DigiMod IS Series

Integrated Solutions With 2-Channel Amplifier Module And DSP For Professional Applications

DigiMod IS Series consists in three

plug'n'play solutions providing all the
power and the quality of DigiMod
amps on an elegant aluminum heatsink
plate, equipped with interface panel
and connection to mains. Available for
three different DigiMod amplifiers and
including a DSP board for easy and
powerful processing, the DigiMod IS
Series represent a turnkey solution to
develop, with dramatically reduced time-
to-market, an entire line of products,
from single or double subwoofers to
wedges and line array elements.

▶▶ Small 1), Mid 2), High Power 3)

double subwoofer
Load DigiMod 1000 IS DigiMod 1500 IS DigiMod 2000HV IS
▶▶ Small 1), Mid 2), High Power 3)
Single Subwoofer 4Ω 500 W 750 W —
single-ended
▶▶ Small 1), Mid 2), High Power 3) 8Ω 260 W 370 W 1,050 W
mode
2-way stage monitor 16 Ω 130 W 190 W 570 W

▶▶ Small , Mid , High Power

1) 2) 3)
mono-bridged 8Ω 1,000 W 1, 500 W 2,100 W
2-way Single Cabinet / Line Array mode
16 Ω 520 W 740 W 1,140 W
▶▶ High Power Studio Monitors 1)
peak 72 V 92 V 129 V
Max output voltage*
RMS 51 V 56 V 91 V
* single channel EIAJ Test Standard, 1 kHz, 1% THD
▶▶ Thermal protections (Power limiting -
Thermal shutdown)
✓✓ Premium Performances:
▶▶ Short-circuit/overload/high frequency ▶▶ Powersoft class-D technology used in DigiMod modules is an industry
output protections
standard in terms of quality, reliability, robustness and attention to detail.
▶▶ Clip limiter, Permanent signal limiter Accurate design of the Pulse Width Modulation block guarantees maximum
▶▶ Bypass line outputs for external active/ performance, high predictability and immunity from intermodulation artifacts.
passive filters ✓✓ Drastically reduced time-to-market:
▶▶ Temperature controlled internal Fan
▶▶ all you need to quickly develop the product you have in mind – DigiMod IS
and output represents a plug’n’play solution complete with aluminum die-cast chassis,
interface panel with DSP presets selection and LEDs, powercon in and out
▶▶ DSP board included mains connection.
▶▶ Fully integrated in Armonia for ✓✓ Powerful and flexible signal processing tools:
Monitoring, Remote Control & ▶▶ using SigmaDSP based processing boards you can tailor the module’s behavior
Networking with optional DSP board to fit your design: from standard Linkwitz-Riley crossovers to FIR filters, from
limiters to delays and everything in between. Your speakers will be protected
and your product will sound great!
✓✓ Complete set of protections:
▶▶ Powersoft amp modules are equipped with extensive protection circuitry:
power limiters, thermal sutdown, short circuit and overload, clip limiter.
✓✓ Forget mains voltage selection:
▶▶ now all DigiMod modules can be equipped with an automatic mains voltage
selector for world wide operation of all your products; no more worries
about stocking different versions of the same cabinet.
✓✓ Certification process made easy:
▶▶ by providing EMI/safety certifications, reports and documentation that will
effectively cut certification costs on the final product.

CB
CB Certification

1) DigiMod 1000IS 2) DigiMod1500 IS 3) DigiMod 2000HV IS

powersoft_dm-is_data_en_v2.2
DigiMod IS
Integrated Solutions With 2-Channel Amplifier Module And DSP For Professional Applications

