FB163-A0P_ENG_CI_MFL41599945

6/24/08

6:46 PM

Page 1

FB163-ENG_CI_MFL41599945

ENGLISH http://www.lg.ca

Model: FB163

FB163-A0P_ENG_CI_MFL41599945

6/24/08

6:46 PM

Page 2

Safety Precaution
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. CAUTION concerning the Power Cord Most appliances recommend they be placed upon a dedicated circuit; That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this equipment in a confined space such as a book case or similar unit. CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings should be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instruction has been adhered to.

FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

REGULATORY INFORMATION: FCC Part 15

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

CAUTION: This product employs a Laser System. To ensure proper use of this product, please read this owners manual carefully and retain it for future reference. Should the unit require maintenance, contact an authorized service center. Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM.

Mini Home Theater ] USER GUIDE

FB163-A0P_ENG_CI_MFL41599945

6/24/08

6:46 PM

Page 3

IMPORTANT SAFETY INSTRUCTIONS

1. 2. 3. 4. 5. 6. 7. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

Copyrights It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE STANDARD DEFINITION OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p UNIT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.

13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Mini Home Theater ] USER GUIDE

FB163-A0P_ENG_CI_MFL41599945

6/24/08

6:46 PM

Page 4

Types of Playable Discs

Type
DVD-VIDEO: Discs such as movies that can be purchased or rented. DVD-R: Video mode and finalized only DVD-RW: Video mode and finalized only DVD+R: Video mode only Supports the double layer disc also DVD+RW: Video mode only Audio CD:

About the

Symbol Display

Logo

may appear on your TV display during operation and indicates that the function explained in this owners manual is not available on that specific DVD video disc.

Regional code
This unit has a regional code printed on the rear of the unit. This unit can play only DVD discs labeled same as the rear of the unit or ALL. Most DVD discs have a globe with one or more numbers in it clearly visible on the cover. This number must match your units regional code or the disc cannot play. If you try to play a DVD with a different regional code from your player, the message Check Regional Code appears on the TV screen.

Copyrights
In addition, this unit can play a DVDR/RW and CD-R or CD-RW that contains audio titles, MP3, WMA, JPEG files. Depending on the conditions of the recording equipment or the CD-R/RW (or DVDR/RW) disc itself, some CD-R/RW (or DVDR/RW) discs may not be played on the unit due to the recording quality or physical condition of the disc, or the characteristics of the recording device and authoring software. The disc will not play if it has not been correctly finalized. Player does not support these kinds of discs.
It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE STANDARD DEFINITION OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p AND 625p UNIT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.

Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license from Dolby Laboratories.

Mini Home Theater ] USER GUIDE

FB163-A0P_ENG_CI_MFL41599945

6/24/08

6:46 PM

Page 5

Welcome to your new Mini Home Theater

Contents Safety Precaution . . . . . . . . . . . . . . . . . . .2 Types of Playable Discs . . . . . . . . . . . . . .4 Setting up . . . . . . . . . . . . . . . . . . . . . . . . .6 Main Unit . . . . . . . . . . . . . . . . . . . . . . . . .7 Hooking up the unit . . . . . . . . . . . . . . . . .8 Remote control . . . . . . . . . . . . . . . . . . . . .9 OSD Initial language setting . . . . . . . . . .10 Initial Setting the Area Code . . . . . . . . . .10 Adjust the settings . . . . . . . . . . . . . . .10-11 Displaying Disc Information . . . . . . . . . . .12 Setting the clock . . . . . . . . . . . . . . . . . . .12 Use your player as an alarm clock . . .12-13 Setting the sound mode . . . . . . . . . . . . . .13 Playing a Disc . . . . . . . . . . . . . . . . . .13-14 Playing a DivX Movie file . . . . . . . . . . . . .15 Listening to Audio CD,MP3 or WMA files . .15-16 Viewing photo files . . . . . . . . . . . . .16-17 Listening to the radio . . . . . . . . . . . . . . . .17 Listening to music from your portable player . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Connecting your portable USB player Using iPod mode . . . . . . . . . . . . . . . Using OSD iPod mode . . . . . . . . . . . Language Codes . . . . . . . . . . . . . . . Area Codes . . . . . . . . . . . . . . . . . . . Troubleshooting . . . . . . . . . . . . . . . . Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 .19 .19 .20 .20 .21 .22

Touch Panel Volume Control

Precautions in using the touch buttons Use the touch buttons with clean and dry hands. - In a humid environment, wipe out any moisture on the touch buttons before using. Do not press the touch buttons hard to make it work. - If you apply too much strength, it can damage the sensor of the touch buttons. Touch the button that you want to work in order to operate the function correctly. Be careful not to have any conductive material such as metallic object on the touch buttons. It can cause malfunctions. Mini Home Theater ] USER GUIDE 5

FB163-A0P_ENG_CI_MFL41599945

6/24/08

6:46 PM

Page 6

Setting up
Attaching the speakers to the unit
Connect the wires to the unit.
Match each wires coloured band to the same coloured connection terminal on the reverse of the unit. To connect the cable to the unit, press each plastic finger pad to open the connection terminal. Insert the wire and release the finger pad

Speaker Deco : This part of speaker makes a no sound.

