Bos Bcom V Sem 2022-23

Department of Computer Science/Computer Applications
Constitution of Board of Studies in Computer Applications

The Board of Studies in Computer Applications has been constituted by the Principal, SKR & SKR
Govt. College for Women (A), Kadapa as per UGC Autonomous guidelines XII plan (2012-2017) with the
following members
Chairperson/
S.No. Category Name Designation
Member
Incharge of the Lecturer in Computer
1 Smt. A.Haritha., M.Tech. Chairperson
Department Science
Smt. C.V.Krishnaveni., Lecturer in Computer

2 Faculty Members Member
M.Tech. Science
Lecturer in Computer
Smt.K.Vasudha Rani., M.Sc. Member
Science
Smt.M.Manjula Devi., M.Sc. Lecturer in Computer

Member
M.Phil, Science
Smt.K.Ramya Smitha., Lecturer in Computer
Member
M.I.T., B.Ed. Science
Smt.P.U.S.Madhuri., M.Sc., Lecturer in Computer
Member
M.A., B.Ed. Science
Smt.M.Lavanya., M.C.A, Lecturer in Computer

Member
M.B.A. Science
Smt.M.Subhanjali Lecturer in Computer

Member
M.Sc,B.Ed Science
Two Experts from Sri.G.Dayanandam.,
Outside the Lecturer in Computer Lecturer in Computer
3 Member
College to be Science, Science
nominated by GDC for Men(A),Kadapa
Dr. A.Sri Lakshmi.,
Academic Lecturer in Computer Lecturer in Computer
Member
Council Applications, Applications
GDC Rly Kodur.
Prof.C.Nagaraju.,
Department Of Computer
One expert Science, Professor, Dept Of University
4
nominated by VC Y.S.R.Engg.College of Computer Science Nominee
Y.V.U,
Proddatur.
One
representative
Industrialist,
from Industry/
Global Electro
5 corporate C. Reddy Bhaskar Member
Mechanical Equipments,
sector/allied
Kadapa
area relating to
placement
One P.G. Science, S.K.R. & S.K.R.
Smt.K.Ramya Smitha., Co-opt
6 meritorious Govt. College for
M.I.T., B.Ed. Member
alumnus Women(A),
Kadapa
Principal
SKR & SKR Govt. College for Women
Kadapa
R.C.No.A-2/ GDCW (A)/Acd/BOS/Syllabi & Regulations/2020 Date:
From To
The Principal The Chairman & Members
SKR &SKR Govt. College for Women (A) Board of Studies in Computer Applications,
Kadapa
Dear Sir/ Madam,
Sub: SKR & SKR Govt. College for Women (Autonomous), Kadapa – Department of Computer
Applications Meeting of Board of Studies in Computer Applications -Reg.
****
I am happy to invite the Chairman / members of Board of Studies meeting in Computer Applications to be
held in the Department of at 02:30 PM on -08-2022 to discuss the pattern of semester-wise syllabus, question paper,
panel of examiners, question paper setters and other related subjects.
Chairperson/
S.No. Category Name Designation
Member
Incharge of the Lecturer in Computer
1 Smt A.Haritha., M.Tech. Chairperson
Department Science
Smt.C.V.Krishnaveni., Lecturer in Computer

2 Faculty Members Member
M.Tech. Science
Smt.K.Vasudha Rani., M.Sc. Member
Science
Smt.M.Manjula Devi., Lecturer in Computer

Member
M.Sc., M.Phil. Science
Smt.K.Ramya Smitha., Lecturer in Computer

Member
M.I.T., B.Ed. Science
Smt.P.U.S.Madhuri., Lecturer in Computer

Member
M.Sc., M.A., B.Ed. Science
Smt.M.Lavanya., Lecturer in Computer

Member
M.C.A., M.B.A. Science
Smt.M.Subhanjali MSc,B.Ed Member
Science
Sri.G.Dayanandam.,
Two Experts from Science, Lecturer in Computer
Member
Outside the Science
GDC for Men(A), Kadapa
College to be
3
nominated by
Dr. A.Sri Lakshmi.,
Academic
Lecturer in Computer Lecturer in Computer
Council Member
Applications, Applications
GDC Rly Kodur.
Prof.C.Nagaraju.,
Department Of Computer
One expert Science, Professor, Dept Of University
4
nominated by VC Y.S.R.Engg.College of Computer Science Nominee
Y.V.U,
Proddatur.
One
representative
Industrialist,
from Industry/
Global Electro
5 corporate C. Reddy Bhaskar Member
Mechanical Equipments,
sector/allied
Kadapa
area relating to
placement
One P.G. Science, S.K.R. &
Smt.K.Ramya Smitha., Co-opt
6 meritorious S.K.R. Govt. College for
M.I.T., B.Ed. Member
alumnus Women(A),
Kadapa
Honorarium will be paid to outstation members and conveyance allowance to the local members as per the norms
of the college.
Yours faithfully
Principal
Structure of B.Com Computer Applications for 3rd year under CBCS
Year Semester Paper Subject Hrs Marks Credits
per
week
6A Big data Analytics using 3 100 3

R
Big data Analytics using 2 50 1
6A R Lab
7A Data Science using 3 100 3
Python
Data Science using 2 50 1
7A Python Lab
OR
6B Mobile application 3 100 3

development
Mobile application 2 50 1
6B development Lab
7B Cyber security and 3 100 3
Third malware analysis
Year V Cyber security and 2 50 1
7B malware analysis Lab
OR
6C E– commerce 3 100 3
application
development
E– commerce 2 50 1
6C application
development Lab
7C Real time governance 3 100 3
system (RTGS)
Real time governance 2 50 1
7C system (RTGS) Lab
OR
6D Multimedia Tools and 3 100 3

