Kentec Catalogue11-12

By Appointment to Her Majesty The Queen
Supplier of Fire Detection Equipment

Kentec Electronics Ltd. Dartford, Kent. DA1 1JQ
Leading in
Fire Detection
Control Systems
For Over 25 Years
Product Catalogue 2011 - 2012

Leading in Fire Detection Control Systems
For Over 25 Years
Miscellaneous
Custom
Power Supplies
Extinguishant
Conventional
Analogue Addressable
Leading in Fire Detection Control Systems
For Over 25 Years
Established over 25 years ago, Kentec Electronics Ltd. has
evolved into one of the worlds leading independent fre
control panel manufacturers. Over the years the Kentec
name has become synonymous with World class product,
great service and excellent support. Based in the UK, Kentec
is a truly global supplier, exporting control equipment
to over 80 countries Worldwide, and in many diferent
languages.
In keeping with our philosophy of in-house production we
continue to invest heavily in state of the art manufacturing
equipment for all areas of the business. This has allowed
us to react quickly to customer requirements and market
trends whilst maintaining our position at the forefront of
Control panel design & manufacture. As an example of this,
in early 2011, we opened our new World Class electronics
manufacturing facility in Dartford. With this new facility
we have been able to increase our capacity by over 30%
resulting in even better customer support.
Kentec ofers the most comprehensive range of
conventional, analogue addressable fre detection and
extinguishant control panels available. Our custom build
service is also highly regarded in the industry and utilises our
expertise in control panel technology to design and build
high quality product to exacting customer specifcations.
Marine products are now an important part of our product
portfolio and we have now introduced the all new
Taktis product range. Taktis will become one of the most
comprehensive and dynamic products within the industry
with its focus on added value and advanced technology.
At Kentec we believe that the quality of our products should
be paramount; rigorous testing procedures are employed
at every stage of the manufacturing process to ensure that
all equipment is supplied to the highest standards. For this
reason we are confdent in ofering an industry leading
3 years warranty on all product that we supply. We also
understand that service is a key part of how a manufacturers
quality is judged. To this end we have invested extensively
not only in our manufacturing facilities but in our support
team including technical support and training.
As part of our customer care Kentec ofers frst rate technical
support facilities and a dedicated team of highly trained
personnel provide direct telephone assistance; this is backed
up by regular technical e-mail bulletins and on-site and of-
site customer specifc training.
Kentecs products are tested and approved to international
standards such as EN54, EN12094, UL and FM.
Kentec achieved Investors in people accreditation in 2004.
Our management systems are ISO 9001:2008 approved
and our policy for environmental awareness was ofcially
recognized in 2007 when we gained our ISO 14001
certifcation from BSI. In 2008 Kentec was proud to be
awarded the Royal Warrant of Appointment by Her Majesty
the Queen.
P
a
g
e
s

8
-
4
5
P
a
g
e
s

4
8
-
6
1
P
a
g
e
s

6
4
-
8
1
P
a
g
e
s

9
2
-
1
0
1
P
a
g
e
s
1
0
4
-
1
0
9
P
a
g
e
s

8
4
-
8
8
Page 4
We also have a full range of bending,
cropping, studding and welding
plant equipment allowing us the
capability and exibility to produce
single items or volume product.
Integral to our sheet metal
fabrication department is a state of
the art computer controlled Amada
break press. A comprehensive range
of tooling is available in this key area
of our manufacturing process.
Our versatile painting department
features a semi automatic powder
coating plant. Introduced in 2009 it
continues to provide all our metal
component nishing needs.
At the heart of our business lies the many in-house facilities that are at our disposal. From the
initial design process, to sheet metal fabrication, to powder coating and printing through to
panel construction, we have full control at every stage of our manufacturing process allowing
us to oer industry leading delivery times and with quality that you can have condence in. In
March 2009 we opened a new facility in Dartford which now houses the metal fabrication,
paint and print shops, and has more
than tripled our overall size. This was
further enhanced with the
commissioning of our new World Class
electronics manufacturing facility in
early 2011.
Our In-house facilities...
Overview
Page 5
We also have a full range of bending,
cropping, studding and welding
plant equipment allowing us the
capability and exibility to produce
single items or volume product.
Integral to our sheet metal
fabrication department is a state of
the art computer controlled Amada
break press. A comprehensive range
of tooling is available in this key area
of our manufacturing process.
Our versatile painting department
features a semi automatic powder
coating plant. Introduced in 2009 it
continues to provide all our metal
component nishing needs.
At the heart of our business lies the many in-house facilities that are at our disposal. From the
initial design process, to sheet metal fabrication, to powder coating and printing through to
panel construction, we have full control at every stage of our manufacturing process allowing
us to oer industry leading delivery times and with quality that you can have condence in. In
March 2009 we opened a new facility in Dartford which now houses the metal fabrication,
paint and print shops, and has more
than tripled our overall size. This was
further enhanced with the
commissioning of our new World Class
electronics manufacturing facility in
early 2011.
Our In-house facilities...
Overview
Our printing department has recently
been subject to a complete
transformation moving from a traditional
silk screen printing process to state of the
art digital printing. In late 2010 we
acquired an OCE Arizona digital UV large
format printer. The introduction of the
Arizona printer has revolutionised the
department oering increased capacity,
consistency and quality.
We are now seeing over 95% of
products printed using this new process
and we will be moving forward to oer
more attractive and visually pleasing
products as we employ more of the
features oered by the Arizona printer.
All panels supplied by Kentec are
manufactured and assembled
in-house in the U.K. Before despatch
all panels undergo a rigorous testing
procedure, they are then given a nal
visual inspection.
Electronic Sub assemblies are
produced using our fully automated
state of the art surface mount
production line. We systematically
utilise both Optical and electrical
automatic test equipment to ensure
each and every assembly is built to the
same high standard and is fault free.
To underpin our industry leading
in-house manufacturing activities we
employ teams of qualied and
experienced mechanical, software
and electronic hardware developers
and technicians dedicated to both
new product developments and
existing ongoing product support.
Analogue
Fire Detection
Control Equipment
Pages 8-45
Analogue
Fire Detection
Control Equipment
Pages 8-45
Syncro AS
Single or Two Loop Analogue
Addressable Fire Control Panels
Page 8-9
Syncro Guide
PC Graphics Software
Page 28-29
Syncro
Multi Loop Analogue
Addressable Fire C/Ps
Page 10-13
Syncro Guide Repeater
Providing Repeater Facility for any
GUIDE System
Page 30-31
Syncro Response
Analogue Addressable Fire Control
Panel Repeaters
Page 14-15
MIOU/LIOU
Multi Input/ Output Unit
(Standard and Light versions)
Page 32-33
Syncro Focus
Network LCD Repeater for
Syncro System
Page 16-17
Syncro I/O
A range of I/O boards and
enclosures
Page 34-43
Syncro View
Serial LCD Repeater for
Syncro System
Page 18-19
Syncro Ident
Programmable LED
Indication Panels
Page 20-21
Syncro Matrix
Intelligent Fire Alarm Mimic
Display System
Page 22-23
Syncro Net
Syncro Network Interface
Page 24-25
Syncro Comms
Syncro Communications Module
Page 26-27
OpenConnect
BMS Communications Interface
Page 44-45
I M
PROVED!
I M
PROVED!
I M
PROVED!
N
EW
!
Page 8
Single or Two Loop Analogue
Addressable Control Panel
Features
Product Overview
Syncro AS is a versatile range of open protocol fre alarm
control panels compatible with existing Syncro fre alarm panel
technology.
Available with one or two detection loops capable of hosting
up to 126 devices (Apollo), 240 devices (Argus Vega) or 127
devices (Hochiki). Syncro AS uses leading edge microprocessor
based electronics to provide a fexible control system with high
reliability and integrity.
Suitable for all small to medium sized fre detection systems,
Syncro AS control panels can be expanded and networked to
become part of much larger systems if the need arises,
therefore providing a future proof solution for any installation.
With its large graphical display and ergonomic button and
indicator layout, the Syncro AS control panel is simple and
straightforward to understand for installers, commissioning
engineers and end users alike.
Comprehensive day/night mode facility
Programmable one touch test mode
Powerful and versatile cause & efect programming
Cause & efect wizard including:
Cause & efect action
Disablement confguration
Test mode confguration
16 zonal LED indicators

2 programmable sounder circuits

5 programmable inputs

3 programmable relays

3A power supply

Large graphic display

Real time clock
Expandable from 1 to 2 loops*
Certifed to EN54-2/ EN54-4

Up to 512 additional programmable I/O
via Syncro I/O modules *

Powerful, network wide cause and
efects *

Sensitivity adjustment and Drift
Compensation

Can be networked with Syncro control
panels *

Compatible with Focus and View
repeaters *

Supports Apollo, Argus Vega and Hochiki
protocols

Same look and feel as Syncro range

Stores 500 last events in event log

Dial up modem connection available

Compact, stylish enclosure

Installer friendly, removable equipment
chassis

Diferent language and character set
variants available

Fully EN54-2 and EN54-4 compliant
improved front loading Printer option * **
Confg. Features
Model No. #80161M2
* These items not available on
Syncro AS Lite panel
** Can be ftted to M3 size enclosure only
(Also backward-compat ible
wit h Series 90 det ect ors)
R
AS
Syncro
BS- EN54- 2
BS- EN54- 4
KM 73505
I
M
P
R
O
V
E
D
!
Specifcation
The manufacturer reserves the right to amend specifcations without prior notice Page 9
Construction
Finish
Colour - lid & box
Colour - controls plate & labels
Display
Mains voltage supply

Mains supply fuse
Power supply DC rating
Aux 24V supply
Battery (24 hour standby)
Fault contact rating
Fire contact rating
Alarm contact rating
Sounder output rating
Detection loop
Detector protocols

Printer port
Serial expansion port

PC port
Network connection

Remote Silence input (SIL)
Remote fault input (FLT)
Remote reset input (RES)
Remote alert input (INT)
Remote evacuate input (CNT)
Download lead
Confguration
PC graphics
Modem
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Technical
Panels
Product Code
A80161M2
A80162M2
A80161M3
A80162M3
A80161M3P
A80162M3P
V80161M2
V80162M2
V80161M3
V80162M3
V80161M3P
V80162M3P
H80161M2
H80162M2
H80161M3
H80162M3
H80161M3P
H80162M3P
Protocol
Apollo
Apollo
Apollo
Apollo
Apollo
Apollo
Argus Vega
Argus Vega
Argus Vega
Argus Vega
Argus Vega
Argus Vega
Hochiki
Hochiki
Hochiki
Hochiki
Hochiki
Hochiki
Zones
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
Size (mm)
385 x 310 x 90 *
385 x 310 x 90 *
385 x 520 x 110
385 x 520 x 110
385 x 520 x 110
385 x 520 x 110
385 x 310 x 90 *
385 x 310 x 90 *
385 x 520 x 110
385 x 520 x 110
385 x 520 x 110
385 x 520 x 110
385 x 310 x 90 *
385 x 310 x 90 *
385 x 520 x 110
385 x 520 x 110
385 x 520 x 110
385 x 520 x 110
* Flush versions are available to order (See price guide).
Loops
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
Printer
No
No
No
No
Yes
Yes
No
No
No
No
Yes
Yes
No
No
No
No
Yes
Yes
Lite Panels
Product Code
LA80161M2
LV80161M2
LH80161M2
Protocol
Apollo
Argus Vega
Hochiki
Zones
16
16
16
Size (mm)
385 x 310 x 90
385 x 310 x 90
385 x 310 x 90
Loops
1
1
1
Printer
No
No
No
DS47.06.2011
1.2mm mild sheet steel
Epoxy powder coated
BS 00 A 05 grey - fne texture
RAL 7047 light grey - satin
8 lines of 40 characters graphic LCD
110 or 230V AC 50 or 60 Hz.
(specify when ordering, default is 230V)
1.6A 250V
24V 3 Amps
Fused at 500 milliamps
9Ah 12V (2 per panel) (non-networked)
30V DC 1 Amp
30V DC 1 Amp
30V DC 1 Amp
Fused at 1 Amp each
400 milliamp output
Apollo (S90, XP95, Discovery),
Argus Vega or Hochiki ESP
Serial RS232
Serial RS485
(Compatible with all Syncro I/O modules)
Serial RS232
RS485 - Up to 64 panels via fully fault tolerant
optional network card
Switched -ve
Switched -ve
Switched -ve
Switched -ve
Switched -ve
Standard S187, X187LS economy
Via Loop Explorer PC utility
Via Guide systems
Optional dial up modem for remote diagnostics
(Can be ftted to M3 size enclosure only)
Product
Code
K555
K560
K547
K546
K545

K556P

K768AS
K18002
B3472
Description
Fault tolerant Network interface card
16 channel input/output board
8 way relay extender board
6 way sounder extender board
4 way conventional detection
zone board
Modem module (PSTN)
(M3 size enclosure only)
Printer Module - New front loading
feature (M3 size enclosure only)
Retroft Vision Window Door
(M2 size enclosure only)
Thermal Printer Paper Roll
Options
Page 10
Fire Control Panels
Features
Product Overview
Available with 2 or 4 detection circuits, each capable of hosting
devices (Hochiki). Syncro uses the most advanced
microprocessor technology to provide a control system of
extremely high integrity.
Syncro can be confgured to suit all types of system, from the
most simple, to the highly complex. Its fully integrated and
secure network provides an intelligent interface for building
control.
A large area graphic display ensures that information is
presented in plain language with detailed extra help available
by pressing a help button.
Syncro supports three of the most widely used communication
protocols produced by leading fre detector manufacturers and
employs daily calibration routines to ensure that the system is
always at optimum performance.
Confg. Features
2 or 4 loop versions as standard
(for 6 - 8 loop versions see DS57 page
12-13)
Larger enclosure available (fts 24A/H SLAs)
Loopless panel option (repeater)
0, 16, 48, or 96 zone indicators
Option for Enable Control keyswitch
Fully supports Apollo, Argus Vega
& Hochiki protocols
Network up to 64 panels/repeaters
4 programmable sounder circuits as
standard
5.25 amp power supply to EN54 part 4
In built help and alarm information
screens
Real time clock
loop powered sounders and beacons
Supports Apollo Ancillary Base Sounder
Supports Apollo Intelligent Beam
Stylish enclosure design
Soft-touch tactile buttons
2 programmable function buttons
3 programmable front panel mounted
LEDs
Improved Front loading Printer (optional)
Up to 512 programmable inputs/outputs
per panel via 2 wire RS485 serial link
(optional)
Simple Windows graphical confguration
utility
Model No. EN#6396403P
Syncro
R
BS- EN54- 2
BS- EN54- 4
KM 73505
I
M
P
R
O
V
E
D
!
Specifcation
Construction
Finish
Colour - lid & box
Display
Detection circuits (Loops)
Zone LEDs
4 sounder circuits
Fire contact
Alarm contact
Fault contact
Programmable relay 1
Fire routing output
Fault routing output
Extinguisher output
Fault input
Reset input
Intermittent input
Continuous input
Silence input
Programmable input 1
Auxiliary 24V DC output
System fuse
Mains fuse
Operating Temperature
Operating humidity
Day/night modes
Input delays
Output delays
2 programmable function
buttons
3 programmable indicators
Network (option)
Printer (option)
Download lead
Epoxy powder coated
2 or 4 (400mA each)
0, 16, 48, or 96 (up to 500 software zones)
Each fused at 1 Amp (total load 2 Amp)
Volt free 1 Amp 30V DC
Monitored-voltage reversing, fused at 500mA
Monitored-voltage reversing, fused at 500mA
Monitored-voltage reversing, fused at 1A
Volt free contact input signals fault
Volt free contact input resets panel
Volt free contact input pulses sounder outputs
Volt free contact input for continuous sounders
Volt free contact input silences sounders
Volt free contact for any action required
Fused at 500mA
5 Amp self-resetting polyfuse
20mm 3 Amp
-5 to +50 deg. C
To 95% (non-condensing)
110 or 230V AC 50 or 60 Hz.
(specify when ordering, default is 230V)
12Ah 12V (2 per panel) (non-networked)
2 with variable device sensitivity
Individual for each device selectable up to 2 minutes
Individual 2-stage to 10 minutes per stage
Programmable to carry out any cause & efect,
disablement or test action
Red/yellow/green to indicate any action
Up to 64 panels on 2 wires (K555 Network Card required)
New front loading feature
S187 (standard) or X187LS (economy)
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Technical
Panels
Product Code
EN#6300203
EN#6316203
EN#6348203
EN#6396203
EN#6300403
EN#6316403
EN#6348403
EN#6396403
EN#6300415
EN#6316415
EN#6348415
EN#6396415
Zones
0
16
48
96
0
16
48
96
0
16
48
96
Size (mm)
500 x 355 x 117
500 x 355 x 117
500 x 355 x 117
500 x 355 x 117
500 x 355 x 117
500 x 355 x 117
500 x 355 x 117
500 x 355 x 117
500 x 460 x 190
500 x 460 x 190
500 x 460 x 190
500 x 460 x 190
# - replace with A for Apollo protocol,
V for Argus Vega protocol or H for Hochiki protocol.
Flush versions are available to order (See price guide).
For ftted printer add P after stock code.
Loops
2
2
2
2
4
4
4
4
4
4
4
4
Product Code
K552#
K555
K768SYN
K560
K547
K546
K545
K556P
B3472
Description
Loop extension card (loops 3 & 4)
Fault tolerant Network interface card
Thermal printer kit (for retroftting to non-printer models)
4 way conventional detection zone board
Modem module (PSTN)
Options
506mm
361mm
130mm
Bezel extends 15mm
in each direction
Model No. EN#6396414
2

L
o
o
p

P
a
n
e
l
s
4

L
o
o
p

P
a
n
e
l
s
DS16.14.2011
Flush Syncro Control Panel
Flush mount cross section
Control
Panel
Wall
Note: There is one size for all
standard fush Syncro control
panels. For the hole size we
recommend that you allow
5mm clearance all round.
4

L
o
o
p

P
a
n
e
l
s
L
a
r
g
e
r

E
n
c
l
o
s
u
r
e
Page 12
Analogue Addressable Fire
Control Panels 6 or 8 Loops
Features
Product Overview
Available with 6 or 8 detection circuits, each capable of hosting
devices (Hochiki). Syncro uses the most advanced
microprocessor technology to provide a control system of
extremely high integrity.
Syncro can be confgured to suit all types of system, from the
most simple, to the highly complex. Its fully integrated and
secure network provides comprehensive scalability.
Syncro supports three of the most widely used communication
protocols produced by leading fre detector manufacturers and
employs daily calibration routines to ensure that the system is
always at optimum performance.
Confg. Features
6 or 8 loop versions as standard
96 zone indicators
Fully supports Apollo, Argus Vega & Hochiki
protocols
Network up to 32 6 or 8 loop panels
8 programmable sounder circuits as standard
2 x 5.25 amp PSUs to EN54 part 4
In built help and alarm information screens
Real time clock
loop powered sounders and beacons
3 programmable front panel mounted LEDs
Improved Front loading Printer (optional)
Up to 1024 programmable
inputs/outputs per panel via 2 wire RS485
serial link (optional)
Simple Windows graphical confguration
utility
Wide choice of languages available
Model No. EN#63966S4P
Syncro
R
I
M
P
R
O
V
E
D
!
Specifcation
Construction
Finish
Colour - lid & box
Display
Detection circuits (Loops)
Zone LEDs
8 sounder circuits
2 x Fire contact
2 x Alarm contact
2 x Fault contact
2 x Programmable relay 1
2 x Programmable relay 2
2 x Fire routing output
2 x Fault routing output
2 x Extinguisher output
2 x Fault input
2 x Reset input
2 x Intermittent input
2 x Continuous input
2 x Silence input
2 x Programmable input 1
2 x Auxiliary 24V DC output
2 x System fuse
2 x Mains fuse
Operating humidity
Day/night modes
Input delays
Output delays
2 programmable
function buttons
Network
Printer (option)
Download lead
Epoxy powder coated
6 or 8 (400mA each)
96 (up to 500 software zones)
Each fused at 1 Amp
(total load 2 Amp per bank of 4 circuits)
Monitored-voltage reversing,
fused at 500mA
fused at 500mA
fused at 1A
Volt free contact input signals fault
Volt free contact input resets panel
Volt free contact input pulses sounder outputs
Volt free contact input for continuous sounders
Volt free contact input silences sounders
Fused at 500mA
20mm 3 Amp
-5 to +50 deg. C
110 or 230V AC 50 or 60 Hz. (specify when ordering, default is 230V)
12Ah 12V (4 per panel)
Individual for each device selectable up to 2 minutes
Programmable to carry out any cause & efect,
disablement or test action
Up to 32 6 or 8 loop panels on 2 wires
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Technical
Panels
Product Code
EN#63966S4
ENS#63966S4
EN#63968S4
ENS#63968S4
Zones
96
96
96
96
Size (mm)
500W x 650H x 137D
500W x 650H x 137D
500W x 650H x 137D
500W x 650H x 137D
For ftted printer add P after stock code.
Loops
6
6
8
8
Product
Code
K552#
K768SYN
K560
K547
K546
K545
K556P
B3472
Description
Loop extension card (loops 7 & 8)
Thermal printer kit (for retroftting
to non-printer models)
4 way conventional detection zone
board
Modem module (PSTN)
Thermal Paper Printer Roll
Options
DS57.03.2011
Enable
Control
No
Yes
No
Yes
Page 14
Fire Control Panel Repeaters
Features
Product Overview
Syncro Response is a full function repeater panel used to
compliment the Syncro control panel range. Syncro Response
uses the most advanced microprocessor technology to provide
a control system of extremely high integrity.
Syncro Response can be confgured to suit all types of system,
to provide selectable event reporting and controls from each
panel on the network.
Syncro networks support three of the most widely used
communication protocols used by leading fre detection
manufacturers.
Confg. Features
0, 16, 48, or 96 zone indicators
Network up to 64 panels/repeaters
5.25 amp power supply to EN54 part 4
In built help and alarm information
screens
Complies with EN54-2
Real time clock
3 programmable front panel mounted
LEDs
Improved Front loading Printer
(optional)
Up to 512 programmable inputs/outputs
per panel via 2 wire RS485 serial link
(optional)
Simple Windows graphical
confguration utility
Model No. #6196003
Response
Syncro
I
M
P
R
O
V
E
D
!
Specifcation
Construction
Finish
Colour - lid & box
Display
Zones
Alarm contact
Fault contact
Auxiliary 24V DC output
System fuse
Mains fuse
Operating humidity
Day/night modes
Input delays
Output delays
Printer (option)
Download lead
Epoxy powder coated
0, 16, 48, or 96
Fused at 500mA
20mm 3 Amp
-5 to +50 deg. C
12V 12Ah (2 per panel)
Individual for each input selectable up to 2 minutes
Programmable to carry out any cause & efect, disablement or test action
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Technical
Panels
Product Code
K6100003
K6116003
K6148003
K6196003
Zones
0
16
48
96
Size (mm)
500 x 355 x 117
500 x 355 x 117
500 x 355 x 117
500 x 355 x 117
Flush versions are available to order.
For ftted printer add P after stock code
Loops
0
0
0
0
Product Code
K768SYN

