BOQ OLYMPIC Initial
BOQ OLYMPIC Initial
4 Filling available excavated earth (excluding rock) in trenches, plinth sides 324.87 m3 164.000 53278.680
of foundation etc. in layers not exceeding 20cm in depth consolidating
each deposited layer by ramming & watering lead up to 50m and lift up to
1.5m.
5 Providing, laying naturally occurred sand gravel Grade -III free from 488.07 m3 1385.000 675976.950
organic or other deleterious constituents including watering ramming,
consolidating in layers not exceeding 150mm (Spread thickness)and
dressing etc. complete as directed by the Engineer-in-charge
6 CONCRETE WORKS
7 P/L cement concrete in foundation and plinth excluding the cost of 67.62 m3 10564.000 714337.680
centring and shuttering : - (a) 1:4:8 (1 cem :4 Kanhaighat coarse sand:: 8
graded stone aggrt. 40mm nominal size).
8 R.C.C. WORKS
9 Providing and laying in position specified grade of reinforced cement 202.34 m3 16544.000 3347512.960
concrete, excluding the cost of centering, shuttering, finishing and
reinforcement - All work up to plinth level : (a)1:1:2 (1 cement :1
Kanhaighat coarse sand:2 graded stone aggregate 20 mm nominal size.)
10 RCC work in in walls (any thickness), including attached pilasters, 35.82 m3 17544.000 628426.080
buttresses, plinth and string ourses,fillets,columns, pillars, piers,abutment,
posts and struts etc. up to floor five level excluding the cost of centering,
shuttering ,finishing and reinforcement (a) 1:1:2 (1 cement : 1 Kanhaighat
coarse sand: : 2 graded stone aggrt. 20mm nominal size).
11 RCC work in beams, suspended floors, roofs having slope upto 15 degree 48.47 m3 17656.000 855786.320
landings, balconies,shelves,chajjas, lintels,bands,plain window
sill,staircases and spiral staircase upto floor five level but excluding the
cost of centering, shuttering ,finishing and reinforcement (a) 1:1:2 (1
cement : 1 Kanhaighat coarse sand: : 2 graded stone aggrt. 20mm
nominal size).
12 Reinforcement for R.C.C.work including bending,binding and placing in 16284.03 Kg 159.000 2589160.770
position complete
(b) TMT bars.
13 FORM WORKS
14 Providing form work i/c centering & shuttering so as to give a rough finish 695.76 m2 1034.000 719415.840
strutting and propping etc. height of propping and centering below
supporting floor to ceiling not exceeding 4m and removal of the same for
insitu reinforced concrete to and plain concrete work in.(using 12mm
shuttering ply)(a) Foundation footings, bases of columns etc. and mass
concrete.
15 (b) Columns, pillars, posts and struts (square, rectangular or polygon in 318.42 m2 1250.000 398025.000
plan).
16 (c) Sides & soffits of beams, beam haunchings, cantilevers, girders, 271.56 m2 1150.000 312294.000
bressummers and lintels not exceeding 1m in depth.
20 Wood Works
21 Providing wood work in frames of doors, windows, clerestory windows 1.09 m3 137701.000 150094.090
and other frames wrought framed and fixed in position (b) Local best
quality Teak Wood
22 P/F 38mm thick panelled, glazed or panelled & glazed shutters for doors, 16.20 m2 5136.000 83203.200
windows and clerestory windows i/c bright finished brass hinges (ordinary
type) with necessary screws.(a)Local best quality Teak Wood
23 Providing 40x3mm flat iron hold fast 40cm long i/c fixing to frames 20.00 Each 270.000 5400.000
with10mm dia bolts,nuts and wooden plugs and embedding to cement
concrete block 30x10x15cm 1:3:6 (1 cement : 3 coarse sand : 6 stone
aggrt. 20mm nominal guage).
24 Providing & Fixing M.S. grills of required patern to wooden frames of 80.00 Kg 192.000 15360.000
windows etc. with M.S. plates at required spacing and frames all round
bar with round headed bolts & nuts or by screws(b) Ornamental grill
25 Providing & fixing bright finished brass 100 mm door mortice latch with 4.00 Each 1591.000 6364.000
one dead bolt & a pair of levers handles with necessary screws etc.
complete (Indian make of approved quality).
26 P/F Al. Sliding door bolts bright finished or black enamelled with nuts & 4.00 Each 1404.000 5616.000
screws etc. complete.(a) 300x16 mm
27 Providing & fixing Brass Tower bolts (barrel type) with screws etc. 4.00 Each 674.000 2696.000
complete.a)250 x 10 mm
28 (b) 100x10 mm 32.00 Each 310.000 9920.000
29 Providing & fixing Brass handles with necessary screws etc. complete. (a) 4.00 Each 183.000 732.000
125mm
30 (b) 100mm 16.00 Each 156.000 2496.000
31 Flooring Works 0 0.000
32 Granite stone slab flooring over 20 mm (average) thick base of cement 3169.92 m2 8981.000 28469051.520
mortar 1 : 6 (1 Cement: 6 Kanhaighat coarse sand:) laid and jointed with
grey cement slurry including rubbing and polishing complete with -(a)
Granite slab 20 mm slab thick (i)Jade Black 60 x 120 cm
33 STEEL WORKS
34 Steel work in built up (square & hollow section) trusses including cutting, 26534.87 kg 231.000 6129554.970
hoisting, fixing in position and applying a coat of approved steel primer
red oxide chrom primer conforming to IS 2079, welded and bolted
incluiding special shape washer etc. complete.
35 Supply & Installation of 22mm thick (minimum) standing seam 1789.12 m2 14321.000 25621987.520
polycarbonate panels with suitable polycarbonate connector including
trapezoidal HDSS Fastener, screws to fix the same on to the supporting
structure including aluminium UPD etc. complete for roofing & as per the
direction of the engineer in charge. The cost shall include assembling &
installation of entire panel with width of 1040-1200mm (min) c/c on top of
MS Structure (paid separately) to ensure a pull-out load of min. 7000N
(7KN) tested as per ISO 6892:1998 and IS 1608:2005. Panels shall be
with angular daylighting concept in translucent clear and opaque walls in
two colours in single panel to achieve required Lux Levels with improved
variable daylighting & shading throughout the day for better ambient
temperature below the roof. Panels shall be with six to seven layers &
shall pass dart drop impact test as per IS 14443-97 & shall show no sign
of breakage on Polycarbonate sheets which have been exposed to UV for
a min. of 500 Hours as per ASTM G 155. Panels shall not have
Yellowness Index as per ASTM D 1925 of 15 units when tested on a
sample exposed to UV for 500 Hours as per ASTM G 155. U value shall
not be more than 1.7 W/m2K as per EN ISO 10077-2:2018. Approve
Make: Flux / DPI Daylighting or approved equivalent.
36 Providing and fixing 12 mm thick frameless toughened glass door shutter 394.93 m2 5900.000 2330087.000
of approved brand and manufacture, including providing and fixing top &
bottom pivot & spring type fixing arrangement and making necessary
holes etc. for fixing required door fittings, all complete as per direction of
Engineer-in-charge (Door handle, lock and stopper etc.to be paid
separately).
37 Providing & fixing 19 mm thick cement fibre board for cushion of roofing 1789.12 m2 2328.000 4165071.360
as per approved design
38 Providing and fixing stainless steel (grade 304 ) railing made of Hollow 2085.63 kg 708.000 1476626.040
tubes, channels, plates etc., including welding, grinding, buffing, polishing
and making curvature (wherever required) and fitting the same with
necessary stainless steel nuts and bolts complete, i/c fixing the railing
with necessary accessories & stainless steel dash fasteners , stainless
steel bolts etc., of required size, on the top of the floor or the side of waist
slab with suitable arrangement as per approval of Engineer-in-charge
39 Finishing
40 12mm cement plaster 1:4 (1 cement : 4 coarse sand). 500.68 Sqm 327.000 163722.360
41 Providing and applying plaster of paris putty of 2 mm thickness over 500.68 Sqm 230.000 115156.400
plastered surface to prepare the surface even and smooth complete.
42 Painting on wall with (two coats) of plastic emulsion paint of approved 500.68 Sqm 157.000 78606.760
quality in all shades on new work to give an even shade.
