0% found this document useful (0 votes)
225 views32 pages

Instrumentation Fittings

Uploaded by

Tochukwu Onuoha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
225 views32 pages

Instrumentation Fittings

Uploaded by

Tochukwu Onuoha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 32

Instrumentation

Process Control
Product Selection Guide
Analytical Systems
Pneumatic
Enclosures
Ball Valves Compression Fittings

Table of Contents
Introduction. . . . . . . . . . . . . . . . . . . . . . 2
Fittings . . . . . . . . . . . . . . . . . . . . . . . . . 4
Valves
Ball/Plug Valves . . . . . . . . . . . . . . . . 6
Check Valves . . . . . . . . . . . . . . . . . . 8
Filters. . . . . . . . . . . . . . . . . . . . . . . . .10
Relief Valves . . . . . . . . . . . . . . . . . . .11
Bleed and Purge Valves . . . . . . . . . .12
Metering Valves . . . . . . . . . . . . . . . . .13
Needle Valves . . . . . . . . . . . . . . . . .14
Manifold Valves . . . . . . . . . . . . . . . . .16 Instrumentation Group of Parker Hannifin
Diaphragm Valves . . . . . . . . . . . . . . .18 The Instrumentation Group of Parker Hannifin is
Regulators dedicated to being the global leader in the design,
manufacture and distribution of high quality, critical
Pressure Regulators . . . . . . . . . . . . 20
flow and ultra high purity components for the
Back Pressure Regulators. . . . . . . . 22
Petrochemical, Chemical Processing, Oil and Gas,
Vaporizing Regulators . . . . . . . . . . . 23
Power Generation, Water Analysis, Biopharmaceuti-
Flow Controllers . . . . . . . . . . . . . . . . . .24 cal, Semiconductor Manufacturing and Analytical
PFA/PTFE Products . . . . . . . . . . . . . . 25 Equipment industries.
Analytical Systems . . . . . . . . . . . . . . . 26 With 11 manufacturing plants and over 300 autho-
Hose/Tubing/Quick Couplings . . . . . . 28 rized distributors worldwide we can provide local
Tools and Accessories . . . . . . . . . . . . 29 inventory and technical support to our customers
anywhere in the world.
Sanitary and BioPharmaceutical . . . . 30
Parker Hannifin Corp.
Parker Hannifin is the world’s leading diversified
manufacturer of motion and control technologies
and systems, providing precision-engineered
solutions for a wide variety of commercial, mobile,
industrial and aerospace markets.
• 263 manufacturing sites around the world
• 8,200 distributors
• 400,000 customers
• 3,200 product lines
• Listed as PH on the NYSE

2
Valves Quick Couplings

Pressure Regulators Pipe Fittings

Premier Customer Service Heat Code Traceability


The Instrumentation Group is driven to provide our Parker Hannifin’s Instrumentation Group offers
customers with premier customer service through Heat Code Traceability (HCT) to meet or exceed all
on time delivery of quality products and value applicable specifications to assure our customers
added services such as the Veriflo Division Express that they are working with a high quality product. It
Service Program, custom assemblies and selection acts as an assurance for today and for tomorrow.
safety and installation training.
These specifications ensure high quality instrumen-
Engineering Excellence tation components for use in fossil fuel power plants,
By remaining focused on our customers we have chemical refineries, general instrumentation and
been able to introduce products that not only solve processing plants. Requirements are now emerging
our customer’s business challenges but address in the semiconductor and pharmaceutical industries.
specific industry needs and issues.
Not only are the materials continuously monitored,
Using the latest in virtual engineering tools, Parker but Parker adheres to a formal, documented Quality
Instrumentation engineers have reduced the time Assurance Program that controls manufacturing,
to develop, test and manufacture our latest product marking, testing and examination procedures,
innovations. cleaning and packaging.

To assist our customers with their designs, our 2D HCT is offered on the following quality stainless
and 3D CAD drawings are available online. steel components:
• CPI™ and A-LOK® Tube Fittings
• UltraSeal™ and VacuSeal™ Fittings
• Ball, Needle and Check Valves
• Instrumentation Pipe Fittings
• Orbital Tube Weld Fittings
• MiniButtweld™ Fittings
• Filters

3
Analytical Systems
Pneumatic
Enclosures
Ball Valves Compression Fittings
Fittings
Parker Instrumentation Tube Fittings are designed as leak-free
connections for process, power, and oil and gas instrumentation
applications handling liquids, gases and chemicals.

Parker’s instrument tube fittings have been engineered and


manufactured to consistently provide the highest level of reliability.
However, no system’s integrity is complete without considering the
critical link, tubing.

Proper tube selection and installation are key ingredients in


building leak-free reliable tubing systems. Parker instrument
fittings are designed to work on like materials therefore, stainless
steel fittings should be used only with stainless steel tubing. The
practice of mixing materials is strongly discouraged. The only
exception is brass fittings with copper tubing.

All working pressures have been calculated using the maximum


allowable stress levels in accordance with ANSI B31.3.

CPI™ Fittings (Catalog 4230/4233)


• Three piece simple design to work • Superior body seat surface finish to
on all instrumentation grade tubing seal gases and liquids
• Molybdenum Disulfide coated nuts • Single ferrule technology to provide
to prevent galling and provide excellent anti-vibration performance
lubrication • Excellent in high thermo cycling
• Single ferrule system treated with applications
Suparcase™ technology to insure
sealing

A-LOK® Fittings (Catalog 4230/4233)


• Industry standard design for all • Back ferrule is treated with
instrumentation grade tubing Suparcase™ technology to provide a
• Silver coated threads to strong mechanical grip on the tube
reduce galling • Industry double ferrule design for
system specifications

4
Valves Quick Couplings

Pressure Regulators Pipe Fittings

MPI™ Fittings (Catalog 4234)


• Compression fitting for medium • Molybdenum Disulfide coated nuts
pressure applications up to 15,000 to prevent galling and for higher
psi (1034 bar) temperature applications
• Inverted body and nut design for • Installation and rework time reduced
added strength with thick-wall tubing by 50%
• Longer thread area for improved
performance and resistance
to vibration

