Scribd
Upload
21 views2 pages

Assignment 1

The document contains 6 questions about scattering parameters and ABCD matrices of various circuits. Question 1 asks to find the scattering parameters S11 and S21 of a 3dB attenuator circuit. Question 2 gives a scattering matrix and asks about the properties of the network and return losses. Question 3 provides port voltages and currents and asks to determine the input impedances seen at each port. Question 4 asks for the scattering parameters S11 and S21 of series and shunt load circuits. Question 5 provides a scattering matrix of a 4-port network and asks about its properties and parameters between ports. Question 6 asks to find the ABCD matrix of a given circuit.

Uploaded by

Veda Vyas Potnuru
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
21 views2 pages

Assignment 1

The document contains 6 questions about scattering parameters and ABCD matrices of various circuits. Question 1 asks to find the scattering parameters S11 and S21 of a 3dB attenuator circuit. Question 2 gives a scattering matrix and asks about the properties of the network and return losses. Question 3 provides port voltages and currents and asks to determine the input impedances seen at each port. Question 4 asks for the scattering parameters S11 and S21 of series and shunt load circuits. Question 5 provides a scattering matrix of a 4-port network and asks about its properties and parameters between ports. Question 6 asks to find the ABCD matrix of a given circuit.

Uploaded by

Veda Vyas Potnuru
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

1.

Find the scattering parameters, (i) S11 and (ii) S21 of the 3dB attenuator (with a 50 Ω
characteristic impedance) circuit shown in Figure:

2. A two-port network is known to have the following scattering matrix:

0.12∠0° 0.75∠ − 45°


[S] =[ ]
0.75∠45° 0.25∠0°

(i) Is the network Lossless? (Yes/No)


(ii) Is the network Reciprocal? (Yes/No)
(iii) If port 2 is terminated with a matched load, what is the return loss seen at port 1?
(iv) If port 2 is terminated with a short circuit, what is the return loss seen at port 1?

3. A two-port network is driven at both ports such that the port voltages and currents have
the following values (Z0 = 50 Ohm):

V1 = 25∠90° I1 = 0.5 ∠90°


V2 = 16∠0° I2 = 0.32∠ − 90°

Determine the input impedance seen at each port:


(1)
(i) 𝑍𝑖𝑛
(2)
(ii) 𝑍𝑖𝑛

4. Find the scattering parameters S11 and S21 for the series and shunt loads shown below.
(i)

(ii)
5. A four-port network has the scattering matrix shown as follows.

(a) Is this network lossless? Yes/No


(b) Is this network reciprocal? Yes/No
(c) What is the return loss at port 1 when all other ports are terminated with
matched loads?
(d) What is the insertion loss and phase delay between ports 2 and 4 when all other
ports are terminated with matched loads?
(e) What is the reflection coefficient seen at port 1 if a short
circuit is placed at the terminal plane of port 3 and all other ports are terminated with
matched loads?

6. Find the ABCD matrix of the circuit shown below:

You might also like