TC 700
TC 700
Contents
General----------------------------------------------------------------------------------------1
Brief Introduction--------------------------------------------------------------------------2
Software Specification-------------------------------------------------------------------4
Circuit Description--------------------------------------------------------------------9
CPU Pins-----------------------------------------------------------------------------------14
Adjustment Description---------------------------------------------------------------49
Exploded View----------------------------------------------------------------------------62
Packing--------------------------------------------------------------------------------65
PCB View--------------------------------------------------------------------------------66
Block Diagram-------------------------------------------------------------------------72
Level Diagram-------------------------------------------------------------------------73
Schematic Diagram-------------------------------------------------------------------74
Specifications-------------------------------------------------------------------------87
General
Manual Scope
This manual is intended for use by experienced technicians familiar with similar types of
communication equipment. It contains all service information required for the equipment and is current
as of the publication date.
Brief Introduction
Control Knob and Function Key
Software Specification
Specification
Conventional Mode
1. Mechanical Knob (16 channels)
VHF:136~174MHz
UHF:300~350MHz,350~390MHz,400~450MHz,400~470MHz
420~470MHz,440~490MHz,470~520MHz,450~520MHz
2. Channel Spacing: 25/20/12.5KHz (programmable)
3. Step: 2.5/5/6.25KHz
4. LED Indicator: Red/Green/Orange
5. 3 Programmable Function Keys
6. CTCSS/CDCSS Encode & Decode
7. DTMF Encode
8. 5-Tone Encode & Decode
9. HDC2400TM Encode & Decode
10. Squelch Mode:
1) Carrier
2) CTCSS/CDCSS
3) OPS: Optional Signalling
4) CTCSS/CDCSS AND OPS
5) CTCSS/CDCSS OR OPS
11. Scan
12. Time-Out-Timer (TOT)
13. Rent
14. Battery Save
15. Emergency Alert
16. PTT ID
17. Tx Admit Criteria
Description
1. User Mode
This mode is for conventional operation.
2. All Reset Mode
Firstly ground the SELF point, and then turn the power on while holding down TK key for 2
seconds. The radio enters all reset modes with green LED flashing twice. Turn the channel
selector knob to the selected channel and press PTT key, the radio data is all reset (All clone
4
modes will be automatically activated when All Reset is completed). Frequency settings are shown
as follows:
Selected
Frequency Band(MHz) F1 (MHz) F2 (MHz) F3 (MHz) F4 (MHz) F5 (MHz)
Channel
Circuit Description
Power Supply
Power supply of the radio is derived from the battery, which supplies battery B+ after passing through
fuse 3A and then feeds through power switch. The power supplies voltage for three AVRs. IC504
supplies 5V (M5V) voltage for the control circuit. And IC503 supplies 5V (C5V) voltage for the shared
circuit. IC502 supplies voltage for the transmit/receive circuit. In transmit mode, T5C becomes low
voltage and Q502 is turned on to supply 5V (T5v) voltage for the transmit circuit. In receive mode, R5C
becomes low voltage and Q504 is turned on to supply 5V (R5V) voltage for the receive circuit.
1. PLL Circuit
Step frequency of PLL can be 2.5 KHz, 5.0 KHz or 6.25 KHz. A 16.8MHz reference oscillator signal is
divided at IC301 by a counter to generate a 2.5 KHz, 5.0 KHz or 6.25 KHz reference frequency. Output
signal from VCO is buffer amplified by Q301 and divided at IC301 by a frequency divider. The divided
signal is compared with 2.5 KHz, 5.0 KHz or 6.25 KHz reference signal in the phase comparator of
IC301. The output signal from phase comparator is filtered through a low pass filter to generate a level
D.C., and the level D.C. controls oscillator frequency by controlling VCO.
2. VCO
The operating frequency is generated by Q302 in transmit mode and by Q307 in receive mode.
Operating frequency generate a control voltage by phase comparator to control varactor diodes so that
the oscillator frequency is consistent with the MCU preset frequency(D301、D302、D303 and D304 in
transmit mode, and D307、D308、D309 and D310 in receive mode). T/R pin is set high level in receive
mode, and low level in transmit mode. The output from Q302 and Q307 is amplified by Q304 and sent
to buffer amplifier.
3. Unlock Detector
An unlock condition appears if low level appears at MUXOUT pin of IC301. Transmission is forbidden if
this condition is detected by microprocessor.
Receiver
The receiver utilizes double conversion superheterodyne (UHF)/(VHF).
Transmitter
1. AF and Signaling
AF signal from the microphone is amplified and low-pass-filtered in IC402 before it enters base band
processing chip IC408, which also enters CTCSS/CDCSS/DTMF/5-Tone etc signaling generated by
CPU. The IC408 processed mixing signal enters VCO for direct FM modulation (see fig.5).
2. RF Power Amplifier
The transmit signal from VCO buffer amplifier (Q111) is amplified by Q101 and Q102. The amplified
signal is then amplified by the power amplifier Q103 and Q104 (including a two-stage FET amplifier) to
create 4.0W (UHF)/5.0W (VHF) RF power (see Fig. 6).
11
12
Control System
The IC500 CPU operates at 9.8304 MHz.
The block diagram of MCU control system is shown as following:
EEPROM
13
CPU Pins
1. CPU pins are as follows:
No. MCU Port Name Port Name Input/Output Features
14
35 P61 COM1
36 P60 COM2
37 P57/RDY EEDAT I/O EEPROM DATA, date input/output.
44 P50/WR WE I
45 P47/CS3 CODIO I/O Common date control (AK2346 DATA).
46 P46/CS2 EXT-MIC I
47 P45/CS1 SAVE O SAVE, power save control
48 P44/CS0 R5C O R5C Rx circuit power supply control
49 P43/A19 T5C O T5C Tx circuit power supply control
50 P42/A18 EXT-PTT I
51 P41/A17
52 P40/A16
53 P37/A15
54 P36/A14 SDATA O
55 P35/A13 CSN O
56 P34/A12
57 P33/A11
58 P32/A10
59 P31/A9
60 Vcc VCC I VCC
61 P30/A8 NCON O Narrow band control
62 Vss GND I GND
63 P27/A7 AFCO O AFCO
64 P26/A6 WCON O Wide band control
65 P25/A5 LEDR O Red light control:H,lit;L,out
66 P24/A4 LEDG O Green light control:H,lit;L,out
67 P23/A3 EN2 I EN2
68 P22/A2 EN4 I EN4
69 P21/A1 EN3 I EN3
70 P20/A0 EN1 I EN1
71 P17/INT5
72 P16/INT4 AFMUTE O
15
73 P15/INT3
74 P14 TK I Top Key
75 P13 DC-Switch O
76 P12 PLL_UL I PLL unlock detect
77 P11 PLL_STB O PLL strobe output
78 P10 MICMUTE O MICMUTE
79 P07/D7 Option1 I Programming cable detect.
80 P06/D6 PLL_DATA O PLL date input
81 P05/D5 PLL_CLK O PLL clock output
82 P04/D4 T/R O Receive/transmit control
83 P03/D3 APC-Switch O
84 P02/D2 PTT I PTT
85 P01/D1 SK1 I Side Key1
86 P00/D0 SK2 I Side Key2
87 P107/AN7 I MIC signal input
88 P106/AN6 BATT I BATT, battery voltage detect
89 P105/AN5 BATTSEL I Battery detect
90 P104/AN4 NC I
Reset mode control :ground this pin to enter
91 P103/AN3 SELF I
reset mode.
