CEILING

DIFFUSER CHAPTER 1
 LOUVRED FACE, MULTI DIRECTIONAL
CEILING DIFFUSERS WITH REMOVABLE CORE

CONTENTS
01 Introduction, Features & Characteristics, Operating Range.
TFE multi directional diffusers represent an optimum
02 Pattern Selection, Selection Procedure.
solution for the diffusion of air from ceiling in modern Easy:
concept areas with a high use of extruded aluminum - Installation.
03 Different Core Pattern Arrangements.
with which thanks for their precise line they harmonize -Adjustment of key operated OBD.
perfectly. The different shape of the cones (core) in - Maintenance.
04 - 05 Square Diffusers -Model4WS, Construction & Dimensional Details. respect of the number of the air flows (1, 2, 3 & 4 ways) - Core exchange by different pattern in future. The
can itself create an aesthetic element to be utilized. core is held in place & fixed to the frame by two
06 - 08 Diffuser Accessories. loaded spiral galvanized steel springs.

09 Mounting Instructions.
Features & Characteristics: • The ceiling diffuser projects from the mounting surface
• Material: Frame & inner cones (core) are made of by 5mm.
Extruded Aluminum Profiles of 6063 Alloy by which • Recommended for use in rooms with ceiling heights
10 Effective Area Valves. allow the diffusers to be suitably used for both internal ranging from 2.5 m to 4.0m.
& external applications. • Accessories: see page No. CD-06, 07 & 08.
11 Selection Diagrams for Square Diffusers. • Both frame & inner cones (core) have a general wall • Mounting Installations: see page No. CD-09.
thickness of 1.5 mm (± 0.2 mm tolerance). • Surface Finishes: see page No. CD-21.
12 Selection Diagrams for Rectangulat Diffusers. • Available in both square & rectangular shapes.
• Units are flush mounted & available with different
13 -16 Tabular Selection for Square Diffusers. pattern arrangements 1, 2, 3 & 4 ways (i.e. different
ways of air discharge directions).
17 - 20 Tabular Selection for Rectangular Diffusers. • Available in wide variety of standard neck sizes
ranging from 150 x 150 up to 600 x 600 mm in 75 mm
21 Ordeirng Data. increments.
• The inner cones (core) is fully removable to provide

CEILING DIFFUSERS 3
 DIFFERENT CORE PATTERNS ARRANGEMENTS
FOR BOTH SQUARE & RECTANGULAR DIFFUSERS

SQUARE DIFFUSERS

Pattern Selection:
The pattern selection is determined by the shape of the
space to be conditioned, the number of diffusers in it,
and the type and the location of lighting fixtures or
other devices mounted on the same ceiling. MODELS:
For Example: a two way square diffuser, opposed blades 4WS: 4 Way Square Diffuser.
Model 2WS-O might be used in corridor areas. On the 3WS: 3 Way Square Diffuser.
other hand a larger area can often be divided into 2WS-O: 2 Way Square Diffuser, Opposed Blades.
squares or rectangles of nearly equal areas, if a diffuser 2WS-C: 2 Way Square Diffuser, Comer Blades.
can be located in the center of each of these areas, a 1WS: 1 Way Square Diffuser.
pattern of Model 4WS (for square areas) or 4WR (for
rectangular areas) could be used for four way discharge.

RECTANGULAR DIFFUSERS

Selection Procedure:
Having established the position where terminals can
be sited, refer to data showing core pattern details and
select the suitable core pattern required.
Knowing the air volume and throw for each diffuser in
Question then check:

• Recommended limit of air flow rate for each

diffuser direction according to ceiling height (table CD-
02) with throw of air required lying between the max.
MODELS:
and min. values. 4WR: 4 Way Rectangular Diffuser.
• Note Noise Level from performance data diagrams and 3WR: 3 Way Rectangular Diffuser.
check the same with Noise Level recommendations 2WR-H: 2 Way Rectangular Diffuser, Horizontal Blades.
table. 2WR-V: 2 Way Rectangular Diffuser, Vertical Blades.
• Determine the total pressure drop from performance l WR-H: l Way Rectangular Diffuser, Horizontal Blades.
data. 1WR-Y: l Way Rectangular Diffuser, Vertical Blades.

4 CEILING DIFFUSERS 5
Square Diffusers - Model 4WS
Construction and Dimensional Details

Supply Air Difuser c/w Opposed Blade Damper, Model SAD 4WS Supply Air Diffuser c/w Opposed Blade Damper
and Equilizing Grid , Model SAD 4WS + EG

• Diffusers called Supply Air Diffuser and coded as SAD are allways equipped with Opposed Blade Damper
(provided as standard).

• The Equalizing Grid is available on request as an option. • The blades spaced on 20 mm centres, help to control
• The assembly of Equalizing Grid with diffuser provides the air flow in a linear manner.
uniform air flow and distribution over the neck of the • Individually adjustable blades allow minor adjustments
Return,Extract or Exhaust Air DiHuser w/o Opposed diffuser which ensures reduction in pressure losses, of air flow and additional control when required (blades
Blade Damper,Model RAD or EAD 4WS noise level and turbulence. can be deflected into different degrees).

NECK & OVERALL DIMENSIONS FOR SQUARE DIFFUSERS

• Unless otherwise specified,Diffusers called • In some cases RAD or EAD are required with Opposed
Return,Extract or Exhuast Air Diffuser and coded as Blade Damper, this will be provided as an option.
RAD or EAD are usually supplied w/o Opposed Blade • All dimensions are in mm and subject to±1 mm
Damper as a standard. tolerance.
• The 18" x 18" diffuser can be replaced on false ceiling • All dimensions are in mm and subject to ±1 mm
with modules of 600 x 600 mm panel. tolerance.
• Other sizes are available on request.

6 CEILING DIFFUSERS 7
A. Opposed Blade Damper B. Equalizing Grid (Optional)

• Frame and Blades are of high quality Extruded the diffuser and fixed to it by means of II S II clips. • Frame and Blades are of high quality Extruded • Usually standard surface finish is Aluminium in
Aluminium Profiles construction. • Blades are separated from its frame by nylon bushes. Aluminum Profiles construction. Mill Finish. Matt black powder coating color is also
• Blades are designed to rotate opposite to This method of assembly provides maximum rattle - • The aero foil blades are separated from it`s frame by available on request (as an option).
each other. free performance and eliminates corrosion. nylon bushes. • For further details, refer to page no. CD-05.
• The specially designed blades have an overlapping lip • Usually damper standard surface finish is Aluminium
which assures a tight closure. in Mill Finish.Matt black powder coating color is also
• Generally, the opposed blade damper is attached to available on request (as an option).

Opposed Blade Damper-Screw Type Operation (Standard)

C. Foam Type Rubber Gasket (Optional)

• The range from full open to full closed position of
damper blades can be easily adjusted by a screw driver
after removing the inner core as shown in the figure.