43 Applying ready mixed priming coat pink primer of appd. quality on wood 16.20 Sqm 49.000 793.800
work.
44 Painting two or more coats (excluding priming coat) with superior ready 16.20 Sqm 113.000 1830.600
mixed paint for wood workof appd. quality in all shades on new work to
give an even shade.
45 Providing under layer for plinth protection of 75 mm thick (unconsolidated) 75.35 Sqm 392.000 29537.200
of stone aggrt. 40 mm nominal size wall rammed & consolidated &
grouted with fine sand i/c finishing the top of concrete smooth.
46 Providing plinth protection 50 mm thick in cement concrete 1: 3 : 6 (1 75.35 Sqm 527.000 39709.450
cement : 3 Kanhaighat coarse sand : 6 graded stone aggrt. of 20 mm
nominal size) i/c finishing the top surface of concrete smooth.
47 2nd class brick masonary 15x15cm open surface drain in c.m. 1: 5(1cem : 125.58 Rmtr 718.000 90166.440
5 Kanhaighat c/sand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem : 5
Kanhaighat c/sand :10gr.st.aggrt.40mm n/size i/c 12mm thick cement
plaster 1: 3 (1cem : 3 Kanhaighat Coarse sand) with a floating coat of
neat cement inside & outside as per standard design.
68 SITC surface mounted LED Down Lighter with white powder coated Al. 78.00 each 2729.000 212862.000
housing with integrated electronic driver 15 W 840 LHEAAGP6IA2W012
complete with connection as rqd. (Havell's)
69 S/F wall mounted 12W 1739193P0 Samondra LED light with high quality 27.00 each 4096.000 110592.000
Anthrasite Al. housing designed with IP 44 with connection etc as reqd.
(Philips)
70 S/F 12W Anthrasite Garden Spike LED light with Al. housing with COB 6.00 each 2304.000 13824.000
integrated lighting with IP 65, Fixture ideal for outdoor & wet areas
complete with connection etc as reqd.(Philips)
71 S/F fan hook i/c bolt & nuts. 3.00 each 57.000 171.000
72 S/F 56"sweep (1400mm) AC ceiling fan complete with down rod,canopy, 3.00 each 3160.000 9480.000
3 (three) bladesetc.as reqd. (Make Bajaj/Usha/Crompton/Orient)
73 S/F stepped type electronic fan regulator on the existing modular plate 3.00 each 690.000 2070.000
sewitch box i/c connection but excluding modular plate etc.
74 SITC 150W energy saving, environment friendly & robust 4.00 each 17663.000 70652.000
highbay(RADIOSO) LED luminaries with high efficiency suitable for
ceiling(Surface/Suspended) Havell's RADIOSOHB 150W LED
75760/75790DBOPC complete with connection as reqd. (Havell's)
75 S/F bus bar chamber with 4 strips copper bus bar length 300mm suitable 2.00 each 7763.000 15526.000
for 200 amp capacity complete with all accessories i/c connection
earthing the body etc.as reqd.
76 S/F wall/floor mounted metal board of welded constn.fabricated with 1.00 m2 4162.000 4162.000
minimum 50mm X 50mm X6mm angle iron frame work with horizontal
and vertical intermediate members of suitable angle/flat iron for mounting
of switch gear i/c painting etc.
77 S/F (following way) single pole and nuetral, sheet steel MCCB 2.00 each 1732.000 3464.000
distributuion board, 240V on surface/recessed complete with tinned
copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic
cover for the MCCB knobs detachable gland plate, interconnection,
phosphatized and powder painted i/c earthing etc as reqd (but without
MCB/RCCB/Isolator) (a) 2+4 way
78 S/F (following way) single pole and nuetral, sheet steel MCCB 4.00 each 1954.000 7816.000
distributuion board, 240V on surface/recessed complete with tinned
copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic
cover for the MCCB knobs detachable gland plate, interconnection,
phosphatized and powder painted i/c earthing etc as reqd (but without
MCB/RCCB/Isolator) (a) 2+6 way
79 S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and
other load of (following poles) in the existing MCB DB complete with
connection testing and commissioning etc.as reqd. (a) Single pole
84 Earthing with copper plate 600x600x6mm thick i/c accessories and 2.00 set 13070.000 26140.000
providing masonary enclosure with copper plate having locking
arrangement and watering pipes etc.(but without charcoal and salt
complete as reqd.)
85 Extra for charcoal and salt for G.I.plates or copper plate earth electrode 2.00 set 2779.000 5558.000
as reqd.
86 P/F 4.06mm dia.copper wire on surface or in recess for loop earthing 20.00 mt 135.000 2700.000
etc.as reqd.
87 Supplying & installation of ABC type 4kg capacity fire extinguisher 6.00 each 4212.000 25272.000
(Repidex) etc as reqd. (ISI marked).
88 Supplying & installation of carbon dioxide type fire extinguisher suitable 6.00 each 9025.000 54150.000
for fires involving materials like oil, electric & delicate machineries)
capacity: 4.5 kg (ISI marked)(Repidex).
89 SH-B: Construction of Olympic Ring
90 SH : EARTH WORK
91 Earth work in excavation in foundation trenches or drains i/c dressing of 227.52 m3 157.000 35720.640
sides and ramming of bottoms,including getting out the excavated soil
and disposal of surplus excavated soil as directed within a lead to 50 m.in
Hard dense soil. (a) Lift above 1.5 m
92 Filling available excavated earth (excluding rock) in trenches, plinth sides 68.25 m3 164.000 11193.000
of foundation etc. in layers not exceeding 20cm in depth consolidating
each deposited layer by ramming & watering lead upto 50m and lift upto
1.5m.
93 Providing, laying naturally occurred sand gravel Grade -III free from 171.34 m3 1385.000 237305.900
organic or other deleterious constituants including watering
ramming,consolidating in layers not exceeding 150mm (Spread
thickness)and dressing etc. complete as directed by the Engineer-in-
charge
94 SH : CONCRETE WORKS
95 P/L cement concrete in foundation and plinth excluding the cost of 27.77 m3 10564.000 293362.280
centering and shuttering : - (a) 1:4:8 (1 cem :4 Kanhaighat coarse sand::
8 graded stone aggrt. 40mm nominal size).
96 SH : R.C.C. WORKS
97 Providing and laying in position specified grade of reinforced cement 41.53 m3 16544.000 687072.320
concrete, excluding the cost of centering, shuttering, finishing and
reinforcement - All work up to plinth level : (a)1:1:2 (1 cement :1
Kanhaighat coarse sand:2 graded stone aggregate 20 mm nominal size.)
98 RCC work in in walls (any thickness), including attached pilasters, 14.95 m3 17656.000 263957.200
buttresses, plinth and string ourses,fillets,columns, pillars, piers,abutment,
posts and struts etc. upto floor five level excluding the cost of centering,
shuttering ,finishing and reinforcement (a) 1:1:2 (1 cement : 1 Kanhaighat
coarse sand: : 2 graded stone aggrt. 20mm nominal size).
99 RCC work in beams, suspended floors, roofs having slope upto 15 degree 35.87 m3 17544.000 629303.280
landings, balconies,shelves,chajjas, lintels,bands,plain window
sill,staircases and spiral staircase upto floor five level but excluding the
cost of centering, shuttering ,finishing and reinforcement (a) 1:1:2 (1
cement : 1 Kanhaighat coarse sand: : 2 graded stone aggrt. 20mm
nominal size).
100 Reinforcement for R.C.C.work including bending,binding and placing in 14100.58 Kg 159.000 2241992.220
position complete
(b) TMT bars.
101 FORM WORKS
102 Providing form work i/c centering & shuttering so as to give a rough finish 168.08 m2 1034.000 173794.720
strutting and propping etc. height of propping and centering below
supporting floor to ceiling not exceeding 4m and removal of the same for
insitu reinforced concrete to and plain concrete work in.(using 12mm
shuttering ply)(a) Foundation footings, bases of columns etc. and mass
concrete.
103 (b) Columns, pillars, posts and struts (square, rectangular or polygon in 120.73 m2 1250.000 150912.500
plan).
