Exercise 1 SIGTRAN_Over CP

A Interface Signaling
Sigtran

APZ (CP)

1. Configure Virtual Ethernet Interface :

IHIFI:VIF=ETHA-51;
IHIFI:VIF=ETHB-51;

2. Configure IP Interface for SIGTRAN :

IHIFC:VIF=ETHA-51, ADD, IP=172.30.78.8,NETMASK=255.255.255.0,ARP=YES;

IHIFC:VIF=ETHB-51, ADD, IP=172.30.78.9, NETMASK=255.255.255.0, ARP=YES;

3. Router Path Supervision (RPS)

IHRSI:VIFP=ETH-51, GW=172.30.78.1&172.30.78.2, PINGA=172.30.78.20,

PINGB=172.30.78.30,IPMIGR=YES; IHRSP:VIFP=ETH-51;

4. Define Default Gateway

IHRHC:VIF=ETHA-51, DEFGW=172.30.78.1, ADD, PREF=2;

IHRHC:VIF=ETHB-51, DEFGW=172.30.78.2, ADD, PREF=1;

5. Create SCTP End Point :

IHBII:LIP=“172.30.78.8"&“172.30.78.9", EPID=EP01, USER=M3UA,MODE=CLIENT,

SCTPCP,LPN=3000;

6. Create SCTP Association :

IHADI:SAID=EP01_EP02,EPID=EP01, RIP="10.1.1.2" & “10.1.2.2”,RPN=3002,SCTPCP;

-2
-
7. SCTP Association State, Change :

IHASC:SAID= EP01_EP02, PROC=ESTB,USER=M3UA,SCTPCP;

8. M3UA, Association State, Change :

M3ASC:SAID= EP01_EP02, PROC=ACT;

9. Create Own Signaling Point :

C7OPI: OWNSP=2-101, SPTYPE=SEP;

10. Change Signaling Point Name :

C7PNC: OWNSP=2-101, SPID=BSC1;

11. Create Remote Signaling Point :

C7SPI: OWNSP=2-101, SP=2-109, NET=IP;

12. Change Remote Signaling Point Name :

C7PNC: SP=2-109, SPID=MSCS1;

13. M3UA, Routing Specification, Initiate :

M3RSI:DEST=2-109, SAID= EP01_EP02, PRIO=1;

14. M3UA, Routing Activation, Initiate :

M3RAI:DEST=2-109;

15. SCCP Network Signalling Point, Initiate

C7NPI: SP=2-109;

16. SCCP Network Subsystem Number, Initiate

C7NSI: SP=2-109, SSN=254;

-3 -
Exercise 2 : Configuration_ A-Interface over IP_
AGW.
1. Define the VRP_AGW:

Hardware layout

DBTRI;
DBTSI:TAB=RPSRPBSPOS, INDNO=3, RPADDR=10, BRNO=0,MAGNO=2, SLOTNO=11,
BUSCONN=NO;
DBTRE:COM;

Allocation of RP

EXRPI:RP=10, TYPE=EPB1;

Insertion of Software in RP

EXRUI:RP=10, SUID="9000/CXC 146 252 R3K01"; !EBEXR!

EXRUI:RP=10, SUID="9000/CXC 146 600 R1D01"; !INETR!
EXRUI:RP=10, SUID="9000/CXC 146 05 R1A03"; !RPFDR!
EXRUI:RP=10, SUID="9000/CXC 146 03 R1A08"; !RPIFDR!
EXRUI:RP=10, SUID="8/CXC 146 1680/2400 R1A01"; !RCLCCHR!
EXRUI:RP=10, SUID="8/CXC 146 1684/2400 R1A01"; !RCSCB2R!
EXRUI:RP=10, SUID="8/CXC 146 1683/2400 R1A01"; !RCSCBR!
EXRUI:RP=10, SUID="8/CXC 146 1653/2400 R1A01"; !RHLAPDR!
EXRUI:RP=10, SUID="8/CXC 146 1674/2400 R1A01"; !RMPAGR!
EXRUI:RP=10, SUID="8/CXC 146 1668/2400 R1A01"; !ROCTHR!
EXRUI:RP=10, SUID="8/CXC 146 1681/2400 R1A01"; !RQRCQSR!
EXRUI:RP=10, SUID="8/CXC 146 1682/2400 R1A01"; !RQUNCR!
EXRUI:RP=10, SUID="8/CXC 146 1656/2400 R1A01"; !RTAGWR!
EXRUI:RP=10, SUID="8/CXC 146 1636/1100 R1A01"; !RTIPCTHR!
EXRUI:RP=10, SUID="8/CXC 146 1650/2400 R2A01"; !RTPGSR!
EXRUI:RP=10, SUID="9000/CXC 146 226 R1D01"; !AUCMR!