Opposed Blade Damper - Lever Type Operation (Optional)

Gasket Type : Single Sided Self-Adhesive Foam. • To be applied around the perimeter of the back side
Gasket Function : Sealing. of the diffuser to act as an air seal to prevent
Gasket Benefits : pressurised air from escaping from the sides of the
-Stops diffuser rattling. diffuser when fixed to the ceiling.
-Minimize air infiltration.
-Stops leaks and pressure losses.
-Takes up unevenness of ceiling.
- Easy to apply on site or in factory.
• In this case, blades adjustment can be easily done by
lever accessible through the face of diffuser without • All dimensions are in mm and subject to ±1mm
removing inner core as shown in the figure. tolerance.

8 CEILING DIFFUSERS 9
D. Neck Adaptor (Optional) Mounting Instructions
Installation With Connectin To Duct
Neck Adaptors that are field installed to allow either easy connection to Square duct, or easy
connection to Flexible or Round rigid duct.

Extract the inner core of the diffuser by pushing

laterally with respect to the pressure spring until the
opposite side emerges from the external frame. Fix
the neck of the diffuser to the duct using screws or
rivets. Re-mount the inner core inside the frame
inserting the pressure springs in their seats and
pushing laterally until the opposite parts fix home
align the central cones to the frame.

Installation With Suspended Supply Plenum Box

• Applications : The use of the supply plenum is optimum with any
For those projects using square duct connections to type of false ceilings. It is possible to fix the supply
the air outlets, the Square to Square Neck Adaptors are plenum in the desired position by anchoring it to
available for all square diffuser sizes. Adaptor design the system with wires. Make connections to the air
provides suitable and easy Neck to Duct connection. distribution systems using spiral or flexible duct
On the other hand, those projects using flexible or ensuring the seal and then allowing for ceiling
round rigid duct connections to the air outlets, the diffuser installation and architectural finalities prior
Square to Round Neck Adaptors are available for all to install and regulate the damper.
square diffuser sizes. Adaptor design provides suitable
and easy Neck to Duct connection. • Material:
24 Gauge Galvanized steel
construction.

• Surface Finishes:
Mill galvanized as a standard or matt
Installation With Diffuser Resting In False Ceiling
black coated from inside only as an
option.
In this case it is sufficient to rest the diffuser in the
• Fixing Method: space reserved for the ceiling panel and connect it
Adaptor fixed to the back side of the to the ducting. The internal parts of the diffuser will
diffuser by rivets. remain approachable by extracting the central core as
explained previously.
• Design and Sizes:
Refer to illustrative sketches
and table No. CD-04 below for
dimensional data:

10 CEILING DIFFUSERS 11
Engineering and Performance Data

Effective Area Values for Square Ceiling Diffusers in (m2) Selection Diagrams for 1,2,3 & 4 Way
Rectangular Ceiling Diffuser

Effective Area Values for Rectangular Ceiling Diffusers (m2)

12 CEILING DIFFUSERS 13
14
Rectangular Ceiling Diffuser
Selection Diagrams for 1,2,3 & 4 Way
Engineering and Performance Data

C E IL ING DIF F US E R S S A D,R A D

P E R F OR MA NC E DATA - S UP P LY

*S I UNIT S
S IZE An Ak Vn 1.016 1.270 1.524 1.778 2.032 2.540 3.048 3.556 4.064
L /S 89 111 133 155 177 221 266 310 354
375x225 0.087 0.033 Pt 0.395 0.616 0.914 1.205 1.651 2.515 3.658 4.978 6.502
Th 1.8-2.7-4.5 2.4-3.0-5.7 2.7-3.9-6.9 3.3-4.5-7.2 3.6-5.1-7.8 7.2-5.7-8.7 5.1-6.3-9.6 5.7-6.9-10.5 6.6-7.8-11.4
NC <15 15 17 20 24 30 34 38 42
L /S 94 118 142 165 189 236 283 330 378
300x300 0.093 0.033 Pt 0.356 0.533 0.787 1.067 1.397 2.159 3.150 4.242 5.563
Th 1.8-2.7-5.4 2.1-3.3-6.3 2.7-3.9-7.2 3.3-4.8-7.8 3.6-5.4-8.1 4.5-6.3-9.0 5.4-7.2-9.9 6.3-7.8-10.8 6.9-8.1-11.4
NC <15 <15 <15 16 19 25 32 36 40
L /S 94 118 142 165 189 236 283 330 378
600x150 0.093 0.033 Pt 0.395 0.616 0.914 1.205 1.651 2.515 3.658 4.978 6.502
Th 1.7-2.8-5.5 2.7-3.6-6.6 3.0-4.2-7.5 3.6-4.8-8.1 3.9-5.7-8.4 4.8-6.6-9.3 5.7-7.5-10.2 6.6-8.1-11.1 7.2-8.4-11.7
NC <15 <15 <15 <15 17 24 30 34 38
L /S 106 133 159 186 212 265 319 372 425
450x225 0.105 0.039 Pt 0.395 0.616 0.914 1.205 1.651 2.515 3.658 4.978 6.502
Th 2.4-3.3-6.0 2.7-3.6-6.9 3.0-4.2-7.5 3.6-5.1-7.8 4.2-6.0-9.0 5.1-6.9-9.6 6.0-7.5-10.5 6.6-8.1-11.1 7.2-8.7-12
NC <15 <15 <15 15 18 25 31 35 39
L /S 118 147 177 206 236 295 354 413 472
375x300 0.116 0.043 Pt 0.395 0.616 0.914 1.205 1.651 2.515 3.658 4.978 6.502
Th 2.4-3.3-6.6 2.7-3.9-6.9 3.0-4.5-7.5 3.6-5.4-8.1 4.5-6.3-9.0 5.4-6.9-9.9 6.3-7.8- 10.5 6.9-8.4-11.1 7.5-9.3-12.6
NC <15 <15 <15 15 19 26 32 36 40
L /S 124 155 186 217 248 310 372 434 496
525x225 0.122 0.045 Pt 0.395 0.616 0.914 1.205 1.651 2.515 3.658 4.978 6.502
Th 2.4-3.0-6.0 2.7-3.6-6.6 3.0-4.8-7.5 3.6-5.7-8.1 4.2-6.0-8.7 5.1-6.6-9.3 6.0-7.5-9.9 6.9-8.4-11.1 7.2-9.0-12.9
NC <15 <15 <15 15 18 25 31 35 39
L /S 142 177 212 248 283 354 425 496 566
600x225 0.139 0.052 Pt 0.395 0.616 0.914 1.205 1.651 2.515 3.658 4.978 6.502
Th 2.4-3.0-6.0 2.7-4.2-6.9 3.3-5.1-7.5 3.9-5.7-8.1 4.5-6.0-8.7 5.4-6.9-9.3 6.3-7.5-10.2 6.9-8.7-11.1 7.5-9.0-12.9
NC <15 <15 <15 15 19 26 32 36 40
L /S 142 177 212 248 283 354 425 496 566
450x300 0.139 0.052 Pt 0.395 0.616 0.914 1.205 1.651 2.515 3.658 4.978 6.502
Th 2.4-3.0-6.0 2.7-3.9-6.6 3.3-4.8-7.2 3.6-5.4-7.8 4.2-5.7-8.4 5.1-6.6-9.0 6.0-7.2-9.9 6.9-8.4-10.8 7.2-8.7-12.3
NC <15 <15 <15 15 20 27 33 37 41

