Rcr412siz Om
Rcr412siz Om
When your device turns off, press Brand Code Search NOTES 3. Press and hold the device key you want to program (the 1. Manually turn on the device you Tour of the Remote Accessing Device Menus and Guides Code Retrieval Problem: The device’s menu does not appear on the TV screen.
Step 2: Program your remote the REVERSE key on the remote The Brand Code Search goes through only the codes for one of ON•OFF key comes on). want to control. Many devices use on-screen menus and guides to help you Once you’ve programmed the remote to control your devices, Troubleshooting • Make sure you have connected the device to your TV properly and
and wait at least 2 seconds. the select brands listed in the accompanying code list. If your Throughout the programming of each key, be sure to keep navigate through all their features and programming. While you may want to record the codes for future reference. If selected the correct input. (See your devices’ Owner’s Manuals for
the remote pointed at the IR sensor of the device you are While you’re holding down the device key, use your other proper connection procedures.)
To use this universal remote with your home entertainment The remote tries the last of the brand of device is listed, this search can be very quick and easy. In most cases, the keys on this remote may not access every menu or guide system you used the Direct Code Entry method, this is easy. Just
currently programming the remote to control. hand enter the first five-digit code for your brand in the Problem: The remote does not operate your device.
system, first you need to program it to control your devices. previous ten codes. this remote perform the same of every device model, it does offer some menu and guide find the codes you entered and make a note of them in the • Make sure the remote is in the correct mode by pressing the
code list (the ON•OFF key goes off after the first digit). • Make sure the remote is in the correct mode by pressing the
There are four ways you can program the universal remote to Test the remote with the device to make sure the device functions as the keys on your functionality. boxes below. If you used one of the Code Search methods to corresponding device key (TV, SAT•CBL•DTC, DVD, VCR•AUX).
Did your device turn on? TIPS: Each device key is associated with a type of device— 2. Press and hold the device key you want to program. While corresponding device key (TV, SAT•CBL•DTC, DVD, VCR•AUX).
key is programmed with the correct code for maximum program your remote or if you used the Direct Entry method This tells the remote which device to operate.
operate your devices: the TV is preset to search for TVs, SAT•CBL•DTC for satellite original remotes once you’ve To use a device’s on-screen menu or guide system, you first
Universal Remote Control YES: Press the STOP key. You’re you’re holding down the device key, use your other hand This tells the remote which device to operate.
functionality. If some features don’t work, try a different programmed this remote to have to put the remote in Menu or Guide Mode. but don’t remember the code, you will need to retrieve each • Menu access isn’t supported for all brands. You may need to use
done! You’ve programmed this receivers, cable boxes or digital TV converters, DVD for to press and hold the remote’s ON•OFF key at the same • Remove any obstacles between the remote and the device. Make
• The Auto Code Search goes automatically through all the code. See the “Testing the Code for Maximum Functionality” operate your components. device’s five-digit code. Retrieving the actual code and writing your original remote control to access menu functions for some
DVD players, and VCR•AUX for VCRs or DVRs. To program 1. Make sure your devices are turned on and your TV is set
Owner’s Manual codes for the device you’re trying to control. It’s the easiest device key. section below for more information. time. it down will save you time if you ever need to program the sure you’re aiming the remote at the device’s IR sensor. devices.
a device key for a different type of device, see the Changing Many keys on this remote
method, but it can sometimes take longer than some of the to the correct device input (use the INPUT key to toggle remote again (e.g., if programming is lost when you change • Make sure the batteries are fresh and are properly installed.
NO: Press REVERSE again. The remote tests the next a Key’s Device Type section. have other functions as well.
other programming methods. During the Brand Code Search, the remote ignores through inputs when in TV Mode.) the batteries). If the codes are recorded, you can use the Replace the batteries with two new AA batteries, if necessary For more information, please visit www.rcaaccessories.com
code in the batch.
RCR412BZ / RCR412SZ / RCR412SIZ keypresses that aren’t part of the search. Illuminated ON•OFF key 2. Press the device key whose menu you want to access. Direct Entry method to reprogram your remote to control your (see the Battery Installation section).
Keep pressing REVERSE every 2 seconds until your device The ON•OFF key serves as an indicator light during Consumer Help Line: 1-800-420-7968
• The Brand Code Search searches through the codes for serves as an indicator light to devices, which is quick and easy.
programming, giving you feedback at each stage of the The search times out after two minutes (the ON•OFF key 3. To access menus, press the MENU key. To access guides,
select brands of devices. It’s not as easy as the auto code turns back on. When it does, press STOP. Problem: The remote can’t be programmed to operate your
process. blinks four times and turns off, and the last programmed provide feedback.
search, but it can be faster. press the GUIDE key. The ON•OFF key starts blinking,
Note: If you accidentally press the REVERSE key after your ON•OFF key 1. Press and hold the device device.
Manual del Propietario (parte posterior) code under that device key is retained). indicating you are in Menu or Guide Mode.
• The Direct Code Entry lets you enter a code from the
device turns on, press the FORWARD key. Then, wait two To exit without saving a new code at any point in the Brand Device keys (TV, key (TV, SAT•CBL•DTC, DVD, • If you are testing the remote while programming it, you may be Care and Maintenance
The ON•OFF key blinks four times and turns off when the SAT•CBL•DTC, DVD,
seconds to see if your device turns off again. Code Search, press the GO BACK key. 4. Use the VOL+/- and CH+/- keys to VCR•AUX) whose code you too far away from the device or at a wrong angle. There must be • Keep the remote dry. If it gets wet, wipe it dry immediately.
accompanying code list for your brand of device. It’s not as remote has gone through all the codes. The remote exits the
easy as the other methods, but it’s potentially the fastest Brand Code Search. If your device hasn’t turned off yet, try a
3. Wait until the ON•OFF key comes on and stays on. Then VCR•AUX) put the remote in navigate through the on-screen wish to retrieve. The ON•OFF an unobstructed path between the remote and the IR sensor on • Use and store the remote only in normal temperature
release both keys. the right mode to control your menu system or guide. To select the key turns on. Keep pressing the the device. Move closer and make sure you point the remote at
method. different search method. environments.
SAVE THIS MANUAL AND THE CODE LISTS! NOTES device. the device you’re trying to control.
Remote controls can sometimes lose their programming
1. Manually turn on the device you 4. Point the remote directly at the front panel of the device you
highlighted item, press the OK key. device key. • Handle the remote gently and carefully. Don’t drop it.
• The Manual Code Search lets you manually go through • If you’re using the Direct Entry programming method to enter
when you change the batteries. Make sure you keep the all the codes for the device you’re trying to control.
