METHOD STATEMENT FOR TERMITE

TREATMENT

PROPOSED CONSTRUCTION OF OFFICE AND

LEISURE DEVELOPMENT PROJECT LOCATED
AT NO 27, 27A, 27B GALLE FACE TERRACE,
COLOMBO 03.
 TABLE OF CONTENTS

1. INTRODUCTION .................................................................................................................2

2. OBJECTIVE ............................................................................................................................2

3. REFERENCES ..................................................................................................................... 2

4. TOOLS AND MATERIALS .............................................................................................. 2

5. PROCEDURE.........................................................................................................................2

5.1 Preliminary preparation ................................................................................................ 2

5.2 Treatment process ........................................................................................................... 3

6. POINTS TO BE CONSIDER BEFORE AND AFTER THE TREATMENT PROCESS .3

6.1 Prior to carrying out the treatment ensure the following ............................................. 3

6.2 After completion of the 1st stage and 2nd stage of termite treatment .......................... 3

7. QUALITY ASSURANCE AND QUALITY CHECK .......................................................4

8. SAFETY PLAN ......................................................................................................................5

8.1 Cause of Hazard and Control measure ....................................................................... 5

9. ATTACHMENT ....................................................................................................................6

 
1|P a ge
 1. INTRODUCTION

This method statement outline the proper termite treatment procedure around the
building perimeter. Anti-termite treatment is a process in which soil treatment is
applied to a building in the early stages of its construction. The purpose of anti-termite
treatment is to provide the building with a chemical barrier against the sub-terrain
termites. This activity should be performed with strict compliance and implementation
of safety requirements. And the termite treatment will be carried out by a specialized
sub-contractor Lankem Ceylon PLC.

2. OBJECTIVE

The objective of this method statement is to inform the consultants and the client, the
method and procedure that Sanken Construction (Pvt.) Ltd. shall follow for the termite
treatment work and to ensure all engineers and workers at site are following the well-
defined and safe methods and procedures.

3. REFERENCES

 Bill of Quantity
 Approved drawings for termite treatment
 Product data sheet of Bifenthrin (Alternate Commercial Name: Biflex 10 TC)
 Material Safety Data Sheet Bifenthrin

4. TOOLS AND MATERIALS

 Bifenthrin (Alternate Commercial Name: Biflex 10 TC)

 Power Sprayer

5. PROCEDURE

5.1 Preliminary preparation

Approved materials will be used for termite treatment. Before the treatment process,
soil should be in required level for concreting works because after the treatment
process cutting or filling will not be allowed. All the underground electrical cable and
water lines will be point-out before commencing this service. And water supply and
electricity should be supplied continuously for the termite treatment process.
 
2|P a ge
 

5.2 Treatment process

The chemical ( Biflex Bifenthrin 100g/l) will be used in treating the site. We recommend the use of Biflex
Bifenthrin for the following reasons:
 Kills almost all species of termites
 Gives long lasting protection from termites
 Used for Barrier treatment in Pre and Post Construction.
 Registered under pesticide act of Sri Lanka No.33 of 180
 Is a unique product recommended worldwide for the control of termites

The anti-termite treatment works will be carried out in two stages, as follows:

Stage One

Spray Treatment
 When the foundation is at the damp-proof course level and ready for floor
concreting, the entire soil area within the foundation will be treated with Bifenthrin
solution at the rate of 5 liters per square meter of soil area to create a horizontal
barrier.
Dilution rate – 1:200 liters of water

 Pressure impregnates Bifenthrin solution to the back filled soils to create a

vertical chemical barrier.
Dilution Rate – 1:200 liters of water

Inject Treatment (Backfilled area only)

 Pressure impregnates Biflex Bifenthrin solution to the back filled soils to create a vertical
chemical barrier. (The floor will be drilled 3 ft intervals right round the foundation up to 1 ft
depth)
Pressure –3 to 4 bars
Dilution Rate – 1:200 litres of water

Stage Two
 After landscaping is completed on the site, a chemical barrier will be created around the
building by injecting Bifenthrin solution at the rate of 5 liters per square meter of soil
area.
Dilution Rate – 1:200 liters of water (inject only)

3|P a ge
 
 

6. POINTS TO BE CONSIDER BEFORE AND AFTER THE TREATMENT

PROCESS

6.1 Prior to carrying out the treatment ensure the following

 All underground electric cables, water lines and/or any other cables and lines, of
whatsoever nature, are pointed out to our staff so as to ensure the safety of such
underground cabled and/or lines.
 Soil is free from any timber particles, large gravel etc.
 Soil is ready for concreting.
 Water and electricity is available at the site.

