Create Silky Smooth Waterfalls in Photoshop

Create Silky Smooth Waterfalls In
Photoshop
Written by Steve Patterson.
In this Photoshop Effects tutorial, we’re going to look at how to give waterfalls a silky smooth appearance, as
if the photo was taken with a longer exposure which would normally require the use of a neutral density filter.
Download our tutorials as print-ready PDFs! Learning Photoshop has never been easier!
Here’s the photo I’ll be starting with:
The original image.
And here’s the finished “silky smooth” effect:

The final result.
Let’s get started!
Step 1: Draw A Selection Around The Waterfall

With your image open in Photoshop, grab your Lasso Tool from the Tools palette:
Select the Lasso tool from the Tools palette.
You can also press the letter L on your keyboard to quickly select it.
Then, with the Lasso tool selected, drag a selection around your waterfall. It doesn’t have to be surgically
precise, but try not to stray too far from the edges of the waterfall:
Use the Lasso tool to drag a selection around the waterfall.
Step 2: Copy the Selection Onto Its Own Layer

With the waterfall selected, use the keyboard shortcut Ctrl+J (Win) / Command+J (Mac) to copy it onto its
own layer above the Background layer. You won’t see anything happen in the document window, but if you
look in the Layers panel, you’ll see the waterfall on a new layer:
Press “Ctrl+J” (Win) / “Command+J” (Mac) to copy the waterfall onto a new layer.
Step 3: Apply The Motion Blur Filter To The New Layer

With our waterfall now copied to its own layer, we can create our "silky smooth" effect by applying the
Motion Blur filter to it. To do that, go up to the Filter menu at the top of the screen, select Blur, and then
select Motion Blur. This brings up the Motion Blur dialog box:
Photoshop’s “Motion Blur” dialog box.
Adjust the Angle of the blur so it matches the angle at which the water is falling. In most cases, this would
be 90°, since water would normally fall straight down. In my case, since the water is rushing so quickly over
the edge, it’s actually falling at a bit of an angle, so I’ve set my blur angle to -77°. The easiest way to match
your blur angle to the water is to click inside the Angle value box and then increase or decrease the value one
degree at a time using theup or down arrow keys on your keyboard, which is what I’ve done.
Once you’ve set the correct angle, drag the Distance slider at the bottom until your waterfall looks nice and
silky. I’ve dragged mine to a value of 73 pixels, which gives me a nice effect.
Here’s my image after applying the Motion Blur filter:
The image after applying Motion Blur.
Step 4: Add A Layer Mask To The Waterfall Layer

The motion blur effect looks nice, but it needs a little cleaning up since the blur is extending outside the edges
of the waterfall. We can clean it up easily using a layer mask. To do that, with the waterfall layer selected,
click on theLayer Mask icon at the bottom of the Layers panel:
Clicking the Layer Mask icon.
This adds a layer mask to the layer, and you can see the layer mask thumbnail on the layer:
A layer mask thumbnail appears.
Step 5: Paint With Black On The Layer Mask To Clean Up The Blur Effect
Press D on your keyboard to quickly reset your Foreground and Background colors, so black becomes your
Foreground color. Then grab your Brush Tool from the Tools panel:
Select the Brush tool from the Tools palette.
You can also press B on your keyboard to quickly select it.

Then, with black as your foreground color, which is the color your brush paints with, paint away any unwanted
blurred areas around the waterfall, most of which will be along the top and bottom. Use a soft-edged brush for
best results. You can resize your brush as needed using the left and right bracket keys ( [ and ] ) on your
keyboard, and you can soften or harden the brush by holding down the Shift key and using the bracket keys.
With the Shift key down, pressing the left bracket key softens the brush edge, and pressing the right bracket
key hardens it. Paint over any unwanted blurred areas. Since we’re using a layer mask, any areas you paint
over with black will disappear.
Here’s my image after painting along the top and bottom of the waterfall to remove the blur from those areas:
The image after cleaning up the areas around the waterfall by painting with black on the layer mask.
In most cases, you could stop here and your effect would be complete, but in my case, there’s a bit of a
problem. The water is rushing so quickly and powerfully over the edge that it’s not falling straight down. It’s
actually falling on a bit of a curve. We can’t create curved blurs with the Motion Blur filter, but if you’re using
Photoshop CS2 or later, we can still add a curve quite easily, which I’ll do next.
Step 6: Use The Warp Tool To Curve The Blur Effect If Needed
In Photoshop CS2, Adobe introduced us to the Warp tool, which as the name implies allows us to easily warp
and distort images. I’m going to use it to give my blur effect a bit of a curve so it more closely follows the path
of the water as it rushes over the edge of the cliff. To do that, with my waterfall layer still selected in the
Layers panel, I’ll go up to the Edit menu at the top of the screen, then I’ll choose Transform, and then Warp.
A grid appears over my waterfall, with a hollow square (called a “corner point”) in each corner and a handle
sticking out from either end of the corner points:
Go to Edit > Transform > Warp to bring up the Warp grid around the waterfall.
To create a bit of a curve in my blurring effect, I’m first going to click on the handle that’s extending out
below the top left corner point and drag it down and to the right:
Drag any of the handles to create curves in the blur effect as needed.
That adds a slight curve to the left side. To add a curve to the right side as well, I’ll just click inside the right
middle grid section and drag towards the right. You can see the vertical grid lines bending as I drag:
Dragging the right middle grid section towards the right to add a curve to the blur effect on the right side of the waterfall.
My blur effect how has a curve to it, but after creating the curve, the left edge of my blur effect no longer
reaches the left edge of the waterfall itself. It’s been pushed in a bit too far to the right. To compensate for that,
all I need to do is click my mouse anywhere inside the left middle grid section and drag back towards the left
until the edge of my blur reaches the edge of the waterfall once again:
Dragging inside the left middle grid section to distort the blur effect until it’s once again touching the left edge of the waterfall.
The warp grid takes a bit of practice before you’ll really get the hang of it, but it can be lots of fun to play
around with so don’t be afraid to give it a try. If you make a mistake, simply
press Ctrl+Z (Win) / Command+Z (Mac) to undo the warp and try again.
When you’re happy with the curve and your warp grid, press Enter (Win) / Return (Mac) to accept it and
apply the warp, and you’re done!
Here once again is my original waterfall photo:
The original photo once again for comparison.
And here is my finished “silky smooth waterfall” effect after adding a bit of a curve to the blur using the Warp
tool:
The final result.

And there we have it!

Create Silky Smooth Waterfalls in Photoshop

Uploaded by

Copyright:

Available Formats

Create Silky Smooth Waterfalls in Photoshop

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Create Silky Smooth Waterfalls in Photoshop

Uploaded by

Copyright:

Available Formats

Create Silky Smooth Waterfalls In

The original image.

And here’s the finished “silky smooth” effect:

Let’s get started!

Step 1: Draw A Selection Around The Waterfall

Select the Lasso tool from the Tools palette.

Step 2: Copy the Selection Onto Its Own Layer

Step 3: Apply The Motion Blur Filter To The New Layer

Photoshop’s “Motion Blur” dialog box.

Step 4: Add A Layer Mask To The Waterfall Layer

Clicking the Layer Mask icon.

Select the Brush tool from the Tools palette.

You can also press B on your keyboard to quickly select it.

The final result.

You might also like