Throughout the programming of each key, be sure to keep want to control. 4. When you’ve finished entering the five-digit code, keep want to control. Press ON•OFF on the remote and wait 2
Backlight key ( ) turns TIP: If the remote doesn’t respond,
the codes for your brand and the unit is still not functioning • Keep the remote away from dust and dirt.
the remote pointed at the IR sensor of the device you are Testing the Code for Maximum Functionality holding down the device key and look at the ON•OFF key. backlighting on/off. check to see that the ON•OFF key is 2. While holding the device key down, press and hold the
manual and code lists in a safe place so that you can seconds. The remote is testing a single code for your device. properly, try the auto, brand, or manual search method. • Wipe the remote with a damp cloth occasionally to keep it
currently programming the remote to control. still blinking. The ON•OFF key times INFO key. The ON•OFF key turns off. After holding down
reprogram the remote if you need to. 1. Try a variety of the device’s functions with the remote. If Is the ON•OFF key on? GUIDE and MENU put the • To control combo units, like TV/VCRs or TV/DVDs, you must looking new.
out after 20 seconds. If this happens, both keys for three seconds, the ON•OFF key turns back
some device features don’t work, go to the next step to try Did your device turn off? remote in menu/guide mode, • Modifying or tampering with the remote’s internal devices can
Tip: This remote is already programmed to operate Auto Code Search Test the remote with the device to make sure the
a different code. YES: You’re done! You’ve programmed this device key. just press the MENU key again, and on.
program the individual corresponding device keys to control
device key is programmed with the correct code for which makes the CH/VOL each part of the combo unit. Once programmed successfully, the cause malfunction and invalidate its warranty.
most RCA-branded TVs, VCRs, DVD players and satellite The Auto Code Search goes automatically through all the
maximum functionality. If some features don’t work, try
2. Find your device’s brand in the List
s d Cod
Bran e.
g the ’s Guid
e Sear
ch
gos
codes for the device you’re trying to control. When you find
o
Códi
for outl ar utili ltado
used hod ram resa
met prog marcas,
es are Entry
a de
d Cod and s para de
either entered a code number that is not in the code lists or controls the VCR or DVD functions.
zado gos
Bran utili de códi s
List
the device turns off for the first time, don’t press the STOP
de
Cód
the one that operates your device, you can stop the search and
Los odos
a DVD player, TV for a television, SAT•CBL•DTC for a accompanying code list. Circle
los
mét /Lis
e List
Vizio
Cod Toshiba
nd TV Sony
• Make sure the batteries are fresh and are properly installed.
vox Panaso
Magna 6
key, which would store the same code. Instead, with the
Philips
5
VCR
Symph
1 Sony
0 9
original remotes.
Panaso
vox Mitsub
ishi 7
Magna 6
until the unit turns back on. after 20 seconds of inactivity (no keys being pressed). At that
JVC
4
1 AB
your device.
l Networ s
7
time, the remote clears the displayed menu from the TV.
Echosta
NOTES
RCA
GE 3
PROSC
AN
2
1
the TV is preset to search for TVs, SAT•CBL•DTC for satellite 3. Once the unit turns back on, you have found another code corresponding device key (TV, SAT•CBL•DTC, DVD, VCR•AUX).
The search times out after two minutes (the ON•OFF key Keep pressing ON•OFF every 2 If you want to exit the Menu Mode yourself, press the Note: All TV codes begin with the number 1; all VCR and DVR
Step 1: Install your batteries receivers, cable boxes or digital TV converters, DVD for blinks four times and turns off, and the last programmed
that operates the device. Press the STOP key. Remember to enter the code for future reference in the box
seconds until your device turns off.
navigation keys in menu
corresponding device key on the remote (TV, SAT•CBL•DTC, codes begin with the number 2; all DVDs, the number 3; and
This tells the remote which device to operate. Voxx Accessories Corporation (the “Company”) warrants to you the
DVD players, and VCR•AUX for VCRs or DVRs. To program code under that device key is retained).
3. Press and hold the device key you want to program. While 4. Test the key’s functionality again by attempting to control
provided in the Code Retrieval section of this manual.
When it does, press STOP.
systems as well as channel
• Make sure device is ready (for example, the DVD player has a
original retail purchaser of this product that should it, under normal use
and conditions, be proven defective in material or workmanship during
you’re holding down the device key, use your other hand and volume controllers Actual model may vary DVD, VCR•AUX). The ON•OFF key turns off. all satellite receivers, cable boxes and digital TV converters,
Your universal remote requires two AA alkaline batteries a device key for a different type of device, see the Changing a variety of the device’s functions. If the code that has If your brand isn’t listed in the code list, use one of the Code disc loaded). its lifetime while you own it, such defect(s) will be repaired or replaced (at
to press and hold the remote’s ON•OFF key at the same outside the menus. The from illustration the number 5.
(batteries may or may not be included, depending on model). a Key’s Device Type section. The ON•OFF key blinks four times and turns off when the been stored controls the majority of the device’s functions, Search methods to program the remote control. (Refer to the TIP: Because there are so many codes, you may have to press the Company’s option) without charge for parts and repair labor.
CH keys also provide skip • You may have pressed an invalid key for the mode the remote is in.
remote has gone through all the codes. The remote exits time. programming is complete. If the code stored does not give Auto and Manual Code Search methods.) the ON•OFF key many times—possibly hundreds of times. 5. Repeat step 4 until you have retrieved all five numbers in
To exit without saving a new code at any point in the Auto forward and skip back control To obtain repair or replacement within the terms of the warranty, the
• If you’re trying to enter a channel number directly, try pressing
To install the batteries: Code Search, press the GO BACK key. the Auto Code Search. If your device hasn’t turned off yet, maximum functionality, try another code.
If you release the device key any time during the Direct Code for DVD players and DVRs Advanced Functions the code. After the fifth number is retrieved, the ON•OFF
key blinks briefly, then turns off. the OK key after entering the channel number as this is a
product is to be delivered with proof of warranty coverage (e.g. dated bill
1. Remove the battery compartment try a different search method.
Entry procedure, the ON•OFF key blinks four times, and
NOTES that support this functionality. requirement of certain models and brands.
of sale), specification of defect(s), transportation prepaid, to an approved
warranty station. For the location of the nearest warranty station to you,
cover. Throughout the programming of each key, keep the remote TIP: To exit the Code Retrieval Mode at any time, press the
the process is exited. The last programmed code under the • There is a possibility that a programmed code may only be call toll-free to our control office: 1-800-645-4994.
1. Manually turn on the device you device key is retained. pointed at the IR sensor of the device you are programming GO BACK exits remote programming; it also performs the Changing A Key’s Device Type GO BACK key.
able to control some of your device features (for example, only
Testing the Code for Maximum Functionality This Warranty does not cover product purchased, serviced or used
2. Insert the batteries, matching the want to control. Direct Code Entry the remote to control. same functions as on your original remotes.