CEILING DIFFUSERS 15
 C E IL ING DIF F US E R S S A D,R A D

P E R F OR MA NC E DATA - S UP P LY

*S I UNIT S
S IZE An Ak Vn 1.016 1.270 1.524 1.778 2.032 2.540 3.048 3.556 4.064
L /S 148 184 221 258 295 369 443 516 590
375x375 0.145 0.054 Pt 0.356 0.559 0.813 1.092 1.422 2.210 3.200 4.369 5.715
Th 2.4-3.6-6.9 3.0-4.2-8.1 3.6-5.1-9.0 3.9-5.7-9.9 4.8-6.9-10.2 5.7-8.1-11.4 6.9-9.0-12.9 7.8-9.6-13.8 8.4-10.2-15
NC <15 <15 17 23 28 35 41 45 49
L /S 165 206 248 289 330 413 496 578 661
525x300 0.163 0.060 Pt 0.395 0.616 0.914 1.205 1.651 2.515 3.658 4.978 6.502
Th 2.4-3.6-7.5 3.0-4.5-8.4 3.6-5.4-9.3 4.5-6.6-9.6 5.1-7.5-10.5 6.3-8.4-12.3 7.5-9.3-13.2 8.1-9.9-14.4 9.0-10.8-15.6
NC <15 <15 <15 15 20 27 33 37 41
L /S 177 221 265 310 354 442 531 619 708
450x375 0.174 0.064 Pt 0.395 0.616 0.914 1.205 1.651 2.515 3.658 4.978 6.502
Th 2.4-3.3-7.2 3.0-4.8-8.7 3.9-5.7-9.3 4.5-6.9-9.9 5.1-7.2-10.2 6.6-8.7-12.6 7.5-9.3-13.5 8.4-10.2-15 9.3-11.1-16.2
NC <15 <15 <15 17 21 28 34 38 42
L /S 189 236 283 330 378 472 566 661 755
600x300 0.186 0.068 Pt 0.395 0.616 0.914 1.205 1.651 2.515 3.658 4.978 6.502
Th 2.4-3.3-7.2 3.3-4.8-8.7 3.9-6.0-9.3 4.5-6.9-9.9 5.7-7.8-11.4 6.9-8.7-12.9 7.8-9.6-14.1 8.4-10.5-15.3 9.0-11.4-16.8
NC <15 <15 <15 17 21 28 34 38 42
L /S 207 258 310 361 413 516 620 723 826
525x375 0.203 0.074 Pt 0.395 0.616 0.914 1.205 1.651 2.515 3.658 4.978 6.502
Th 2.7-3.9-7.8 3.3-5.1-8.7 3.9-6.3-9.3 4.8-7.2-10.5 6.0-8.1-12.0 7.2-9.0-13.2 7.8-9.9-14.4 8.4-10.8-15.9 9.2-11.7-17.7
NC <15 <15 <15 17 21 28 34 38 42
L /S 212 265 319 372 425 531 637 743 849
450x450 0.209 0.073 Pt 0.381 0.584 0.838 1.143 1.473 2.311 3.353 4.521 5.969
Th 2.7-4.2-8.1 3.3-5.1-9.6 4.2-6.0-10.5 4.8-6.9-11.7 5.7-8.1-12.3 6.6-9.6-13.5 8.1-10.5-15.3 9.3-11.4-16.2 12.3-16.2-17.7
NC <15 18 22 27 34 39 44 48 53
LS 236 295 354 413 472 590 708 826 944
600x375 0.232 0.084 Pt 0.395 0.616 0.914 1.205 1.651 2.515 3.658 4.978 6.502
Th 2.7-4.5-8.7 3.6-5.4-9.9 4.2-6.3-10.8 5.4-7.8-11.7 6.0-8.7-12.6 7.2-9.9-14.1 9.0-11.1-15.9 12.0-15.6-17.1 12.9-16.5-18.3
NC <15 <15 <15 18 22 29 35 39 43
L /S 248 310 372 434 496 619 743 867 991
525x450 0.244 0.088 Pt 0.395 0.616 0.914 1.205 1.651 2.515 3.658 4.978 6.502
Th 2.4-4.2-7.8 3.6-5.4-9.9 4.2-6.0-10.5 5.4-8.1-12.0 5.7-8.4-12.6 6.9-9.3-13.5 8.7-10.8-15.0 12.0-15.3-17.1 13.5-16.8-18.9
NC <15 <15 <15 18 22 29 36 39 43

C E IL ING DIF F US E R S S A D,R A D

P E R F OR MA NC E DATA - S UP P LY

*S I UNIT S
S IZE An Ak Vn 1.016 1.270 1.524 1.778 2.032 2.540 3.048 3.556 4.064
L /S 283 354 425 496 566 708 849 991 1133
600x450 0.279 0.101 Pt 0.395 0.616 0.914 1.205 1.651 2.515 3.658 4.978 6.502
Th 3.3-4.8-9.3 3.9-6.0-10.8 4.8-7.2-12.3 5.7-8.1-13.5 6.6-9.6-14.1 8.4-11.1-15.6 9.9-12.6-17.7 11.4-13.8-18.3 12.3-14.7-20.4
NC <15 <15 <15 19 23 30 36 40 44
L /S 289 361 434 506 578 723 867 1012 1156
525x525 0.285 0.099 Pt 0.381 0.610 0.864 1.168 1.524 2.413 3.454 4.724 6.121
Th 3.3-4.6-9.3 3.9-6.0-11.1 4.8-7.2-12.3 5.7-8.1-13.5 6.6-9.6-14.1 7.8-11.1-15.9 9.6-12.3-17.7 10.8-13.2-18.9 11.7-14.1-20.7
NC 16 20 25 31 37 42 47 51 55
L /S 330 413 496 578 661 826 991 1156 1321
600x525 0.325 0.117 Pt 0.395 0.616 0.914 1.205 1.651 2.515 3.658 4.978 6.502
Th 3.3-5.1-9.9 4.2-6.6-11.7 5.4-7.8-12.6 6.3-9.0-13.5 6.9-10.2-14.7 8.7-11.7-16.8 10.5-12.6-18.0 11.4-13.5-19.8 12.3-14.7-21.6
NC <15 <15 15 18 24 31 37 41 45
L /S 378 472 566 661 755 944 1133 1321 1510
600x600 0.372 0.130 Pt 0.381 0.610 0.889 1.194 1.549 2.413 3.505 4.775 6.223
Th 3.6-5.7-10.8 4.5-6.9-12.9 5.4-8.1-14.1 6.3-9.3-15.6 7.5-11.1-16.2 9.0-12.9-18.0 11.1-14.1-20.1 12.3-15.3-21.6 13.5-16.2-23.7
NC 18 23 29 34 40 45 50 53 57

S Y MB OL S C ONDIT IONS NOT E S C OR R E C T ION F OR 1-2 A ND 3 WAY

L/S Air volume in litre per s econd * S upply. * T he large throw values are bas ed on the * Nois e C riteria :No correction required.
Ak E ffective area in s quare meter * Damper is fully open. minimum terminal velocity of 0.25 m/s ec. * P res s ure : No correction required.
An Neck area in s quare meter * Nois e C riteria values are * T he middle throw values are bas ed on the * T hrow : 3 way - increas e from 10 - 20%
Vn Neck velocity in meter per s econd bas ed on (1 0 dB ) room middle terminal velocity of 0.5 m/s ec. 2 way - increas e from 20 - 30%
Pt Total pres s ure in mm water gauge attenuation * T he s mall throw values are bas ed on the 1 way - increas e from 40 - 50%
Th T hrow in meter maximum terminal velocity of 0.75 m/s ec. * Drop : No correction required.
NC Nois e C riteria * F or R ectangular Diffus ers - throw values
mentioned are for the longer s ide of the
diffus er- for s horter s ides throw values are
0.7-0.75 of the mentioned ones .