The connector will open ready to receive a cable.

Connect the red end of each wire to the terminals marked +(plus) and the black end to the terminals marked - (minus).

Be careful of the following

COLOUR
Red White

SPEAKER
Front Front

POSITION
In front of you, to the right of the screen In front of you, to the left of the screen

Be careful to make sure children not to put their hands or any objects into the speaker duct. Speaker duct : A hall for plentiful bass sound on speaker cabinet (enclosure).

Remote control Operation Point the Remote Control at the remote sensor and press the buttons. Remote control Battery Installation Detach the battery cover on the rear of the remote control, and insert two R03 (size AAA) batteries with 3 and # aligned correctly. Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.).

Mini Home Theater ] USER GUIDE

FB163-A0P_ENG_CI_MFL41599945

6/24/08

6:46 PM

Page 7

Main unit
FUNC. To select the Functions press FUNC.. (DVD/CD USB OSD IPOD IPOD PORTABLE FM AM ). XDSS Plus (MP3 Optimizer) Reinforce the treble, bass and surround effect,XDSS ON will show in the display,press again for NORMAL. (Page 13)

iPod DOCKING

EQ (EQUALIZER Effect) : You can choose 7 fixed sound impressions.(page 13) Z EJECT Ejects or inserts the CD from the slot loader. CD slot loader - Do not push a disc forcibly. - Do not pull or push a disc while a disc is eject. - Press Z again to reinsert the disc after ejecting it .

1 (STANDBY/ON) Turn on or off. - Power Save Mode You can set up the unit into an economic power save mode. In power-on status, press and hold 1 (STANDBY/ON) button for about 3 seconds. Nothing is displayed in the display window when the unit is turned off.To cancel, press 1 (STANDBY/ON) , CLOCK, TIMER or VSM/DEMO. TIMER (Use your player as a desired time.) CLOCK For setting the clock and checking the time.(see setting the clock) VSM (VIRTUAL SOUND MATRIX ) / DEMO Press DEMO in power off state to demonstrate the function on display window. To cancel it, press 1 or DEMO again. SET confirms the time you have selected when setting the clock. USB connector Connect a remote USB compatible player here.

. or > AUTO TUNING -TUNER / (. or >) SKIP- CD buttons B/]] (PLAY/PAUSE) x STOP button VOLUME Adjustment Moves your finger to inside of touch wheel. (Refer to the page 5.)

PORTABLE IN .For connecting a portable device and playing it through the systems speaker. Headphone jack Connect a headphone plug ( 3.5 mm) into the jack to listen to the sound through headphones (not supplied).

Mini Home Theater ] USER GUIDE

FB163-A0P_ENG_CI_MFL41599945

6/24/08

6:46 PM

Page 8

Hooking up the unit

MONITOR OUT / OUT PUT(COMPONENT /PROGRESSIVE SCAN) connections

MONITOR jack connection

Connect the VIDEO jack on the unit to the corresponding input jacks on your TV using a Video cable.

OUT PUT (COMPONENT VIDEO) jacks connection

Connect one end of the component(Y PB PR )cable to the COMPONENT VIDEO jack on the unit and other end to the COMPONENT INPUT jack on your TV.

Antenna connection
Fit the AM loop aerial to its stand Connect the AM loop aerial to the player. Connect the FM aerial The reception will be at its best when the two loose ends of the aerial are in a straight line and horizontal. 8 Mini Home Theater ] USER GUIDE

FB163-A0P_ENG_CI_MFL41599945

6/24/08

6:46 PM

Page 9

Remote control
a POWER : Switches the unit ON or OFF. MUTE : Press MUTE to mute your unit. You can mute your unit in order, for example, to answer the telephone. c PLAY (N): Starts playback. - 1.5 speed playback The 1.5 speed allows you to watch the pictures and listen to the sound quicker than playing at a normal speed on the disc.- (page 14) - MONO/STEREO FM mode state,selects MONO or STEREO by pressing play button STOP (x): Stops playback or recording. PAUSE/STEP(X): Pause playback. CLEAR: Removes a track number on the Program List. - SCAN (-/+)(bb/BB) : Search backward or forward. . - SKIP (-/+)(. / >): Go to next or previous chapter/ track/Title. PROG./MEMO. : Accesses or removes Program menu. VOLUME (+/-) : Adjusts speaker volume. d REPEAT : Repeats a Chapter/ Track/ Title all. S-TITLE: During playback ,S - TITLE repeatedly to select a desired subtitle language .