92 P102/AN2 RSSI I RSSI detect pin
93 P101/AN1 SQL I Squelch level input
94 AVSS GND I A/D conversion power supply input.
95 P100/AN0 CTCSSIN I CTCSS output
96 VREF VCC I A/D conversion reference voltage
97 AVCC VCC I A/D conversion power supply input.
98 P97 O
99 P96 O
100 P95 O
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
Adjustment Description
Adjust the radio by PC programming software or by manual adjustment. In manual adjustment mode,
the adjustment method is shown as follows: (Refer to “Software Specification” for the manual
adjustment mode)
Adjustment
Adjustment in user mode
Firstly ground the SELF point, turn on the power by holding down TK for 2 seconds, and then the radio
enters reset mode with green LED flashing twice. Turn the channel selector knob to the selected
channel and press PTT, the radio data is all reset (All clone modes will be automatically activated when
reset is completed). Refer to All Reset Mode in Software Specification for more details:
VCO
Measurement Adjustment Specification/
Item Condition
Test Instrument Terminal Parts Method Remarks
1. Setting Power supply voltage
2.Transmit VCO 1. CH: TX high Digital Voltmeter CV TC30 3.9V±0.1V
lock voltage 2. TX Low 1 Check >0.5V
3.Receive VCO 1. CH: RX high TC30 3.9V±0.1V
lock voltage 2. RX low 2 Check >0.5V
49
5. PTT/SK1
PTT→ Increase
SK1→ Decrease
PTT/SK1 is pressed to adjust upward/downward. Red LED glows indicating the maximum adjust value
and green LED indicating the minimum value. Hold down the key to increase/decrease the adjust
value continuously.
Press PTT key to save the BATT LOW and SQL settings, then green LED glows once.
6. Select adjustment item group
The first group of adjustment item is selected when the radio enters the manual adjust mode.
Turn to CH16 and press PTT key to enter the next group. Press again to return to the first group.
Orange LED flashes once when the first group is selected. Orange LED flashes twice when the
second group is selected.
7. Frequency Setting (can be set via programming software)
5 point tuning(MHz) TX: { TX1,TX2,TX3,TX4,TX5 }
RX: { RX1,RX2,RX3,RX4,RX5}
3 point tuning(MHz) TX: { TX1, TX3, TX5}
RX: { RX1, RX3, RX5 }
1 point tuning(MHz) TX: { TX3 }
RX: { RX3}
50
Adjustment Method
Turn the power on by holding down TK and SK2 key simultaneously for 2 seconds, the radio enters
manual adjust mode with red LED flashes twice. Refer to Manual Adjust Mode in TC-700 Software
Specification for more details.
1. Transmitter
Item Condition Test Instrument Method Purpose
Enter the adjust mode; Radio Adjust Frequency Error
Turn to CH1; Communication VR1 ≤100Hz
Adjust a channel
TX mode. Test Set;
TX Test
Enter the adjust mode. PTT key Adjust power to:
Turn to CH1. (increase) 1W±0.1W
1. TX power Low
Adjust at 5 point (wide SK1 key
band). (decrease)
Enter the adjust mode. PTT key No adjustment
Turn to CH3. Adjust at (increase)
3 point (wide band), 1 SK1 key
2. CDCSS balance
point (medium band) and Radio (decrease)
1 point (narrow band) Communication
respectively. Test Set
Enter the adjust mode. TX TEST PTT key Adjust deviation to
Turn to CH3. Adjust at HPF:20Hz (increase) 750Hz (wide band),
3 point (wide band), 1 LPF:300Hz SK1 key 600Hz (medium
Group 1 3. CDCSS point (medium band) and (decrease) band) and 400Hz
deviation 1 point (narrow band) (narrow band)
respectively. respectively.
51
52
When frequency of
modulated signal is
Group 1 adjusted to 1KHz
Enter the adjust mode. and amplitude is
11. VOX Save
Turn to CH11. Adjust at 1 adjusted to 45mv,
GAIN1
point (wide band). press PTT key to
Radio
save the current
Communication
value.
Test Set
TX TEST
When frequency of
HPF:20HZ
modulated signal is
LPF:15KHZ
adjusted to 1KHz
Enter the adjust mode. and amplitude is
12. VOX
Turn to CH12. Adjust at 1 Save adjusted to 15mv,
GAIN5
point (wide band). press PTT key to
save the current
value.
13. TX power Enter the adjust mode. PTT key(Increase) Adjust power to
HIGH 5W(4W)±0.1W
Turn to CH13. Adjust at 5 SK1 key
VHF: 5W,
point (wide band). Communication (decrease)
UHF: 4W
Test Set
TX TEST
14.TX voltage Enter the adjust mode. Save Adjust voltage to
Low Turn to CH14. Adjust at 1 5.8V,press PTT
point (wide band). key to save
2. Receiver
53
Note: AF deviation of the receiver is 3KHz (wide band),2.5KHz(medium band) and 1.5KHz (narrow
band)
54
MCU Check
No
Yes
Yes No
Read Check the
9.8304MHz works
available? reading circuit
normally?
`
Yes
Yes Reset
Q501 No
Replace Q501
works well?
Yes
Pin10 is of No
high level? Check M5V
Yes
55
VCO
56
Tx Circuit
No output
power
Yes No Low
The current is Control voltage is Check Q502
normal? normal?
High
Check transistor offset
Check drive
voltage and low pass
stage
network
No
Check the
The power is No
suited
normal? network
Yes
Yes If the power
Finished is normal.
Finished No
Replace
Q102
Finished No
Replace
Q101
57
Rx Circuit
No recieve
No
Yes Replace IC
Yes
Yes
Yes
Yes
Check Q207
passage
58
Fig. 1
Fig. 2
Removing the Tx-Rx unit from the chassis (as shown in Fig. 3)
1. Loosen the nut on channel switch ⑦ and that on volume switch ⑧, and remove earphone
holder ⑨.