Applications
Multimedia Tools and 2 50 1
6D Applications Lab
7D Digital imaging 3 100 3
Digital imaging Lab 2 50 1

7D
Approved by:
1. Smt.A.Haritha Chairperson
2. Prof.C.Nagaraju University Nominee
3. Sri.G.Dayanandam Subject Expert
4. Dr. A.Sri Lakshmi Subject Expert
5. C. Reddy Bhaskar Industrialist
6. Smt.K.Ramya Smitha Alumnus
7. Smt.C.V.Krishnaveni Faculty member
8. Smt.K.Vasudha rani Faculty member
9. Smt.M.Manjula Devi, Faculty Member
10. Smt.K.Ramya Smitha, Faculty Member
11. Smt.P.U.S.Madhuri, Faculty Member
12 Smt.M.Lavanya, Faculty Member

13. Smt.M.Subhanjali Faculty Member

Minutes of board of studies in Computer Applications held on .08.2022
The Board of Studies meeting in Computer Applications was held on .08.2022 at 02.30 P.M in the
Department of Computer Applications, SKR & SKR Govt. College for Women (A), Kadapa to discuss the
agenda mentioned below:
Members Present:
University
2. Prof.C.Nagaraju
Nominee
4. Dr. A. Sri Lakshmi Subject Expert
7. Smt.C.V.Krishna veni Faculty member
8. Smt.K.Vasudha rani Faculty member
Smt.M.Manjula Devi
9. Faculty Member
Smt.K.Ramya Smitha
10. Faculty Member
Smt.P.U.S.Madhuri
11. Faculty Member
Smt.M.Lavanya
12 Faculty Member
13 Smt.M.Subhanjali Faculty Member
Agenda:
1. Discussion on syllabi with regard to CBCS by APSCHE 3rd Year B.Com with Computer Applications.
2. Procedure relevant to examinations both Internal and External.
3. To discuss the pattern of question paper model and allotment of credits.
4. Suggesting panel of names for appointment of paper setters and examiners.
5. Any other matter relating to CBCS system 3rd year BCom Degree courses.
The BOS members are thoroughly discussed and resolved to implement the following points to be
considered
1. The Committee discussed and approved, B.Com courses which are in combination with Computer
Applications.
2. The Committee also discussed and approved the frame work.
3. The BOS committee also discussed and approved the curriculum structure which consists of Five
Units.
4. The Committee also approved the External and Internal Evaluation with the ratio of 75 and 25.
5. The BOS Committee also approved the list of Panel of Examiners and Question Paper Setters.
CONTINUOUS INTERNAL ASSESSMENT (25 MARKS)
a Written exam 15 marks

b Student Seminar(Semester – 5 Marks
III) /Student Study
Projects/Field Projects
(Semester –IV)
c Assignment/ Co&Extra- 5 Marks
Curricular Activities
Co- Curricular Activities: Debate, Group Discussion, Essay Writing, Elocution, JAM sessions,
Quizzes, MOOCS, Spoken Tutorials, TCS-ion, JKC training, Students LMS content.
Extra Curricular Activities: NCC, NSS, Internship etc.
EXTERNAL EXAMINATION (75 MARKS)
Time: 3 hrs Max. Marks: 75
PART – A
Answer any Five out of Ten questions. Each question carries Five marks. (5x5 = 25 Marks)
PART – B
Answer All questions (Internal choice) each question carries Ten marks (5x10=50 Marks)
6. The Committee also discussed and approved the Model Question Papers and Credits.
7. The Committee also discussed the various enrichment programmes i.e Online Courses,
Certificate Courses, Seminars / webinars, quizzes, Workshops etc
Approved by:
University
2. Prof.C.Nagaraju
Nominee
4. Dr. A.Sri Lakshmi Subject Expert
7. Smt.C.V.Krishnaveni Faculty member
8. Smt.K.Vasudha Rani Faculty member
Smt.M.Manjula Devi
9. Faculty Member
Smt.K.Ramya Smitha
10. Faculty Member
Smt.P.U.S.Madhuri
11. Faculty Member
Smt.M.Lavanya
12 Faculty Member
13 Smt.M.Subhanjali Faculty Member
Department of Computer Science

PANEL OF EXAMINERS
SNO NAME OF THE EXAMINER
1 K.H.Sampath Kumar Raju,

Lecturer in Computer Applications
GOVT DEGREE COLLEGE, RAJAMPETA
Mobile# 9885094573
2 S.A.Jeelani Basha,
Lecturer in Computer Applications
GOVT DEGREE COLLEGE, RAYACHOTY
Mobile# 9441762630
3 Smt.P.Prasanna Kumari,
Lecturer in Computer Science
SRI HARI DEGREE COLLEGE, KADAPA
Mobile# 9703303167
4 Sri.K.Pulla Reddy,
Lecturer in Computer Science,
SAHITHYA DEGREE COLLEGE, KHAJIPET
KADAPA (Dt)
Mobile# 8106130624
5 S.Muthahar,
Lecturer in Computer Science
SRI HARI DEGREE COLLEGE, KADAPA
Mobile# 9885545889
Department of Computer Science

