take 4~8 seconds after plug it on.
Schedule record:
Please set the SYSTEM TIME to the right local time before you set your schedule recording.
Press “SCH REC” of remote controller, can set the schedule recording:
After set the schedule time, please click “select” to display the task detail in task subject.
Note: please do not take the memory off when the indicator is flashing. The recording will
automatically stop if the USB flash out of space.
Sometimes you may find that some recorded video with problems, like: skip. It may caused by you
are using a USB flash on NTFS format, and you haven’t click “safety remove” the device when
disconnect from computer (especially for USB HDD, if not safety remove, may caused serious
problem). You can try to format it to FAT32 if that problem keeps happen.
Playback:
After recording, you may want to playback the recorded file. Just press the “PLAYBACK” key of
remote controller, you will see the playback page on your screen:
Choose MOVIE:
Use direction key of remote controller to choose movie then press playback the recorded
video, or photos if you want see the snapshot pictures.
You can press “DELETE” to delete the file you don’t need any more:
You can use to fast backward, fast forward, last,
pause/play, next operation as usual.
Other Settings:
Press “MENU” enter menu operations, press direction keys to choose the settings you need:
To set OSD Language
Picture mode:
Sound mode:
1, Update firmware for “record part”: Copy the firmware file (as jedi.img format) in to USB disk, power
off the device (unplug power jack), plug USB disk to device, power on, the red REC indicator will flash
7~8 seconds, it means the update is finished.
2, Update firmware for “ playback part”: copy the firmware file (as MERGE.bin format) to USB disk,
plug the disk to ezcap295, then press “MENU” of remote controller, use direction key, find following:
choose and press OK and LEFT direction key to update. Please pull power cable and push it to power
on again.
Specifications:
Connections
Digital: HDMI
Video Input
Analog: Component Video, Composite Video
Digital: HDMI
Audio Input
Analog: 3.5mm Microphone In. Analog L/R in
Video Output Digital: HDMI (Pass-through from HDMI or Component or Composite Input)
Hardware Extra
User Interface
LED indicator for working status.
infrared receiver
Weight 110g
Package Contents
Standards
Input / Pass-through:
720 x 480 (60p), 720 x 576 (50p), 1280 x 720p (50p), 1280 x 720p(60p), 1920 x 1080