FUNCTION : (DVD/CD FM AM) INPUT : Changes the input source (USB OSD IPOD IPOD PORTABLE) SLEEP : You can set the unit to turn off automatically at a specified time. - DIMMER Dims the LED (Light-emitting diode) of front panel by half in power-on status. RETURN (O): Press to move back wards in the menu. EQ (EQUALIZER Effect) : You can choose 7 fixed sound impressions.(page 13)

VSM : Press VSM to set the VIRTUAL sound.(page 13) 0-9 numerical buttons: Selects numbered options in a menu. b SETUP : Accesses or removes setup menu MENU : Accesses the menu on a DVD disc. DISPLAY: Accesses On-Screen Display. TITLE : If the current DVD title has a menu, the title menu appears on the screen. Otherwise, the disc menu may appear. b / B / v / V (left/right/up/down):Used to navigate onscreen displays. SELECT/ENTER : Acknowledges menu selection. PRESET(-/+) (V/v) : Selects programme of Radio. TUN.(-/+) (b/B): Tunes in the desired radio station.

Mini Home Theater ] USER GUIDE

FB163-A0P_ENG_CI_MFL41599945

6/24/08

6:46 PM

Page 10

OSD Initial language setting

After factory setting ,this beginning menu language will only be displayed at DVD or USB mode if you turn on the power at the first time .

Adjust the settings

ON REMOTE
1. Display setup menu: 2. Select a desired option on the first level: 3. Move to second level: 4. Select a desired option on the second level:
vVbB

SETUP
vV B vV B v V and SELECT/ENTER

ON PLAYER 1. Turn the power on: Appear the language list display window 2. Select the language : 3. Press: 4.To confirm press: 1 STANDBY/ON

ON REMOTE 1 POWER

5. Move to third level: 6.Change the setting:

SELECT/ENTER SELECT/ENTER

Adjust the settings - more you can do

Adjust the language settings
OSD Select a language for the Setup menu and on-screen display. Disc Audio/Subtitle/Disc Menu Select a language for the Menu/Audio/Subtitle. [Original]: Refers to the original language in which the disc was recorded. [Others]: To select another language, press number buttons then SELECT/ENTER to enter the corresponding 4-digit number according to the language code list in the reference chapter . If you make a mistake while entering number, press CLEAR to delete numbers then correct it. [OFF] (for Disc Subtitle): Turn off Subtitle.

Initial Setting the Area Code

After factory setting ,To set the Area code you have to as below.

ON REMOTE 1. Display setup menu: 2. Select LOCK menu on the first level: 3. Move to second level: Appears the activated Area code on the second level. 4. Move to third level: 5. Enter the new pass word and then, press: 6. Recheck entered new pass word and then, press: 7. Select a code for a geographic area: After select,Rating and Password will be activated.(page20) SETUP
vV

B B

Adjust the display settings

TV Aspect Select which screen aspect to use based on the shape of your TV screen. [4:3]: Select when a standard 4:3 TV is connected. [16:9]: Select when a 16:9 wide TV is connected. Display Mode If you selected 4:3, youll need to define how you would like widescreen programs and films to be displayed on your TV screen. [Letterbox]: This displays a widescreen picture with black bands at the top and bottom of the screen. [Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary.

Numerical button of 0~ 9 then, SELECT/ENTER Numerical button of 0~ 9 then, SELECT/ENTER

vVbB

10

Mini Home Theater ] USER GUIDE

FB163-A0P_ENG_CI_MFL41599945

6/24/08

6:46 PM

Page 11

Progressive ScanProgressive Scan Video provides the high quality pictures with less flickering. If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set [Progressive Scan] to [On]. Press SELECT/ENTER to comfirm your selection. - If you not press ENTER within 10 seconds it will be [OFF].

Adjust the others settings

DivX (R) Registration - We provide you with the DivX VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX VOD service. For more information, visit www.divx.com/vod. Press SELECT/ENTER when [Select] icon is highlighted and you can view the registration code of the unit. .

Adjust the audio settings

DRC (Dynamic Range Control) Make the sound clear when the volume is turned down (Dolby Digital only). Set to [On] for this effect. Vocal Select [On] to mix karaoke channels into normal stereo. This function is effective for multi-channel karaoke DVDs only.

Adjust the lock settings

To access the lock options, you must enter the 4-digit password. If you have not yet entered a password you are prompted to do so. Enter a 4-digit password. Enter it again to verify. If you make a mistake while entering number, press CLEAR to delete numbers then correct it. If you forget your password you can reset it. Press SETUP and Input 210499. The password has now been cleared. Rating Select a rating level. The lower the level, the stricter the rating. Select [UNLOCK] to deactivate the rating. Password Sets or changes the password for lock settings. [New]: Enter a new 4-digits password using the numerical buttons then press SELECT/ENTER. Enter the password again to confirm. [Change]: Enter the new password twice after entering the current password. Area code Select a code for a geographic area as the playback rating level. This determines which areas standards are used to rate DVDs controlled by the parental lock. See the Area Codes on page 20.