K560
K547
K546
K545
K556P
B3472
Description
Thermal printer kit
(for retroftting to non printer models)
4 way conventional detection zone board
Modem module (PSTN)
Options
Note: Syncro Response is supplied complete with K555 network interface card ftted.
Note: If this panel is to be ftted to an existing system the main panel must be also be ftted with and K555
network interface card to enable communications. 6 & 8 loop panels have a network card ftted as standard.
DS17.09.2011
Page 16
Network LCD Repeaters Features Product Overview
This simple and attractive repeater
panel can be connected to any point
on a Syncro network to provide
additional display points as needed.
Using the same large format
graphics display as the main control
panel ensures that a clear and concise
indication is given at all times.
Ideal for additional building
entrances, security desks or nurses
stations this unit provides an
economical alternative to a full
function repeater panel. (Syncro
Response) The repeater also acts as a
network booster and can be used to
extend cable runs beyond the
specifed lengths as required.
Simple connection to Syncro
network
24V DC powered
(230V AC available)
Small attractive enclosure
Confgurable to display all
or any events
Simple to install
Volt free Alarm, Fire and Fault
contacts
Up to 63 repeaters can be
connected to a panel
Focus+ with full controls has the
following extra buttons:
Silence Alarm
Resound Alarm
Reset
Focus+ Model No. K691000M1 Focus Model No. K69000M1
Foc us
Syncro
FOCUS+
PANEL 6
NETWORK
NETWORK
& CONTROL
MONITORING
REMOTE PC
SYSTEM
GRAPHICS
FOCUS
PANEL 5
REPEATER REPEATER
PANEL 8 PANEL 9
NETWORK
REPEATER
BOOSTER
PANEL 7
SIGNAL
2 LOOP
PANEL 2
NETWORK
4 LOOP
PANEL 3
NETWORK
4 LOOP
PANEL 4
NETWORK
0 LOOP
PANEL 1
NETWORK
ALLOWS DISTANCES
GREATER THAN
1.2 KILOMETRES
1.2 KILOMETRES MAX.
B A
Example of a Syncro high integrity network
Note:
Signal booster is a Focus or Focus+
repeater used as a booster.
Foc us+
Syncro
Specifcation
Construction
Finish
Colour - lid & box
Display
Input voltage (24V DC model)
Input voltage (230V AC model)
Current consumption
Alarm current
Alarm contact rating
Fire contact rating
Display
Cable entry
Indicators
Battery Size
(24 hr. standby on 230V AC model)
Communications
Cable length

Network cable type
Operating temperature
Epoxy powder coated
Ral 7047 light grey - satin
21V DC - 30V DC
230V AC +10%/-15%
80mA at 24V DC (in fault condition)
100mA at 24V DC
30V DC 1 Amp max.
30V DC 1 Amp max.
30V DC 1 Amp max.
240 x 64 pixel graphic LCD
20mm knockouts
5mm high brightness LED
2.3Ah 12V (2 per panel)

Syncro system network protocol only
1200 metres to adjacent nodes
(subject to cable type)
(see technical manual)
Belden 9271, Belden 9860, FP200 Gold
-5C to +40C
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Technical
Focus Units
Product Code
K68000M1
K69000M1
K68000F1
K69000F1
PSU
-
750mA
-
750mA
Weight
2.5kg
4.0kg
2.5kg
4.0kg
Size (mm)
330 x 255 x 90
330 x 255 x 90
330 x 255 x 90
330 x 255 x 90
Build
Surface
Surface
Semi Flush
Semi Flush
Focus+ Units
NOTE: An K555 network card is required in the Syncro/Syncro AS panel in order to communicate
with these products. 6 - 8 loop panels have a network card ftted as standard.
Product Code
K681000M1
K691000M1
K681000F1
K691000F1
PSU
-
750mA
-
750mA
Weight
3.5kg
4.0kg
3.5kg
4.0kg
Size (mm)
330 x 255 x 90
330 x 255 x 90
330 x 255 x 90
330 x 255 x 90
Build
Surface
Surface
Semi Flush
Semi Flush
PSU
FLT.
NC C NO C NC NC C NO NO NC C
NET. NET.
IN FAULT FIRE ALARM OUT 24V
24V
battery
backed
power
Syncro Focus/Focus+ PCB
From
previous
panel on
network
To normally
closed contact
on local PSU
To next
panel on
network
(2.3Ah for
24H standby)
DS24.10.2011
Page 18
Local LCD Control
Panel Repeater
Features
Product Overview
Designed and manufactured to the highest standards in a
quality controlled environment the Syncro VIEW fre alarm
annunciator provides a simple and convenient method of
extending the controls and indications of the Syncro fre alarm
control panel to other locations.
The large, graphic liquid crystal display and high brightness LED
indicators duplicate the indications on the Syncro fre alarm
control panel at up to 15 additional locations via a simple,
two-wire serial data connection.
The Syncro VIEW is available in either a 24V DC powered option
(which can be powered via an additional 2 cores from the Syncro
control panel/local 24V DC supply) or a 230V powered option
with local battery back up.
Syncro VIEW is housed in a small enclosure which is styled
similarly to the Syncro control panel and is ideal for installations
where a large control panel would be detrimental to dcor such
as entrance halls.
Up to 15 Syncro VIEW annunciators can be connected to each
control panel on the Syncro network making VIEW ideal where
multiple points of indication and/or control are required such as
nurses stations or shop units.
Up to 15 annunciators can be connected to
each Syncro, Syncro Response or
Syncro AS fre control panel.
Large liquid crystal display (240 x 64 pixels)
High brightness LED indications
Internal sounder
Replicates all Syncro panel controls
Simple, two-wire serial connection
Small, Syncro style enclosure
Removable electronics for easy installation
24V DC or 230V AC power options
Low power consumption
Multi language options
Connection monitored by Syncro fre
control panel
Model No. K67750M1
Vi ew
Syncro
Specifcation
Construction
Finish
Colour - lid & box
Display
Cable entry
Mains supply (Mains models only)
24V supply (24V DC models only)
Mains supply fuse
Power supply rating
Maximum ripple current
Battery type (Yuasa NP)
Battery charge voltage
Battery charge current
Battery fuse
Maximum current draw from batteries
Quiescent current of panel in mains fail
Serial data connection
Maximum terminal capacity
Epoxy powder coated
Ral 7047 light grey - satin
5 x 20mm knockouts in top of box and 5 in rear
230V AC +10% - 15% (20 Watts maximum)
21 to 30V DC
2 Amp, 20mm
28V 750mA total (including battery charging)
200 millivolts
Two 12 Volt 1.9Ah sealed lead acid in series
27.6VDC nominal
200mA maximum
200mA, 20mm, glass
95mA
0.03 Amps
2 core RS485 (Up to 1200 metres total cable length)
2.5mm
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Technical
Equipment
Product Code
K67000M1
K67750M1
K67001M1
K67751M1
PSU
-
750mA
-
750mA
Size (mm)
330 x 255 x 90
330 x 255 x 90
330 x 255 x 90
330 x 255 x 90
Description
Syncro View repeater panel
Syncro View repeater panel
Syncro View repeater panel c/w enable keyswitch
Syncro View repeater panel c/w enable keyswitch
Syncro Control Panel Syncro View #1
Comms
In
Comms
Out
24V In 24V Out
Syncro View #15
Comms
In
Comms
Out
24V In 24V Out
Comms
Aux 24V
DS43.04.2011
Semi-fush versions are available to order
Page 20
Programmable,
LED Indication Panels
Features
Product Overview
Syncro Ident panels provide a compact and attractive display
for up to 24 indications from a Syncro or Syncro AS fre control
panel.
As with all inputs and outputs on the Syncro system, each
indicator is fully programmable to indicate a variety of events
as well as being fully programmable via cause and efects to
operate in response to logically connected inputs. Each
indication defaults to a zonal fre indicator but may be
confgured via the Loop Explorer confguration utility to
operate upon any event type or combination of inputs.
Requiring only a low current 24V power supply and a 2 core
data connection to the fre panel, Syncro Ident panels can be
installed quickly and easily to provide supplementary
information on the status of the fre alarm system with the
minimum of cost and efort.
The compact, slimline enclosure is unobtrusive and is ideal for
mounting in locations where a larger control and indication
unit would be unsuitable.
Each indication has a dedicated feld for customized text to
provide a concise description of the indication.
Multiple Syncro Ident panels can be connected to the Syncro
serial bus to provide a diverse range of indications at multiple
locations.
8 and 24 LED versions available as
standard
Large versions available to special order
Up to 16 x 24 way Syncro Ident can be
connected to each fre panel
Programmable fashing or steady states
Red, yellow or green indications/ options
Common Fire, Fault and Disabled
indication
Customisable label identifcation tags
Buzzer with silence control and re-sound
Lamp test control
Low power 24V DC supply
Connects to 2 wire Syncro RS485
data bus
Multiple language options
Model No. K6524L2
I dent
Syncro
Specifcation
Construction
Finish
Colour - lid & box
Colour - controls
plate & labels
LED colours
Supply Voltage
Data Connection
Epoxy powder coated

Red, yellow or green
18 to 30V DC
RS485 Syncro comms bus (Max 1200 metres)
-
-
-
-

-
-
-
Technical
Panels
Product Code
K6508L2
K6524L2
No. of LEDs
8
24
Size (mm)
385 x 310 x 60
385 x 310 x 60
DS60.02.2011
15:05 Tuesday 10 October 2006
KENTEC ELECTRONICS LIMITED 4
3
2
1
?
More
Events Fires
More
Exit Enter
Enable Control Function Evacuate Reset
Buzzer
Silence
(Acknowledge)
Silence Alarm Re-Sound
Sounder
Fault/Disabled
SystemFault
Power Fault
General Fault
General
Disablement
More Events
Delay Active
Buzzer Silenced
On Test
Pre-Alarm
Power On
Test
Lamp
Alarm
Fire in Zone
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
Fire
Model:
Fire Detection
Indicator
Fire
Power On
Fault
Disablement
Buzzer Silence LampTest
RS485
2 Core
Data Cable
2 Core
Power Cable
Zonal Fire Indicators Plant Status
Disabled Refuge Alarms Syncro View
Syncro AS Fire
Control Panel
Model:
Fire Protection
Indicator
Model:
Fire Detection
Indicator
Fire
Power On
Fault
Disablement
Syncro Matrix Syncro I/O
Model:
Fire Detection
Indicator
Fire
Power On
Fault
Disablement
Examples of Syncro Ident panel used to provide supplementary indications from the re control panel
COMMS OUT
OUT
I/O
I/O CHANNEL
0V
LT
0V
0V
24V
0V
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
COMMS IN
IN
0V
24V
0V
Fire Alarm
Mimic Display
Fire
Power On
Fault
Disablement
Buzzer
Silence
Lamp
Test
Alarm
Silence
Enable
Control
Reset
Fire Alarm
Repeater
4
3
2
1
?
15:05 Tuesday 22 August 2006
KENTEC ELECTRONICS LIMITED
Fire
Silence Alarm
Disablement
General
(Acknowledge)
Re-Sound
Fault/Disabled
Fault/Disabled
Fire Routing
SystemFault
Sounder
Power Fault
General Fault
More Events
Delay Active
Buzzer Silenced
On Test
Fire Routing On
Pre-Alarm
Power On
Buzzer
Silence
Test
Lamp Reset
Alarm Two
Function
One
Function
Events
More More
Fires
Exit Enter
Other RS485 compatible devices
Versions with more LED indications available to special order
Page 22
Intelligent Fire Alarm
Mimic Display System
Features
Product Overview
The Syncro Matrix system uses fexible, fbre optic light guides to
illuminate areas on a foor plan, laid over a high resolution grid.
This unique system dispenses completely with wiring and
enables indicators to be moved, removed or added on site
without the need for any wiring.
All indicators can be confgured to operate upon any event type
and at point, zone or group level via Kentecs powerful and
intuitive Loop Explorer confguration programme. Syncro Matrix
can be supplied with or without LEDs and controls. Optional
LEDs indicate Power on, Fire, Fault and Disablement and
optional controls are for Alarm silence, Buzzer silence, Lamp test
and Reset.
Housed in attractive, slimline enclosures to match Syncro and
Syncro AS fre alarm panels and with high quality, full colour
or monochrome foor plans, Syncro Matrix provides a clear,
geographical indication of fre alarm activation enabling speedy
identifcation of the source of an alarm.
Up to 504 LEDs can be controlled
from any Syncro or Syncro AS panel
Full colour printing
Available in a range of standard
enclosures to suit any applications
Bespoke sized units can be made
upon request
Choice of Red, Green or Yellow LEDs
Available with or without controls
Same look and feel as Syncro range
Syncro Matrix can easily be upgraded
on site with minimal cost and efort
EN54-4 approved PSU (optional)
Confgured via standard Loop
Explorer Software
M3 size Syncro Matrix
Mat r i x
Syncro
View showing mimic mounted
on inner door
View showing LED grid
View showing internal layout
PSU opt ional
Specifcation
Construction
Finish
Colour - lid & box
Mimic
Number of indicators (standard models)
Mains supply (230V Versions only)
Mains supply fuse (230 V Versions only)
Power supply rating (230 V Versions only)
Max. ripple current (230 V Versions only)
(230 V Versions only)
Max. current draw from batteries
Quiescent current
Supply voltage (24V versions)
Supply current
Terminal capacity
Enable keyswitch (if ftted)
Cabinet locks
Communications interface
Maximum distance from control panel
IP rating
1.2mm mild steel
Epoxy powder coated
3mm Clear Anti-Glare Acrylic
M2 size - up to 24, M3 and S3 size - up to 56, S4 size - up to 88
230V AC +10% - 15% (100 Watts max.)
T2A L250V Replace only with similar type
5.25 Amps total including battery charge 28V +/ 2V
200 millivolts
Two 12 Volt sealed lead acid (7Ah maximum)
27.6VDC nominal (temperature compensated)
1.5A maximum
3 Amps. With mains power source disconnected
See above
21 to 30V DC
See above
0.5mm2 to 2.5mm2 solid or stranded wire
Standard 901 key
M2/M3 - standard 801 key, S3/S4 - standard KT3001 key
RS485 Syncro/Syncro AS serial I/O bus protocol
1.2Km using RS485 data cable
IP30
-5C to +50C
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Technical
Panels
No.
LEDs
24
56
88
Full Alarm
Current
0.09
0.18
0.36
Batteries for
24 hours
0.88Ah
1.75Ah
2.8Ah
Standby
Current
0.026
0.052
0.078
Batteries for
48 hours
1.76Ah
3.5Ah
5.2Ah
Max. number of
LEDs = 56
Will house 1 x 8 Red LED
driver PCB and
3 x 16 LED
extension PCBs
(Red, Green or Yellow)
Enclosure Size Options
Max. number of
LEDs = 56
driver PCB and
3 x 16 LED
extension PCBs
Max. number of
LEDs = 88
driver PCB and
5 x 16 LED
extension PCBs
Max. number of
LEDs = 504
Will house 1 x 8 LED
driver PCB (Red) and up to
31 x 16 LED
extension PCBs
Max. number of
LEDs = 24
driver PCB and
1 x 16 LED
extension PCBs
DS52.03.2011
385mm x 310mm
90mm Deep
500mm x 355mm
117mm Deep
385mm x 520mm
110mm Deep
500mm x 650mm
137mm Deep
Colour/Finish & Size
to suit your requirements
M2
S3
M3
S4
Bespoke Size
303
400
225
400
303
515
400
?
?
185
Page 24
Syncro
Networking
Features
Product Overview
The fexibility of the Syncro system can be further enhanced by
connecting control panels and repeaters together using a high
integrity network.
A simple 2-wire connection between each panel allows events
to be transmitted to other parts of the system to provide
indication or control on a system wide basis.
Using the Loop Explorer confguration programme, up to 64
nodes can be programmed to respond in a variety of ways to
any system events as required.
This fexibility extends the comprehensive cause and efect
programming capability of Syncro control panels to the entire
network allowing actions, test modes or disablements to be
started from any point.
The fault tolerance of the network is such that any single open
or short circuit fault will not result in any loss of information.
Multiple faults are isolated and the network breaks into smaller
networks which continue to work autonomously.
Up to 64 nodes
High integrity protocol
Fully secure against short or open circuit
faults
Simple 2-wire loop connection
Supports open ended networks for
retroft applications
Repeaters share network connection
Network wide test and disablement
functions
Network wide cause and efect logic
Flexible confguration options
Panels confgurable to act on network
events or not as required
Apollo & Hochiki panels supported on
single network
Part No. K555
Net
Syncro
Specifcation
Product code
Protocol
Connection
Current Consumption
Integrity
Indicators
Cable length

Cable type
Compatible panels
K555
RS485
Two wire loop
40mA
Full isolation of faulty nodes or wiring segments
Data In and Data Out communications status
1200 metres to adjacent nodes
(subject to cable type) (see technical manual)
Belden 9271, Belden 9860, FP200 Gold
Syncro/Syncro AS (required for networking)
Syncro Response/Syncro 6 & 8 loop, Syncro Focus (supplied with panel)
-
-
-
-
-
-
-
-
-
Technical
Flexible network confguration options using simple to follow PC
confguration programme
Two core loop wiring ensures network integrity by
providing full isolation of faulty wiring segments.
Control Panel
2 Core
2 Core
(Not tted
on open
ended
networks)
2 Core
Control Panel
Control Panel
DS23.07.2009
Page 26
Communications
Module (modem)
Features
Product Overview
The K556 communications module enables service companies
to interrogate control panels remotely via a telephone link.
The communications module is simple to install and requires a
PSTN telephone line.
The module mounts on existing pillars in the control panel and
is supplied with all wiring and connections to enable speedy
installation and commissioning.
Once connected to the control panel via the Loop Explorer
software, users can upload confguration data and event logs
or take control of the system via the virtual panel interface.
This allows the panel controls to be operated as if the user was
standing at the panel.
The Loop Explorer confguration programme (version 3.0 or
higher) is used to dial into control panels but the dial up facility
will not be available unless the PC calling the control panel is
ftted with a registered dongle (part number B2158 for parallel
port or B2158USB for USB version).
View devices near calibration limits
Plan maintenance visits
Retrieve event log
Dial in and observe reported faults
Assist commissioning from remote
location
Ofer value added service to customers
Check software version to see if updates
are available
Retrieve confguration
Avoid unnecessary call outs
Simple to install
Dongle protected access, for customers
security
Comms
Syncro
Specifcation
Module part number
Size
Supply voltage
Current consumption
Connection
Dongle part number
K556P (PSTN)
190mm(H) x 62mm(W) x 40mm(D)
21V to 30V DC
50 milliamps
PSTN
B2158 (parallel port)
B2158USB (USB serial port)
-
-
-
-
-
-
Technical
Note: The Communications Module is compatible with Loop Explorer Software version 3 or above
and Syncro Control Panel Firmware version 3 or above.
PC running Loop Explorer
Programme & tted with Dongle
Public Telephone
Network
Syncro Control Panel
tted with Communications Module
DS31.07.2011
Note: One dongle required per user, to enable the
dial in facility within the Loop Explorer program
Page 28
Graphical User Interface
for fre Detection Equipment
Features
Product Overview
Syncro fre control panels can send data to, and be controlled
by, the Guide system providing a single point of co-ordination
for all alarms.
The powerful 32 bit programme features a standard Windows
look and feel and runs under Windows 2000 , XP, Vista or
Windows 7 Professional.
The system is highly confgurable in terms of the style of
presentation so that the end user can be presented with maps,
text, photographs, audio or a combination of all as required.
User profles allow the system manager to control the facilities
available to each individual system user.
A comprehensive history logging and reporting system
allows analysis of events and trends to be identifed to reduce
unwanted alarms.
Easy to programme and simple to use, Guide provides a cost
efective solution for fre alarm management at many levels.
Choice of text, graphic, event list
display when an event occurs
Versatile event analysis
Total history archive
Easy to programme
Secure system
Cost efective compared to
other systems
Simple to use
Unlimited map linking & zoom
facility
Support for 100s of graphics
Display and control for multiple
panels
Event history explore and export
facility to text or HTML
documents
Powerful Event log fltering
Virtual Panel - allows direct control
GUI DE
Syncro
Specifcation
Processor
Operating system
Memory
Hard disk
Graphics

Sound card
Loudspeaker
Monitor

Pointing device

Printer
Parallel port
Serial ports

CDROM drive

Backup drive
Notes
The faster the better
Will operate under Windows 2000
The larger the better.
The driver must allow this mode with
large fonts. Separate Graphics card with
256MB graphics memory recommended

More convenient if built into PC.
17 inch minimum recommended,
the larger the better. (1024 x 768)
Third button and wheels are supported.
Touch screen option supported
Any type.
Required if parallel printer to be used.
Isolated converter supplied for
connection to fre alarm system.
Required for installation of software
and updates.
To back up history.
Recommended Minimum
Intel Pentium 1Ghz
Windows XP/Vista , 7
Professional
1Gb minimum
10GB minimum
1024 x 768 16M colours

Any PC sound card
Any PC speakers
Any that supports above
graphics driver
Mouse essential

Optional
Optional
One RS232 per network
Any

CD Writer
Technical
Range
Product Code
G1001
G1004
G1008
G1016
G1032
G1064
Description
GUIDE software - Single panel package
GUIDE software - 4 panel package
Note: Guide will be operating 24 hours a day for many years.
It may be desirable to include on site PC maintenance as part of the package.
Note: The Syncro panel to which the Guide system is connected must not have a printer ftted.
Note: Guide For use with Syncro Panels. Syncro 6 & 8 loop
panels are considered 2 panels in the packages above.
DS18.10.2009
Guide System
Fire Control
Panel
Fire Control
Panel
Dongle tted
RS485
Fire Control
Panel
Page 30
Providing Repeater Facility
for any GUIDE System
Features
Product Overview
Syncro GUIDE Repeater is an additional facility for the Syncro
GUIDE fre alarm management system.
GUIDE Repeater allows monitoring and limited control of the
Syncro fre control system to be repeated on dedicated
computers connected to the building Local Area Network.
GUIDE Repeater is highly confgurable allowing replication of
the main GUIDE system or alternative information to be given
at the repeater
Up to 16 GUIDE Repeaters may be connected to a single
GUIDE system
All monitoring options on GUIDE are supported on the GUIDE
repeater. Device an zone disablements may also be performed
from the Guide repeater.
Choice of text, graphics, combined display when an event
occurs.
Easy to use
Allows graphical information of fre events to be shown at
alternative locations
Unlimited map linking and zoom facility
Display and control for up to 64-networked Syncro panels
Repeat er
Syncro
Guide Repeater user interface
GUI DE
Specifcation
DS45.02.2009
Range
Product Code
GR2001
GR2004
GR2016
Description
GUIDE Repeater - single repeater package
GUIDE Repeater - 4 repeater package
GUIDE Repeater - 16 repeater package
Processor
Operating system
Memory
Hard disk
Graphics

Sound card
Loudspeaker
Monitor

Pointing device

Printer
Parallel port
Network
CDROM drive

Backup drive
Notes
The faster the better
Will operate under Windows 2000
The larger the better.
The driver must allow this mode with
large fonts. Separate Graphics card with
256MB graphics memory recommended

More convenient if built into PC.
17 inch minimum recommended,
the larger the better. (1024 x 768)
Third button and wheels are supported.
Touch screen option supported
Any type.
Required if parallel printer to be used.

