TP250 series

60-cell multi-crystalline solar

photovoltaic modules

Manufactured in India Reliability under extreme

on leading edge module weather conditions, certified
production line using world to withstand snow loads of up
class processes to 5,400 Pa

Peace of mind guaranteed Reduced risk of failure –

by Tata Power Solar 25 year warranty claims of less than
linear module warranty 0.07% over two decades

Greater energy generated due TUV and UL certified Potential

to positive power tolerance of Induced Degradation free
up to 5W modules*

PRODUCT FEATURES
• 60 cell configuration with wattage ranging • Torsion and corrosion resistant with About Tata Power Solar
from 240 to 260W anodized aluminium frame
• High fill factor for improved energy • Unique back sheet design for high Tier 1** bankable module
conversion efficiency resistance to moisture ingress
manufacturer*** with 25 year history
• Cells sorted by power and current to • Enhanced reliability through use of
minimize mismatch losses in the field distinctive encapsulant and back sheet
Backed by $100B Tata Group;
• Electroluminescence tested for micro- • Ultra-soft interconnect with stress relief
cracks for enhanced reliability
eliminates need for expensive 3rd
• Highly reliable IP67 rated junction box • Optimized edge clearance for high quality party insurance
• MC4 compatible cable connectors rugged design
BP Solar heritage of state-of-
CERTIFICATIONS the-art technology and stringent
quality processes

Over 500 MW of modules shipped

Certified to IEC 61730, IEC 61215, IEC 61701, IEC 62804, UL 1703 and REACH standards globally

WARRANTY Highest standards of quality and

management (ISO 9001: 14001)
Product warranty: 10 year warranty on material and workmanship
Power warranty: 25 year linear power output warranty

* PID free certified modules available on order

Warranties are subject to the Terms and Conditions as per the Tata Power Solar Standard Warranty Document. ** Rated tier-1 bankable by Green Tech Media Research
Certifications may vary by module *** Bankability verified by third party auditors like Black & Veatch
 TP250 series

Modules in the TP250 series TP240 TP245 TP250 TP255 TP260

Electrical parameters at standard test conditions (STC)* Technical Drawing** Dimensions in mm

Nominal power output (W) 240 245 250 255 260
SIDE REAR VIEW
Power tolerance (W) 0 ~ +5 0 ~ +5 0 ~ +5 0 ~ +5 0 ~ +5 VIEW
959
Module efficiency (ŋ%) 14.40 14.70 15.00 15.30 15.60
Voltage at PMAX VMPP (V) 29.7 29.9 30.2 30.4 30.6
Current at PMAX IMPP (A) 8.10 8.20 8.30 8.40 8.49
800mm 1250mm
Open-circuit voltage VOC (V) 36.5 36.7 37.3 37.5 37.9 CABLE (+) CABLE (–)

Short-circuit current ISC (A) 8.68 8.70 8.71 8.76 8.80

Electrical parameters at NOCT

997 1666
Power output PMAX (W) 172.8 176.4 180.0 183.6 187.2
GROUNDING HOLES
2 Nos
Voltage at PMAX VMPP (V) 26.3 26.4 26.7 26.9 27.1
GROUNDING MARK
2 Nos
Current at PMAX IMPP (A) 6.58 6.67 6.74 6.83 6.91
Open-circuit voltage VOC (V) 32.5 32.7 32.8 32.8 32.9 OBLONG HOLE
8.5 x 12.5
Short-circuit current ISC (A) 7.1 7 7.27 7.35 7.45 7.55 4 Nos

Temperature coefficient characteristics

DRAIN HOLES IN
NOCT (ºC) 47 ± 2 ALL CORNERS

Module efficiency (%/ºC) -0.06 ± 0.01 1000

40
Temperature coefficient of PMAX (%/ºC) -0.4383
Temperature coefficient of VOC (%/ºC) -0.3305
Temperature coefficient of ISC (%/ºC) 0.0638

Operating conditions IV curve at multiple temperatures

10
Maximum system voltage (UL & IEC) (V) 600 & 1000
Current (A)

9
8
Maximum series fuse rating (A) 20 7
6
Limiting reverse current (A) 20 5
4 t = 0ºC
Operating temperature range (ºC) –40 and +85 3 t = 25ºC
2 t = 50ºC
t = 75ºC
Maximum static load (snow or wind) 113 psf (5400 Pa) 1 Voltage (V)
0
0 10 20 30 40 50 

Module general characteristics

Module dimensions L x W x H (mm) 1666 x 1000 x 40 IV curve at multiple irradiance
Module weight (approx) (kg [lbs]) 19.4 [42.8] 9
Current (A)

8
1000W/m2
Number of cells & size 60 cells & 156mm 7

6 800W/m2
Frame material Anodized aluminium
5
600W/m2
Glass 3.2mm ARC 4

3
400W/m2
Junction box IP67 rated 2

1 200W/m2
Cable connector MC4 compatible (4mm2)
0
0 5 10 15 20 25 30 35

Voltage (V)
Packaging details
Number of modules per pallet 26 * Irradiance of 1000W/m2, spectrum AM of 1.5 and cell
temperature of 25ºC
Number of pallets per 40ft container 28 Best in class AAA solar simulator (IEC 60904-9) used,
power measurement tolerance ±3%
DOC.NO. MOD-TP-250-032014-REV00

Box weight (kg) 605

** Tolerance for dimensions -3/+3mm
Box dimensions L x W x H (mm) 1700 x 1165 x 1200
Tolerance for cable length 0/+50mm

Listed specifications are subject to change without notice

Tata Power Solar is committed to enabling solar

For sales, service and other enquiries,
everywhere and bringing the power of the sun email us [email protected]
to people in the most efficient and cost effective
way possible. www.tatapowersolar.com