Each device key is associated with a type of device—the TV is
Note: If you press an invalid key during the Code Retrieval turns a device on and off). To confirm that the device key is outside the United States or Canada. This Warranty is not transferable
batteries to the (+) and (–) marks 1. Try a variety of the device’s functions with the remote. If Direct Code Entry lets you enter a code from the accompanying Test the remote with the device to make sure the device process, the remote will not respond. If you do not press a programmed with the correct code for maximum functionality, and does not extend to costs incurred for installation, removal or
Test the remote with the device to make sure the device The INPUT and — (dash) key has three functions: (1) it toggles preset to search for TVs, SAT•CBL•DTC for satellite receivers,
inside the battery compartment. some device features don’t work, go to next step to try a code list for your brand of device. It’s not as easy as the other key is programmed with the correct code for maximum valid Code Retrieval key (TV, SAT•CBL•DTC, DVD, VCR•AUX, test the device. Attempt to control a variety of the device’s reinstallation of the product. This Warranty does not apply if in the
key is programmed with the correct code for maximum through all the video sources connected to your TV; (2) when cable boxes or digital TV converters, DVD for DVD players, and
different code. methods, but it’s potentially the fastest method. functionality. If some features don’t work, try a different code INFO, GO BACK), Code Retrieval times out after 15 seconds. functions with the remote. If some of the features of your Company’s opinion, the product has been damaged through alteration,
3. Push the battery cover back into place. 4. Wait until the ON•OFF key comes on and stays on. Then in the list.
functionality. If some features don’t work, try a different the remote is in VCR mode, this button toggles between VCR VCR•AUX for VCRs or DVRs. To program these keys to control
The ON•OFF key blinks four times, and then turns off. devices don’t work, try programming the remote with a different improper installation, mishandling, misuse, neglect, accident, or the
release both keys. code. See the “Testing the Code for Maximum Functionality” and the TV input; (3) when you’re entering digital channel a different kind of device, you have to reassign them first.
2. Press and hold the device key you want to program. While 2. Repeat the Auto Code Search Method from the beginning. TIP: Each device key is associated with a type of device—the section below for more information. code in the list using the Direct Code Entry Method, until you simultaneous use of different battery types (e.g. alkaline, standard or
rechargeable).
you’re holding down the device key, use your other hand When your device turns off, do not stop searching. numbers directly, this button lets you separate the main find the code that allows the remote to control the majority of
TV is preset to search for TVs, SAT•CBL•DTC for satellite Reassigning the VCR•AUX Key To Control Other TV CODE SAT•CBL•DTC CODE
During the Manual Code Search, the remote ignores channel number from the sub-channel number (such as 59.1).
to press and hold the remote’s ON•OFF key at the same Instead, with the unit now off, continue to press the PLAY 5. Look at the number you circled for receivers, cable boxes or digital TV converters, DVD for DVD
keypresses that aren’t part of the search. Devices
your device’s functions. Different codes can provide different
levels of functionality.
THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS
LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN
Battery Precautions: time. key every 5 seconds until the unit turns back on. your device’s brand code number. players, and VCR•AUX for VCRs and DVRs. To program a
IMPORTANT
The VCR•AUX key defaults to control a VCR or DVR. If you want 1 5 NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE
3. Once the unit turns back on, press the REVERSE key on the Press that number on the remote device key for a different type of device, see the Changing a The search times out after two minutes (the ON•OFF key the VCR•AUX key to control a different device (an additional PRICE PAID BY PURCHASER FOR THE PRODUCT.
• Do not mix old and new batteries. Problem: The ON•OFF key does not light when you press a key.
remote every 2 seconds until your device turns off again. keypad. Key’s Device Type section. blinks four times and turns off, and the last programmed Because this remote controls more than one device, you TV, DVD, satellite, cable box or digital TV converter, for
• Do not mix alkaline, standard (carbon-zinc) or This Warranty is in lieu of all other express warranties or liabilities.
When your device turns off again, press the STOP key.
Manual Code Search code under that device key is retained). must first “tell” the remote which device you wish to example), you must reassign it.
SAT CABLE DTV CONVERTER • You may have pressed an invalid key for the mode the remote is
ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF
rechargeable (nickel-cadmium) batteries. The ON•OFF key serves as an indicator light during in.
The Manual Code Search lets you go one-by-one through all The ON•OFF key blinks four times and turns off when the operate. That means, if you wish to operate your TV, you MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL
• Always remove old, weak or worn-out batteries promptly 4. Test the key’s functionality again by attempting to control programming, giving you feedback at each stage of the the codes for the device you’re trying to control. When you find 1. Press and hold the VCR•AUX key. The ON•OFF key turns on. • Make sure the remote is in the correct mode by pressing the BE LIMITED TO DURATION OF THIS WARRANTY. IN NO CASE SHALL
remote has gone through all the codes. The remote exits the must first press the TV key to put the remote in the TV DVD CODE VCR•AUX CODE
and recycle or dispose of them in accordance with Local a variety of the device’s functions. If the code that has process. the one that operates your device, you can stop the search and corresponding device key (TV, SAT•CBL•DTC, DVD, VCR•AUX). THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL
Manual Code Search. If your device hasn’t turned off yet, try Mode. The remote stays in that device mode until you press
and National Regulations. been stored controls the majority of the device’s functions, 6. Point the remote directly at the store that code. a different device key. For example, if your remote is in TV
2. While holding down the VCR•AUX key, press and release the This tells the remote which device to operate. DAMAGES WHATSOEVER. No person or representative is authorized
a different search method. to assume for the Company any liability other than expressed herein in
programming is complete. If the code stored does not give front panel of the device you want number key on the keypad for the device you wish to control 3 • Make sure the batteries are fresh and are properly installed.
3. Wait until the ON•OFF key comes on and stays on. Then maximum functionality, try another code. to control. Press ON•OFF on the 1. Manually turn on the device you TIPS: The ON•OFF key serves as an indicator light during
Mode and you want to operate the DVD player, you must (see the chart below). The ON•OFF key turns off. Replace the batteries with two new AA batteries, if necessary
connection with the sale of this product.
release both keys. Testing the Code for Maximum Functionality press the DVD key to change device modes.
remote and wait 2 seconds. The want to control. Some states/provinces do not allow limitations on how long an implied
Battery Saver programming, giving you feedback at each stage of the process.
VCR•AUX KEY CONTROLS:
DVR/VCR DVD TV SAT•CBL•DTC
(see the Battery Installation section).
warranty lasts or the exclusion or limitation of incidental or consequential
remote is testing a single code for 1. Try a variety of the device’s functions with the remote. If
Your universal remote control saves battery power by 4. Point the remote directly at the your device’s brand. Each device key is associated with a type of device—the TV is some features of your devices don’t work, go to the next Backlighting Problem: The remote will not change channels on device.
damage so the above limitations or exclusions may not apply to you.
automatically turning off if any key is pressed for more than front panel of the device you preset to search for TVs, SAT•CBL•DTC for satellite receivers, Additional TV press 1 This Warranty gives you specific legal rights and you may also have other
step to try a different code. Backlight illumination helps you see the remote control keys • Make sure the remote is in the correct mode by pressing the rights, which vary from state/province to state/province.
60 seconds. This saves your battery life should your remote want to control. Press PLAY on Did your device turn off? cable boxes or digital TV converters, DVD for DVD players,
get stuck in a place where the keys remain depressed, such as the remote and wait 5 seconds.
2. Find the Code List that came with List
s d Cod
Bran e.
e Sear
ch
and VCR•AUX for VCRs or DVRs. To program a device key for 2. Repeat the Manual Code Search from the beginning. When better in the dark. You can turn backlight illumination on or off VCR or DVR press 2 corresponding device key (TV, SAT•CBL•DTC, DVD, VCR•AUX).
the remote. Locate the section for This tells the remote which device to operate.
g the ’s Guid
YES: Press the STOP key to store the code. You’re done!
g usin User
gos
the device turns off for the first time, don’t press the STOP
min in the o
ram zand
prog ined
Códi
ar utili ltado
List
son rio. rca
cas entrada usua Ma
mar y del s de
long as keys are being pressed and turns off six seconds after
de la guía
Cód
key, which would store the same code. Instead, with the
Los odos
Type section.