2. Remove the screw ⑩ on the PTT key board.
3. Remove the ten screws ⑾ fixing the control board.
59
Fig. 3
Fig. 4
3. Press the stainless fixing ring on the water-proof packing of the speaker, and attach the
screw ③.
4. Insert the upper part of the chassis into the case assembly ④.
Note: Make sure the speaker lead wire does not press on the microphone magnetic core.
60
5. Press downward the chassis ⑤, enabling the chassis and the case to fit together.
Note: If the packing of the SP/MIC does not come to the correct position after attaching the chassis
to the case assembly, reposition the packing with your fingers.
Fig. 5
Fig. 6
61
Exploded View
A B C
3 4 5
2
1
8
7
6 9
1 6
10
11
44
42
43 12
42 31 A
A
41 32 13
A
A 14
40 33
2
35 34
TX-RX Unit 38 15
39 37 36
26 B
28 29
25 27 16
A
A
30
17
24 A
19
23
C
D 18
D 20
22
21
62
63
64
Packing
65
72
ANT
C251 C236 C238
LPF BPF BPF IC202 XF203 IC204 IC408 IC202
IC404 SP
C135 C254 Q207 C312 C241 Q206 C230 Q204 C487
AMP
K501
Each of the levels plotted from RF to the first IF is the level that can provide a 12dB SINAD for an SSG signal through a 470pFb coupling capacitor.
When AF ouput is adjusted to 1W, adjust the frequency deviation of 1KHz AF level to 3KHz (Wide), 1.5KHz (Narrow).
Transmit
12mVrms 60mVrms 150mVrms 0.15Vrms 0.44Vrms 0.8Vrms 0.62Vrms 4W
ANT
IC408 C312 C312 C101 C105 C111 C117 D102 LPF
C307
IC402
MIC Q302 Q304 Q111 Q101 Q102 Q103 Q104
D305
AMP
AF VTVM RF VTVM
73
EDZ6.8B
C609
ZD402
BATTSEL C608 R602 8 1 R456
BATTSEL R548 C558 C517 D501 C518 0.1uF INPUT-1 OUTPUT1 R411 C603
0.01uF * 10
1000p 1SR154-400 470p 220p
ALM/BP
220k 1000p 4.7
7 2
EDZ6.8B
2SK1824 R413 INPUT+1 +Vs C601
ZD403
ZD404
Q402 NC R412 0.1u SPK ACK
6 3 C605
R605 R606 INPUT+2 OUTPUT2
EDZ6.8B
R608 C418 4.7 100p
C610 100 10 10u/16v
RES1 R400 5 4 C416
470pF INPUT-2 GND
100k 0.1u J402
C419 R454 C604
10n 100 100p
AF DET EDZ6.8B
AF DET AFMUTE
C484 C499 ZD405
R490 R489 R487 R603 R414 C417
TONEO 470p
TONEO 47k 0.1u
4.7k 10k 10k Q414 C445 R419 33k R439 220K 1k
BEEP 0.1u R485 C432 Q403 MIC JACK
10K 0.1u 2SJ243 1u C444
ALARM C486 C485 R488 SWB+ C413
R460 R609 47P TMMT717TA R455
1
0 ZD407
TC75W51FU
+
C428 EDZ6.8B
C487 Q405
0 4.7u/6.3v R417 100p
DTC144EE
+ -
R642 Q508
R434 R591 1k 5CNS 2SA1832
C5V R422 R421 R418 470
R494 330K 2.7K C483
C429 4.7u/6.3v 18k 18k C414 10k
R498 22k
8
82k
BLM11A601S
R435 1uF
1u 1.8k
0.1UF R401 EXT-MIC
220 R424 EXT-MIC
L401
R436 27k
R405 0
C491 100K 0.022u Q509 C643 C644
R407 C410 1k R646
1U R404 SP_O 4.7k 1u 470p
0 R408
MIC_I
10k C402
0.47u Q411 47p 1M C422 2SK1824
R492 R444
390k
R654 MIC_O
0 R640 D406 R438 0.022u C641 R645
0 0.1u 1.8M
C480 C477 R471 C475 18k
MOD
MOD Q412 Q413 R653 2200p 560p 0.47u R403 C407
SP_I
8
100k 1K C478 0 C404 1.8k
1K R481 C479
AFMUTE
+ -
VOX
IC402 1u/16v
AUX1
AUX2 68k
5CNS
IC408 TC75W51FU
+
AK2346 C476 C406 C405
C425 1000p 0.1u 5CNS
1 24 33p
-
1U AGNDIN TEST C423
Q410 R479 R478 470p
AGND RXIN
R472 56k
1
33p C458
AUX1 C489 TXINO RXLPFO 150p *
AUX1 R425
R482 1uF LIMLV RXAF
EXTLIMIN RXAFIN
C457 C427
C474 0.022u R473 R442 R410 150k
0 MOD EXPOUT 0.1UF
18k R495 56k
VSS VDD C5V 10k 4.7k
R437 R483 C628 0.033u
TCLK XIN R457 C420
27k 27k 4.7U
C430 TDATA XOUT 0 47p
DI/O DIR R474 C472 C470 C469
1800P 12 13 22p
RDF/FD SCLK 1M 0.1u
CTC_PLL C471 22u/6.3v
22p
X402
Q409 R406 * 100k
R427 3.6864MHz
NCON 2SK1824 R428 R453
NCON R477 33k
6.8k
0
R426
AFCK D402 C408
AFCK 10k C426
AFDT RB706F-40 NC
AFDT 470p
CODIO Q401
CODIO
AFRDF 2SC4116(y)
AFRDF
AFSCK MICAFMUTE
AFSCK
AFDIR
AFDIR
R423
AFCO
AFCO NC
VOX
VOX D410
MICAFMUTE R450 R448 R445
MICAFMUTE C459 MA742
AFMUTE 82k 100k 22k
AFMUTE 0.1u
R449 C449
TI 0.039UF C446
TI 390k R446
R431 180k 0.068u
C451
R466 22k 220p IC405
C633 1k R5V
TONEI 0.47UF 1 8
100k R429
TDATA XOUT
22P
SDATA R634
C637
X630
3.6864MHz
AFSCK
AFSCK
CSN
CSN
74
M5V
R611
47K
J403
COM4
47K
47K
47K
47K
COM4 1
COM3
COM3 2
COM1
COM1 3
COM2
R535
R536
R538
R539
PTT COM2 4
OPTION1
K507 OPTION1 5
