Scribd
Upload
52 views1 page

Untitled 1

This document contains calculations for the warping design moment (Mw,Ed = 0.80 kNm) and warping torsional design moment (Tw,Ed = 0.29 kNm) of a beam section based on equations from SCI P385 Appendix C Case 4. It also checks that the design shear force (Vy,Ed = 200 kN) is less than the reduced shear resistance (Vc,y,Rd = 1035.9 kN) accounting for St Venant torsion stress, and that the design bending moment (My,Ed = 500 kNm) is less than the design bending resistance moment (Mc,y,Rd = 650.1 kNm). Both checks pass requirements

Uploaded by

Truong Phuoc Tri
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
52 views1 page

Untitled 1

This document contains calculations for the warping design moment (Mw,Ed = 0.80 kNm) and warping torsional design moment (Tw,Ed = 0.29 kNm) of a beam section based on equations from SCI P385 Appendix C Case 4. It also checks that the design shear force (Vy,Ed = 200 kN) is less than the reduced shear resistance (Vc,y,Rd = 1035.9 kN) accounting for St Venant torsion stress, and that the design bending moment (My,Ed = 500 kNm) is less than the design bending resistance moment (Mc,y,Rd = 650.1 kNm). Both checks pass requirements

Uploaded by

Truong Phuoc Tri
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Project Job Ref.

HTL Section Sheet no./rev.


3
Calc. by Date Chk'd by Date App'd by Date
A 9/1/2022

Warping '' (SCI P385 Appendix C Case 4)


'' = Td / (GSEC3  It  L)  (-1 + cosh(x / a) - tanh(L / (2  a))  sinh(x / a))
Warping design moment, Mw,Ed = ESEC3  Iw  '' / hs
0.90
0.80
0.70
0.60
Warping moment

0.50
0.40
0.30
0.20
0.10
0.00
-0.10
-0.20 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
(KNm)

-0.30
-0.40
-0.50
-0.60
-0.70
-0.80
-0.90
Distance along beam (x/L)

Warping design moment; Mw,Ed = 0.80 kNm

Warping torsional ''' (SCI P385 Appendix C Case 4)


''' = Td / (GSEC3  It  L  a)  (sinh(x / a) - tanh[L / (2  a)]  cosh(x / a))
Warping torsional design moment, Tw,Ed = ESEC3  Iw  '''
Warping torsional moment

1.00
0.80
0.60
0.40
0.20
0.00
-0.20 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
-0.40
-0.60
(KNm)

-0.80
-1.00
Distance along beam (x/L)

Warping torsional design moment; Tw,Ed = 0.29 kNm


Check shear - Section 6.2.6
Height of web; hw = h - 2  tf = 428 mm
 = 1.200
hw / tw = 43.2 = 63.8   /  < 72   / 
Shear buckling resistance can be ignored
Design shear force; Vy,Ed = 200.00 kN
Shear area - cl 6.2.6(3); Av = max(A - 2  b  tf + (tw + 2  r)  tf,   hw  tw) = 5085 mm2
Design shear resistance - cl 6.2.6(2); Vpl,y,Rd = Av  (fy / (3)) / M0 = 1042.1 kN
Shear stress due to St Venant torsion; t,Ed = Tt,Ed  tw / It = 3.06 N/mm2
Reduced shear resistance due to torsion - eq 6.26; Vc,y,Rd = Vpl,T,y,Rd = (1 - t,Ed / (1.25  (fy / (3)) / M0))  Vpl,y,Rd = 1035.9 kN
Vy,Ed / Vpl,T,y,Rd = 0.193
PASS - Design shear resistance exceeds design shear force
Check bending moment - Section 6.2.5
Design bending moment; My,Ed = 500 kNm
Design bending resistance moment - eq 6.13; Mc,y,Rd = Mpl,y,Rd = W pl.y  fy / M0 = 650.1 kNm
My,Ed / Mpl,y,Rd = 0.769
PASS - Design bending resistance moment exceeds design bending moment

You might also like