Mini Home Theater ] USER GUIDE

11

FB163-A0P_ENG_CI_MFL41599945

6/24/08

6:46 PM

Page 12

Displaying Disc Information

ON REMOTE
1. Press: 2. Select a item: 3. Adjust the Display menu settings: 4. To return the exit DISPLAY
vV bB

Setting the Clock

ON PLAYER 1. Turn the power on: 2. Press for at least 2 seconds: 3. Choose from either: AM 12:00 (for an am and pm display) or 0:00 (for a 24 hour display) 4. Confirm your selection: 5. Select the hours: 6. Press: 7. Select the minutes: 8. Press: 1 STANDBY/ON CLOCK ON REMOTE 1 POWER

DISPLAY

. or >

Displaying Disc Information - more you can do

You can select an item by pressing vV and change or select the setting by pressing b B. Current title (or track) number/total number of titles (or tracks) Current chapter number/total number of chapters Elapsed playing time Selected audio language or channel Selected subtitle Selected angle/total number of angles Selected Sound mode

SET
. or >

SET
. or >

SET

Use your player as an alarm clock

Press and hold TIMER for two seconds. Each function, TUNER, DVD/CD, USB flashes for two seconds. Press SET when the function you want to be woken by is showing. When you select the TUNER function, select the previously memorized preset number by tapping ./ > on the front panel and press SET. If you choose DVD/CD or USB you will be shown below. You will be shown the ON TIME display. This is where you set the time you want the alarm to go off. Use .or > to change the hours and minutes and SET to save. You will then be shown the OFF TIME display. This is where you set the time you want the function to stop. Use .or > to change the hours and minutes and press SET to save. Next you will be shown the volume (VOL) you want to be woken by. Use .or > to change the volume and SET to save. Switch the system off. The clock icon shows that the alarm is set. When the system is turned off you can check the time the alarm is set for by pressing TIMER. You can also turn the alarm on and off by pressing TIMER. To set the alarm to go off at a different time, switch the system on and reprogramme following the same steps as initially.

Symbol Used in this Manual

All discs and file listed below DVD and finalized DVDR/RW DivX files
ALL DVD DivX

MP3 files WMA files Audio CDs

MP3 WMA ACD

12

Mini Home Theater ] USER GUIDE

FB163-A0P_ENG_CI_MFL41599945

6/24/08

6:46 PM

Page 13

Fall asleep while listening to your player

You can set the unit to turn off automatically at a specified time. Each time you press SLEEP the setting changes in the following order. (DIMMER ON)SLEEP 180 150 12090 80 70 60 50 40 30 20 10 (DIMMER OFF)

Note
When you connect a headphone with 'VSM' chosen, the mode changes into 'BYPASS'. It returns to VSM when you disconnect the headphone.

DIMMER
Press SLEEP once. The LED (Light-emitting diode) of front panel is turned off and the display window will be darken by half. To cancel it, press SLEEP repeatly until dim off.

Playing a Disc
ON PLAYER
1. Insert a Disc: 2. To Start playback: 3. To Stop playback: Z B/]] x B x STOP

ON REMOTE

Setting the sound mode

XDSS Plus (Extreme Dynamic Sound System)
Press XDSS Plus to reinforce treble, bass and the surround effect. The XDSS ON or NORMAL indicator lights. This function optimizes for compressed MP3 files DVD DivX ACD : XDSS ON NORMAL WMA MP3 : XDSS ON MP3 -- OPT ON NORMAL XDSS ON

Playing a Disc - more you can do

Playing a DVD that has a menu
DVD

EQ (EQUALIZER Effect) :
You can choose 7 fixed sound impressions. Each time you press the button the setting changes in the display window as shown below. (AUTO EQ operates only in the MP3/ WMA files which include the Tag information) NATURAL (AUTO EQ ) POP CLASSIC ROCK JAZZ NORMAL...

Most DVD now have menus which load first before the film begins to play. You can navigate these menus using vV b B to highlight an option. Press SELECT/ENTER to select.

Skip to the next/previous chapter/track

ALL

Press SKIP (>) to move to the next chapter/track. Press SKIP (.) to return to the beginning of the current chapter/track. Press SKIP (.) twice briefly to step back to the previous chapter/track.

Note
When you connect a headphone to set with one of the EQ modes chosen, the EQ button does not work. When you connect a headphone with 'regional EQ' chosen, the mode changes into 'NORMAL'. It returns to regional EQ when you disconnect the headphone.

Pause a playback

ALL

Press PAUSE/STEP (X) to pause playback. Press PLAY ( N) to continue playback.

Frame-by-Frame playback

DVD

DivX

Press PAUSE/STEP (X) repeatedly to play Frame-by-Frame playback.