COM5
COM5 6
PTTCO
PTTCO 7
8
MIC_I
K506 MIC_I 9
MIC_O
MONI MIC_O 10
SP_O
SP_O 11
L503 SP_I
SP_I 12
0.22UH M5V
13
14
M5V
CON14
K504
R502
47k
FK2 C512
IC501
R508 8 1 1000P
VCC A0
EECLK EXT-MIC
EXT-PTT
SCL A2 EXT-PTT
AFDIR
CODIO
SAVE
AFDT
CP511 1K*2
CP512 1K*2
CP5091k*2
CP505 AFSCK
1K R651
1K R560
1K R553
47K R556
1K R550
COM1
COM3
COM3
COM4
1K*4 COM4
TXD
TXD
SHIFT TONEI
TONEI
1/2OSC
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
1/2OSC
COM5
P42/A18
P43/A19
P56/ALE
P61/CLK0
P62/RxD0
P65/CLK1
P66/RxD1
P71/RxD2
P72/CLK2
P44/CS0
P45/CS1
P46/CS2
P47/CS3
P52/RD
P54/HLDA
P55/HOLD
P63/TxD0
P67/TxD1
P70/TxD2
P53/BCLK
P57/RDY
P50/WRL
P60/CTS0
P64/CTS1
P51/WRH
COM5
CTC_PLL
CTC_PLL
CTC_OUT
CTC_OUT
PTTCO
PTTCO
51 25 COM5 AFRDF
P41/A17 P73/CTS2 AFRDF
52 24 R566 CTC_PLL AFCK
P40/A16 P74/TA2out Q501 AFCK
53 23 1K AUX1
R532 1k P37A15 P75/TA2in DTC144EE AUX1
SDATA 54 22 R565 CTC_OUT
SDATA P36/A14 P76/TA3out
CSN 55 21 1K TONEO
CSN P35/A13 P77/TA3in TONEO
56 20 PTTCO APC/TV
R533 1k P34/A12 P80/TA4out C514 APC/TV
57 19 AFRDF PLLUL
P33/A11 P81/TA4in 15p PLLUL
0.01U 58 18 CP507 1K*2 AFCK PLLSTB
P32/A10 P82/INT0 X501 PLLSTB
C545 59 17 AUX1 AFMUTE
P31/A9 P83/INT1 R554 9.8304MHz AFMUTE
60 16 OPTION1
ACC 30622M4 P84/INT2 R561 47K *1M* OPTION1
NCON 1K 61 15 C546 1000P PLLDAT
P30/A8 P85/NMI PLLDAT
62 14 PLLCLK
CP518 1K*4 R534 VSS VCC PLLCLK
AFCO 63 IC506 13 C515 27P T/R
P27/A7 XIN T/R
WCON GGND 64 12 APCSW
P26/A6 VSS APCSW
LEDR 65 11 PTT/RXD
P25/A5 XOUT PTT/RXD
LEDG 66 10 GGND RESET VOX
P24/A4 RESET R510 0 VOX
67 9 R552 C516 27P BATTSEL
P23/A3 P86/Xcout 47k BATTSEL
68 P22/A2 P87/Xcin 8 R558
69 7 0 NA RSSI
L504
EN3
EN2
EN1
P102/AN2
P101/AN1
P100/AN0
ENCODE 1K*2
P105/IN5
P104/IN4
P103/IN3
P12/D10
C5V
P11/D9
P10/D8
P07/D7
P06/D6
P05/D5
P04/D4
P03/D3
P02/D2
P01/D1
P00/D0
K502 C5V
AVCC
AVSS
VREF
R517
10k D502
C542 C541 C540 C539
SWB+
0.01U 0.01U 0.01U 0.01U SWB+
100
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
R526
100K
R5121K
47K
47K
47K
47K
R527
R525
R5631K
IC503
C526 D504 R559
TK11250CM
10U 6.3V R518 0 100K
RESET
IC505
CP514
1K*2 CP506
1
R555 1K
1 T 8 2 1
Vdd 1K Vin Vout
M5V
GND
Sck 100K
R551
Y T501 C522
R516
1K*2
CP526 1K*4
Vda X C525
RES1 C527 0.1u
1U
R504
SW-DIP4 470P
3
R567
Q503
10 SAVE 2SJ243
0
C560 C561
0.1u 0.1u R5V
R5V
5CNS
MICAFMUTE
5CNS
470p
BATTSEL
47K
OPTION1
AFMUTE
PLLDAT
PLLCLK
C528
PLLSTB
APCSW
Q504
PLLUL
R515
MONI
BATT
SELF
VOX
2SJ243
RSSI
1 3
SQL
PTT
T/R
FK
TI
IC502
XC6201P502R
C530
2
BATT
R5C
470p
SELF
LEDR
R506 R519
LEDG
M5V Q505 0
SWB+ *
R562
RES1 C538 T5V
T5V
R522
1000P
1K
C559
Q502
R549 1u
AGND DTC144EE 2SA1745
47K
Q507 Q506
DTC114EE DTC114EE C531
100K
220K
R523
R521
D505 D506
75
V RF &TX C131*
ANT SW
C135
C137
10p
C139*
9p
C141*
10p
BLM21P600SG
R103 L102 R108 L103 1000p 1000p 0.01u 0.1u
Q101 330 47k 47k
R151 L117 330
2SC5108(Y) R105
3.3k
R118 680 R112 R113
C103 L106
4.7k 120k 47k
18p C114 C115 BLM21P221SG
1000p 470P
D201 C104 R121 R122 C133
C144 D103 D104
R149 R150 C155 C156 MA2S077 1000p 270 270 1000p
C107 47p MA2S077 MA2S077(HSC277)
5.6k 270 1000p 1000p R101 R104 R107 1000p
3.3K 22 22 L104
C106
1000p C112 C113 C116 C123 C124
0.1u 1u 1000p 1u 1000p
ANT SW ANT SW
R152
T5V
10 DCSW
DCSW
C108* C110 C109
C5V TH101
R5V 1000p 1000p 0.1u R124 R137 150k 1% R144
47k ZD101
Q105 2.2k
C159 C158 3.3k
0.1u 1000p Q108 C150 C152
DTC114EE 4.7u/10v 100p
R201 1 vcc R141
10k Q110
C201 R136 2 7
R123 DTA144EE
1000p C145 150k 1%
390
470p 3 6
R134
4 5 R142
150k 1% 1M
NCON IC101
NCON C147 C148 NJM2904V
0.01u 470p
C206 R204 CF202 R208 R127 R126 R125 C132
0.1u 22k 450KHz 22k 0.39 0.39 0.39 C153
SWB+ 470p
470p
R135 R138 R139 R143
D202 D203
150k 1% 150k 1% 150k 1%
DAN222 DAN222
C146 C149
1u 470p C154 R145
470p 47k
CF201 R5V
450KHz C202 T2
R205 R206 R207 R209
4p
4.7k 22k 22k 4.7k Q109 Q107
DTC114EE 2SK1824 APC/TV
APC/TV
C207 C205
18p L202 0.01u
39n
WCON
WCON R146
C208 R214 100k
0.1u 10 R147
C204 0
C203 D211
OSCI 18p 18p HSMP3820(NC)
