This document is a typical inspection plan for below grade conduit and duct bank projects. It outlines 6 items to be inspected during various project phases, including document review, receiving inspections, storage and handling of materials, and inspections during fabrication. Inspections include reviewing shop drawings, examining bulk materials upon receipt, checking storage areas weekly, and holding points to inspect formwork, rebar and embedded items before concrete placement. The plan specifies the quality procedures and records to be used for each inspection.
This document is a typical inspection plan for below grade conduit and duct bank projects. It outlines 6 items to be inspected during various project phases, including document review, receiving inspections, storage and handling of materials, and inspections during fabrication. Inspections include reviewing shop drawings, examining bulk materials upon receipt, checking storage areas weekly, and holding points to inspect formwork, rebar and embedded items before concrete placement. The plan specifies the quality procedures and records to be used for each inspection.
This document is a typical inspection plan for below grade conduit and duct bank projects. It outlines 6 items to be inspected during various project phases, including document review, receiving inspections, storage and handling of materials, and inspections during fabrication. Inspections include reviewing shop drawings, examining bulk materials upon receipt, checking storage areas weekly, and holding points to inspect formwork, rebar and embedded items before concrete placement. The plan specifies the quality procedures and records to be used for each inspection.
This document is a typical inspection plan for below grade conduit and duct bank projects. It outlines 6 items to be inspected during various project phases, including document review, receiving inspections, storage and handling of materials, and inspections during fabrication. Inspections include reviewing shop drawings, examining bulk materials upon receipt, checking storage areas weekly, and holding points to inspect formwork, rebar and embedded items before concrete placement. The plan specifies the quality procedures and records to be used for each inspection.
Pre-cast Duct banks, Manholes and QC Personnel to review 100% of the drawings according Handholes Shop Drawing Review (Offsite to Aramco Engineering Standards, Standard Drawings 1.1 Fabrication) (Ductbank SAIC-P-3334 SAIC-P-3334 H R and International Standards as applicable, prior to Fabrication (Pre-Cast and Cast in Place)) release for site reference.
Pre-cast Duct banks, Manholes and
QC Personnel to review 100% of the drawings according Handholes Shop Drawing Review (Offsite to Aramco Engineering Standards, Standard Drawings 1.2 Fabrication) Manhole / SAIC-P-3335 SAIC-P-3335 H R and International Standards as applicable, prior to Handhole Fabrication release for site reference. (Pre-Cast and Cast in Place) RECEIVING 2.0 INSPECTION Bulk Material for Duct Bank, Manholes, Handholes Storage, Handling and Preservation 2.1 Visual Inspection SAIC-P-3310 SAIC-P-3310 W2 S QC personnel to inspect storage area weekly (Offsite & Onsite Fabrication) for Conduit and Fittings
Bulk Material for
Duct Bank, Manholes, Handholes Also see SATIP-P-111-01 Grounding and Bonding Material Receiving 2.2 Visual Inspection SAIC-P-3005 SAIC-P-3005 W2 S QC personnel to inspect 50% of deliveries on receipt by fabricator / jobsite. (Offsite & Onsite Fabrication) for Channel, Strut & Support Materials
Bulk Material for
Duct Bank, Manholes, Handholes Also see SATIP-P-111-01 Grounding and Bonding Material Receiving 2.3 Visual Inspection SAIC-P-3311 SAIC-P-3311 W2 S QC personnel to inspect 50% of deliveries on receipt by fabricator / jobsite. (Offsite & Onsite Fabrication) for GRS Conduit and Fittings
Page 1 of 4 03/09/2022 3:35 PM SAUDI ARAMCO ID/PID - 18-MAY-05 - REV 0 (Standards Cutoff - MARCH 2013) Rev 7 31-Mar-13
SAUDI ARAMCO TYPICAL INSPECTION PLAN SATIP No. APPROVED DATE DISCIPLINE:
Below Grade Conduit and Duct Bank SATIP-P-104-07 30-Apr-13 Electrical
Duct Bank, Manholes, Handholes Also see SATIP-P-111-01 Grounding and Bonding Material Receiving 2.4 Visual Inspection SAIC-P-3328 SAIC-P-3328 W2 S QC personnel to inspect 50% of deliveries on receipt by fabricator / jobsite. (Offsite & Onsite Fabrication) for PVC Plastic Conduit and Fittings
Pre-cast Duct Banks,
Manholes and Handholes 2.5 Storage, Handling and Preservation SAIC-P-3327 SAIC-P-3327 W2 S Weekly inspection by Contractor QC personnel. (Offsite Fabrication)
Pre-Cast Duct Banks,
Manhole, and Handholes QC hold point for inspection of formwork, rebar, conduit 2.6 Initial Visual Inspection SAIC-P-3334 SAIC-P-3334 H W2 spacers, and embedded hardware prior to concrete (Offsite Fabrication) for Duct Bank placement. Fabrication
Pre-Cast Duct Banks,
Manhole, and Handholes QC hold point for inspection of formwork, rebar, conduit 2.7 Initial Visual Inspection SAIC-P-3335 SAIC-P-3335 H W2 spacers, and embedded hardware prior to concrete (Offsite Fabrication) for Manhole / Hand- placement. hole Fabrication
Pre-Cast Duct Banks,
Manhole, and Handholes QC hold point for conduit mandrel test and inspection of 2.8 Final Visual Inspection SAIC-P-3334 SAIC-P-3334 H W2 fabricated product prior to shipping to jobsite. (Offsite Fabrication) for Duct bank Receiving
Pre-Cast Duct Banks,
Manhole, and Handholes QC hold point for conduit mandrel test and inspection of 2.9 Final Visual Inspection SAIC-P-3335 SAIC-P-3335 H W2 fabricated product prior to shipping to jobsite. (Offsite Fabrication) for Manhole / Hand- hole Receiving
3.0 INSTALLATION
Electrical Duct Bank & Conduit
3.1 Excavation and Trenching SAIC-P-3333 SAIC-P-3333 H W1 Visual Inspection
Page 2 of 4 03/09/2022 3:35 PM SAUDI ARAMCO ID/PID - 18-MAY-05 - REV 0 (Standards Cutoff - MARCH 2013) Rev 7 31-Mar-13
SAUDI ARAMCO TYPICAL INSPECTION PLAN SATIP No. APPROVED DATE DISCIPLINE:
Below Grade Conduit and Duct Bank SATIP-P-104-07 30-Apr-13 Electrical
Direct Buried Conduit QC hold point for conduit mandrel test and inspection of 3.2 Visual Inspection SAIC-P-3331 SAIC-P-3331 H W1 installed conduit prior to backfilling.