PANEL OF PAPER SETTERS
1 Dr.B.Kavitha,
Lecturer in Computer Applications,
S.A.V Govt Degree college,
SRIKALAHASTHY.
Mobile#9912316680
E-Mail:[email protected]
2 B.Pedda Narayana,
GDC,Udayagiri, Nellore(Dt)
Mobile# 8074131280
3 Dr.M.Pramod Kumar,
S.C.N.R.Govt Degree College,Proddatur
Mobile # 6303586556
Email Id: [email protected]
4 B.Lakshmi Devi,
SVSSC Govt Degree College,
Sullurpet,Nellore (Dt)
Mobile# 07893204741
Email id:[email protected]
B.Com 5th Semester Computer Applications Syllabus under CBCS
Course 6A: Bigdata Analytics Using R
Course Objectives:
This course aims to provide exposure to Bigdata Analytics Using R. It introduces the concepts of the
Programming with R Language.
Course Learning Outcomes:
Upon successful completion of the course, a student will be able to:

1. Understand data and classification of digital data.
2. Understand Big Data Analytics.
3. Load data in to R.
4. Organize data in the form of R objects and manipulate them as needed.
5. Perform analytics using R programming.
UNIT I
Introduction to Big data : Data, classification Of Digital Data—structured unstructured, semi-structured

data, characteristics of data, evaluation of big data, definition and challenges of big data, what is big data
and why to use big data ?business intelligence Vs big data.
UNIT II
Big data Analytics : What is and isn’t big data analytics? Why hype around big data analytics?
Classification of analytics, top challenges facing big data, importance of big data analytics, technologies
needed to meet challenges of big data.
UNIT III
Introduction to R and getting started with R : What is R? Why R? , advantages of R over other
programming languages, Data types in R-logical, numeric, integer, character, double, complex, raw,
coercion, ls() command, expressions, variables and functions, control structures, Array, Matrix,
Vectors, R packages.
UNIT IV
Exploring data in R : Data frames-data frame access, ordering data frames, R functions for data frames
dim(), nrow(), ncol(), str(), summary(), names(), head(), tail(), edit() .Load data frames—reading
from .CSV files, sub setting data frames, reading from tab separated value files, reading from tables.
.
UNIT V
Data Visualization using R:

Reading and getting data into R (External Data): XML files, Web Data, JSON files, Databases, Excel
files.
Working with R Charts and Graphs: Histograms, Bar Charts, Line Graphs, Scatterplots, Pie
Charts
Prescribed Book:
1. Seema Acharya , Subhashini Chellappan --- Big Data And Analytics second
edition, Wiley
2. Seema Acharya--Data Analytics using R, McGraw Hill education (India) Private
Limited.
3. Big Data Analytics, Introduction to Hadoop, Spark, and Machine-Learning, Raj
kamal,
Preeti Saxena, McGraw Hill, 2018.
4. Big Data, Big Analytics: Emerging Business intelligence and Analytic trends for
Today's
Business, Michael Minelli, Michelle Chambers, and Ambiga Dhiraj, John Wiley &
Sons,
2013
Reference Books:
1. An Introduction to R, Notes on R: A Programming Environment for Data Analysis and

Graphics. W. N. Venables, D.M. Smith and the R Development Core Team
III B.Com Computer Applications V Semester
Course 6A: Bigdata Analytics Using R LAB
1. Create a vector in R and perform operations on it.

2. Create integer, complex, logical, character data type objects in R and print their values and
their class using print and class functions.
3. Write code in R to to demonstrate sum(), min(), max() and seq() functions.
4. Write code in R to manipulate text in R using grep(), toupper(), tolower() and substr()
functions.
5. Create data frame in R and perform operations on it.
6. Import data into R from text and excel files using read.table () and read.csv () functions.
7. Write code in R to find out whether number is prime or not.
8. Print numbers from 1 to 100 using while loop and for loop in R.
9. Write a program to import data from csv file and print the data on the console.
10. Write a program to demonstrate histogram in R.
Model Question Paper
Course 6A: Bigdata Analytics Using R
III BCOM V SEMESTER
Time: 3 Hrs Max Marks: 75

SECTION – A
Answer any Five out of Ten questions. Each question carries Five marks (5x5=25Marks)
1. Explain about classification of Digital data?
2. Explain in detail about big data?
3. Explain in detail of classification of analytics?
4. Why hype around bigdata analytics ?
5. Explain about advantages of R?
6. Explain about Data types of R?
7. Explain about data Frames?
8.Explain about R functions for data frames?
9. Write about XML files?
10. Explain About Line graphs?
SECTION – B
Answer Five questions (Internal Choice). Each question carries Ten marks. (5X10=50Marks)
UNIT-I
11. Explain about characteristics of Bigdata?
OR
12. Explain about business intelligence Vs big data ?
UNIT-II
13. Write about importance of big data analytics?
OR
14. Explain about technologies needed to meet challenges of big data?
UNIT-III
15. Write advantages of R over other programming languages?
OR
16. Write about control structures in R?
UNIT-IV
17. Explain about R functions for data frames?
OR
18. Explain about CSV files?
UNIT-V
19.Explain about , JSON files ?
OR
20. Explain about Charts in R?

Course 7A: Data Science Using Phyton
Course Objectives:
This course aims to provide exposure to Data Science Using Phyton. It introduces the concepts of the Data
science and its importance, Developing Programs for Phyton.