Required for installation of software
and updates.
To back up history.
Recommended Minimum
Intel Pentium 1Ghz
Windows XP/Vista / 7
Professional
256MB minimum
10GB minimum
1024 x 768 16M colours

Any PC sound card
Any PC speakers
Any that supports above
graphics driver
Mouse essential

Optional
Optional
One network port
Any

CD Writer
Technical
Guide System
Dongle tted
RS485
Fire Control
Panel
LAN
Page 32
Multi Input/Output Unit
Product Overview - MIOU
Occupying less than 20% of the space required by conventional
I/O units, the MIOU replaces the large and expensive enclosures
normally required for this application.
With 8 opto-isolated inputs and 8 volt-free relay contacts (relay
outputs individually selectable as normally open, normally
closed or switched voltage outputs), the MIOU will fnd a
multitude of uses in concentrated I/O applications.
MI OU
LIOU - Model No. K507 MIOU - Din rail mounting version (K559)
LI OU( Lit e Version)
Features - MIOU
Multiple inputs and outputs at one
address
Opto isolated inputs
Volt free contact or switched voltage
outputs
Considerable space and cost saving over
discreet I/O units
Easy clip-on din rail mounting method
Compatible with Solo, Syncro AS and
Syncro control equipment
Low standby supply current
Hochiki ESP protocol
Product Overview - LIOU
LIOU Lite provides 4 inputs and 4 outputs to a Hochiki analogue
addressable detection loop in a compact and cost efective
package.
The LIOU Lite can replace up to four addressable modules in
approximately the same space taken by one standard module
and is ideal for applications where a concentration of I/O is
needed in a limited space.
The modules can be addressed with the Hochiki, hand held
programmer in the range 1 to 127.
All inputs and outputs are fully confgurable for any action and
for cause and efect via the Syncro Loop Explorer confguration
utility.
The LIOU connects to the ESP loop as per all other ESP devices.
Consider the maximum number of sub-addresses when using
LIOU.
Each unit has an integral short circuit isolator which provides
further cost and space saving.
Features - LIOU
Four optically isolated inputs
Four volt free changeover relay contact
outputs
24V DC powered
Small footprint
Cost efective for concentrated
I/O applications
Built in short circuit isolator
Compatible with Syncro and Syncro AS
addressable fre control panels
Hochiki ESP protocol
Note:
MIOU & LIOU are currently compatible with Solo, Syncro and
Syncro AS control panels only.
Note:
MIOU & LIOU support Hochiki ESP protocol only.
Note:
Inputs on MIOU & LIOU are not monitored.
Specifcation
Boxed unit battery capacity
Finish - lid & box
Colour - lid & box
Boxed unit IP rating
Module mounting
Communication protocol
Supply voltage H6600001
Supply voltage H6675001
Quiescent supply current
Input operated current
Output operated current
Input trigger resistance
Output contact rating
Switched -ve output
Minimum recommended PSU
Device sub-address count
Address setting
2.6Ah 12V (2 per unit)
Epoxy powder coated
BS 00-A-05 grey - fne texture
IP30
Symmetrical or asymmetrical din rail
Hochiki ESP
24V DC
10 milliamps
3 milliamps
18 milliamps
1k maximum
30V DC 1 Amp maximum
65 milliamps maximum per output
750 milliamps at 24V DC
-5 to +40 deg. C
17 (of 800 permitted in Syncro / Syncro AS panel)
Hochiki hand held programmer (see TB1010)
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Technical - MIOU
Range
Weight
0.3kg
3.6kg
6.8kg
0.2kg
3.6kg
6.8kg
PSU
-
-
750mA
-
-
750mA
Product Code
K559 (Module Only)
H66000M2
H66750M2
K507 (Module Only)
HL66000M2
HL66750M2
Size (mm)
203(L) x 77(W) x 45(D)
385(L) x 310(H) x 90(D)
385(L) x 310(H) x 90(D)
119(L) x 99(W)
385(L) x 310(H) x 90(D)
385(L) x 310(H) x 90(D)
DS21.09.2011
Module
MIOU
MIOU
MIOU
LIOU
LIOU
LIOU
Boxed unit battery capacity
Finish - lid & box
Colour - lid & box
Module mounting
Communication protocol
Supply voltage
(K507 & HL6600M2)
Supply voltage (HL66750M2)
Mains fuse for HL67750M2
Quiescent supply current
Input operated current
Output operated current
Input trigger resistance
minimum recommended PSU
Device sub-address count
2.6Ah 12V (2 per unit)
Epoxy powder coated,
4 x 4mm holes in PCB
Hochiki ESP
21 to 30V DC
230V AC
20mm ceramic 2A/250V fast
acting
10 milliamps
3 milliamps
18 milliamps
1K maximum
30V DC/2A - 230V AC/0.5A
750 milliamps at 24V DC
-5 to +40 deg. C
17 (of 800 permitted in Syncro /
Syncro AS panel)
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Technical - LIOU
FIRE
PRESS HERE
BREAK GLASS
LIOU/
MIOU
24V DC
CHQ-DIM CHQ-DRC
Control Panel
Page 34
16 Channel
Input/Output Board
Features
Product Overview
To add more I/O capability to the extensive options already
ofered by the Syncro control panel, up to thirty two, sixteen
channel I/O boards may be connected.
The 16 channel boards may be mixed on the RS485 bus with 8
way sounder boards, 6 way sounder boards or 4 way
conventional detection zone boards to provide a very fexible
system of I/O to satisfy any requirement.
When using a simple two wire RS485 communications protocol,
these boards may be mounted locally to the control panel or
distributed on a bus up to 1200 metres long by using a suitable
cable.
The fexibility of these boards is further enhanced by the fact
that each of the channels is confgurable as either an input or
and output.
Each channel may also be confgured to produce a variety of
input actions or respond to a variety of output types.
All channels can contribute to, or respond to, system wide cause
and efects logic.
Typical uses for I/O boards include geographical LED mimic
displays and plant alarm inputs.
Standard Syncro control panels contain fxings for one sounder,
relay, conventional detection or I/O board, which can easily be
connected using four small signal wires to the power and comms
bus within the panel.
Consideration must be taken as to the loading on the main
panel.
16 channels

Each channel confgurable as input or
output

Inputs opto-isolated

Outputs open collector transistor
Simple 2 wire connection to control panel

Up to 32 boards supported per panel
(512 Input/Output Channels)

Inputs and outputs confgurable as per
feld devices

Full cause and efects on all inputs and
outputs
Multi drop RS485 communications
Can be used with other Syncro I/O
modules on the same panel
Compatible with Syncro AS panels
Part No. K560
i O
Syncro
Specifcation
Product code
Supply voltage
Quiescent current
consumption
Current per input
Current per output
Communications
Maximum distance
from panel
PCB size
Cable capacity
Operating humidity
K560
21 - 30V DC
20mA
3mA (maximum)
100mA (maximum)
RS485 two wire
1.2Km (using correct type of cable)
190mm x 61mm
2.5mm per terminal
-10C to +50C
To 95% (non condensing)
-
-
-
-
-
-
-
-
-
-
-
Technical
For full technical and application details see the Syncro I/O Board manual
DS22.06.2009
B
A
T
T
.

D
I
S
C
O
N
N
.
C
H
A
R
G
E
R

F
A
U
L
T
E
A
R
T
H

F
A
U
L
T
M
A
I
N
S

F
A
I
L
B
A
T
T
.
L
O
W
To Next
I/O Board
COMMS
OUT
CHANNEL
I/O
I/O
OUT
0V
24V
0V
0V
0V
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
COMMS IN
IN
0V
TX
RX
24V
0V
REMOTE PSU
OUT
IN
NETWORK
NETWORK
SNDR.2 SNDR.3 SNDR.4 SNDR.1
24V DC
8.
7.
6.
5.
4.
3.
2.
1.
I/O BOARDS
ADDITIONAL
24V
AUX
COMMS
INPUTS
AND AUX.
CONTROL
REMOTE
PR3
PR2
PR1
0V
SIL
CNT
INT
RES
FLT
OUTPUT
EXTINGUISHER
FAULT
ROUTING
ROUTING
FIRE
Syncro 16 Channel
I/O Board
0V
24V
2K2
EXAMPLE
OUTPUT
INPUT
EXAMPLE
24V Out to
next board
only if
powered
from
Power
Supply &
not
Aux.24V at
panel
Syncro
Main PCB
Page 36
8 Way Relay
Extender Board
Features
Product Overview
To further enhance the versatility of the Syncro fre alarm
system, additional relay output capability can be added using
Syncro relay boards.
These boards have 8 voltage free changeover relay contacts,
each of which can be individually programmed.
Up to 32 of these boards can be connected to the dedicated
RS485 communications bus in the control panel giving the
capability of up to 256 additional relay outputs.
The relay boards may be mixed on the RS485 bus with 16
channel I/O boards, 6 way sounder boards or 4 way
conventional detection zone boards to provide a very fexible
system of I/O to satisfy any requirement.
All outputs are confgurable in the same way as devices
connected to the loops and all may be acted upon by cause and
efect logic.
These boards are typically used in applications which require
more than the four standard relay outputs such as signalling to
other systems or plant control.
relay, conventional detection or I/O board, which can easily be
connected using four small signal wires to the power and
comms bus within the panel.
panel.
8 volt free changeover relay contacts
(1Amp 30V DC)

Relay operated indications

Remote connection to panel via RS485
serial bus

Common footprint to other Syncro I/O
board types
All outputs programmable for cause and
efects
i O
Syncro
Part No. K547
Specifcation
Product code
Supply voltage range
Quiescent current
consumption
Operating current
(all outputs on)
Communications
Max. distance from panel
PCB size
Fixing centres
Cable capacity
Operating humidity
K547
21 to 30 volts DC
10mA
250mA
30V DC 1 Amp
RS485 two wire
1.2Km (using RS485 data cable)
190mm x 61mm
51.5mm x 180mm
2.5mm per terminal
-5C to +50C
-
-
-
-
-
-
-
-
-
-
-
-
Technical
O/P 8
O/P 7
O/P 6
O/P 5
O/P 4
O/P 3
O/P 2
O/P 1
NO
C
NC
NO
C
NC
NO
C
NC
NO
C
NC
NO
C
NC
NO
C
NC
NO
C
NC
NO
C
NC
COMMS
OUT
OUT
0V
24V
0V
B
A
T
T
.

D
I
S
C
O
N
N
.
C
H
A
R
G
E
R

F
A
U
L
T
E
A
R
T
H

F
A
U
L
T
M
A
I
N
S

F
A
I
L
B
A
T
T
.
L
O
W
Data Out to
other Boards
Signal to
other Systems
30V DC Max.
1 Amp Max.
C
O
M
M
S

I
N
IN
0V
TX
RX
24V
0V
REMOTE PSU
OUT
IN
NETWORK
NETWORK
24V DC
8.
7.
6.
5.
4.
3.
2.
1.
I/O BOARDS
ADDITIONAL
24V
AUX
COMMS
INPUTS
AND AUX.
CONTROL
REMOTE
PR3
PR2
PR1
0V
SIL
CNT
INT
RES
FLT
OUTPUT
EXTINGUISHER
FAULT
ROUTING
ROUTING
FIRE
Syncro 8 Way
Relay Board
Syncro
Main PCB
24V Out to next
board only if
powered from
Power Supply & not
Aux.24V at panel
DS33.05.2009
Page 38
6 way Sounder
Extender Board
Features
Product Overview
system, additional sounder output capability can be added
using Syncro sounder boards.
These boards have 6 monitored sounder outputs, each of
which can be individually programmed.
In addition to the sounder outputs each board has two general
purpose, opto-isolated inputs and two volt-free changeover
contact outputs.
capability of 192 additional sounder outputs with 64 general
purpose inputs and 64 general purpose outputs.
The sounder boards may be mixed on the RS485 bus with 16
channel I/O boards, 8 way relay boards or 4 way conventional
detection zone boards to provide a very fexible system of I/O
to satisfy any requirement.
All inputs and outputs are confgurable in the same way as
devices connected to the loops and all may contribute to, or be
acted upon by cause and efect logic.
These boards are typically used in applications that require
more than the four standard sounder outputs such as
replacement of existing conventional systems.
relay, conventional detection or I/O board, which can easily
be connected using four small signal wires to the power and
comms bus within the panel.
panel.
6 individually fused and monitored
sounder outputs

Fault and operated indications

2 opto-isolated general purpose inputs
2 volt free contact general purpose
outputs
Remote connection to panel via RS485
serial bus
Common footprint to other Syncro I/O
board types
All outputs and inputs programmable for
cause and efects
i O
Syncro
Part No. K546
Specifcation
Product code
Quiescent current
consumption
Full alarm current
consumption
Sounder current
monitoring resistor
Current per input
Current per sounder output
Communications
PCB size
Fixing centres
Cable capacity
Operating humidity
K546
21 to 30 volts DC
30mA
260mA
10k
3mA maximum
1 Amp maximum
30V DC 1 Amp
RS485 two wire
190mm x 74mm
51.5mm x 180mm
2.5mm per terminal
-5C to +50C
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Technical
DS34.05.2009
O/P 2
O/P 1
S1
NO
C
NC
NO
C
NC
S2
S3
S4
COMMS
OUT
OUT
0V
24V
0V
S5
S6
I/P1
I/P2
B
A
T
T
.

D
I
S
C
O
N
N
.
C
H
A
R
G
E
R

F
A
U
L
T
E
A
R
T
H

F
A
U
L
T
M
A
I
N
S

F
A
I
L
B
A
T
T
.
L
O
W
Data Out to
other Boards
C
O
M
M
S

I
N
IN
0V
TX
RX
24V
0V
REMOTE PSU
OUT
IN
NETWORK
NETWORK
24V DC
8.
7.
6.
5.
4.
3.
2.
1.
I/O BOARDS
ADDITIONAL
24V
AUX
COMMS
INPUTS
AND AUX.
CONTROL
REMOTE
PR3
PR2
PR1
0V
SIL
CNT
INT
RES
FLT
OUTPUT
EXTINGUISHER
FAULT
ROUTING
ROUTING
FIRE
Syncro
Sounder
Board
Syncro
Main PCB
24V Out to next board
only if powered from
Power Supply & not
Aux.24V at panel
Signal to other systems
max. voltage 30V DC
max. current 1 Amp
Max. contact resistance
500 Ohms
Unused outputs must
be terminated with end
of line resistor to
prevent fault indication
1
0
K
Polarised sounders max.
1 Amp. End of line
resistor tted
1
0
K
Page 40
4 Way Conventional
Detection Zone Module
Features
Product Overview
system, four conventional detection circuits can be connected
with up to 30 detectors per circuit.
Conventional control panels can be replaced with this simple
module and existing conventional systems can be interfaced
directly to modern analogue addressable control systems and
networks.
A fail safe mode ensures that the detection inputs will still
operate the sounder outputs and fre contact if
communication to the Syncro panel is lost.
capability of up to 128 conventional zones with 64 sounder
outputs.
The detection zone boards may be mixed on the RS485 bus
with 16 channel I/O Boards, 6 way sounder boards or 8 way
relay boards to provide a very fexible system of I/O to satisfy
any requirement.
All inputs and outputs are confgurable in the same way as
devices connected to the loops and all may be acted upon by
cause and efect logic.
Standard Syncro control panels contain fxings for one (four
way) Detection Zone board, Sounder board, Relay board or I/O
board, all of which can easily be connected using four signal
wires to the power and comms bus within the panel.
panel.
4 monitored detection zone inputs

2 monitored sounder outputs

Volt free fre contact
Volt free fault contact
Local power supply fault input
RS485 comms connection to Syncro Fire
Alarm Panel
Individual fault and operated indications
for inputs and outputs
Directly replaces a conventional control
panel when integrating into an analogue
addressable system
i O
Syncro
Part No. K545
Specifcation
Product code
Quiescent current
consumption
Operating current
(all outputs on)
Detection zone
monitoring resistor
Sounder circuit
monitoring resistor
Communications
PCB size
Fixing centres
Cable capacity
Operating humidity
K545
21 to 30 volts DC
70mA
250mA
30V DC 1 Amp
6k8
10k
RS485 two wire
190mm x 74mm
51.5mm x 180mm
2.5mm per terminal
-5C to +50C
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Technical
DS35.05.2009
F
A
U
L
T
S2
0V
PF
NO
C
NC
S1
COMMS
OUT
OUT
0V
24V
0V
B
A
T
T
.

D
I
S
C
O
N
N
.
C
H
A
R
G
E
R

F
A
U
L
T
E
A
R
T
H

F
A
U
L
T
M
A
I
N
S

F
A
I
L
B
A
T
T
.
L
O
W
Data Out to
other Boards
C
O
M
M
S

I
N
IN
0V
TX
RX
24V
0V
REMOTE PSU
OUT
IN
NETWORK
NETWORK
24V DC
8.
7.
6.
5.
4.
3.
2.
1.
I/O BOARDS
ADDITIONAL
24V
AUX
COMMS
INPUTS
AND AUX.
CONTROL
REMOTE
PR3
PR2
PR1
0V
SIL
CNT
INT
RES
FLT
OUTPUT
EXTINGUISHER
FAULT
ROUTING
ROUTING
FIRE
Syncro 4 Way
Conventional
Detection
Zone Board
Syncro
Main PCB
24V Out to next
board only if
powered from
Power Supply & not
Aux.24V at panel
D D D CP
F
I
R
E
NO
C
NC
Z4
Z3
Z2
Z1
E
O
L
D D CP
E
O
L
D D D CP
E
O
L
D D CP
CP
CP
E
O
L
S S S S
E
O
L
S S
Page 42
I/O Board Enclosure
Features
Product Overview
A range of new enclosures designed to house Syncro I/O
modules with or with a power supply. The Syncro I/O enclosure
ofers the installer the fexibility to create their own customised
I/O panel. The standard Syncro I/O enclosure can hold up to 3
Syncro I/O modules or 2, if a power supply is incorporated.
Matching design & colour scheme for
Kentec new style control panel range
Easy to install
Incorporates Kentecs Quick Fit lid &
equipment chassis
Front panel mounted status led indication
Space for 3.2Ah batteries
Choice of power supplies
Model No. K16001M2
Equipment
Product Code
K16001M2
K16750M2
K16250M2
K16400M2
Plug-Ins
K560
K547
K546
K545
Description
Syncro I/O enclosure without Charger
Syncro I/O enclosure c/w 750mA Charger
Syncro I/O enclosure c/w 2.5A Charger
Syncro I/O enclosure c/w 5.25A Charger
16 Channel Input/Output Board
8 Way Relay Extender Board
6 Way Sounder Extender Board
4 Way Conventional Detection Zone Module
3x I/O boards without PSU
2x I/O boards with PSU
16 Channel
Input/Output
Board (K560)
8 Way Relay
Extender
Board (K547)
6 Way Sounder
Extender
Board (K546)
4 Way Conventional
Detection Zone
Module (K545)
Choose any combination of I/O boards
DS46.02.2011
i O
Syncro
Addressable Sounder
Controller Unit
Features
Product Overview
Syncro addressable sounder controller units enable additional,
distributed power and control for sounder circuits in situations
where there are insufcient circuits at the fre alarm control
panel or where additional power is required to power heavily
loaded sounder circuits.
Sounder control modules for any of the protocols supported
by Syncro are available in a steel enclosure designed to match
the appearance of the Syncro fre alarm control panel.
All units contain mains powered battery charger/power supply,
they have space for up to 7 Ah batteries.
Indicators are provided for power healthy and power fault
conditions and power fault conditions are signalled to the
Syncro fre alarm control panel as a sounder fault.
Two, four or six way units available
Apollo, Argus Vega or Hochiki protocols
available
Integral power supply
Robust steel enclosure matches Syncro
control panel styling
Space for 7Ah batteries
Power Healthy and Power Fault indicators
DS46.04.2011
Construction
Finish
Colour - lid & box
Colour - labels
Mains voltage
supply

Mains fuse
Battery charge fuse
Battery
Operating
temperature
Operating humidity
Protocol
Epoxy powder coated
110 or 230V AC 50 or 60 Hz.
(specify when ordering,
default is 230V)
3A, 1 inch
20mm x 5mm, 500 milliamp
-5C to +50C
Apollo XP95, Argus Vega or
Hochiki ESP
-
-
-
-
-
-
-
-
-
-
-
Technical
Panels
Product
Code
A1725203
V1725203
H1725203
A1725403
V1725403
H1725403
A1725603
V1725603
H1725603
Sounder
Outputs
2
2
2
4
4
4
6
6
6
PSU
2.5A
2.5A
2.5A
5.25A
5.25A
5.25A
5.25A
5.25A
5.25A
Protocol
Apollo XP95
Argus Vega
Hochiki ESP
Apollo XP95
Argus Vega
Hochiki ESP
Apollo XP95
Argus Vega
Hochiki ESP
Model No. #1725203
i O
Syncro
Size (mm)
500 x 355 x 108
500 x 355 x 108
500 x 355 x 108
500 x 355 x 108
500 x 355 x 108
500 x 355 x 108
500 x 355 x 108
500 x 355 x 108
500 x 355 x 108
Page 44
BMS Communications Interface
Features
Product Overview
The all new OpenConnect system provides a simple means of
integrating Apollo protocol, Syncro or Syncro AS fre panel
networks with a wide range Building Management Systems
using any of the commonly used communications protocols.
A simple two wire connection from the fre panel network to
the OpenConnect hardware interface and an exported fle from
the Syncro Loop Explorer confguration programme is all that is
needed to realise a working BMS interface simply and quickly.
The OpenConnect system allows rapid deployment of a BMS
interface due to the use of a standard protocol specifcally
developed to allow fre panel integration without the need for
expensive and time consuming specialist building integration
engineering.
Once the system is confgured, a report is generated
containing all of the information on the BMS integrator
requires to provide a rapid solution to all BMS integration
requirements.
Compatible with all existing Apollo Syncro
or Syncro AS fre alarm systems
Simple, two wire connection to fre panel
Supports LonWorks, BACnet
TM
and Modbus
protocols
Easy to confgure interface via a standard
web browser
Confgurable to provide General (network
wide) event reporting, event reporting from
selected Syncro panels or event reporting
from individual Detection Device addresses

