Catalogue HY11-2500/UK Power Amplifiers

Characteristics Series VRD350 and VRD355

General
The power amplifier of the series VRD350/355 provides
the control of proportional directional valves, pressure
valves, and throttle valves and are suitable for solenoid
systems of up to 3.5 A. Valves with feedback as well as
external closed loops (e.g., pressure control circuits) can
be achieved with the controlled designs.
The cost-effective design of the digital amplifier card with-
out front display and operating elements is parameterised
via the series interface or the snap-on operator control
unit ABG35S.
The operator control unit ABG35S must be ordered sepa-
rately (order number HR 23.501.546).

Features
• Digital amplifier card with double PWM output stage.
• Digital, reproducible input of command signals, ramps,
and parameters.
• Integrated measuring device funtions.
• Resolution of the command and actual values ≤0.5‰.
• RS232 interface available on the front plate. The features are available thanks to microprocessor tech-
• Integrated feedback value adjustment for closed loop. nology. The microprocessor assumes the regulation as
• No drift due to temperature influences or component well as the control functions. The system features are
aging. essentially determined by the software.
• Simple operation using 4 buttons (VRD355 only with
Note
ABG35S).
The DOS user software PROVRD350/355 is available for
free download on our internet page www.parker.com/
euro_hcd or may be ordered under ordering code HR
59500010.
Block Diagram

10

VRD35X.PM6.5 RH

10-30
Catalogue HY11-2500/UK Power Amplifiers
Ordering Code Series VRD350 and VRD355

Ordering Code

VRD

Digital Module Type Solenoid Solenoid/ Function Sensor External Design

amplifier type sensor- assignment closed loop series
for version
proportional
valves

Code Module Code Ext. closed loop*

with front plate 0 without
350 display / and 0 0...±10V
operating elements 1 4...20mA
without front plate 2 0...20mA
355 display / and
operating elements * The values for actual
value signals apply to di-
rectional valves
Code Type
Code Sensor assignment
0 open loop
1 closed loop 01) controlled
12) Flow valves NG6
22) Directional valves NG6
Code Solenoid type 32) Directional valves NG10
1 0.8A 42) Directional valves NG16
52) Directional valves NG25
3 2.7A
62) Directional valves NG32
5 3.5A 71) ext. closed loop (DC valves)
2.7A (RLL-central 81) ext. closed loop (press./ flow valves)
7
threaded solenoid) 92) Directional valve D91FS
1)
without feedback on valve
Solenoid / 2)
with feedback on valve
Code
sensor version
Flange solenoids
(or pos. transducer Code Function
0
with 6V
(zero voltage) - open loop
central threaded R closed loop
solenoids (or pos.
1
indicator with
7.5V zero voltage)

Assignment Table
Proportional DC valves Amplifier card for valves
without with without pos. transducer,
Type Description Solenoid Size
position transducer position transducer with ext. closed loop
10
DC Valves D*1FW L 10...32 VRD35*-030-00 - VRD35*-130-R7*
D*1FS L 10...32 - VRD35*-130-R*0 -
RLL G09 6 VRD35*-071-00 VRD35*-171-R20 VRD35*-171-R7*
WLL G09 6 VRD35*-031-00 VRD35*-131-R20 VRD35*-131-R7*
WLL - 10 VRD35*-050-00 VRD35*-150-R30 VRD35*-150-R7*
Pressure VB - 6 VRD35*-010-00 - VRD35*-110-R8*
Valves VBY - 6...10 VRD35*-010-00 - VRD35*-110-R8*
VMY - 6...10 VRD35*-010-00 - VRD35*-110-R8*
Flow Valves DUR - 6 VRD35*-010-00 VRD35*-110-R10 VRD35*-110-R8*

VRD35X.PM6.5 RH

10-31
 Catalogue HY11-2500/UK Power Amplifiers
Characteristics Series VRD350 and VRD355

Technical Data

General
Design European format

Electrical
Supply voltage [V] 18...30, ripple < 5%
Current consumption [A] 3
Power consumption (24V) [VA] 50
Pre-fuse [A] 3.15, quick acting

Inputs
Analogue Feedback value [V] 6 ±2, 600 KOhm
Feedback value [V] 7,5 ±2, 600 KOhm
Feedback value [V] 0...10, > 10 KOhm
Feedback value [V] 0...±10, > 10 KOhm
Feedback value [mA] 0...20, 100 KOhm
Feedback value [mA] 4...20, 100 KOhm
Command value 5/6 [V] 0...±10, > 150 KOhm
Digital 0 [V] 0...1
1 [V] 3...30

Outputs
Ext. supply voltage [V] 24 ±10%, ripple <5%
Reference [V] +10, -10, 10mA
Analogue [V] 0...10, 5 mA
Digital [mA] 50
Solenoids [A] 0.8 / 2.7 / 3.5

Interfaces
Serial RS 232C

Adjustment range
Min [%] 0...100
Max [%] 0...100
Ramp time [s] 0...39.5
Dither Amplitude [%] 0...30
Frequency [Hz] 0...647, in steps
Zero point [%] -30...+30

Protection
Industrial protection class IP00

Environment
Temperature [°C] 0...50

10 Connection
Plug connector DIN 41612, 48 pin design type F

Dimensions
Front plate [mm] 50.5 x 128.4, 10TE/3HE
Printed circuit board [mm] 100 x 160

VRD35X.PM6.5 RH

10-32
Catalogue HY11-2500/UK Power Amplifiers
Signal flow Series VRD350 and VRD355

Signal Flow Diagram

Open Loop Operation

External Closed Loop Control

10

VRD35X.PM6.5 RH

10-33