6.2 After completion of the 1st stage and 2nd stage of termite treatment

After completion of Stage 1 of the treatment please comply with the following in order to
ensure optimal protection:
 The concrete floor is completed soon after completion of the stage-1 and no later
than 48 hours from completion of Stage-1.
 All pens and/or wood panels are removed soon after levelling the concrete, and Stage-
2 is commenced within 6 months, at the latest, from the completion of Stage-1.

After completion of Stage 1 and/or Stage 2 please comply with the following in order to
ensure optimal performance of the chemical and optimal protection from the treatment:
 There is no soil disturbance of the treated area, whatsoever
 The soil type of the treated area is not altered in any manner whatsoever
 New soil is not introduced to the treated area
 The treated structure and/or the area is not modified, altered or otherwise
changed, and
 Reasonable measures are taken to eliminate faulty plumbing and/or leaks, dampness
and condensation from drains, gutters, toilets, down spouts, roofs, windows,
ceilings etc.

4|P a ge
 
 

7. QUALITY ASSURANCE AND QUALITY CHECK

For the purpose of quality controlling, the inspection will be carried out and maintain the
quality of construction work. Once the Contractors’ Engineer and the QA/QC Engineer
carried out the inspection, Engineers’ representative will carry out his inspection along
with the Contractors’ QA/QC Engineer and make the final approval to proceed the work.
inspection and monitoring will also be done to execute a safe work.

QA/QC inspection will be done under following criteria

 Required treatment area
 Mixing ratio
 Depth of treatment
 Interval of treatment

8. SAFETY PLAN

 All the people who are engaged with this work should wear Mask, gloves and PPE
 People, who are working with chemicals, should be a skilled person and should
inform to relevant parties before starting the work.
 Required area will be barricaded.
 Do not inject or spray the chemical directly to water, or to areas where surface water is
present.
 Do not use or store near heat or open flame.
 All people who are entering to the site premises should follow the safety rules and they
should aware the safety rules before entering the site.
 Safety officer will acknowledge all the people regarding the site safety. 5|P a ge
 
 

8.1 Cause of Hazard and Control measure Cause

of Hazards
 Unqualified workers
 Improper inspection of power tools before use
 Improper use of PPE
 Prolong exposure to chemicals

Control Measure
 Ensure all tools are checked for their good working condition prior to the start of the
job by operators.

 Ensure trained and experienced employees are assigned to the job.

 Ensure no defected/ handmade/ modified tools are available at site.
 Respiratory protection, and standard PPE’s to be worn at all the times.

Note: For additional details related to safety please refer ‘material safety data sheet of
Bifenthrin” attached with this document.

9. ATTACHMENT

 Product data sheet of Bifenthrin

 Material Safety data sheet of Bifenthrin

 Draft Warranty

6|P a ge
 
 Annexure 01
Product data sheet of Bifenthrin
 
 Annexure 02
Material Safety data sheet of Bifenthrin
 
 Material Safety Data Sheet
TalstarÒ 100 EC Insecticide

SDS # : 0681-A
Revision Date: 2012-04-04
Version 1

_____________________________________________________________________________________________

This MSDS has been prepared to meet U.S. OSHA Hazard Communication Standard 29 CFR 1910.1200
a
ndCa nada’sWor kplaceHa z
ardousMa ter
ial
sInformati
onSystem( WHMI S)r equir
eme nt
s.
_____________________________________________________________________________________________

1. PRODUCT AND COMPANY IDENTIFICATION

Product name TalstarÒ 100 EC Insecticide

Formula code 0681-A

Active Ingredient(s) Bifenthrin

Alternate Commercial Name Biflex® 10 TC; Brigata®; Talstar 10 EC; Talstar 100 EC; Brigada 100EC

Synonyms FMC 54800; (2-methyl[1,1'-biphenyl]-3-yl)methyl

3-(2-chloro-3,3,3-trifluoro-1-propenyl)-2,2-dimethylcyclopropanecarboxylate; IUPAC:
2-methylbiphenyl-3-ylmethyl
(Z)-(1RS)-cis-3-(2-chloro-3,3,3-trifluoroprop-1-enyl)-2,2-dimethylcyclopropanecarboxylate.