104 (c) Sides & soffits of beams, beam haunchings, cantilevers, girders, 158.67 m2 1150.000 182470.500
bressummers and lintels not exceeding 1m in depth.
105 ( d)Flat surface such as suspended floor,roofs,landing & the like ( i) floor 129.31 m2 1257.000 162542.670
etc upto 200mm in thickness
106 (f) Staircases with slopping or stepped soffits including risers & stringers 33.97 m2 886.000 30097.420
excluding landing.
107 (e)Edges of slab and breaks in floors and walls (i) Under 20cm wide 74.06 Rm 295.000 21847.700
112 Providing and laying vitrified tiles in different sizes (thickness 8 mm thick) 1.16 m2 5202.000 6034.320
with water absorption less than 0.08% and conforming to IS 15622,of
approved brand and manufacturer ,in all colours & shades,in
skirting ,riser of steps laid with cement based high polymer modified
quick set tile adhesive.(i)size of tile-600x600mm (Double
charged)branded
113 Granite stone slab flooring over 20 mm (average) thick base of cement 52.64 m2 8981.000 472759.840
mortar 1 : 6 (1 Cement: 6 Kanhaighat coarse sand:) laid and jointed with
grey cement slurry including rubbing and polishing complete with -(a)
Granite slab 20 mm slab thick (i)Jade Black 60 x 120 cm
114 Steel work in built up (square & hollow section) trusses including cutting, 1302.50 kg 231.000 300877.500
hoisting, fixing in position and applying a coat of approved steel primer
red oxide chrom primer conforming to IS 2079, welded and bolted
incluiding special shape washer etc. complete.
115 Providing and fixing false ceiling at all height including providing and 8.36 Sqm 2467.000 20624.120
fixing of frame work made of special section, power pressed from MS
sheets and galvanized with zinc coating of 120 gms/sqm (both side
inclusive) as per IS:277 and consisting of angle cleats of size 25 mm wide
X 1.6 mm thick with flages of 27mm and 30 mm long, the perimeter of
ceiling fixing to wall/partition with the help of rawl plugs at 450 mm centre
with 25 mm long dry wall screws @ 230 mm interval, including fixing of
gypsum board to i) Fully Perforated Gypsum Plaster Board of size
1200X2400X12.5 mm having approx. 15% perforated area with
perforation size and pattern as approved by the Engineer-in charge.
118 15mm cement plaster 1:4 (1 cement : 4 Kanhaighat coarse sand:). 145.33 m2 370.000 53772.100
119 Painting on wall with (two coats) of plastic emulsion paint of approved 140.68 m2 157.000 22086.760
quality in all shades on new work to give an even shade.
120 Providing and applying wall putty/plaster of paris putty of 2 mm thickness 140.68 m2 230.000 32356.400
over plaster surface to prepared the surface even and smooth complete.
121 Applying one coat of cement primer of approved quality on wall surface. 286.01 m2 46.000 13156.460
122 Finishing walls weather shield paint of approved quality on new work 145.33 m2 342.000 49702.860
( three or more coats ) to give an even shade.
123 Providing under layer for plinth protection of 75 mm thick (unconsolidated) 32.71 m2 392.000 12822.320
of stone aggrt. 40 mm nominal size wall rammed & consolidated &
grouted with fine sand i/c finishing the top of concrete smooth.
124 Providing plinth protection 50 mm thick in cement concrete 1: 3 : 6 (1 32.71 m2 527.000 17238.170
cement : 3 Kanhaighat sand : 6 graded stone aggrt. of 20 mm nominal
size) i/c finishing the top surface of concrete smooth.
125 2nd class brick masonary 15x15cm open surface drain in c.m. 1: 5(1cem : 54.52 Rm 718.000 39145.360
5 Kanhaighat sand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem : 5
Kanhaighat sand :10gr.st.aggrt.40mm n/size i/c 12mm thick cement
plaster 1: 3 (1cem : 3 Kanhaighat sand) with a floating coat of neat
cement inside & outside as per standard design.
126 Providing and fixing steel gate by using 50x50x3 mm sqm bar as as main 5.89 m2 8059.000 47467.510
bars horizontally and 25x25mm solid square bar vertically and 25x 8 mm
as decorative bar readily available at market i/c priming , painting etc
completed as per direction of Engineer -in-charge.
127 Fabrication, supplying, installation and commissioning of LED signage 5.00 Nos 117600.000 588000.000
board of 5 Olympic Rings of total size of 20' outer Día & 16'5" inner Dia
with Five Colour( Blue, Yellow,Black,Green & Red) acrylic and ACP
sheets. LED of each ring shall be of 12V waterproof LEDs (preferably
Samsung and Havells Cables). LED for each ring shall have 3 rows
equally spaced. Colour of emission will be Blue, Yellow,Black,Green &
Red Colour with white background. The Ring structure to be installed on
the top of the Qlmp[ic Ring building shall withstand 200 km/hr wind
velocity. All materials shall be as per the technical specifications of the
tender and got approved before start of fabrication and installation.MS
Frame Work Paid Separately
128 Design supply & installation of suspended Spider Glazing system 21.58 Sqm 8641.000 186472.780
designed to withstand the wind pressure as per IS 875 (Part-III). The
Suspended System held with Spider Fittings of SS-316 Grade Steel of
approved manufacturer with glass panel having 12 mm thick clear
toughened glass held together with SS- 316 Grade Stainless steel Spider
& bolt assembly with laminated glass fins 21 mm thick. The Glass fins and
glass panel assembly shall be connected to Slab/ beams by means of
SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom
using SS channel of 50x25x2mm using fastener & anchor bolts, non
staining weather sealants of approved make, Teflon/ nylon bushes and
separators to prevent bi-metalliccontacts, all complete to perform as per
specification and approved drawings. The complete system to be
designed to accommodate thermal expansion & seismic movements etc.
The joints between glass panels (6 to 8 mm) and gaps at the perimeter &
in U channel of the assembly to be filled with non staining weather
sealant, so as to make the entire system fully water proof & dust
proof.The rate shall include all design, Engineering and shop drawing
including approval from structural designer, labour, T&P, scaffolding,
other incidental charges including wastage, enabling temporary services
all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS
channel laminated glass etc. all complete. For the purpose of payment,
actual elevation area of Glazing including thickness of joints and the
portion of Glass panel inside the SS channel shall be measured.
129 SH:-Providing IEI in the Olympic Ring
130 Wiring for light point/fan point/exhaust fan point/call bell point with
1.5mm2 FR PVC insulated copper conductor single core cable in
surface/recessed PVC conduit with modular type switch, modular
plate suitable size MS-box and earthing the point with 1.5mm2 FR
PVC insulated copper conductor single core cable etc.as reqd.
146 S/F brass batten/angle holder i/c connection etc.as reqd. 3.00 each 68.000 204.000
147 S/F 12W LED bulb. 3.00 each 524.000 1572.000
148 SITC surface mounted LED Down Lighter with white powder coated Al. 7.00 each 2729.000 19103.000
housing with integrated electronic driver 15 W 840 LHEAAGP6IA2W012
complete with connection as rqd. (Havell's)
149 S/F 48"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 1.00 each 2818.000 2818.000
3 (three) bladesetc.as reqd. (Make Bajaj/Usha/Crompton/Orient)
150 S/F stepped type electronic fan regulator on the existing modular plate 1.00 each 690.000 690.000
sewitch box i/c connection but excluding modular plate etc.
151 S/F fan hook i/c bolt & nuts. 1.00 each 57.000 57.000
152 P/F 30 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling 1.00 each 1932.000 1932.000
holes on the board connection, earthing the body etc.as reqd.
153 S/F (following way) single pole and nuetral, sheet steel MCCB 1.00 each 1732.000 1732.000
distributuion board, 240V on surface/recessed complete with tinned
copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic
cover for the MCCB knobs detachable gland plate, interconnection,
phosphatized and powder painted i/c earthing etc as reqd (but without
MCB/RCCB/Isolator) (a) 2+4 way single door
154 S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and 0 0.000
other load of (following poles) in the existing MCB DB complete with
connection testing and commissioning etc.as reqd. (a) Single pole
155 (a)10 amp MCB "C" Curve 2.00 each 472.000 944.000
156 (a)20 amp MCB "C" Curve 2.00 each 481.000 962.000
157 Supplying & fixing (following rating) double pole 240V isolator in existing 1.00 each 852.000 852.000
MCB DB complete with connection testing & commissioning as reqd. (a)
40 amp
158 P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm 2.00 each 1072.000 2144.000
in size wooden board complete with locking arrangement and painting etc.