Phastite® (Catalog 4235-PH)


• Option for welded systems • No loose parts, supplied factory
• Simple assembly process provides pre assembled
high integrity connections, first time • Permanent push fit tube connector
every time with working pressures up to
• Installation time reduced to seconds 13,300 psi (917 bar)

Instrumentation Pipe Fittings (Catalog 4260)


• Manufactured from 316 stainless • All exposed threads protected to
steel for superior corrosion prevent damage
resistance • All pipe threads meet ANSI B1.20.1
• Available with NPT and ISO requirements
thread configurations

Welded Fittings (Catalog 4280)


• Available in socketweld, • Permanent, leak free connection
buttweld and automatic • For critical applications and high
buttweld connections temperatures such as steam
• Manufactured to meet ASME
Section III, and ANSI B31.1
and B31.7 codes

Fitting Working Pressure Connection Type Size Range


CPI™ Instrumentation Tubing* Single ferrule compression 1/16" - 2" Tube Diameter
A-LOK® Instrumentation Tubing* Double ferrule compression 1/16" - 2" Tube Diameter
MPI™ Up to 15,000 psi (1034 bar) Inverted compression 1/4" - 1" Tube Diameter
Phastite ® Up to 13,300 psi (917 bar) Permanent crimp* 1/4" - 1/2"
Weld-lok™ Instrument Tubing* Tube Socket Weld 1/8" - 2" Tube Diameter
Pipe Up to 6000 psi (414 bar) NPT Pipe Thread 1/16" - 2" Pipe Size
Pipe Adapters Up to 6000 psi (414 bar) NPT, BSPT, and BSPP Pipe Threads 1/8" - 1"
*Maximum suggested working pressure as indicated in Instrument Tubing Selection Guide Bulletin 4200-TS.

5
Analytical Systems
Pneumatic
Enclosures
Ball Valves Compression Fittings
Valves
Ball/Plug Valves
Parker ball and plug valves, with excellent temperature and
pressure characteristics, are well established for power, process
and instrumentation applications as on/off/diverter or selector
valves. Options include lockout devices and round, stainless steel
or T-bar handles. Cleaning options include O2, high purity and
grade A. Available with CPI™, A-LOK®, male and female NPT,
UltraSeal™ and VacuSeal™ end connections.

MB Series (Catalog 4121-MB)


• One piece compact barstock design • Patented seat design
• Center off position for 3-way • Standard drop-in replacement
• 2-way, inline, angle; 3-way, 4-way
and 5-way

B Series (Catalog 4121-B)


• 2-way, 3-way diverting or spring • Widest variety of seats, seals and
loaded 3-way selector designs port connections
• Wide temperature application range • Connections include CPI™,
-65°F (18°C) to +450°F (232°C) A-LOK®, male and female NPT,
• Rated for up to 6000 psi (413.7 bar) UltraSeal ™ and VacuSeal ™

SWB Series (Catalog 4125-SWB)


• Zero clearance body allows repairs • ISO-type actuator mounting design
in field • Available up to 1" full flow design
• Spring loaded seats and stem seals
• Fully enclosed body bolts

HB Series (Catalog 4121-HB)


• Compact FNPT version for tight • PEEK trunnion bearings provide
work areas high cycle life
• Full operating pressure in • 10,000 psi (689 bar) rating with
any port PEEK ™ seats
• Excellent for CNG

6
Valves Quick Couplings

Pressure Regulators Pipe Fittings

MPB Series Ball Valve (Catalog 4234)


• 2-way and 3-way ball valve for • Designed for 1/4 and 1/2 turn media
severe service applications shutoff or switching applications

PR Series (Catalog 4126-PR)


• Low operating torque • Typically used in laboratories
• Optional locking device, downstream • Most compact 90° actuated valve
vent and metal tee handles

Pneumatic/Electric Actuators (Catalog 4123)


• 60 Series pneumatic actuators • 70 and 80 Series electric actuators
provide 90° and 180° rotation in provide 90° and 180° actuation for
both double acting and spring return our B, MB, HB, SWB series ball
models valves.

HBV Series (Catalog 4190-HV)


• Suitable for the most demanding • True two piece design reduces body
applications in the oil, gas and leakage paths
process control industries • Complies with ANSI/ASME B16.34
• Integral compression ends available, requirements where applicable
eliminating taper threads and thread
sealants

End Connection
Temperature Cv Body Material Actuation Seat/Seal Material Size Range
Ethylene Propylene

Highly Fluorinated
Stainless Steel

Buna-N Rubber

Fluorocarbon
Fluorocarbon
Pneumatic

GRAFOIL®

Maximum
Electric
Manual

Rubber

Rubber
PCTFE
Brass

PEEK

Valve Model Product Operating


PTFE
Alloy

PFA

Groups Series Description Pressure Min Max Max Min Max Catalog
Mini Barstock 3000 psi -65 F 300 F 1/16 in 3/4 in
MB 11.00 x x x x x x 4121-MB
Ball Valve 207 bar -54 C 149 C 3mm 12mm
6000 psi -65 F 400 F 1/16 in 3/4 in
B Ball Valve 6.40 x x x x x x x x x x x x x 4121-B
414 bar -54 C 204 C 3mm 12mm
Swing Out Ball 2500 psi -65 F 600 F 1/4 in 1 in
SWB 35.00 x x x x x x x x x x 4125-SWB
Valve 172 bar -54 C 316 C n/a mm n/a mm
Ball/Plug 10000 psi -65 F 400 F 1/4 in 1/2 in
HB Ball Valve 1.00 x x x x x x x x x 4121-HB
Valves 690 bar -54 C 204 C 6mm 12mm
Med. Pressure 20000 psi -10 F 400 F 1/8 in 1 in
MPB 8.80 x x x x x x x x x 4234
Ball Valve 1379 bar -23C 204 C n/a mm n/a mm
3000 psi -10 F 400 F 1/8 in 1/2 in
PR Plug Valve 3.20 x x x x x x 4126-PR
207 bar -23C 204 C 3mm 12mm
6000 psi -65 F 450 F 1/8 in 1 in
HBV Ball Valve x x x x x x 4190-HBV
414 bar -54 C 232 C 6mm 25mm
7
Analytical Systems
Pneumatic
Enclosures
Ball Valves Compression Fittings
Valves
Check Valves Parker check valves are designed for uni-directional flow control
of fluids and gases in industries such as chemical processing, oil
and gas production and transmission, pharmaceutical, pulp and
paper, power and utilities.