1. Understand basic concepts of data science
2. Understand why python is a useful scripting language for developers.
3. Use standard programming constructs like selection and repetition.
4. Use aggregated data (list, tuple, and dictionary).
5. Implement functions and modules.
UNIT – I
Introduction to data science: Data science and its importance, advantages of data science, the process of
data science Responsibilities of a data scientist, qualifications of data scientists, would you be a good data
scientist, why to use python for data science.
UNIT – II
Introduction to python: What is python , features of python, history of python, writing and executing the
python program, basic syntax, variables, keywords, data types ,operators ,indentation, Conditional
statements-if, if-else, nested if-else, looping statements-for, while, break, continue, pass
UNIT – III
Control structures and strings:

Strings - definition, accessing, slicing and basic operations
Lists - introduction, accessing list, operations, functions and methods,
Tuples - introduction, accessing tuple
Dictionaries - introduction, accessing values in dictionaries
UNIT – IV
Functions and modules :

Functions - defining a function, calling a function, types of functions, function arguments, local and
global variables, lambda and recursive functions, Modules- math and random
UNIT –V
Classes & Objects:

Classes and Objects, Class method and self-argument, class variables and object variables, public and
private data members, private methods, built-in class attributes, static methods.
Reference Books:
1.Steven cooper--- Data Science from Scratch, Kindle edition
2.Reemathareja—Python Programming using problem solving approach, Oxford Publication
Course 7A: Data Science Using Phyton LAB
1. Python Program to Find the Square Root

2. Python Program to Swap Two Variables
3. Python Program to Generate a Random Number
4. Python Program to Check if a Number is Odd or Even
5. Python Program to Find the Largest Among Three Numbers
6. Python Program to Check Prime Number
7. Python Program to Display the multiplication Table
8. Python Program to Print the Fibonacci sequence
9. Python Program to Find the Sum of Natural Numbers
10. Python Program to Find Factorial of Number Using Recursion
11. Python Program to work with string methods.
12. Python Program to create a dictionary and print its content.
13. Python Program to create class and objects.
Course 7A: Data Science Using Phyton
III BCOM V SEMESTER
Time: 3 Hrs Max Marks:75 M

SECTION – A
Answer any Five out of Ten questions. Each question carries Five marks (5x5= 25Marks)
1. What is Data Science? Explain the its importance?
2. Explain about the process of data science ?
3. Explain about features of python?
4. Explain about data types?
5. Write about basic operations in Strings?
6. Write about Tuples?
7. Explain about types of functions?
8. Explain about local and global variables?
9. Explain about Class method and self-argument?
10. Write about static methods ?
SECTION – B
Answer ALL questions (Internal Choice). Each question carries Ten marks. (5X10=50 Marks)
UNIT-I
11. Explain about advantages of data science?
OR
12. Why to use python for data science ?
UNIT-II
13. Explain about Conditional statements in Phyton?
OR
14. Explain about looping statements in Phyton ?
UNIT-III
15. Explain about Lists in Phyton?
OR
16. Explain about Dictionaries in Phyton?
UNIT-IV
17. Explain about Functions in Phyton?
OR
18. Explain about Modules in Phyton ?
UNIT-V
19. Explain about Classes and Objects?
OR
20. Explain about built-in class attributes?

Course 6B:Mobile Application Development
Course Objectives:
This course aims to provide exposure to Mobile Application Development. It introduces the concepts of the
java JDK, Android SDK. Android development tools, MIT App

1. Identify basic terms ,tools and software related to android systems
2. Describe components of IDE, understand features of android development tools
3. Describe the layouts and controls
4. Explain the significance of displays using the given view
5. Explain the features of services and able to publish android Application
6. Developing interesting Android applications using MIT App Inventor
UNIT – I
Introduction: Introduction to Android , open headset alliance, Android Ecosystem Need of Android
Features of Android Tools and software required for developing an Application
UNIT – II
operating system, java JDK, Android SDK. Android development tools. Android virtual devices. steps to
install and configure Android studio and sdk. Android activities.
UNIT – III
control flow, directory structure. components of a screen. fundamental UI design. linear layout, absolute
layout , table layout
text view
edit text, button, image button, radio button, radio group, check box, and progress bar, list view, grid view,
image view, scroll view, time and date picker toast
UNIT – IV
android platform services, Android system Architecture, Android Security model
UNIT –V
Introduction of MIT App, Inventor, Application

Coding 5.3Programming Basics & Dialog
Audio& Video File
Text Books:
1. Erik Hellman, “Android Programming – Pushing the Limits”, 1st Edition, Wiley India Pvt
Ltd, 2014.
2. App Inventor: create your own Android apps by Wolber, David (David Wayne)
Reference Books:
1. Dawn Griffiths and David Griffiths, “Head First Android Development”, 1st Edition,
O’Reilly SPD Publishers, 2015.
2. J F DiMarzio, “Beginning Android Programming with Android Studio”, 4th Edition,
Wiley India Pvt Ltd, 2016. ISBN-13: 978-8126565580
3. Anubhav Pradhan, Anil V Deshpande, “ Composing Mobile Apps” using Android, Wiley
2014, ISBN: 978-81-265-4660-2
4. Android Online Developers Guide
5. http://developer.android.com/reference/ Udacity: Developing Android
6. Apps- Fundamentals
7. https://www.udacity.com/course/developing-android-appsfundamentals--ud853-nd
8. http://www.appinventor.mit.edu/
Course 6B:Mobile Application Development LAB
1. Demonstrate mobile technologies and devices

2. Demonstrate Android platform and applications overview
3. Working with texts , shapes, buttons and lists
4. Develop a calculator application
5. Implement an application that creates a alarm clock
Course 6B: Mobile Application Development
III BCOM V SEMESTER

SECTION – A
1. What is Android? Explain the its importance?
2. Explain about Android Ecosystem?
3. Explain about operating system ?
4. Explain about Android SDK?
5. Write about control flow?
6. Write about table layout?
7. Explain about image view?
8. Explain about android platform services?
9. Explain about Inventor?
10. Write about MIT App ?
SECTION – B
UNIT-I
11. Explain about Features of Android ?
OR
12.Explain about Tools and software required for developing an Application?
UNIT-II
13. Explain about Android development tools?
OR
14. Explain about steps to install and configure Android studio?
UNIT-III
15. Explain about fundamental UI design ?
OR
16. Explain about text view?
UNIT-IV
17. Explain about Android system Architecture?
OR
18. Explain about Android Security model?
UNIT-V
19. Explain about Application Coding?
OR
20. Explain about Basics & Dialog in 5.3 Programming?