(50i), 1920 x 1080 (60i), 1920 x 1080 (24p), 1920 x 1080 (25p), 1920 x 1080 (30p),
1920 x 1080 (50p), 1920 x 1080 (60p)
Resolution
Capture:
1280 x 720p(60p), 1366*768 (60p), 1920 x 1080 (30p)
Record Format Video: MP4, Audio: AAC Stereo
Record File Max: 2GB / Per File, With RTC (Real Time Clock)
高清视频采集专业版
使用说明
非常感谢您购买 ezcap295 高清视频采集专业版, 下述说明让你参考如何设定和使用该产品,并希望
该产品能够带给你良好体验。
产品外观、按键和接口:
1. PC/DC—5V 直流电源供电接口,还可以连接到电脑 USB 接
口通过软件采集视频。
3. AV / YPBPR—通过配备的转接线输入色差分量或 AV 视频信
号。
4. MIC IN—麦克风输入接口,实现麦克风与视频同时录制。
5. LINE OUT—音频线路输出接口,可连接耳机或音响系统等。
遥控器:
1. 开关键。 设备默认为电源开模式,在关闭电源并
重新启动后,设备会记忆关电之前的所有设定。
2. 抓图键,只有在不录制的状态下有效。
3. 选择输入视频源。
4 静音。
5. 麦克风静音。
6. 设定输出视频比例。
7. 开始录制和停止录制视频。
8. 菜单导航确认键,
左右键调节音量
上下键调节麦克风音量
MENU 为菜单键和返回
功能
EXIT 为退出功能
9. 按下显示当前时间水印并被记录于录制视频文 件,再次按下则没有时间水印。
11. 设定预约影。
12. 回放模式下的功能键。
“DELETE”可以删除选中
的文件。
13. 设定输出和录制的视频分辨率。
连接:
Ezcap295 有三种视频输入模式: HDMI, 色差分量和 AV(CVBS),设备可以自动识别输入的视频源。不
建议同时连接两种或三种视频源。
连接 HDMI 输入视频源:
1, 连接配备的电源至 PC/DC 接口。
6, 如果你需要录制麦克风与视频一起,则将麦克风连接至”MIC IN”接口,如果没有不要则无需连接。
录制采集:
ezcap295 高清视频采集专业版接上电源,设备会默认预览模式(录制模式),绿灯常亮。
录制视频非常简单 – 按下设备上的录制按键或遥控器上的录制按键,你将会看到指示灯变红,同
时显示屏左上角会出现一下红色的录制图标然后会消失,则表示设备在录制视频中。再次按下设备的录
制按键或遥控器的停止按键,则设备会停止录制,指示灯会闪烁几下并变为绿色常亮。
如果你连接了麦克风来录制评论,你还可以使用遥控器 上下键来调节麦克风音量大小。
因为一些原因可能会导致无法录制,你可以确认一下这些情形:
1, 没有连接好输入视频源。
2, U 盘没有足够容量。
4, U 盘没有连接好。
预约录影:
按下遥控器 “SCH REC” 键,可以设置预约录影。
设定好时间后,需要点击“select”来完成设置。
设定录制视频质量和是否分段:
按下遥控器的 “MENU” 菜单键进入如下菜单界面,按上下导航键选择需要设定的子菜单。
“Clock” 用于设定系统时间。
“REC SCHEDULE” 用于设定预约录影 (与之前预约录影的描述一致)。
“REC Video Quality” 用于设定录制视频质量,高表示 16Mbps, 中表示 10Mbps,低表示 4Mbps。
“RECORD_FILE” 用于设定录制的文件是否分割为每 1.95G 一个文件, 或者不分段仅仅一个文件。
SPLIT 表示录制文件会被分割,而 NO_SPLIT(NTFS) 表示不分段,不分段仅仅会 NTFS 格式的 U 盘
或移动硬盘有效。
回放:
录制后你或许想确认录制文件,请使用设备的回放功能。按下遥控器的“PLAYBACK” 键进入回放模式,
你将会在显示屏上看到如下回放页面。
你还可以使用 这些遥控器功能键来实现通常播放器的
快退、快进、上一个、播放/暂停、下一个这些常用功能。
其它设定:
按下遥控器的 “MENU” 键进入菜单操作,通过导航键来选择你需要设定的项目。
设定菜单语言。
图像模式。
声音模式。
固件程序和其它:
注意: 该设备包括两部分 – 录制部分 和 回放部分, 这两部分的固件程序升级是分开进行的。
规格参数:
接口界面
数字: HDMI
视频输入
模拟: 色差分量, AV 视频(CVBS)
数字: HDMI
音频输入
模拟: 3.5 毫米麦克风输入, 模拟 RCA 左右声道输入.
HDMI 工业高清相机,高清医疗内窥镜,高清机顶盒,游戏机等
色差分量 游戏机,机顶盒等
AV 视频(CVBS) 工业摄像机,医疗内窥镜等
硬件规格
录制按键
操作界面
工作状态指示灯
红外遥控器接收
重量 110 克
包装内容
设备 ezcap295 高清视频采集盒增强版
配件 5V 直流电源,遥控器,视频转接线,说明书,软件光盘
标准
U 盘,USB 移动硬盘
注: 不支持 exFAT 格式
输入:
720 x 480 (60p), 720 x 576 (50p), 1280 x 720p (50p), 1280 x 720p(60p), 1920 x 1080
分辨率
(50i), 1920 x 1080 (60i), 1920 x 1080 (24p), 1920 x 1080 (25p), 1920 x 1080 (30p),
1920 x 1080 (50p), 1920 x 1080 (60p)
采集 / 环出:
1280 x 720p(60p), 1366*768 (60p), 1920 x 1080 (30p)
电源适配器 迷你 USB 直流 5 伏 / 2 安