Individual Syncro Event types (fres, pre-
alarms, disablements, faults etc) can be
confgured to be passed to the BMS, based
on the selected panel reporting options
above.
Remote reporting only or remote reporting
with control options
Fully welded steel enclosure to match Syncro
fre alarm control panels
Simple 4 step process:
1. Connect OpenConnect hardware to a PC
2. Load confguration fle exported from Loop Explorer
3. Set up reporting options required (event types, by zone, by
point etc)
4. Print report and hand to BMS integrator
Open connect
N
E
W
!
DS66.02.2011
Operating humidity
Supply Voltage
-
-
-
Technical
0C to +50C
5% to 95% (non condensing)
230V or 115V AC
Contact Sales on +44 (0) 1322 222121 for product range
Panels
Product
Code
K8121110
K8121120
K8121111
K8121121
K8221110
K8221120
K8221111
K8221121
K8321110
K8321120
K8321111
K8321121
K8421110
K8421120
K8421111
K8421121
Ethernet
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
BMS Points
provided
200
200
200
200
1600
1600
1600
1600
12000
12000
12000
12000
25000
25000
25000
25000
Size (mm)
500 x 355 x 117
500 x 355 x 117
500 x 355 x 117
500 x 355 x 117
500 x 355 x 117
500 x 355 x 117
500 x 355 x 117
500 x 355 x 117
500 x 355 x 117
500 x 355 x 117
500 x 355 x 117
500 x 355 x 117
500 x 355 x 117
500 x 355 x 117
500 x 355 x 117
500 x 355 x 117
BATTERY BATTERY
Loops Loops Loops
DC OUT ON
HEART BEAT
BATTERY LOW
24V DC
F2 250V 3A
N
L
E
BATTERY DISCON.
S406
AC NORMAL
EARTH FLT
CHARGER FLT
230VAC 115VAC 50Hz or 60Hz 24-29VDC 4A MAX
EN54-4 (1997) + AC (1999) + A1 (2002) + A2 (2006)
INPUT VOLTAGE
FREQUENCY OUTPUT VOLTAGE POWER RATING
-
---
MODEL -
Model: #80161M2
BS EN54-2 : 1998 BS EN54-4 : 1998
Fire AlarmControl
3
2
1
?
More Events Fires More
Exit Enter
Enable Control Function Evacuate Reset Buzzer Silence (Acknowledge) Silence Alarm Re-Sound
Sounder Fault/Disabled
SystemFault
Power Fault
General Fault
General Disablement
More Events
Delay Active
Buzzer Silenced
On Test
Pre-Alarm
Power On
Test Lamp Alarm
Fire in Zone 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
Fire
Model: #80161M2
BS EN54-2 : 1998 BS EN54-4 : 1998
Fire AlarmControl
3
2
1
?
Exit Enter
SystemFault
Power Fault
General Fault
General Disablement
More Events
Delay Active
Buzzer Silenced
On Test
Pre-Alarm
Power On
Test Lamp Alarm
Fire in Zone 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
Fire
Model: #80161M2
BS EN54-2 : 1998 BS EN54-4 : 1998
Fire AlarmControl
3
2
1
?
Exit Enter
SystemFault
Power Fault
General Fault
General Disablement
More Events
Delay Active
Buzzer Silenced
On Test
Pre-Alarm
Power On
Test Lamp Alarm
Fire in Zone 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
Fire
OpenConnect
Gateway Web based
user interface
Fire Alarm Control Panel Network
BACnet TCP
Modus TCP
Lonworks FTT10
Automation
Network/BMS
R
S
4
8
5
Interface
PCB
OpenConnect interface
board (supplied with the
OpenConnect kit)
to be installed in any
Syncro or Syncro AS panel.
Note this panel cannot
have a printer tted
RS232
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
USB
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
RS485
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
Lonworks
FTT10
compatible
No
No
Yes
Yes
No
No
Yes
Yes
No
No
Yes
Yes
No
No
Yes
Yes
Ports - Note: 1 x RS485 port is used to
interface to the Syncro Panels
Conventional
Fire Detection
Control Equipment
Pages 48-61
EN54-4
Conventional Sounder
Controller Units
Page 55
Sigma Sounder
Sigma CP Conventional
Sounder Controller Units
Page 54
Sigma CP
EN54 Range Conventional
Fire Alarm C/Ps
Page 48-49
Sigma CP-A
Alarmsense Compatible
Conventional Fire Alarm C/Ps
Page 50-51
Sigma CP-R
Conventional Fire Alarm
C/P Repeaters
Page 52-53
K3000 Series
Conventional Fire Alarm C/Ps
Page 56-57
K3200 Series
C/P Repeaters
Page 58
Sigma Matrix
Mimic System
Page 60-61
LCMU
Line Continuity Monitoring Unit
Page 59
Conventional
Fire Detection
Control Equipment
Pages 48-61
N
E
W
!
Page 48
Control Panels
Features
Product Overview
The Sigma CP range consists of a series of conventional fre
alarm control panels designed in accordance with European
standards BS EN54-2 and BS EN54-4 Fire Detection and Fire
Alarm systems - Control and Indicating Equipment.
The range consists of 2, 4 and 8 zone control panels. All control
panels are available in two versions:
Sigma K11 range in which detectors and call points are
wired on separate circuits to sounders
(two sounder circuits are provided).
Sigma T11 range in which detectors, call points and
sounders are wired to the same pair of cables.
Commonly referred to as a two-wire system.
Wiring sounders to the detection circuits eliminates the need
to install sounder circuit cables and also ofers the ability to
provide zoned or two stage sounder operation. (T series only)
All control panels have an integral, mains powered battery
charger and power supply designed in accordance with the
requirements of BS EN54-4.
Fully certifed to BS EN54-2 and BS EN54-4
2-wire and standard versions in 2, 4 or 8
zones
Compatible for use on BS5839: Part 1: 2002
installations
2-wire repeaters and ancillary boards
Fully programmable using simple menu
options
Adjustable sounder delay time
Sounder confguration options
Zonal sounder delay detectors only
Zonal sounder delay call points only
Coincidence input selection

I.S Barrier selection by zone
Short circuit fre by zone
Non latching zones
Silent zones
Zone input delay
General panel confguration
Simple, single board construction
Installer friendly
Compatible with wide range of detection
devices
Two monitored sounder outputs
3 Amp power supply
Auxiliary power output
Model No. K11080M2
CP
Sigma
BS- EN54- 2
BS- EN54- 4
KM 73505
Note: For 2-wire T series panels, compatible detectors and call
points must be used. All sounders must be polarised.
Note: Also available is the Sigma Ancillary Board (K580) which
is compatible with all Sigma CP and CP-R panels which have
operating software version V2.0 or above.
See DS39 (pages 52-53) for more details.
Note: Also available is the Sigma Sounder Board (K461) which
See DS48 (page 54) for more details.
Part No. K580 Part No. K461
Specifcation
Construction
Finish
Colour - lid & box
Supply voltage
Mains supply fuse
Maximum battery size
Local fre contact rating
Fire contact rating
Detection zone current
Detection zone EOL resistor
Active EOL
Sounder output EOL resistor
Cable capacity
Operating humidity
Epoxy powder coated
230V AC (+10%/-15%)
1.6 Amp 250V
24V 3 Amps
30V DC 1 Amp
30V DC 1 Amp
30V DC 1 Amp
0.5A per output (max 1.6A over all outputs)
1.6 milliamps
6k8 5%
K14606K (optional)
10k 5%
2.5mm per terminal
-5C to +50C
<95% (non condensing)
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Panels
Product
Code
K11020M2
K11040M2
K11080M2
T11020M2
T11040M2
T11080M2
K18002
Description
2 zone control panel
2 zone, 2 wire panel
Tamper resistant
Vision Window *
Standby
Current
0.065 Amps
0.075 Amps
0.093 Amps
0.065 Amps
0.075 Amps
0.093 Amps
N/A
* Vision Window can be easily retroftted to any Sigma CP panel
Alarm
Current
0.1 Amps
0.21 Amps
0.55 Amps
0.15 Amps
0.3 Amps
0.63 Amps
N/A
Technical
DS37.08.2011
8
7
6
5
4
3
2
1
Model: K11080M 2
BS EN54-2 : 199 8
BS EN54-4 : 199 8
Fire Alarm Contro l
KM73505
Zone Chart General System Status
Disablemen t
Sounder Fault/
8 7 6 5
4 3 2 1
System Mode
(+1) (+10)
Zone Fault/Test/Disablement
Enter Selec t Mode Reset
Enable Contro l
Fire
Fire In Zone
Fire In Zone
Test Mode On
Delay On
Power On
Warning Silenced
Alarm/Faul t
Power Fault
Disablement
Genera l
System Fault
General Faul t
Test
Lamp
Alar m
Silence/Sound Alarm/Fault
Warning Silenc e
3
1
0
385 90
Size
385 x 310 x 90
385 x 310 x 90
385 x 310 x 90
385 x 310 x 90
385 x 310 x 90
385 x 310 x 90
385 x 310 x 90
Page 50
CP-A
Sigma
AlarmSense compatible twowire
conventional fre alarm control
and indicating panels
Features
Product Overview
The new Sigma CP-A AlarmSense range consists of a series of
conventional, 2, 4 and 8 zone fre alarm control panels
designed and approved in accordance with European
standards BS EN54-2 and BS EN54-4 Fire Detection and Fire
Alarm systems - Control and Indicating Equipment.

The AlarmSense system enables all devices in a given zone to
be wired to the same pair of cables thus greatly reducing the
cabling and installation requirements and hence costs.

The AlarmSense range of devices includes smoke and heat
detectors, call points, base sounders, base sounder/beacons
and relay units all wired to the same pair of cables.

Having sounders and sounder beacons installed on the same
cabling as detectors and call points allows all systems to be
confgured for common, zonal or two stage alarm by simply
setting one of the panels confguration options.

Selection of the AlarmSense local alarm feature at sounder or
sounder beacon bases invokes the alarm verifcation feature.
This is particularly useful in Houses of Multiple Occupation
such as student accommodation or nursing homes.
When sounder or sounder beacon bases are selected for local
alarm mode, any alarm sounders are restricted such that only
the sounder connected to the activated detector will operate
initially. The panel will attempt to reset the activated
detector after a time delay and if successful no further alarms
are sounded. If the detector re-activates after being reset, a
general alarm will sound throughout the premises.
Activation of a second detector or a call point will sound the
general alarm immediately

All control panels have an integral, mains powered battery
charger and power supply designed and approved in
accordance with the requirements of BS EN54-4.
Fully compliant with BS EN54-2 and
BS EN54-4

Allows systems to be installed in accordance
with BS5838: Part 6

2 wire systems, reduces installation cabling

2-wire repeaters and ancillary boards via
serial bus

Fully programmable using simple menu
options

Adjustable sounder delay time

Sounder confguration options

Zonal sounder delay for detectors only

Zonal sounder delay for call points only

Coincidence output via ancillary board

Short circuit fre selectable by zone

Non latching selection by zone

Silent zones (common sounder outputs)

Zone input delay for sprinkler system
connection

AlarmSense local alarm feature supported

Simple, single board construction

Installer friendly

Compatible with all AlarmSense devices

Two conventional monitored sounder
outputs

3 Amp power supply

Auxiliary power output
Ancillary PCB Part No. K580
Model No. A11080M2
Sounder PCB Part No. K461
N
E
W
!
Specifcation
DS65.02.2011
Construction
Finish
Colour - lid & box
Supply voltage
Mains supply fuse
Local fre contact rating
Fire contact rating
Common Sounder output rating
AlarmSense Sounder output rating
Detection zone current
Detection zone EOL resistor
Sounder output EOL resistor
Cable capacity
Operating humidity
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Technical
Epoxy powder coated
230V AC (+10%/-15%)
1.6 Amp 250V
24V 3 Amps
30V DC 1 Amp
30V DC 1 Amp
30V DC 1 Amp
0.5A per output
0.2A per output
1.6 milliamps
3K3 5%
10k 5%
2.5mm per terminal
-5C to +50C
Panels
Product
Code
KA11020M2
KA11040M2
KA11080M2
Description
Standby
Current
0.065 Amps
0.075 Amps
0.093 Amps
Alarm
Current
0.1 Amps
0.21 Amps
0.55 Amps
Options
Product Code
K580
K461
M2FCLGT
K02000M2
K02750M2
K18002
Description
Stand alone ancillary board
Sounder PCB
Bezel for semi fushing panel to wall
Boxed ancillary board
Boxed ancillary board with 0.75A PSU
Tamper resistant Vision Window *
* Vision Window can be easily retroftted to any Sigma CP-A panel
8
7
6
5
4
3
2
1
Model: KA11080M2
Fire Alarm Control
Zone Chart General System Status
Disablemen t
Sounder Fault/
8 7 6 5
4 3 2 1
System Mode
(+1) (+10)
Enter Selec t Mode Reset
Enable Contro l
Fire
Fire In Zone
Fire In Zone
Test Mode On
Delay On
Power On
Warning Silenced
Alarm/Faul t
Power Fault
Disablement
Genera l
System Fault
General Faul t
Test
Lamp
Alar m
Silence/Sound Alarm/Fault
Warning Silenc e
3
1
0
385 90
Size (mm)
385 x 310x 90
385 x 310 x 90
385 x 310 x 90
Page 52
Control Panel Repeaters
Sigma CP-R
Features
Ancillary PCB
Product Overview
The Sigma Ancillary Board is compatible with all
Sigma CP and CP-R panels which have operating
software version V2.0 or above.
The board provides common fre, common fault,
coincidence and zonal fre, volt free contacts
allowing control of sub-systems, graphical
mimics and plant, remotely from the main panel
over a two wire data bus.
Mains powered Ancillary boards require only a
two core data cable from the main control panel.
24V DC versions require an additional two cores
for power either from the main panel or from
another 24V DC source.
A mixture of Ancillary boards, Sounder boards
or Repeaters up to a maximum of 7 of each type
can be connected to a control panel and each is
allocated an address from 1 to 7 using a binary
coded DIL switch.
The total length of the data cable from the main
panel to the last repeater must not exceed 1200
metres.
Two wire serial connection
Up to 7 panels per system
230V AC or 24V DC powered versions
Full control over main panel
Volt free fre and fault contact outputs
Model No. E01080M2
Sigma CP-R
Product Overview
The Sigma CP-R Repeater is compatible with all Sigma CP
control panels which have operating software version V2.0 or
above.
Repeaters are available with 2, 4 or 8 zones and in mains
powered (K versions) or 24V powered (E versions).
Mains powered repeaters require only a two core data cable
from the main control panel. 24V DC versions require an
additional two cores for power either from the main panel or
from another 24V DC source.
A mixture of Repeaters, Ancillary boards or Sounder Boards
up to a maximum of 7 of each type can be connected to
a control panel and each is allocated an address from 1 to
7 using a binary coded DIL switch. The total length of the
data cable from the main panel to the last repeater must not
exceed 1200 metres.
Ancillary PCB
Features
Up to 7 boards per system
Open collector zonal fault outputs
Volt free fre, coincidence and common
fault contact outputs
Part No. K580
CP-R
& Anc i l l ar y PCB
Sigma
Note: Also available is the Sigma Sounder Board (K461) which
See DS48 (page 54) for more details.
Specifcation
Equipment
Construction
Finish
Colour - lid & box
Colour - Controls plate &
labels
Supply voltage (K models)
Supply voltage (E models)
Mains supply fuse
Fire contact rating
Cable capacity
Operating humidity
Epoxy powder coated
230V AC (+10%/-15%)
20-30V DC
1.6A 250V
24V 1 Amps
30V DC 1 Amp
30V DC 1 Amp
2.5mm per terminal
-5C to +50C
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Sigma CP-R
Technical
Product
Code
E01020L2
E01040L2
E01080L2
K01020M2
K01040M2
K01080M2
K580
K02000M2
K02750M2
K18002
Description
2 zone Sigma CP-R repeater panel
2 zone Sigma CP-R repeater panel with PSU
Stand alone ancillary board
Boxed ancillary board
Boxed ancillary board with 0.75A PSU
Tamper resistant Vision Window *
Standby
Current
0.075 Amps
0.075 Amps
0.075 Amps
0.075 Amps
0.075 Amps
0.075 Amps

0.020 Amps
0.020 Amps
0.020 Amps
N/A
* Vision Window can be easily retroftted to any Sigma CP-R panel
Alarm
Current
0.094 Amps
0.098 Amps
0.11 Amps
0.094 Amps
0.098 Amps
0.11 Amps

0.2 Amps
0.2 Amps
0.2 Amps
N/A
Supply
Voltage
24V DC
24V DC
24V DC
230V AC
230V AC
230V AC

24V DC
24V DC
230V AC
N/A
Construction (boxed)
Finish
Colour - lid & box
Supply voltage (K02750M2)
Mains supply fuse
Standby current
Full alarm current
Fire contact rating
Coincidence contact rating
Zonal contact rating
Cable capacity
Operating humidity
1.2mm mild steel
Epoxy powder coated
230V AC (+10%/-15%)
20-30V DC
1.6A 250V
24V 750mA
2.6Ah 12V (2 per panel)
20mA
190mA
30V DC 1 Amp
30V DC 1 Amp
30V DC 1 Amp
30V DC 1 Amp
2.5mm per terminal
-5C to +50C
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Ancillary PCB
Technical
Processor Reset Switch
Data Connection
Zonal Volt Free Contacts
Power Connection
Address Switch
ADDRESS
PROCESSOR
RESET
FUSE
FAIL OK COMMS
24V
DC
- + - +
- +
RS485
OUT
RS485
IN
NO NC C NO NC C NO NC C
COINC
RELAY
FAULT
RELAY
FIRE
RELAY
Z8
FIRE
Z7
FIRE
Z6
FIRE
Z5
FIRE
Z4
FIRE
Z3
FIRE
Z2
FIRE
Z1
FIRE
K580 Sigma CP Ancillary PCB
DS39.05.2011
Size
(mm)
385 x 310 x 60
385 x 310 x 60
385 x 310 x 60
385 x 310 x 90
385 x 310 x 90
385 x 310 x 90

155 x 136
385 x 310 x 90
385 x 310 x 90
Page 54
Sigma CP Conventional
Sounder Controller Units
Features
Product Overview
The Sigma CP Sounder Board is compatible with all Sigma CP
control panels which have operating software version V3.0 or
above.
The board provides 8 additional sounder outputs which can be
confgured as zoned, 2-stage or common alarm.
All sounder outputs are open and short circuit monitored and
any faults on the sounder outputs will be announced at the
main fre alarm panel as a sounder fault.
A class change input is provided which, when activated by a volt
free contact closing, will switch all sounder outputs on.
Mains powered units require only a two core data cable from
the main control panel. 24V DC versions require an additional
two cores from another 24V DC source which is suitably rated to
supply the total sounder current. 230V versions have their own
power supply which is rated to supply sounder loads up to 5.25
Amps.
Up to 7 Sounder boards can be connected to a control panel
and each is allocated an address from 1 to 7 using a binary
coded DIL switch. Sounder boards may be connected to the
Sigma CP serial bus in addition to Sigma CP ancillary boards and
Sigma CP-R repeater panels.
The total length of the data cable from the main panel to the
last repeater must not exceed 1200 metres. Once Sounder
boards have been recognised by the main panel, a fault will be
announced at the main panel if any become disconnected.
Up to 7 sounder boards per system
Zoned, 2-stage or common alarm
All outputs monitored for open and short
circuit faults
Individual open and short circuit fault
indicators
Fully monitored by main control panel
Class change input facility
Up to 8 outputs with 1A available from each
Can be connected to serial bus with Ancillary
boards and repeaters
Boxed units in enclosure to match Sigma CP
control panels
Power fault input for monitoring remote
power supplies
Construction (Boxed)
Finish
Colour - lid & box
Supply Voltage
(K04400M2)
Supply Voltage
(K04000M2)
Mains supply fuse
Class change input
Cable capacity
Operating humidity
1.2mm mild steel
Epoxy powder coated
230V AC (+10%/-15%)
20-30V DC
1.6A 250V
24V 5.25 Amp
1A per output
Volt free NOC
2.5mm per terminal
-5C to +50C
-
-
-
-
-
-
-
-
-
-
-
-
Technical
Panels
Product Code
K461
K04000M2
K04400M2
Description
Stand alone
sounder PCB
Boxed sounder PCB
Boxed sounder PCB
with 5.25 Amp PSU
PSU
24V DC
24V DC
230V DC
Model No. K04400M2
Sounder
Sigma
Size (mm)
155 x 136
385 x 310 x 90
385 x 310 x 90
Conventional Sounder
Controller Units
Features
Product Overview
Conventional Sounder controllers enable additional, distrib-
uted power and control for sounder circuits in situations where
there are insufcient circuits at the fre alarm control panel or
where additional power is required to power heavily loaded
sounder circuits.
The Sounder Controller Unit connects to conventional sounder
circuits and any faults on its outputs are transmitted to the fre
control panel via the incoming, triggering sounder circuit thus
maintaining full fault monitoring.
All units contain a mains powered battery charger/power
supply. There is space for up to 7 Ah batteries.
Indicators are provided for power healthy, power fault and
sounder fault conditions and power fault conditions are
signalled to the fre alarm control panel as a sounder fault.
Two four or six way units available
Integral power supply
Robust steel enclosure
Space for 7Ah batteries
Power Healthy, Power Fault and Sounder Fault
indicators
Full fault monitoring and integrity
maintained
DS48.05.2011
Construction
Finish
Colour - lid & box
Supply voltage
Mains fuse
Battery charge fuse
Power output
Battery
Operating humidity
Epoxy powder coated
230V AC (+10%/-15%)
3A, 1 inch
20mm x 5mm, 500 milliamp
24V at 2.5A
7Ah
-5C to +50C
-
-
-
-
-
-
-
-
-
-
Technical
Panels
Product Code
K1740203
K1740403
K1740603
Description
2 Way Sounder
Controller Unit
4 Way Sounder
Controller Unit
6 Way Sounder
Controller Unit
PSU
5.25A
5.25A
5.25A
Model No. K1725203
Sounder
Cont r ol l er
Size (mm)
500 x 355 x 108
500 x 355 x 108
500 x 355 x 108
Page 56
Control Panels
Features
Product Overview
The K3000 Series exceeds the requirements of BS5839: Part 4:
1988 in several areas. Inclusion of zone isolate, zonal one man
test, zonal contacts, shop unit interface and zoned or two stage
alarm outputs are all standard features.
A wide range of detectors are supported by the equipment,
ensuring that the K3000 Series control panels can be used
with existing installations without the need to change the
feld devices. Front panel controls and indicators are kept to a
minimum to simplify user operation and to maintain clarity of
indication. High intensity, twin bar LED indicators are used on all
front panels. All panels are supplied with suitable power supply
and generous battery space to give extended battery standby if
required.
Ample cable entries and removable chassis assist in ease of
installation. All panels are available as true fush or surface
mounting and in two tone grey or cream and brown.
Other colours are available to special order. Arrangements can
be made for special badging or special fnishes such as brass or
stainless steel.
K3000 Series control panels allow continued operation of call
points and detectors upon removal of a device from the detec-
tion line. This can be achieved either by ftting an active end of
line device or by using special line clamping bases.
Complies with BS5839: Part 4: 1988
Can be used on pre BS5839 type
systems
12 - 48 zones as standard more available
on request
Class change input
Common fre and fault contacts
Line continuity upon detector removal
Remote signal contact and isolate
Shop interface input
Zonal one man test
Zonal selection for operation with
intrinsically safe barriers
Zonal volt free contacts
Zone isolate facility
Compatible with most popular detectors
Option for plug-in two stage sounder
cards
Model No. K3024005
3000
Series
Specifcation
Panels
Construction
Finish
Standard colour
Sounder outputs
Isolatable fre contact
Auxiliary alarm contact
Fault contact
Zonal contacts
Auxiliary DC output
Detection zone
monitoring resistor
Sounder circuit
monitoring resistor
Remote control inputs

