Scribd
Upload
1K views1 page

Drawframes RSB D 40 and SB D 40page

Uploaded by

Sudheer Singh chauhan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views1 page

Drawframes RSB D 40 and SB D 40page

Uploaded by

Sudheer Singh chauhan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Technological Data

Type RSB-D 40 SB-D 40 RSB-D 40c

Material Cotton, manmade fibers, blends, fiber length 10-80 mm

Doubling [x] up to 8 up to 8 up to 8

Feed [ktex] 12-50 12-50 12-50

Draft [x] 4,5-11,6 4,4-11,7 4,7-11,6

Delivered sliver weight [ktex] 1,25-7 1,25-7 1,25-6

Technical Data

Delivery single single single

Delivery speed [m/min] up to 1 100 up to 1 100 up to 550

Main motor [kW] 7,50 5,00 3,00

Extraction motor [kW] 1,50 1,50 1,50

Installed power Machine control [kW] 0,26 0,26 0,26

AC autoleveling motor [kW] 1,60 – 1,60

Can changer [kW] 0,25 0,25 0,25

Compressed air/consumption [m3/h] min. 6 bar 0,08 0,08 0,08

STANDARD EQUIPMENT AVAILABLE VERSIONS


• Max. delivery speed 1 100 m/min (RSB-D 40c: 550 m/min) • Can format, infeed: ∅ up to 1 000 mm, height up to 1 520 mm
• Rieter 4-over-3 spring-loaded drafting system • Can format, delivery: ∅ 210-1 000 mm, height up to 1 520 mm
• Drafting system extraction with cleaning lips on top and bottom rollers • Power creel: cans arranged in two rows, one row, T-form
• Automatic filter cleaning • Creel (not driven): double-row can arrangement
• Rapid top roller load relief in the event of stoppages or lap formation • Integrated suction system (exhaust air into room or duct)
• Central drafting system setting without gauges (not on the RSB-D 40c) • Central suction system
• Pneumatic sliver threading-in
• CLEANcoil coiler with honeycomb structure
• Automatic can changer OPTIONS
• Empty can feed for up to 8 reserve cans • Pneumatic top roller loading
• Highly dynamic autoleveling system with „tongue-and-groove“ scanning • Rieter Quality Monitor (RQM) quality monitoring
discs (RSB) • Central lubrication (central nipple or electric pump)
• AUTOset self-adjusting autoleveling (RSB) • Voltage stabilizer
• AUTOhelp fault diagnosis system • Interface to SPIDERweb data collection system
• MEMOset article management for rapid batch changes • Shortened empty can feed (on consultation)
• Central lubricating strip • Docking unit for can trolleys
• Control panel with graphic display • CANlink drawframe interlinking system
• Electronic documentation on DVD • Connection platform for space-saving machine layout
• SLIVERprofessional expert system on CD

Rieter Machine Works Ltd. Rieter Ingolstadt Rieter CZ a.s. The data and illustrations in this brochure and
on the corresponding data carrier refer to the
Klosterstrasse 20 Spinnereimaschinenbau AG Csl. Armady 1181 date of printing. Rieter reserves the right to
CH-8406 Winterthur Friedrich-Ebert-Strasse 84 CZ-56215 Usti nad Orlici make any necessary changes at any time and
T +41 52 208 71 71 DE-85055 Ingolstadt T +420 465 557 232 without special notice. Rieter systems and
Rieter innovations are protected by patents in
F +41 52 208 83 20 T +49 841 95 36 01 F +420 465 557 226 most industrialized countries.
[email protected] F +49 841 95 36 850
1902e-AKAG-Printed in CZ
www.rieter.com

You might also like