Jobsite Fabricated Electrical Duct Banks, QC hold point for inspection of formwork, rebar, conduit 3.3 Manholes, and Handholes SAIC-P-3334 SAIC-P-3334 H W2 spacers, and embedded hardware prior to concrete Initial Visual Inspection for Duct Bank placement. Fabrication
Jobsite Fabricated Electrical Duct Banks, QC hold point for inspection of formwork, rebar, conduit 3.4 Manholes, and Handholes SAIC-P-3335 SAIC-P-3335 H W2 spacers, and embedded hardware prior to concrete Initial Visual Inspection for Manhole / placement. Handhole Fabrication
Jobsite Fabricated Electrical Duct Banks, QC hold point for inspection of formwork, rebar, conduit 3.5 Manholes, and Handholes SAIC-P-3337 SAIC-P-3337 H W2 spacers, and embedded hardware prior to concrete Initial Visual Inspection for Duct Bank placement. Grounding and Bonding
Jobsite Fabricated and Pre-cast
Electrical Duct Banks, Manholes, QC hold point for conduit mandrel test, ground resistance 3.6 and Handholes SAIC-P-3334 SAIC-P-3334 H W2 test, and inspection of completed product prior to Final Visual Inspection for Duct Bank backfilling. Fabrication
Jobsite Fabricated and Pre-cast
Electrical Duct Banks, Manholes, QC hold point for conduit mandrel test, ground resistance 3.7 and Handholes SAIC-P-3335 SAIC-P-3335 H W2 test, and inspection of completed product prior to Final Visual Inspection for Manhole / backfilling. Handhole Fabrication
Jobsite Fabricated and Pre-cast
Electrical Duct Banks, Manholes, QC hold point for conduit mandrel test, ground resistance 3.8 and Handholes SAIC-P-3337 SAIC-P-3337 H W1 test, and inspection of completed product prior to Final Visual Inspection for Duct Bank backfilling. Grounding and Bonding
Backfilling SA PID shall be notified prior to start the activity and
3.9 Visual Inspection SAIC-P-3333 SAIC-P-3333 H H release the trench for backfilling.
Page 3 of 4 03/09/2022 3:35 PM SAUDI ARAMCO ID/PID - 18-MAY-05 - REV 0 (Standards Cutoff - MARCH 2013) Rev 7 31-Mar-13
SAUDI ARAMCO TYPICAL INSPECTION PLAN SATIP No. APPROVED DATE DISCIPLINE:
Below Grade Conduit and Duct Bank SATIP-P-104-07 30-Apr-13 Electrical
Conduit Identification and Termination SA PID shall be notified on start of this activity for each 3.10 Visual Inspection SAIC-P-3336 SAIC-P-3336 H W2 duct bank.
4.0 PRE-COMMISSIONING
See 4.1 Ground Resistance Testing See Remarks SATIP-P-111-01 Grounding and Bonding Remarks
GENERAL NOTES
The first three incidents of each Inspection or testing activity listed require 100 % participation by Saudi Aramco Site Inspection Personnel. After this period, Saudi Aramco Inspection may adjust the 1 levels of Saudi Aramco participation based upon the Contractor’s performance. 2 Surveillance: QA/QC organization to monitor work in progress without notice from Construction Organization Witness: QA/QC organization shall be notified of the timing of Inspection or test in advance. However, the inspection or test shall be performed as scheduled if the QA/QC organization 3 representative is not present. Hold: QA/QC organization shall be notified of the timing of inspection or test in advance. Inspection or test shall not be carried out without the QA/QC organization representative 4 in attendance. 5 If the Main Contractor delegates the assigned responsibility to the Subcontractor, then the Main Contractor will have the same degree of responsibility as assigned to Saudi Aramco.
LEGEND H Hold Point for QC Inspection/ Test (See Note) R Review of Documents W1 100% Witness Inspection/Test RH Review and Approval of Documents W2 Sample Witness Inspection/Test I 100% Contractor Inspection S Surveillance Note: Aramco user to change in type of activity.