Allocation of EM

EXEMI:EQM=RHLAPD-4, RP=10, EM=0, SUID="8/CXC 146 1653/2400 R1A01";

EXEMI:EQM=AUCM-4, RP=10, EM=1, SUID="9000/CXC 146 226 R1D01";
EXEMI:EQM=RMPAG-4, RP=10, EM=2, SUID="8/CXC 146 1674/2400 R1A01";
EXEMI:EQM=RCSCB-4, RP=10, EM=3, SUID="8/CXC 146 1683/2400 R1A01";
EXEMI:EQM=RQUNC-4, RP=10, EM=4, SUID="8/CXC 146 1682/2400 R1A01";
EXEMI:EQM=RQRCQS-4, RP=10, EM=5, SUID="8/CXC 146 1681/2400 R1A01";
EXEMI:EQM=RCLCCH-4, RP=10, EM=6, SUID="8/CXC 146 1680/2400 R1A01";
EXEMI:EQM=RCSCB2-4, RP=10, EM=7, SUID="8/CXC 146 1684/2400 R1A01";
EXEMI:EQM=RTIPCTH-4, RP=10, EM=8, SUID="8/CXC 146 1636/1100 R1A01";
EXEMI:EQM=RTAGW-4, RP=10, EM=13, SUID="8/CXC 146 1656/2400 R1A01";
EXEMI:EQM=RTPGS-4, RP=10, EM=14, SUID="8/CXC 146 1650/2400 R2A01";
EXEMI:EQM=ROCTH-4, RP=10, EM=15, SUID="8/CXC 146 1668/2400 R1A01";

Deblocking of RP and EM

-4
-
 BLRPE:RP=10; !EPB1!

192.168.0.5
10.32.202.15

10.32.202.16
192.168.1.5

2. Configuration User Plane:

Internal gateway definition

RRGWC:GW1= 192.168.0.1;

RRGWC:GW2= 192.168.1.1;

RRGWP;

AGW board =X (ipdevno=4)

RRIPI:IPADDR=192.168.0.5,MASK=255.255.255.0,IPDEVTYPE=RTIPCTH,GW=GW1,IPDEV
NO=4;

RRIPI:IPADDR=192.168.1.5,MASK=255.255.255.0,IPDEVTYPE=RTIPCTH,GW=GW2,IPDEV
NO=4;

RRIPP:IPADDR=ALL;

-5 -
 ! AGW -;

RRIPI:IPDEVTYPE=RTIPCTH,IPADDR=10.32.202.15,MASK=255.255.255.128,APPLSEL;

RRIPI:IPDEVTYPE=RTIPCTH,IPADDR=10.32.202.16,MASK=255.255.255.128,APPLSEL;
RRAPI:IPADDR=192.168.0.5, APL=IPS;

RRAPI:IPADDR=192.168.1.5, APL=IPS;

RRAPP:APL=IPS;

IP Application

RRAPI:IPADDR=10.32.202.15,APL=AIP;

RRAPI:IPADDR=10.32.202.16,APL=AIP;

RRAPP:APL=AIP;

-6
-
Exercise 3 : Configuration_ Abis-Interface over IP_
PGW.

1. Define the VRP_PGW:

10.32.202.17
10.32.202.18

192.168.0.6
192.168.1.6 192.168.0.1

192.168.1.1

It is similar to item 1 ( Configuration _A_Interface over IP_AGW).