Cod Toshiba
the last keypress. Once the backlight time has timed out, any
Philips
5
VCR
Symph
1
• Remove any obstacles between the remote and the device. Make
Sony
0 9
NO: Press ON•OFF again. The remote tests the next code
Sharp
Panaso
nic
8
vox Mitsub
ishi 7
6
digital TV converter
JVC
ng
4
Did your device turn off? until the unit turns back on.
RCA Samsu
GE 3 Toshiba
PROSC
AN
2 D Sony
because the remote searches through all of the codes in and you press the backlight key, the backlight turns off.
JVC
RCA Apex 4
GE 3 nic
PROSC
AN
2 LE AMNIO
Panaso
1 AB Magna
vox ADB
0 SAT/C
3. Once the unit turns back on, you have found another code
ic
Scientif
s
Philips
9
Hughe k Atlanta
8
YES: Go to step 5.
l Networ s
Generaents System 7
Codes or the Code Lists, first try the Brand Code Search or that operates the device. Press the STOP key. times and then turns off. The VCR•AUX key is now set to 3502 Woodview Trace, Suite 220
NO: Press PLAY again. The remote tests the next batch of turns off. When it does, press STOP.
10 codes. the Direct Code Entry method. 4. Test the key’s functionality again by trying a variety of control the device type you selected. Indianapolis, IN 46268
functions. If the code controls the majority of the device’s
To exit without saving a new code at any point in the Manual 4. Follow the directions in the auto, brand, direct entry, or Trademark(s) ® Registered
Keep pressing PLAY every 5 seconds until your device functions, programming is complete. If the code stored RCR412SIZ US 00
turns off. Code Search, press the GO BACK key. manual code search to program the VCR•AUX key.
does not give maximum functionality, try another code.
5. Cuando el dispositivo se apague, Búsqueda de Códigos por Marca NOTAS 3. Oprima y sostenga la tecla de dispositivo que desea programar 1. Encienda manualmente el dispositivo Recorrido del control remoto Cómo Lograr Acceso a las Guías y Menús Recuperación de Códigos Problema: El control remoto no cambia canales en el dispositivo.
Paso 2: Programe el control remoto oprima la tecla REVERSE del control La Búsqueda de Códigos por Marca recorre sólo los códigos (la tecla ON•OFF se ilumina). que desea manejar.
de Dispositivos Una vez haya programado el control remoto para manejar sus Resolución de Problemas • Asegúrese que el control remoto se encuentre en el modo
A través de la programación de cada tecla, asegúrese de
remoto y espere por lo menos 2 de una de las marcas seleccionadas que aparecen en la lista de Mientras oprime la tecla de dispositivo, ingrese con la otra mano dispositivos, se recomienda anotar los códigos para futura correcto oprimiendo la tecla de dispositivo correspondiente (TV,
mantener el control remoto apuntado directamente al sensor Muchos dispositivos utilizan guías y menús en pantalla para
Para utilizar este control remoto universal con su sistema de segundos. El control remoto prueba el códigos suministrada. Si la marca del dispositivo aparece en la lista, el primer código de cinco dígitos para la marca de la lista de referencia. Si utilizó el método de Entrada Directa de Códigos, es SAT•CBL•DTC, DVD, VCR•AUX). Esto le indica al control remoto el
infrarrojo del dispositivo que está actualmente programando con En la mayoría de los casos, ayudarle a navegar a través de sus funciones y programación.
entretenimiento en el hogar, necesitará primero programarlo último código del grupo anterior de 10 posiblemente la búsqueda se llevará a cabo de manera fácil y rápida. códigos (la tecla ON•OFF se apaga luego del primer dígito). muy sencillo. Simplemente encuentre los códigos que ingresó Problema: El control remoto no maneja su dispositivo. dispositivo que debe manejar.
el control remoto. las teclas del control remoto Aunque este control remoto quizá no logre acceso a todos los
para manejar sus dispositivos. Para programar el control remoto códigos. sistemas de guías o menús de cada modelo de dispositivo, sí ofrece y anótelos en los recuadros a continuación. Si utilizó uno de los • Asegúrese que el control remoto se encuentre en el modo • Oprima la tecla OK luego de haber ingresado un número de
Pruebe el control remoto con el dispositivo para asegurarse que desempeñan las mismas
universal para manejar sus dispositivos, utilice uno de los cuatro 2. Oprima y sostenga la tecla de dispositivo que desea programar. funciones que las teclas de los alguna funcionalidad de menús y guías. métodos de Búsqueda de Códigos para programar el control correcto oprimiendo la tecla de dispositivo correspondiente (TV, canal.
¿Se encendió el dispositivo? CONSEJOS: Cada tecla de dispositivo está asociada a un la tecla de dispositivo esté programada con el código correcto A la vez que sostiene la tecla de dispositivo, utilice la otra mano remoto o si utilizó el método de Entrada Directa pero no recuerda el SAT•CBL•DTC, DVD, VCR•AUX). Esto le indica al control remoto el • Retire los obstáculos ubicados entre el control remoto y
Manual del Propietario del métodos a continuación.
• La Búsqueda Automática de Códigos recorre
SÍ: Oprima la tecla STOP. ¡Listo! La tipo de dispositivo—TV está configurada para buscar TV,
SAT•CBL•DTC para receptores de satélite, aparatos de cable
y garantizar así su máxima funcionalidad. Si no puede utilizar
alguna de las funciones, intente con otro código. Para obtener
para oprimir y sostener simultáneamente la tecla ON•OFF del
controles remotos originales
una vez programa este control
Para utilizar el sistema de guías o menús en pantalla de un dispositivo,
deberá primero poner el control remoto en el Modo Menú o Guía.
código, necesitará recuperar el código de cinco dígitos de cada uno dispositivo que debe manejar. el dispositivo. Asegúrese de apuntar el control remoto
tecla de dispositivo está programada. control remoto. de los dispositivos. Recuperar y anotar el código real le ahorrará directamente al sensor IR del dispositivo.
Control Remoto Universal automáticamente todos los códigos del dispositivo que desea
manejar. Éste es el método más fácil, pero a veces toma más NO: Oprima REVERSE nuevamente. El control remoto prueba el
o convertidores de TV digital, DVD para lectores de DVD, y
VCR•AUX para unidades VCR o DVR. Para programar una tecla
mayor información, consulte la sección “Cómo Probar el Código
para Obtener Máxima Funcionalidad” a continuación.
remoto para manejar los
componentes. La mayoría de
1. Asegúrese que sus dispositivos estén encendidos y que su
televisor se encuentre establecido en una entrada de dispositivo
tiempo si alguna vez necesita volver a programar el control remoto
(por ejemplo, si se pierde la programación cuando cambia las
• Retire los obstáculos ubicados entre el control remoto y el
dispositivo. Asegúrese de apuntar el control remoto directamente
Problema: El menú del dispositivo no aparece en la pantalla del
tiempo que algunos de los demás métodos de programación. las teclas de este control remoto al sensor infrarrojo del dispositivo.
próximo código en el grupo de códigos. de dispositivo para un tipo de dispositivo diferente, consulte la correcta (utilice la tecla INPUT para alterar entre las entradas televisor.
