VINTIK-PI V2 Schematic - Pulse Induction Metal Detectors
VINTIK-PI V2 Schematic - Pulse Induction Metal Detectors
VINTIK-PI V2 Schematic - Pulse Induction Metal Detectors
Watford Control
Voltage Stabilizers
Voltage Stabilizers For Home, Office & Small Business Use.
wa=ordcontrol.com OPEN
Induction Balance Metal Detectors Pulse Induction Metal Detectors Batteries and Chargers Programmers Search coils
Pinpointers Related techniques Simple DIY Projects إصنع كاشف ا*عادن بنفسك Confirm Subscription
Categories
NEW
# Arduino projects (5)
# Pinpointers (7)
# Programmers (14)
VINTIK-PI V2 schematic # Pulse Induction Metal Detectors (85)
# Chance PI metal detector (7)
Pulsed metal detector “VINTIK-PI” based on three ICs and four transistors,
designed to search for small metal objects at great depths. The circuit does # Clone PI-AVR metal detector (7)
not contain any programmable micro-controller, and many parts are # Clone PI-W metal detector (7)
The scheme differs from the previous version: # VLF metal detectors (1)
1. Added instead of the passive filter (R9-15, C8-10, see the previous version scheme)
of the IC3-NE555 delay node on the chip and the T3-BF245 switch on the field- Ads
effect transistor. The delay pulse duration is adjusted by the PR21 trimmer (5 kΩ)
in the range from 50 to 100 µs. In the previous version, the necessary part of the
pulse was cut out by a passive filter on R9, R12, R14, C8, C9, C10. Now this makes Watford Control
a delay node with a key on a field-effect transistor (NE555 and BF245). With this
Over 70 Years Of Experience
solution, the task of setting up a metal detector is simplified, and the sensitivity
Voltage Stabilizers For Home, Office &
increases by 5–7 cm, the current consumption also increased to 65 mA (depending
Small Business Use.
on the supply voltage and the search coil used).
wa=ordcontrol.com
2. Added power control circuit on a free element (IC 2.2) TL074. When the power
drops below 10V, the LED lights up. From 12 V to 10 V the circuit is still
operational with a slight adjustment of the “gain” regulator. Sensitivity with a
OPEN
decrease in nutrition, of course, also decreases. The adjustment of the threshold is
set by the resistance PR26 for the voltage of the battery that you use.
3. Changed the volume control scheme. Now the volume is adjusted more linearly. A
more powerful transistor is installed at the output of the T5 (BC640), allowing you
Diy Projects (Arduino, home…)
to connect both a headset and a speaker to the output. When headphones are
connected, the speaker is turned off.
4. The scheme can use a search coil consisting of three turns of a computer cable
“twisted pair” (without a screen), intended for laying indoors. You can also use a
coil of ordinary enamelled wire.
Watford Control
Voltage Stabilizers
Voltage Stabilizers For Home, Office & Small Business Use.
ADS
OPEN
NEW
Categories
« Previous
VINTIK-PI V2 metal detector
Next
VINTIK-PI V2 partlist » # Arduino projects (5)
# Pinpointers (7)
PI polonese AFRICA V4
Watford Control
Over 70 Years Of Experience
Voltage Stabilizers For Home, Office &
Small Business Use.
wa=ordcontrol.com
OPEN
AVR-910 programmer
Histats
Categories
# Arduino projects (5)
# Pinpointers (7)
# Programmers (14)
Site Stats
WEB-STAT
LIVE TRAFFIC ANALYSIS
Watford Control
Voltage Stabilizers
Voltage Stabilizers For Home, Office & Small Business Use.
wa=ordcontrol.com OPEN
Archives
August 2022 (7)
Watford Control
Voltage Stabilizers
Voltage Stabilizers For Home, Office & Small Business Use.
wa=ordcontrol.com OPEN
$
Privacy - Terms