OSCI
APCSW
Q208 R249 APCSW
R211 C209 L213
2SC5108(Y)(NC) R250
2.7k 470p 1k(NC) R5V
C219 C220 1k(NC) 390n(NC)
C214 R243 R244
C215 10u/6.3v
2.2k(NC) 91k 1%(NC)
4
0.1u 0.1u
R212 R5V R5V C272 C262
R245 C271 C260 R251 C261
50.4 MHz
82k
*C211 R252 C213 T201 0.47u16(NC) 18k(NC) 100p(NC) 1000p 510 0.1u 1000p
20p 82k C212 XFMR
R248
0.1u
150(NC) R241
8
R227
3
100k
3
470p 6.8k
MIXER
DEC
FILO
MIXO
OSCO
IFI
FILI
VCC
OSCI
IC204
NDET
NREC
2.7k
MIXI
RSSI
0.1u 220 1k
IFO
TA31136FN
AF
R247
E
IC202
T3 C228 6.8k(NC) C259 C266
R234 C250 R235 R253 L209
R238 1000p 1000p
9
2
16
03191250
L207
NC RF AMP 1000p
L211 1000p L212
SQL C246 C247
SQL C231 03191050 03191250
0.1u 10p R236 R239 L210 C263
C240 L205 D207 D208 D209 D210
NCON 6.8k C267
D206
76
T: 3.73V
VCO/TX R: 0 V
D303 L321 R305
HVC362 Q302
6.8u 2SK508NV 100
R: 2.3V RF BUFFER AMP
D
T: 2.4V D304 C311 Q304
C305*
L302 G 0.01u 2SC5108(Y)
T: 0.75V
6.8u S
C308* R: 0.75V
68p C312
HVC362 6p(B) C313 C100
C306* R303
33p 15p
22p 0
D301 D302 R304* 0.5p
L304 C307 390
HVC362 HVC362 R307 C323 L305
C304 33n 0.5p(B)
TC301* 150k 4p 100n
0.01u C309*
10p VCO SWITCH
10p(C) L320
D305 Q303 T: 3.89V L306*
6.8u R148
2SJ243 C310 R: 3.89V 27n
BB179(1SV278) 3.3k
1000p
R308
C354 100
R313 R322
L311 47k 270k C357 L307
D309 R: 4.08V 0603CZ
L309 0603CZ 1u/6.3v 0.01u R309
HVC362 6.8u T: 0V
22 R: 4.89V
VCO/RX
T: 0V
Q307 R310 R: 4.89V
D310 C319
L308 2SK508NV 100k C314 C356
C324
1000p 0.1u
6.8u 0.01u
HVC362 39p C321* C325
3.5p(B)
C320*
C318 10p RIPPLE FILTER
D307 D308 L310* R314* 0.5p(B)
1000p 23n 390 Q306
HVC362 HVC362 Q305
VCO SWITCH 2SC4617
TC302* C322* 0508UMC4
10p 7p(B) C5V
L313
6.8u
L314
0603CZ R311 C315 R312 C317 D306
1k 470p 4.7k 470p MA2S111
R347 CV MOD
MOD
10k T7
T/R
RIPPLE
C316 FILTER
T/R 10u/6.3v SWITCH
R315
C5V
0
L316
0.22uH(0603CZ)
R316 R318 R319
2.2k 0 0
R317 C336
2.7k R350 C337
R320 1 16 R349 10 0.1u
C326 C328 Rset Vp 4.7u/10V
0.1u/35v 0.22u/35v 4.7k 10 C362 D311 R351
C327 2 15 MA2S111 150k
2.2u/16v CP DVDD
3 14 470p PLLUL
CPGND MUXOUT PLLUL
1k
R348 4 13 R352 C338
C329 AGND LE
10 0.1UF
100p
5 12 C339
RFinB DATA
100p
6 11
RFinA CLK C340
R336 100p PLLSTB
C331 C332 7 10 C341 PLLSTB
AVDD CE
1000p 1000p 10k 100p
8 9
REFin DGND
C5V
R601 2 4 TDA2822
EDZ6.8B
8.2K Q404
ZD402
10u/16v
BATTSEL
BATTSEL
R548 C558 C517 C518 C608 C609 2SK1824 R602 8
INPUT-1 OUTPUT1
1
R411 R456 C603
D501
NC 10
C418
1000p 470p 0.01uF 220p
EDZ6.8B
220k 1000p 0.1uF 4.7
ALM/BP
EDZ6.8B
R413 7 2
3
INPUT+1 +Vs C601
ZD403
ZD404
C610 R400 NC 6 3 0.1u SPK ACK
470pF 1k R434 R435 INPUT+2 OUTPUT2
100 10 5 4
R412 C605
INPUT-2 GND R454
4.7 100 100p J402
C419 C416
10n Q403 0.1u C604
AF DET ZD405
AF DET
C484 AFMUTE NC
C413
R485 C432
470p
R490 R489 R487 R603 R414 EDZ6.8B
TONEO 0.1u 4.7K 0.1u 47k C417 C499
TONEO
4.7k 10k C445 R419 33k R439 220K 1k 0.1u 470p
10k TMMT717TA MIC JACK
R455
R488 1u C444
C486 C485 47P SWB+
0
47k
1
C607
R417
4.7u/6.3v
100p
+ -
0 5CNS 470
R422
R421
R418
18k
18k
BLM11A601S
82k R401
2SC4617 C482 C401 EXT-MIC 1u 1.8k
SP_O
C494 0.1UF
R424 27k 0.022u EXT-MIC
R609 Q408 C410 R405 0
C491 0.1UF R407 0.47u 1k R404 Q509 C643 C644 MIC801
220 R646
R608 SP_O
L401
1U 10k 0 4.7k 1u 470p
100K
MIC_I
8
100k 1K 0.1u 1.8k
1K R480 C479
R476
AFMUTE
1u C478 R475
10k
+ -
1u IC402
VOX
68k 1u/16v
AUX1
AUX2
5CNS
IC408 TC75W51FU
C405
C476
1000p
33p
C425
0.1u
C406
AK2346
+
1U 5CNS
1 24
-
AGNDIN TEST
R479 R478
150p C473
1
AUX1 C489 TXINO RXLPFO 0.1UF
AUX1
1uF LIMLV RXAF
C458 C427 150k 470p
R482* 0.1UF R442 R410 0.033u C420
EXTLIMIN RXAFIN R473
1800P
IC407
C460
0.47UF
R467 R4621 8 22k - +
10k 1M C497
R464
C632
150k
R630
560P R461 - + 1000p + - R447
4.7u/6.3v
10K 180k
10k
0.01u
C450
TDATA XOUT R437* 33k 27k 22k 10k 33k 33k 33k 10k
22P
SDATA R634
C637
78
R538 47K
R539 47K
PIN35)、COM2(CPU
PTT AUX2 PIN36)、OPTION1(CPU
K507 PIN79)、AUX1(CPU
L503 R649
0.22UH 0
PIN17)、COM5(CPU
PIN25)、PTTCO(CPU PIN20)
R502
Q601
47k
K506
MONI IC501 2SK1824
R508 8 1
VCC A0 AUX1 R610
EECLK C512 AUX1 EXT-MIC