159 Earthing with copper plate 600x600x6mm thick i/c accessories and 1.00 set 13070.000 13070.000
providing masonary enclosure with copper plate having locking
arrangement and watering pipes etc.(but without charcoal and salt
complete as reqd.)
160 Extra for charcoal and salt for G.I.plates or copper plate earth electrode 1.00 set 2779.000 2779.000
as reqd.
161 P/F 4.06mm dia.copper wire on surface or in recess for loop earthing 20.00 mt 135.000 2700.000
etc.as reqd.
162 SH-C: Construction of Restaurant 0 0.000
163 SH : EARTH WORK 0 0.000
164 Earth work in excavation in foundation trenches or drains i/c dressing of 739.42 m3 157.000 116088.940
sides and ramming of bottoms,including getting out the excavated soil
and disposal of surplus excavated soil as directed within a lead to 50 m.in
Hard dense soil. (a) Lift above 1.5 m
165 Filling available excavated earth (excluding rock) in trenches, plinth sides 246.47 m3 164.000 40421.080
of foundation etc. in layers not exceeding 20cm in depth consolidating
each deposited layer by ramming & watering lead upto 50m and lift upto
1.5m.
166 Providing, laying naturally occurred sand gravel Grade -III free from 4.01 m3 1385.000 5553.850
organic or other deleterious constituants including watering
ramming,consolidating in layers not exceeding 150mm (Spread
thickness)and dressing etc. complete as directed by the Engineer-in-
charge
169 (b) 1:3:6 (1 cem :3 Coarse sand:6 graded stone aggrt.40mm n/size). 2.08 m3 10113.000 21035.040
170 (b) 1:2:4 (1 cem :2 Kanhaighat coarse sand::4 graded stone aggrt.20mm 2.65 m3 13976.000 37036.400
n/size).
174 RCC work in beams, suspended floors, roofs having slope upto 15 degree 98.38 m3 17544.000 1725978.720
landings, balconies,shelves,chajjas, lintels,bands,plain window
sill,staircases and spiral staircase upto floor five level but excluding the
cost of centering, shuttering ,finishing and reinforcement (a) 1:1:2 (1
cement : 1 Kanhaighat coarse sand: : 2 graded stone aggrt. 20mm
nominal size).
175 Reinforcement for R.C.C.work including bending,binding and placing in 34313.62 Kg 159.000 5455865.580
position complete
(b) TMT bars.
176 FORM WORKS 0 0.000
177 Providing form work i/c centering & shuttering so as to give a rough finish 510.82 m2 1034.000 528187.880
strutting and propping etc. height of propping and centering below
supporting floor to ceiling not exceeding 4m and removal of the same for
insitu reinforced concrete to and plain concrete work in.(using 12mm
shuttering ply)(a) Foundation footings, bases of columns etc. and mass
concrete.
178 (b) Columns, pillars, posts and struts (square, rectangular or polygon in 444.02 m2 1250.000 555025.000
plan).
179 (c) Sides & soffits of beams, beam haunchings, cantilevers, girders, 222.29 m2 1150.000 255633.500
bressummers and lintels not exceeding 1m in depth.
180 ( d)Flat surface such as suspended floor,roofs,landing & the like ( i) floor 416.40 m2 1257.000 523414.800
etc upto 200mm in thickness
181 (e)Edges of slab and breaks in floors and walls (i) Under 20cm wide 186.49 Rm 295.000 55014.550
182 (f) Stair case ( excluding landing) slopping or stepped soffits including 32.29 m2 886.000 28608.940
riser and strings etc.
183 BRICKS WORKS 0 0.000
184 2nd class (local first class) brick work in foundation and plinth in cement 6.51 m3 16987.000 110585.370
mortar 1: 4 (1 Cem:4 kanhaighat C/Sand)
185 Half brick masonry 2nd class (local first class) in cement mortar 1:4 (1 214.34 m2 1665.000 356876.100
cement : 4 kanhaighat coarse sand) in superstructure above plinth.
189 Providing 40x3mm flat iron hold fast 40cm long i/c fixing to frames with 70.00 Each 270.000 18900.000
10mm dia bolts, nuts and wooden plugs and embedding to cement
concrete block 30x10x15cm 1:3:6 (1 cement : 3 Kanhaighat coarse sand:
: 6 stone aggrt. 20mm nominal guage).
190 Providing & Fixing M.S. grills of required patern to wooden frames of 1.11 m2 192.000 213.120
windows etc. with M.S. plates at required spacing and frames all round
bar with round headed bolts & nuts or by screws
(b) Ornamental grill
191 Providing & fixing bright finished brass 100 mm door mortice latch with 9.00 Each 1591.000 14319.000
one dead bolt & a pair of levers handles with necessary screws etc.
complete (Indian make of approved quality).
192 Providing and fixing Brass sliding bolts bright finished or black enamelled 9.00 Each 1404.000 12636.000
with nuts & screws etc. complete.(a) 300X16 mm
193 Providing & fixing Brass Tower bolts (barrel type) with screws etc. 0 0.000
complete
194 (b) 100x10 mm 8.00 Each 310.000 2480.000
195 Providing & fixing Brass handles with necessary screws etc. complete. 30.00 Each 183.000 5490.000
(a)125mm
196 Providing and fixing double action hydraulic floor spring of approved 4.00 Each 2060.000 8240.000
brand and manufacture conforming to IS : 6315 , having brand logo
embossed on the body/ plate with double spring mechanism and door
weight upto 125 kg, for doors including cost of cutting floors ,embeding in
floors as required and making good the same matching to the existing
floor finishing and cover plates with brass pivot and single piece M.S.
sheet outer box with slide plate etc. complete as per the direction of
Engineer-in-Charge.
197 Providing and fixing 12 mm thick frameless toughened glass door shutter 59.34 m2 5900.000 350106.000
of approved brand and manufacture, including providing and fixing top &
bottom pivot & spring type fixing arrangement and making necessary
holes etc. for fixing required door fittings, all complete as per direction of
Engineer-in-charge (Door handle, lock and stopper etc.to be paid
separately).
198 Providing and fixing glazing in aluminium door , windows , ventilator 91.11 m2 881.000 80267.910
shutter and partition etc with EPDM rudder / neoprene gasket etc
complete as per the architectural drawing and the directions of engineer
in charge ( Cost of aluminium snap beading shall be paid in basic item ):
With plain glass panes of 4 mm thickness
199 Steel Work welded in built up sections framed work,i/c 52.02 Qtl 12137.000 631366.740
cutting,hoisting,fixing in position & In gratings,framed guard bars,
ladders,railings,brackets and similar works applying a priming coat of red
lead paints. (h) In gratings, framed guard bars, ladder, railling, brackets
and similar works
200 Providing & fixing M.S. round holding down or anchor bolts with nuts & 0.77 Qtl 9459.000 7283.430
washer plates complete.
201 Providing and laying vitrified tiles in different sizes (thickness 8 mm thick) 124.83 m2 5131.000 640502.730
with water absorption less than 0.08% and conforming to IS 15622,of
approved make ,in all colours & shades laid on 20mm thick cement
mortar 1:4 (1 cem : 4 c/sand),i/c routing the joints with white cement &
matching pigments etc,complete
(i)size of tile-600x600mm (Double charged)branded
202 Providing and laying vitrified tiles in different sizes (thickness 8 mm thick) 68.00 m2 5202.000 353736.000
with water absorption less than 0.08% and conforming to IS 15622,of
approved brand and manufacturer ,in all colours & shades,in
skirting ,riser of steps laid with cement based high polymer modified
quick set tile adhesive.(i)size of tile-600x600mm (Double
charged)branded
203 Granite stone slab flooring over 20 mm (average) thick base of cement 625.76 m2 8981.000 5619950.560
mortar 1 : 6 (1 Cement: 6 Kanhaighat coarse sand:) laid and jointed with
grey cement slurry including rubbing and polishing complete with -(a)
Granite slab 20 mm slab thick (i)Jade Black 60 x 120 cm
204 Extra for nosing in marble stone for treads 31.11 Rm 381.000 11852.910
205 Steel work in built up (square & hollow section) trusses including cutting, 5099.78 kg 231.000 1178049.180
hoisting, fixing in position and applying a coat of approved steel primer
red oxide chrom primer conforming to IS 2079, welded and bolted
incluiding special shape washer etc. complete.