CEILING DIFFUSERS 17
 C E IL ING DIF F US E R S S A D,R A D

P E R F O R MA NC E DATA - R E T UR N

*S I UNIT S
S IZE An Vn 1.5 2 2.5 3 3.6 4.1
L /S 35 47 59 71 83 94
150 x 150 0.023 Ps 1.270 2.032 3.302 4.572 6.350 8.128
NC <15 17 25 31 36 41
L /S 53 71 88 106 124 142
225 x 150 0.035 Ps 1.524 2.540 3.810 5.588 7.620 9.906
NC <15 19 28 33 38 44
L /S 71 94 118 142 165 189
300 x 150 0.046 Ps 1.524 2.540 3.810 5.588 7.620 9.906
NC <15 21 29 34 40 45
L /S 79 106 132 159 185 211
225 x 225 0.052 Ps 1.524 2.540 3.810 5.588 7.620 9.906
NC <15 22 30 36 41 46
L /S 88 118 147 177 206 236
375 x 150 0.058 Ps 1.524 2.626 3.986 5.764 7.881 10.253
NC <15 23 31 36 42 46
L /S 106 142 177 212 248 283
450 x 150 0.070 Ps 1.524 2.793 4.320 6.098 8.383 10.922
NC 15 24 32 37 43 47
L /S 106 142 177 212 248 283
300 x 225 0.070 Ps 1.524 2.793 4.320 6.098 8.382 10.922
NC 15 24 32 37 43 47
L /S 124 165 206 248 289 330
525 x 150 0.081 Ps 1.524 2.794 4.318 6.096 8.382 10.922
NC 16 25 33 38 44 48
L /S 133 177 221 266 310 354
375 x 225 0.087 Ps 1.524 2.794 4.318 6.096 8.382 10.922
NC 16 26 33 38 45 48
L /S 142 189 236 283 330 378
300 x 300 0.093 Ps 1.524 2.794 4.318 6.096 8.382 10.922
NC 16 26 33 39 45 49
L /S 142 189 236 283 330 378
600 x 150 0.093 Ps 1.524 2.794 4.318 6.096 8.382 10.922
NC 16 26 33 39 45 49
L /S 159 212 265 319 372 425
450 x 225 0.105 Ps 1.524 2.794 4.318 6.096 8.382 10.922
NC 17 27 34 40 46 50
L /S 177 236 295 354 413 472
375 x 300 0.116 Ps 1.524 2.794 4.318 6.096 8.382 10.922
NC 17 27 34 40 46 50
L /S 186 248 310 372 434 496
525 x 225 0.122 Ps 1.524 2.794 4.318 6.096 8.382 10.922
NC 18 27 35 41 46 51
L /S 212 283 354 425 495 566
600 x 225 0.139 Ps 1.524 2.794 4.318 6.096 8.382 10.922
NC 19 28 36 42 47 52
L /S 212 283 354 425 495 566
450 x 300 0.139 Ps 1.524 2.794 4.318 6.096 8.382 10.922
NC 19 28 36 42 47 52
L /S 221 294 368 442 515 589
375 x 375 0.145 Ps 1.524 2.794 4.318 6.096 8.382 10.922
NC 19 28 36 42 47 52

C E IL ING DIF F US E R S S A D,R A D

P E R F OR MA NC E DATA - R E T UR N

*S I UNIT S
S IZE An Vn 1.5 2 2.5 3 3.6 4.1
NC 19 28 36 42 47 52
L /S 248 330 413 495 578 661
525 x 300 0.163 Ps 1.524 2.794 4.318 6.096 8.382 10.922
NC 20 29 37 42 48 53
L /S 265 354 442 531 619 708
450 x 375 0.174 Ps 1.524 2.794 4.318 6.096 8.382 10.922
NC 20 29 37 43 49 53
L /S 283 378 472 566 661 755
600 x 300 0.186 Ps 1.524 2.794 4.318 6.096 8.382 10.922
NC 21 30 37 43 49 53
L /S 310 413 516 620 723 826
525 x 375 0.203 Ps 1.524 2.794 4.318 6.096 8.382 10.922
NC 21 31 38 44 50 54
L /S 319 425 531 637 743 849
450 x 450 0.209 Ps 1.524 2.794 4.318 6.096 8.382 10.922
NC 21 31 38 44 50 54
L /S 354 472 590 708 826 944
600 x 375 0.232 Ps 1.524 2.794 4.318 6.096 8.382 10.922
NC 22 32 39 45 51 55
L /S 372 495 619 743 867 991
525 x 450 0.244 Ps 1.524 2.794 4.318 6.096 8.382 10.922
NC 22 32 39 45 51 55
L /S 425 566 708 849 991 1133
600 x 450 0.279 Ps 1.524 2.794 4.318 6.096 8.382 10.922
NC 23 33 40 46 52 56
L /S 433 578 722 866 1011 1155
525 x 525 0.285 Ps 1.524 2.794 4.318 6.096 8.382 10.922
NC 23 33 40 46 52 56
L /S 495 661 826 991 1156 1321
600 x 525 0.325 Ps 1.524 2.794 4.318 6.096 8.382 10.922
NC 24 34 41 47 53 57
L /S 566 755 944 1133 1321 1510
600 x 600 0.372 Ps 1.524 2.794 4.318 6.096 8.382 10.922
NC 24 34 42 48 53 58

S Y MB OL S C ONDIT IONS
L/S : Air volume in litre per s econd * R eturn
*An : Neck area in meter s quare * Damper is fully open.
*V n : Neck velocity in meter per s econd * Nois e C riteria is bas ed on (10dB ) room attenuation.
*P s : Negative s tatic pres s ure in mm water gauge
*NC : Nois e C riteria

CEILING DIFFUSERS 19
 C E IL ING DIF F US E R S S A D,R A D

P E R F O R MA NC E DATA - S UP P LY

*IMP E R IA L UNIT S
S IZE An Ak Vn 200 250 300 350 400 500 600 700 800

CFM 50 63 75 88 100 125 150 175 200

6x 6 0.250 0.096 Pt 0.013 0.020 0.028 0.039 0.051 0.079 0.144 0.156 0.198
Th 3-4-8 4-6-11 4-7-12 5-8-13 6-9-14 7-11-16 9-12-17 10-13-18 11-14-19
NC <15 <15 <15 <15 <15 19 24 29 33
CFM 75 93 112 131 150 187 225 262 300
9x 6 0.375 0.146 Pt 0.013 0.020 0.028 0.039 0.051 0.080 0.144 0.196 0.256
Th 4-6-11 5-7-13 6-8-14 7-10-16 8-11-17 10-13-20 12-15-22 14-17-24 15-18-25
NC <15 <15 <15 <15 <15 20 26 30 34
CFM 100 125 150 175 200 250 300 350 400