Course 7B: Cyber Security And Malware Analysis
Course Objectives:
This course aims to provide exposure to Cyber Security And Malware Analysis. It introduces the concepts of
Networks & cyber security, NIST Cyber security framework, malware.

1. Understand the computer networks, networking tools and cyber security
2. Learn about NIST Cyber Security Framework
3. Understand the OWASP Vulnerabilities
4. Implement various Malware analysis tools
5. Understand about Information Technology act 2000
UNIT – I
Introduction to Networks & cyber security :

 Computer Network Basics
 Computer network types
 OSI Reference model
 TCP/IP Protocol suite
 Difference between OSI and TCP/IP
 What is cyber, cyber-crime and cyber-security
 All Layer wise attacks
 Networking devices: router, bridge, switch, server, firewall
 How to configure: router
 How to create LAN
UNIT – II
NIST Cyber security framework:
 Introduction to the components of the framework

 Cyber security Framework Tiers
 What is NIST Cyber security framework
 Features of NIST Cyber security framework
 Functions of NIST Cyber security framework
 Turn the NIST Cyber security Framework into Reality/ implementing the framework
UNIT – III
OWASP:
 What is OWASP?
 OWASP Top 10 Vulnerabilities
o Injection
o Broken Authentication
o Sensitive Data Exposure
o XML External Entities (XXE)
o Broken Access Control
o Security Misconfiguration
o Cross-Site Scripting (XSS)
o Insecure Deserialization
o Using Components with Known Vulnerabilities
o Insufficient Logging and Monitoring
 Web application firewall
UNIT –IV
 What is malware
 Types of malware
 Key loggers
 Trojans
 Ran some ware
 Rootkits
 Antivirus
 Firewalls
 Malware analysis
 VM ware
 How to use sandbox
 Process explorer
 Process monitor
UNIT –V
CYBER SECURITY: Legal Perspectives:
 Cybercrime and the legal landscape around the world

 Indian IT ACT 2000 --Cybercrime and Punishments
 Challenges to Indian law and cybercrime scenario in India
Textbooks:
1. Computer Networks | Fifth Edition | By Pearson (6th Edition)|Tanenbaum, Feamster &

Wetherill
2. Computer Networking | A Top-Down Approach | Sixth Edition | By Pearson | Kurose
James F. Ross Keith W.
3. Cyber Security by Sunit Belapure, Nina Godbole|Wiley Publications
4. TCP/IP Protocol Suite |Mcgraw-hill| Forouzan|Fourth Edition
Course 7B: Cyber Security And Malware Analysis LAB
1. Configure a LAN by using a switch

2. Configure a LAN by using Router
3. Perform the packet sniffing mechanism by download the “wire shark” tool and extract the
packets
4. Perform an SQL Injection attack and its preventive measure to avoid Injection attack
Course 7B: Cyber Security And Malware Analysis
III BCOM V SEMESTER
SECTION – A
1. What is Network? Explain types of Network?
2. Explain about cyber-security?
3. Explain about Cyber security Framework Tiers?
4. Explain about NIST Cyber security framework?
5. Write about OWASP?
6. Write about Cross-Site Scripting (XSS)?
7. Explain about Antivirus?
8. Explain about Firewalls?
9. Explain about Cibercrime?
10. Write about cybercrime scenario in India ?
SECTION – B
UNIT-I
11. Explain about OSI Reference model ?
OR
12.Explain about Networking devices?
UNIT-II
13. Explain about Features of NIST Cyber security framework?
OR
14. Explain about Functions of NIST Cyber security framework?
UNIT-III
15. Explain about OWASP Top 5 Vulnerabilities?
OR
16. Explain about Web application firewall?
UNIT-IV
17. Explain about Types of Malware?
OR
18. Explain about Malware Analysis?
UNIT-V
19. Explain about Indian IT ACT 2000?
OR
20. Explain about Challenges to Indian law?

Course 6C E– Commerce Application Development
Course Objectives:
This course aims to provide exposure to E– Commerce Application Development. It introduces the
concepts of E-commerce Application Development E-commerce Models, EDI, HTML, JAVASCRIPT,
PHP.

1. To apply in an integrative and summative fashion the students’ knowledge in all
fields of business studies by drafting a website presence plan.
2. To understand the factors needed in order to be a successful in ecommerce
3. To gain the skills to bring together knowledge gathered about the different
components of building a web presence
4. To critically think about problems and issues that might pop up during the
establishment of the web presence
5. To apply Word Press as a content management system (CMS), Plan their website by
choosing colour schemes, fonts, layouts, and more
UNIT – I
Introduction to E– commerce:
Meaning and concept – E– commerce
E– commerce v/s Traditional Commerce
E– Business & E– Commerce – History of E– Commerce
EDI – Importance, features & benefits of E– Commerce
Impacts, Challenges & Limitations of E– Commerce
UNIT – II
Business models of E – Commerce: Business to Business

