Product Data Sheet
MAK SHEROL BN
DESCRIPTION PERFORMANCE BENEFITS
It is soluble cutting oil blended from refined • Good emulsion stability
mineral oil, emulsifier and other additives. It • Does not decompose chemically
forms stable milky emulsion of the “Oil in
Water” type.
APPLICATIONS
PERFORMANCE LEVEL
This soluble cutting oil is recommended for
• IS 1115 : 1986 [Reaffirmed March, 2002]
soluble cutting oil application used at water to
oil ratios between 20:1 and 30:1.
Characteristics IS 1448 Typical Figures
Appearance -- Light brown clear fluid
Copper corrosion @ 100°C, for 3 hrs P:15 1a
Flash Point, (COC), °C P:69 160
Emulsion Test, 5:1 & 20:1 ratio in water of 400 ppm
P:98 No oil, No cream
hardness (CaCo3)
Froathing test
a) 5:1 & 20:1 ratio in 200ppm hardness (as CaCo3) P:99 Passes
Cast Iron Corrosion Test, 20:1 ratio emulsion with 0 / 0-0 (No corrosion,
--
400 ppm hard water (as CaCo3) passes)
Thermal stability test P:100 Passes
Health and Safety
This oil is not hazardous under normal conditions of use. For further guidance appropriate Material Safety Data Sheet may be
referred.
Bharat Petroleum Corporation Ltd. Edition: R&D / Ind / 064 / Issue1/Oct, 2008
Technical Services
A’ Installation, Sewree (East), Mumbai – 400 015
Phone: 022-24176354, Fax: 022-24182511 / 24166512
email: [email protected]
MAK® makes it possible