12 x 6 0.500 0.192 Pt 0.013 0.020 0.029 0.040 0.052 0.081 0.144 0.196 0.256
Th 5-7-14 6-9-15 7-10-16 8-11-18 9-12-19 11-14-22 13-16-24 15-18-26 17-20-28
NC <15 <15 <15 <15 <15 21 27 31 35
CFM 110 140 170 195 225 280 335 395 450
9x 9 0.563 0.210 Pt 0.013 0.020 0.029 0.040 0.052 0.081 0.117 0.160 0.208
Th 5-7-14 6-9-16 7-11-18 8-12-20 10-14-21 11-16-23 14-18-26 16-20-28 17-21-31
NC <15 <15 <15 <15 16 22 28 33 37
CFM 125 156 188 219 250 312 375 438 500
15 x 6 0.625 0.239 Pt 0.016 0.024 0.036 0.047 0.065 0.099 0.144 0.196 0.256
Th 5-8-14 6-9-16 7-11-19 9-13-21 11-15-23 13-17-25 15-19-27 17-21-29 20-24-33
NC <15 <15 <15 <15 15 22 28 32 36

C E IL ING DIF F US E R S S AD,R AD

P E R F OR MA NC E DATA - S UP P LY

*IMP E R IA L UNIT S

S IZE An Ak Vn 200 250 300 350 400 500 600 700 800

CFM 150 188 225 263 300 375 450 525 600
18 x 6 0.750 0.284 Pt 0.016 0.024 0.036 0.047 0.065 0.099 0.144 0.196 0.256
Th 6-9-15 7-11-19 8-12-20 10-14-22 12-16-25 14-18-27 16-20-30 18-23-33 21-26-37
NC <15 <15 <15 <15 16 23 29 33 37
CFM 150 188 225 263 300 375 450 525 600
12 x 9 0.750 0.284 Pt 0.016 0.024 0.036 0.047 0.065 0.099 0.144 0.196 0.256
Th 6-9-15 7-11-19 8-12-20 10-14-22 12-16-25 14-18-27 16-20-30 18-23-33 21-26-37
NC <15 <15 <15 <15 16 23 29 33 37
CFM 175 218 262 306 350 437 525 612 700

21 x 6 0.875 0.330 Pt 0.016 0.024 0.036 0.047 0.065 0.099 0.144 0.196 0.256
Th 6-9-16 7-11-20 10-13-23 11-15-25 12-16-27 14-18-29 17-20-31 19-23-34 21-26-37
NC <15 <15 <15 <15 16 23 29 33 37
CFM 188 235 281 328 375 469 563 657 750
15 x 9 0.938 0.353 Pt 0.016 0.024 0.036 0.047 0.065 0.099 0.144 0.196 0.256
Th 6-9-15 8-10-19 9-13-23 11-15-24 12-17-26 14-19-29 17-21-32 19-23-35 22-26-38
NC <15 15 17 20 24 30 34 38 42
CFM 200 250 300 350 400 500 600 700 800
12 x 12 1.000 0.353 Pt 0.014 0.021 0.031 0.042 0.055 0.085 0.124 0.167 0.219
Th 6-9-18 7-11-21 9-13-24 11-16-26 12-18-27 15-21-30 18-24-33 21-26-36 23-27-38
NC <15 <15 <15 16 19 25 32 36 40

CEILING DIFFUSERS 21
 C E ILING DI I F U E R S S A D,R A D

P E R F OR MA NC E DATA - S UP P LY

*IMP E R IA L UNIT S

S IZE An Ak Vn 200 250 300 350 400 500 600 700 800

CFM 305 380 458 530 600 750 900 1050 1200
18 x 12 1.500 0.555 Pt 0.016 0.024 0.036 0.047 0.065 0.099 0.144 0.196 0.256
Th 8-10-20 9-13-22 11-16-24 12-18-26 14-19-28 17-22-30 20-24-33 23-28-36 24-29-41
NC <15 <15 <15 15 20 27 33 37 41
CFM 310 390 470 545 625 780 940 1090 1250
15 x 15 1.563 0.577 Pt 0.014 0.022 0.032 0.043 0.056 0.087 0.126 0.172 0.225
Th 8-12-23 10-14-27 12.17-30 13-19-33 16-23-34 19-27-38 23-30-43 26-32-46 28-34-50
NC <15 <15 17 23 28 35 41 45 49
CFM 350 438 525 613 700 875 1050 1225 1400

21 x 12 1.750 0.644 Pt 0.016 0.024 0.036 0.047 0.065 0.099 0.144 0.196 0.256
Th 8-12-25 10-15-28 12-18-31 15-22-32 17-25-35 21-28-41 25-31-44 27-33-48 30-36-52
NC <15 <15 <15 15 20 27 33 37 41
CFM 375 468 562 656 750 937 1125 1312 1500
18 x 15 1.875 0.688 Pt 0.016 0.024 0.036 0.047 0.065 0.099 0.144 0.196 0.256
Th 8-11-24 10-16-29 13-19-31 15-23-33 17-24-34 22-29-42 25-31-45 28-34-50 31-37-54
NC <15 <15 <15 17 21 28 34 38 42
CFM 400 500 600 700 800 1000 1200 1400 1600
24 x 12 2.000 0.732 Pt 0.016 0.024 0.036 0.047 0.065 0.099 0.144 0.196 0.256
Th 8-11-24 11-16-29 13-20-31 15-23-33 19-26-38 23-29-43 26-32-47 28-35-51 30-38-56
NC <15 <15 <15 17 21 28 34 38 42

C E ILING DI I F U E R S S AD,R AD

P E R F OR MA NC E DATA - S UP P LY

*IMP E R IA L UNIT S

S IZE An Ak Vn 200 250 300 350 400 500 600 700 800

CFM 305 380 458 530 600 750 900 1050 1200
18 x 12 1.500 0.555 Pt 0.016 0.024 0.036 0.047 0.065 0.099 0.144 0.196 0.256
Th 8-10-20 9-13-22 11-16-24 12-18-26 14-19-28 17-22-30 20-24-33 23-28-36 24-29-41
NC <15 <15 <15 15 20 27 33 37 41
CFM 310 390 470 545 625 780 940 1090 1250
15 x 15 1.563 0.577 Pt 0.014 0.022 0.032 0.043 0.056 0.087 0.126 0.172 0.225
Th 8-12-23 10-14-27 12.17-30 13-19-33 16-23-34 19-27-38 23-30-43 26-32-46 28-34-50
NC <15 <15 17 23 28 35 41 45 49
CFM 350 438 525 613 700 875 1050 1225 1400