2.1.2 Business to customers
2.1.3Customers to Customers
Business to Government
Business to Employee
Influencing factors of successful E– Commerce
Architectural framework of Electronic Commerce
Web based E Commerce Architecture.
Internet Commerce
UNIT – III
Electronic data Interchange

EDI Technology
EDl- Communications
EDI Agreements
E– Commerce payment system.
Digital Economy
UNIT –IV
A Page on the web - HTML Basics

Client Side scripting -JAVA SCRIPT basics
Server side Scripting- PHP basics.
UNIT –V
Logging in to Your Word press Site

word press dash board
creating your first post
adding photos and images
creating hyper link
adding categories and tags
Textbooks:
1. Turban, Rainer, and Potter, Introduction to E-Commerce, second edition, 2003

2. H. M. Deitel, P. J. Deitel and T. R. Nieto, E-Business and E-Commerce:
How to Programe, Prentice hall, 2001
3. WordPress All-in-One For Dummies -written by Lisa Sabin Wilson
with contributions by Michael Torbert, Andrea Rennick, Cory Miller, and Kevin
Palmer
Reference Books:
1. Elias. M. Awad, “Electronic Commerce", Prentice-Hall of India Pvt Ltd.
2. Ravi Kalakota, Andrew B. Whinston, "Electronic Commerce-A Manager's guide",
Addison-Wesley
3. https://w3cschools.com
4. David Whiteley, E-Commerce: Strategy, Technologies and Applications, Tata
McGraw Hill.
Course 6C: E– Commerce Application Development LAB
Case study of e –commerce
1. Home page design of web site
2. Validation using PHP
3. Implement Catalogue design
4. Implement Access control mechanism( eg: username and password)
5. Case study on business model of online E-Commerce store
Course 6C: E– Commerce Application Development
III BCOM V SEMESTER

SECTION – A
1. What is Ecommerce? Explain it?
2. Explain about EDI?
3. Explain about Web based E Commerce Architecture?
4. Explain about Internet commerce?
5. Write about EDI Technology ?
6. Write about Digital Economy?
7. Explain about HTML Basics?
8. Explain about Client Side scripting?
9. Explain about creating your first post?
10. Write about adding categories and tags?
SECTION – B
UNIT-I
11. Explain about features & benefits of E– Commerce?
OR
12.Explain about Challenges & Limitations of E– Commerce?
UNIT-II
13. Explain about Business models of E – Commerce?
OR
14. Explain about Architectural framework of Electronic Commerce?
UNIT-III
15. Explain about EDl- Communications?
OR
16. Explain about E– Commerce payment system?
UNIT-IV
17. Explain about HTML Concepts?
OR
18. Explain about JAVA SCRIPT basics?
UNIT-V
19. Explain about adding photos and images?
OR
20. Explain about creating hyper link?
Course 7C :Real Time Governance System (RTGS)
Course Objectives:
This course aims to provide exposure to Real Time Governance System. It introduces the concepts of
E-Governance, E-Governance Infrastructure, E-Governance in India, Latest Applications in Real Time
Governance.
Upon successful completion of this course, students will have the knowledge and skills to
1. Understand the terms regarding Governance, E-Governance and RTGS
2. Learn about E-Governance Infrastructure
3. Understand the E-Governance implementation in several countries
4. Understand the E-Governance implementation in several Indian states
5. Understand the applications of RTG
UNIT – I
Introduction to E-Governance:
 Government, Governance and Good Governance
 What is E-Governance or Electronic Governance?
 E-Government and E-Governance: A conceptual Analysis
 Objectives
 Components
 application domains
 four phase model
 implementing E-Governance
 issues while implementing E-Governance
 Opportunities and challenges
 Types of E-Governance
 What is Real-Time Governance (RTG)
 Real Time Governance Society (RTGS)
UNIT – II
E-Governance Infrastructure:
 Data Systems infrastructure
 Executive Information Systems
 Management Information Systems
 Knowledge Management Systems
 Transaction Processing Systems
 Legal Infrastructural preparedness
 IT Act 2000
 Challenges to Indian law and cybercrime scenario in India
 Amendments of the Indian IT Act
 Institutional Infrastructural preparedness
 Internet
 intranet
 extranet
 Human Infrastructural preparedness
 Top-level management
 Middle-level management
 Low-level management
 Technological Infrastructural preparedness
 Information and communications technology
 Data Warehousing
 Cloud Computing
UNIT – III
E-Governance: Country Experience:
 INDIA
 US
 UK
 AUSTRALIA
 DUBAI
UNIT –IV
E-Governance in India:
 Andhra Pradesh
 Karnataka
 Kerala
 Uttar Pradesh
 Madhya Pradesh
 West Bengal
 Gujarat
UNIT –V
Latest Applications in Real Time Governance:

 Agriculture
 Rural Development
 Health care
 Education
 Tourism
 Commerce and Trade
Textbooks:
1. E-Governance: concepts and case studies| CSR Prabhu| Prentice-Hall|

2. E-Governance| Niranjanpani, Sanhari Mishra | Himalaya Publishing House
Website References:
1. http://www.egov4dev.org/success/case/
2. https://vikaspedia.in/e-governance/resources-for-vles
3. https://altametrics.com/en/information-systems/information-system-types.html
4. https://core.ap.gov.in/CMDashBoard/Index.aspx
Course 7C: Real Time Governance System (RTGS) LAB
1: Write a Report on the role of Nationwide Networking in E-Governance
2: Write a Report on SETU: A Citizen Facilitation Centre in India, regarding it’s
successful or failure journey.
3: Write a Report on National Cyber Security Policy, how it is useful to Indian citizens.
Week 4: Write a Report on mee-seva/Village Secretariat/Ward secretariat, a new paradigm in
citizen services.
5: Write a Report on how Andhra Pradesh is implementing RTGS in Agriculture. Week
6: Write a Report on how Andhra Pradesh is implementing RTGS in social welfare
schemes
7: Write a Report on how Andhra Pradesh is implementing RTGS in waste lands,
agricultural lands and house properties.
8: Write a Report on Electronic Birth Registration in any one state of our country.
Course 7C: Real Time Governance System
III BCOM V SEMESTER