RCR412BZ / RCR412SZ / RCR412SIZ sección Cómo Cambiar el Tipo de Dispositivo de Una Tecla.
Durante la Búsqueda de Códigos por Marca, el control remoto tienen otras funciones. baterías). Si anota los códigos, puede utilizar el método de Entrada
• Asegúrese que las baterías estén cargadas y debidamente
• La Búsqueda de Códigos por Marca busca a través de los Continúe oprimiendo REVERSE cada 2 segundos hasta que el ignora la opresión de teclas que no son parte de la búsqueda. cuando se encuentre en el Modo TV.) Directa para volver a programar el control remoto a fin de manejar • Asegúrese de haber conectado debidamente el dispositivo al
La tecla ON•OFF iluminada sirve instaladas. Reemplace las baterías con dos baterías AA nuevas, de
códigos según la marca de dispositivos seleccionada. No es tan dispositivo se encienda. Cuando se encienda, oprima STOP. 2. Oprima la tecla de dispositivo cuyo menú desea accesar. otros dispositivos, un proceso rápido y sencillo. televisor y haber seleccionado la entrada correcta. (Consulte el
La tecla ON•OFF sirve de luz indicadora durante la La búsqueda se detendrá luego de dos minutos (la tecla ON•OFF de luz indicadora para ofrecer ser necesario (consulte la sección Instalación de las Baterías).
fácil como la búsqueda de códigos automática, pero muchas Manual del Propietario de los dispositivos para informarse sobre los
Aviso: Si oprime accidentalmente la tecla REVERSE luego de programación, ofreciéndole retroalimentación en cada etapa del parpadea cuatro veces y se apaga, y se retiene el último código retroalimentación. 3. Para lograr acceso a los menús, oprima la tecla MENU. Para
Owner’s Manual (English on back) veces puede ser más rápida.
que el dispositivo se encienda, oprima la tecla FORWARD. Luego, proceso. programado bajo la tecla de dispositivo). lograr acceso a las guías, oprima la tecla GUIDE. La tecla
La tecla ON•OFF 1. Oprima y sostenga la tecla de Problema: El control remoto no puede programarse para procedimientos de conexión correctos.)
• La Entrada Directa de Códigos le permite ingresar un dispositivo (TV, SAT•CBL•DTC, manejar su dispositivo. • Asegúrese que el control remoto se encuentre en el modo
espere dos segundos para ver si su dispositivo se vuelve a apagar. Para salir en cualquier momento de la Búsqueda de Códigos por La tecla ON•OFF parpadea cuatro veces y se apaga cuando Las teclas de dispositivo ON•OFF parpadea, lo cual indica que se encuentra en el Modo
código de la lista de códigos suministrada para la marca de su DVD, VCR•AUX) cuyo código desea correcto oprimiendo la tecla de dispositivo correspondiente (TV,
Marca sin guardar un código nuevo, oprima la tecla GO BACK. el control remoto ha recorrido todos los códigos. El control (TV, SAT•CBL•DTC, DVD, Menú o Guía. • Si está probando el control remoto mientras lo está
dispositivo. No es tan fácil como los otros métodos, pero es 3. Espere hasta que la tecla ON•OFF se ilumine y permanezca recuperar. La tecla ON•OFF se SAT•CBL•DTC, DVD, VCR•AUX). Esto le indica al control remoto el
remoto sale del método de Búsqueda de Códigos por Marca. VCR•AUX) ponen el control 4. Utilice las teclas VOL+/- y CH+/- para encenderá. Continúe oprimiendo la
programando, podría estar demasiado alejado del dispositivo
¡GUARDE ESTE MANUAL Y LAS LISTAS DE CÓDIGOS! posiblemente el más rápido. iluminada. Luego, suelte ambas teclas. remoto en el modo correcto o en un ángulo incorrecto. Deberá haber una trayectoria sin dispositivo que debe manejar.
NOTAS Si su dispositivo aún no se ha apagado, intente un método de navegar a través de la guía o el sistema tecla de dispositivo.
En ocasiones los controles remotos pierden su programación • La Búsqueda Manual de Códigos le permite recorrer 1. Encienda manualmente el para manejar el dispositivo. de menús en pantalla. Para seleccionar el obstáculos entre el control remoto y el sensor infrarrojo del • El acceso a los menús no es respaldado por todas las marcas.
A través de la programación de cada tecla, asegúrese de dispositivo que desea manejar.
búsqueda diferente. 4. Mantenga el control remoto apuntado directamente al panel
cuando se cambian las baterías. Asegúrese de mantener el manualmente todos los códigos del dispositivo que desea 4. Cuando haya ingresado el código de cinco dígitos, continúe frontal del dispositivo que desea manejar. Oprima la tecla La tecla de luz de fondo ( ) elemento resaltado, oprima la tecla OK. dispositivo. Acérquese más y asegúrese de apuntar directamente Posiblemente sea necesario utilizar el control remoto original para
manual y las listas de códigos en un lugar seguro de manera manejar. mantener el control remoto apuntado directamente al sensor oprimiendo la tecla de dispositivo y observe la tecla ON•OFF. al dispositivo que está intentando manejar. lograr acceso a las funciones de menú de algunos dispositivos.
Cómo Probar el Código para Obtener Máxima Funcionalidad ON•OFF del control remoto y espere 2 segundos. enciende y apaga la luz de fondo. CONSEJO: Si el control remoto no 2. Mientras sostiene la tecla de dispositivo, oprima y sostenga
que pueda volver a programar el control remoto de ser infrarrojo del dispositivo que está actualmente programando • Si está utilizando el método de programación de Entrada Para obtener mayor información, visite
¿Se iluminó la tecla ON•OFF? responde, verifique que la tecla ON•OFF la tecla INFO. La tecla ON•OFF se apagará. Luego de sostener
necesario. con el control remoto. 1. Pruebe una variedad de funciones del dispositivo con el control ¿Se apagó el dispositivo? GUIDE y MENU ponen el Directa para ingresar los códigos para su marca y la unidad
esté todavía parpadeando. La tecla ambas teclas durante tres segundos, la tecla ON•OFF se www.rcaaccessories.com
remoto. Si no puede utilizar alguna de las funciones de sus SÍ: ¡Listo! La tecla de dispositivo está programada. aún no funciona debidamente, intente el método de búsqueda
Consejo: Este control remoto ya está programado para la Búsqueda Automática de Códigos Pruebe el control remoto con el dispositivo para asegurarse que
dispositivos, vaya al próximo paso e intente un código diferente. SÍ: Oprima la tecla STOP para guardar control remoto en el modo ON•OFF desaparece al cabo de 20 encenderá nuevamente. Línea de Ayuda para el Cliente: 1-800-420-7968
la tecla de dispositivo esté programada con el código correcto No, parpadeó cuatro veces y se apagó: Ha ingresado un menú/guía, lo que hace que las automática, por marca o manual.
mayoría de televisores, VCR, lectores de DVD y receptores de La Búsqueda Automática de Códigos recorre automáticamente 2. Encuentre la marca del dispositivo ch
y garantizar así su máxima funcionalidad. Si no puede utilizar 2. Repita la Búsqueda de Códigos por Marca desde el comienzo. teclas CH/VOL sirvan de teclas
List
d Cod
Cuidado y Mantenimiento
Bran e.