Mains supply

Call points
Alarm threshold
Short circuit threshold
Maximum zone
quiescent current
Active end of line
Operating humidity
Epoxy powder coated
2 outputs each fused at 1 amp each (0.5A E3002001)
Volt free changeover 1A at 30V DC
Volt free normally open 1A at 30V DC
Fused at 500mA
6k8
10k
Alarm input, Silence input, Reset input
(option for pulsed alarm input [Security Alert])
230V AC (+10%/-15%)
(other voltages upon request)
Require 470 OHM series resistor
100 to 900 Ohms
0 to 100 Ohms
1.6mA
K1406K (optional)
-5C to +40C
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Technical
Product
Code
E3012003
K3016005
E3016005
K3024005
E3024005
K3032007
E3032007
K3040007
K3048009
Zones
12
16
16
24
24
32
32
40
48
Standby
Current
0.2A
0.22A
0.22A
0.31A
0.31A
0.38A
0.38A
0.45A
0.52A
Flush mounting versions are available to order. All weights quoted are less standby batteries
Alarm
Current
0.34A
0.38A
0.38A
0.45A
0.45A
0.52A
0.52A
0.59A
0.66A
Sounder
Load per
Circuit
1.0A
1.0A
1.0A
1.0A
1.0A
1.0A
1.0A
1.0A
1.0A
Sounder
Load
total
1.5A
1.5A
1.0A
1.5A
1.0A
1.5A
1.0A
1.5A
1.5A
Minimum
Battery
(24h standby)
7.0Ah
7.0Ah
7.0Ah
12.0Ah
12.0Ah
12.0Ah
12.0Ah
15.0Ah
17.0Ah
PSU
2.5A
4.0A
2.5A
4.0A
2.5A
4.0A
2.5A
4.0A
4.0A
Weight
(approx)
8.6kg
11.0kg
11.0kg
11.5kg
11.5kg
20.0kg
20.0kg
20.5kg
24.0kg
Size (mm)
500 x 355 x 108
570 x 420 x 110
570 x 420 x 110
570 x 420 x 110
570 x 420 x 110
600 x 700 x 140
600 x 700 x 140
600 x 700 x 140
700 x 1000 x 145
Control
Panel
Wall
Flush mount cross section
DS01.11.2011
Page 58
Control Panel Repeaters
Model No. K3212001
3200
Series
Equipment
Product
Code
K3212001
K3216001
K3224001
K3232003
K3240005
K3248005
Weight
3.5kg
6.0kg
6.0kg
8.0kg
10.5kg
10.5kg
Size (mm)
365 x 290 x 88
365 x 290 x 88
365 x 290 x 88
500 x 355 x 108
570 x 420 x 110
570 x 420 x 110
Flush mounting versions are available to order,
see price guide
Zones
12
16
24
32
40
48
Construction
Finish
Colour
Voltage
Power consumption
Operating humidity
Epoxy powder coated
20V - 30V DC
20mA per zone
-5 to +50 deg. C
-
-
-
-
-
-
-
Technical
DS02.11.2011
Features
Product Overview
The K3200 series repeater panel uses a similar layout to the main
control panel and is ftted with the same high quality indicators.
In their discrete enclosure, they are well suited to areas where
space is limited and aesthetics are an important consideration.
As well as zonal fre indicators, system fault, system healthy and
buzzer muted indicators are provided. Controls are kept to the
practical minimum of lamp test and buzzer mute. Subsequent
alarm or fault conditions whilst the buzzer is muted will resound
the buzzer to alert personnel to changing
conditions.
Repeat panels are available as true fush or surface mounting
and in two tone grey or cream and brown as standard. Other
colours are available to special order. Arrangements can be
made for special badging or special fnishes such as brass or
stainless steel. Special repeater panels can be made to order.
Zonal fre indicators
Common fault and power on indicators
Lamp test push button
Internal buzzer with mute facility
Buzzer resound facility
DS20.09.2011
Finish
Colour
Normal current
Fault condition current
Max. zone cable resistance
Panel capacitor
Operating voltage
Terminal connections
Max. detectors supported
Lead colours
Conformal powder coating
Blue
5mA at 28V
750uA 50V
20 ohms
47uF 50V
15V to 30V
Bootlace ferrules
20 per zone
K1406K - pink/black
K1406C - orange/black
K1406N - red/black
-
-
-
-
-
-
-
-
-
-
Technical
Panels
Product Code
K14060
NF14060
KID14060
Description
Line Continuity
Monitoring Unit 6k8
Line Continuity
Monitoring Unit 5k6
Line Continuity
Monitoring Unit 3k9
47uF
Not required on
K3000 series or
Sigma CP panels
470R
Z
Z
LCMU
DETECTOR
POINTS
CALL
470R
DETECTOR
POINTS
CALL
ON ZONE
LAST DEVICE
CONTROL
PANEL
LCMU
Size (m)
25 x 20 x 8
25 x 20 x 8
25 x 20 x 8
Line Continuity
Monitoring Unit
Product Overview
To use this method of monitoring, the breaking connection
of the detector base must be ftted with a diode. To ensure
correct operation over a wide supply voltage range and
with up to 20 detectors removed, a Schottky type BYV-1060
is recommended. These devices are, however, very
sensitive to electrostatic discharge and extra care should
be taken when handling or cable testing.
It is also necessary to ft a 47uF capacitor to the detection
line terminals on some of the control panels (not K3000
series or Sigma CP). Extreme care should be taken when
ftting the capacitor in the panel as they are polarity
conscious. The LCMU itself is also polarity conscious and
the polarity is indicated in the normal manner i.e. black
wire is always negative. A wrongly connected LCMU will
produce a short circuit fault condition.
Due to the use of surface mount technology components,
the LCMU is probably the smallest device of its kind on the
market. This enables the device to be ftted either within
the last device on a zone or in the back box, eliminating the
need for an additional wiring point.
Features
Easy to install
No additional wiring point
Low cost
Sub-miniature design
Environmentally sealed
Page 60
Mimic System
Features
Product Overview
The Sigma Matrix system uses fexible, fbre optic light guides to
illuminate areas on a foor plan, laid over a high resolution grid.
This unique system dispenses completely with wiring and ena-
bles indicators to be moved, removed or added on site without
the need for any wiring.
All indicators can be confgured to operate via switched positive
or negative inputs providing compatibility with a wide range of
input/output boards. Sigma Matrix can be supplied with or
without common LEDs and controls. Optional LEDs indicate
Power on, Fire and Fault and optional controls are for Buzzer
silence and Lamp test.
Housed in attractive, slimline enclosures to match Sigma fre
alarm panels and with high quality, full colour or monochrome
foor plans, Sigma Matrix provides a clear, geographical
indication of fre alarm activation enabling speedy identifcation
of the source of an alarm.
Available in a range of standard
enclosures to suit any application
Bespoke sized units can be made
upon request
Choice of Red, Green or Yellow LEDs
Available with or without controls
Same look and feel as Sigma range
Sigma Matrix can easily be upgraded
on site with minimal cost and efort
EN54-4 approved PSU (optional)
M3 size Sigma Matrix
View showing mimic mounted
on inner door
View showing LED grid
View showing internal layout
Mat r i x
Sigma
PSU opt ional
Specifcation
Construction
Finish
Colour - lid & box
Mimic
Number of indicators
(standard models)
Mains supply*
Mains supply fuse*
Power supply rating*
Maximum ripple current*
Battery type* (Yuasa NP)
Battery charge voltage*
Battery charge current*
Max. current draw from batteries*
Supply voltage (24V versions)
Terminal capacity
Cabinet locks
Maximum distance from
control panel
IP rating
1.2mm mild steel
Epoxy powder coated
3mm Clear Anti-Glare Acrylic
M2 size - up to 32, M3 and S3 size - up to 64,
S4 size - up to 96
230V AC +10% - 15% (100 Watts max.)
T2A L250V Replace only with similar type
5.25 Amps total including battery charge 28V +/ 2V
200 millivolts
Two 12 Volt sealed lead acid (7Ah maximum)
1.5A maximum
3 Amps. With mains power source disconnected
18 to 30V DC
M2/M3 - standard 801 key, S3/S4 - standard KT3001 key
1km with 1.5mm2 cable
IP30
-5C to +50C
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Technical
Max. number of
LEDs = 64
Will house 1 x LED
driver PCB and
1 x 32 LED
extension PCBs
Enclosure Size Options
Max. number of
LEDs = 64
driver PCB and
1 x 32 LED
extension PCBs
Max. number of
LEDs = 96
driver PCB and
2 x 32 LED
extension PCBs
Max. number of
LEDs = 320
driver PCB and up to
9 x 32 LED
extension PCBs
Max. number of
LEDs = 32
driver PCB
385mm x 310mm
90mm Deep
500mm x 355mm
117mm Deep
385mm x 520mm
110mm Deep
500mm x 650mm
137mm Deep
Colour/Finish & Size
to suit your requirements
M2
S3
M3
S4
Bespoke Size
303
400
225
400
303
515
400
?
?
185
DS59.02.2011
* 230 V Versions only
Extinguishant
System Control
Equipment
Pages 64-81
Sigma Si
Status Units and hold of switch
for use with Sigma XT/XT+
Page 70-71
Syncro XT+
Multi Area Addressable
Extinguishant Control Panels
Page 74-75
Sigma XT Ancillary PCB
Extinguishant Ancillary PCB
Page 72-73
Sigma A-Si
Status Units and abort switch
for use with Sigma A-XT
Page 78-79
C
O
M
I N
G
S
O
O
N
Extinguishant
System Control
Equipment
Pages 64-81
Sigma XT
EN12094 Extinguishant
Control Panels
Page 64-65
Sigma XT+
Multi Area Extinguishant
Control Panels
Page 66-67
Sigma XT+
Extinguishant Coincidence Unit
Page 68-69
Sigma A-XT
UL Listed FM Approved
Page 76-77
Sigma A-XT Ancillary PCB
UL Listed FM Approved
Extinguishant Ancillary PCB
Page 80-81
N
EW
!
N
EW
!
N
EW
!
Page 64
Extinguishant Control Panel
Features
Product Overview
quality controlled environment and with European EN12094-1
approvals, the Sigma XT extinguishant releasing panel ofers
outstanding value and performance for all small to medium
fxed frefghting installations.
With three detection zones as standard, extinguishant release
can be confgured to activate from any combination of detection
zone inputs to allow (among other combinations) any two from
three type activations such as would be required for detection in
ceiling void, room and foor void applications.
The extensive confguration options of the Sigma XT allow the
functionality of the system to be extensively modifed while still
complying with the requirements of the controlling standard for
the equipment (EN12094-1).
The panel contains a large LED display to enable easy
confguration and control which also displays the time
remaining until extinguishant release for added user safety.
The countdown timer is duplicated on up to seven remote status
units to provide local indication of the extinguishant system
status.
With all of the electronics mounted on a single, easily
removable, steel plate Sigma XT panels are both robust and easy
to install.
Sigma XT is supplied in an enclosure that matches the
design and colour of the Sigma CP range.
Three detection zones as standard
Any single zone or any combinations of
zones can be confgured to release
Confgurable frst stage sounder delays
Confgurable detection delays
Zero time delay upon manual release
option
Compatible with I.S. barriers
Non-latching zone input option to
receive signals from other systems such
as aspirating equipment
Confgurable extinguishant delays up to
60 seconds in 5 second steps
Confgurable extinguishant duration up
to 5 minutes in 5 second steps
Countdown timer shows time remaining
until release
Supports up to seven, four wire status
indicators
Built in Extract Fan control
Programmable
Functions
Access Level 2
Test Zones 1 to 3
Disable Zones 1 to 3
Disable 1st Stage Alarms
Disable Pre-activated 1st Stage Relay
Disable Pre-activated 2nd Stage Relay
Disable Extract Fan Output
Disable Manual Release Input
Disable Extinguishant Sub System
Activate Extract Fan Output
Activate Alarm Delays
Access Level 3
Sounder Delay
Coincidence Detection
Disable Panel Features
Zone Alarm Delays (Detectors)
Zone Alarm Delay (Call Points)
Confgure Zone for I.S Barrier Use
Zone Short Circuit Alarm
Zone Non Latching
Zone Inputs Delay
Extinguishant Release Time Delay
Extinguishant Release Duration Timer
Extinguishant Reset Delay Timer
Model No. K11031M2
XT
Sigma
BS- EN12094- 1
KM 96761
Specifcation
Panels
Construction
Finish
Colour - lid & box
Mains supply
Mains supply fuse
Power supply rating
Battery fuse
R0V output
Sounder outputs
Fault relay contact rating
Fire relay contact rating
Local fre relay contact rating
First stage contact rating
Second stage contact rating
Extract contact rating
Zone quiescent current
Terminal capacity
Number of detectors per zone
Number of sounders per circuit
Detection circuit end of line
Monitored input end of line
Sounder circuit end of line
Extinguishant output EOL
No. of detection circuits
No. of sounder circuits
Extinguishant release output
Extinguishant release delay
Extinguishant release duration
SIL, AL, FLT, RST inputs
Zone normal threshold
Detector alarm threshold
Call point alarm threshold
Head removal condition
Cabling
Monitored inputs normal threshold
Monitored inputs alarm threshold
Monitored inputs Short circuit threshold
Status unit/Ancillary board connection
Status unit power output
Epoxy powder coated
230V AC +10%/-15% (100 Watts maximum)
1.6 Amp (F1.6A L250V)
3 Amps total including battery charge 28V +/- 2V
200 millivolts
Two 12 Volt 7Ah sealed lead acid in series
0.7A maximum
20mm, 3.15A glass
3 Amps
0.095A
Fused at 500mA with electronic fuse
24V Fused at 500mA with electronic fuse
30VDC 1A Amp maximum
2mA maximum
0.5mm to 2.5mm solid or stranded wire
Dependent on type (maximum 32)
Dependent on type (max. 0.5A per sounder circuit)
6K8 5% Watt resistor
10K 5% Watt resistor
1N4004 Diode
3
2 x 1st Stage, 1 x 2nd Stage
Fused at 1 Amp
Adjustable 0 to 60 seconds (in 5 second steps)
Switched -ve, max resistance 100 Ohms
8K ohms to 1K ohm
999 ohms to 400 ohms
99 ohms to 0 ohms
15.5 to 17.5 volts
FP200 or equivalent
8K ohms to 1K ohm
99 ohms to 0 ohms
Two wire RS485 connection
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Technical
Product
Code
K11031M2
K11031F2
Description
Surface mounting panel
Flush mounting panel
Size (mm)
385 x 310 x 90
415 x 315 x 86
EXTRACT REL
PRESS.
SWI TCH
LOW
PRES.
SWI TCH
EXTI NG. HOLD
RELEASE
MAN.
SELECT
MODE 2ND
STAGE
1ST
STAGE SOUNDER
2ND POWER DATA
STATUS UNI TS
REMOTE
CONTROL
AUX
24V
C NO NO C NC NO C NC
ZONE 3
E
ZONE 1 ZONE 2 S2 S1
RST R0V SI L AL FLT NO C NC NO C NC NO C NC
FI RE
RELAY
LOCAL
FI RE
FAULT
RELAY
S
S
S
S
S
S
S
S
4
7
0
R
4
7
0
R
4
7
0
R
4
7
0
R
6
K
8
6
K
8
6
K
8
6
K
8
6
K
8
D
I
O
D
E
4
7
0
R
S
O
L
10K
6
K
8
6
K
8
6
K
8
10K 10K
To St at us
Unit s
Remot e
Cont rol
I nput s
1st St age
Sounders
2nd St age
Sounders
Auxiliary Signalling Relays
S
t
o
p

A
i
r

C
o
n
d
i
t
i
o
n
i
n
g
R
e
m
o
t
e

A
u
t
o
/
M
a
n
u
a
l
S
e
l
e
c
t

S
w
i
t
c
h
R
e
m
o
t
e

M
a
n
u
a
l
R
e
l
e
a
s
e

S
w
i
t
c
h
R
e
m
o
t
e

H
o
l
d

S
w
i
t
c
h
E
x
t
i
n
g
u
i
s
h
a
n
t

R
e
l
e
a
s
e
d
P
r
e
s
s
u
r
e

S
w
i
t
c
h
R
e
l
e
a
s
i
n
g

S
o
l
e
n
o
i
d
E
x
t
i
n
g
u
i
s
h
a
n
t

L
o
w
P
r
e
s
s
u
r
e

S
w
i
t
c
h
R
e
l
e
a
s
i
n
g
D
e
t
e
c
t
o
r
s
P
e
r
i
p
h
e
r
a
l
D
e
t
e
c
t
o
r
s
E
x
t
r
a
c
t

F
a
n

P
o
w
e
r
S
h
u
t
d
o
w
n

P
o
w
e
r
Sigma XT PCB
DS40.06.2011
Page 66
Multi- Area Extinguishant
Control Panels
Features
Product Overview
Sigma XT+ control panels are multi-area extinguishant control
panels complying with EN12094-1.
Up to 8 zones of conventional detection with up to 4
extinguishant areas are available.
Stand alone extinguishant control units are also available with
2 monitored inputs to receive initiating signals from remote fre
detection control panels or addressable modules.
Each extinguishant area has a comprehensive set of inputs and
outputs and is confgurable via a simple programming interface.
All extinguishant areas may have up to 7, serially connected
Sigma Si status indication and control units or ancillary relay
boards connected via a simple 4 core cable.
The versatility of the control panel can be enhanced further by
the ftting of up to 7 Sigma CP Ancillary boards (K580) or Sigma
CP Sounder boards (K461) to the RS485 serial bus. See data
sheet DS39 (page 52-53) and DS48 (page 53-54).
For compatible status units see Sigma Si data sheet DS41 (page
70-71).
2, 4 or 8 detection zones
1 to 4 extinguishant areas
Dual extinguishant outputs for each area
(confgurable as Main/Reserve)
First and second stage sounder outputs
for each area
First and second stage volt free
changeover contacts for each area
Released volt free contact per area
Fault volt free contact per area
Programmable extinguishant delays
Programmable output duration
Extract fan control
Countdown indicator shows time until
release in seconds
Mode select and manual release controls
per area
Monitored remote manual release input
Monitored remote Hold input
Monitored remote Mode select (door
interlock) input
Monitored remote Released pressure
switch input
Monitored remote Low Pressure switch
input
Monitored Abort input
Serial connection for Sigma Si status
units and ancillary boards. (K588)
Sigma XT Ancillary
Board - K588
Sigma CP Ancillary
Board - K580
Sigma CP Sounder
Board - K461
XT+
Sigma
Model No. K21082M3
Specifcation
Construction
Finish
Colour - lid & box
Mains supply
Mains supply fuse
Power supply rating (1 & 2 area units)
Battery fuse
Current draw in mains fail condition

Sigma XT+ module Aux 24V output
Sigma CP Aux 24V output
1st and 2nd stage Sounder outputs
Terminal capacity
Extinguishant output end of line
No. of detection circuits
Zone normal threshold (Allowable EOL)
Head removal condition
Cabling
(Allowable EOL)
Epoxy powder coated
230V AC, 50Hz +10% - 15% (100 Watts maximum)
1.6 Amp ( F1.6A L250V)
5.25 Amps including battery charge 28V +/- 2V
200 millivolts
0.7A maximum
20mm, 3.15A glass
54 milliamps per module
3A (K21021, K21041, K21042, K21081, K21082)
4A (K21083, K21084)
Fused at 500mA with electronic fuse - 1 per extinguishant area
Fused at 2.5A - not available to user
21 to 28V DC Fused at 1A with electronic fuse
5 to 30VDC 1A Amp maximum for each
0mA minimum, 2mA maximum
Dependent on type - typically 20
Dependent on type and current consumption - typically 20+
6K8 +/- 5% Watt resistor
10K +/- 5% Watt resistor
1N4004 Diode
Two to eight. 21 to 28V DC
Dependent on model 21 to 28V DC
21 to 28V DC. Fused at 1 Amp
Adjustable 0 to 60 seconds (+/- 10%)
Adjustable 60 to 300 seconds
Switched -ve, min resistance 0 ohms, max resistance 100 Ohms
10K ohm to 2K ohm
1K ohms to 390 ohms
130 ohms to 0 ohms
15.5 to 17.5 volts
FP200 or equivalent (max capacitance 1uF max inductance 1 mH
10K ohm to 2K ohm

2K ohms to 150 ohms +/- 5%
140 ohms to 0 ohms +/- 5%
Two wire RS485 connection (EIA-485 specifcation)
21 to 28V DC. Fused at 500mA with electronic fuse
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Technical
Panels
Product Code
K21021M3
K21041M3
K21042M3
K21081M3
K21082M3
K21083M4
K21084M4
Areas
1
1
2
1
2
3
4
Size (mm)
385 x 520 x 110
385 x 520 x 110
385 x 520 x 110
385 x 520 x 110
385 x 520 x 110
385 x 700 x 145
385 x 700 x 145
Zones
2
4
4
8
8
8
8
DS50.03.2011
Page 68
Extinguishant
Coincidence Unit
Features
Product Overview
The Sigma XT+ ECD coincidence unit has two fully monitored
inputs for connection to fre detection control equipment or
addressable control modules to provide an EN12094-1
compliant extinguishant control system.
Its many programmable features and extensive range of inputs
and outputs make the Sigma XT+ ECD coincidence unit
suitable for all extinguishing applications where a fully featured
control device is required.
Among the many features of the Sigma XT+ ECD are serially
connected status units for reduced wiring and reduced
installation cost, dual extinguishant outputs that may be
confgured for main/reserve applications and a countdown
timer which displays the time until discharge of the
extinguishant in seconds.
All units are independently confgurable via a simple, code
based programming interface to suit the desired application.
Dual extinguishant outputs
First and second stage sounder outputs
First and second stage relay contacts
Main reserve facility
Serial connection to status units
Discharge countdown time indicator
Model No. K21001M2
XT+
Sigma
Specifcation
Product Code
Size
Construction
Finish
Colour - lid & box
Colour - controls plate
& labels
Areas
Mains supply
Mains supply fuse
Power supply rating