SECTION – A
1. What is E-Governance? Explain it?
2. Explain about four phase model ?
3. Explain about Management Information Systems?
4. Explain about intranet & extranet?
5. Write about Country Experience in E-Governance?
6. Write about Country Experience in DUBAI?
7. Explain about E-Governance in Kerala?
8. Explain about E-Governance in Gujarat?
9. Explain about Agriculture in Latest Applications in RTGS?
10. Write about Health care in RTGS?
SECTION – B
UNIT-I
11. Explain about Types of E-Governance?
OR
12.Explain about Real-Time Governance (RTG)?
UNIT-II
13. Explain about Human Infrastructural preparedness?
OR
14. Explain about Data Warehousing?
UNIT-III
15. Explain about Country Experience INDIA ?
OR
16. Explain about Country Experience UK?
UNIT-IV
17. Explain about E-Governance in INDIA?
OR
18. Explain about E-Governance in Andhra Pradesh?
UNIT-V
19. Explain about Latest Applications in Real Time Governance?
OR
20. Explain about Latest Applications in Real Time Governance in Education?
Course 6D : Multimedia Tools And Applications

Course Objectives:
This course aims to provide exposure to Multimedia Tools And Applications. It introduces the concepts
of multimedia, Image Data Representations and color models, Multimedia Data Compression, Video
Compression Techniques
,
1. Gain knowledge on the concepts related to Multimedia.

2. Understand the concepts like image data representation and colour modes.
3. Understand the different types of video signals and digital audio.
4. Know about multimedia data compression types and audio compression standards
5. Know about basic video compression techniques.
UNIT – I
Introduction to multimedia:
1. What is Multimedia?
2. Components of Multimedia System
3. Multimedia and Hypermedia
4. Multimedia Authoring metaphors
5. Multimedia Production
6. Multimedia Presentation
7. Some Technical Design Issues
8. Automatic Authoring
UNIT – II
Image Data Representations and color models:

1. Color science Human vision Image data types:
2. 2.Black & white images
1-bit images (Binary image)
8 -bit (Gray -level images)
3. Color images
24-bit color images
8-bit color images
4. Color models
UNIT – III
Fundamental concepts in video
1. Types of Video Signals
Analog Video
Digital Video
Basics of Digital Audio:
2. What is Sound?
Digitization of Sound
Quantization and Transmission of Audio
Pulse code modulation
Differential coding of audio
Predictive coding
UNIT –IV
Multimedia Data Compression:
1. Introduction
Basics of Information Theory
Lossless Compression Algorithms
Fix-Length Coding
Run‐length coding
1.2.4 Dictionary‐based coding
Variable Length Coding
Huffman Coding Algorithm
Audio Compression standards:
2. Introduction
Psychoacoustics model
MPEG Audio
UNIT –V
Basic Video Compression Techniques:

1. Introduction to Video compression
2. Video compression standard H.261
3. Video compression standard MPEG-1
Text Books:
Fundamentals of Multimedia by Ze-Nian Li & Mark S. Drew. Publisher: Prentice Hall
Reference Books:
1. An introduction to digital multimedia by Savage, T. M. and Vogel, K. E. 2008.
2. Digital Multimedia by Nigel Chapman & Jenny Chapman.
2009. Online Resources: https://ksuit342.wordpress.com/lectuers/
https://www.tutorialspoint.com/multimedia
Course 6D: Multimedia Tools And Applications LAB
1. Editing images using GIMP
2. Improve the Quality of your Image in GIMP
3. Create an impressive background in GIMP
4. Applying Shadow & Highlight effects in images
5. Black& white and color photo conversion.
Course 6D: Multimedia Tools And Applications
III BCOM V SEMESTER
SECTION – A
1. Explain about Multimedia?
2. Explain about Components of Multimedia System?
3. Explain about Color image?
4. Explain about Image data types?
5. Write about Analog Video?
6. Write about Pulse code modulation?
7. Explain about Information Theory?
8. Explain about MPEG Audio?
9. Explain about Video compression?
10. Write about Video compression standard MPEG-1?
SECTION – B
UNIT-I
11. Explain about Multimedia and Hypermedia?
OR
12.Explain about Multimedia Presentation?
UNIT-II
13. Explain about Black & white images?
OR
14. Explain about Color models?
UNIT-III
15. Explain about Quantization and Transmission of Audio?
OR
16. Explain about Predictive coding?
UNIT-IV
17. Explain about Lossless Compression Algorithms?
OR
18. Explain about Huffman Coding Algorithm?
UNIT-V
19. Explain about Basic Video Compression Techniques?
OR
20. Explain about Video compression standard H.261?
Course 7D : Digital Imaging

Course Objectives:
This course aims to provide exposure to Digital Imaging. It introduces the concepts of Graphics, Objects,
Digital Photos, Filters.