C Series (Catalog 4130-C)


• Resilient, custom molded, • Cracking Pressures: 1⁄3, 1, 5, 10, 25,
seat design 50, 75 and 100 psi (.023, .069, .345,
• Back stopped poppet to minimize .69, 1.72, 3.45, 5.17, 6.9 bar)
spring stress • Port connections include male
and female NPT, CPI™, A-LOK®,
UltraSeal ™, VacuSeal ™, BSP,
SAE and Seal-Lok ®

CO Series (Catalog 4130-CO)


• Suitable for applications requiring • Cracking Pressures: 1⁄3, 1, 5, 10, 25,
high integrity leak rates and 50, 75 and 100 psi (.023, .069, .345,
re-sealing capabilities .69, 1.72, 3.45, 5.17, 6.9 bar)
• Seal integrity to 4 x 10 -9 std. • Available with highly fluorinated
atm-cc/sec fluorocarbon rubber
• Back stopped poppet to minimize • Only check valve with published
spring stress helium leak rate

CB Series (Catalog 4130-CB)


• Reduces maintenance while • Rugged ball design for demanding
improving performance require- applications
ments on dual fuel turbines • For high temperatures with highly
• Cracking Pressures: 1, 5, 10, 25, viscous media
50, 75, 100 and 120 psi (.023, .069,
.345, .69, 1.72, 3.45, 5.17, 6.9,
8.27 bar)

MPC Series (Catalog 4234)


• Variety of elastomeric poppet seals • MPI™, cone & thread and female NPT
• 5 psi (.345 bar) cracking pressure connections available
• For pressures up to 20,000 psi
(1379 bar)

8
Valves Quick Couplings

Pressure Regulators Pipe Fittings

MPCB Series (Catalog 4234)


• Metal to metal seat for use in • MPI™, cone & thread and female
applications that cannot accept NPT connections available
fluorocarbon rubber • For pressures up to 20,000 psi
• 5 psi (.345 bar) cracking pressure (1379 bar)

LC Series (Bulletin 4130-LC)


• For extreme temperature • The gravity assisted poppet uses
applications reverse flow to achieve a seal to
within 99.9% of forward flow

Cracking Body
Temperature Cv Pressure Material Seal Material End Connections
Fluorocarbon Rubber
Ethylene Propylene

Highly Fluorinated

Neoprene Rubber
Stainless Steel

Buna-N Rubber
Parkercarbon

Fluorocarbon
Parkerfill/

Maximum
Rubber

Metal
Brass

PTFE

Valve Model Operating


Groups Series Pressure Min Max Max Max Min Max Catalog
6000 psi -65 F 400 F 100 psi 1/8 in 1 in
C 6.70 x x x x x x x x 4130-C
414 bar -54 C 204 C 6.9 bar 3 mm 25 mm
6000 psi -15 F 400 F 100 psi 1/4 in 1/2 in
CO 2.70 x x x x x 4130-CO
414 bar -26 C 204 C 6.9 bar 6mm 12mm
Check 3000 psi -65 F 450 F 120 psi 3/8 in 3/4 in
CB 6.00 x x 4130-CB
Valves 207 bar -54 C 232 C 8.27 bar
20000 psi -10 F 400 F 5 psi 1/4 in 1 in
MPC x x x x x 4234
1379 bar -23C 204 C .345 bar
20000 psi -100 F 600 F 5 psi 1/4 in 1 in
MPCB x x 4234
1379 bar -73 C 316 C .345 bar
6000 psi -100 F 900 F 1/8 in 1/2 in
LC 2.30 x x 4130-LC
414 bar -73 C 482 C

9
Analytical Systems
Pneumatic
Enclosures
Ball Valves Compression Fittings
Valves
Filters For protection of instrumentation systems from undesirable
materials such as dirt, chips, scale and other foreign particles.
Options include Oxygen and special cleaning, bypass and integral
compression ported bypass.

F Series (Catalog 4130-F)


• Replaceable sintered 316 stainless • Optional 250 and 450 micron wire
steel filter element cloth filter elements

FT Series (Catalog 4130-FT)


• Filter elements are easily replaced • Replaceable sintered 316 stainless
without disconnecting the tube lines steel filter element
• Fast Loop bypass option enables a • Optional 250 and 450 micron wire
continuous self cleaning flow cloth filter elements

MPF Series (Catalog 4234)


• High pressure applications up to • Inline filters help protect valuable
20,000 psi (1379 bar) equipment in the process system
• Sintered 316 stainless steel filter disc • MPI™, cone & thread and female NPT
connections available

End
Temperature Cv Body Material Seal Material Connections
Highly Fluorinated
Propylene Rubber

Neoprene Rubber
Stainless Steel

Buna-N Rubber
Fluorocarbon

Fluorocarbon

Silver Plated
Nickel Alloy
Ethylene

Maximum
Rubber
Brass

PTFE

Valve Model Product Operating Micron


Groups Series Description Pressure Min Max Max Range Min Max Catalog
6000 psi -65 F 400 F 1/8 in 1 in
F Inline Filter 3.40 .5 to 500 x x x x x x x 4130-F
414 bar -54 C 204 C 3mm 25mm
6000 psi -100 F 900 F 1/8 in 1/2 in
Filters FT Tee Filter 2.50 .5 to 500 x x x x x x x x x 4130-FT
414 bar -73 C 482 C 6mm 12mm
Medium 20000 psi -10 F 400 F
MPF 0.59 .5 to 100 x x 1/4 in 9/16 in 4234
Pressure Filter 1379 bar -23C 204 C

