Team Engineers

Solutions in Connectivity
An ISO 9001 : 2008 Company
TEAMLINK FABIO4CS
Integrated Access Multiplexer

FABIO4CS is a modular integrated Access TDM multiplexer with 512 x 512 cross connect ability, which integrates multiple
dedicated data, voice and LAN channels over multiple main (network) links. It can provide maximum 4E1 or 8E1 capacity for
accessing and transmission with cross-connect capacity is 512×512 64Kbps. It provides full range of voice and digital data services to
subscribers located at different locations require to interconnect and establish a voice and data network over E1 & STM1 links.

The flexible, 1U high, 19-inch, 5-slot modular FABIO4CS chassis with a wide choice of I/O (user interface) modules is designed
for applications ranging from small campus networks to multi-site corporate networks or extensive carrier access solutions.
Due to FABIO4C's standards adherence, central office based cross-connect units (DACS) can separate voice and data, sending
each to the appropriate carrier or service.

FABIO4CS enables carriers to successfully deploy bundled services and Internet access. The integration of a broad range of
services makes FABIO4CS a cost-effective access device, with reduced deployment and maintenance costs. The equipment
conforms to international standards, ensuring compatibility in multi-vendor environments worldwide.

FABIO4CS is designed to carry Various Original Equipment Manufacturer’s Digital Axle Circuits over optical fiber (STM).

Key Features
Compact 1U high, 19-inch chassis
Number of uplink-slots : 1
Number of service-slots : 4
Modular construction with four (4) slots for hot-swappable I/O modules
Max. E1 channels : 4 or 8E1 with (1+1) feature
Frame structure : Supports optional CRC-4 and PCM 30/31 settings.
Timing : Internal Crystal Oscillator clock, Clock received from any link (loopback)
Versatile 64Kbps User interface : Supports FXO/FXS Voice modules with caller number display, E&M 2/4-wire module with
adjustable voice gain, hotline with standard signaling tone and V.24/RS-232 low speed module
Max. FXO/FXS channels : 30 ~ 40
Max E&M channels : 24 ~ 32
Max V.35 channels : 3
Max FE channels : 3
Performance Monitor: EMS available to monitor the equipment & configure
Customer service can be allocated by on-line network operator.
Flexible network topologies : Point-to-Point , Daisy Chain.
Local and Remote Telnet support
STM1 | STM4 : uplink module available

TECHNICAL SPECIFICATIONS

FABIO-4C
I/O modules : 4E1, FXO, FXS, Hot-line, 2/4W E&M, RS232/V.24, ETH, 8E1, STM1, C37.94
Chassis(height) : 1U, 19-inch wide
Number of Service-slots : 4 slots for I/O modules
Telnet port : 10/100Mbps (RJ-45), Ethernet

Anchoring Next Generation Networks

Team Engineers
Solutions in Connectivity
An ISO 9001 : 2008 Company
TEAMLINK FABIO4CS
Integrated Access Multiplexer

Voice Interfaces
Channel sampling rate : 8 KHz
Companding law : A-law
Voice Interface : 2W, 4W, Signalling, FXO, FXS, E&M
Frequency : 300 to 3400 Hz
Impedance : 600 Ohms
Ring current voltage : 75 ± 15V AC, 25 ± 3 Hz

Data Interfaces
Low speed data interface : RS232, V.24
Characteristic : ITU-T V.24
Data Format : Asynchronous, Synchronous
Asynchronous data : upto 19.2 Kbps
Synchronous data : 64 Kbps ~ 128 Kbps

V35 Data Interface

Characteristic : ITU-T V.35
Bit Rate : N x 64 Kbps, N=1~31

Ethernet Data Interface

Characteristic : IEEE 802.3
Bit Rate : N x 64 Kbps, N=1~31

Uplink Interfaces(E1)
Supports 512×512 cross connect ability based on 64K with signaling
Bit rate : 2048 +/- 50 ppm
Code : HDB3
Impedance : 120 Ohms Balanced
Electrical characteristics : ITU-T G.703
Transfer characteristics : ITU-T G.823
Jitter performance : ITU-T G.823

STM UPLINK
STM : STM1 SNCP

Disaster Management Communication (IR)

FABIO series devices are suitable for disaster communication for extending various services to mid-section in Indian Railways

Power Supply
AC : 100V ~ 240V AC (220V nom) DC to AC adaptor and DC : -36V ~ -72V (nom : -48V DC)

Environment
Operating Temperature : -5 to +55°C
Operating Humidity : 5% to 99 %
Air pressure : 86 to 106 KPa

Anchoring Next Generation Networks

Team Engineers
Solutions in Connectivity
An ISO 9001 : 2008 Company
TEAMLINK FABIO4CS
Integrated Access Multiplexer

APPLICATION DIAGRAM

Ordering FABIO4CS

FABIO4CS PCM Multi Service Multiplexer chassis (1U-high) with 4 E1interface uplink (120 Ohms balance
FABIO/4CS/4E1/DC
RJ45 connector), 1Telnet port, 4 module slots, with one DC power supply
FABIO4CS PCM Multi Service Multiplexer chassis (1U-high) with 8 E1interface uplink (120 Ohms balance
FABIO/4CS/8E1/DC
RJ45 connector), 1Telnet port, 4 module slots, with one DC power supply
FABIO/4/M/10FXO Audio interface card for user, providing 10 FXO links per card
FABIO/4/M/10FXS Audio interface card for user, providing 10 FXS links per card
2/4 wire E&M trunk interface card, 8 interfaces per card, one SCIC female connector
FABIO/4/M/8E&M
Adapter cable :Voice cable ( CBL-VOICE-SCSI50M (40)/NC-3m )
FABIO/4/M/8RS232 RS232 interface card, providing 8 links RS-232 Asynchronous channels,RJ45 connector
FABIO/4/M/2FE High speed Ethernet interface card, providing two 10/100 Base-T Ethernet port, RJ45 connector
FABIO/STM1 STM1 module uplink supporting standard STM1 interface

Team Engineers Advance Technologies India (P).Ltd

Team Engineers Plot No. A-1/2/A, Industrial Park, Uppal,
Solutions in Connectivity Hyderabad - 39,Telangana(India)
An ISO 9001 : 2008 Company Phone : +91 -40-27204730 / 4873 / 4874,Fax : +91-40-27204731
e-mail : [email protected], www.teamengineers.in

Anchoring Next Generation Networks