0% found this document useful (0 votes)
107 views5 pages

VG400C

This document provides technical specifications for a VG400C diesel generating set. It includes the following key details: - The genset has a 400 KVA/320 kW prime power rating and 440 KVA/360 kW standby rating. It operates at 50Hz and has a 6-cylinder Cummins engine. - Standard features include a compact and durable chassis, easy operation and maintenance, noise reduction features, and a Deepsea DSE7320MKII control system. - Technical details provided include engine specifications, alternator specifications, dimensions, weights, fuel consumption rates, and protection functions of the control system. - Contact information is provided for the distributor of the VG400C

Uploaded by

Vidiya Novelin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
107 views5 pages

VG400C

This document provides technical specifications for a VG400C diesel generating set. It includes the following key details: - The genset has a 400 KVA/320 kW prime power rating and 440 KVA/360 kW standby rating. It operates at 50Hz and has a 6-cylinder Cummins engine. - Standard features include a compact and durable chassis, easy operation and maintenance, noise reduction features, and a Deepsea DSE7320MKII control system. - Technical details provided include engine specifications, alternator specifications, dimensions, weights, fuel consumption rates, and protection functions of the control system. - Contact information is provided for the distributor of the VG400C

Uploaded by

Vidiya Novelin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

TECHNICAL DATA

DIESEL GENERATING SET

50HZ

VG400C
VG400C

Standard Features
• Compact structure with high-strength chassis; • Top lifting, Forklift bottom hole design, easy to
• Easy operation and maintenance, Low cost; transport;
• Excellent performance damping system; • Industrial muffler;
• Compliance with international electrical safety standards of • Noise reduction structure,Low noise;
electrical system; • Convenient power output interface;
• 8 hours base tank; • Control system using Deepsea Module Controller;
• High-performance maintenance-free batteries with isolation • Customized design for user
switch
• 50℃Radiator;

Genset Technical Data


Output frequency 50 HZ
Rated speed 1500 Rpm
Prime power 400 KVA / 320 kW
Standby power 440 KVA / 360 kW
Rated voltage 380/220 V
Phase 3
Noise dB(A) @7m 85 (Max)
Engine model QSNT-G3
Fuel consumption of 100% load 73,4 Litres/h
Fuel consumption of 75% load 57.3 Litres/h

Dimension and Weight (Approximate)


Generating set model Open Type Silent Type
Length(L) (mm) 4000 5100
Width(W) (mm) 1300 1800
Height(H) (mm) 2500 2200
Dry weight (kg) 4250 5296
Tank capacity ( L ) 600 600

Page: 1/4
VG400C

Engine Specifications
Engine model QSNT-G3
Engine manufacturer CUMMINS
Number of cylinders 6
Cylinder arrangement Vertical in-line
Cycle Four stroke
Aspiration Turbocharged and Charged Air Cooled
Bore Stroke (mm mm) 140 x 152
Displacement (Liter) 14.0
Compression Ratio 16.7 : 1
Prime power/speed 358 KW / 1500rpm
Standby power/speed 392 KW / 1500rpm
Speed governor Electrical
Cooling system Jacket Water Aftercooled
Steady speed droop (%) 0.5%
Total lubrication system capacity (L) 38.6
Coolant capacity (L) 21.0 (Engine only)
Fuel consumption at 100% load(Ltr/H) 73.4 (at 1500RPM)
Starter motor DC 24V
Alternator DC 24V
Alternator Specifications
Alternator Brand / Model STAMFORD
Rated output prime power 400 kVA
AVR Type SX440
Rated speed 1500 RPM
Rated frequency 50 Hz
Phase 3
Rated voltage 380/220 V
Exciter type Self excitation, Brushless
Power factor 0.8
Voltage adjust range ≥5%
Voltage regulation ± 1.0 %
Insulation grade H
Protection grade IP23
Winding Stator Double Layer Lap
Winding Pitch Two Third
Winding Leads 12
Waveform Distortion No Load < 1.5% Non Distorting Balanced Linear Load < 5.0%
Maximum Overspeed 2250 rev/min
Optional
Optional Alternator brand WINSTON
Optional Alternator model W444F
Rated output prime power 400 KVA

Page: 2/4
VG400C

Control System
Deepsea – DSE7320MKII
All V-GEN Gensets have a control cabinet (the Deepsea control module DSE6120/DSE7320 as standard)
mounted on isolated support.

Main Features
• AMF and ATS and communication and expansion function

• Designed to work with electronic or non-electronic or gas

engine simultaneously. (support many kinds of engines


ECU).
• Manual, Automatic, Test and remote control mode

selectable.
• Monitoring and measuring operational parameters of the

mains supply and genset.


• Indicating operation status, fault conditions, all
parameters and alarms
• Multiple protections and multiple parameters display.
• Includes 12 inputs and eight outputs. 8 inputs are

configurable and 4 outputs are configurable.


• Can be programmed using the front panel or by using the

PC software.
• Support twelve languages. The language was edited by Protecting Functions
customer.
• Over frequency / under frequency
• Graded protection: pre-alarm, shutdown and electrical
• Over voltage / under voltage
trip, flexible setting.
• Over current
• The module can be pre-set for four operating modes and
• Over speed /under speed
protecting parameters.
• Emergency stop
• The firmware can be updated automatically, so customer
can have the latest version. • Low oil pressure

• High water temperature


• Failure to start/Failure to stop

• Battery charger failure

• Comprehensive shutdown or warning on fault

condition

Page: 3/4
VG400C

Contact Us

DISTRIBUTED BY:
VGEN by Rajawali Diesel reserves the right to make
changes in model, technical specification, color,
configuration and accessories without prior notice.
Please contact the salesman before ordering.
○C Manufactured by VGEN, All right reserved.
Page: 4/4

You might also like