Chemical Family Pyrethroid Pesticide

Manufacturer Emergency telephone number

FMC Corporation
Agricultural Products Group Medical Emergencies:
1735 Market Street (800) 331-3148 (U.S.A. & Canada)
Philadelphia, PA 19103 +1 (651) 632-6793 (All Other Countries - Collect)
General Information: For leak, fire, spill or accident emergencies, call:
Phone: (215) 299-6000 +1 800 / 424 9300 (CHEMTREC - U.S.A.)
E-Mail: [email protected] +1 703 / 527 3887 (CHEMTREC - Collect - All Other Countries)

2. Hazards identification
Appearance light brown liquid

Physical state liquid

Odor aromatic

Physical or Chemical Hazards Keep away from heat, sparks, and open flame.

Flammable properties Combustible liquid

Potential health effects

Principle Routes of Exposure Eye contact, Skin contact, Inhalation, Ingestion.
Acute effects
Eyes Severely irritating (eyes).
Skin May cause sensitization by skin contact. Substance may cause slight skin irritation.
Inhalation May cause irritation of respiratory tract. May cause additional effects as listed under "Ingestion".

Page 1 / 9
TalstarÒ 100 EC Insecticide MSDS #: 0681-A
Revision Date: 2012-04-04
Version 1
Ingestion Harmful if swallowed. Potential for aspiration if swallowed. May cause central nervous system
depression. Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhea.
Chronic effects Repeated or prolonged exposure may cause central nervous system effects. Chronic exposure to
aromatic hydrocarbons may cause liver and kidney damage.

3. Composition/information on ingredients
Hazardous ingredients

Chemical Name CAS-No Weight %

Naphtha (petroleum), heavy aromatic 64742-94-5 80-90
Proprietary Material Proprietary <25
Bifenthrin 82657-04-3 11
Xylenes 1330-20-7 <2

4. First aid measures

Eye contact Hold eyes open and rinse slowly and gently with water for 15 to 20 minutes. Remove contact lenses,
if present, after the first 5 minutes, then continue rinsing eye. Call a poison control center or doctor
for further treatment advice.

Skin contact Take off contaminated clothing. Rinse skin immediately with plenty of water for 15-20 minutes.
Call a poison control center or doctor for treatment advice.

Inhalation Move person to fresh air. If person is not breathing, call 911 or an ambulance, then give artificial
respiration, preferably by mouth-to-mouth, if possible. Call a poison control center or doctor for
further treatment advice.

Ingestion Immediately call a poison control center or doctor. Do not induce vomiting unless told to do so by a
poison control center or doctor. Do not give any liquid to the person. Do not induce vomiting or give
anything by mouth to an unconscious person.

Notes to physician Contains petroleum distillate. Vomiting may cause aspiration pneumonia. This product is a
pyrethroid. If large amounts have been ingested, the stomach and intestines should be evacuated.
Treatment is symptomatic and supportive. Digestible fats, oils, or alcohol may increase absorption
and so should be avoided.

5. Fire-fighting measures
Flammable properties Combustible liquid

Flash Point 40 °C / 104 °F

Method Tag Closed Cup

Sensitivity to Mechanical Impact not applicable

Sensitivity to Static Discharge not applicable

Suitable extinguishing media Foam. Carbon dioxide (CO ). Dry chemical. Water spray or fog.
2

Protective equipment and precautions As in any fire, wear self-contained breathing apparatus and full protective gear. Isolate fire area.
for firefighters Evaluate downwind.

NFPA
Health Hazard 3
Flammability 2
Stability 0
Special Hazards -

Page 2 / 9
TalstarÒ 100 EC Insecticide MSDS #: 0681-A
Revision Date: 2012-04-04
Version 1

6. Accidental release measures

Personal precautions Isolate and post spill area. Wear suitable protective clothing, gloves and eye/face protection. For
personal protection see section 8.

Environmental precautions Keep people and animals away from and upwind of spill/leak. Keep material out of lakes, streams,
ponds, and sewer drains.

Methods for containment Dike to prevent runoff. Absorb with earth, sand or other non-combustible material and transfer to
containers for later disposal.

Methods for cleaning up Clean and neutralize spill area, tools and equipment by washing with bleach water and soap. Absorb
rinsate and add to the collected waste. Waste must be classified and labeled prior to recycling or
disposal. Dispose of waste as indicated in Section 13.

