Ohmimetro MMR-640

Low Resistance Meter
MMR-640
index: WMGBMMR640
closed housing
open housing
Low resistance within range
Product features
• measurement of very low resistance

• high immunity to disturbances
• easy operation
• big touchscreen
• automatic measurement mode
• autoranging
Application
The MMR-640 meter is designed to measure very low resistance of resistive objects. This product is made to be used in
power plants, railways and maintenance companies to measure resistance of:
• breakers, contacts,
• earthing conductors, equipotential bondings,
• welded and soldered connections,
• bolted connections,
• and other resistive objects.
MMR-640 can be also utilized on production lines (eg. at the final production control stage).
page 1 / 4 sonel.pl/en
Device capabilities
The MMR-640 meter provides an innovative combination of a high-perfor-
mance measuring device with a modern user interface and advanced data
management system.
Durable and practical casing

In response to the customers needs the MMR-640 has been designed to oper-
ate in difficult environmental conditions. A unique casing with the IP67 ingress
protection rating ensures that the device is both waterproof and dustproof.
Easy readout
The MMR-640 meter is equipped with a readable colour touchscreen that, due
to its 800 x 480 pixel resolution, provides both high comfort of interacting with
the interface and high readability of the measurement results.
Possibility of setting limits Readable interface Extensive memory
Resistance measurement
Range Resolution Test current Accuracy
0…999.9 μΩ 0.1 μΩ
1.0000…1.9999 mΩ 0.0001 mΩ 10 A
2.000…19.999 mΩ 0.001 mΩ
20.00…199.99 mΩ 0.01 mΩ 10 A / 1 A
200.0…999.9 mΩ 0.1 mΩ ±(0.25% m.v. + 2 digits)
1 A / 0.1 A
1.0000…1.9999 Ω 0.0001 Ω
2.000…19.999 Ω 0.001 Ω 0.1 A
20.00…199.99 Ω 0.01 Ω 10 mA
200.0…1999.9 Ω 0.1 Ω 1 mA
„m.v.” - measured value.

Technical specification
insulation type according to EN 61010-1 double
measurement category acc. to EN 61010-2-030 III 600 V
with closed housing IP67
with open housing, powered from the

IP54
ingress protection according to EN 60529 battery pack, installed plugs
with open housing, powered from mains

P40
and/or without plugs
protection against external voltage up to 600 V AC for 10 s
90 V…265 V
power supply to battery charger 50 Hz…60 Hz
2A
battery charging time approximately 3.5 hours
number of measurements (of resistive objects) with

10 A current performed when powered from the 700…800 depending on the ambient temperature
battery pack
maximum wire resistance for 10 A current 300 mΩ
with selected resistive object type and

3s
bidirectional current flow
time of performing the resistance measurement with selected inductive object type,
dependent on the resistance and 5 s or more
inductance of the object
dimensions 318 x 257 x 152 mm
meter weight approx. 3.5 kg
operating temperature -10°C…+50°C
charger operating temperature 0°C…+45°C
storage temperature -20°C…+60°C
humidity 20%…90%
reference temperature +23°C ± 2°C
reference humidity 40%…60%
altitude (above sea level) <2000 m
temperature coefficient ±0.01% of d.v./°C ± 0.1 digit/°C
time to AUTO-OFF 5…45 minutes or option not active, depending on the setting
TFT graphic display 800 x 480 pixels
interface standard USB
quality standard design and manufacturing are ISO 9001 compliant
the product meets the EMC requirements

EN 61326-1 and EN 61326-2-2
(emission for industrial environment) according to
compliance with FCC Rules Class A digital device
“d.v.” - displayed value

Standard accessories
3 m double-
wire test lead
Kelvin croco-
L-11 carrying case
dile (2 pcs) U1/I1
WAPRZ003DZBBU1I1 WAFUTL11
WAKROKELK06
U2/I2
WAPRZ003DZBBU2I2
Li-Ion recharge- Mains cable - Calibration

able battery 7.2 V IEC C13 plug certificate
WAAKU27 WAPRZ1X8BLIEC LSWGBMMR640
Sonel Reader
USB cable
PC software
WAPRZUSB
WAPROREADER
Additional accessories
10 m / 15 m double-
wire test lead
Double pin Kelvin U1/I1 Kelvin clamp
probe (2 pcs.) WAPRZ010DZBBU1I1 with cables
WAPRZ015DZBBU1I1
WASONKEL20GB WAZACKEL1
U2/I2
WAPRZ010DZBBU2I2
WAPRZ015DZBBU2I2

Ohmimetro MMR-640

Uploaded by

Copyright:

Available Formats

Ohmimetro MMR-640

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Ohmimetro MMR-640

Uploaded by

Copyright:

Available Formats

Low Resistance Meter

Low resistance within range

• measurement of very low resistance

Durable and practical casing

Possibility of setting limits Readable interface Extensive memory

„m.v.” - measured value.

insulation type according to EN 61010-1 double

measurement category acc. to EN 61010-2-030 III 600 V

with closed housing IP67

with open housing, powered from the

with open housing, powered from mains

protection against external voltage up to 600 V AC for 10 s

battery charging time approximately 3.5 hours

number of measurements (of resistive objects) with

maximum wire resistance for 10 A current 300 mΩ

with selected resistive object type and

dimensions 318 x 257 x 152 mm

meter weight approx. 3.5 kg

operating temperature -10°C…+50°C

charger operating temperature 0°C…+45°C

storage temperature -20°C…+60°C

reference temperature +23°C ± 2°C

reference humidity 40%…60%

altitude (above sea level) <2000 m

temperature coefficient ±0.01% of d.v./°C ± 0.1 digit/°C

TFT graphic display 800 x 480 pixels

interface standard USB

quality standard design and manufacturing are ISO 9001 compliant

the product meets the EMC requirements

compliance with FCC Rules Class A digital device

“d.v.” - displayed value

Li-Ion recharge- Mains cable - Calibration

You might also like