EXT-PTT
SCL A2 EXT-PTT
AFDIR
CODIO
SAVE
AFDT
CP5121K*2
AFSCK
R650
CP5091k*2
1K R560
1K R553
47K R556
1K R550
8 AFSCK
1K R651
SP_0 11 COM1
PTT 1/2OSC SP_I COM3
SP_I 12 COM3
M5V COM4
1K*4 13 COM4
MONI TXD
14 TXD
SHIFT M5V TONEI
TONEI
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
FK CON14 TONECN
TONECN
ALARM COM5
P42/A18
P43/A19
P56/ALE
P61/CLK0
P62/RxD0
P65/CLK1
P66/RxD1
P71/RxD2
P72/CLK2
P44/CS0
P45/CS1
P46/CS2
P47/CS3
P52/RD
P54/HLDA
P63/TxD0
P67/TxD1
P70/TxD2
P55/HOLD
P60/CTS0
P64/CTS1
P51/WRH
P53/BCLK
P57/RDY
P50/WRL
COM5
CTC_PLL
CTC_PLL
CTC_OUT
CTC_OUT
PTTCO
51 25 PTTCO
COM5 AFRDF
P41/A17 P73/CTS2 AFRDF
52 24 R566 CTC_PLL
Q501 AFCK
53 P40/A16 P74/TA2out 23 AFCK
1K DTC144EE AUX1
R532 1K 54 P37A15 P75/TA2in 22 AUX1
SDATA R565 CTC_OUT
P36/A14 P76/TA3out
CSN 55 P35/A13 P77/TA3in
21 1K C514 TONEO
TONEO
56 20 PTTCO 15p APC/TV
R533 1K 57 P34/A12 P80/TA4out 19 APC/TV
AFRDF PLLUL
P33/A11 P81/TA4in PLLUL
58 P32/A10 P82/INT0
18 CP5071K*2 AFCK PLLSTB
PLLSTB
C545 59 17 AUX1 R554 X501 AFMUTE
R534 0.01U 60 P31/A9 P83/INT1 16 9.8304MHz AFMUTE
NC OPTION1
1K ACC P84/INT2 R561 47K OPTION1
NCON 61 P30/A8
30622M4 P85/NMI
15 C546 1000P PLLDAT
PLLDAT
CP518 1K*4 62 14 C515 PLLCLK
63 VSS VCC 13 27P PLLCLK
AFCO IC506 T/R
P27/A7 XIN T/R
WCON GGND 64 P26/A6 VSS
12 R510 APCSW
APCSW
LEDR 65 11 0 PTT/RXD
66 P25/A5 XOUT 10 PTT/RXD
LEDG GGND RESET VOX
67 P24/A4 RESET 9 C516 27P VOX
R552 BATTSEL
P23/A3 P86/Xcout BATTSEL
68 8 R558
69 P22/A2 P87/Xcin 7 47k NC
L504 RSSI
70 P21/A1 CNVSS 6 RSSI
SQL
71 P20/A0 BYTE
5 SHIFT
0.22UH TI
SQL
EN4
EN3
EN2
EN1
ENCODE 1K*2
P107/AN7
88 P106/AN6
93 P102/AN2
94 P101/AN1
96 P100/AN0
89 P105/IN5
90 P104/IN4
92 P103/IN3
C5V
P12/D10
K502
77 P11/D9
78 P10/D8
79 P07/D7
80 P06/D6
81 P05/D5
82 P04/D4
83 P03/D3
85 P02/D2
86 P01/D1
87 P00/D0
C5V
97 AVCC
R517
95 AVSS
VREF
10k D502
C542 C541 C540 C539 1SS373 SWB+
0.01U 0.01U 0.01U 0.01U SWB+
CP5241K*2 76
84
91
6
1k
R525
R528
R526
GGND
R527
47K
47K
47K
47K
R5121K
1K*2 CP506
SENSOR
R555 1K
1
0.1u
C523
1 8 2 1
T Vdd 1K Vin Vout
M5V
R551
GND
CP526 1K*4
4 Vda X 5
RES1 C525
0 R504
C527 IC505 1U
SW-DIP4
3
5CNS
47K C528 470p
BATTSEL
OPTION1
AFMUTE
PLLDAT
PLLCLK
PLLSTB
Q504
APCSW
R515
PLLUL
MONI
BATT
SELF
2SJ243
VOX
RSSI
1 3
SQL
PTT
T/R
FK
IC502
TI
XC6201P502R
2
LEDR
BATT
LEDG
R5C
C538 T5V
1K
1000P
Q507 R549
DTC114EE AGND DTC144EE C559
R531 R530 47K 1u
180 220
R520
330K
220K
R523
R521
C531
4.7K 1u
D505 D506
79
C127*
C129*
C128
C162
L107* C117 R114* C163*
3p
NC
2.2n Q104 C136*
4p
3p
1000p 0 C138* C140*
C134*
NC
L109
2SK3476 1P 4.5P 3P C142* L115
C130*
8T
1u
2.4P
R109 C125* C126* 1.5P
C105* C110* C111 C164*
2SK3475
R106 R110
Q103
R102 7p 1.5K 6p 10 470p L105 18P 16p NC
47K 0 L108
1u C161* R115
27p 220n
D101 C101 47
MA2S077 470p R111
2SC5108(Y)
47
Q101
BLM21P600SG
L110
RFosc C120
R103 L102* R108 L103* 470p C121 C122 L116*
2SC4988
330 15n 4T
Q102
5p
470p 470p
MA2S077 R107 C106 L104 C113 C123 C124
R104 22 470p BLM18AG601SN1D 470P 1u 470p
22
C112
0.1u
T5V
R144
2.2K DCSW
DCSW
R124 R137
C109 TH101 3.3K
DTC114EE
C108 150K 1%
4.7u10
47K
ZD101
C150
470p 0.1u
R5V C152 IC101
Q108
Q105 100p R141
R201 1 vcc 10K
DTC114TE
10K R136 Q110
150K 1% 2 7
DTA144EE
R134 3 6
R123 C145 150K 1%
C201 390 470p 4 5 R142
470p NJM2904V 1M
C153
C132
470p
C147 C148 470p
0.01u 470p R127 R126 R125
SWB+ 0.39 0.39 0.39 R143*
R135 180K
NCON
NCON R138 R139
150K 1% 150K 1% 150K 1%
R204 R208 R145
C206 22K CF202 22K 47K
0.1u 450K
C146 C149
1U 470p
C154
470p
D202 D203
DAN222 DAN222
CF201
450KHz Q107
2SK1824 APC/TV
R202* APC/TV
18 Q109
R146*
R205
R206
4.7K
22K
WCON
L201* L202*
WCON APCSW
15n 15n APCSW
C208 R214
0.1u 10
C202* C203* C204* C205 D211
OSCI 4p 12p 7p 470p HSMP3820(NC)
OSCI R249
C209 1K(NC) R250 L213
R211 470p 1K(NC) 390n(NC)
C214
2SC5108(Y)(NC)
C263
C215 C262 C264 C265
C213
NC
0.1u
R248
3
OSCO
IFI
VCC
FILI
OSCI
TH201
C237
1000p 4.7K
IC204 4 1
R225 R246
QUAD
NDET
NREC
R228 C239
MIXI
1K
AF
C236 0.01u
E