10
Valves Quick Couplings

Pressure Regulators Pipe Fittings

Relief Valves
RL4 Series (Catalog 4131-RL)
• Handle for field maintenance • Manual override option with positive
• Externally adjustable pressure stem retraction is available for the
settings while valve is in operation full working pressure range
• Seven different springs • Color coded springs and labels
indicate spring cracking range

RH4 Series (Catalog 4131-RH)


• Eight springs • Preset from factory and comes with
• Manual override option with positive standard springs
stem retraction is available for
pressures up to 1500 psi (103 bar)

Body
Temperature Cv Material Seal Material End Connections
Highly Fluorinated
Propylene Rubber

Neoprene Rubber
Stainless Steel

Buna-N Rubber

Fluorocarbon

Fluorocarbon
Ethylene

Maximum
Rubber

Valve Model Operating


Groups Series Pressure Min Max Max Min Max Catalog
400 psi -70 F 400 F 1/4 in 1/4 in
RL 0.8 x x x x x x 4131-RL
28 bar -57C 204 C 6mm 8mm
Relief 6000 psi -70 F 400 F 1/4 in 1/4 in
RH 0.4 x x x x x x 4131-RH
Valves 414 bar -57C 204 C 6mm 8mm
20999 psi -10 F 400 F 1/2 in 9/16 in
MPRA 0.7 x x x x x 4234
1448 bar -23C 204 C n/a n/a

11
Analytical Systems
Pneumatic
Enclosures
Ball Valves Compression Fittings
Valves
Bleed and Purge Valves
BV Series (Catalog 4133-BP)
• Recommended for use in bleeding • Multi-valve manifolds or
hydraulic systems gauge/root valves
• Valve vents line pressure to
atmosphere or to containment

PG Series (Catalog 4133-BP)


• Vent hole in the cap bleeds, drains • Crimped cap ensures safe relief of
or purges system pressure system pressures
• Optional PTFE ball requires only
finger-tight torque to achieve a
leak-tight seal

Maximum Temperature Cv Body Material End Connections


Model Operating Stainless
Valve Groups Series Pressure Min Max 0.1 Brass Steel Alloy Min Max Catalog
10000 psi -65 F 850 F
BV x x x 1/4" 1/2" 4131-BP
690 bar -54 C 454 C
Bleed and 4000 psi -65 F 400 F
PG x x x 1/8" 1/2" 4131-BP
Purge Valves 276 bar -54 C 204 C
30000 psi -10 F 400 F
MPBV x 9/16" 9/16" 4234
2068 bar -23C 204 C

12
Valves Quick Couplings

Pressure Regulators Pipe Fittings

Metering Valves
N Series (Catalog 4170-N)
• Panel or in-line mounting • Valve stem threads not in contact
• Angle or in-line patterns with process fluid

HR Series (Catalog 4170-HR)


• Bubble tight shut-off capability • Seven optional valve stem tapers
• High resolution metering valve with
limited hysteresis

Temperature Cv Body Material Seat Material End Connections


Fluorocarbon Rubber
Ethylene Propylene

Highly Fluorinated

Neoprene Rubber
Stainless Steel

Buna-N Rubber

Fluorocarbon

Maximum
Rubber
Brass

Model Operating
Valve Groups Series Pressure Min Max Max Min Max Catalog
2000 psi -50 F 400 F 1/16 in 1/4 in
NS 0.040 x x x x x x x 4170-N
138 bar -46 C 204 C 3mm 6mm
1000 psi -50 F 400 F 1/8 in 1/4 in
NM 0.100 x x x x x x x 4170-N
Metering 69 bar -46 C 204 C 3mm 6mm
Valves 1000 psi -50 F 400 F 1/8 in 3/8 in
NL 0.200 x x x x x x x 4170-N
69 bar -46 C 204 C 6mm
250 psi -50 F 400 F 1/16 in 1/4 in
HR 0.100 x x x x x x x 4170-HR
17 bar -46 C 204 C 3mm 6mm

13
Analytical Systems
Pneumatic
Enclosures
Ball Valves Compression Fittings
Valves
Needle Valves
V Series (Catalog 4110- V)
• For positive leak tight shut-off and • Wide variety of size and end
regulation of fluids connections
• Choice of three stem types

SN6 Series (Catalog 4110-SN)


• Provides shut-off and coarse • In-line and angle patterns
regulation of liquids and gases • Ideal cylinder valve
• Choice of two stem types

VQ Series (Catalog 4110-VQ)


• In-line and angle patterns • Color-coded handles
• Panel mountable • Quick actuation for low pressure
applications

NP6 Series (Catalog 4110-NP)


• Choice of two non-rotating • Panel mountable
stem types • Fracture resistant nylon handle
• Packing below power threads

PV Series (Catalog 4110-PV)


• Roddable, straight through flow path • Bonnet lock plate resists accidental
• Gauge port option bonnet disengagement
• PEEK ™, Acetal, PFA seat materials
available

U Series (Catalog 4110-U)


• Stem packing below the threads • Panel mountable
isolates the thread lubricant from • Ideal for steam blowdown
the flow
• Severe service applications

14
Valves Quick Couplings

Pressure Regulators Pipe Fittings

HNV Series (Catalog 4190-HV)


• Compact needle valves • Available with integral A-LOK® or
• For applications up to 10,000 psi CPI™ connections, reducing leak
(690 bar) paths and reducing installation costs
• Soft tipped optional seating available
for gaseous applications

RPV Series (Catalog 4190-HV)


• For fluids containing high levels of • 100% repeatable bubble tight
contamination frequently found in shut off
oil and gas processing facilities
• Straight through flow pattern,
roddable design

HGV Series (Catalog 4190-HV)


• Up to 10,000 psig (690 barg) • Soft tipped optional seating available
• Compact single and multi port for gaseous applications
gauge valves

Body
Temperature Cv Material Actuation Seat/Seal Material End Connections
Ethylene Propylene