VSM (VIRTUAL SOUND MATRIX ) : Press VSM to set the virtual sound or to change sound mode repeatly. - When you press the Rec button during VSM, appointed sound mode return to BYPASS. 2.1Ch source : 3D STEREO Realtime 3D positioned sound rendering technology with stereo sources, optimized for stereo speakers. Listeners may experience amazing virtual surround effects with their own multimedia players. BYPASS VIRTUAL ON STAGE

Playing repeatedly

ALL

Press REPEAT repeatedly to select an item to be repeated. The current title, chapter or track will be played back repeatedly. To return to normal playback, press REPEAT repeatedly to select [Off]. DivX : Track All Off ACD WMA MP3 :TRACK ALL [OFF No display ] DVD :Chapter Title Off

Mini Home Theater ] USER GUIDE

13

FB163-A0P_ENG_CI_MFL41599945

6/24/08

6:46 PM

Page 14

Last Scene Memory Selecting a subtitle language

During playback, press S-TITLE ( guage.
DVD DivX

DVD

) repeatedly to select a desired subtitle lan-

This unit memorizes last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the player or switch off the unit. If you load a disc that has the scene memorized, the scene is automatically recalled.

Fast forward or fast reverse

DVD DivX ACD WMA MP3

Screen Saver
The screen saver appears when you leave the unit in Stop mode for about five minutes.

Press SCAN (m or M) to play fast forward or fast reverse during playback. You can change the various playback speed by pressing SCAN (m or M) repeatedly. Press PLAY ( N) to continue play at normal speed.

Mixed disc or USB Flash Drive DivX, MP3/WMA and JPEG

When playing a disc or USB Flash Drive contained with DivX, MP3/WMA and JPEG files together, you can select which menu of files you would like to play by pressing TITLE.

Watch and listen 1.5 times faster

DVD

ACD

WMA

MP3

Press PLAY when a disc is already playing to watch and listen to a DVD 1.5 times faster than normal playback speed. B x1.5 will appear on the screen. Press PLAY again to return to normal playback speed.

Slow down the playing speed

DVD

While playback is paused, press SCAN (M) to slow down forward playback. You can change the various playback speed by pressing SCAN (M) repeatedly. Press PLAY ( N) to continue play at normal speed. DVD disc can operate Slow down Forward/ Reverse playback only.

Viewing the title menu

DVD

Press TITLE to display the disc's title menu, if available.

Viewing the DVD menu

DVD

Press MENU to display the disc menu, if available.

Starting play from selected time

DVD

DivX

Searches for the starting point of entered time code. Press DISPLAY then select clock icon. Enter a time then press SELECT/ENTER. For example, to find a scene at 1 hours, 10 minutes, and 20 seconds, enter "11020" and press SELECT/ENTER. If you enter the wrong number, press CLEAR to enter again.

14

Mini Home Theater ] USER GUIDE

FB163-A0P_ENG_CI_MFL41599945

6/24/08

6:46 PM

Page 15

Playing a DivX movie file

ON PLAYER
1. Insert a Disc: 2. Select a movie file from the menu: 3. To Start playback: 4. To Stop playback: Z
./>

Listening to Audio CD, MP3 or WMAfiles

ON REMOTE
1. Insert a Disc: vV SELECT/ENTER x STOP 2. Select a music file from the menu: 3. To Start playback: 4. To stop playback:

ON PLAYER
Z
./>

ON REMOTE
vV B PLAY x STOP

B/]] x

B/]] x

Playing a DivX movie file - more you can do

Changing the character set to display DivX subtitle correctly
If the subtitle dose not display properly,press and hold S-TITLE button about 3seconds to display the language code menu and then,press S-TITLE button repeatly to change the language code until the subtitle is displayed properly. DivX disc compatibility with this player is limited as follows: Available resolution size of the DivX file is under 800x600 (W x H) pixel. The file name of the DivX subtitle is available by 45 characters. If there is impossible code to express in the DivX file, it may be displayed as " _ " mark on the display. If the number of the screen frame is over 30 per 1 second, this unit may not operate normally. If the video and audio structure of recorded files are not interleaved, either video or audio is outputted. Playable DivX file : ".avi ", ".mpg ", ".mpeg ", ".divx" Playable Subtitle format : SubRip(*.srt/*.txt) ,SAMI(*.smi), SubStation Alpha(*.ssa/*.txt) MicroDVD(*.sub/*.txt) SubViewer 2.0(*.sub/*.txt) VobSub(*.sub) Playable Codec format : "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "MP43 ", "3IVX ". Playable Audio format : "AC3 ", "PCM ", "MP3 ", "WMA ". Sampling frequency: within 32 - 48 kHz (MP3),within 32 - 48kHz (WMA) Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA)

Listening to Audio CD, MP3 or WMA files more you can do

Creating your own program You can play the contents of a disc in the order you want by arranging the order of the musics on the disc. The program is cleared when the disc is removed. Select a desired music then press PROG. or select and then press SELECT/ENTER to add the music to the program list. To add all music in the disc, select and then press SELECT/ENTER. Select a music from the program list then press SELECT/ENTER to start programmed playback.To clear a music from the program list, select the music you want to clear then press CLEAR or select icon and then press SELECT/ENTER. To clear all music from the program list, select " " then press SELECT/ENTER.

