Tor 31

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

NEPTUNE PC AS and AL

Pressure-Compensating Drip line

The NEPTUNE PC drip line is available in two


versions, ANTI-SIPHON (AS) and NO-DRAIN (AL),
with an integrated pressure-compensating emitter . RANGE
The pressure-compensating mechanism of the Neptune PC is available in a complete range
emitter constantly ensures: of configurations:
– High resistance to clogging; • Diameter 16 mm
Wall thickness 0.9, 1.0, 1.1 mm
– High distribution uniformity;
– Multi-year durability. • Diameter 20 mm
Wall thickness 0.9, 1.0, 1.2 mm
The great distribution uniformity optimises the crop
• Emitter spacing
results; each plant receives the same amount of 20/25/30/40/45/50/60/70/75/80/90/100 cm

water, nutritional factors and fertilizers. (other spacing available on request)

Neptune PC can be laid on the surface, • Grouped spacing (optional)

underground or attached to a wire. • 4 different Pressure-compensating emitters (PC)


- 3.8 l/h between 0.5 and 3.5 bar;
- 2.4 l/h between 0.5 and 3.5 bar;
- 1.6 l/h between 0.5 and 3.5 bar;
- 1.2 l/h between 0.5 and 3.5 bar.

• 2 different versions of emitters


- ANTI-SIPHON, AS;
- NO-DRAIN, AL.

MAIN FEATURES
The pressure-compensating emitter makes Neptune PC the perfect – Considerable design flexibility thanks to the wide range of
choice for: Emitters and the choice of spacing;
– Difficult topographic conditions, particularly on undulating – Blue line for easy identification;
ground;
– Outlet hole made using precision mechanical technology;
– Installations requiring long side lines;
– Product ID code engraved on the tubing;
– Variable or low water pressure.
– The ANTI-SIPHON system prevents impurities from entering
the emitter from the outside, therefore it can also be installed
Neptune PC boasts the following advantages: underground, perfectly maintaining both its irrigation
– A pressure-compensating system which maintains a constant characteristics and its multi-year durability.
flow rate even when the pressure varies (between 0.5 and 3.5 – The NO-DRAIN system (which is also anti-siphon) is the version
bar), guaranteeing precise water and nutrient delivery even in specifically designed to be installed in all those irrigation
the toughest conditions; systems where short and frequent irrigation cycles are required.
– High resistance to clogging thanks to the AS (Anti-siphon) Thanks to its low-pressure closing system, the emitter allows:
System (present both in the AS and in the AL version) which - Preventing leaks thus ensuring perfect irrigation uniformity;
reduces the suction effects by preventing take-up of impurities;
- Maintaining the system pressurised thus resulting in a further
– Extraordinary efficiency, allowing implementing long side lines saving in time, water and energy.
with very uniform water distribution;

30 I.S.E. S.r.l reserves the right to change the product specifications without prior notice
and without incurring any penalties.

You might also like