Other For further clean-up instructions call FMC Emergency Hotline number listed in Section 1 "Product
and Company Identification" above.

7. Handling and storage

Handling Do not contaminate other pesticides, fertilizers, water, food or feed by storage or disposal.

Storage Keep in a dry, cool and well-ventilated place. Keep away from open flames, hot surfaces and sources
of ignition. Keep out of reach of children and animals. Store in original container only.

8. Exposure controls/personal protection

Exposure guidelines

Chemical Name ACGIH TLV OSHA PEL NIOSH Mexico

Proprietary Material TWA: 25 ppm TWA: 25 ppm TWA: 125 Mexico: TWA 25 ppm Mexico:
mg/m3 TWA 125 mg/m3
Mexico: STEL 35 ppm Mexico:
STEL 170 mg/m3
Xylenes STEL 150 ppm TWA: 100 ppm TWA: 435 Mexico: TWA 100 ppm
1330-20-7 TWA: 100 ppm mg/m3 Mexico: TWA 435 mg/m3
Mexico: STEL 150 ppm
Mexico: STEL 655 mg/m3

Chemical Name British Columbia Quebec Ontario TWAEV Alberta

Proprietary Material TWA: 25 ppm TWA: 25 ppm TWA: 123 TWA: 25 ppm TWA: 25 ppm TWA: 123
mg/m3 mg/m3
Xylenes TWA: 100 ppm TWA: 100 ppm TWA: 434 TWA: 100 ppm TWA: 100 ppm TWA: 434
1330-20-7 STEL: 150 ppm mg/m3 STEL: 150 ppm mg/m3
STEL: 150 ppm STEL: 651 STEL: 150 ppm STEL: 651
mg/m3 mg/m3

Occupational exposure controls

Engineering measures Apply technical measures to comply with the occupational exposure limits. Ensure adequate
ventilation, especially in confined areas. When working in confined spaces (tanks, containers, etc.),
ensure that there is a supply of air suitable for breathing and wear the recommended equipment.

Personal Protective Equipment

General Information If the product is used in mixtures, it is recommended that you contact the appropriate protective
equipment suppliers, These recommendations apply to the product as supplied

Respiratory protection For dust, splash, mist or spray exposures wear a filtering mask.

Page 3 / 9
TalstarÒ 100 EC Insecticide MSDS #: 0681-A
Revision Date: 2012-04-04
Version 1

Eye/face protection For dust, splash, mist or spray exposure, wear chemical protective goggles or a face-shield.

Skin and body protection Wear long-sleeved shirt, long pants, socks, shoes, and gloves.

Hand protection Protective gloves

Hygiene measures Clean water should be available for washing in case of eye or skin contamination. Wash skin prior to
eating, drinking, chewing gum or using tobacco. Shower or bathe at the end of working. Remove and
wash contaminated clothing before re-use. Launder work clothing separately from regular household
laundry.

9. Physical and chemical properties

Appearance light brown liquid
Color light brown
Physical state liquid
Odor aromatic
pH No information available.
Melting Point/Range No information available.
Freezing point No information available
Boiling Point/Range not applicable
Flash Point 40 °C / 104 °F Tag Closed Cup
Evaporation rate not applicable
Autoignition Temperature not applicable
Flammable properties Combustible liquid
Vapor pressure No information available
Vapor density No information available
Density 7.61 lb/gal
Specific Gravity 0.9133 - 0.916 @ 20 °C
Water solubility Emulsifies
Percent volatile No information available
Partition coefficient: not applicable
Viscosity No information available
Oxidizing properties not applicable

10. Stability and reactivity

Stability Stable under recommended storage conditions.

Conditions to avoid Heat, flames and sparks

Hazardous decomposition products Carbon oxides. Hydrogen chloride. Hydrogen fluoride.

Hazardous polymerization Hazardous polymerization does not occur

11. Toxicological information

Acute Toxicity
Large doses of bifenthrin ingested by laboratory animals produced signs of toxicity including convulsions, tremors and bloody nasal discharge.
Bifenthrin does not cause acute delayed neurotoxicity. Experience to date indicates that contact with bifenthrin may occasionally produce skin
sensations such as rashes, numbing, burning or tingling. These sensations are reversible and usually subside within 12 hours.

