Scribd
Upload
42 views3 pages

Aruba Lab-7-2

This document provides instructions for creating a VRF named TABLE-7 on the Core-1 router. It involves assigning two SVIs, VLAN 711 and VLAN 712, to the new VRF, assigning them IP addresses, and verifying connectivity by pinging two PCs from the VRF's routing table. The configurations are then saved to memory.

Uploaded by

malek
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
42 views3 pages

Aruba Lab-7-2

This document provides instructions for creating a VRF named TABLE-7 on the Core-1 router. It involves assigning two SVIs, VLAN 711 and VLAN 712, to the new VRF, assigning them IP addresses, and verifying connectivity by pinging two PCs from the VRF's routing table. The configurations are then saved to memory.

Uploaded by

malek
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 3

===================================================================================

===========================
Lab 7.2: Creating a VRF
===================================================================================
===========================
Objectives
After completing this lab, you will be able to:
• Create a custom VRF
• Assign SVIs to VRF
• Explore VRF specific routing table

=======================================================
Task 1: Create Table VRF
=======================================================

Objectives
In this activity you will load Lab5-2_final checkpoint in Access-1 and Access-2,
where those two switches were interconnected to the Core switches using ports
1/1/21 and 1/1/22.
NOTE: This activity is dependent on Lab 5.2 configuration, make sure you have
completed that lab before starting the current one. Do not proceed if this is not
the case.

===================
Core-1 (via PC-1)
===================
1. Open the SSH session to Core-1.
2. Ping PC-3 (10.7.11.103) and PC-4 (10.7.12.104). Pings should be successful.
NOTE: Replace the highlighted “X” for your student table number.

Core-1# ping 10.7.11.103


Core-1# ping 10.7.12.104

3. Move to configuration mode and create a VRF named TABLE-7.

Core-1# configure terminal


Core-1(config)# vrf TABLE-7
Core-1(config-vrf)#

Move to interface VLAN 711 and move it to the VRF.

Core-1(config)# interface vlan 711


Core-1(config-if-vlan)# vrf attach TABLE-7
Core-1(config-if-vlan)# exit

4. Move to interface VLAN 712 and move it to the VRF.

Core-1(config)# interface vlan 712


Core-1(config-if-vlan)# vrf attach TABLE-7
Core-1(config-if-vlan)# exit

5. Display the Layer 3 interfaces attached to TABLE-7 VRF.

Core-1(config)# show ip interface brief vrf TABLE-7

6. Assign former IP addresses to interface VLAN 711 and 712.


Core-1(config)# interface vlan 711
Core-1(config-if-vlan)# ip address 10.7.11.1/24
Core-1(config-if-vlan)# exit
Core-1(config)# interface vlan 712
Core-1(config-if-vlan)# ip address 10.7.12.1/24
Core-1(config-if-vlan)# exit
Core-1(config)#

7. Repeat step 6.
Core-1(config)# show ip interface brief vrf TABLE-7

8. Display your customer’s routing table. You will need the VRF command extension
at the end of the line.

Core-1(config)# show ip route vrf TABLE-7

9. Ping PC-3 and PC-4. You will need the VRF command extension at the end of the
line. Ping should be successful.

Core-1(config)# do ping 10.7.11.103 vrf TABLE-7


Core-1(config)# do ping 10.7.12.104 vrf TABLE-7

=======================================================
Task 2: Save Your Configurations
=======================================================
Objectives You will now proceed to save your configuration.

===================
Core-1 (via PC-1)
===================

1. Save the current Core-1’s configuration in the startup checkpoint.


Core-1# write memory

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
You have completed Lab 7.2!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

You might also like