L204
9
680K
150n C253
R220
3
82p
0 T1 100p
33p C241 NC
47K 3.3K Q204 XF203 R223 0.01u T202 C247*
AF DET C230 R222
AF DET R218 49.95MHZ 100 R231 XFMR R233 C243 C245* 7p C251
R253 0.01u 100 18 0 4p L208* 22n 0.1u
C226 100K 7.5p R237 R240 R242
AFMUTE 1k Q202 0.01u Q207 4.3K 100K 100K
HVC350B
C222 R229
6
AFMUTE
R226
CD201
NC 1800p AT-41511
HVC350B
R203
2.2K C257*
R217
1.5K
1000p
450K
1.8K
2SC5108(Y) R230 4p
D207
0.1u
0.1uF 8p
C227
270
C244*
0.01U 25V
12p HSM88AS
RSSI 4p
9p
Q205
R221
C256* D208
SQL L206* L207* 9p NC
L210*
R239
6.8K
4T 4T D209 D210
R236
22n
NCON
NCON
C231 0 HVC350B HVC350B
Q201 DTA114EE 0.1u L205 C259*
C240 12p
82p 150n L211 L212
5T 5T
DTA144EE
C224
0.1u
Note: The coil inductor with "s" indicates its diameter is 0.3mm, while that without "s" 0.35mm.
* C105* C110* C125* C126* C127* C128* C129*C130* C134* C136* C138* C140* C141 C142* C161* C162 C163* C164* C202* C203* C204* C211* C244* C245* C247* C248* C255* C256* C257* C259* C260* C268* L102* L103* L107* L112* L113* L114* L116* L201* L202* L206* L207* L208* L210* R109 R112 R114* R116 R117 R143* R146* R202*
400-450 7P 6P 33P 27P 7P NC 0.75P 8P 5.6P 2P 5P 3P 1P 1.5P 56P 15P 2P 5P NC NC NC 39P 9P 4P 7P 9P 5P 12P 4P 12P 9P 5P 18n 15n 0 4T 4T 3T 4T 0 0 5Ts 4T 22n 22n 10 2.7k 0 39k 39k 82k 39k 0
(U1)
440-490 7P 6P 20P 20P 6P NC 6P 2.4P 5P 1P 5P 3P 1P 1.5P 27P 15P NC 6P 4P 12P 7P 56P 9P 4P 7P 9P 5P 12P 4P 12P 8P 4P 18n 15n 0 4T 4T 3T 4Ts 15nH 15nH 4T 4T 22n 22n 10 6.8k 0 47k 47k 180k 100k 18
(U2)
420-470 7P 6P 27P 22P 11P NC 2p 5P 4P 3P 6P 4P 1P 3P 56P 15P 3P 5P NC NC NC 27P 9P 4P 7P 9P 5P 12P 4P 12P 8P 4P 18n 15n 0 4T 4T 3T 4Ts 0 0 4T 4T 22n 22n 10 2.7k 0 39k 39k 180k 100k 0
(U3)
470-520 7P 6P 24P 20P NC NC 6P 2P 4P 1P 4P 3P 1P 1.5P 27P 15P NC 5P 4P 12P 7P 56P 3P 4P 15P 6P 10P 8P 4P 6P 8P 4P 18n 15n 0 4T 4T 3T 4Ts 15nH 15nH 4T 4T 22n 22n 10 6.8k 0 47k 47k 180k 100k 18
(U4)
350-390 8P 9P 33P 27P NC NC 8P 2.4P 3P 3P 5P 3P 1P 1.5P 47P 15P 0.75P NC NC NC NC 27P 12P 5P 9P 12P 20P 9P 5P 9P 6P 4P 33n 58n 3.3n 5T 5T 4T 4T 0 0 5Ts 5Ts 27n 27n 10 6.8k 2.7n 47k 47k 180k 100k 0
(U5)
300-350 8P 9P NC NC 13P 18P 8P 5P 6P 3P 8P 3P 2P 1.5P 68P 18P NC NC NC NC NC 27P 15P 6P 11P 15P 22P 22P 6P 22P 6P 4P 47n 56n 3.3n 5T 6T 4T 5T 0 0 5Ts 5Ts 27n 27n 0 2.7k 3.3n 39k 33k 180k 100k 0
(U6)
400-470 7P 6P 30P 30P 7P NC 0.75P 7P 6P 3P 6P 4P 1P 3P 47P NC 1P 9P NC NC NC 39P 9P 4P 7P 7P 5P 12P 4P 12P 9P 5P 18n 15n 0 4T 4T 3T 4T 0 0 5Ts 4T 22n 22n 10 2.7k 0 39k 10k 82k 39k 0
(U7)
450-520 7P 6P 39P 15P NC 6P 6P 3P 5P 1P 4P 3P 1P 1.5P 30P NC 0.5P 4P 4P 12P 7P 56P 3P 4P 7P 6P 7P 4P 4P 6P 8P 4P 18n 15n 0 4T 4T 3T 4T 15nH 15nH 4T 4T 22n 22n 0 1k 0 33k 15k 180k 100k 18
(U8)
80
C302 R301
3p
TC700-U Schematic Diagram (VCO&PLL)
C301 C359 L322 1K
470p 10p 18n
C358
L301 470p
C361 18n C360 Q301 R302
5p 5p 150K
2SC5108(Y) C303
10p(B)
R305
100
D303 L321 C311 C355 6P
100N 470p 0.1U 3.8V C157
HVC350B C312
R:2.3V L302 C305* L304* 0.5P C313 C100 RFosc
T:2.4V C309* Q304
3.3u 22P 22nH 2.5P 2SC5108(Y) 6p 22p R118
R151 L117*
C304 C306* C310* R307* Q111 3.3k 3.3k
1000pF D304 3P C307 C308* L320 L305* R148 R149 22N
0.5p 3P 3p 220K 2SC5108
HVC350B 3.3u 22n 3.3k 5.6k
L303
3.3u
0 R:4.3V
R320 16 R349 0.22uH(0603CZ)
R350
R351
470p 470p
150k
1
C336
4.7K 10 C362
2.2K 560 560 2 15 470p 0.1u D311
CP DVDD MA2S111 R352
1k C316
T/R
3 14 4.7u/10V
C326 R317 CPGND MUXOUT
C328
0.1u 20v 2.7K 0.1u 20v C329 4 13 C338
R348 AGND LE 0.1UF
100p C339
T/R
10 5 12
PLLUL
C343 VR1 L305* 39nH 22nH 39nH 22nH 47nH 82nH 39nH 22nH
X301 470p 68K L306* NC 47nH NC 47nH NC NC NC 47nH
C342
L315 16.8M R307* 330k 220k 330k 220k 330k 330k 330k 220k
0.56U R337 C345 L301 18nH 18nH 18nH 18nH 18nH 27nH 18nH 18nH
3 4 180K
Out Vcc 0.1U R484 R458 R409 R318 560 560 560 560 560 560 0 0
C330 C335 2 1 39K 22K 15K CTC_PLL R319 560 560 560 560 560 2.2K 0 0
10p 10p Gnd Vc CTC_PLL 2.2k 2.2k 2.2k 2.2k 0 560
R316 2.2k 680
R346 R5V R338 C344 R339 R317 2.7k 2.7k 2.7k 2.7k 2.7k 2.7K 1.2k 1.2k