21 x 12 1.750 0.644 Pt 0.016 0.024 0.036 0.047 0.065 0.099 0.144 0.196 0.256
Th 8-12-25 10-15-28 12-18-31 15-22-32 17-25-35 21-28-41 25-31-44 27-33-48 30-36-52
NC <15 <15 <15 15 20 27 33 37 41
CFM 375 468 562 656 750 937 1125 1312 1500
18 x 15 1.875 0.688 Pt 0.016 0.024 0.036 0.047 0.065 0.099 0.144 0.196 0.256
Th 8-11-24 10-16-29 13-19-31 15-23-33 17-24-34 22-29-42 25-31-45 28-34-50 31-37-54
NC <15 <15 <15 17 21 28 34 38 42
CFM 400 500 600 700 800 1000 1200 1400 1600
24 x 12 2.000 0.732 Pt 0.016 0.024 0.036 0.047 0.065 0.099 0.144 0.196 0.256
Th 8-11-24 11-16-29 13-20-31 15-23-33 19-26-38 23-29-43 26-32-47 28-35-51 30-38-56
NC <15 <15 <15 17 21 28 34 38 42

CEILING DIFFUSERS 23
 C E IL ING DIF F US E R S S A D,R A D

P E R F OR MA NC E DATA - S UP P LY

*IMP E R IA L UNIT S

S IZE An Ak Vn 200 250 300 350 400 500 600 700 800

CFM 200 250 300 350 400 500 600 700 800
24 x 6 1.000 0.358 Pt 0.016 0.024 0.036 0.047 0.065 0.099 0.144 0.196 0.256
Th 7-10-19 9-12-22 10-14-25 12-16-27 13-19-28 16-22-31 19-25-34 22-27-37 24-28-39
NC <15 <15 <15 <15 17 24 30 34 38
CFM 226 282 337 393 450 562 675 768 900
18 x 9 1.125 0.420 Pt 0.016 0.024 0.036 0.047 0.065 0.099 0.144 0.196 0.256
Th 8-11-20 9-12-23 10-14-25 12-17-26 14-20-30 17-24-32 20-25-35 22-27-37 24-29-40
NC <15 <15 <15 15 18 25 31 35 39
CFM 250 313 375 438 500 625 750 875 1000

15 x 12 1.250 0.465 Pt 0.016 0.024 0.036 0.047 0.065 0.099 0.144 0.196 0.256
Th 8-12-22 19-13-23 10-15-25 12-18-27 15-21-30 18-23-33 21-26-35 23-28-37 25-31-42
NC <15 <15 <15 15 19 26 32 36 40
CFM 262 327 393 458 524 655 786 917 1050
21 x 9 1.313 0.488 Pt 0.016 0.024 0.036 0.047 0.065 0.099 0.144 0.196 0.256
Th 8-10-20 9-12-22 10-16-25 12-19-27 14-20-29 17-22-31 20-25-33 23-28-37 24-30-43
NC <15 <15 <15 15 18 25 31 35 39
CFM 300 375 450 525 600 750 900 1050 1200
24 x 9 1.500 0.555 Pt 0.016 0.024 0.036 0.047 0.065 0.099 0. 144 0.196 0.256
Th 8-10-20 9-14-23 11-17-25 13-19-27 15-20-29 18-23-31 21-25-34 23-29-37 25-30-43
NC <15 <15 <15 15 19 26 32 36 40

C E IL ING DIF F US E R S S A D,R A D

P E R F O R MA NC E DATA - S UP P LY

*IMP E R IA L UNIT S

CFM 610 765 920 1070 1225 1530 1835 2140 2450
21 x 21 3.063 1.065 Pt 0.015 0.024 0.034 0.046 0.060 0.095 0.036 0.186 0.241
Th 11-16-31 13-20-37 16-24-41 19-27-45 22-32-47 26-37-53 32-41-59 36-44-63 39-47-69
NC 16 20 25 31 37 42 47 51 55
CFM 700 875 1050 1225 1400 1750 2100 2450 2800
24 x 21 3.500 1.256 Pt 0.016 0.024 0.036 0.047 0.065 0.099 0.144 0.196 0.256
Th 11-17-33 14-22-39 18-26-42 21-30-45 23-34-49 29-39-56 35-42-60 38-45-66 41-49-72
NC <15 <15 15 18 24 31 37 41 45
CFM 800 1000 1200 1400 1600 2000 2400 2800 3200
24 x 24 4.000 1.400 Pt 0.015 0.024 0.035 0.047 0.061 0.095 0.038 0.188 0.245
Th 12-19-36 15-23-43 18-27-47 21-31-52 25-37-54 30-43-60 37-47-67 41-51--72 45-54-79
NC 18 23 29 34 40 45 50 53 57

S Y MB O L S C O NDIT IO NS NO T E S C O R R E C T IO N F O R 1-2 A ND 3 WAY

* T he large throw values are bas ed on C riteria

CFM : Air Volume in cubic foot per minute. * S upply. : No correction required.
the minimum terminal velocity of 50
Ak : E ffective area in s quare foot. *Damper is fully open fpm. * P res s ure : No correction required.
* T he middle throw values are bas ed on
An : Neck area in s quare foot. * T hrow : 3 way - increas e from 10 - 20%
the middle terminal velocity of 100
* Nois e C irteria values
Vn : Neck velocity in foot per minute. fpm. : 2 way - increas e from 20 - 30%
are bas ed on (10
* T he s mall throw values are bas ed on
Pt : Total pres s ure in inches water gauge. dB ) room attenuation. the maximum terminal velocity of : 1 way - increas e from 40 - 50%

Th : T hrow in feet. 150fpm. * Drop : No correction required.

NC : Nois e C riteria * F or R ectangular Diffus ers - throw

values mentioned are for the longer
s ide of the diffus er- for s horter s ides
throw values are 0.7-0.75 of the
mentioned ones .

CEILING DIFFUSERS 25
 C E IL ING DIF F U S E R S S A D,R A D
P E R F O R MA NC E DATA - R E T UR N

S IZE An Vn 300 400 500 600 700 800

CFM 75 100 125 150 175 200
6x 6 0.250 Ps 0.050 0.080 0.130 0.180 0.250 0.320
NC <15 17 25 31 36 41
CFM 113 150 188 225 263 300
9x 6 0.375 Ps 0.060 0.100 0.150 0.220 0.300 0.390
NC <15 19 28 33 38 44
CFM 150 200 250 300 350 400
12 x 6 0.500 Ps 0.060 0.100 0.150 0.220 0.300 0.390
NC <15 21 29 34 40 45
CFM 168 224 280 336 392 448
9x 9 0.563 Ps 1.060 0.100 0.150 0.220 0.300 0.390
NC <15 22 30 36 41 46
CFM 188 250 313 375 438 500
15 x 6 0.625 Ps 0.060 0.103 0.157 0.227 0.310 0.404
NC <15 23 31 36 42 46
CFM 225 300 375 450 525 600
18 x 6 0.750 Ps 0.060 0.110 0.170 0.240 0.330 0.430
NC 15 24 32 37 43 47
CFM 225 300 375 450 525 600
12 x 9 0.750 Ps 0.060 0.110 0.170 0.240 0.330 0.430
NC 15 24 32 37 43 47
CFM 263 350 438 525 613 700
21 x 6 0.875 Ps 0.060 0.110 0.170 0.240 0.330 0.430
NC 16 25 33 38 44 48
CFM 281 375 469 563 657 750
15 x 9 0.938 Ps 0.060 0.110 0.170 0.240 0.330 0.430
NC 16 26 33 38 45 48
CFM 300 400 500 600 700 800
12 x 12 1.000 Ps 0.060 0.110 0.170 0.240 0.330 0.430
NC 16 26 33 39 45 49
CFM 300 400 500 600 700 800
24 x 6 1.000 Ps 0.060 0.110 0.170 0.240 0.330 0.430
NC 16 26 33 39 45 49
CFM 338 450 563 675 788 900
18 x 9 1.125 Ps 0.060 0.110 0170 0.240 0.330 0.430
NC 17 27 34 40 46 50
CFM 375 500 625 750 875 1000
15 x 12 1.250 Ps 0.060 0.110 0.170 0.240 0.330 0.430
NC 17 27 34 40 46 50
CFM 394 525 657 788 919 1050
21 x 9 1.313 Ps 0.060 0.110 0.170 0.240 0.330 0.430
NC 18 27 35 41 46 51
CFM 450 600 750 900 1050 1200
24 x 9 1.500 Ps 0.060 0.110 0.170 0.240 0.330 0.430
NC 19 28 36 42 47 52
CFM 450 600 750 900 1050 1200
18 x 12 1.500 Ps 0.060 0.110 0.170 0.240 0.330 0.430
NC 19 28 36 42 47 52
CFM 468 624 780 936 1092 1248
15 x 15 1.563 Ps 0.060 0.110 0.170 0.240 0.339 0.430
NC 19 28 36 42 47 52