Highly Fluorinated
Stainless Steel

Buna-N Rubber

Silicon Rubber
Fluorocarbon
Fluorocarbon
Pneumatic

GRAFOIL®

Maximum
Manual

Rubber

Rubber
PTFE
Alloy

Model Operating
Valve Groups Series Pressure Min Max Max Min Max Catalog
6000 psi -65 F 450 F 1/8 in 3/4 in
V 1.30 x x x x x x x 4110-V
414 bar -54 C 232 C 3mm 12
6000 psi -65 F 450 F 1/4 in 1/4 in
SN6 0.30 x x x x 4110-SN
414 bar -54 C 232 C
300 psi -20 F 200 F 1/8 in 1/2 in
VQ 0.80 x x x x x x x x 4110-VQ
21 bar -29 C 93 C 3mm 10mm
6000 psi -70 F 700 F 1/4 in 3/8 in
NP6 0.60 x x x x x x x x 4110-NP
414 bar -57 C 371 C 6mm 8mm
6000 psi -20 F 400 F 1/4 in 3/4 in
PV 2.00 x x x x x x x 4110-PV
414 bar -29 C 204 C
6000 psi -65 F 1200 F 1/8 in 1 in
U 2.70 x x x x 4110-U
414 bar -54 C 649 C 6mm 25mm
Needle 20000 psi -65 F 800 F 1/4 in 1 in
MPN x x x x x 4234
Valves 1379 bar -54 C 427 C
30000 psi -10 F 400 F 9/16 in 9/16 in
MPGV x x x x x x 4234
2068 bar -23C 204 C
10000 psi -65 F 1000 F 1/4 in 1/2 in
HNV 0.35 x x x x x 4190-HV
690 bar -54 C 538 C 6mm 12mm
10000 psi -65 F 1000 F 1/4 in 1/2 in
HRPV 1.80 x x x x x 4190-HV
690 bar -54 C 538 C 6mm 12mm
10000 psi -65 F 1000 F 1/4 in 1/2 in
HGV 0.35 x x x x x 4190-HV
690 bar -54 C 538 C 6mm 12mm
6000 psi -65 F 1000 F 1/4 in 1/2 in
HVG 0.35 x x x x x 4190-HV
414 bar -54 C 538 C 6mm 12mm
10000 psi -65 F 1000 F 1/4 in 1/2 in
HYNV 0.35 x x x 4190-HV
690 bar -54 C 538 C 6mm 12mm
15
Analytical Systems
Pneumatic
Enclosures
Ball Valves Compression Fittings
Valves
Manifold Valves
CCIMS® (Catalog 4190-CCIMS)
• Close coupled solution for flow • Reductions in connections and leak
measurement applications paths of up to 85%
• Reductions in installation time of • Features phastfit ® for rapid
up to 75% transmitter removal and connection

Monoflange (Catalog 4190-FP)


• Compact double block and bleed • Configurable options include single
valves, featuring needle valves block, double block and double block
• Reducing installations cost while and bleed
improving safety through a reduction • Available in a range of materials
in leak paths including carbon steel, stainless
steel, duplex, alloy 625

Pro-Bloc® (Catalog 4190-FP)


• Compact double block and bleed • Available in a range of materials
valves, featuring needle or ball including carbon steel, stainless
valve options steel, duplex, alloy 625
• Reducing installations cost while
improving safety through a reduction
in leak paths
• Configurable options include single
block, double block and double block
and bleed

16
Valves Quick Couplings

Pressure Regulators Pipe Fittings

H-Series (Catalog 4190-PM/4190-FM)


• A comprehensive range of 2, 3 and 5 • Available in stainless steel and many
valve manifolds for flow applications exotic alloys, including Hastalloy,
• Available with integral PTFree ® 6Mo, MONEL®, and alloy 625
connections, reducing leakpaths and
installation cost

Hi-Pro Series (Catalog 4190-HBM)


• A complete range of ball valves • Working pressures up to 10,000 psi
10mm ball and needle valve (690 bar)
manifolds • Available with integral A-LOK® or
• Including block and bleed, and CPI™ connections, reducing leak
double block and bleed manifold paths and installation costs
options

Temperature Body Material Packing Seat/Tip End Connection Size Range


Stainless Steel
Carbon Steel

GRAFOIL®

Maximum
PEEK™

PCTFE
316SS
PTFE

PTFE
Alloy

Valve Model Product Operating


Groups Series Description Pressure Min Max Cv Min Max Catalog
double block ANSI 2500 -65 F 1000 F 1/4 in 1/2 in
MF x x x x x x x x 4190-FP
and bleed API 10,000 -54 C 538 C 6mm 12mm
double block ANSI 2500 -65 F 450 F 1/4 in 1 in
PB x x x x x x x 4190-FP
and bleed API 10,000 -54 C 232 C 6mm 25mm
2 valve manifolds 10,000 psi -65 F 1000 F 1/4 in 1/2 in
H2 0.35 x x x x x x x 4190-PM
- needle style 689 bar -54 C 538 C 6mm 12mm
Manifolds 3 valve manifolds 10,000 psi -65 F 1000 F 1/4 in 1/2 in
H3 1.80 x x x x x x x 4190-FM
- needle style 689 bar -54 C 538 C 6mm 12mm
5 valve manifolds 10,000 psi -65 F 1000 F 1/4 in 1/2 in
H5 0.35 x x x x x x x 4190-FM
- needle style 689 bar -54 C 538 C 6mm 12mm
2 & 3 valve
6000 psi -65 F 450 F 1/4 in 1/2 in
HBM manifolds ball x x x x x x 4190-HBM
414 bar -54 C 232 C 6mm 12mm
style

17
Analytical Systems
Pneumatic
Enclosures
Ball Valves Compression Fittings
Valves

Diaphragm Valves www.parker.com/veriflo

NOVA Series (Catalog 4515)


• General purpose, high cycle, • Handwheel, lever, and indicating
compact valve handwheel options
• For regulator outlet valve, gas
control panels and analyzer sampling
system applications

NOVAAOP (Catalog 4515)