Mini Home Theater ] USER GUIDE

15

FB163-A0P_ENG_CI_MFL41599945

6/24/08

6:46 PM

Page 16

Displaying file information (ID3 TAG )

While playing a MP3 file containing file information, you can display the information by pressing DISPLAY repeatedly. MP3 / WMA disc compatibility with this player is limited as follows: Sampling frequency: within 32 - 48 kHz (MP3), within 24 - 48kHz (WMA) Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA) The unit cannot read an MP3/WMA file that has a file extension other than .mp3 / .wma. CD-R physical format should be ISO 9660 If you record MP3 / WMA files using software that cannot create a file system (eg. Direct-CD) it is impossible to playback MP3 / WMA files.We recommend that you use Easy-CD Creator, which creates an ISO 9660 file system. File names should have a maximum of 8 letters and must incorporate an .mp3 or .wma extension. They should not contain special letters such as / ? * : < > l etc. The total number of files on the disc should be less than 999. This unit requires discs and recordings to meet certain technical standards in order to achieve optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain pre-existing conditions (see above) to ensure compatible playback. Customers should note that permission is required in order to download MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner.

Viewing photo files

ON PLAYER
1. Insert a Disc: 2. Select a photo file on the menu: 3. Select a photo file on the menu: 4. Display the selected file in full screen: 5. To stop playback: B/]] x SELECT/ENTER x STOP Z ./> vV

ON REMOTE

Viewing photo files - more you can do

Viewing photo files as a slide show
Use vV b B to highlight ( show. ) icon then press SELECT/ENTER to start slide ) icon is highlighted.

You can change slide show speed using b B when (

Skip to the next/previous photo

Press SKIP (. or >) to view the previous/next photo.

Rotate a photo
Use vV b B to rotate the photo in full screen.

Pause a slide show

Press PAUSE/STEP (X) to pause a slide show. Press PLAY to continue the slide show.

16

Mini Home Theater ] USER GUIDE

FB163-A0P_ENG_CI_MFL41599945

6/24/08

6:46 PM

Page 17

JPEG disc compatibility with this player is limited as follows:

Depending upon the size and the number of JPEG files, it could take a long time for the this unit. to read the discs contents. If you dont see an onscreen display after several minutes, some of the files may be too large reduce the resolution of the JPEG files to less than 2M pixels as 2760 x 2048 pixels and burn another disc. The total number of files and folders on the disc should be less than 999. Some discs may not operate due to a different recording format or the condition of disc. Ensure that all the selected files have the .jpg extensions when copying into the CD layout. If the files have .jpe or .jpeg extensions, please rename them as .jpg file. File names without .jpg extension will not be able to be read by this unit. Even though the files are shown as JPEG image files in Windows Explorer.

Listening to the radio - more you can do

Look for radio stations automatically
Press ./> on the front panel (or press TUN.- /TUN.+ on the remote control) for more than 0.5 second. The tuner will scan automatically and stop when it finds a radio station.

Delete all the saved stations

Press and hold PROG./MEMO. for two seconds. ERASE ALL shows. Press PROG./MEMO. to erase all the saved stations. Choose a preset number for a radio station Select a station you want by pressing ./> on the front panel or TUN.- /TUN.+ on the remote control. Press PROG./MEMO., the station flashes. Press PRESET (+/-)on the remote control to select the preset number you want. Press PROG./MEMO. to save it. Improve poor FM reception Press PLAY B on the remote control This will change the tuner from stereo to mono and usually improve the reception.

Listening to the radio

ON PLAYER 1. Select FM/ AM: 2. Select the radio station: 3. To save a radio station: A preset number will show in the display 4. To select a saved station: 5. To confirm press: Up to 50 radio stations can be saved FUNC. ./> ON REMOTE FUNCTION TUN.- / TUN.+ PROG./MEMO. PRESET(+/-) PROG./MEMO.

Mini Home Theater ] USER GUIDE

17

FB163-A0P_ENG_CI_MFL41599945

6/24/08

6:46 PM

Page 18

Listening to music from your portable player

Connecting your portable USB player

The advantage of connecting your portable USB player through the systems USB port is that the portable device can be controlled from the system. Connect the portable player to the system using a USB cable (not supplied). ON PLAYER 1. Select the USB function: 2. The display will show SEARCHING, followed by the number of files displayed: 3. Select a Title MENU 4. Start selected file 5. Before disconnecting the portable USB player, change to any other function by pressing: 6. Remove the USB player Compatible USB Devices
Devices which require additional program installation when you have connected it to a computer, are not supported. MP3 Player : Flash type MP3 player. The MP3 player requiring installation of a driver is not supported. USB Flash Drive : Devices that support USB2.0 or USB1.1.

The player can be used to play the music from many types of portable player.

ON REMOTE INPUT

FUNC.