100 91K 4.7u 10v 120K 350B 350B 350B 376B
D301 350B 350B 376B 376B
D302 350B 350B 350B 350B 350B 376B 376B 376B
C348 TH301 C421 C424
0.01U L317 L319 0.018UF 0.015UF D303 350B 350B 350B 350B 350B 376B 376B 376B
3K 376B
330N 330nH D304 350B 350B 350B 350B 350B 376B 376B
C349 D307 350B 350B 350B 350B 350B 376B 376B 376B
R345 1000P
220K D308 350B 350B 350B 350B 350B 376B 376B 376B
OSCI
C347 OSCI D309 350B 350B 350B 350B 350B 376B 376B 376B
R344 1000P C352 D310 350B 350B 376B
30p 350B 350B 350B 376B 376B
10
C350 C351 L318
Q308 NC 68P 330N
C353
NC 2SC5108(y)
81
66
Open-drain output that indicates the charging status by turning on, turning off, or flashing an external
LED.
BAT: Battery-voltage input
Battery-voltage sense input. A simple resistive divider, across the battery terminals, generates this
input.
TS: Temperature-sense input
Input for an external battery-temperature monitoring circuit. An external resistive divider network with a
negative temperature-coefficient thermistor sets the lower and upper temperature thresholds.
RC: Timer-program input
RC input used to program the maximum charge-time, hold-off period, and trickle rate during the charge
cycle, and to disable or enable top-off charge.
Vcc: Supply-voltage input
MOD: Modulation-control output
Push-pull output that controls the charging current to the battery. MOD switches high to enable
charging current to flow and low to inhibit charging current flow.
Charge Termination
1. Maximum Charge Time (Ni-Cd, Ni-MH, and Li-Ion)
The bq2000T sets the maximum charge-time through pin RC. With the proper selection of external
resistor and capacitor, various time-out values may be achieved. Figure Ⅱshows a typical
connection.
67
Where N is the number of cells in series. The end-to-end input impedance of this resistive divider
network should be at least 200KΩ and no more than 1MΩ.
A Ni-Cd or Ni-MH battery pack consisting of N series-cells may benefit by the selection of the RB1
value to be N-1 times larger than the RB2 value.
In a mixed-chemistry design, a common voltage divider is used as long as the maximum charge
voltage of the nickel-based pack is below that of the Li-Ion pack. Otherwise, different scaling is
required.
4. Charge Current Control
The bq2000T controls the charge current through the MOD output pin. The current-control circuit
supports a switching-current regulator with frequencies up to 500kHz. The bq2000T monitors
charge current at the SNS input by the voltage drop across a sense-resistor, RSNS, in series with
the battery pack. See Figure Ⅴ for a typical current-sensing circuit. RSNS is sized to provide the
68
Specifications
1. Output Voltage and Current
Input: 12±3V 1000mA
Output: 8-12V 20~1000mA
(Input: 12V 1000mA DC
Output: 800mA DC)
2. Charging Current
1) Li-ion battery
Fast charging current: 800±200mA
Minimum charging current: 75±20mA
2) Ni-MH battery
Fast charging current: 850±100 mA
Supplementary charging current: 65±10mA
Trickle charging current: 25~35mA
69
2. Ni-MH Battery
1) Fast charge: current: 850±100mA; LED indicator: red; switch to supplementary charging when rate
of temperature rise dT/dt=0.9~1/min or the temperature rises to 50℃.
2) Supplementary charging: charging current: 65±10mA; LED indicator: green; switch to trickle
charging if the supplementary charging time reaches or exceeds MTO.
3) Trickle charging: charging current: 25~35mA; LED indicator: green.Specifications
70
Specifications
General
VHF: 136-174MHz
Frequency Range UHF:300-350MHz,350-390MHz, 400-450MHz,
420-470MHz 440-490MHz,470-520MHz
Number of Channels 16
Channel Spacing 25 /20/12.5 KHz
Receiver
Reference Sensitivity 0.25/0.35 μV
Transmitter
RF Power Output 5W/2W/1W(VHF)4W/2W/1W(UHF)
-36dBm<1GHz
Spurious and Harmonics
-30dBm>1GHz
The specifications are tested according to EIA-603 and are subject to change without notice due to
enhancement in technology.
71