Code
en la sección de Códigos por Marca vuelva a oprimir la tecla MENU o GUIDE, y
g usin User
está programada.
gos
satélite RCA. Sencillamente oprima la tecla correspondiente—
min in the
Códi
for outl ar utili ltado
used hod ram resa
met prog marcas,
es are Entry
a de
d Cod and s para de
alguna de las funciones, intente con otro código. Para obtener Cuando el dispositivo se apague por primera vez, no oprima la
Bran utili de códi
List
rca
mayor información, consulte la sección “Cómo Probar el Código tecla STOP, con la cual quedaría guardado el mismo código. En
Sharp
8
a las mismas funciones que las correspondientes individuales para manejar cada parte de
ng
y guardar el código.
Philips
JVC
RCA Insigni
a
4
3
El control remoto prueba el próximo • Utilice y almacene el control remoto únicamente en entornos de
GE Toshiba
PROSC
AN
2 onic
VCR
Symph
1 Sony
para Obtener Máxima Funcionalidad” a continuación. vez, con la unidad apagada, continúe oprimiendo la tecla ON•OFF
0 9
teclas de los controles remotos Cómo Salir del Modo Menú/Guía la unidad de combinación. Una vez programadas de manera
Sharp
8
temperatura normal.
RCA Samsu
ng
4
3
originales.
Samsu
8
NOTAS
PROSC
AN
2 LE AMNIO
Panaso
1 AB
ignora la opresión de teclas que no son parte de la búsqueda. 3. Si se vuelve a encender la unidad, habrá encontrado otro código
Generaents System
para receptores de satélite, aparatos de cable o convertidores de TV que puede manejar ese dispositivo. Oprima STOP. Recuerde ingresar el código para referencia futura en el dos funciones: pueden actuar • Asegúrese que las baterías estén cargadas y debidamente instaladas.
Paso 1: Instale las baterías digital, DVD para lectores de DVD, y VCR•AUX para unidades VCR
La búsqueda se detendrá luego de dos minutos (la tecla ON•OFF
recuadro provisto en la sección Recuperación de Códigos de apague. Cuando se apague, oprima
como teclas de navegación en
En esos momentos, el control remoto borra del televisor el menú
desplegado.
Aviso: Todos los códigos de TV comienzan con el número 1; todos • Limpie el control remoto con un paño húmedo de vez en cuando para
parpadea cuatro veces y se apaga, y se retiene el último código 4. Pruebe la funcionalidad de la tecla nuevamente intentando los códigos de VCR y DVR comienzan con el número 2; todos los mantenerlo en buenas condiciones de operación.
o DVR. Para programar una tecla de dispositivo para un tipo de programado bajo la tecla de dispositivo).
3. Oprima y sostenga la tecla de dispositivo que desea programar. una variedad de funciones. Si el código controla la mayoría
este manual. STOP.
los sistemas de menús y como Problema: El control remoto no ejecuta los comandos
códigos de lectores de DVD, con el número 3; y todos los códigos • Modificar o sabotear los dispositivos internos del control remoto podría
El control remoto necesita dos baterías alcalinas AA (las baterías dispositivo diferente, consulte la sección Cómo Cambiar el Tipo de A la vez que sostiene la tecla de dispositivo, utilice la otra mano Si la marca de su dispositivo no aparece en la lista de códigos, CONSEJO: Debido a la gran cantidad de códigos, quizás necesite controladores de canales y El modelo actual puede ser Si desea salir del Modo Menú usted mismo, oprima la tecla de debidamente.
de las funciones del dispositivo, entonces habrá concluido la de receptores de satélite, aparatos de cable y convertidores de TV ocasionar desperfectos y anular la garantía.
pueden estar incluidas o no, dependiendo de modelo). Dispositivo de Una Tecla. La tecla ON•OFF parpadea cuatro veces y se apaga cuando para oprimir y sostener simultáneamente la tecla ON•OFF del utilice uno de los métodos de Búsqueda de Códigos para diferente al ilustrado dispositivo correspondiente en el control remoto (TV, SAT•CBL•DTC,
programación. Si el código guardado no brinda una máxima oprimir la tecla ON•OFF varias veces-posiblemente cientos de veces. volumen fuera de los menús. • Asegúrese que el control remoto se encuentre en el modo
el control remoto ha recorrido todos los códigos. El control control remoto. DVD, VCR•AUX). La tecla ON•OFF se apagará. digital, con el número 5.
Para instalar las baterías: funcionalidad, intente otro código. programar el control remoto. (Consulte los métodos de Las teclas CH brindan además correcto oprimiendo la tecla de dispositivo correspondiente (TV,
Para salir en cualquier momento de la Búsqueda Automática de remoto sale del método de Búsqueda Automática de Códigos. Búsqueda Automática y Manual de Códigos) NOTAS control de salto hacia delante y 5. Repita el paso 4 hasta haber recuperado los cinco números del SAT•CBL•DTC, DVD, VCR•AUX). Esto le indica al control remoto el
Códigos sin guardar un código nuevo, oprima la tecla GO BACK. Si su dispositivo aún no se ha apagado, intente un método de código. Luego de recuperar el quinto número, la tecla ON•OFF Garantía Limitada Durante la Vida Útil del Producto
1. Retire la tapa del compartimiento de Si suelta la tecla de dispositivo en cualquier momento durante A través de la programación de cada tecla, mantenga el control salto hacia atrás para lectores dispositivo que debe manejar.
las baterías.
búsqueda diferente.
el proceso de Entrada Directa de Códigos, la tecla ON•OFF remoto apuntado directamente al sensor infrarrojo del dispositivo de DVD y DVR que respaldan Funciones Avanzadas parpadea brevemente, y luego se apaga.
• Asegúrese que el dispositivo se encuentre listo (por ejemplo, el
1. Encienda manualmente el parpadea cuatro veces, y se sale del proceso. Se retendrá el que está programando con el control remoto. esta funcionalidad. CONSEJO: Para salir del Modo de Recuperación de Códigos en
Voxx Accessories Corporation (la “Compañía”) le garantiza a usted,
dispositivo que desea manejar. Lector de DVD tenga un disco cargado). el comprador original de este producto que si, bajo condiciones y uso
2. Inserte las baterías, cerciorándose último código programado bajo la tecla de dispositivo.
Cómo Cambiar el Tipo de Dispositivo de cualquier momento, oprima la tecla GO BACK. normales, se encontrara que presenta defectos materiales o de mano de
Pruebe el control remoto con el dispositivo para asegurarse que GO BACK sale de la programación del control remoto; además, • Puede haber oprimido una tecla inválida para el modo en que se
de que las polaridades (+) y (–) Pruebe el control remoto con el dispositivo para asegurarse que obra durante su vida útil mientras sea de su propiedad, tales defectos
correspondan con el diagrama que Cómo Probar el Código para Obtener Máxima Funcionalidad Entrada Directa de Códigos la tecla de dispositivo esté programada con el código correcto
la tecla de dispositivo esté programada con el código correcto desempeña las mismas funciones que en los controles remotos Una Tecla Aviso: Si oprime una tecla inválida durante el proceso de encuentra el control remoto.