C E IL ING DIF F US E R S S AD,R AD

P E R F OR MA NC E DATA - R E T UR N
*IMP E R IA L UNIT S
S IZE An Vn 300 400 500 600 700 800
NC 19 28 36 42 47 52
CFM 525 700 875 1050 1225 1400
21 x 12 1.750 Ps 0.060 0.110 0.170 0.240 0.330 0.43 0
NC 20 29 37 42 48 53
CFM 563 750 938 1125 1313 1500
18 x 15 1.875 Ps 0.060 0.110 0.170 0.240 0.330 0.430
NC 20 29 37 43 49 53
CFM 600 800 1000 1200 1400 1600
24 x 12 2.000 Ps 0.060 0.110 0.170 0.240 0.330 0.430
NC 21 30 37 43 49 53
CFM 656 875 1094 1313 1532 1750
21 x 15 2.188 Ps 0.060 0.110 0.170 0.240 0.330 0.430
NC 21 31 38 44 50 54
CFM 675 900 1125 1350 1575 1800
18 x 18 2.250 Ps 0.060 0.110 0.170 0.240 0.330 0.430
NC 21 31 38 44 50 54
CFM 750 1000 1250 1500 1750 2000
24 x 15 2.500 Ps 0.060 0.110 0.170 0.240 0.330 0.430
NC 22 32 39 45 51 55
CFM 788 1050 1313 1575 1838 2100
21 x 18 2.625 Ps 0.060 0.110 0.170 0.240 0.330 0.430
NC 22 32 39 45 51 55
CFM 900 1200 1500 1800 2100 2400
24 x 18 3.000 Ps 0.060 0.110 0.170 0.240 0.330 0.430
NC 23 33 40 46 52 56
CFM 918 1224 1530 1836 2142 2448
21 x 21 3.063 Ps 0.060 0.110 0.170 0.240 0.330 0.430
NC 23 33 40 46 52 56
CFM 1050 1400 1750 2100 2450 2800
24 x 21 3.500 Ps 0.060 0.110 0.170 0.240 0.330 0.430
NC 24 34 40 47 53 57
CFM 1200 1600 2000 2400 2800 3200
24 x 24 4.000 Ps 0.060 0.110 0.170 0.240 0.330 0.430
NC 24 34 42 48 53 58

S Y MB OL S C ONDIT IONS
*C F M: Air volume in cubic feet per minute *R eturn
*An: Neck area in foot squared *Damper is fully open.
*V n: Neck velocity in foot per minute *Noise C riteria is based on (10dB ) room attenuation
*P s: Negative static pressure in inch water gauge
*NC : Noise C riteria

CEILING DIFFUSERS 27
 C E IL ING DIF F US E R S S A D,R A D

P E R F OR MA NC E DATA - S UP P LY

*S I UNIT S
S IZE An Ak Vn 1.016 1.270 1.524 1.778 2.032 2.540 3.048 3.556 4.064
L /S 24 29 35 41 47 59 71 83 94
150 X 150 0.023 0.009 Pt 0.330 0.508 0.711 0.991 1.295 2.007 3.658 3.962 5.029
Th 0.9-1.2-2.4 1.2-1.8-3.3 1.2-2.1-3.6 1.5-2.4-3.9 1.8-2.7-4.2 2.1-3.3-4.8 2.7-3.6-5.1 3.0-3.9-5.4 3.3-4.2-5.7
NC <15 <15 <15 <15 <15 19 24 29 33
L /S 35 44 53 62 71 88 106 124 142
225 X 150 0.035 0.014 Pt 0.330 0.508 0.711 0.991 1.295 2.032 3.568 4.978 6.502
Th 1.2-1.8-3.3 1.5-2.1-3.9 1.8-2.4-4.2 2.1-3.0-4.8 2.4-3.3-5.1 3.0-3.9-6.0 3.6-4.5-6.6 4.2-5.1-7.2 4.5-5.4-7.5
NC <15 <15 <15 <15 <15 20 26 30 34
L /S 47 59 71 83 94 118 142 165 189
300 X 150 0.046 0.018 Pt 0.330 0.508 0.737 1.013 1.321 2.057 3.658 4.978 6.502
Th 1.5-2.1-4.2 1.8-2.7-4.5 2.1-3.0-4.8 2.4-3.3-5.4 2.7-3.6-5.7 3.3-4.2-6.6 3.9-4.8-7.2 4.5-5.4-7.8 5.1-6.0-8.4
NC <15 <15 <15 <15 <15 21 27 31 35
L /S 53 66 80 93 106 133 159 186 213
225 X 225 0.052 0.020 Pt 0.330 0.508 0.737 1.016 1.321 2.057 2.972 4.064 5.283
Th 1.5-2.1-4.2 1.8-2.7-4.8 2.1-3.3-5.4 2.4-3.6-6.0 3.0-4.2-6.3 3.3-4.8-6.9 4.2-5.4-7.8 4.8-6.0-8.4 5.1-6.3-9.3
NC <15 <15 <15 <15 16 22 28 33 37
L /S 59 74 88 103 118 147 177 206 236
375 X 150 0.058 0.020 Pt 0.395 0.616 0.914 1.205 1.651 2.515 3.658 4.978 6.502
Th 1.5-2.1-4.2 1.8-2.7-4.8 2.1-3.3-5.7 2.7-3.9-6.3 3.3-4.5-6.9 3.9-5.1-7.5 4.5--5.7-8.1 5.1-6.3-8.7 6.0-7.2-9.9
NC <15 <15 <15 <15 15 22 28 32 36
L /S 71 88 106 124 142 177 212 248 283
450 X150 0.070 0.026 Pt 0.395 0.616 0.914 1.205 1.651 2.515 3.658 4.978 6.502
Th 1.8-2.7-4.5 2.1-3.3-5.7 2.4-3.6-6.0 3.0-4.2-6.6 3.6-4.8-7.5 4.2-5.4-8.1 4.8-6.0-9.0 .5.4-6.9-9.9 6.3-7.8-11.1
NC <15 <15 <15 <15 16 23 29 33 37
L /S 71 88 106 124 142 177 212 248 283
300 X 225 0.070 0.026 Pt 0.395 0.616 0.914 1.205 1.651 2.515 3.658 4.978 6.502
Th 1.8-2.7-4.5 2.1-3.3-5.7 2.4-3.6-6.0 3.0-4.2-6.6 3.6-4.8-7.5 4.2-5.4-8.1 4.8-6.0-9.0 5.4-6.9-9.9 6.3-7.8-11.1
NC <15 <15 <15 <15 16 23 29 33 37
L /S 83 103 124 145 165 206 248 289 330
525 X 150 0.081 0.031 Pt 0.395 0.616 0.914 1.205 1.651 2.515 3.658 4.978 6.502
Th 1.8-2.7-4.8 2.1-3.3-6.0 3.0-3.9-6.9 3.3-4.5-7.5 3.6-4.8-8.1 4.2-5.4-8.7 5.1-6.0-9.3 5.7-6.9-0.2 6.3-7.8-11.1
NC <15 <15 <15 <15 16 23 29 33 37
Example 3:
Example 1:

