The document describes configuring a VLAN on a switch. It involves:
1) Creating VLAN 711 and assigning it the name "EMPLOYEES"
2) Assigning ports 1/1/1 and 1/1/3 on the switch to VLAN 711
3) Configuring static IP addresses of 10.7.11.101 and 10.7.11.103 on PCs 1 and 3 connected to the VLAN
The document describes configuring a VLAN on a switch. It involves:
1) Creating VLAN 711 and assigning it the name "EMPLOYEES"
2) Assigning ports 1/1/1 and 1/1/3 on the switch to VLAN 711
3) Configuring static IP addresses of 10.7.11.101 and 10.7.11.103 on PCs 1 and 3 connected to the VLAN
The document describes configuring a VLAN on a switch. It involves:
1) Creating VLAN 711 and assigning it the name "EMPLOYEES"
2) Assigning ports 1/1/1 and 1/1/3 on the switch to VLAN 711
3) Configuring static IP addresses of 10.7.11.101 and 10.7.11.103 on PCs 1 and 3 connected to the VLAN
The document describes configuring a VLAN on a switch. It involves:
1) Creating VLAN 711 and assigning it the name "EMPLOYEES"
2) Assigning ports 1/1/1 and 1/1/3 on the switch to VLAN 711
3) Configuring static IP addresses of 10.7.11.101 and 10.7.11.103 on PCs 1 and 3 connected to the VLAN
=========================== Lab 4.1: Configure a VLAN =================================================================================== =========================== Objectives After completing this lab, you will be able to: • Create a custom VLAN and assign it to access ports • Configure clients with static IP addresses • Explore the Switch MAC address table
8. Use the “show vlan summary” command. This command shows the VLAN count in the system.
T11-Access-1(config)# show vlan summary
T11-Access-1(config)# show interface 1/1/1
10. Finally, try the “show interface brief” command followed by a filtering option “| begin 5 Port”.
T11-Access-1(config)# show interface brief | begin 5 Port
======================================================= Task 2: Explore MAC Address Table ======================================================= Objectives In this second task, you will statically define IP addresses to PC-1 and PC-2, so they can achieve intra VLAN layer 3 connectivity, and users on those machines can start collaborating to run their company’s daily operations.
Steps
=================== PC-1 ===================
10.7.11.101 - 255.255.255.0
ipconfig ipconfig -all
=================== PC-3 ===================
If there is any “OOBM” NIC, then disable it.
10.7.11.103 - 255.255.255.0
ipconfig ipconfig -all
=================== Access-1 =================== 22. In Access-1, display the mac-address-table. T11-Access-1# show mac-address-table T11-Access-1# show mac-address-table ?
======================================================= Task 3: Save Your Configurations =======================================================