1. Gain knowledge about Types of Graphics, Types of Objects and Types of video editing
tools
2. Show their skills in editing and altering photographs for through
a basic understanding of the tool box.
3. Gain knowledge in using the layers.
4. Gain knowledge in using the selection tools, repair tools.
5. Gain knowledge in using selection tools, applying filters and can show their skills.
UNIT – I
1. Types of Graphics
Raster vs Vector Graphics
2. Types of Objects
Audio formats
Video formats
Image formats
Text document formats
3. Types of video editing
4. Different color modes.
5. Image Scanner
Types of Image Scanners
UNIT – II
1. What is GIMP?
2. GIMP tool box window
3. Layers Dialog
4. Tool Options Dialog
5. Image window
6. Image window menus
UNIT – III
Improving Digital Photos:
Opening files
Rescaling saving files
Cropping
Brightening & Darkening
Rotating
Sharpening
Introduction to layers
2. What is layer?
Using layer to add text
Using move tool
Changing colors
Simple effects on layers
2.5 Performing operations on layers
2.7 Using layers to copy and paste
UNIT –IV
Drawing:
Drawing lines and curves
Changing colors and brushes
Erasing
Drawing rectangles, Circles and other shapes
Outlining and filling regions
Filling with patterns and gradients
UNIT –V
Erasing and Touching Up:
1.1 Dodge and burn tool
Clone tool
Sharpening using convolve tool
Correcting Color Balance
Filters:
Filters
Blur
Enhance
Noise Filters
References:
Textbook: Beginning GIMP from Novice to professional by Akkana Peck, econd Edition, Apress
Course 7D: Digital Imaging LAB
1. Designing a Visiting card

2. Design Cover page of a book
3. Paper add for calling tenders
4. Design a Pamphlet
5. Brochure designing
6. Titles designing
7. Custom shapes creation
8. Image size modification
9. Background changes
10. Texture and patterns designing
Course 7D: Digital Imaging
III BCOM V SEMESTER
SECTION – A
1. Explain about Vector Graphics?
2. Explain about Image Scanner?
3. Explain about GIMP ?
4. Explain about Image window?
5. Write about Cropping?
6. Write about layer?
7. Explain about Drawing lines and curves?
8. Explain about Outlining and filling regions?
9. Explain about Clone tool?
10.Write about Noise Filters?
SECTION – B
UNIT-I
11. Explain about Types of Graphics?
OR
12.Explain about Types of Objects?
UNIT-II
13. Explain about Tool Options Dialog?
OR
14. Explain about Image window menus?
UNIT-III
15. Explain about Improving Digital Photos?
OR
16. Explain about Simple effects on layers?
UNIT-IV
17. Explain about Changing colors and brushes?
OR
18. Explain about Filling with patterns and gradients?
UNIT-V
19. Explain about Erasing and Touching Up?
OR
20. Explain about Filters?

Bos Bcom V Sem 2022-23

Uploaded by

Copyright:

Available Formats

Bos Bcom V Sem 2022-23

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Bos Bcom V Sem 2022-23

Uploaded by

Copyright:

Available Formats

Department of Computer Science/Computer Applications

Constitution of Board of Studies in Computer Applications

Smt. C.V.Krishnaveni., Lecturer in Computer

Smt.M.Manjula Devi., M.Sc. Lecturer in Computer

Smt.M.Lavanya., M.C.A, Lecturer in Computer

Smt.M.Subhanjali Lecturer in Computer

Dear Sir/ Madam,

Smt.C.V.Krishnaveni., Lecturer in Computer

Smt.M.Manjula Devi., Lecturer in Computer

Smt.K.Ramya Smitha., Lecturer in Computer

Smt.P.U.S.Madhuri., Lecturer in Computer

Smt.M.Lavanya., Lecturer in Computer

6A Big data Analytics using 3 100 3

6B Mobile application 3 100 3

6D Multimedia Tools and 3 100 3

Digital imaging Lab 2 50 1

10. Smt.K.Ramya Smitha, Faculty Member

11. Smt.P.U.S.Madhuri, Faculty Member

12 Smt.M.Lavanya, Faculty Member

Department of Computer Science/Computer Applications

13 Smt.M.Subhanjali Faculty Member

CONTINUOUS INTERNAL ASSESSMENT (25 MARKS)

a Written exam 15 marks

EXTERNAL EXAMINATION (75 MARKS)

Time: 3 hrs Max. Marks: 75

13 Smt.M.Subhanjali Faculty Member

Department of Computer Science

SNO NAME OF THE EXAMINER

1 K.H.Sampath Kumar Raju,

Department of Computer Science

Course Learning Outcomes:

Upon successful completion of the course, a student will be able to:

Introduction to Big data : Data, classification Of Digital Data—structured unstructured, semi-structured

Data Visualization using R:

1. An Introduction to R, Notes on R: A Programming Environment for Data Analysis and

1. Create a vector in R and perform operations on it.

Time: 3 Hrs Max Marks: 75

B.Com 5th Semester Computer Applications Syllabus under CBCS

Course Learning Outcomes:

Upon successful completion of the course, a student will be able to:

Control structures and strings:

Functions and modules :

Classes & Objects:

1. Python Program to Find the Square Root

Time: 3 Hrs Max Marks:75 M

B.Com 5th Semester Computer Applications Syllabus under CBCS

Course Learning Outcomes:

Upon successful completion of the course, a student will be able to:

android platform services, Android system Architecture, Android Security model

Introduction of MIT App, Inventor, Application

1. Demonstrate mobile technologies and devices

Time: 3 Hrs Max Marks:75 M

B.Com 5th Semester Computer Applications Syllabus under CBCS

Course Learning Outcomes:

Upon successful completion of the course, a student will be able to:

Introduction to Networks & cyber security :

NIST Cyber security framework:

 Introduction to the components of the framework

 Web application firewall