serán reparados o reemplazados (a opción de la Compañía) sin cargo
La Entrada Directa de Códigos le permite ingresar un código de la y garantizar así su máxima funcionalidad. Si no puede utilizar originales. Recuperación de Códigos, el control remoto no responderá. Si
aparece en el compartimiento de las 1. Pruebe una variedad de funciones del dispositivo con el y garantizar así su máxima funcionalidad. Si no puede utilizar • Si está tratando de ingresar directamente un número de canal, alguno por las piezas y labores de reparación.
lista de códigos suministrada para la marca de su dispositivo. No alguna de las funciones, intente con otro código. Para obtener Cada tecla de dispositivo está asociada a un tipo de dispositivo—TV no oprime una tecla de Recuperación de Códigos válida, (TV, intente oprimir la tecla OK luego de ingresar el número del canal ya
baterías. alguna de las funciones, intente con otro código de la lista. La tecla INPUT y — (guión) tiene tres funciones: (1) alterna entre Para obtener los servicios de reparación o reemplazo dentro de
2. Oprima y sostenga la tecla de dispositivo que desea programar.
control remoto. Si no puede utilizar alguna de las funciones del 4. Espere hasta que la tecla ON•OFF se ilumine y permanezca es tan fácil como los otros métodos, pero es posiblemente el más mayor información, consulte la sección “Cómo Probar el Código está configurada para buscar TV, SAT•CBL•DTC para receptores de SAT•CBL•DTC, DVD, VCR•AUX, INFO, GO BACK), la Recuperación que algunas marcas y modelos requieren esta acción.
dispositivo, vaya al próximo paso e intente un código diferente. todas las fuentes de video conectadas al televisor; (2) cuando el los términos de esta garantía, el producto se entregará con prueba
3. Vuelva a colocar la tapa del A la vez que sostiene la tecla de dispositivo, utilice la otra mano
iluminada. Luego, suelte ambas teclas.
rápido. para Obtener Máxima Funcionalidad” a continuación. control remoto se encuentra en el modo VCR, este botón alterna
satélite, aparatos de cable o convertidores de TV digital, DVD para de Códigos se detendrá al cabo de 15 segundos. La tecla ON•OFF de cubierta de garantía (por ejemplo, factura fechada de venta),
compartimiento de las baterías en su lectores de DVD, y VCR•AUX para unidades VCR o DVR. A fin de parpadea cuatro veces y luego se apaga. • Existe la posibilidad de que un código programado pueda manejar
para oprimir y sostener simultáneamente la tecla ON•OFF del 2. Repita la Búsqueda Automática de Códigos desde el comienzo. Durante la Búsqueda Manual de Códigos, el control remoto ignora entre la entrada VCR y TV; (3) cuando ingresa directamente únicamente algunas de las funciones del dispositivo (por ejemplo, especificación de los defectos, transporte prepagado, a una estación de
posición. programar estas teclas para manejar un tipo de dispositivo diferente, garantía aprobada. Para ubicar la estación de garantía más cercana a su
control remoto. Cuando su dispositivo se apague, no detenga la búsqueda. En la opresión de teclas que no son parte de la búsqueda. números de canales digitales, este botón le permite separar el
5. Fíjese en el número que marcó para CONSEJO: Cada tecla de dispositivo está asociada a un tipo de tendrá que reasignarlas primero. sólo enciende y apaga un dispositivo). Para confirmar que la tecla
domicilio, llame sin costo a nuestra oficina de control: al 1-800-645-4994.
vez, con la unidad apagada, continúe oprimiendo la tecla PLAY el número de código de la marca del dispositivo—TV está configurada para buscar TV, SAT•CBL•DTC La búsqueda se detendrá luego de dos minutos (la tecla ON•OFF número del canal principal del número del canal secundario (tal CÓDIGO DE TV CÓDIGO SAT•CBL•DTC de dispositivo ha sido programada con el código correcto para
cada 5 segundos hasta que la unidad se vuelva a encender. como 59.1). Cómo Reasignar la Tecla VCR•AUX para Manejar Otros obtener máxima funcionalidad, pruebe el dispositivo. Intente Esta Garantía no cubre un producto adquirido, mantenido o utilizado
Precauciones sobre las Baterías: dispositivo. Oprima dicho número en el para receptores de satélite, aparatos de cable o convertidores de TV parpadea cuatro veces y se apaga, y se retiene el último código fuera de los Estados Unidos o Canadá.
teclado del control remoto. digital, DVD para lectores de DVD, y VCR•AUX para unidades VCR Dispositivos manejar una variedad de funciones del dispositivo con el control
• No combine baterías nuevas y viejas. 3. Cuando se vuelva a encender la unidad, oprima la tecla
programado bajo la tecla de dispositivo).
IMPORTANTE 1 5 Esta Garantía no es transferible y no incluye los costos incurridos en la
• No combine diferentes tipos de baterías: alcalinas, estándar
o DVR. Para programar una tecla de dispositivo para un tipo de Búsqueda Manual de Códigos La tecla ON•OFF parpadea cuatro veces y se apaga cuando
La tecla VCR•AUX viene preestablecida de fábrica para manejar una remoto. Si algunas de las funciones de sus dispositivos no trabajan,
instalación, remoción o reinstalación de este producto. Esta Garantía no
REVERSE en el control remoto cada 2 segundos hasta que el dispositivo diferente, consulte la sección Cómo Cambiar el Tipo DVR o VCR. Si desea que la tecla VCR•AUX maneje un dispositivo intente programar el control remoto con un código diferente en la
(carbón-zinc) o recargables (níquel-cadmio). La Búsqueda Manual de Códigos le permite recorrer uno por uno el control remoto ha recorrido todos los códigos. El control Dado que este control remoto maneja más de un dispositivo, aplica si, es opinión de la Compañía que, este producto ha sufrido daños
dispositivo se vuelva a apagar. Cuando el dispositivo se vuelva de Dispositivo de Una Tecla. diferente (por ejemplo, TV, Lector de DVD, receptor de satélite, lista a través del Método de Entrada Directa de Códigos hasta que
• Siempre remueva de inmediato baterías viejas, débiles o todos los códigos del dispositivo que desea manejar. Cuando remoto sale del método de Búsqueda Manual de Códigos. Si deberá primero “indicarle” al control remoto cuál dispositivo SAT CABLE CONVERTIDOR DE DTV debido a alteraciones, instalación inadecuada, abuso, uso indebido,
a apagar, oprima la tecla STOP. aparato de cable o convertidor de TV digital adicional), deberá encuentre el código que le permita al control remoto manejar la
desgastadas, y recíclelas o deséchelas según lo disponen las La tecla ON•OFF sirve de luz indicadora durante la programación, encuentre el que maneja su dispositivo, puede detener la búsqueda y su dispositivo aún no se ha apagado, intente un método de desea manejar. En otras palabras, si desea manejar el televisor, negligencia, accidente o el uso simultáneo de baterías de tipos diferentes
volver a reasignarla. mayoría de las funciones del dispositivo. Diferentes códigos pueden (p.ej., alcalinas, estándar o recargables).
guardar el código. deberá primero oprimir la tecla TV para poner el control remoto
normas locales y nacionales. 4. Nuevamente, pruebe la funcionalidad de la tecla intentando 6. Mantenga el control remoto apuntado ofreciéndole retroalimentación en cada etapa del proceso. búsqueda diferente.