Page 4 / 9
TalstarÒ 100 EC Insecticide MSDS #: 0681-A
Revision Date: 2012-04-04
Version 1
Eye contact Severely irritating (eyes) (rabbit)
Skin contact Slightly or non-irritating (rabbit)
Ingestion Vomiting after ingestion of this product may cause aspiration of aromatic hydrocarbons into the
lungs, which may result in fatal pulmonary edema.
Inhalation Inhalation of aromatic hydrocarbon vapors may cause dizziness, disturbances in vision, drowsiness,
respiratory irritation, and eye, skin and mucous membrane irritation.

LD50 Dermal > 2,000 mg/kg (rabbit)

LD50 Oral 520 mg/kg (rat)
LC50 Inhalation: > 4.94 mg/L 4 hr (rat)

Sensitization Sensitizer

Chronic Toxicity - Other Ingredient(s)

Chronic Toxicity Repeated or prolonged exposure may cause central nervous system effects. Chronic exposure to
aromatic hydrocarbons may cause liver and kidney damage.

Carcinogenicity Bifenthrin: Not recognized as carcinogenic by Research Agencies (IARC, NTP, OSHA, ACGIH).
Did not show carcinogenic effects in animal experiments.

Mutagenicity Bifenthrin: Not genotoxic

Neurological Effects Tremors were associated with chronic exposure of laboratory animals to bifenthrin, which may
disappear with continued exposure.

Developmental Toxicity Bifenthrin: Not teratogenic in animal studies.

Target Organ Effects Bifenthrin: A slight increase in male mouse urinary bladder tumors at the highest dose was probably
not of toxicological concern.

Chronic Toxicity - Other Ingredient(s) Chronic exposure to aromatic hydrocarbons may cause headaches, dizziness, loss of sensations or
feelings (such as numbness), and liver and kidney damage.

Chemical Name ACGIH IARC NTP OSHA NIOSH - Target

Organs
Pseudocumene eyes,CNS,respiratory
system,skin,blood

12. Ecological information

Ecotoxicity

Bifenthrin (82657-04-3)
Active Ingredient(s) Duration Species Value Units
Bifenthrin EC50 Aquatic organisms 0.11 - 0.57 µg/L
Bifenthrin 96 h LC50 Fish 0.1 - 2.0 µg/L
Bifenthrin LD50 Oral Bobwhite quail >1800 mg/kg
Bifenthrin LD50 Oral Mallard duck >2150 mg/kg
Bifenthrin LD50 Bee 0.1 µg/bee

Chemical Name Toxicity to algae Toxicity to fish Toxicity to microorganisms Toxicity to daphnia and other
aquatic invertebrates

Page 5 / 9
TalstarÒ 100 EC Insecticide MSDS #: 0681-A
Revision Date: 2012-04-04
Version 1
Naphtha (petroleum), heavy 2.5 mg/L EC50 72 h LC50 19 mg/L Pimephales EC50 0.95 mg/L 48 h
aromatic (Skeletonema costatum) promelas 96 h LC50 2.34 mg/L
Oncorhynchus mykiss 96 h
LC50 1740 mg/L Lepomis
macrochirus 96 h LC50 45
mg/L Pimephales promelas 96
h LC50 41 mg/L Pimephales
promelas 96 h
Pseudocumene LC50 7.19-8.28 mg/L EC50 6.14 mg/L 48 h
Pimephales promelas 96 h
Xylenes LC50 13.4 mg/L Pimephales EC50 3.82 mg/L 48 h LC50
promelas 96 h LC50 0.6 mg/L 48 h
2.661-4.093 mg/L
Oncorhynchus mykiss 96 h
LC50 13.5-17.3 mg/L
Oncorhynchus mykiss 96 h
LC50 13.1-16.5 mg/L Lepomis
macrochirus 96 h LC50 19
mg/L Lepomis macrochirus 96
h LC50 7.711-9.591 mg/L
Lepomis macrochirus 96 h
LC50 23.53-29.97 mg/L
Pimephales promelas 96 h
LC50 780 mg/L Cyprinus
carpio 96 h LC50> >780 mg/L
Cyprinus carpio 96 h LC50
30.26-40.75 mg/L Poecilia
reticulata 96 h

Environmental Fate

Bifenthrin (82657-04-3)
Active Ingredient(s) Type of Test Result
Bifenthrin Bioconcentration factor (BCF) 1709
Bifenthrin Half-life in soil ~85 days
Bifenthrin log Pow 6.6
Bifenthrin Mobility in soil Not expected to reach groundwater
Bifenthrin Stability in water Stable to hydrolysis over a wide range of pH
values.

