SC310BT

Programming
Manual
 SC310BT

Introduction

The SC310BT is a 1D laser barcode

scanner, also known as barcode reader or
barcode gun scanner, is a technical
equipment to read barcode information, by
adopting optics theory, decoding and then
transferring the information to computer
terminal devices via the data cable, widely
used in supermarket barcode billing, logistics
barcode tracking, books ISBN barcode
management, document barcodes voucher
recording, industrial automation applications.

This scanner adopts ARM 32bits CPU, full-

featured, rich in decoding barcodes types, including:
Industrial 25; Standard 25; Matrix 25; China post
25; Interleave 25; Code 11; Codebar; MSI/Plessey;
UK/Plessey; Code39; Standard 39; Code 39 full
ASCII; Code 32; Code 93; Code 128; UPC-A;
UPC-E; EAN-13; EAN-8; EAN/UPC+2/+5; ISBN;
ISSN; GS1-RSS14; GS1-limited; GS1-Expended;
GS1 STACK (GS1 is optional) etc.

One scanner supports KB, USB-HID, RS232,

USB-Virtual COM interfaces all (with interface
automatic judgment), supports USB online firmware
upgrade (DFU), supports serial command trigger
and configuration (need to refer to other manuals),
compatible with USB2.0, USB3.0, Windows NT,
2000, XP, WIN7, WIN8 etc.

Before using the product, please read this

manual carefully. Any help is needed, please
contact us or our distributors. We will certainly
be happy to help you.
CONTENTS

1
2
3
3
4
4
5
6
6
6
7
8
8
9
10
11
11
11
12
12
13
13
13
14
14
15
15
16
17
18
19
20
21
22
23
24
25
27
28
29
30
33
34
35
36
37
38
38
39
41
41
44
48
49
49
50
51
52
54
-1-
-2-
-3-
 *Function keyboard ON

Function keyboard OFF

-4-
-5-
-6-
-7-
-8-
XON: 0X11
XOFF: 0X13
ACK: 0X06
NAK: 0X15

-9-
-10-
-11-
Example:barcode "0123456", need to intercept "234".
Scan "Start" "Data interception starting digit" "0" "0"
"3" "data intercept ending digit" "0" "0" "5" "Intercept
from left to right" "End".

-12-
-13-
-14-
-15-
-16-
-17-
-18-
-19-
-20-
-21-
-22-
-23-
-24-
-25-
-26-
-27-
-28-
Remark: if "Covert to UPC-A" and "Convert to EAN-13"
are enabled both, in actuality convert to EAN-13.

-29-
-30-
Remark: enable 2 digit or 5 digit addenda on page 27
before enable "Addendun mandatory" function.

-31-
-32-
Remark: if "Covert to UPC-A" and "Convert t EAN-13"
are enabled both, in actuality convert to EAN-13.

-33-
-34-
-35-
-36-
Example: If scanner needs 300ms of repeat scan delay.
Delay time T=N*10
300ms=N*10
N=30.
So scan: “Start” “Repeat scan delay ” “0” “3” “0” “End”.

-37-
Remark: Press the button for 10 seconds, the scanner can
be switched between "Automatica induction mode" and
"Manual scan mode”

-38-
-39-
-40-
-41-
-42-
-43-
-44-
-45-
-46-
-47-
-48-
17-1. Pin assingment

-49-
17-2.Default barcode parameter settings table

Transmit Minimun Maxnimun

TYPES Read Verify checking digt length length ID
check
Industrial 2 of 5 N N N 4 64 A
Standard 2 of 5 N N N 4 64 B

MatriX 2 of 5 N N N 6 64 C
Chinese Postal 2 of 5 N N N 6 64 D
Interleave 2 of 5 YES N N 6 64 E
Code 11 N YES N 4 64 F
Codabar YES N N 4 64 G
Code MSI N YES N 4 64 H
Code UK YES YES N 1 64 I
Code39 YES N N 1 64 J
Code32 N N N 8 8 N
Code93 YES YES N 1 64 K
EAN-13 YES YES N 13 13 Q
UPC-A YES YES YES 12 12 O
EAN-8 YES YES YES 8 8 R
UPC-E YES YES YES 7 7 P
Code128 YES YES N 1 100 L
RSS Truncated YES N N 14 14 S
RSS Limited YES N N 14 14 T
RSS Expanded YES N N 1 74 M
Gray background denotes default

-50-
 List Project Name Description Default
1 Scan mode Manual scan
2 Interface setting *Automatic
3 Keyboard language US
4 Function keyboard ON
5 KB/USB Enable digital keypad Disable
6 Caplock Ignore Not ignore
7 KB clock 10K(slow)
8 Baud rate 9600
9 Data bits 8
10 Parity None
11 Stop bits 1
RS-232
12 Communication None
handshake
13 Allow COM settings No
14 COM trigger Disable
15 COM beep Disable
16 Terminator Enter(0x0d)
17 Caps lock Origianl data
18 Data inversion Disable
19 CODE ID OFF
20 Data editing Data interception All output
21 Overall Prefix and Suffix None
Overall decoding None
22
length limitation
23 Character delay None
24 String delay None
Beeper Successful decoding Middle tone,
25 Long duration
settings sound tips
26 Starting sound tips ON
27 Repeated None
Other
28 functions Inverse barcode decoding OFF
29 Automatic induction ON
Remark: for USB-HID cable, KB cable, and RS232 cable, they can
be detected automatically. If using vitual serial port, must configure
to "RS232 / USB vitual serial port" (page 3).

-51-
17-4. ASCII TABLE

-52-
-53-
17-5. FULL ASCII TABLE

-54-
-55-
-56-
-57-
-58-
-59-
-60-
-61-
-62-
 WIN (&V)

HOME (&W)

END (&X)

-63-
 Sample bar codes

S N0 0 0 1 0 1 3 0 0 0 7

$- : +. / 1018009

99078006500123456789012345

0 80123 45678 6 12345

EAN-13 with 2

8 820212 248548 62

-64-