2 Configuration user plane:

Internal gateway definition

RRGWC:GW1= 192.168.0.1;

RRGWC:GW2= 192.168.1.1;

RRGWP;

ABIS board =X (ipdevno=5)

-7 -
 RRIPI:IPADDR=192.168.0.6,MASK=255.255.255.0,IPDEVTYPE=RTIPCTH,GW=G
W1,IPDEVNO=5;

RRIPI:IPADDR=192.168.1.6,MASK=255.255.255.0,IPDEVTYPE=RTIPCTH,GW=G
W2,IPDEVNO=5;

! ABIS -;

RRIPI:IPDEVTYPE=RTIPCTH,IPADDR=10.32.202.17,MASK=255.255.255.128,APP
LSEL;

RRIPI:IPDEVTYPE=RTIPCTH,IPADDR=10.32.202.18,MASK=255.255.255.128,APP
LSEL;

RRAPI:IPADDR=192.168.0.6, APL=IPS;

RRAPI:IPADDR=192.168.1.6, APL=IPS;

RRAPP:APL=IPS;

IP Application

RRAPI:IPADDR=10.32.202.17,APL=ABI;

RRAPI:IPADDR=10.32.202.18,APL=ABI;

-8
-
Exercise 4 : Configuration_ Gb-Interface over IP_

1. Define the VRP_GPH:

Hardware layout

DBTRI;
DBTSI:TAB=RPSRPBSPOS, INDNO=7, RPADDR=7, BRNO=0,MAGNO=1, SLOTNO=16,
BUSCONN=NO;
DBTRE:COM;

Allocation of RP

EXRPI:RP=7, TYPE=EPB1;

Insertion of Software in RP

EXRUI:rp=7, SUID="9000/CXC 146 252 R3K01"; !EBEXR!

EXRUI:rp=7, SUID="9000/CXC 146 600 R1D01"; !INETR!
EXRUI:rp=7, SUID="9000/CXC 146 05 R1A03"; !RPFDR!
EXRUI:rp=7, SUID="9000/CXC 146 03 R1A08"; !RPIFDR!
EXRUI:rp=7, SUID="8/CXC 146 1685/2000 R1A01"; !RCCBCR!
EXRUI:rp=7, SUID="8/CXC 146 1678/2400 R1A01"; !RGNCCR!
EXRUI:rp=7, SUID="8/CXC 146 1662/2400 R1A01"; !RTGBIPR!
EXRUI:rp=7, SUID="8/CXC 146 1661/2400 R1A01"; !RTIPGPHR!
EXRUI:rp=7, SUID="8/CXC 146 1675/2400 R1A01"; !RGCNTR!
EXRUI:rp=7, SUID="8/CXC 146 1676/2400 R1A01"; !RGCONR!
EXRUI:rp=7, SUID="8/CXC 146 1677/2400 R2A01"; !RGMACR!
EXRUI:rp=7, SUID="8/CXC 146 1679/2400 R1A01"; !RGRLCR!
EXRUI:rp=7, SUID="8/CXC 146 1660/2400 R1A01"; !RTGPHDVR!
EXRUI:rp=7, SUID="8/CXC 146 1666/2400 R1A01"; !RGSERVR!

Allocation of EM

EXEMI:EQM=RGSERV-20, rp=7, EM=0, SUID="8/CXC 146 1666/2400 R1A01";

EXEMI:EQM=RTGPHDV-20, rp=7, EM=2, SUID="8/CXC 146 1660/2400 R1A01";
EXEMI:EQM=RGRLC-20, rp=7, EM=3, SUID="8/CXC 146 1679/2400 R1A01";
EXEMI:EQM=RGMAC-20, rp=7, EM=4, SUID="8/CXC 146 1677/2400 R2A01";
EXEMI:EQM=RGCON-20, rp=7, EM=5, SUID="8/CXC 146 1676/2400 R1A01";
EXEMI:EQM=RGCNT-20, rp=7, EM=7, SUID="8/CXC 146 1675/2400 R1A01";
EXEMI:EQM=RTIPGPH-20, rp=7, EM=8, SUID="8/CXC 146 1661/2400 R1A01";
EXEMI:EQM=RTGBIP-20, rp=7, EM=9, SUID="8/CXC 146 1662/2400 R1A01";
EXEMI:EQM=RGNCC-20, rp=7, EM=10, SUID="8/CXC 146 1678/2400 R1A01";
EXEMI:EQM=RCCBC-20, rp=7, EM=11, SUID="8/CXC 146 1685/2000 R1A01";

Deblocking of RP and EM

-9 -
 BLRPE:RP=1; !EPB1!