Chemical Name log Pow

Naphtha (petroleum), heavy aromatic 2.9 - 6.1
Pseudocumene 3.63
Xylenes 2.77 - 3.15

Bioaccumulation Material will likely bioaccumulate in exposed species.

13. Disposal considerations

Waste disposal methods Improper disposal of excess pesticide, spray mixture, or rinsate is prohibited. If these wastes cannot
be disposed of by use according to label instructions, contact appropriate disposal authorities for
guidance.

Contaminated packaging Containers must be disposed of in accordance with local, state and federal regulations. Refer to the
product label for container disposal instructions.

14. Transport information

Page 6 / 9
TalstarÒ 100 EC Insecticide MSDS #: 0681-A
Revision Date: 2012-04-04
Version 1
DOT Not regulated for transportation if shipped in Non Bulk packaging. The classification below pertains
to the shipment in Bulk packaging
Note: According to 49 CRF §173.150(f)(1), this material was reclassified as a combustible liquid.
This provision does not apply to transportation by vessel or aircraft, except where other means of
transportation is impractical

Packaging Type Bulk

Proper shipping name Combustible liquid, n.o.s.
Hazard Class Combustible
UN/ID No NA1993
Packing group III
Additional information Xylene is in an "RQ" quantity when this material meets or exceeds 5,555 pounds (666.13 gallons)
per bulk package.

TDG
Proper shipping name Flammable liquid, n.o.s.
Hazard Class 3
UN/ID No UN 1993
Packing group III
Marine pollutant Bifenthrin.
Description UN1993, Flammable liquid, n.o.s. (aromatic hydrocarbons, bifenthrin), 3, III, Marine Pollutant

ICAO/IATA
UN/ID No UN 1993
Proper shipping name Flammable liquid, n.o.s.
Hazard Class 3
Packing group III
Marine pollutant Bifenthrin
Description UN1993, Flammable liquid, n.o.s. (aromatic hydrocarbons, bifenthrin), 3, III, Marine Pollutant
Limited quantity 310 / 220 L

IMDG/IMO
Proper shipping name Flammable liquid, n.o.s.
Hazard Class 3
UN/ID No UN1993
Packing group III
EmS No. F-E, S-E
Marine pollutant Bifenthrin
Description UN 1993, Flammable liquid, n.o.s. (aromatic hydrocarbons, bifenthrin), 3, III (40°C t.c.c.), Marine
Pollutant

15. Regulatory information

U.S. Federal Regulations
SARA 313
Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 (SARA). This product contains a chemical or
chemicals which are subject to the reporting requirements of the Act and Title 40 of the Code of Federal Regulations, Part 372

Chemical Name CAS-No Weight % SARA 313 - Threshold Values

%
Pseudocumene 95-63-6 <25 1.0
Bifenthrin 82657-04-3 11 1.0
Xylenes 1330-20-7 <2 1.0

SARA 311/312 Hazard Categories

Acute Health Hazard yes
Chronic Health Hazard yes
Fire Hazard yes

Page 7 / 9
TalstarÒ 100 EC Insecticide MSDS #: 0681-A
Revision Date: 2012-04-04
Version 1
Sudden Release of Pressure Hazard no
Reactive Hazard no

CERCLA
This material, as supplied, does not contain any substances regulated as hazardous substances under the Comprehensive Environmental
Response Compensation and Liability Act (CERCLA) (40 CFR 302) or the Superfund Amendments and Reauthorization Act (SARA) (40 CFR
355). There may be specific reporting requirements at the local, regional, or state level pertaining to releases of this material.
Chemical Name Hazardous Substances RQs Extremely Hazardous Substances RQs
Xylenes 100 lb

TSCA Inventory (United States of America)

Chemical Name U.S. - TSCA (Toxic Substances Control Act) - Section 8(a) - Chemical-Specific Reporting and
Recordkeeping
Naphtha (petroleum), heavy aromatic Partially exempt chemical substance termed Petroleum Process Stream

Chemical Name U.S. - TSCA (Toxic Substances Control Act) - Section 8(d) - 716.120(a) - Health and Safety Reporting -
List of Substances
Proprietary Material 04/29/1983 02/13/1984