• General purpose, high cycle, • Normally open and normally closed
compact valve • Various actuation pressures available
• For gas control panels and analyzer
sampling system applications

NV55 (Catalog 4515)


• General purpose, high flow
compact valve
• For flowing large volumes of
corrosive and non-corrosive fluids

18
Valves Quick Couplings

Pressure Regulators Pipe Fittings

944AOPHPNCSP (Catalog 4515)


• High pressure air operated valve • Opening function incorporates
• Reliable, accurate performance hydraulics

16 Series (Catalog 4515)


• High pressure valve for gas • Metal-to-metal diaphragm seal
manifold/box systems • Packless valve design
• 316L SST machined body design

Temperature Cv Body Material Actuation


Pneumatic
Stainless

Maximum
Manual
Brass

Steel

Alloy

Product Operating
Valve Groups Model Series Description Pressure Min Max 0.1 0.3 0.6 Catalog
Diaphragm 250 psig -15 F 150 F
NOVA Series x x x x x 4515
Springless 17 barg -26 C 66 C
Diaphragm 125 psig -15 F 150 F
NOVAAOP x x x x x 4515
Springless 9 barg -26 C 66 C
Diaphragm Diaphragm 250 psig -15 F 150 F
NV55 x x x x 4515
Valves Springless 17 barg -26 C 66 C
Diaphragm 3500 psig -40 F 150 F
944AOPHPNCSP x x x 4515
Springless 241 barg -40 C 66 C
3000 psig
16 Series Diaphragm Spring x x x x 4515
207 barg

19
Analytical Systems
Pneumatic
Enclosures
Ball Valves Compression Fittings
Regulators

Pressure Regulators www.parker.com/veriflo

NPR4100 (Catalog 4511)


• Negative pressure regulation • For delivery of low pressure gases
• Internally threadless design from liquid sources
• Convoluted Hastelloy C-22 ® • White knob indicates negative
diaphragm pressure

IR4000 Series (Catalog 4511)


• Internally threadless design • Seals available for nitrous oxide and
• Convoluted Hastelloy C-22 ® hydrocarbon applications
diaphragm • Low dead volume
• Integral diaphragm stops prevent • General purpose for instrument/
oil canning analyzer and semiconductor
applications

IR5000 Series (Catalog 4511)


• Internally threadless design • Greater sensitivity for precise
• Large convoluted Hastelloy pressure control
C-22 ® diaphragm • For analyzer system gas
management and instrument
calibration

HFR900 (Catalog 4511)


• High flow regulator • For corrosive and noncorrosive
• Self-contained replaceable fluid applications
valve seat

20
Valves Quick Couplings

Pressure Regulators Pipe Fittings

IR6000 Series (Catalog 4511)


• Dual stage regulator • Virtually eliminates supply
• Internally threadless design pressure effect
• Convoluted Hastelloy C-22 ® • Provides cylinder gas pressure
diaphragm reduction in refineries, process
analytical systems and specialty
gases

APR66 (Catalog 4511)


• High pressure piston sensing • Pressures up to 6000 psig
regulator (413.7 barg)
• Low actuating torque

Quantum 959 (Catalog 4511)


• Tied diaphragm design to minimize • Metal to metal diaphragm seal
regulator creep
• Internally threadless design

DM3000 (Catalog 4518)


• Miniature pressure regulator for • No threads in wetted area
gas instrumentation applications • Critically dampened to improve
• ANSI/ISA SP76.00.02 modular flow stability
surface mount interface • Faster purge times

Pressure Cv Body Material Connections

Regulator Model Maximum Maximum Outlet Hastelloy Min Max Face Seal
Groups Series Type Inlet Pressure Pressure Min Max 316L SS Brass C-22 ® MONEL® FNPT FNPT Compression or Tube Catalog
Absolute 250 psig -26 in Hg to 10 psig
NPR4100 0.02 0.15 x x x x 1/8" 3/8" x 4511
Pressure 17 barg -1.8 in Hg to .7 barg
General 4000 psig 500 psig
IR4000 0.02 0.15 x x x x 1/8" 3/8" x 4511
Purpose 276 barg 34 barg
3500 psig 250 psig
IR5000 Sensitive 0.02 0.15 x x 1/8" 1/2" x 4511
241 barg 17 barg
Single 500 psig 150 psig
HFR900 High Flow 0.85 0.85 x x 1/4" 1/2" x 4511
Stage 34 barg 10 barg
High 6000 psig 6000 psig
APR66 0.04 0.04 x x 1/8" 1/4" 4511
Pressure 414 barg 414 barg
Quantum Tied 3500 psig 150 psig
0.04 0.20 x x 1/4" 1/4" x 4511
959 Diaphragm 241 barg 10 barg
Surface
DM3000 x 4518
Mount 21
Analytical Systems
Pneumatic
Enclosures
Ball Valves Compression Fittings
Regulators

Back Pressure Regulators www.parker.com/veriflo

ABP1 (Catalog 4510)


• Reduce contamination and accu- • Convoluted Hastelloy C-22 ®
rately control back pressure diaphragm
• Internally threadless design • Integral diaphragm stop

ABP3 (Catalog 4510)


• Internally threadless design • Large convoluted Hastelloy
• Provides sensitive pressure C-22 ® diaphragm
adjustments • Integral diaphragm stop

BPR50 (Catalog 4510)


• For use with corrosive and • Piston sensed high pressure back
non-corrosive fluids pressure regulator
• Adjustable from 100 psi (6.7 bar)
to 2000 psi (138 bar)

Pressure Cv Body Material Connections

Regulator Maximum Inlet Hastelloy Min Max


Groups Model Series Type Pressure Min Max 316L SS C-22 ® Monel® FNPT FNPT Catalog
Up to 500 psig
ABP1 General Purpose 0.06 0.30 X X X 1/8" 1/4" 4510
34 barg
Back Up to 60 psig
ABP3 Sensitive 0.06 0.30 X X 1/8" 1/4" 4510
Pressure 4 barg
Up to 2500 psig
BPR50 High Pressure 0.45 0.45 X 1/4" 1/4" 4510
172 barg