10.32.203.50

192.168.0.1

192.168.1.1

2. Define the VRP_GPH:

IP Connectivity Configuration

RRIPI:IPADDR=192.168.0.66,IPDEVTYPE=RTIPGPH,
IPDEVNO=20,MASK=255.255.255.0,GW=GW1;

RRIPI:IPADDR=192.168.1.66,IPDEVTYPE=RTIPGPH,
IPDEVNO=20,MASK=255.255.255.0,GW=GW2;

Configure IP Application

RRAPI:APL=IPS,IPADDR=192.168.0.66;

RRAPI:APL=IPS,IPADDR=192.168.1.66;

- 10
-
Configure IP Service

! Configure IP addresses for GBIP!

RRIPI:IPADDR=10.32.203.50,IPDEVTYPE=RTIPGPH,IPDEVNO=20,MASK=255.255.255.128;

Configure IP Application

! Configure port!

RRPPI:PORT=45000,APL=GBI;

! Associate application with IP addresses!

RRAPI:APL=GBI,IPADDR=10.32.203.50;

RRAPP:APL=GBI;

RRINI:NSEI=4179,RAT=GERAN,PRIP=10.74.34.18,PPORT=2157,CAP=50;

RRINP:NSEI=ALL;

RRINC:NSEI=4179,NSSTATE=ACTIVE;

RRINP:NSEI=ALL;

RLGSI:CELL=CELL;

RLGSP:CELL=ALL;

RRBVP:NSEI=ALL;

- 11 -
- 12
-
Exercise 5 : BSC NWI-E Configuration
1. Access the Switch

› User “Admin”

› Password “<enter>”

EVO 8200 BSC with NWI-E

- 13 -
 2. VLAN Configuration for SR_Gb

create vlan SR_Gb

configure SR_Gb tag 300

configure SR_Gb ipaddress 10.40.16.3/29

configure SR_Gb add ports 12 tagged

3. VLAN Configuration for SR_Abis

create vlan SR_Abis

configure SR_Abis tag 200

configure SR_Abis ipaddress 10.40.48.3/29

configure SR_Abis add ports 13 tagged

- 14
-
 4. VLAN Configuration for SR_SS7

create vlan SR_SS7

configure SR_SS7 tag 500

configure SR_SS7 ipaddress 10.40.52.3/24

configure SR_SS7 add ports 11 tagged

5. VLAN Configuration for SR_A_Userplane

create vlan SR_A_userplane

configure SR_A_userplane tag 800

configure SR_A_userplane ipaddress 10.40.53.8/29

configure SR_A_userplane add ports 11 tagged

6. VLAN Configuration for Intercon

create vlan Intercon

configure Intercon tag 15

configure Intercon ipaddress 192.168.2.1/24

configure Intercon add port 9 untagged

7. VLAN BSC_Inner Configuration

create vlan BSC_Inner

configure vlan BSC_Inner tag 30

configure vlan BSC_Inner add ports 1-8 untagged

configure vlan BSC_Inner ipaddress 192.168.0.1 255.255.254.0

enable ipforwarding vlan BSC_Inner

configure vlan BSC_Inner add secondary-ipaddress 10.213.92.162/29

configure vlan BSC_Inner add secondary-ipaddress 10.21.77.1/25

- 15 -
 8. VLAN Configuration for SR_OM

create vlan SR_OM

configure vlan SR_OM tag 462

configure vlan SR_OM add ports 11 tagged

configure vlan SR_OM ipaddress 10.127.149.148 255.255.255.240

9. VLAN Configuration for LH_A

create vlan LH_A

configure vlan LH_A tag 46

configure vlan LH_A protocol p1

configure vlan LH_A add ports 1-8 untagged

- 16
-
Exercise 6 : Connection OF TG (MODEL G12
(RBS6000)
TG Creation :

RRBGI:LBG=1,DSCPDL=48,DSCPUL=48,CRC32=ON,OVLTH=1000;

RRBGI:LBG=2,DSCPDL=46,DSCPUL=46,CRC32=ON,OVLTH=1000;

RRBGI:LBG=3,DSCPDL=10,DSCPUL=10,CRC32=ON,OVLTH=1000;

RRBGP:LBG=ALL;

RRPTI:PSTU=TB_30-1,LBG=1&1&2&2&3,SAPI=0&62&10&11&12;

RRPTP:PSTU=ALL;

RRSGI:SCGR=287,MODE=IPM,PSTU=TB_30-1,MBWDL=4096,MBWUL=4096;