ON PLAYER 1. Connect the portable player by plugging the unit into PORTABLE IN on the side of the player: 2. Turn the power on: 3. Select the PORTABLE function: 4. Turn the portable player on and start it playing: 1 STANDBY/ON FUNC.

ON REMOTE

B/]]

TITLE SELECT/ENTER FUNCTION or INPUT

1 POWER INPUT

FUNC.

USB device requirement

Do not extract the USB device in operating. A back up demands to prevent a data damage. If you use a USB extension cable or USB hub, the USB device might not be recognized. A device using NTFS file system is not supported. (Only FAT (16/32) file system is supported.) The USB function of this unit does not support all USB devices. Digital camera and mobile phone are not supported. This unit is not supported when the total number of files is 1000 or more. If the drive of USB device is two or more, a drive folder is displayed on the screen. If you want to move to the previous menu after you select a folder, press RETURN.

18

Mini Home Theater ] USER GUIDE

FB163-A0P_ENG_CI_MFL41599945

6/24/08

6:46 PM

Page 19

Using iPod mode

You can listen to the music by connecting iPod to iPod DOCK on the upper part of the player. iPod will not be charged when selecting the iPod mode .but you can enjoy better sound quality.

NOTES :
It works with all iPod models that have a dock connector. Compatibility with your iPod may vary depending on the type of your iPod. Depending on your iPods software version, it may not be possible to control your iPod from the unit. We recommend installing the latest software version. Adjust the volume to a moderate level before you connect your iPod and this unit. MIC function is not supported on the iPOD mode.

Using OSD iPod mode

If you want to charge the iPod while listening music,selects the OSD iPod mode. ON PLAYER 1. Select the IPOD OSD function: IPOD displays 2. To select the music menu list : (Playlist,Artists,Albums...) 3. Comfirms selected menu: 4. Selects file list and then confirm: 5.To stop press: To move the previous mode , press the MENU button on the remote control. Music Classifies and plays the files by Playlists, Artists, Albums, Genres, Songs, and Composers. iPod message If the power of your iPod is insufficient or the iPod is misconnected or unknown device, the screen on the left appears. Reset the iPod,If the iPod is not operated normally (Refer to http://www.apple.com/support/)

1. Select the iPod function: 2. IPOD displays : 3. Start the playing : 4. Before disconnecting the iPod ,change to any other function by pressing: 5. Remove iPod:

ON PLAYER FUNC. B/]] FUNC.

ON REMOTE INPUT B FUNCTION or INPUT

ON REMOTE INPUT
vV

FUNC.

SELECT/ENTER
vV and

SELECT/ENTER x

Playing in the Remote iPod mode - more you can do

You can operate your iPod by using the supplied remote control and controls on your iPod. Press INPUT on the Remote Control until IPOD appears in the display window. Use v / V and SELECT/ENTER on the Remote Control or controls on your iPod to display the list of menu by viewing your iPod. Press SELECT/ENTER to play. When you connect the unit and TV to VIDEO IN/OUT, TV screen is turned off. iPodTV Can be outputted only in the devices :iPod photo and 5G iPod. Interference may happen depending on iPod devices. This unit not supported the video output for iPod device.

Mini Home Theater ] USER GUIDE

19

FB163-A0P_ENG_CI_MFL41599945

6/24/08

6:46 PM

Page 20

Language Codes
Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Language Afar Afrikaans Albanian Ameharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali, Bangla Bhutani Bihari Breton Bulgarian Burmese Byelorussian Chinese Code 6565 6570 8381 6577 6582 7289 6583 6588 6590 6665 6985 6678 6890 6672 6682 6671 7789 6669 9072 Language Croatian Czech Danish Dutch English Esperanto Estonian Faroese Fiji Finnish French Frisian Galician Georgian German Greek Greenlandic Guarani Gujarati Code 7282 6783 6865 7876 6978 6979 6984 7079 7074 7073 7082 7089 7176 7565 6869 6976 7576 7178 7185 Language Hausa Hebrew Hindi Hungarian Icelandic Indonesian Interlingua Irish Italian Javanese Kannada Kashmiri Kazakh Kirghiz Korean Kurdish Laothian Latin Latvian, Lettish Code 7265 7387 7273 7285 7383 7378 7365 7165 7384 7487 7578 7583 7575 7589 7579 7585 7679 7665 7686 Language Lingala Lithuanian Macedonian Malagasy Malay Malayalam Maori Marathi Moldavian Mongolian Nauru Nepali Norwegian Oriya Panjabi Pashto, Pushto Persian Polish Portuguese Code 7678 7684 7775 7771 7783 7776 7773 7782 7779 7778 7865 7869 7879 7982 8065 8083 7065 8076 8084 Language Quechua Rhaeto-Romance Rumanian Russian Samoan Sanskrit Scots Gaelic Serbian Serbo-Croatian Shona Sindhi Singhalese Slovak Slovenian Spanish Sudanese Swahili Swedish Tagalog Code 8185 8277 8279 8285 8377 8365 7168 8382 8372 8378 8368 8373 8375 8376 6983 8385 8387 8386 8476 Language Tajik Tamil Telugu Thai Tonga Turkish Turkmen Twi Ukrainian Urdu Uzbek Vietnamese Volapk Welsh Wolof Xhosa Yiddish Yoruba Zulu Code 8471 8465 8469 8472 8479 8482 8475 8487 8575 8582 8590 8673 8679 6789 8779 8872 7473 8979 9085