Maximum Battery
Capacity within Enclosure
Battery fuse
Current draw in
mains fail condition
Maximum current draw
from batteries
Aux 24V output
1st and 2nd stage
Sounder outputs
K21001M2
385mm(W) x 310mm(H) x 90mm(D)
Epoxy powder coated
1
230V AC, 50Hz +10% - 15%
(100 Watts max.)
1.6 Amp ( F1.6A L250V)
5.25 Amps total including
battery charge 28V +/- 2V
200 millivolts
12 Volt sealed lead acid in series
Yuasa 2.3Ah
27.6VDC nominal
(temperature compensated)
0.7A maximum
20mm, 3.15A glass
54 milliamps
4 Amps
Fused at 500mA with
electronic fuse
21 to 28V DC Fused at 1A with
electronic fuse
5 to 30VDC 1A Amp
maximum for each
5 to 30VDC 1A Amp
maximum for each
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Technical
Local fre relay
contact rating
Terminal capacity
Number of sounders
per circuit
Extinguishant output
end of line
Extinguishant release
duration
Monitored inputs normal
threshold
Monitored inputs alarm
threshold
Monitored inputs Short
circuit threshold
Status unit/Ancillary
board connection
5 to 30VDC 1A Amp
maximum for each
5 to 30VDC 1A Amp
maximum for each
5 to 30VDC 1A Amp
maximum for each
5 to 30VDC 1A Amp
maximum for each
0mA minimum,
2mA maximum
0.5mm2 to 2.5mm2 solid or
stranded wire
Dependent on type and
current consumption
1N4004 Diode
(+/- 10%)
(Allowable EOL)
10K ohm to 2K ohm
(EIA-485 specifcation)
21 to 28V DC, Fused at
500mA with electronic fuse
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
DS55.04.2011
230V
RS485
Sigma CP
Ancillary
Board (S580)
Sigma CP
Sounder
Board (S461)
24V
Power Supply
EN54-4 : 1998
L4 L5 L3
L
E
N

1. 2. 3. 4. 5. 6.
FUSE-T2A
250V HRC
KENTEC ELECTRONICS LTD
LOAD
28V DC
L2 L1
24V
BATT.
TIME DELAYTYPET2A250V
230V AC ENS400
REPLACE FUSE ONLYWITH 20mm
2A INPUT CURRENT -
L5 - CHGR. FAULT L4 - EARTH FAULT L3 - BATTERY LOW L2 - BATT DISCON. L1 - MAINS FAIL
CHARGER FAIL
BATT. DISCONN.
6. 5. 4. 3. 2. 1.
COMMON FAULT
EARTH FAULT BATTERY LOW
MAINS FAILED
112W 28V DC 50 - 60Hz
- MODEL
---
-
POWER RATING OUTPUTVOLTAGE FREQUENCY
INPUT VOLTAGE
L5 L4
L1 L2
L3
K588
Ancillary
Board
System
Status &
Control
K588
Ancillary
Board
System
Status &
Control
Up to 4 Sigma XT+ coincidence units may be tted
1
Sigma CP-R
Repeater Panel
(Up to 7)
Sigma CP
Control Panel
RS485 RS485
Up to 7
Ancillary
Boards
Up to 7
Status
Units
Up to 7
Ancillary
Boards
Up to 7
Status
Units
230V
K588
Ancillary
Board
System
Status &
Control
K588
Ancillary
Board
System
Status &
Control
Sigma XT+
Coincidence
Unit
Sigma XT+
Coincidence
Unit
Sigma XT+
Coincidence
Unit
Sigma XT+
Coincidence
Unit
Syncro
Control Panel
RS485 RS485
Up to 7
Ancillary
Boards
Up to 7
Status
Units
Up to 7
Ancillary
Boards
Up to 7
Status
Units
Loop
Module
Loop
Module
Example Schematic 1
Example Schematic 2
Page 70
Extinguishant
Status Indicators
Sigma Si
Product Overview
The Sigma Si range of status indicators provide detailed status
information for Sigma XT/XT+ extinguishant release control
equipment.
All models provide high brightness, LED indication of Manual
Only, Automatic and Manual, Hold operated, Disabled, Imminent
and Released conditions. Models are also available with zonal
fre indicators and a common fault indicator.
For systems where local control of the Automatic/Manual mode
and or a Manual extinguishant release control are required, units
are available with these controls ftted.
All models have monitored inputs for the remote connection of
Automatic/ Manual mode and Hold switches.
All units contain a large, LED display which shows a countdown
of the time remaining until the extinguishant is released in
seconds.
Hold of
Product Overview
Available with red or green actuators (BS 7273-1 recommends
white with red button)
Shrouded push button to prevent accidental operation
Fitted with normally open and normally closed contacts to allow
operation with monitored and unmonitored systems
Robust all steel enclosure
Model No. K911113M8
Model No. K911000M8
Model No. K911100M8 Model No. K911111M8
Model No. K911110M8
Sigma Si
Features
Certifed compliant with BS EN12094-1 when
used with Sigma XT control equipment
High brightness LEDs
Detailed indication of the status of the
control panel
Monitored data connection
until release
Manual only and Automatic & Manual mode
select keyswitch option
Four wire connection (data and power)
Protected dual action manual release switch
option
Option for zonal fre and common fault
indication with buzzer
Robust, high quality enclosure
Easy access to terminals
Remote Auto/Manual door interlock input
(monitored)
Remote Hold input (monitored)
Internal fault diagnosis indicators
Weatherproof IP65 versions available
Internal buzzer
Model No. K91000M10
Si
& Hol d Sw i t c h
Sigma
Specifcation
256mm
1
7
0
m
m
Construction
Colour - lid & box
Contacts
Trigger resistor
White
1 N.O and 1 N.C
470R 1 Watt
-
-
-
-
Equipment
Product Code

K911000M8
K911000F8
K911100M8
K911100F8
K911010M8
K911010F8
K911110M8
K911110F8
K911113M8*
K911113F8*

W911000W8
W911100W8
W911110W8
W911113W8*

K91000M10
KB91000M10
Description
6 lamp status unit surface
6 lamp status unit fush
6 lamp status unit with mode select keyswitch surface
6 lamp status unit with mode select keyswitch fush
6 lamp status unit with manual release surface
6 lamp status unit with manual release fush
6 lamp status unit with mode select keyswitch and manual release surface
6 lamp status unit with mode select keyswitch and manual release fush
10 lamp status unit with mode select keyswitch and manual release surface
10 lamp status unit with mode select keyswitch and manual release fush

IP65 - 6 lamp status unit surface
IP65 - 6 lamp status unit with mode select keyswitch surface
IP65 - 6 lamp status unit with mode select keyswitch and manual release surface
IP65 - 10 lamp status unit with mode select keyswitch and manual release surface

Extinguishant hold of switch unit - green button
Extinguishant hold of switch unit - red button
Construction
Colour - lid & box
Power supply
Max. number of status units
Quiescent current
Cable capacity
Monitored inputs end
of line resistor
Monitored inputs
normal threshold
Monitored inputs
trigger threshold
Monitored inputs
Data connection
21 to 30 V DC
0.07A
7
0.033A
2.5mm per terminal
6K8 0.5W Resistor
8K ohm to 1K ohm

99 ohms to 0 ohms
(max 1200 metres)
-
-
-
-
-
-
-
-
-
-
-
Hold of
Technical
Sigma Si
Technical
Fire Zone 3
Fire Zone 2
Fire Zone 1
Fault
Released
Imminent
Disabled
Hold Activated
Auto/Manual
Manual Only
available
on 10 lamp
units only
DS41.04.2011
Weatherproof Version
Model No. W911113W8*
* Not suitable for Sigma XT+ / Syncro XT+ or Sigma XT+ ECU products
Size (mm)
186 x 132 x 50
186 x 132 x 55
186 x 132 x 50
186 x 132 x 55
186 x 132 x 50
186 x 132 x 55
186 x 132 x 50
186 x 132 x 55
186 x 132 x 50
186 x 132 x 55
256 x 170 x 60
256 x 170 x 60
256 x 170 x 60
256 x 170 x 60
97 x 97 x 45
97 x 97 x 45
Page 72
Extinguishant
Ancillary PCB
Ancillary PCB
Product Overview
The Sigma XT Ancillary Board is compatible with all Sigma XT control
panels which have operating software version SIGXT_11A.HEX or
above.
The board provides volt free normally open contacts allowing
control of sub-systems and plant remotely from the main panel over
a two wire data bus.
Mains powered, boxed Ancillary boards require only a two core data
cable from the main control panel. 24V DC versions require an
additional two cores for power either from the main panel or from
another 24V DC source.
Up to 7 Ancillary boards can be connected to a control panel and
each is allocated an address from 1 to 7 using a binary coded DIL
switch. The total length of the data cable from the main panel to the
last repeater must not exceed 1200 metres.
A mixture of status units and Ancillary boards, up to a maximum of 7
of each type, can be connected to the serial data bus.
Ancillary PCB
Features
Up to 7 per system
Volt free relay outputs for fre
and extinguishing system status

Relay operated LED indicators
Model No. K1822
R
S
4
8
5
2
4
V

D
C
I
N
O
U
T
M
O
D
E
H
O
L
D
Status
PCB
6K8
6K8
470R
470R
To next Status Unit if tted
From previous status
unit or control panel
Equipment
Product Code

K588
K03000M2
K03750M2
Description
Stand alone ancillary PCB
Boxed ancillary PCB
Boxed ancillary PCB with 0.75A PSU
Size (mm)
155 x 136
385 x 310 x 90
385 x 310 x 90
Colour - lid & box
Mains supply fuse
Contact ratings
Cable capacity
Operating humidity
BS 00 A 05 grey - fne
texture
230V AC (+10%/-15%)
20-30V DC
1.6A 250V
24V 0.75 Amp
30V DC 1 Amp
2.5mm per terminal
-5C to +50C
-
-
-
-
-
-
-
-
-
-
Ancillary PCB
Technical
Si
Anc i l l ar y PCB
Sigma
Specifcation
DS75.01.2011
ADDRESS
PROCESSOR
RESET
FUSE
FAIL OK Z1 Z2 Z3 MAN DISAB REL ACT EXTR HOLD
MAN
REL
- +
24V
DC
24V
DC
- + - +
PF Z1
FIRE
Z2
FIRE
Z3
FIRE
MAN
MODE
DISAB REL ACT HOLD EXTR MAN
REL
- +
RS485
OUT
RS485
IN
System Status
and Control
System Status
and Control
System Status
and Control
EN12094-1 Approved Control Unit
Detection Zone 1
Detection Zone 2
Detection Zone 3
1
s
t

S
t
a
g
e

S
o
u
n
d
e
r
s
2
n
d

S
t
a
g
e

S
o
u
n
d
e
r
s
H
o
l
d
M
a
n
u
a
l

R
e
l
e
a
s
e
D
o
o
r

I
n
t
e
r
l
o
c
k
4 Core
Ancillary
Board
Ancillary
Board
BMS
Interface
Addressable
House Fire Alarm
Activate Extinguisher
Released Pressure Switch
Low Pressure Switch
4 Core
Example System Schematic
Page 74
Multi-Area, Addressable
Features
Product Overview
Syncro XT+ control panels are multi-area extinguishant control
panels complying with EN12094-1.
Up to 16 zones of addressable detection over 1 or 2 loops ensure
every detector is able to contribute to extinguishant release. Up
to 4 extinguishant areas are available.
Stand alone extinguishant control units are also available with
2 monitored inputs to receive initiating signals from remote fre
detection control panels or addressable modules.
Each extinguishant area has a comprehensive set of inputs and
outputs and is confgurable via a simple programming interface.
All extinguishant areas may have up to 7, serially connected
Sigma Si status indication and control units or ancillary relay
boards connected via a simple 4 core cable.
For compatible status units see Sigma Si data sheet DS41 (page
70-71).
16 detection zones
Up to 4 extinguishant areas
Dual extinguishant outputs for each area
(confgurable as Main/Reserve)
First and second stage sounder outputs for each
area
First and second stage volt free changeover
contacts for each area
Released volt free contact per area
Fault volt free contact per area
Programmable extinguishant delays
Programmable output duration
Countdown indicator shows time until release
in seconds
Mode select and manual release controls per
area
Monitored remote manual release input
Monitored remote hold input
Monitored remote mode select (door interlock)
input
Monitored remote released pressure switch
input
Monitored Abort input
Serial connections for Sigma Si status units and
ancillary boards. (K588)
Model No. #32162M3
C
O
M
I
N
G
S
O
O
N
XT+
Syncro
Specifcation
Construction
Finish
Colour - lid & box
Mains supply
Mains supply fuse
Battery fuse
Current draw in mains fail condition

Sigma XT+ module Aux 24V output
Syncro AS Aux 24V output
1st and 2nd stage Sounder outputs
Terminal capacity
Extinguishant output end of line
Number of detection loops
Number of zones
Cabling
Epoxy powder coated
230V AC, 50Hz +10% - 15% (100 Watts maximum)
1.6 Amp ( F1.6A L250V)
4 Amps including battery charge 28V +/- 2V
200 millivolts
0.7A maximum
20mm, 3.15A glass
54 milliamps per extinguishing module
3A (#31161M3, #32161M3, #31162M3, #32162M3)
5.25A (#31163M4, #32163M4, #31164M4, #32164M4)
Fused at 500mA with electronic fuse - 1 per extinguishant area
Fused at 2.5A - not available to user
21 to 28V DC Fused at 1A with electronic fuse
Dependent on type and current consumption - typically 20+
1N4004 Diode
1 or 2
16
Dependent on model 21 to 28V DC
Adjustable 0 to 60 seconds (+/- 10%)
Switched -ve, min resistance 0 ohms, max resistance 100 Ohms
FP200 or equivalent (max capacitance 1uF max inductance 1 mH
10K ohm to 2K ohm
Two wire RS485 connection (EIA-485 specifcation)
21 to 28V DC. Fused at 500mA with electronic fuse
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Technical
Panels
Product Code

#31161M3
#32161M3
#31162M3
#32162M3
#31163M4
#32163M4
#31164M4
#32164M4
Loop

1
2
1
2
1
2
1
2
Areas

1
1
2
2
3
3
4
4
Size (mm)

385 x 520 x 110
385 x 520 x 110
385 x 520 x 110
385 x 520 x 110
385 x 700 x 145
385 x 700 x 145
385 x 700 x 145
385 x 700 x 145
# - replace with:
A for Apollo protocol,
H for Hochiki protocol
V for Argus Vega protocol
DS58.02.2011
Page 76
Extinguishant Control Panel
Features
Product Overview
quality controlled environment and with UL and FM approvals,
the Sigma A-XT releasing panel ofers outstanding value and
performance for all small to medium fxed frefghting
installations.
With three initiation circuits as standard, release can be
confgured to activate from any combination of detection zone
inputs to allow (among other combinations) any two from three
type activations such as would be required for detection in
ceiling void, room and foor void applications.
The extensive confguration options of the Sigma A-XT allow the
functionality of the system to be extensively modifed.
The panel contains a large LED display to enable easy
confguration and control which also displays the time
remaining until release for added user safety.
The countdown timer is duplicated on up to seven remote status
units to provide local indication of the system status.
With all of the electronics mounted on a single, easily
removable, steel plate Sigma A-XT panels are both robust and
easy to install.
Sigma A-XT is supplied in an enclosure that matches the design
and color of the Elite RS range and is available in standard red or
optional gray.
UL864 and FM listed
Three initiation circuits as standard
Any single zone or any combinations of
zones can be confgured to release
Confgurable frst stage NAC delays
Confgurable detection delays
Zero time delay upon manual release
option
Compatible with I.S. barriers
Non-latching zone input option to
receive signals from other systems such
as aspirating equipment
Confgurable releasing delays up to 60
seconds in 5 second steps
Confgurable releasing duration up to 5
minutes in 5 second steps
until release
Supports up to seven, four wire status
indicators
Built in Extract Fan control
Programmable
Functions
Access Level 2
Test Zones 1 to 3
Disable Zones 1 to 3
Disable 1st Stage Alarms
Disable Pre-activated 1st Stage Relay
Disable Pre-activated 2nd Stage Relay
Disable Extract Fan Output
Disable Manual Release Input
Disable Releasing Sub System
Activate Extract Fan Output
Activate Alarm Delays
Access Level 3
Sounder Delay
Coincidence Detection
Disable Panel Features
Zone Alarm Delays (Detectors)
Zone Alarm Delay (Call stations)
Confgure Zone for I.S Barrier Use
Zone Short Circuit Alarm
Zone Non Latching
Zone Inputs Delay
Extinguishant Release Time Delay
Extinguishant Release Duration Timer
Extinguishant Reset Delay Timer
Model No. K1810-10
A-XT
Sigma
N
E
W
!
Specifcation
Panels
Construction
Finish
Colour - lid & box
Mains supply
Mains supply fuse
Power supply rating
Battery fuse
R0V output
Sounder outputs
Terminal capacity
NAC rating
Extinguishant output EOL
No. of initiating circuits
No. of NAC circuits
Zone normal threshold
Epoxy powder coated
Red RAL 3002 (optional grey BS 00 A 05 semi-matt)
230V AC or 115V AC
1.6 Amp (F1.6A L250V)
200 millivolts
Two 12 Volt 7Ah sealed lead acid in series
0.7A maximum
20mm, 3.15A glass
3 Amps
0.095A
24V Fused at 500mA with electronic fuse
2mA maximum
12 AWG
Dependent on type (maximum 32)
0.5A per circuit
10K 5% Watt resistor
1N4004 Diode
3
2 x 1st Stage, 1 x 2nd Stage
Fused at 1 Amp
Switched -ve, max resistance 100 Ohms
8K ohms to 1K ohm
99 ohms to 0 ohms
8K ohms to 1K ohm
99 ohms to 0 ohms
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Technical
Product
Code
K1810-12
K1810-13
K1810-44
K1810-43
Description
Surface mounting panel - Red 115V
Surface mounting panel - Red 230V
Surface mounting panel - Grey 115V
Surface mounting panel - Grey 203V
Size (mm)
368 x 310 x 90
368 x 310 x 90
368 x 310 x 90
368 x 310 x 90
DS72.01.2011
Page 78
Extinguishant
Status Indicators
Sigma A-Si
Product Overview
The Sigma A-Si range of status indicators provide detailed status
information for Sigma A-XT releasing control equipment.
All models provide high brightness, LED indication of Manual Only,
Automatic and Manual, Abort operated, Disabled, Imminent and
Released conditions. Models are also available with zonal fre
indicators and a common trouble indicator.
For systems where local control of the Automatic/Manual mode and
or a Manual extinguishant release control are required, units are
available with these controls ftted.
All models have supervised inputs for the remote connection of
Automatic/ Manual mode and abort switches.
All units contain a large, LED display which shows a countdown of
the time remaining until release in seconds.
Abort Switch
Product Overview
The Sigma A-XT Abort switch connects to the Abort terminals of
the Sigma A-XT releasing panel. Any number of Sigma A-XT Abort
switches may be connected to the circuit.
The last switch must have the end of line device from the Abort
circuit terminals of the Sigma A-XT releasing panel ftted across its
connections to provide open and short circuit supervision.
The unit is supplied mounted to a rugged steel enclosure but may
also be fush mounted to a single gang electrical box.
Model No. K1821-19
Model No. K1821-11
Model No. K1821-13 Model No. K1821-15
Model No. K1821-17
Sigma A-Si
Features
UL864 and FM listed
High brightness LEDs
Detailed indication of the status of the
control panel
Supervised data connection
until release
Manual only and Automatic & Manual mode
select keyswitch option
Four wire connection (data and power)
Protected dual action manual release switch
option
Option for zonal fre and trouble indication
with buzzer
Robust, high quality enclosure
Easy access to terminals
Remote Auto/Manual door interlock input
(supervised)
Remote Abort input (supervised)
Internal trouble diagnosis indicators
Model No. K1823-10
A-Si
& Abor t Sw i t c h
Sigma
N
E
W
!
Specifcation
Equipment
Product Code

K1821-11
K1821-41
K1821-12
K1821-42
K1821-13
K1821-43
K1821-14
K1821-44
K1821-15*
K1821-45*
K1821-16*
K1821-46*
K1821-17*
K1821-47*
K1821-18*
K1821-48*
K1821-19*
K1821-49*
K1821-20*
K1821-50*
K1823-10
K1823-40
Description
6 lamp status unit surface mount - red
6 lamp status unit surface mount - gray
6 lamp status unit fush mount - red
6 lamp status unit fush mount - gray
6 lamp status unit with mode select keyswitch surface mount - red
6 lamp status unit with mode select keyswitch surface mount - gray
6 lamp status unit with mode select keyswitch fush mount - red
6 lamp status unit with mode select keyswitch fush mount - gray
6 lamp status unit with manual release surface mount - red
6 lamp status unit with manual release surface mount - gray
6 lamp status unit with manual release fush mount - red
6 lamp status unit with manual release fush mount - gray
6 lamp status unit with mode select keyswitch & manual release surface mount - red
6 lamp status unit with mode select keyswitch & manual release surface mount - gray
6 lamp status unit with mode select keyswitch & manual release fush mount - red
6 lamp status unit with mode select keyswitch & manual release fush mount - gray
10 lamp status unit with mode select keyswitch & manual release surface mount - red
10 lamp status unit with mode select keyswitch & manual release surface mount - gray
10 lamp status unit with mode select keyswitch & manual release fush mount - red
10 lamp status unit with mode select keyswitch & manual release fush mount - gray
Elite Extinguishing Abort switch surface mount - red
Elite Extinguishing Abort switch surface mount - gray
Construction
Colour - lid & box
Power supply
Max. number of status units
Quiescent current
Cable capacity
Monitored inputs end
of line resistor
Monitored inputs trigger threshold
Monitored inputs
Data connection
Red (optional grey)
21 to 30 V DC
0.07A
7
0.033A
2.5mm per terminal
6K8 0.5W Resistor
8K ohm to 1K ohm
99 ohms to 0 ohms
(max 1200 metres)
-
-
-
-
-
-
-
-
-
-
-
-
Sigma A-Si
Technical
DS73.01.2011
* Not UL/FM Listed
Size (mm)
186 x 132 x 50
186 x 132 x 50
186 x 132 x 55
186 x 132 x 55
186 x 132 x 50
186 x 132 x 50
186 x 132 x 55
186 x 132 x 55
186 x 132 x 50
186 x 132 x 50
186 x 132 x 55
186 x 132 x 55
186 x 132 x 50
186 x 132 x 50
186 x 132 x 55
186 x 132 x 55
186 x 132 x 50
186 x 132 x 50
186 x 132 x 55
186 x 132 x 55
98 x 98 x 59
98 x 98 x 59
Trouble
Released
Imminent
Disabled
Abort Activated
Auto/Manual
Manual Only
Fire Zone 3
Fire Zone 2
Fire Zone 1
Construction
Colour
Switch rating
Trigger resist
End of line resistor
Red (optional grey)
1A at 30V DC
470R 1W
6K8 1/2 W
-
-
-
-
-
Abort Switch
Technical
Page 80
Extinguishant
Ancillary PCB
R
S
4
8
5
2
4
V