CÓDIGO DVD CÓDIGO DE VCR•AUX
proporcionar diferentes niveles de funcionalidad.
EL ALCANCE DE LA RESPONSABILIDAD DE LA COMPAÑÍA
3. Espere hasta que la tecla ON•OFF se ilumine y permanezca controlar una variedad de funciones del dispositivo. Si el código en el Modo TV. El control remoto permanece en ese modo de 1. Oprima y sostenga la tecla VCR•AUX. La tecla ON•OFF se
directamente al panel frontal del BAJO ESTA GARANTÍA ESTÁ LIMITADO A LA REPARACIÓN O EL
iluminada. Luego, suelte ambas teclas. que se ha almacenado controla la mayoría de las funciones del CONSEJOS: La tecla ON•OFF sirve de luz indicadora durante la dispositivo hasta que oprima una tecla de dispositivo diferente. encenderá.
dispositivo que desea manejar. Oprima Cómo Probar el Código para Obtener Máxima Funcionalidad Problema: La tecla ON•OFF no se ilumina cuando oprime una REEMPLAZO PROVISTO ARRIBA Y, EN NINGÚN CASO, DEBERÁ LA
Ahorro de Batería Por ejemplo, si el control remoto se encuentra en el Modo
dispositivo, entonces habrá concluido la programación. Si el código la tecla ON•OFF y espere 2 segundos. 1. Encienda manualmente el dispositivo programación, ofreciéndole retroalimentación en cada etapa del
1. Pruebe una variedad de funciones del dispositivo con el TV y desea manejar el Lector de DVD, deberá oprimir la tecla
2. Mientras sostiene la tecla VCR•AUX, oprima y suelte la tecla 3 tecla. RESPONSABILIDAD DE LA COMPAÑÍA EXCEDER EL PRECIO DE COMPRA
guardado no brinda una máxima funcionalidad, intente otro código. El control remoto está probando un proceso. numérica en el teclado para el dispositivo que desea manejar
Su control remoto universal ahorra la potencia de las baterías al 4. Mantenga el control remoto que desea manejar. control remoto. Si no puede utilizar alguna de las funciones del VCR•DVD para cambiar los modos de dispositivo. • Puede haber oprimido una tecla inválida para el modo en que se PAGADO POR EL COMPRADOR DE ESTE PRODUCTO.
apagar automáticamente cualquier tecla que se oprima por más apuntado directamente al panel código para la marca del dispositivo. Cada tecla de dispositivo está asociada a un tipo de dispositivo— dispositivo, vaya al próximo paso e intente un código diferente. (consulte la tabla abajo). La tecla ON•OFF se apagará. Esta Garantía reemplaza cualesquiera otras responsabilidades o
DVR/VCR LECTOR DE DVD encuentra el control remoto.
de 60 segundos. Esta acción prolonga la vida útil de las baterías frontal del dispositivo que desea TV está configurada para buscar TV, SAT•CBL•DTC para garantías expresas. CUALESQUIERA GARANTÍAS IMPLÍCITAS,
2. Repita el Método de Búsqueda Manual de Códigos desde el CONTROLES DE TECLA VCR•AUX:
TV SAT•CBL•DTC
• Asegúrese que el control remoto se encuentre en el modo
en caso de que el control remoto quede pillado en un lugar donde manejar. Oprima la tecla PLAY del receptores de satélite, aparatos de cable o convertidores de TV INCLUYENDO CUALQUIER GARANTÍA IMPLÍCITA DE COMERCIABILIDAD
comienzo. Cuando haya encontrado el código que vuelva a
las teclas permanezcan oprimidas, tal como entre los cojines de un control remoto y espere 5 segundos. digital, DVD para lectores de DVD, y VCR•AUX para unidades VCR
encender el dispositivo, no oprima la tecla STOP, con la cual Luz de fondo TV adicional oprima 1 correcto oprimiendo la tecla de dispositivo correspondiente (TV, O ADAPTABILIDAD PARA UN PROPÓSITO EN PARTICULAR ESTARÁN
sofá. ¿Se apagó el dispositivo? o DVR. Para programar una tecla de dispositivo para un tipo de SAT•CBL•DTC, DVD, VCR•AUX). Esto le indica al control remoto el LIMITADAS A LA DURACIÓN DE ESTA GARANTÍA. EN NINGÚN CASO
El control remoto está probando quedaría guardado el mismo código. En vez, con la unidad La iluminación de fondo le ayuda a ver mejor las teclas del control VCR o DVR oprima 2 LA COMPAÑÍA SERÁ RESPONSABLE POR DAÑOS EMERGENTES O
dispositivo diferente, consulte la sección Cómo Cambiar el Tipo dispositivo que debe manejar.
un grupo de 10 códigos para el SÍ: Oprima la tecla STOP para guardar el código. ¡Listo! La tecla 2. Encuentre la Lista de Códigos de Dispositivo de Una Tecla.
apagada, continúe oprimiendo la tecla ON•OFF repetidamente remoto en la oscuridad. Puede encender y apagar la iluminación
Lector de DVD adicional oprima 3 INCIDENTALES. Ninguna persona ni representante está autorizado a
dispositivo. hasta que la unidad se vuelva a encender. • Asegúrese que las baterías estén cargadas y debidamente
ch
de dispositivo está programada. de fondo oprimiendo la tecla de luz de fondo ( ). La luz de fondo
List
asumir, a nombre de la Compañía, ninguna responsabilidad salvo la
d Cod
Bran e.
g the ’s Guid
Code
g usin User
gos
min in the o
ram zand
prog ined
Códi
for outl ar utili ltado
a de
Receptor de satélite, aparato de cable oprima 5
d Cod and s para de
List
son rio. rca
cas entrada usua Ma
teclas y se apaga seis segundos luego de la última opresión de Algunos estados/provincias no permiten limitaciones sobre la duración
Sharp
8
y localice la marca en esa sección. de una garantía implícita o la exclusión o la limitación de daños
Sony
4. Nuevamente, pruebe la funcionalidad de la tecla intentando 3. Suelte la tecla VCR•AUX. La tecla ON•OFF parpadea cuatro veces
Philips
5
controlar una variedad de funciones del dispositivo. Si el código y luego se apaga. La tecla VCR•AUX está ahora configurada para
Magna
dispositivo se apague. Cuando se apague, oprima STOP. o exclusiones anteriores no se apliquen en su caso. Esta Garantía le
RCA
GE 3 nic
PROSC
AN
2 LE AMNIO
Panaso
Directa de Códigos.
Network/ Instrum
Dish
Systems r
5
Continúe oprimiendo PLAY cada 5 segundos hasta que el dispositivo, entonces habrá concluido la programación. Si el 4. Observe las instrucciones de la búsqueda de códigos automática, disfrutar además de otros derechos.
Para salir en cualquier momento de la Búsqueda Manual de
dispositivo se apague. código guardado no brinda una máxima funcionalidad, intente por marca, manual o entrada directa para programar la tecla
Códigos sin guardar un código nuevo, oprima la tecla GO BACK.
otro código. VCR•AUX.