Electric mobile

air compressors
E-Air fixed speed
If you have the power to choose,
choose electric
Atlas Copco’s range of E-Air compressors brings the benefits of electric-driven equipment to every possible
workplace. No emissions, efficient and ruggedized motors, low noise levels and a plug-and-play design; you
can take the E-Air anywhere.
If you have an electric power supply at your job site, you can save good money using electricity instead of diesel, depending on
the energy prices. Emission-free and quiet, the E-Air is an environmentally-friendly and efficient source of compressed air. These
light and compact compressors deliver compressed air with a flow of 3 to 37 m³/min (106-1300 cfm).

ROBUSTNESS

TECHNICAL DATA
XAMS XAHS XAVS XAMS XAHS XAVS XAXS
Model XA 57E XA 77E
800E 650E 550E 850E 710E 650E 600E

Nominal effective
bar (g) 7 7 8.6 12 14 8.6 12 14 17
working pressure
psi (g) 100 100 125 175 200 125 175 200 250
Free air delivery* cfm 106 148 750 650 550 900 750 700 600
m³/min 3 4.2 21.5 17.5 15.4 25.5 21.5 19.7 16.9
l/s 50 70 358 292 257 425 358 328 282
Sound pressure level
dB(A) 76 78
(LpA) at 7m (23ft)**
Max. ambient
°C 46
temperature
Compressor oil
l 8 60
volume
Outlet valve 2 x 3/4 “ 1x 2” and 1x 3/4 “
Motor

Power kW 18.5 26 132 160

Voltage and
V/Ph/Hz 380/3/50
frequency
Dimensions and weight

m
Skid NA 3.4x1.62x1.7
(L x W x H)
Kg NA 2300 2900
m
Undercarriage 2.7x1.3x1.2 5.0x2.1x2.1 5.0x2.1x2.1
(L x W x H)
Kg 550 2400 3.000

* Unit performance measured according to ISO 1217, Ed. 3, Annex C - 1996

** Measured according to ISO 2151: 2004 using ISO 9614/2
Lower your total cost of ownership
XA 57E-77E
FEATURES:
• Motor driven with IP54 protection & Class F insulation
• Overload protection
• Easy to maneouver to and at worksite thanks to small
overall dimensions & light weight
• Operate and environmentally safe
• Rugged construction built to last

XA(H/V/M)S 850E-550E
FEATURES:
• Safety features such as pressure displays, emergency stop
• IP 54 high efficiency electric motor, class F continuous rating
• Advanced controller for easy operation
OPTIONS:
• Phase sequence protection
• Undercarriage with parking brake and jockey wheel
• Robust design for outdoor application
• Cold start at -25 °C (-13 °F)
• Over load protection
• Skid mounted
• Single axle for easy maneuverability

XRHS 930E-1300E
FEATURES: XRHS XRHS XRVS XRHS
Model
930E 1150E 960E 1300E
• Safety features as preSafety features as pressure displays, Nominal effective
emergency stop, frequency protection bar (g) 20 20 25 20
working pressure
• High efficiency electric motor, class F continuous rating
psi (g) 290 290 363 290
• Wye-Delta motor starter Free air delivery* cfm 937 1129 975 1300
• Wide voltage supply 380V ±15% m³/min 26.7 32 27 37

• Best for use in all weather conditions (-25°C to +46°C) l/s 442 533 460 617
Sound pressure level
• Anti condensation heater to protect motor dB(A) 80
(LpA) at 7m (23ft)**
• 1000 hours service interval
Max. ambient
°C 46
• Centralized drain valves for all liquids temperature

• Advanced XC2003 controller: easy-to-read instrument panel Compressor oil

l 75 85
volume
• Quiet design to have lower noise level
Outlet valve 1x 2” and 1x 3/4”
• Operator and environmentally safe
Motor
• Rugged frame built to last
Power kW 230 275 315

Voltage and
V/Ph/Hz 380/3/50
frequency

Dimensions and weight

m
Skid 3.6 x 2.1 x 2.5 NA
(L x W x H)
Kg 5.455 NA
m
Support mounted 3.6 x 2.1 x 2.4 3.4 x 2.2 x 2.3
(L x W x H)
OPTIONS:
Kg 5.265 6.021
• Wagon trailer m
Wagon (tow Raised) 4.3 x 2.1 x 2.7 4.4 x 2.2 x 2.6
• Skid or support mounted version (L x W x H)

• Cold start Kg 5.615 6.548

Power Technique Solutions Portfolio

2958 2210 00 © Atlas Copco Airpower NV, Belgium 2019. All rights reserved.
Atlas Copco’s Power Technique Business Area has a forward-thinking philosophy. For us, creating customer
value is all about anticipating and exceeding your future needs – while never compromising our environmental
principles. Looking ahead and staying ahead is the only way we can ensure we are your long term partner.

Air compressors
Ready to go Versatility Productivity partner

• 1-5 m³/min • 5.5-22 m³/min • 19-116 m³/min

• 7-12 bar • 7-20 bar • 10-345 bar
*Diesel and electric options available

Handheld tools
Pneumatic tools Hydraulic tools Petrol engine
driven tools

• Breakers (2.5 – 40 kg) • Breakers (11 – 40 kg) • Breakers & Tie Tampers (25 kg)
• Rockdrills (5 – 25 kg) • Additional Hydraulic Tools • Combi Drills (23 Kg)
• Underground Rockdrills • Powerpacks
• Additional Air Tools

Generators Light towers Dewatering pumps

• Portable • Diesel LED and MH • Submersible

• Mobile • Electric LED • Surface
• Industrial • Battery LED • Small portable
*Multiple configurations available to produce *Diesel and electric options available
power for any size application

Photos and illustrations contained herein might depict products with optional and/or extra components which are not included with the
standard version of the product and, therefore, are not included in a purchase of such product unless the customer specifically purchases such
optional/extra components. We reserve the right to change the specifications and design of products described in this literature without notice.
Not all products are available in all markets.

Atlas Copco Power Technique

www.atlascopco.com/ptba