206 Providing & fixing of Metal Shingles panel for roofing characterised with 325.51 m2 3710.000 1207642.100
ASTM class A fire rating,with wind resistance in corporating with IECC
solar reflectance index with minimum vapor permeance of 15 under high
temperature along with compatible metal fasteners
207 Providing & fixing 19 mm thick cement fibre board for cushion of roofing 325.51 m2 2328.000 757787.280
as per approved design
208 Supplying and fixing of deck profileof trapezoidal steel profile sheet TR-60 28.04 m2 3489.000 97831.560
with self drilling xylan screw of 68 mm long withPVC washers MS3.16mm
thick bearing end cap edge trim, restraint strap,shear stud etc. Whereever
required as approved by Engineer- in- charge composite with 50mm thick
CC1:2:4 (1 cem:2 Kanhaighat coarse sand : 4 stone aggregate of 20 mm)
rienforcement with a mesh of # 8mm @ 200 mm C/C in both direction and
finished with floating coat of neat cement
209 Providing and fixing 12mm thick HPL Board 10.71 m2 3757.000 40237.470
210 SH : FINISHING 0 0.000
211 12mm cement plaster 1:4 (1 cement : 4 Kanhaighat coarse sand:). 212.06 m2 327.000 69343.620
212 15mm cement plaster 1:4 (1 cement : 4 Kanhaighat coarse sand:). 212.06 m2 370.000 78462.200
213 15 mm cement plaster 1:3(1 cement:3 Kanhaighat coarse sand)finished 57.25 m2 484.000 27709.000
with a floating coat of neat cement.
214 Applying one coat of cement primer of approved quality on wall surface. 882.98 m2 46.000 40617.080
215 Providing and applying wall putty/plaster of paris putty of 2 mm thickness 882.98 m2 230.000 203085.400
over plaster surface to prepared the surface even and smooth complete.
216 Varnishing (two or more coats) with superior Copal varnish of approved 5.53 m2 128.000 707.840
quality i/c sizing on new work.
217 Finishing walls weather shield paint of approved quality on new work 882.98 m2 342.000 301979.160
( three or more coats ) to give an even shade.
218 Painting (two or more coats excluding priming coat) with superior ready 5513.65 m2 113.000 623042.450
mixed paint for steel work of approved quality in all shades on new steel
work to give an even shade.
219 Providing and fixing white vitreous china extended wall mounting water 2.00 Each 22361.000 44722.000
closet of size 780x370x690 mm of approved shape including providing &
fixing white vitreous china cistern with dual flush fitting, of flushing
capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover,
and cistern fittings, nuts, bolts and gasket etc complete.
220 P / F kitchen sink white glazed vitreous china Indian make with RS or CI 2.00 Each 6408.000 12816.000
brackets painted white a pair of 12.5 mm CP brass pillar tap 323mm
rubber plugs and CP brass chain 32mm CP brass waist of standard
pattern 32 mm dia. MI/CP brass traps and unions complete i/c cutting and
making good the walls Indian fittings.a) 610 x 450 x 250 mm
221 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass 4.00 Each 6249.000 24996.000
single hole basin mixer of approved quality and make, including painting
of fittings and brackets, cutting and making good the walls wherever
required:-White Vitreous China Wash basin size 550x400 mm with a 15
mm CP Brass single hole basin mixer
222 Providing and fixing white vitreous china pedestal for wash basin 4.00 Each 2049.000 8196.000
completely recessed at the back for the reception of pipes and fittings.
223 Providing and fixing mirror of superior glass (of approved quality) and of 4.00 Each 3339.000 13356.000
required shape and size with plastic moulded frame of approved make
and shade with 6 mm thick hard board backing :
224 Providing and fixing 600 x120 x 5 mm glass shelf (Indian make) with C.P. 4.00 Each 941.000 3764.000
brass brackets guard nail complete fixed to wooden cleats with C.P. brass
screws.
225 Providing and fixing 610 x 20 mm Diplomat brass towel rail complete with 6.00 Each 1039.000 6234.000
C.P. brass brackets fixed to wooden cleats with C.P. brass screws
226 Providing and fixing C.P. brass toilet paper holder 2.00 Each 601.000 1202.000
227 Providing and fixing liquid soap container of glass with C.P. lid and 6.00 Each 1300.000 7800.000
brackets fixed to wooden cleats with C.P. brass screws.
228 Providing and fixing brass bib cock of approved quality. 10.00 Each 830.000 8300.000
25 mm diameter (Swan neck left/right HN Delux)
229 Providing and fixing brass stop cock of approved quality.50 mm diameter 20.00 Each 1383.000 27660.000
230 Providing and fixing brass full way G.M valve with CI wheel of approved 2.00 Each 2176.000 4352.000
quality.50 mm diameter
231 Providing and fixing Water Storage Tanks with 400 mm diameter nominal 1.00 Each 1660.000 1660.000
base G.I. overflow tube 25 mm nominal G.I. inlet and 15 mm nominal G.I.
outlet tube i/c hoisting a height of 10 m above ground level.2000 litres net
capacity storage tanks
232 P/F 110 mm PVC soil waste and vent pipe 10.00 Rm 34899.000 348990.000
233 P/F 75 mm PVC soil waste and vent pipe 10.00 Rm 578.000 5780.000
234 P/F 110mm PVC plain bend of required degree 6.00 Each 566.000 3396.000
235 P/F socket joints to 110 mm PVC pipes 6.00 Each 205.000 1230.000
236 P/F plain Tee to 110 mm PVC pipes 6.00 Each 286.000 1716.000
240 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having 40.00 Rm 355.000 14200.000
thermal stability for hot & cold water supply including all CPVC plain &
brass threaded fittings This includes jointing of pipes & fittings with one
step CPVC solvent cement, trenching, refilling & testing of joints complete
as per direction of Engineer in Charge.External work 25 mm nominal
outer dia Pipes
259 P/L 50mm2 four core pvc ins.(heavy duty) Al. cond. armoured cable of 100.00 mt 707.000 70700.000
1.IKV grade in size not exceedng 25mm2 direct in ground i/c excavation,
sand cushioning protective covering and refilling the trench etc.as reqd.
260 SITC surface mounted LED Down Lighter with white powder coated Al. 33.00 each 2729.000 90057.000
housing with integrated electronic driver 15 W 840 LHEAAGP6IA2W012
complete with connection as rqd. (Havell's)
261 S/F Blithe Pendant 3XE27 LED bulb capacity light model no 58076 with 11.00 each 10240.000 112640.000
Metal/Al shade housing complete with connection etc as reqd.(Philips)
(excluding bulb)
262 S/F Gleam Pendant 1XE27 LED bulb capacity light model no 58125 with 4.00 each 4864.000 19456.000
Stainless steel complete with connection etc as reqd.(Philips)(excluding
bulb)
263 S/F 9W LED bulb 37.00 each 524.000 19388.000
264 S/F 48"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 10.00 each 2818.000 28180.000
3 (three) bladesetc.as reqd. (Make Bajaj/Usha/Crompton/Orient)
265 S/F stepped type electronic fan regulator on the existing modular plate 10.00 each 690.000 6900.000
sewitch box i/c connection but excluding modular plate etc.
266 S/F fan hook i/c bolt & nuts. 10.00 each 57.000 570.000
267 Installation of exhaust fan upto 450mm sweep in the existing opening i/c 4.00 each 360.000 1440.000
making the hole to suit the size of the above fan, making good the
damaged, connection testing commissioning etc. as reqd.
268 S/F 305mm sweep exhaust fan complete with accessories i/c connection 4.00 each 4133.000 16532.000
etc. as reqd.