RRSGP:SCGR=ALL;

RRSCI:SCGR=510,SC=0&1&2&3d;

RRSCP:SCGR=ALL;

RXMOI:MO=RXOTG-287,RSITE=TEST , COMB=HYB,SWVER=B1310R073F, TMODE=SCM,SCGR=510 ,

SIGDEL= NORMAL;
Note:- if all parameters are not executed in the command RXMOI then use RXMOC to add more parameters

CF Creation:

RXMOI:MO=RXOCF-287, TEI=62;
RXMOC:MO=RXOCF-287, SIG=SCCONC;

IS Creation :

RXMOI:MO=RXOIS-287;

CON Creation :

RXMOI:MO=RXOCON-287,DCP=350&&581;

TF Creation :

RXMOI:MO=RXOTF-287, TFMODE=SA,SYNCSRC=DEFAULT;

DP Creation :

RXMOI:MO=RXODP-287-0, DEV=RXODPI-574;

MCTR Creation :

RXMOI:MO=RXOMCTR-287-0,TXMPWR=AUTO,MAxPWR=46,MAXTRX=4;

- 17 -
TRX Creation :

RXMOI:MO=RXOTRX-287-0, TEI=0, DCP1=178, DCP2=179&&186,SIG=SCCONC,SC=0;

RXMOI:MO=RXOTRX-287-1, TEI=1, DCP1=187, DCP2=188&&195,SIG=SCCONC,SC=0;
RXMOI:MO=RXOTRX-287-2, TEI=2, DCP1=196, DCP2=197&&204,SIG=SCCONC,SC=0;
RXMOI:MO=RXOTRX-287-3, TEI=3, DCP1=205, DCP2=206&&213,SIG=SCCONC,SC=0;

OBS.: If the RBS that you are using in this exercise has more than 4 TRX´s, please continue the
allocation.

Connection of TRX TO CELL

OBS.: In this point you have already created a cell.

RXMOC:MO=RXOTRX-287-0, CELL=KISTA1,MCTRI=0,CHGR=0;
RXMOC:MO=RXOTRX-287-1, CELL=KISTA1,MCTRI=0,CHGR=0;
RXMOC:MO=RXOTRX-287-2, CELL=KISTA1,MCTRI=0,CHGR=0;
RXMOC:MO=RXOTRX-287-3, CELL=KISTA1,MCTRI=0,CHGR=0;

TX Creation :

RXMOI:MO=RXOTX-287-0,BAND=GSM900, MPWR=43;
RXMOI:MO=RXOTX-287-1,BAND=GSM900, MPWR=43;
RXMOI:MO=RXOTX-287-2,BAND=GSM900, MPWR=43;
RXMOI:MO=RXOTX-287-3,BAND=GSM900, MPWR=43;

Connection of TX TO CELL

OBS.: In this point you have already created a cell.

RXMOC:MO=RXOTX-287-0, CELL=KISTA1;
RXMOC:MO=RXOTX-287-1, CELL=KISTA1;
RXMOC:MO=RXOTX-287-2, CELL=KISTA1;
RXMOC:MO=RXOTX-287-3, CELL=KISTA1;

RX Creation

RXMOI:MO=RXORX-287-0, RXD=AB, BAND=GSM900;

RXMOI:MO=RXORX-287-1, RXD=AB, BAND=GSM900;
RXMOI:MO=RXORX-287-2, RXD=AB, BAND=GSM900;
RXMOI:MO=RXORX-287-3, RXD=AB, BAND=GSM900;

Time Slot Creation

RXMOI:MO=RXOTS-287-0-0&&-7;
RXMOI:MO=RXOTS-287-1-0&&-7;
RXMOI:MO=RXOTS-287-2-0&&-7;
RXMOI:MO=RXOTS-287-3-0&&-7;

Connection of TG TO CELL

OBS.: In this point you have already created a cell.