D
C
I
N
O
U
T
M
O
D
E
A
B
O
R
T
Status
PCB
6K8
6K8
470R
470R
A-XT
Anc i l l ar y PCB
Sigma
N
E
W
!
Ancillary PCB
Product Overview
The Sigma A-XT Ancillary Board is compatible with all Sigma A-XT
control panels.
The board provides volt free normally open contacts allowing
control of sub-systems and plant remotely from the main panel over
a two wire data bus.
Ancillary boards require only a two core data cable from the main
control panel and a two core power cable from the main panel.
Up to 7 Ancillary boards can be connected to a control panel and
each is allocated an address from 1 to 7 using a binary coded DIL
switch. The total length of the data cable from the main panel to the
last repeater must not exceed 4000 feet.
A mixture of status units and Ancillary boards, up to a maximum of 7
of each type, can be connected to the serial data bus.
Ancillary PCB
Features
UL864 and FM listed
Up to 7 per system
Volt free relay outputs for fre and releasing
system status

Relay operated LED indicators
Model No. K1822
Equipment
Product Code

K1822-00
K1822-10
K1822-40
Description
Sigma A-XT Ancillary Board
with cabinet - red
with cabinet - gray
Size (mm)
155 x 136
385 x 310 x 90
385 x 310 x 90
Colour - lid & box
Supply voltage
Contact ratings
Cable capacity
Operating humidity
Red (optional grey)
20-30V DC
30V DC 1 Amp
2.5mm per terminal
-5C to +50C
-
-
-
-
-
-
-
Ancillary PCB
Technical
Specifcation
DS74.01.2011
ADDRESS
PROCESSOR
RESET
FUSE
FAIL OK Z1 Z2 Z3 MAN DISAB REL ACT EXTR HOLD
MAN
REL
- +
24V
DC
24V
DC
- + - +
PF Z1
FIRE
Z2
FIRE
Z3
FIRE
MAN
MODE
DISAB REL ACT HOLD EXTR MAN
REL
- +
RS485
OUT
RS485
IN
System Status
and Control
System Status
and Control
System Status
and Control
Sigma A-XT Control Panel
Detection Zone 1
Detection Zone 2
Detection Zone 3
1
s
t

S
t
a
g
e

S
o
u
n
d
e
r
s
2
n
d

S
t
a
g
e

S
o
u
n
d
e
r
s
H
o
l
d
M
a
n
u
a
l

R
e
l
e
a
s
e
D
o
o
r

I
n
t
e
r
l
o
c
k
4 Core
Ancillary
Board
Ancillary
Board
BMS
Interface
Addressable
House Fire Alarm
Activate Extinguisher
Released Pressure Switch
Low Pressure Switch
4 Core
Example System Schematic
Power Supplies
Pages 84-88
C
O
M
I N
G
S
O
O
N
Power Supplies
Pages 84-88
PSU
EN54-4 Approved Fire Alarm
Power Supplies
Page 84-85
PSU
EN54-4 Approved Switched Mode
Power Supply / Charger
Page 86-87
PSU
EN54-4 Compliant 10.25 Amp
Power Supply
Page 88
Page 84
EN54-4 Approved
Fire Alarm Power Supplies
Features
Product Overview
Syncro Power fully certifed to EN54-4 power supplies provide a
stable and fully regulated, true 24V output for fre alarm system
applications under all power conditions.
The unique regulation techniques ensure that even when
running on standby batteries, a stable 24V supply is available
to all parts of the system ensuring that all 24V powered devices
connected are supplied with optimum power.
The powerful onboard micocontroller ensures that all battery
types are conditioned with optimum, temperature compensated
charging algorythms to maximise battery life and maintain
batteries in top condition.
Syncro Power EN54-4 compliant power supplies can be ftted
with an optional dual fused output monitoring module to
ensure compliance with European standards when supplying
fre control panels with an external power supply.
Enclosed units are available to match both Sigma and Syncro
equipment ranges and all are fnished with matching livery and
provide power on and power fault indications.
Optional dual output path (KD) variant available, to provide
two independent supply paths between the power supply unit
and the control panel in accordance with EN54-4 clause 6.4 and
BS5839 pt1, clause 12.2.2.m requirements.
2.5A and 5.25A versions
Chassis only or enclosure mounted with
battery space
110V or 230V input
Regulated, true 24V output
Intelligent battery charging and temperature
compensation
House up to 26Ah batteries
Status indicators for monitored faults
Dual output option for powering fre alarm
control panels remotely
Chassis versions have same mounting points
Fully enclosed and robust construction
Boxed Power Supply
to match Syncro Style
Boxed Power Supply
to match Sigma CP
and Syncro AS Style
PSU
BS- EN54- 4
KM 73505
Specifcation
Construction
Finish
colour - lid & box
Mains input supply voltage
Mains supply fuse
Load output voltage
Maximum load current
K25400 models
Maximum load current
K25250 models
Maximum ripple
Load fuse
from batteries
Battery charge output voltage
Deep discharge prevention
Compatible batteries
Common fault output
Battery disconnected output
Battery low output
Charger fault output
Earth fault output
Mains failed output
Fault output connector
Mains connector
Load connector
Battery connector
Front panel Power On indicator
Front panel Fault indicator
Power output
1.2 mild sheet steel
Epoxy powder coated
230V AC 50/60Hz or 110V AC 50/60Hz (link selectable)
250V, 3A, SB, 5mm X 20mm
19- 30V DC +/- 1%
5.25 Amps continuous with maximum battery charge output of
1.25A
2.5 Amps continuous with maximum battery charge output of 1.0A
200 milliamps
5 Amp, self resetting Polyfuse
5 Amps
27.4V DC nominal at 20 degrees C
(temperature compensated from -5 to 45 degrees C
Two stage, constant voltage. 1.25 Amps maximum
Battery disconnects at 19V
Yuasa NP7-12, NP12-12, NP17-12, NP24-12
Powersonic PS-1270, PS-12120, PS-12170, PS12260
-5 to 45 degrees C
Normally energised volt free changeover relay 30V DC 1 Amp
Open collector 50 milliamps
14 way DIL header 0.1 spacing
3 way terminal, 7.62mm spacing, 2.5mm maximum cable size
Green LED
Yellow LED
Dual 24V supply terminals with EN54-4 clause 6.4 interface
(when ftted with optional dual fused output monitoring module)
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Technical
Size (mm)
365 x 310 x 90
385 x 520 x 110
500 x 355 x 117
385 x 520 x 110
500 x 355 x 117
500 x 460 x 190
365 x 310 x 90
385 x 520 x 110
500 x 355 x 117
385 x 520 x 110
500 x 355 x 117
500 x 460 x 117
Panels
Product Code
K25250M2
K25250M3
K2525003
K25400M3
K2540003
K2540015
KD25250M2
KD25250M3
KD2525003
KD25400M3
KD2540003
KD2540015
PSU
2.5 Amp
2.5 Amp
2.5 Amp
5.25 Amp
5.25 Amp
5.25 Amp
2.5 Amp
2.5 Amp
2.5 Amp
5.25 Amp
5.25 Amp
5.25 Amp
Batteries
up to 7Ah
up to 12Ah
up to 12Ah
up to 17.2Ah
up to 12Ah
up to 26Ah
up to 7Ah
up to 12Ah
up to 12Ah
up to 17.2Ah
up to 12Ah
up to 26Ah
DS61.04.2011
With Dual Output Board
Page 86
EN54-4 Approved Switched
Mode Power Supply/Charger
S406
Features
Product Overview
The S407/S406 power supply/battery charger has been
developed using switched mode technology to produce an
efcient and lightweight power unit for a host of fre alarm
applications.
Suited to almost any application, the S407/S406 is designed
to be a universal power source which will reduce spares stock
holding and increase serviceability of systems.
The comprehensive monitoring features of the S407/S406
include true battery present detection, low battery voltage
warning, battery overcharge warning, high battery impedance
monitoring and low battery shut of.
These features combined with the temperature compensated
charger output will increase the service life of sealed lead acid
batteries.
Fully enclosed construction
Small & lightweight
True 5.25 Amp continuous output
Comprehensive fault monitoring
Microprocessor controlled
Temperature compensated charger
Wide input supply voltage
Low battery shut of to prevent
deep discharge of battery
S407
Features
Fully enclosed construction
Small & lightweight
True 2.5 Amp continuous output
Comprehensive fault monitoring
Temperature compensated charger
Wide input supply voltage
Low battery shut of to prevent deep
discharge of battery
S407 - 2.5 Amp PSU
BS- EN54- 4
KM 73505
PSU
S406 - 5.25 Amp PSU
Specifcation
Construction
Finish
Colour
Size
Weight
Supply voltage
Output voltage
Total output current
Load current
Fault outputs rating
Mains fuse
Load fuses
Mains failed warning
Battery disconnected warning
Battery low warning
Battery overcharge warning
Earth fault warning
Common fault output
Aluminium base - sheet steel cover
Epoxy powder coated
Black
226mm x 120mm x 55mm
0.9Kg
230V AC (+10%/-15%)
27.5V DC (temperature compensated)
5.25 Amps (continuous)
1.25 Amps max.
4.0 Amps (with fat battery)
50mA max.
3 Amp 20mm HRC
5 Amp (self resetting)
Switched -ve output
Switched -ve output
Switched -ve output
Switched -ve output
Switched -ve output
Switched -ve output
-5 to +50 deg. C
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
S406
Technical
Formula
C min

Where:
C min

T
1

I
1

I
2

D
1.25 (T
1
I
1
+ D I
2
/2)

Minimum capacity of the battery when new at the
20 hour discharge rate and at 20 C in ampere-hours;
Total battery stand by period in hours;
Total battery stand by load in amperes;
Total battery alarm load in amperes;
a de-rating factor. (1.75)
Battery Calculation
BS 5839-1:2002
=

=

=
=
=
=
DS19.09.2011
Construction
Finish
Colour
Size
Weight
Supply voltage
Output voltage
Load current
Mains fuse
Load fuses
Battery disconnected warning
Battery low warning
Battery overcharge warning
Earth fault warning
Common fault output
Aluminium base - sheet steel cover
Epoxy powder coated
Black
226mm x 120mm x 55mm
0.9Kg
230V AC (+10%/-15%)
27.5V DC (temperature compensated)
3.5 Amps (continuous)
1.25 Amps max.
2.5 Amps (with fat battery)
50mA max.
3 Amp 20mm HRC
3 Amp (self resetting)
Switched -ve output
Switched -ve output
Switched -ve output
Switched -ve output
Switched -ve output
Switched -ve output
-5 to +50 deg. C
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
S407
Technical
Page 88
Boxed Power Supply
to match Syncro Style
PSU
C
O
M
I
N
G
S
O
O
N
EN54-4 Compliant
10.25 Amp Power Supply
Features
Product Overview
The S408 is an EN54-4 compliant, universal input switching
power supply capable of delivering a full 290W of continuous
power for fre alarm systems.
Suitable for charging a range of sealed lead acid batteries from
7Ah to 45Ah, the S408 power supply features complete monitor-
ing of primary and secondary power sources with fully tempera-
ture compensated battery charging and battery high impedance
monitoring.
The S408 power supplies are available as chassis only units or
mounted in a range of enclosures suitable for various sizes of
battery.
Continuous 8A load output while charging
fully depleted batteries
Charges up to 45Ah batteries
94V to 253V AC input
Mains fail monitoring with LED indication
and output
Battery disconnection monitoring with LED
indication and output
Low battery monitoring with LED indication
and output
Earth fault monitoring with LED indication
and output
Low battery cut out
Temperature compensated battery charging
Lightweight construction
Panels
Product Code
S408 (Chassis only)
K25800M3
K2580003
K2580015
K25800D3
KD25800M3*
KD2580003*
KD2580015*
KD25800D3*
Batteries
N/A
Up to 17Ah
Up to 17Ah
Up to 45Ah
Up to 45Ah
Up to 17Ah
Up to 17Ah
Up to 45Ah
Up to 45Ah
Construction
Finish
Colour
Input voltage
Output voltage
Load current
Mains fuse
Load fuses
Battery disconnected
warning
Battery low warning
Battery overcharge
warning
Earth fault warning
Common fault output
Epoxy powder coated
BS 00 A 05 grey -
fne texture
94 to 253V AC 50/60 Hz
24V DC
10.25A
2.25A
8.0A (with fat battery)
50mA max.
5A 20mm HRC
10A (self resetting)
Switched -ve output
Switched -ve output
Switched -ve output
Switched -ve output
Switched -ve output
Switched -ve output
-5 to +50 deg. C
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Technical
DS67.02.2011
*With Dual Output Board
Size (mm)
120 x 260 x 65
385 x 520 x 110
500 x 355 x 117
500 x 460 x 190
385 x 520 x 200
385 x 520 x 110
500 x 355 x 117
500 x 460 x 190
385 x 520 x 200
A new era in life safety alarm management
Come and join us on our Journey
All New Control Systems
Innovative Annunciator ranges
Market leading data storage and access facilities
Unique system management tools
Power, Intelligence......
with a sense of feeling
Miscellaneous
Items
Pages 92-101
Remote Indicator
Remote Fire Detector Indicator
Units
Page 96-97
Audio Visual
Audible and Visual Indicator Units
Page 98
N
EW
!
N
EW
!
N
EW
!
Miscellaneous
Items
Pages 92-101
Sigma DocBox
Document Enclosure
Page 92
Warning Signs
Illuminated signs using
high intensity LED indicators
Page 94-95
Realy Boards
Single (RL1) and Four (RL4) Way
Relay PCB
Page 99
Hydrosense
Water Detection System
Page 100-101
Vision Window
Tamper Resistant Vision Window
Page 93
Page 92
Sigma Doc Box
DS42.04.2011
Features
Product Overview
Another addition to the Kentec range, the document box is
designed to complement the design & colour of the Sigma CP
range of control panels. The standard version Document Box will
hold up to 50 A4 sheets of information on the Fire Detection or
other security systems within a premises. The deep version will
hold up to 100 sheets. The Doc Box also doubles up as a Key
Box providing 7 easily accessible formed key hooks inside the
enclosure.
Matches design & colour scheme for
standard Sigma CP/XT & Syncro AS
control panel ranges
Easy to install
Key Lockable
Designed for versatility
Choice of small or large capacity
enclosure
Part Number
Size
Part Number
Size
Construction
Finish
Colour - lid &
box
Weight
K16000L2 (Standard version)
385mm(W) x 310mm(H) x
60mm(D)
K16000M2 (Deep version)
385mm(W) x 310mm(H) x
90mm(D)
Epoxy powder coated
3.0Kg
-
-
-
-
-
-
-
-
Technical
Internal VIew
Model No. K16000L2
Doc Box
Sigma
Product code: K18002
Retroft Tamper Resistant
Vision Window
DS56.03.2011
Features
Product Overview
The Tamper Resistant Vision Window is perfect for public areas
where restricted access is necessary to prevent damage and
unauthorised operation of the control panel. The cover fea-
tures a fully welded steel construction and key lockable inner
door making it robust and secure.
The Vision Window is available from stock, fully assembled, and
can be ftted on site in minutes by simply taking out the hinge
pins on the existing enclosure, removing the lid before ftting
the new Vision Window cover and hinge pins.
Control panels can also be supplied pre-ftted with the Vision
Window. This applies to any M2 size Sigma CP, Sigma CPA,
Sigma CP-R, Sigma XT, Sigma A-XT or Syncro AS
control panels. Please contact our sales department for prices.
2 minutes to ft on site

Kit available from stock
Colour to match standard Control Panel
ranges
Special colours available on request
Fits any M2 sized Sigma CP, Sigma CP-R,
Sigma XT or Syncro AS panel

Attractive design
Key lockable
Product code
Size
Construction
Finish
Colour - lid & box
Colour - controls
plate & labels
Weight
K18002
385mm(W) x 310mm(H) x 35mm(D)
Epoxy powder coated
2.0 Kg
-
-
-
-
-
-
-
Technical
Fit the Vision Window, then re-ft both hinge pins
Take out both hinge pins & remove lid
Tamper Resi st ant
Vi si on Wi ndow
Page 94
Illuminated signs using
high intensity LED indicators
Features
Product Overview
The new range of illuminated warning signs employ the very
latest in LED technology to provide a high reliability, high
brightness, audio/ visual warning indication unit.
The brightness of the sign remains constant over its entire
operating range of 15 to 30 volts DC due to the unique power
boost circuitry employed. This ensures that even with a system
running on depleted batteries, all signs remain at full intensity.
A range of standard text signs are available and customised
text and languages are easily accommodated due to the
unique method employed to apply the lettering.
The split level design allows one message to be displayed
in the top half of the sign and an additional message to be
displayed in the bottom half of the sign allowing for two stage
warnings for systems such as extinguishing protection systems.
The signs are now also available in split colours. Red, green
or yellow acrylic can be mounted in the top section and the
bottom section in any confguration. Text can be printed in
black or alternatively can be reversed so the letters appear in
the colour of the acrylic.
High brightness white LED indicators for
reliability and low power consumption
Standard or easily customisable wording
and language variants
Split level function - allows top half and
bottom half of sign to be illuminated
independently with no light spillage
between halves
Internal buzzer with disable and external
silence facility
Available in red illuminated or yellow
illuminated as standard, other colours
available on request
Connects to standard fre alarm sounder
circuits
Two wire 2 - stage (top half/ bottom half )
voltage reversing input provided
Voltage reversing, silenceable sounder
output provided
Model No. K27102
Split level function
War ni ng
Si gns
N
E
W
!
Specifcation
DS64.03.2011
Construction
Finish
Colour - lid & box
Power Consumption
Operating humidity
Operating Voltage
-
-
-
-
-
-
-
Technical
Panels
Product Code
K27102
K27101
K27202
X2710
X2720
X2730
Description
Illuminated sign -
FIRE ALARM DO NOT ENTER
Illuminated sign -
FIRE ALARM EVACUATE AREA
Illuminated sign -
EXTINGUISHANT SYSTEM ACTIVATED
Special Designation (specify text)
Epoxy powder coated
140 milliamps max at 24V DC
-5C to +50C
To 95% non-condensing
-15 to 30V DC
Colour
Red on black
Red on black
Black on yellow
Red on black
Black on yellow
Black on green
ON
LEV1 FLASH
LEV2 FLASH
SING/DUAL
DISABLE BUZZ
ENABLE SILENCE
2 WIRE
CONTROL
3 WIRE
CONTROL
SILENCE
BUTTON
MOUNTED
REMOTELY
C
O
M
M
O
N

+
2
4
V
S
W
I
T
C
H
E
D

-
V
E

S
T
A
G
E

1
V
O
L
T
A
G
E

R
E
V
E
R
S
I
N
G

I
N
P
U
T

+

T
O

-
V
O
L
T
A
G
E

R
E
V
E
R
S
I
N
G

I
N
P
U
T

-

T
O

+
C
O
M
M

+
L
E
V

1
L
E
V

2
2 WIRE
I/P
SILENCE
TO ADDITIONAL
SIGNS OR
SOUNDERS
SOUNDER
OUTPUT
C
O
M
M
O
N

+
2
4
V
S
W
I
T
C
H
E
D

-
V
E

S
T
A
G
E

1
S
W
I
T
C
H
E
D

-
V
E

S
T
A
G
E

2
C
O
M
M

+
L
E
V

1
L
E
V

2
2 WIRE
O/P
SOUNDER
Size (mm)
300 x 195 x 50
300 x 195 x 50
300 x 195 x 50
300 x 195 x 50
300 x 195 x 50
300 x 195 x 50
For dual background versions, contact sales on +44 (0) 1322 222121
Model No. K27102
Special designations example
ALARMA DE INCENDIOS
NO ENTRAR
EXTINGUISHANT
RELEASE
SYSTEM NORMAL
ENTER
DO NOT ENTER
Special designations example
Dual background example
Page 96
Remote Fire Detector
Indicator Units
Features
Product Overview
The K24000 Remote Indicator LED Units allow the LED
associated with a fre detector to be extended to a visible
location in areas where the detector itself is concealed.
Two bright, alternately fashing LED indicators with wide angle
difusers ensure that the indicators are immediately visible in
any sized room.
Special ceiling mounting clip available.
Fixing screws supplied with each unit.
The round version fts into a BESA box and the square version
fts into a standard electrical single gang back box.
Connections for both conventional and addressable detectors.
High brightness red LED indicators for
reliability and low power consumption
Wide viewing angle
LEDs fash alternately to easily attract
attention
Units to ft to standard gang or round
electrical back boxes
Compatible with conventional and
addressable detectors
Printed with FIRE ALARM IN CONCEALED
SPACE as standard
Custom printing and languages available
on request
Model No. K24001 Model No. K24000
Remot e
I ndi c at or Uni t
N
E
W
!
Ceiling Mounting Clip
Product Overview
Our new and unique ceiling mounting clip provides fast and
secure fxing of our round Remote Indicator unit to ceilings.
Particularly good for fragile ceilings such as suspended ceil-
ings.
Specifcation
Construction
Finish
Colour
Current Consumption
Operating humidity
Voltage
Epoxy powder coated
White
20 milliamps max at 24V DC
-5C to +50C
15 to 30V DC
-
-
-
-
-
-
-
Panels
Product Code
K24000
K24001
M24000
Description
Round Remote Indicator
Square Remote Indicator
Ceiling Mounting Clip
(fts Round Remote Indicator only)
Technical
DS68.02.2011
Always refer to the detector manufacturers detector base instructions before
connecting the K24000 Remote Indicator Unit and only use the connections described.
Remote indicators that are not connected as per the instructions may cause the detector
to be inoperative.
Connection Details
+
+
A
-
100R
1K
Detector + Supply
Addressable Detector
Remote Indicator
Output
Conventional Detector
Remote Indicator
Output
Flashing
Red LEDs
Ceiling Mounting Clip M24000*
Fixing Details
A
A
B
B
C C
D D
1. Make a hole in the ceiling using the most
suitable method below:
a) Using a standard 64mm diameter hole saw.
b) Use an open ended saw to cut a 62mm X
28mm slot.
c) If fxing to a ceiling tile, gently push the clip
through the tile and use a stanley knife to
cut between points C and D (both sides).
2. Fold back the two tabs marked A into position B,
locking the ceiling clip into position.
3. Use the 2 self tapping screws provided to ft the
Remote Lamp plate.
* Fits Round Remote Indicator Only (K24000)
Size (mm)
85 x 85 x 30
85 x 85 x 30
85 x 85 x 30
Page 98
Audible and visual indicator units
Providing remote indication of the
status of the fre alarm system
Features
Product Overview
A range of indicator units with either red or yellow indicators to
provide audible and visual status of alarms, isolations or other
functions associated with the fre alarm or other systems.
These units are available with a keyswitch to silence the internal
buzzer or a keyswitch to illuminate the indicator and buzzer and
provide a volt free contact for ancillary control functions when the
keyswitch is operated.
All units mount to a UK style, single gang back box or can mount
to standard surface or fush single gang mounting boxes.
Available with red or yellow high brightness,
fashing LED indicators
Can be used for Fire alarm warning, activated
by a sounder circuit or to indicate and initiate
an active isolation
Optional silence buzzer keyswitch
Disable buzzer option via internal jumper link
Optional keyswitch to perform isolation
Terminations for incoming and outgoing
wiring
Fits onto standard, single gang UK back box for
fush mounting (use M10FCLGT)
Surface mounting box supplied
Construction
Finish
Colour - lid & box
Voltage
Power Consumption
Operating humidity
-
-
-
-
-
-
-
Technical
Epoxy powder coated
18 to 30 V DC
25 milliamps at 24V
-5C to +50C
To 95% non-condensing
DS63.03.2011
Model No. K24210-M10
Model No. K24110-M10
Panels
Product
Code
K24100-M10
K24110-M10
K24200-M10
K24210-M10
M10FCLGT
Description
Red Fire alarm indicator
Red Fire alarm indicator with buzzer
silence keyswitch
Yellow alarm indicator
Yellow alarm indicator with control
keyswitch
Flush Mounting Collar
(will ft single gang deep fush back box)
Size (mm)
97 x 97 x 48
97 x 97 x 48
97 x 97 x 48
97 x 97 x 48
Audi o
Vi sual
N
E
W
!
Single (RL1) and Four (RL4)
Way Relay PCB
Features
K375 - RL1 Single Way Relay PCB
Product Overview
This simple board contains a single 24V DC relay, which can be
used for any extra low voltage switching applications.
It has two changeover contacts, an LED indicator to show when
the coil is energised and a polarising diode to prevent damage
to the power source by reverse polarity connection.