269 SITC 50W LED 5000K energy saving IP 65 Flood Light luminaries with 4.00 each 5760.000 23040.000
high power LED as light source Havell's JETACOMPECTOFL50W LED
757LTG complete with connection as rqd. (Havell's)
270 S/F bus bar chamber with 4 strips copper bus bar length 300mm suitable 1.00 each 5856.000 5856.000
for 100 amp capacity complete with all accessories i/c connection
earthing the body etc.as reqd.
271 S/F wall/floor mounted metal board of welded constn.fabricated with 0.50 m2 4162.000 2081.000
minimum 50mm X 50mm X6mm angle iron frame work with horizontal
and vertical intermediate members of suitable angle/flat iron for mounting
of switch gear i/c painting etc.
272 S/F (following way) single pole and nuetral, sheet steel MCCB 3.00 each 1732.000 5196.000
distributuion board, 240V on surface/recessed complete with tinned
copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic
cover for the MCCB knobs detachable gland plate, interconnection,
phosphatized and powder painted i/c earthing etc as reqd (but without
MCB/RCCB/Isolator) (a) 2+4 way single door
273 S/F (following way) single pole and nuetral, sheet steel MCCB 1.00 each 1954.000 1954.000
distributuion board, 240V on surface/recessed complete with tinned
copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic
cover for the MCCB knobs detachable gland plate, interconnection,
phosphatized and powder painted i/c earthing etc as reqd (but without
MCB/RCCB/Isolator) (a) 2+6 way single door
274 S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other 6.00 each 339.000 2034.000
load of (following poles) in the existing MCB DB complete with connection
testing and commissioning etc.as reqd. (a) Single pole
275 (a)10 amp MCB "C" Curve 6.00 each 472.000 2832.000
276 (a)20 amp MCB "C" Curve 12.00 each 481.000 5772.000
277 Supplying & fixing (following rating) double pole 240V isolator in existing 4.00 each 852.000 3408.000
MCB DB complete with connection testing & commissioning as reqd. (a)
40 amp
278 P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm 5.00 each 1072.000 5360.000
in size wooden board complete with locking arrangement and painting etc.
279 Earthing with copper plate 600x600x6mm thick i/c accessories and 1.00 set 13070.000 13070.000
providing masonary enclosure with copper plate having locking
arrangement and watering pipes etc.(but without charcoal and salt
complete as reqd.)
280 Extra for charcoal and salt for G.I.plates or copper plate earth electrode 1.00 set 2779.000 2779.000
as reqd.
281 P/F 4.06mm dia.copper wire on surface or in recess for loop earthing 20.00 mt 135.000 2700.000
etc.as reqd.
282 Supplying & installation of ABC type 4kg capacity fire extinguisher 3.00 each 4212.000 12636.000
(Repidex) etc as reqd. (ISI marked).
283 Supplying & installation of carbon dioxide type fire extinguisher suitable 3.00 each 9025.000 27075.000
for fires involving materials like oil, electric & delicate machineries)
capacity: 4.5 kg (ISI marked)(Repidex).
284 SH-D:Construction of DG Room& Electrical 0 0.000
285 SH : EARTH WORK 0 0.000
286 Earth work in excavation in foundation trenches or drains i/c dressing of 29.85 m3 157.000 4686.450
sides and ramming of bottoms,including getting out the excavated soil
and disposal of surplus excavated soil as directed within a lead to 50 m.in
Hard dense soil. (a) Lift above 1.5 m
287 Filling available excavated earth (excluding rock) in trenches, plinth sides 8.96 m3 164.000 1469.440
of foundation etc. in layers not exceeding 20cm in depth consolidating
each deposited layer by ramming & watering lead upto 50m and lift upto
1.5m.
288 Providing, laying naturally occurred sand gravel Grade -III free from 47.97 m3 1385.000 66438.450
organic or other deleterious constituants including watering
ramming,consolidating in layers not exceeding 150mm (Spread
thickness)and dressing etc. complete as directed by the Engineer-in-
charge
289 SH : CONCRETE WORKS 0 0.000
290 P/L cement concrete in foundation and plinth excluding the cost of 12.76 m3 10564.000 134796.640
centering and shuttering : - (a) 1:4:8 (1 cem :4 Kanhaighat coarse sand::
8 graded stone aggrt. 40mm nominal size).
293 RCC work in in walls (any thickness), including attached pilasters, 1.65 m3 17656.000 29132.400
buttresses, plinth and string ourses,fillets,columns, pillars, piers,abutment,
posts and struts etc. upto floor five level excluding the cost of centering,
shuttering ,finishing and reinforcement (a) 1:1:2 (1 cement : 1 Kanhaighat
coarse sand: : 2 graded stone aggrt. 20mm nominal size).
294 RCC work in beams, suspended floors, roofs having slope upto 15 degree 6.31 m3 17544.000 110702.640
landings, balconies,shelves,chajjas, lintels,bands,plain window
sill,staircases and spiral staircase upto floor five level but excluding the
cost of centering, shuttering ,finishing and reinforcement (a) 1:1:2 (1
cement : 1 Kanhaighat coarse sand: : 2 graded stone aggrt. 20mm
nominal size).
295 Reinforcement for R.C.C.work including bending,binding and placing in 4186.55 Kg 159.000 665661.450
position complete
(b) TMT bars.
296 FORM WORKS 0 0.000
297 Providing form work i/c centering & shuttering so as to give a rough finish 41.93 m2 1034.000 43355.620
strutting and propping etc. height of propping and centering below
supporting floor to ceiling not exceeding 4m and removal of the same for
insitu reinforced concrete to and plain concrete work in.(using 12mm
shuttering ply)(a) Foundation footings, bases of columns etc. and mass
concrete.
298 (b) Columns, pillars, posts and struts (square, rectangular or polygon in 32.92 m2 1250.000 41150.000
plan).
299 (c) Sides & soffits of beams, beam haunchings, cantilevers, girders, 19.20 m2 1150.000 22080.000
bressummers and lintels not exceeding 1m in depth.
303 Providing and laying vitrified tiles in different sizes (thickness 8 mm thick) 18.58 m2 5131.000 95333.980
with water absorption less than 0.08% and conforming to IS 15622,of
approved make ,in all colours & shades laid on 20mm thick cement
mortar 1:4 (1 cem : 4 c/sand),i/c routing the joints with white cement &
matching pigments etc,complete
(i)size of tile-600x600mm (Double charged)branded
304 Providing and laying vitrified tiles in different sizes (thickness 8 mm thick) 1.83 m2 5202.000 9519.660
with water absorption less than 0.08% and conforming to IS 15622,of
approved brand and manufacturer ,in all colours & shades,in
skirting ,riser of steps laid with cement based high polymer modified
quick set tile adhesive.(i)size of tile-600x600mm (Double
charged)branded
305 Steel work in built up (square & hollow section) trusses including cutting, 4163.62 kg 231.000 961796.220
hoisting, fixing in position and applying a coat of approved steel primer
red oxide chrom primer conforming to IS 2079, welded and bolted
incluiding special shape washer etc. complete.
306 Providing and fixing false ceiling at all height including providing and 18.58 Sqm 2467.000 45836.860
fixing of frame work made of special section, power pressed from MS
sheets and galvanized with zinc coating of 120 gms/sqm (both side
inclusive) as per IS:277 and consisting of angle cleats of size 25 mm wide
X 1.6 mm thick with flages of 27mm and 30 mm long, the perimeter of
ceiling fixing to wall/partition with the help of rawl plugs at 450 mm centre
with 25 mm long dry wall screws @ 230 mm interval, including fixing of
gypsum board to i) Fully Perforated Gypsum Plaster Board of size
1200X2400X12.5 mm having approx. 15% perforated area with
perforation size and pattern as approved by the Engineer-in charge.
