®

Isoplast 302EZ ETP

Type: Isoplast® 302EZ ETP is an Engineering Thermoplastic Resin.

English S.I.
Typical Properties Test Method
Values* Units Values* Units
Specific Gravity D792 1.20 - 1.20 -
Water Absorption @ 73° (23° C), 24hrs D570 - % - %
Mold Shrinkage D955 0.004-0.006 in/in 0.004-0.006 mm/mm
Optical Properties
Light Transmission D1003 88 % 88 %
Gardner Gloss, 60° D823 - % - %
Mechanical Properties
Tensile Modulus D6381 280,000 psi 1,930 MPa
Tensile Strength at Yield D638 12,000 psi 83 MPa
Tensile Strength at Break D638 10,000 psi 69 MPa
Elongation at Yield D638 9 % 9 %
Elongation at Break D638 90 % 90 %
Flexural Modulus D790 330,000 psi 2,270 MPa
Flexural Strength D790 14,000 psi 97 MPa
Notched Izod Impact Strength
@ 73°F (23°C) D2562 2 ft-lb/in 107 J/m
@ -40°F (-40°C) D256 1.1 ft-lb/in 59 J/m
Instrumented Dart Impact energy (total Energy)
@ 73°F (23°C) D37633 600 in/lb 68 J
@ -20°F (-29°C) D3763 - in/lb - J
Rockwell Hardness D785 - - - -
Thermal Properties
HDT @66 psi (0.45 MPa) - unannealed D6484 270 °F 132 °C
@66 psi (0.45 MPa) - annealed D648 290 °F 143 °C
@264 psi (1.8 MPa) - unannealed D648 240 °F 116 °C
@264 psi (1.8 MPa) - annealed D648 280 °F 138 °C
Vicat Softening Temperature D1525 297 °F 147 °C
Coefficient of Linear Thermal Expansion
-40°F to 180°F (-40°C to 82°C) D696 3.2 10-5 in/in/°F 5.8 10-5 mm/mm/°C
Processing Information
Recommended Drying Temperature 260-280 °F 127-138 °C
Recommended Melt Temperature 460-500 °F 238-260 °C
Recommended Mold Temperature 200-250 °F 93-121 °C

*Typical values, not to be construed as specifications. Users should confirm results by their own tests. July 2015
1 3
D 638; Type I;2 in/min (51 mm/min) D 3763; 0.125 in; 8,000 ipm (3.2 mm; 203 m/min)
2 4
D 256; 0.125in; 10 mil notch (3.2mm; 0.25 mm notch) D 648; 0.125 in (3.2 mm)

The information contained herein is believed to be reliable, but no representations, guarantees or warranties of any kind are made as to its accuracy, suitability for particular applications or the results to be obtained.
The information often is based on laboratory work with small-scale equipment and does not necessarily indicate end product performance or reproducibility. Formulations presented may not have been tested for
stability and should be used only as a suggested starting point. Because of the variations in methods, conditions and equipment used commercially in processing these materials, no warranties or guarantees are
made as to the suitability of the products for the applications disclosed. Full-scale testing and end product performance are the responsibility of the user. Lubrizol Advanced Materials, Inc. shall not be liable for and
the customer assumes all risk and liability for any use or handling of any material beyond Lubrizol Advanced Materials, Inc.’s direct control. The SELLER MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Nothing contained herein is to be considered as permission, recommendation nor as an
inducement to practice any patented invention without permission of the patent owner.

Lubrizol Advanced Materials, Inc. / 9911 Brecksville Road, Cleveland, Ohio 44141-3247 / 216.447.5000
© 2015 The Lubrizol Corporation. All rights reserved. All marks are the property of The Lubrizol Corporation • www.lubrizol.com/engineeredpolymers