International Regulations

Mexico - Grade Serious risk, Grade 3

Chemical Name Carcinogen Status Mexico

Proprietary Material Mexico: TWA 25 ppm Mexico: TWA 125 mg/m3
Mexico: STEL 35 ppm Mexico: STEL 170 mg/m3
Xylenes Mexico: TWA 100 ppm Mexico: TWA 435 mg/m3
Mexico: STEL 150 ppm Mexico: STEL 655 mg/m3

Canada
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations (CPR) and the MSDS
contains all the information required by the CPR.
WHMIS Hazard Class B3 Combustible liquid
D2B Toxic materials

Component NPRI
Proprietary Material X
( <25 )

16. Other information

Revision Date: 2012-04-04
Reason for revision: (M)SDS sections updated.

Page 8 / 9
TalstarÒ 100 EC Insecticide MSDS #: 0681-A
Revision Date: 2012-04-04
Version 1
Disclaimer
FMC Corporation believes that the information and recommendations contained herein (including data and statements) are accurate as of the date
hereof. NO WARRANTY OF FITNESS FOR ANY PARTICULAR PURPOSE, WARRANTY OF MERCHANTABILITY OR ANY OTHER
WARRANTY, EXPRESSED OR IMPLIED, IS MADE CONCERNING THE INFORMATION PROVIDED HEREIN. The information provided
herein relates only to the specified product designated and may not be applicable where such product is used in combination with any other materials or
in any process. , Use of this product is regulated by the U.S. Environmental Protection Agency (EPA). It is a violation of Federal law to use this product
in a manner inconsistent with its labeling. , Further, since the conditions and methods of use are beyond the control of FMC Corporation, FMC
corporation expressly disclaims any and all liability as to any results obtained or arising from any use of the products or reliance on such information.

Prepared By
FMC Logo - Trademark of FMC Corporation

© 2012 FMC Corporation. All Rights Reserved.

End of Material Safety Data Sheet

Page 9 / 9
 Annexure 03
Draft Service Warranty
 
 SERVICE WARRANTY
General Terms and Conditions
Coverage

 The Service Warranty covers only the treated area/s which shall be restricted to the square feet and
areas as identified in the Quotation Letter.

 The Service Warranty covers only termites and does not provide protection from or coverage of any
other wood destroying organism, insect or pest.

 The period of the Service Warranty is as contained in the attached Quotation letter and shall run
from the date as specified therein.

 The Service Warranty covers treatment of the re-infested area/s alone.

he Service Warranty does not cover replacement or repair of any damage, whatsoever, resulting from termite
infestation.

Notification

 Notification of termite activity, within the warranty period, must be made promptly and in writing to
Lankem Ceylon PLC. Please always quote the reference number indicated on the Warranty
Certificate issued to you.
The Service Warranty shall not apply where there is an unreasonable delay, on the part of the customer, in
notifying any termite activity and where due to such delay the re-infestation has spread.
Exclusions
The Service Warranty shall not apply in the following instances:

1. (1) where there has been a soil disturbance of the treated area/s, whatsoever;

2. (2) where new soil has been added to the treated area/s;

3. (3) where the soil type/s of the treated area/s has been altered in any manner whatsoever;

4. (4) where the treated structure and/or area has been modified, altered or otherwise changed;

5. (5) where re-infestation is caused due to the customer’s failure to take reasonable measures to
eliminate faulty plumbing and/or leaks, dampness and condensation from drains, gutters, toilets,
down spouts, roofs, windows, ceilings etc.; or

6. (6) where re-infestation results due to damage caused to the treated area/s by flood, earthquakes,
fire, hurricane, tornado or any other Acts of God.
7. Force Majeure
 Where Lankem’s performance of its obligations under the Service Warranty are prevented, restricted
or interfered with due to unforeseen events, such failure or non performance of its obligations shall
be overlooked for so long as the inability to so perform continues and such failure or non
performance shall not constitute a default of the Service Warranty or give rise to any claim for
damages. Such unforeseen events shall include lock-outs, strikes or other concerted acts of workmen,
fire, flood, explosion, actions of elements, riots, sabotage, Acts of God, Acts of Government, war or
enemy action etc.

Governing Law

 The Service Warranty shall be governed by the applicable laws of Sri Lanka.