307 Providing & fixing of Metal Shingles panel for roofing characterised with 45.97 m2 3710.000 170548.700
ASTM class A fire rating,with wind resistance in corporating with IECC
solar reflectance index with minimum vapor permeance of 15 under high
temperature along with compatible metal fasteners
308 Providing & fixing 19 mm thick cement fibre board for cushion of roofing 45.97 m2 2328.000 107018.160
as per approved design
309 Trapzoidal Pre-painted Profile Sheet for Ridges, Gutter or valley 610 mm 18.13 Rm 333.000 6037.290
wide of approved brand DYNA Roof or equivalent fixed with selt drilling
screws of 68 mm long Xylon coated screw with PVC washer & cap
complete excluding the coat of purlins rafter & trusses.a) Pre painted
alvalume sheet(PPGL) i) Sheet 0.50mm/4.2 kgs/sqm
310 Providing and fixing 12mm thick HPL Board 18.29 m2 3757.000 68715.530
311 SH : FINISHING 0 0.000
312 12mm cement plaster 1:4 (1 cement : 4 Kanhaighat coarse sand:). 56.30 m2 327.000 18410.100
313 15mm cement plaster 1:4 (1 cement : 4 Kanhaighat coarse sand:). 56.30 m2 370.000 20831.000
314 Painting on wall with (two coats) of plastic emulsion paint of approved 56.30 m2 157.000 8839.100
quality in all shades on new work to give an even shade.
315 Applying one coat of cement primer of approved quality on wall surface. 112.60 m2 46.000 5179.600
316 Providing and applying wall putty/plaster of paris putty of 2 mm thickness 56.30 m2 230.000 12949.000
over plaster surface to prepared the surface even and smooth complete.
317 Finishing walls weather shield paint of approved quality on new work 56.30 m2 342.000 19254.600
( three or more coats ) to give an even shade.
318 Providing under layer for plinth protection of 75 mm thick (unconsolidated) 10.97 m2 392.000 4300.240
of stone aggrt. 40 mm nominal size wall rammed & consolidated &
grouted with fine sand i/c finishing the top of concrete smooth.
319 Providing plinth protection 50 mm thick in cement concrete 1: 3 : 6 (1 10.97 m2 527.000 5781.190
cement : 3 Kanhaighat sand : 6 graded stone aggrt. of 20 mm nominal
size) i/c finishing the top surface of concrete smooth.
320 2nd class brick masonary 15x15cm open surface drain in c.m. 1: 5(1cem : 18.29 Rm 718.000 13132.220
5 Kanhaighat sand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem : 5
Kanhaighat sand :10gr.st.aggrt.40mm n/size i/c 12mm thick cement
plaster 1: 3 (1cem : 3 Kanhaighat sand) with a floating coat of neat
cement inside & outside as per standard design.
336 S/F brass batten/angle holder i/c connection etc.as reqd. 3.00 each 68.000 204.000
337 S/F 12W LED bulb. 3.00 each 524.000 1572.000
338 SITC 50W LED 5000K energy saving IP 65 Flood Light luminaries with 2.00 each 5760.000 11520.000
high power LED as light source Havell's JETACOMPECTOFL50W LED
757LTG complete with connection as rqd. (Havell's)
343 4. Prewired module Ammeter, voltmeter with selector switch and 1.00 each 191682.000 191682.000
indicator lamp (Digital)
344 S/F 200 amp Kit Kat Fuse 8.00 each 1651.000 13208.000
345 S/F (following way) single pole and nuetral, sheet steel MCCB 1.00 each 1732.000 1732.000
distributuion board, 240V on surface/recessed complete with tinned
copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic
cover for the MCCB knobs detachable gland plate, interconnection,
phosphatized and powder painted i/c earthing etc as reqd (but without
MCB/RCCB/Isolator) (a) 2+4 way single door
346 S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and 0 0.000
other load of (following poles) in the existing MCB DB complete with
connection testing and commissioning etc.as reqd. (a) Single pole
347 (a)10 amp MCB "C" Curve 2.00 each 472.000 944.000
348 (a)20 amp MCB "C" Curve 2.00 each 481.000 962.000
349 Supplying & fixing (following rating) double pole 240V isolator in existing 1.00 each 852.000 852.000
MCB DB complete with connection testing & commissioning as reqd. (a)
40 amp
350 P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm 1.00 each 1072.000 1072.000
in size wooden board complete with locking arrangement and painting etc.
351 Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories 1.00 set 4557.000 4557.000
and providing masonary enclosure with cover plate having locking
arrangement and watering pipe etc.as reqd.
352 Extra for using salt and charcoal for pipe electrode as reqd. 1.00 set 1810.000 1810.000
353 P/F 4.06mm dia.copper wire on surface or in recess for loop earthing 20.00 mt 135.000 2700.000
etc.as reqd.
354 Supplying & installation of ABC type 4kg capacity fire extinguisher 2.00 each 4212.000 8424.000
(Repidex) etc as reqd. (ISI marked).
355 Supplying & installation of carbon dioxide type fire extinguisher suitable 2.00 each 9025.000 18050.000
for fires involving materials like oil, electric & delicate machineries)
capacity: 4.5 kg (ISI marked)(Repidex).
356 SH-E:Construction of Wash Room 0 0.000
357 SH : EARTH WORK 0 0.000
358 Earth work in excavation in foundation trenches or drains i/c dressing of 76.41 m3 157.000 11996.370
sides and ramming of bottoms,including getting out the excavated soil
and disposal of surplus excavated soil as directed within a lead to 50 m.in
Hard dense soil. (a) Lift above 1.5 m
359 Filling available excavated earth (excluding rock) in trenches, plinth sides 24.26 m3 164.000 3978.640
of foundation etc. in layers not exceeding 20cm in depth consolidating
each deposited layer by ramming & watering lead upto 50m and lift upto
1.5m.
360 Providing, laying naturally occurred sand gravel Grade -III free from 42.34 m3 1385.000 58640.900
organic or other deleterious constituants including watering
ramming,consolidating in layers not exceeding 150mm (Spread
thickness)and dressing etc. complete as directed by the Engineer-in-
charge
361 SH : CONCRETE WORKS 0 0.000
362 P/L cement concrete in foundation and plinth excluding the cost of 27.05 m3 10564.000 285756.200
centering and shuttering : - (a) 1:4:8 (1 cem :4 Kanhaighat coarse sand::
8 graded stone aggrt. 40mm nominal size).
363 (b) 1:2:4 (1 cem :2 Kanhaighat coarse sand::4 graded stone aggrt.20mm 0.82 m3 13976.000 11460.320
n/size).
366 RCC work in in walls (any thickness), including attached pilasters, 1.65 m3 17656.000 29132.400
buttresses, plinth and string ourses,fillets,columns, pillars, piers,abutment,
posts and struts etc. upto floor five level excluding the cost of centering,
shuttering ,finishing and reinforcement (a) 1:1:2 (1 cement : 1 Kanhaighat
coarse sand: : 2 graded stone aggrt. 20mm nominal size).
367 RCC work in beams, suspended floors, roofs having slope upto 15 degree 13.48 m3 17544.000 236493.120
landings, balconies,shelves,chajjas, lintels,bands,plain window
sill,staircases and spiral staircase upto floor five level but excluding the
cost of centering, shuttering ,finishing and reinforcement (a) 1:1:2 (1
cement : 1 Kanhaighat coarse sand: : 2 graded stone aggrt. 20mm
nominal size).
368 Reinforcement for R.C.C.work including bending,binding and placing in 5161.89 Kg 159.000 820740.510
position complete
(b) TMT bars.
369 FORM WORKS 0 0.000
370 Providing form work i/c centering & shuttering so as to give a rough finish 61.79 m2 1034.000 63890.860
strutting and propping etc. height of propping and centering below
supporting floor to ceiling not exceeding 4m and removal of the same for
insitu reinforced concrete to and plain concrete work in.(using 12mm
shuttering ply)(a) Foundation footings, bases of columns etc. and mass
concrete.
371 (b) Columns, pillars, posts and struts (square, rectangular or polygon in 32.92 m2 1250.000 41150.000
plan).
372 (c) Sides & soffits of beams, beam haunchings, cantilevers, girders, 32.27 m2 1150.000 37110.500
bressummers and lintels not exceeding 1m in depth.