The contacts are suitable for switching a maximum of 30V DC
and 2 Amps. Voltages or currents that exceed these values
should not be connected under any circumstances.

The current consumption of the unit when operated from a
24V supply is approximately 25mA.

The PCB has four 4mm mounting holes, which will accept
the self adhesive standofs supplied. The use of self adhesive
standofs should be carefully considered however due to their
tendency to become detached over a period of time and a
more permanent fxing method is recommended.
24V DC operated
LED indicator shows relay operated
Two changeover contacts per relay
Built in suppression diodes
Spring leaf 2.5mm capacity terminals
Small footprint
2 Amp 30V DC contact rating
Low current consumption
DS26.03.2011
K376 - RL4 Four Way Relay PCB
Product Overview
This simple board contains four 24V DC relays, which can be
used for any extra low voltage switching applications.

Each relay has two changeover contacts, and an LED indicator
to show when the coil is energised. The coils of the relays are
commoned to the positive supply and the relays can be
operated individually by switching a negative to the numbered
coil inputs.

The contacts are suitable for switching a maximum of 30V DC
and 2 Amps. Voltages or currents that exceed these values
should not be connected under any circumstances.

The current consumption of the unit when operated from a
24V supply is approximately 25mA per relay.

The PCB has four 4mm mounting holes, which will accept
the self adhesive standofs supplied. The use of self adhesive
standofs should be carefully considered however due to their
tendency to become detached over a period of time and a
more permanent fxing method is recommended.
RL4- Four Way Relay
PCB (K376)
RL1- Single Way Relay
PCB (K375)
Example sounder interface
of two K3000S re panels
R
4
R
3 R
2
R
1
D
4
D
3
D
2
D
1
S
E
R
IA
L
N
U
M
B
E
R
RELAY 4 RELAY 3 RELAY 2 RELAY 1
NO C NC 4 NO C NC 3 NO C NC 2 NO C NC 1
L
K
1
R
E
L
A
Y
2
R
E
L
A
Y
1
NO
C
NC
NO
C
NC
R
E
L
A
Y
4
R
E
L
A
Y
3
NO
C
NC
NO
C
NC
RL4 RL3 RL2
RL1
X1
L4 L3 L2 L1
RL4
CONTACT 2 CONTACT 1 COIL
C NC NO NO C NC
CONTACT
ALARM
INPUT
ALARM S2 S1
0V AL NO C NC
RL1
L1
CONTACT 2 CONTACT 1 COIL
NO C NC NO C NC
CONTACT
ALARM
INPUT
ALARM S2 S1
0V AL NO C NC
RL1
L1
Rel ay
Boar ds
Page 100
Hydrosense
Water Detection System
System Features
System Overview
A Hydrosense Water Detection System installed in vulnerable areas
will continuously monitor the potential hazards around the clock, year
in year out.
The Hydrosense system has a range of attractive and unobtrusive
control panels containing the alarm circuitry, power supply and has
the facility for 24 hour battery standby.
A Hydrosense System has two methods of leak or moisture
detection, Linear or Point detection.
Linear detection is provided by Hydrowire moisture sensitive cables
which are connected to the control panel via a special
Connection Box, by simple two core leader cable making
installation quick and inexpensive.
Point detection is provided by Floor or Drip Tray Probes also
connected to the control panel by simple two core leader cable.
The Hydrowire and Probes are continuously monitored. Any
disconnection or fault is immediately indicated on the control panel.
All monitoring indicators can be repeated to remote repeater panels
or via volt free contacts to a BMS.
Hydrosense Floor and Drip Tray Mounting Probes
The Floor Probe is simply fxed to the foor and adjusted to give the
required detection level and connected to the control panel via a
simple junction box.
The Drip Tray Probe has exactly the same facilities as the foor mount-
ing probe but has a bracket for mounting onto the side of an ACU drip
tray.
Hydrowire
Available as standard 5 and 10 metre lengths pre-terminated with DIN
plugs, Hydrowire is a fexible cable which will continuously monitor
large areas. When even a small amount of water or
moisture comes into contact with Hydrowire it will trigger an alarm.
Hydrowire will dry out in around 20 minutes for use again. Each zone
requires a junction box and an end of line plug.
Hydr oSense
Linear detection with Hydrowire
Point detection with probes
Zonal repeat contacts
Easy to install
Easy to service and maintain
Auxillary alarm contacts
Monitored alarm outputs
Battery backup
Remote monitoring
Model No. HSCP-S-8
Control Panels
Two types of control panel are available. The
Hydrosense HSCP is available in 2, 4 and 8 Zone
confgurations and the Hydrosense K200000 range
for 12 Zones or greater. Flush versions and special
fnishes are also available.
Repeater panels and ancillary PCBs are available to
provide common alarm, common fault, coinci-
dence and zonal alarm, VFCs allowing control of
sub-systems, graphical mimics and plant, remotely
from the main panel over a two wire data bus.
Model No. K2024005
St ar Lane, Great Wakering
Essex, SS3 0PJ. England
Tel: + 44 (0)1702 216999
Fax: + 44 (0)1702 216699
Email: [email protected]
Web: www.vimpex.co.uk
Specifcation
Equipment
Product Code
K2012003
K2016005
K2024005
HSCP-S-2
HSCP-S-4
HSCP-S-8
HSCPR-S-2
HSCPR-S-4
HSCPR-S-8
K2101
K2102
K2103
K2104
K2105
K2106
K2110
K2111
K2112
S 9615/A
F/A/1W
Description
2 zone Control Panel
2 zone Repeater Panel
Floor mounted probe
Drip tray probe
Remote indicator
5 metre Hydrowire
10 metre Hydrowire
Hydrowire connection box
End of line plug
Leader cable 50M
Fixing clips (100)
Protection Cage for Floor Mounted Probe
Fire-Cryer with water leakage alarm
Size
Indicator
Connection
Material
95mm (max.) 80mm (min.)H x
45mmD x 100mmW
Green LED
4 pin din fying lead (1 metre)
Black nylon
-
-
-
-
Hydrosense Probes
Technical
Larger control panels are available on request
DS03.14.2011
Model No. K2101
Fully compliant with & tested to BS EN54-2 and BS EN54-4
Available in 2, 4 or 8 zones
2 wire repeaters and ancillary boards
Fully programmable using simple menu options
For more Features, Product Overview and Technical details
see Sigma CP page 48 and Sigma CP-R page 52
HSCP Control Panel
Features
12 - 48 zones as standard, more available on request
Common fre and fault contacts
Remote signal contact and isolate
Zonal one man test
see Series 3000 page 56
K200000 Control Panel
Features
Available in a range of standard enclosures to suit any
application
Bespoke sized units can be made upon request
see Sigma Matrix page 60
Matrix Control Panel
Features
Custom
Engineered
Solutions
Pages 104-109
Custom
Engineered
Solutions
Pages 104-109
The Custom Specialists
Our In-house Facilities
Page 104-105
Custom Engineered Solutions
Page 106-109
Page 104
From the initial design process

To sheet metal fabrication
To painting and printing

To panel construction
We have full control at every stage allowing us to ofer industry leading delivery times and
with quality you can have confdence in.
The Custom Specialists
Our in-house Facilities
Cust om
One of the key areas of our business is the design and manufac-
ture of bespoke equipment. Kentec has considerable expertise
in this feld with over 25 years experience, so you can be certain
that all custom engineered product will be designed and built
in accordance with your exact requirements and our strict ISO
9001 approved quality procedures.
Many in-house facilities are at our disposal:
Specifcation
All custom built equipment is project managed by our
engineering department, using the latest software to produce
electrical, mechanical and construction drawings to the customers
specifcations.
We have a dedicated
area for the
construction of
bespoke product and
this was enlarged in
the frst quarter of
2011 to allow us to
increase our capacity
and ofer better
service to our
customers
including factory acceptance testing. Our skilled and dedicated production engineers build
each bespoke product to very high standards and to specifcations driven by our customers.
Page 106
Custom Engineered
Solutions
Facilities
Expert design advice
Mechanical engineering design
Artwork and printing design
Documentation
Electrical engineering
Electronic engineering
Sheet metal fabrication
Powder coat fnishing
Metal fnishing
Silk screen printing
Wire looming
Electrical safety testing
Technical support
Geographical foor plan
with LED indications.
Analogue
Addressable
fre control panel
with plant controls.
Floor standing fre
detection control panel
with geographical foor
plan & plant controls.
Cust om
Specifcation
Unit is then assembled, fully tested and
dispatched to address of your choosing!
Firemans Override
AUTO
OFF
ON
GENERATOR
FAULT
LWR. GRD. SMOKE
CLEAR ASSIST
AUTO SHUT
SHUT
GAS VALVE
AUTO
OFF
ON
CLEAR ASSIST
AUTO AUTO
OFF
ON
STAIR
PRESSURISATION
BUILDING SMOKE ATRIUM LOUVRE
OPEN
WARNING
ENCLOSED WITHIN
240V AC
SHUT
OPEN
OPEN
Dwg. No:
DATE:
CLIENT:
R.NOTE:
CHK. BY
DWN. BY
REV: SCALE:
S.P.
1:1 01
PM
BLUE
TRIANGLE
1.2.06
R31611/1
K7903-02
Detailed electrical schematic diagrams are
produced for production and record purposes
Silk screen artworks are generated
in house for use in our printing shop
From Concept . . . .
. . . . To Product
Conceptual drawing produced
and sent to client for approval
On approval, parts are
engineered & sent to
sheet metal shop for
fabrication before
going to paint shop
(choice of fnishes)
Special Firemans Control Panel
DS38.03.2009
REV REVSON REL/C NOTE DATE
01 RELEASE
TTLE:
CLENT:
DATE DRAWN
W/O No.
DRAWN BY CHECKED BY
PSU/BATT DRG No.
R31611/2
Various
06/02/2006
06/02/2006
N/A K7903-04
'FREMAN'S OVERRDE' CONTROL PANEL
~ nternal Circuit Wiring.
Contact 1
02 03
com on
04
auto
06 07
com on
09
auto
10 11
com on
12
auto
Off
On
Lwr. Grd. Smoke
Clear Assist
Auto
Off
On
Stair
Pressurisation
Auto
13 14
com on
16
auto
17 18
com on
20
auto
Off
On
Building Smoke
Clear Assist
Auto Open
Atrium Louvre
Open
Auto
21 22
com open
23
auto
Shut
Gas Valve
Shut
Auto
101 102
com shut
103
auto
93 94
+v -v
Open
LED
201 202
+v -v
203 204
+v -v
Shut
LED
Generator Fault
LED
Contact 2 Contact 3
240Vac 24Vdc 24Vdc
NOTE: Termination Numbers are NOT consecutive.
[numbers match that of existing equipment]
Lwr. Grd. Smoke
Clear Assist
Building Smoke
Clear Assist
Atrium Louvre
Open
Gas Valve
Shut
Stair Pressurisation
E E E
= use 'end stop' as divider
Off
On
Stair
Pressurisation
Auto
Off
On
Lwr. Grd. Smoke
Clear Assist
Auto Shut
Gas Valve
Shut
Auto
Off
On
Building Smoke
Clear Assist
Auto Open
Atrium Louvre
Open
Auto
Shut
*24Vdc*
Open
*240Vac*
Generator
Fault
TEST:
Switches .
Check continuity of all switch positions at the respective DN terminals .
a) Stair Pressurisation ~
Contact 1 T02/03 = 'closed' in AUTO only; T02/04 = 'closed' in ON only.
b) Lwr Gnd Smoke Assist ~
Contact = T13/14 = 'closed' in AUTO only; T13/16 = 'closed' in ON only.
c) Building Smoke Assist ~
Contact = T17/18 = 'closed' in AUTO only; T17/20 = 'closed' in ON only.
d) Atrium Louvre Open ~
Contact = T21/22 = 'closed' in AUTO only; T21/23 = 'closed' in OPEN only.
e) Gas Valve Shut ~
Contact = T101/102 = 'closed' in AUTO only; T101/103 = 'closed' in SHUT only.
LED's ...
a) apply 24Vdc to T201[+v]/202[-v] ~ 'SHUT' LED shall illuminate.
b) apply 24Vdc to T203[+v]/204[-v] ~ 'GENERATOR FAULT' LED shall illuminate.
c) apply 240Vac to T93/94 ~ 'OPEN' LED shall illuminate.
CONSTRUCTION:
Mount length of DN rail c/w terminals across the width of the internal chassis plate ..
ENSURE TERMNALS DO NOT CLASH WTH FRONT PANEL EQUPMENT.
Mount Rotary Switches & LED's to the front panel .
NOTE VOLTAGES ON GREEN LED's.
Wire all switches & LED's to DN terminals as detailed ~ use 32/0.2 mm2.
Wire Earth terminals to enclosure earth studs & ensure that lid, box, chassis &
terminals are all bonded together.
Fit 240Vac Warning Labels to the rear of door & to chassis plate.
Fit Lockable Vision Window to overall enclosure.
DRAWING No.
PROJECT:
CLIENT:
REV
DWN BY: CHK BY: SCALE: DATE:
REV REVISION REL/C.NOTE No. DATE
W/O No.
NOTES:
CL
N
D4
WELD & FULLY CLEAN CORNERS, SURFACE TO BE FLAT, SMOOTH & SQUARE BEFORE FINISHING
UNLESS OTHERWISE STATED ALL DIMENSIONS
IN MILLIMETRES, TOLERANCES AS FOLLOWS:
x.x = +- 0.3
x.xx = +- 0.05
E
CL
L L
L L L
L L
L
MATERIAL: 18SWG MILD STEEL
FINISH: EPC - WHITE
01 FOR PRODUCTION R31611/1 1.2.06
SPECIAL FIREMANS CONTROL PANEL
C/WVISION WINDOWCOVER
INNER LID DETAIL
TRIANGLE INTERGRATED FIRE
1.2.06
31611
NTS
PM
K7903-03 01
355.0
500.0
45.0
35.0
12.0
18.5
7.0
97.5 90.0 90.0 90.0 30.0
130.0
80.0
DATE: SCALE:
W/O No. DRAWING No. REV:
CHK BY:
PROJECT:
NOTES:
R./C. NOTE No. DATE REV REVISION
DWN BY:
CLIENT:
A
K7903-01 C
NTS
PM
MATERIAL:
FINISH:
Firemans Override
AUTO
OFF
ON
GENERATOR
FAULT
LWR. GRD. SMOKE
CLEAR ASSIST
AUTO SHUT
SHUT
GAS VALVE
AUTO
OFF
ON
CLEAR ASSIST
AUTO AUTO
OFF
ON
STAIR
PRESSURISATION
BUILDING SMOKE ATRIUM LOUVRE
OPEN
WARNING
ENCLOSED WITHIN
240V AC
18SWG MILD STEEL
EPC - WHITE
FOR APPROVAL 24.1.06
FASCIA DRAWING
TRIANGLE INTERGRATED FIRE
24.1.06
31611
SCREENING - BLUE
SHUT
OPEN
OPEN
B 26.1.06 FOR INFORMATION
C FOR INFORMATION 1.2.06
SPECIAL FIREMANS CONTROL PANEL
C/WVISION WINDOWCOVER
398.0
35.0
543.0
130.0
YOUR LOGO
Page 108
Custom Engineered
Solutions
Applications
Smoke Damper Control Panels
Composite Relay Units
(c/w Resettable Latching Relay &
Firemans Switch)
Sprinkler System Indicator Panels
Pump Status Indicator Panels
Firemans Control Switch Panels
Analogue/Addressable Interface
Units (with or without integral
PSU)
Mimic Repeat Indicator Panels
(perspex/metal, metal only, black
& white or multi-coloured)
. . . . choose your fnish
. . . . choose your colour
. . . . choose your specifcation
Cust om
Specifcation
Floor standing triple width
enclosure with glazed doors.
Unit features geographical
foor plan layouts and 3rd
party voice alert system.
Bespoke Fire Alarm
Control Panel
housed in a special
compact enclosure
to suit customers
building layout.
Are you In the loop?
Kentecs popular In the loop e-mail bulletin has now been a regular
feature for over six years, providing articles on a variety of subjects
including news about new products, enhancements to existing
products and many other subjects relating to our products and
services along with general industry information.
If you would like to be In the loop you or a colleague can register for
free on our web site by visiting www.kentec.co.uk
For the more technical user we also produce the technically biased In
the technical loop e-mail bulletin, which can also be subscribed to by
visiting www.kentec.co.uk
For back issues of either publication please visit our web site.
Enhanced Training from Kentec
Due to the success of the Regional Syncro Training Seminars that have
been running for the past two years throughout the UK, we have now
extended this to 2011.
Each course is split over two days. The rst day is the Syncro
Foundation Course and the second day builds on this by providing
hands-on training on networking, expansion cards and conguring
complex systems. We can also provide product training on the Guide
graphics system and our Extinguishing control panels, either at our
oces or at customer locations in the UK and Internationally by prior
arrangement.
For more information on training or to register, please visit our web site
www.kentec.co.uk and click on the Training tab. Alternatively please
email [email protected].
Syncro ASM analogue addressable, re detection systems are available
from Kentec Electronics Limited, for a wide range of marine re alarm
system applications.
Syncro ASM re control panels can be networked to provide scalable
re alarm systems, suitable for many classes of vessel.
For more information please visit our web site www.kentec.co.uk and
click on the Marine tab. Alternatively please contact our sales
department on 01322 222121.
Marine approvals for Syncro ASM
0086/11
How to nd us?
Train
The nearest station is Dartford which is served by trains from Charing Cross, London
Victoria. Journey time approximately 40 minutes from Central London.
From M25 Clockwise
Leave M25 at Junction1b (signed Dartford & A225).
At the roundabout, take the third exit onto the A225.
Continue straight across the next roundabout and continue to a set of trac lights.
Turn left at lights onto Darenth Road.
Turn right onto Powder Mill Lane.
Turn left into Fawkes Avenue. We are located on the right.
From M25 Anti-Clockwise
Leave M25 at Junction 2 (signed London, Canterbury, A2 (M2) & Dartford (A225).
At the roundabout, take second exit and follow slip road towards Junction 1b,
At roundabout take rst exit onto the A225.
Turn left at lights onto Darenth Road. Turn right onto Powder Mill Lane.
Are you In the loop?
Kentecs popular In the loop e-mail bulletin has now been a regular
feature for over six years, providing articles on a variety of subjects
including news about new products, enhancements to existing
products and many other subjects relating to our products and
services along with general industry information.
If you would like to be In the loop you or a colleague can register for
free on our web site by visiting www.kentec.co.uk
For the more technical user we also produce the technically biased In
the technical loop e-mail bulletin, which can also be subscribed to by
visiting www.kentec.co.uk
For back issues of either publication please visit our web site.
Enhanced Training from Kentec
Due to the success of the Regional Syncro Training Seminars that have
been running for the past two years throughout the UK, we have now
extended this to 2011.
Each course is split over two days. The rst day is the Syncro
Foundation Course and the second day builds on this by providing
hands-on training on networking, expansion cards and conguring
complex systems. We can also provide product training on the Guide
graphics system and our Extinguishing control panels, either at our
oces or at customer locations in the UK and Internationally by prior
arrangement.
For more information on training or to register, please visit our web site
www.kentec.co.uk and click on the Training tab. Alternatively please
email [email protected].
Syncro ASM analogue addressable, re detection systems are available
from Kentec Electronics Limited, for a wide range of marine re alarm
system applications.
Syncro ASM re control panels can be networked to provide scalable
re alarm systems, suitable for many classes of vessel.
For more information please visit our web site www.kentec.co.uk and
click on the Marine tab. Alternatively please contact our sales
department on 01322 222121.
Marine approvals for Syncro ASM
0086/11
How to nd us?
Train
The nearest station is Dartford which is served by trains from Charing Cross, London
Victoria. Journey time approximately 40 minutes from Central London.
From M25 Clockwise
Leave M25 at Junction1b (signed Dartford & A225).
At the roundabout, take the third exit onto the A225.
Turn left at lights onto Darenth Road.
Turn right onto Powder Mill Lane.
From M25 Anti-Clockwise
Leave M25 at Junction 2 (signed London, Canterbury, A2 (M2) & Dartford (A225).
At the roundabout, take second exit and follow slip road towards Junction 1b,
At roundabout take rst exit onto the A225.
Turn left at lights onto Darenth Road. Turn right onto Powder Mill Lane.

Kentec Catalogue11-12

Uploaded by

Copyright:

Available Formats

Kentec Catalogue11-12

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Kentec Catalogue11-12

Uploaded by

Copyright:

Available Formats

By Appointment to Her Majesty The Queen

Supplier of Fire Detection Equipment

You might also like