Example 2:

CEILING DIFFUSERS
29
 Engineering Notes:
PERFORATE CEILING
DIFFUSERS The TFE Perforated Diffusers provide a modern
silent and draft-free range of diffusers designed
exhaust units are normally supplied without this feature
for straight forward extract application.
to blend effectively with modern ceiling styles and These diffusers have high diffusion induction rates,
profiles. Offering excellent uniform air distribution resulting in rapid temperature and velocity equalization
patterns the unit comprises of an extruded aluminum of the mixed air mass before the supply air enters the
frame with a perforated steel sheet face, 50% free area, occupied space. As an alternative use also, the perforated
and square cones (core) concealed behind the perforated diffusers have been designed to meet architectural
CONTENTS face positioned to give 4, 3, 2 or 1 way discharge as
required for the supply units. While return, extract or
requirements as to appearance, module size or other
aesthetic considerations.
01 Introduction, Features & Characteristics.

02 Models, Perforated Ceiling Diffusers.

03 Diffuser Accessories, Profiles used in Perforated Diffusers.

04 Tabular Selection for Perforated Ceiling Diffusers.

05 Ordering Data.

Features & Characteristics:

• Construction: Frame & inner cones (core) are made of - Installation.
high quality Extruded Aluminum Profiles of 6063 Alloy. - Adjustment of key operated OBD.
• Frame Flange width: 30 mm. - Maintenance and cleaning.
• Perforated Face: made of G.l. Perforated sheet of 0.8 - Core exchange by different pattern in future.
mm thickness with 4 mm 0 perforation at a pitch of 6 • The core is held in place and fixed to the frame by two
mm to produce 50% free area. loaded spiral galvanized steel springs.
• Units are flush mounted available with different pattern • For a better supply air mixing, increase of throw and
arrangements 4, 3, 2 & 1 way (i.e. different ways of air induction, more sound containing and easy connection to
discharge directions). duct system, G.l. Neck. Adaptor is available as an option.
• Available in wide variety of square neck sizes ranging • Perforated diffusers project from the mounting surface
up to the most popular used 600 x 600 mm module by 5 mm.
with 595 x 595 mm outer frame size making it suitable • Accessories: see page No.PD-03.
for standard false ceiling panel replacement. • Mounting lnstructions: refer to page No.CD-09, Chapter
• The perforated screen shall be removable from the (1).
diffuser face and fitted with screws to facilitate the • Surface Finishes: see page No.PD-05.
removal of face screen to provide easy access to:

CEILING DIFFUSERS 31
Models
Construction and Dimensional Details
Model PSCD4WS, Standard Module 600 X 600 mm Face Size Diffuser Accessories
A. Opposed Blade Damper C. Foam Type Rubber Gasket (OpHonal)
Refer to page No. CD-06,Chapter (1). Refer to page No.CD-07,Chapter (1).

B. Equalizing Grid (Optional) D. Neck Adaptor (Optional)

Refer to page No. CD-07,Chapter (1).

• Diffusers called Perforated Supply Ceiling Diffuser and • Pattern and Opposed Blade Damper (provided as
coded as PSCD 4WS are always equipped with 4- Way standard).
Square

Model PSCD4WS, Standard Module 600 X 600 mm Face Size Perforated Diffuser Fixed with Neck: Adaptor

• For more details, refer to page No.CD-08.Chapter (1). • Data listed in table No.CD-04, page No.CD-08, Chapter
• The adaptor neck size `N` to be specified by customer (1) is not valid for Peforated Diffuser.
according to ducting system.

• Unless otherwise specified, Diffusers called Perforated and Opposed Blade Damper as standard to ensure
Return, Extract or Exhaust Ceiling Diffuser and coded as
PRCD W/0 CORE are normally supplied w/o inner core
straight forward extract application.
Cross Sectional Drawing for Frame Profile used in Perforated Diffusers

Model PSCD4WS, Standard Module 600 X 600 mm Face Size

• In some cases, Return, Extract or Exhaust Perforated • Other sizes and models are available on request.
Ceiling Diffusers are required with inner core (4 way • All Dimensions are in mm and subject to ±1 mm
pattern), this will be supplied on request only as on tolerance. • All Dimensions are in mm andsubject to± 0.2 mm tolerance.
option and coded as PRCD 4WS.

32 CEILING DIFFUSERS 33
 ORDERING DATA
• Available Surface Finishes for Perforated Ceiling Diffusers:
• Powder Coating (Standard Colors are white RAL 9010/ • Aluminium in Mill Finish.
9016, other optional colors if required to be provided • Other Special finishes (on request if available).
in RAL- No. only and charged extra).

• Available Surface Finishes for Opposed Blade Damper:

• Aluminium in Mill Finish (standard). • Matt Black Powder Coating (optional).

• Ordering Specifications:
Specify: (other non-standard sizes are available on request and
1. Perforated Ceiling Diffuser Description I Model (Supply to be ordered also by face size).
or Return). 6. Neck Adaptor Size if any.
2. Inner Core Arrangement if any (4, 3, 2 or 1 Way). 7. Quantity.
3. Inner Core shape (Square or Rectangular). 8. Perforated Diffuser Surface Finish.
4. Opposed Blade Damper Surface Finish (only mention if 9. RAL- No. (only mention if powder coating surface finish
required in Black color). is required).
5. Face Size (F) for the 600 x 600 mm Standard Module 10. Optional Accessories (Equalizing Grid, Gasket,
Adaptor ...or others).

Example 1:

Example 2:

Example 3:

Example 4:

• Damper at full open position • All listed sizes as above except No. (13) are equipped
• Noise Level values are based on 10 dB attennuation. with Neck Adaptor giving the listed neck: size.

34 CEILING DIFFUSERS 35
TECHNO FAB Engineering Head Office
United Arab Emirates
P. O. Box : 326900, UAQ, UAE
Tel : +971 6 7670 726
Fax : +971 6 7670 725
Email : [email protected]
Web : www.technofab-eng.com