Scribd
Upload
59 views3 pages

Traverse Point Measurement

The document contains information about sampling points for ductwork of different diameters. It provides equations to calculate the number and location of sampling points along the diameter and perimeter of ducts for various traverses and duct sizes. For a duct with a diameter of 0.818m, the minimum number of sampling points ranges from 2-9 along the diameter and 5-17 across the perimeter depending on the traverse range.

Uploaded by

Dilnesa Ejigu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
59 views3 pages

Traverse Point Measurement

The document contains information about sampling points for ductwork of different diameters. It provides equations to calculate the number and location of sampling points along the diameter and perimeter of ducts for various traverses and duct sizes. For a duct with a diameter of 0.818m, the minimum number of sampling points ranges from 2-9 along the diameter and 5-17 across the perimeter depending on the traverse range.

Uploaded by

Dilnesa Ejigu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 3

no of points per traverse of 10 points per 8 points per 6 points

duct diameter D duct D duct D per duct D


1 0.0189 x D 0.0236 x D 0.0321 x D
2 0.0765 x D 0.1000 x D 0.1349 x D
3 0.1525 x D 0.1938 x D 0.3207 x D
4 0.2171 x D 0.3343 x D 0.6793 x D
5 0.3612 x D 0.6657 x D 0.8651 x D
6 0.6388 x D 0.8062 x D 0.9679 x D
7 0.7829 x D 0.9000 x D
8 0.8475 x D 0.9762 x D
9 0.9235 x D
10 0.9811 x D

For 0,8m of D
D= 0.818 m
no of points per traverse of 10 points per length from min. no. min. no. of sampling min. no. of sampling
duct diameter D duct D bottom of points per D points per plane
from to
1 0.0189 x D 0.015 sampling centre points centre points
0.063 lines
2 0.0765 x D incl excl incl excl
3 0.1525 x D 0.125
4 0.2171 x D 0.178 0.3 0.7 2 3 2 5 4
5 0.3612 x D 0.295 0.7 1 2 5 4 9 8
6 0.6388 x D 0.523 1 2 2 7 6 13 12
7 0.7829 x D 0.640 >2 2 9 8 17 16
8 0.8475 x D 0.693
9 0.9235 x D 0.755
10 0.9811 x D 0.803

Duct Diameter 81.8 cm


0.818 m
no of points per traverse of 10 points per 8 points per 6 points
duct diameter D duct D duct D per duct D
1 0.0189 x D 0.0236 x D 0.0321 x D
2 0.0765 x D 0.1000 x D 0.1349 x D
3 0.1525 x D 0.1938 x D 0.3207 x D
4 0.2171 x D 0.3343 x D 0.6793 x D
5 0.3612 x D 0.6657 x D 0.8651 x D
6 0.6388 x D 0.8062 x D 0.9679 x D
7 0.7829 x D 0.9000 x D
8 0.8475 x D 0.9762 x D
9 0.9235 x D
10 0.9811 x D

Keliling 255 cm
2.55 m
Diameter 0.812 m
no of points per traverse of 10 points per length from min. no. min. no. of sampling min. no. of sampling
duct diameter D duct D bottom of points per D points per plane
from to
1 0.0189 x D 0.015 sampling centre points centre points
0.062 lines
2 0.0765 x D incl excl incl excl
3 0.1525 x D 0.124
4 0.2171 x D 0.176 0.3 0.7 2 3 2 5 4
5 0.3612 x D 0.293 0.7 1 2 5 4 9 8
6 0.6388 x D 0.519 1 2 2 7 6 13 12
7 0.7829 x D 0.636 >2 2 9 8 17 16
8 0.8475 x D 0.688
9 0.9235 x D 0.750
10 0.9811 x D 0.797

Duct Diameter 81.8 cm


0.818 m
2162.25 cm2
0.216225 m2

You might also like