22
Valves Quick Couplings

Pressure Regulators Pipe Fittings

Vaporizing Regulators www.parker.com/veriflo

AVR3 (Catalog 4512)


• Steam heat design • Internally threadless design
• Field serviceable heat • Internal liquid volume only .5cc
transfer element • Convoluted Hastelloy C-22 ®
diaphragm

AVR4 (Catalog 4512)


• Electrical heat design • Internally threadless design
• Field serviceable heat • 120v or 240v, 50/60 Hz
transfer element • Convoluted Hastelloy C-22 ®
• CSA, Cenelec, and ATEX certified diaphragm

Pressure Cv Body Material Connections

Regulator Maximum Inlet Maximum Outlet Min Max


Groups Model Series Type Pressure Pressure Min Max 316L SS MONEL® FNPT FNPT Catalog
4000 psig 500 psig
AVR3 Steam Heated 0.06 0.06 X X 1/8" 1/8" 4512
Vaporizing 276 barg 34 barg
Regulators Electrically 4000 psig 500 psig
AVR4 0.06 0.06 X X 1/8" 1/8" 4512
Heated 276 barg 34 barg

23
Analytical Systems
Pneumatic
Enclosures
Ball Valves Compression Fittings
Flow Controllers

www.parker.com/porterinstrument

Porter Instrument specializes in the design and manufacture of


precision instruments for the measurement and control of low flow
gases and liquids.

Gas Mass Flow Controllers (Catalog FM-441)


• Responds to a step change in • Models available with flow ranges of
setpoint in less than one second 0-5 sccm to 0-1000 slpm N2
• Actual flow is stabilized within 2 • High pressure models have operating
seconds, virtually without overshoot pressures to 3000 psig (207 barg)

Digital Liquid Mass Flow Controllers (Bulletin FM-998)


• Thermal measurement system • Exclusive control circuitry, combined
yields accurate measurement with a piezoelectric-actuated control
with less than a 5°C increase in valve, provides fast, stable control at
fluid temperature low flow rates

Flowmeters (Catalog FM-1058)


• Variable area flowmeters include • Interchangeable flow tube assem-
65mm and 150mm scale length blies and valves allow configuration
tube assemblies changes without removal from
• Available in either forged body or process system
side-plate construction

Instrument Pressure Regulators (Catalog FM- 1057)


• All models are direct acting, • Available with special port locations,
non-relieving and are cleaned for manifold mount configurations, or
analytical instrument service with the regulator integrated into a
• Designed specifically to provide high larger, multi-functional package
resolution control at the low flow
rates typical in instrumentation
applications

24
Valves Quick Couplings

Pressure Regulators Pipe Fittings


PFA/PTFE Products
Fluoropolymer
Components
www.parker.com/partek (Catalog PSM Partek)
Durable, leak free Partek products are used in a Parflare PFA Tube Fittings: Parflare fittings provide
low dead volume, which decreases the possibility of
variety of industries, including semiconductor manu- particle entrapment and bacterial growth.
facturing, chemical/food/pharmaceutical/biomedical
Pargrip PFA Tube Fittings: Perfect for applications
processing, as well as analytical instrumentation. where ease of assembly is a requirement. Grooved
tubing is not required.
Partek fluoropolymer products are recommended Parbond PFA Fusible Pipe Fittings: Parbond
for applications that encounter pressures below fittings welded design eliminates threaded connections
120 psig (8.27 barg), and corrosive media at and entrapment areas and creates a leak free connection.

temperatures up to 400°F (204°C). Fluoropolymer PFA Pipe Fittings: Available in a variety of configura-
tions, all with standard NPT threads.
valves and fittings offer corrosion protection and are
used to ensure media/system purity. The wetted PFA Valves, Gauge Protectors, Thermocouple
Fittings and Spray Guns: High cycle life, all
surfaces of all products are of chemically inert fluoropolymer construction, with application tested and
corrosion resistant PFA or PTFE. Partek products proven designs.
are available from 1⁄8" up to 1" in size. PTFE Valves, Regulators, and Flowmeters:
Wetted areas are manufactured from fluoropolymer
material which offers unmatched corrosion protection
and high cycle life.

25
Analytical Systems
Pneumatic
Enclosures
Ball Valves Compression Fittings
Analytical Systems
Our chemical/petrochemical process analytical systems provide
a sound model for both North American and European markets,
adapting with minor modifications to environmental segments, as
well as laboratory and pilot plant markets. They also serve as a
basis for power and pharmaceutical analytical segments. No other
single supplier can offer a more complete, advanced, or adaptable
sample analysis system.

Vent Recovery Panel (Bulletin 4141-VR)


• Pre-engineered compact instrument • System adjusts for variations in gas
panel that includes fittings, valves, supply pressures and flows
stream switching valve, regulators,
and gauges

Vent Master™ (Catalog 4142-VM)


• Pre-engineered compact instrument • Creates a stable pressure within the
panel that includes regulators, analyzer shelter vent header system
gauges, rotometer, an eductor and • Provide analysis accuracy with .06%
a separate pressure controller over a vent header flow of 0-18SLPM

26
Valves Quick Couplings

Pressure Regulators Pipe Fittings

IntraFlow™ (Catalog 4250)


• Modular instrument system • Vacuum to 500 psig (34 barg)
• ISA/ANSI SP 76.00.02 compliant • System design software available
• Every component is upgradeable to
Gen 2 & 3 NeSSI Technologies

R-max™ (Catalog 4140-R)


• Surface mount technology for • Low pressure actuation of
stream switching valves valves-40 psig (-2.76)
• Low internal volume to reduce • Rated from vacuum to
system purge time 500 psig (34 barg)

ChangeOver System (Catalog 4511)


• Compact turnkey module designed • Audio/visual alarm annunciator
for continuous gas management available
• Optional outlet regulator to control • Available in 316L stainless steel
application specific outlet pressure and brass
• Aluminum panel is standard • Suitable for oxygen service