Area Codes
Choose a area code from this list.
Area Afghanistan Argentina Australia Austria Belgium Bhutan Bolivia Brazil Cambodia Canada Chile China Colombia Congo Code AF AR AU AT BE BT BO BR KH CA CL CN CO CG Area Costa Rica Croatia Czech Republic Denmark Ecuador Egypt El Salvador Ethiopia Fiji Finland France Germany Great Britain Greece Code CR HR CZ DK EC EG SV ET FJ FI FR DE GB GR Area Greenland Hong Kong Hungary India Indonesia Israel Italy Jamaica Japan Kenya Kuwait Libya Luxembourg Malaysia Code GL HK HU IN ID IL IT JM JP KE KW LY LU MY Area Maldives Mexico Monaco Mongolia Morocco Nepal Netherlands Netherlands Antilles New Zealand Nigeria Norway Oman Pakistan Panama Code MV MX MC MN MA NP NL AN NZ NG NO OM PK PA Area Paraguay Philippines Poland Portugal Romania Russian Federation Saudi Arabia Senegal Singapore Slovak Republic Slovenia South Africa South Korea Spain Code PY PH PL PT RO RU SA SN SG SK SI ZA KR ES Area Sri Lanka Sweden Switzerland Taiwan Thailand Turkey Uganda Ukraine United States Uruguay Uzbekistan Vietnam Zimbabwe Code LK SE CH TW TH TR UG UA US UY UZ VN ZW

20

Mini Home Theater ] USER GUIDE

FB163-A0P_ENG_CI_MFL41599945

6/24/08

6:46 PM

Page 21

Troubleshooting
Symptom POWER No power RADIO No sound Some noise occurs. The function switch is not set to the Radio mode. There are electronic devices near the player. The antenna is positioned or connected poorly. Set the switch to the Radio mode. Set the player far from the devices. Check the anntena connection and adjust its position. Cause The power cord is not plugged in. Correction Plug in the power cord.

DVD/CD The unit does not start playback No picture An unplayable disc is inserted. The disc is placed upside down. The disc is not placed within the guide. The TV is not set to receive the video signal. Insert a playable disc. Place the disc with the playback side down. Place the disc on the disc tray correctly inside the guide. Clean the disc. Select the apporate video input model on the TV so the picture from the unit appears on the TV.

REMOTE CONTROL

The remote control does not work properly.

The remote control is not pointed at the remote sensor of the unit directly.

Point the remote control the remote sensor directly of the unit.

The batteries in the remote control are exhausted. iPod iPod does not work.

Replace the batteries with new ones.

Check wheather the player is connected to the unit Correctly .

Connect it to the unit correctly.

Mini Home Theater ] USER GUIDE

21

FB163-A0P_ENG_CI_MFL41599945

6/24/08

6:46 PM

Page 22

Specifications
General

Power supply Power consumption Net Weight External dimensions (W x H x D) Operating conditions Operating humidity
Tuner

Refer to main label. Refer to main label. 3.31 kg 170 x 253 x 265 mm Temperature: 5C to 35C, Operation status: Horizontal 5% to 85% 87.5 - 108.0 MHz or 65.0 - 74.0 MHz, 87.5 - 108.0 MHz 10.7 MHz 522 - 1,620 kHz or 520 - 1,720 kHz 450 kHz

FM Tuning Range Intermediate Frequency AM Tuning Range Intermediate Frequency

Amplifier

OUTPUT POWER Stereo Mode Frequency Response

Signal-to-noise ratio DVD/CD player Frequency response (audio) Signal-to-noise ratio (audio) Signal-to-noise ratio (video) Dynamic range (audio) Video output Component Video output Speakers

80 W + 80 W (4, THD 0.5%) 80 W + 80 W (4, THD 0.5%) 40 - 20000Hz 75dB

40 - 20000 Hz More than 75 dB (1 kHz) More than 75 dB (1 kHz) More than 75 dB 1.0 V (p-p), 75 (Y) 1.0 V (p-p), 75 (Pb)/(Pr) 0.7 V (p-p), 75

Type Impedance Rated Input Power Max. Input Power Net Dimensions (W x H x D) Net Weight

FBS163V 3 Way 3 Speaker 4 80 W 160W 132 x 286 x 253 mm 4.3 kg

Designs and specifications are subject to change without pior notice. 22 Mini Home Theater ] USER GUIDE

FB163-A0P_ENG_CI_MFL41599945

6/24/08

6:46 PM

Page 23

P/NO : MFL41599945