RXTCI:MO=RXOTG-287,CELL= KISTA1,CHGR=0;

- 18
-
OBS.: If do you have one more channel group for this site, you need to connect to the TG

RXTCI:MO=RXOTG-287,CELL= KISTA,CHGR=1;

RXESI:MO=RXOTG-287,SUBORD;
RXBLE:MO=RXOTG-287,SUBORD;
RXMSP:MO=RXOTG-287,SUBORD;

RLSTC:CELL=KISTA1,STATE=ACTIVE;
RLCRP:CELL=KISTA1;

- 19 -
Exercise 7 : Cell Definition and Configuration
Part 1

RLDEI:CELL=KISTA1,CSYSTYPE=GSM900;

RLDEC:CELL= KISTA1,CGI=262-80-841-12, BSIC=70, BCCHNO=57, AGBLK=1, MFRMS=5,

BCCHTYPE=NCOMB, FNOFFSET=1, XRANGE=NO;

RLCXC:CELL= KISTA1, DTXD=ON;

RLCPC:CELL= KISTA1,BSPWRT=43,MSTXPWR=29,BSPWRB=43;

RLCFI:CELL= KISTA1,DCHNO=20&32&44&56;

RLCCC:CELL= KISTA1,CBCH=NO,SDCCH=1,TN=2&&4;

RLMFC:CELL= KISTA1, MBCCHNO=51&11&31&41, LISTTYPE=IDLE;

RLSSC:CELL= KISTA1, ACCMIN=100, CCHPWR=19, CRH=2, DTXU=0, NCCPERM=7,

RLINKT=16, NECI=0, MBCR=0;

RLSBC:CELL= KISTA1,TX=7,ATT=YES,T3212=40;

Part 2

RLLOC:CELL= KISTA1, BSPWR=30, BSTXPWR=29, BSRXMIN=104, BSRXSUFF=95,

MSRXMIN=99, MSRXSUFF=90, SCHO=ON, MISSNM=3, AW=OFF;

RLNRI:CELL= KISTA1,CELLR=841C1;

RLMFC:CELL= KISTA1, MBCCHNO=51&11&31&41, LISTTYPE=ACTIVE;

RXTCI:MO=RXOTG-0,CELL= KISTA1, CHGR=0;

RLSTC:CELL= KISTA1, STATE=ACTIVE;

RLCRP:CELL=ALL;

RLCRP:CELL= KISTA1;

In msc

MGCEP:CELL=ALL; WHERE THE CELL WITH THE CGI MUST EXIST OTHERWISE

MGCEI:CELL= KISTA1,CGI=262-80-841-12,BSC=BSC1A;
MGCEC:CELL= KISTA1,CO=4,RO=1,EA=1;

- 20
-
Exercise 8 : Activation of Supervision in BSC

A Seizure Supervision of Logical Channels

RLVLP;

RLVLE:CHTYPE=TCH;
RLVLE:CHTYPE=SDCCH;

RLVLC:CHTYPE=TCH,PL=1,ACL=A1;
RLVLC:CHTYPE=SDCCH,PL=1,ACL=A1;
RLVLP;

RLVLI:CELL=KISTA1,CHTYPE=TCH;
RLVLI:CELL=KISTA1,CHTYPE=SDCCH;
RLVLP;
RLVAP;

RLVLI:CHTYPE=SDCCH;
RLVLI:CHTYPE=TCH;
RLVAP;

RLVLP;
RLVLE:CHTYPE=TCH;
RLVLE:CHTYPE=SDCCH;

RLVLE:CELL=KISTA1,CHTYPE=TCH;
RLVLE:CELL=KISTA1,CHTYPE=SDCCH;
RLVLP;
RLVAP;

B Supervision of Logical Channel Availability

"SUPERVISION OF LOGICAL CHANNEL AVAILABILITY"

RLSLP:CELL=ALL;

RLSLC:CELL=KISTA1,ACL=A2,LVA=4,CHTYPE=TCH;
RLSLC:CELL=KISTA1,ACL=A1,LVA=1,CHTYPE=SDCCH;
RLSLP:CELL= KISTA1;

RLSLI:CELL= KISTA1;

RLSLP:CELL= KISTA1;

RXTCP:CELL= KISTA1,MOTY=RXOTG;
RXCDP:MO=RXOTG-287;
RXBLI:MO=RXOTS-287-1-5&&-7;
RXCDP:MO=RXOTG-287;
ALLIP:ACL=A2;
ALLIP;

- 21 -
 RLSLE:CELL= KISTA1,PERM;
RLSLP:CELL= KISTA1;

RXBLE:MO=RXOTS-287-1-5&&-7;
RXCDP:MO=RXOTG-287;

- 22
-