27
Analytical Systems
Pneumatic
Enclosures
Ball Valves Compression Fittings
Hose/Tubing/Quick Couplings

Push-Lok® Hose (Bulletin 4281-B1-US)


• Unique seal ensures reliability and • Inner liner is an extruded, synthetic
durability for clean-environment use rubber, resistant to petroleum-base
• No clamps or special tools required oil, air and water
for installation

Quick Couplings (Catalog 4220)


• Spill-free designs virtually eliminate • Double shut-off flush mating valves
fluid loss upon disconnection and suitable for seal off media in
minimize air inclusion during corrosive applications
connection • Working pressures from
• Minimize air inclusion during 300 psi (21 bar) to
connection 5,000 psi (3445 bar)

Stainless Steel Metal Hose (Catalog 4690-MH)


• For extreme conditions where other • Frequently used for the conveyance
hoses fail of liquid nitrogen
• For temperatures up to 1,500°F • Provides the lowest permeation rate
(816°C) of any hose available

Multitube® Instrument and Heat Trace Tubing


(Catalog 4200-M-1)
• Available in a variety of • Materials include copper, stainless
configurations steel, metal alloys and PFA/PTFE
• For containment, transmission and
control of pneumatic signals, gases
and liquids

28
Valves Quick Couplings

Pressure Regulators Pipe Fittings


Tools and Accessories

Tube Fabrication Equipment (Catalog 4290)


• High quality hand benders, tube • Par-Lok ® wrenches with 360°
cutters, deburr tools and preset tools snap-action for flexibility
• Tube benders from 1 ⁄ 8" to 1" size • Preset installation kits for assem-
• Tube cutter rated for 316 stainless bling tube fittings in close spaces
steel tubing

Sample Cylinders (Catalog 4160-SC)


• 1800 psig (124 barg) DOT rated • ANSI/ASME B1.20.1 internal pipe
sample cylinders threads
• Stainless steel construction

Brass Push-to-Connect Fittings (Bulletin 3531-QRG/USA)


• Prestolok ® brass and Prestolok II® • Equipped with stainless steel grab
composite push-to-connect fittings rings eliminating need for tube
are designed for use with nylon, supports
polyethylene, polyurethane and • No tools required for
soft metal tubing installation
• Ideal for pneumatic • Designed for side-loading
applications

29
Analytical Systems
Pneumatic
Enclosures
Ball Valves Compression Fittings
Sanitary and BioPharmaceutical
Parker Performance Stainless is a complete line of sanitary
fittings, valves and related flow components for use in a variety
of hygienic processing applications. These products meet the
stringent standards required by processors in the food, beverage,
dairy, biopharm and health & beauty industries.

Sanitary Fittings (Catalog 4270)


• Buttweld, clamp, bevel seat, I-line, • A full line of adapters for threaded,
and other fitting styles available flanged and socket weld connections
• Unpolished I.D. and unpolished O.D. also available
Both I.D. and O.D. are mill or tumble • Sanitary tubing and tubing hangers
finished available to complete any project

Valves and Flow Components (Catalog 4270-VFC)


• Sanitary versions of sample, ball, • Valves are precision manufactured
butterfly and check valves available from heat traceable materials and
• A complete line of pneumatic and designed to perform under the most
electric actuators and control exacting conditions
accessories. Choose from traditional • Available with a variety of elastomers
rack-and pinion style or stainless and other customer-specified
steel wash down versions configurations to ensure a perfect
fit within any processing system

30
Valves Quick Couplings

Pressure Regulators Pipe Fittings

Product Selection Guide CD Operating Instructions


Parker’s Product Selection Guide CD contains If Acrobat Reader is found, the opening screen of
electronic versions of all catalogs referenced in the CD will appear. From the opening screen, you
the Product Selection Guide document as well as can view this Product Selection Guide, go to specific
additional Parker Instrumentation product lines. product categories or choose a specific catalog.

To use the CD If Acrobat Reader is not found, it will be installed on


Simply place the disc in your CD drive. your hard drive and then the opening screen of the
CD will appear. From the opening screen, you can
An autorun program on the CD will search your view this Product Selection Guide, go to specific
computer for the Adobe® Acrobat ® Reader ® product categories or choose a specific catalog.
program, version 5.0 or higher.

Hastelloy C-22 ® is a registered trademark of Haynes International, Inc.


Hastalloy ® is a registered trademark of Haynes Industries, Inc. 31
PEEK™ is a registered trademark of Victrex plc.
MONEL is a trademark of the Special Metals Corporation.
GRAFOIL is a registered trademark of GrafTech International.
Parker Hannifin Corp. Instrumentation Group Divisions
Instrumentation Products Divisions Porter Instrument Division
Connectors Operation 245 Township Line Road
1005 A Cleaner Way Hatfield, PA 19440
Huntsville, AL 35805 Phone: (215) 723-4000
Phone: (256) 885-3800 Fax: (215) 723-2199
Fax: (256) 881-5072 www.parker.com/porterinstrument
www.parker.com/ipdus
Veriflo Division
Valve Operation
250 Canal Boulevard
2651 Alabama Highway 21 North
Richmond, CA 94804
Jacksonville, AL 36265
Phone: (510) 574-9590
Phone: (256) 435-2130
Fax: (510) 232-7396
Fax: (256) 435-7718
www.parker.com/veriflo
www.parker.com/ipdus
Europe Veriflo Division Partek Operation
Riverside Road 7075 East Southpoint Road
Pottington Business Park Tucson, AZ 85706
Barnstaple, Devon EX31 1NP Phone: (520) 574-2600
Phone: (44) 1271-313131 Fax: (520) 574-2700
Fax: (44) 1271-373636 www.parker.com/partek
www.parker.com/ipd

Parker Worldwide Product Information


U.S.: 1-800-C-Parker (1-800-272-7537)
Europe: 00-800-C-Parker-H (00800-27-27-5374)

To find your local distributor: www.parker.com


Your local Parker Instrumentation Group authorized distributor:

ING Process PSG


25M 02/07 AMD

You might also like