Scribd Logo
Upload

Welcome to Scribd!

  • 78 views

    MSO - DS1000Z Upgrade Instructions

    Uploaded by

    tidh666
    This documentation provides guidance on upgrading MSO/DS1000Z series digital oscilloscopes to a new firmware version available for download. The upgrade process involves copying the firmware file to a USB flash drive, inserting it into the oscilloscope, and approving the upgrade when prompted which will install the new firmware and restart the instrument. A self-calibration is recommended after completion to ensure optimal performance.

    Copyright:

    © All Rights Reserved
    Download as TXT, PDF, TXT or read online from Scribd

    MSO - DS1000Z Upgrade Instructions

    Uploaded by

    tidh666
    78 views2 pages
    This documentation provides guidance on upgrading MSO/DS1000Z series digital oscilloscopes to a new firmware version available for download. The upgrade process involves copying the firmware file to a USB flash drive, inserting it into the oscilloscope, and approving the upgrade when prompted which will install the new firmware and restart the instrument. A self-calibration is recommended after completion to ensure optimal performance.

    Original Title

    MSO_DS1000Z Upgrade Instructions

    Copyright

    © © All Rights Reserved

    Available Formats

    TXT, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This documentation provides guidance on upgrading MSO/DS1000Z series digital oscilloscopes to a new firmware version available for download. The upgrade process involves copying the firmware file to a USB flash drive, inserting it into the oscilloscope, and approving the upgrade when prompted which will install the new firmware and restart the instrument. A self-calibration is recommended after completion to ensure optimal performance.

    Copyright:

    © All Rights Reserved
    Download as TXT, PDF, TXT or read online from Scribd
    Download as txt, pdf, or txt
    78 views2 pages

    MSO - DS1000Z Upgrade Instructions

    Uploaded by

    tidh666
    This documentation provides guidance on upgrading MSO/DS1000Z series digital oscilloscopes to a new firmware version available for download. The upgrade process involves copying the firmware file to a USB flash drive, inserting it into the oscilloscope, and approving the upgrade when prompted which will install the new firmware and restart the instrument. A self-calibration is recommended after completion to ensure optimal performance.

    Copyright:

    © All Rights Reserved
    Download as TXT, PDF, TXT or read online from Scribd
    Download as txt, pdf, or txt
    You are on page 1of 2

    This documentation is designed to provide guidance to customers on how to

    upgrade the MSO/DS1000Z series digital oscilloscope to the version in the


    "DS1000Z(ARM)update.rar" file.

    The applicable models include DS1XX4Z, DS1XX4Z Plus, DS1XX4Z-S Plus,


    MSO1XX4Z and MSO1XX4Z-S.

    New versions of firmware are available at the following website.


    http://int.rigol.com/Support/SoftDownload/3

    [Notices]

    - Before upgrading, please carefully refer to the


    "MSO_DS1000Z Release Notes.txt" file to obtain the updated information of
    the firmware version.

    - Please make sure your USB disk can be read correctly. MSO/DS1000Z series
    is required to use a USB Flash drive disk with FAT32 format.

    - During the upgrade process, please do not cut off power and pull out the
    USB disk, otherwise the instrument will fail to work normally.

    - MSO/DS1000Z series digital oscilloscope does not support the downgrading


    operations.

    [Upgrading Procedures]

    1. Copy the upgrade file DS1000ZUpdate.GEL to the root directory of the USB
    disk.

    2. Keep the instrument in the power-on state, then insert the USB disk into
    the USB HOST interface (next to the Power key).

    3. A prompt message is automatically displayed on the interface, reminding


    you that an upgrade file has been detected and ask you whether to upgrade
    it. You can click Ok to start to upgrade.

    4. During the upgrade, the instrument interface will display the current
    upgrade progress.

    5. When the interface displays "Upgrade finished!", restart the instrument.

    6. Check whether the firmware version number has been updated


    (press Utility -> System -> System Info).

    7. After upgrading has been completed, perform the self-calibration


    operation. Make sure that the instrument has been warmed up or has been
    operating for more than 30 minutes before the self-calibration.

    a. Disconnect all input channels;

    b. Press Utility -> Self-Cal, then click Start to perform the


    self-calibration.

    c. It takes about 30 minutes to perform the self-calibration.

    d. After the calibration has been completed, a prompt message will be


    displayed on the interface. Then, restart the instrument.
    [Troubleshooting]

    - If the instrument failed to read the upgrade file from the USB disk,
    please try to replace the USB disk.

    - If the problem still persists, please try to re-download the upgrade file.

    - If the problem still persists after performing the above two operations,
    please visit the website int.rigol.com to find contacts in your area.

    You might also like