Scribd
Upload
49 views1 page

ELSTR01D

This document is a data sheet for liquid-immersed power transformers ranging from 500 kVA to 10,000 kVA and up to 34.5 kV HV winding. It includes specifications for ratings, system parameters and windings, impedance, bushing location and connection method, insulating liquid and preservation system, accessories, inspection and tests, documentation, efficiency considerations, and other notes and requirements. Site conditions, special requirements, and applicable codes are also noted for the project.

Uploaded by

Jhonny Rincones
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
49 views1 page

ELSTR01D

This document is a data sheet for liquid-immersed power transformers ranging from 500 kVA to 10,000 kVA and up to 34.5 kV HV winding. It includes specifications for ratings, system parameters and windings, impedance, bushing location and connection method, insulating liquid and preservation system, accessories, inspection and tests, documentation, efficiency considerations, and other notes and requirements. Site conditions, special requirements, and applicable codes are also noted for the project.

Uploaded by

Jhonny Rincones
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

Data Sheet for Design and Manufacture of Liquid-Immersed Power ELSTR01D

Transformers of 500 kVA - 10,000 kVA up to 34.5 kV HV Winding PAGE 1

Client       Engineering Org.       Spec. No.      

Project Title       Location       Date      


Project Location       Contract Number       Equip. No.      

Proj. No.       Specifier Name       Tele. No.      


P. O. No.      

Refer to Specification No. ELSTR01 for General Requirements


Applicable State and Local Codes:      

Data Provided by:  Buyer  Bidder with Proposal  Seller after Order

Site Conditions: Accessories:


Altitude       Ft. Seismic Zone    Current Transformers (as per Section 5.7.2)
Ambient Temperature: Max.     C Min.     C High Voltage Quantity    Ratio      

Low Voltage Quantity    Ratio      


Rating: Neutral Quantity    Ratio      
OA Rating       kVA (as per Section 5.1.2) Dissolved Gas Monitor (as per Section 5.7.4)
Other       Sudden Pressure Relay (as per Section 5.7.5)
System Parameters and Windings: Alarm/Auxiliary Relay Control Voltage     Volts
High Voltage      kV   Phase    Hertz Insulating Liquid and Preservation System (as per Section 6):
Delta Wye Mineral Oil (Type II per ASTM D3487-88) (as per Section 6.1.2)
Solidly Grounded Resistance Grounded Ungrounded Other       (as per Section 6..1.3)
Copper Other Sealed Tank System with Purge Nozzle and Shutoff Valve
Low Voltage      kV   Phase    Hertz Inert Gas Pressure System (as per Section 6.2.2)
Delta Wye Special Requirements:
Solidly Grounded Resistance Grounded Ungrounded Transformer Will Supply Single Large Motor as Follows:
Copper Other HP       Voltage       Full Load       Amps
Impedance: Standard (as per Section 5.1.11) Other       Locked Rotor      Amps Acceleration Time     Seconds
Bushing Location and Connection Method: Transformer will supply non-linear loads: kVA/kW    
High Voltage Line Top Mounted Air Terminal Chamber Other      
Flanged Throat Other       Inspection and Tests (per Section 7):
High Voltage Neutral Top Mounted Air Terminal Chamber  Test as listed in this Practice Witnessed Not Witnessed
Flanged Throat Other       Temp Rise Lightning Impulse Switching Impulse
Low Voltage Line Top Mounted Air Terminal Chamber Front of Wave Radio Influence Voltage
Flanged Throat Other       Audible Sound Level Mechanical Pressure Test
Low Voltage Neutral Top Mounted Air Terminal Chamber Other      
Flanged Throat Other       Documentation:
Space Heaters in Air Terminal Chambers:  Electronic Document Format .dxf Other      
Thermostats Required Not Required Seller to provide:
Cooling Fans:    No. of Copies of All Documentation Plus
Voltage     Volts Remote Contact (as per Section 5.5.11)    No. of Copies of the Operating Manuals
Fan Failure Alarm Required (as per Section 5.7.3) Efficiency Considerations (per Section 5.2):
Other       Seller Shall Optimize Efficiency Based on $       to Offset
Alarm and Monitoring: One (1) KW of Losses at 75% Load Other     % Load
Voltage     Volts Notes and Other Requirements:
     
     

You might also like