Specifications 1)
General
Number of channels 2 ins - 2 outs
Output power 2-channel mode mono-bridged mode
EIAJ Test Standard, 1 kHz, 1% THD 4 Ω / Ch 8 Ω / Ch 16 Ω / Ch 8 Ω / Ch pair
500 W 750 W -- 260 W 370 W 1050 W 130 W 190 W 570 W 1000 W 1500 W 2100 W
Max output voltage 72 Vpeak (51 V RMS) 92 Vpeak (56 V RMS) 129 Vpeak (91 V RMS)
Max output current 28 A peak (20 A RMS) 35 A peak (25 A RMS) 35 Vpeak (25 V RMS)
Max aux supply current draw 200 mA
AC Mains Power
Power requirements
AC 195 V - 250 V, 50/60Hz, I nom = 1.6 A RMS AC 195 V - 250 V, 50/60Hz, I nom = 2.2 A RMS AC 195 V - 250 V, 50/60Hz, I nom = 2.9 A RMS
(selectable voltage range, 1/8 max output
AC 95 V - 125 V, 50/60Hz, I nom = 3.2 A RMS AC 95 V - 125 V, 50/60Hz, I nom = 3.6 A RMS AC 95 V - 125 V, 50/60Hz, I nom = 5.5 A RMS
power)
Efficiency > 85% (typical) > 85% (typical) > 80% (typical)
Power consumption
I/8 of max power @ 8 Ω bridged 178 VA 270 VA 410 VA

Thermal
Max environmental operating temperature 40° C
Thermal dissipation Fan, variable speed, temperature controlled
230 V
I/8 of max output power @ 4 Ω 150 BTU/h 38 kcal/h 213 BTU/h 54 kcal/h 282 BTU/h 71 kcal/h
I/4 of max output power @ 4 Ω 246 BTU/h 62 kcal/h 403 BTU/h 102 kcal/h 464 BTU/h 117 kcal/h
Audio
Gain 32 dB 32 dB 38 dB
Voltage gain x 40 x 40 x 80
Frequency response 10 Hz - 25kHz (± 3dB) for 1 W @ 8 Ω
S/N ratio (amplifier section) > 112 dBA (20 Hz - 20 kHz, A weighted)
Crosstalk separation > 70 dB @ 1 kHz
Input sensitivity @ 8 Ω 1.12 V / 3.2 dBu 1.38 V / 5.02 dBu 1.15 V / 3.43 dBU
Max input level 15 dBu
Input impedance 10 KΩ balanced
THD+N / SMPTE IMD 1) < 0.05% from 0.1 W to full power (typically <0.01%)
DIM100 IMD 1) < 0.02% from 0.1 W to full power (typically <0.005%)
Slew rate 1) 50 V/µs @ 8 Ω, input filter bypassed
Damping factor 1) > 500 @ 100 Hz
Output type unbalanced to ground
DSP & Networking (optional board)
Connector 72-pin SIMM connector (DSP-C and DSP- 4 compatible)
Configuration Configurable with Sigma StudioTM or predefined layout
Remote control Fully supported by Powersoft ArmoníaTM Pro Audio Control Suite
Construction
370 mm x 155 mm x 77 mm 370 mm x 155 mm x 92 mm 370 mm x 155 mm x 92 mm
Dimensions
(14.6 " x 6.1 " x 3 ") (14.6 " x 16.1 " x 3.6 ") (3.9" x 13 " x 3.6 ")
Weight 1.15 kg (2.5 lb)

Application Examples
Please note that the following configuration examples do not cover all possible applications.
Power ratings could vary depending on acoustic design and speaker specifications. Contact Powersoft for support in selecting the ideal solution for your specific needs.

single sub double subwoofer single sub double subwoofer single sub double subwoofer

1000W 500W 500W 1500W 750W 750W 2100W 1050W 1050W

2-way 2-way 2-way

500W 750W 1050W

2-way line array 2-way line array 2-way line array

250W
50W 250W
50W 370W
70W 370W
70W 570W
70W 570W
70W

1) Values refer to DigiMod 1000 IS, DigiMod 1500 IS and DigiMod 2000 HV respectively Data is subject to change without notice.
2) Guaranteed by design © 2012 Powersoft • All rights reserved.

Powersoft S.p.A. • Via Enrico Conti, 5 • 50018 Scandicci (FI) • Italy

+39 055 735 0230 • [email protected] • www.powersoft-audio.com