Scribd Logo
Upload

Welcome to Scribd!

  • 59 views

    Steering Control Valve

    Uploaded by

    Steven Y.M
    This document provides instructions for testing and adjusting the steering control valve on a D7G track-type tractor powered by a 3306 engine. The procedure involves removing plates to access pressure taps, installing pressure gauges, starting the engine, and checking pressure readings when operating the steering levers. If pressure readings are out of tolerance, the sequence relief valve must also be tested and adjusted.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Steering Control Valve

    Uploaded by

    Steven Y.M
    59 views5 pages
    This document provides instructions for testing and adjusting the steering control valve on a D7G track-type tractor powered by a 3306 engine. The procedure involves removing plates to access pressure taps, installing pressure gauges, starting the engine, and checking pressure readings when operating the steering levers. If pressure readings are out of tolerance, the sequence relief valve must also be tested and adjusted.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for testing and adjusting the steering control valve on a D7G track-type tractor powered by a 3306 engine. The procedure involves removing plates to access pressure taps, installing pressure gauges, starting the engine, and checking pressure readings when operating the steering levers. If pressure readings are out of tolerance, the sequence relief valve must also be tested and adjusted.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    59 views5 pages

    Steering Control Valve

    Uploaded by

    Steven Y.M
    This document provides instructions for testing and adjusting the steering control valve on a D7G track-type tractor powered by a 3306 engine. The procedure involves removing plates to access pressure taps, installing pressure gauges, starting the engine, and checking pressure readings when operating the steering levers. If pressure readings are out of tolerance, the sequence relief valve must also be tested and adjusted.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5

    D7G TRACK-TYPE TRACTOR 7MB00001-UP (MACHINE) POWERED BY 3306 EN...

    Page 1 of 5

    Shutdown SIS

    Previous Screen

    ! " #$
    %& ' (( ) % $
    %

    !"#$" %& ' %&(&&( %% ) *(&&( %%

    *+,*-).

    Steering Control Valve - Test and Adjust


    SMCS - 4307-036

    Personal injury can result from hydraulic oil pressure and


    hot oil.

    Hydraulic oil pressure can remain in the hydraulic system


    after the engine has been stopped. Serious injury can be
    caused if this pressure is not released before any service is
    done on the hydraulic system.

    Make sure all of the attachments have been lowered, oil is


    cool before removing any components or lines. Remove the oil
    filler cap only when the engine is stopped, and the filler cap is
    cool enough to touch with your bare hand.

    Introduction
    The steering clutch hydraulic control valve directs oil from the pressure relief valve to the
    steering clutches and to the hydraulic control mechanisms of the brakes.

    Follow this procedure in order to test the pressure setting of the steering clutch hydraulic
    control valve. The steering clutch hydraulic control valve is not adjustable.

    https://198.101.110.37:8443/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/si... 11/19/2008
    D7G TRACK-TYPE TRACTOR 7MB00001-UP (MACHINE) POWERED BY 3306 EN... Page 2 of 5

    Required Tools

    Illustration 1 g01089423
    Tooling (A)

    Illustration 2 g01282274
    Tooling (B)

    Table 1

    Required Tools

    https://198.101.110.37:8443/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/si... 11/19/2008
    D7G TRACK-TYPE TRACTOR 7MB00001-UP (MACHINE) POWERED BY 3306 EN... Page 3 of 5

    Part
    Tooling Item Description Qty
    Number
    Pressure Gauge
    A1 8T-0855 2
    0 to 4000 kPa (0 to 580 psi)
    A2 6V-3989 Fitting 2
    A
    A3 6V-4143 Coupler 4
    Hose As
    A4 177-7861 2
    0 to 6000 kPa (0 to 870 psi)
    B B 8T-3613 Fitting As 2

    Test Procedure
    1. Move the machine to a smooth horizontal location.

    2. Lower all of the implements. Engage the parking brake. Turn the engine OFF.

    Illustration 3 g01301221

    3. Remove bolts (1) and remove plate (2) .

    https://198.101.110.37:8443/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/si... 11/19/2008
    D7G TRACK-TYPE TRACTOR 7MB00001-UP (MACHINE) POWERED BY 3306 EN... Page 4 of 5

    Illustration 4 g01297558
    The pressure taps for the left brake hydraulic control mechanism and the left steering
    clutch are located on top of the bevel gear case. The pressure taps can be accessed by
    removing the plate that is on the back of the machine.

    (H) Pressure tap for the left brake hydraulic control mechanism

    (J) Pressure tap for the left steering clutch

    Illustration 5 g01297560
    The pressure taps for the right brake hydraulic control mechanism and the right steering
    clutch are located on top of the bevel gear case. The pressure taps can be accessed by
    removing the plate that is on the back of the machine.

    (K) Pressure tap for the right steering clutch

    (L) Pressure tap for the right brake hydraulic control mechanism

    4. Remove plug (J) from the left steering clutch. Install tooling (B). Attach tooling (A)
    to tooling (B). Remove plug (K) from the right steering clutch. Install tooling (B).
    Attach tooling (A) to tooling (B) .

    https://198.101.110.37:8443/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/si... 11/19/2008
    D7G TRACK-TYPE TRACTOR 7MB00001-UP (MACHINE) POWERED BY 3306 EN... Page 5 of 5

    5. Start the engine. Warm the power train oil to operating temperature.

    6. Disengage the parking brake. Make sure that the transmission selection lever is in
    the NEUTRAL position. Make sure that the steering control levers are in the
    NEUTRAL position. Operate the engine at LOW IDLE.

    7. Move the steering control lever for the left clutch to the FULL LEFT STEER
    position. Check the pressure at tooling (A) that is connected to pressure tap (J). The
    pressure at tooling (A) should be 2275 kPa (330 psi) minimum. Release the control
    lever. The pressure on tooling (A) should return to zero.

    Repeat this step for the right steering clutch. Check the pressure for the right
    steering clutch at tooling (A) that is connected to pressure tap (K) .

    8. The pressure relief valve of the sequence relief valve must be tested if the pressure
    reading of pressure tap (J) or pressure tap (K) is out of tolerance. Refer to Testing
    and Adjusting, "Sequence Relief Valve - Test and Adjust" that is in this manual for
    the testing and adjusting procedure.

    /0 1 ,,( * . / $ 2 ' %4 , ( (,! : * .


    13 3 4 2
    4 % 5 67 8$89 3 32

    https://198.101.110.37:8443/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/si... 11/19/2008

    You might also like