373 ( d)Flat surface such as suspended floor,roofs,landing & the like ( i) floor 17.04 m2 1257.000 21419.280
etc upto 200mm in thickness
374 (e)Edges of slab and breaks in floors and walls (i) Under 20cm wide 31.16 Rm 295.000 9192.200
379 Providing and laying vitrified tiles in different sizes (thickness 8 mm thick) 2.71 m2 5202.000 14097.420
with water absorption less than 0.08% and conforming to IS 15622,of
approved brand and manufacturer ,in all colours & shades,in
skirting ,riser of steps laid with cement based high polymer modified
quick set tile adhesive.(i)size of tile-600x600mm (Double
charged)branded
380 Steel work in built up (square & hollow section) trusses including cutting, 997.61 kg 231.000 230447.910
hoisting, fixing in position and applying a coat of approved steel primer
red oxide chrom primer conforming to IS 2079, welded and bolted
incluiding special shape washer etc. complete.
381 Providing and fixing false ceiling at all height including providing and 39.55 Sqm 2467.000 97569.850
fixing of frame work made of special section, power pressed from MS
sheets and galvanized with zinc coating of 120 gms/sqm (both side
inclusive) as per IS:277 and consisting of angle cleats of size 25 mm wide
X 1.6 mm thick with flages of 27mm and 30 mm long, the perimeter of
ceiling fixing to wall/partition with the help of rawl plugs at 450 mm centre
with 25 mm long dry wall screws @ 230 mm interval, including fixing of
gypsum board to i) Fully Perforated Gypsum Plaster Board of size
1200X2400X12.5 mm having approx. 15% perforated area with
perforation size and pattern as approved by the Engineer-in charge.
382 Providing & fixing of Metal Shingles panel for roofing characterised with 91.95 m2 3710.000 341134.500
ASTM class A fire rating,with wind resistance in corporating with IECC
solar reflectance index with minimum vapor permeance of 15 under high
temperature along with compatible metal fasteners
383 Providing & fixing 19 mm thick cement fibre board for cushion of roofing 91.95 m2 2328.000 214059.600
as per approved design
384 Trapzoidal Pre-painted Profile Sheet for Ridges, Gutter or valley 610 mm 18.13 Rm 333.000 6037.290
wide of approved brand DYNA Roof or equivalent fixed with selt drilling
screws of 68 mm long Xylon coated screw with PVC washer & cap
complete excluding the coat of purlins rafter & trusses.a) Pre painted
alvalume sheet(PPGL) i) Sheet 0.50mm/4.2 kgs/sqm
385 Providing and fixing 12mm thick HPL Board 27.07 m2 3757.000 101701.990
386 SH : FINISHING 0 0.000
387 12mm cement plaster 1:4 (1 cement : 4 Kanhaighat coarse sand:). 100.97 m2 327.000 33017.190
388 15mm cement plaster 1:4 (1 cement : 4 Kanhaighat coarse sand:). 86.79 m2 370.000 32112.300
389 15 mm cement plaster 1:3(1 cement:3 Kanhaighat coarse sand)finished 114.50 m2 484.000 55418.000
with a floating coat of neat cement.
390 Painting on wall with (two coats) of plastic emulsion paint of approved 100.97 m2 157.000 15852.290
quality in all shades on new work to give an even shade.
391 Providing and applying wall putty/plaster of paris putty of 2 mm thickness 100.97 m2 230.000 23223.100
over plaster surface to prepared the surface even and smooth complete.
392 Applying one coat of cement primer of approved quality on wall surface. 187.76 m2 46.000 8636.960
393 Finishing walls weather shield paint of approved quality on new work 86.79 m2 342.000 29682.180
( three or more coats ) to give an even shade.
394 Providing under layer for plinth protection of 75 mm thick (unconsolidated) 16.24 m2 392.000 6366.080
of stone aggrt. 40 mm nominal size wall rammed & consolidated &
grouted with fine sand i/c finishing the top of concrete smooth.
395 Providing plinth protection 50 mm thick in cement concrete 1: 3 : 6 (1 16.24 m2 527.000 8558.480
cement : 3 Kanhaighat sand : 6 graded stone aggrt. of 20 mm nominal
size) i/c finishing the top surface of concrete smooth.
396 2nd class brick masonary 15x15cm open surface drain in c.m. 1: 5(1cem : 27.07 Rm 718.000 19436.260
5 Kanhaighat sand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem : 5
Kanhaighat sand :10gr.st.aggrt.40mm n/size i/c 12mm thick cement
plaster 1: 3 (1cem : 3 Kanhaighat sand) with a floating coat of neat
cement inside & outside as per standard design.
397 Providing and fixing white vitreous china extended wall mounting water 5.00 Each 22361.000 111805.000
closet of size 780x370x690 mm of approved shape including providing &
fixing white vitreous china cistern with dual flush fitting, of flushing
capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover,
and cistern fittings, nuts, bolts and gasket etc complete.
398 Providing and fixing white vitreous china flat back or wall corner type 4.00 Each 11557.000 46228.000
lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes
respectively with automatic flushing cistern with standard flush pipe and
C.P. brass spreaders with brass unions and G.I clamps complete,
including painting of fittings and brackets, cutting and making good the
walls and floors wherever required :a)Range of three urinal basins with
10litre white P.V.C. automatic flushing cistern
399 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass 4.00 Each 6249.000 24996.000
single hole basin mixer of approved quality and make, including painting
of fittings and brackets, cutting and making good the walls wherever
required:-White Vitreous China Wash basin size 550x400 mm with a 15
mm CP Brass single hole basin mixer
400 Providing and fixing white vitreous china pedestal for wash basin 4.00 Each 2049.000 8196.000
completely recessed at the back for the reception of pipes and fittings.
401 Providing and fixing mirror of superior glass (of approved quality) and of 4.00 Each 3339.000 13356.000
required shape and size with plastic moulded frame of approved make
and shade with 6 mm thick hard board backing :
402 Providing and fixing 600 x120 x 5 mm glass shelf (Indian make) with C.P. 4.00 Each 941.000 3764.000
brass brackets guard nail complete fixed to wooden cleats with C.P. brass
screws.
403 Providing and fixing 610 x 20 mm Diplomat brass towel rail complete with 9.00 Each 1039.000 9351.000
C.P. brass brackets fixed to wooden cleats with C.P. brass screws
404 Providing and fixing C.P. brass toilet paper holder 5.00 Each 601.000 3005.000
405 Providing and fixing liquid soap container of glass with C.P. lid and 4.00 Each 1300.000 5200.000
brackets fixed to wooden cleats with C.P. brass screws.
406 Providing and fixing brass bib cock of approved quality. 10.00 Each 830.000 8300.000
25 mm diameter (Swan neck left/right HN Delux)
407 Providing and fixing brass stop cock of approved quality.50 mm diameter 20.00 Each 1383.000 27660.000
408 Providing and fixing brass full way G.M valve with CI wheel of approved 2.00 Each 2176.000 4352.000
quality.50 mm diameter
409 Providing and fixing Water Storage Tanks with 400 mm diameter nominal 1.00 Each 34899.000 34899.000
base G.I. overflow tube 25 mm nominal G.I. inlet and 15 mm nominal G.I.
outlet tube i/c hoisting a height of 10 m above ground level.2000 litres net
capacity storage tanks
410 P/F 110 mm PVC soil waste and vent pipe 20.00 Rm 578.000 11560.000
411 P/F 75 mm PVC soil waste and vent pipe 20.00 Rm 566.000 11320.000
412 P/F 110mm PVC plain bend of required degree 10.00 Each 205.000 2050.000
413 P/F socket joints to 110 mm PVC pipes 10.00 Each 286.000 2860.000
414 P/F plain Tee to 110 mm PVC pipes 10.00 Each 235.000 2350.000
417 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having 50.00 Rm 356.000 17800.000
thermal stability for hot & cold water supply, including all CPVC plain &
brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.
This includes jointing of pipes & fittings with one step CPVC solvent
cement and the cost of cutting chases and making good the same
including testing of joints complete as per direction of Engineer in
Charge.Concealed work, including cutting chases and making good the
walls etc.15 mm nominal outer dia Pipes
418 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having 40.00 Rm 338.000 13520.000
thermal stability for hot & cold water supply including all CPVC plain &
brass threaded fittings This includes jointing of pipes & fittings with one
step CPVC solvent cement, trenching, refilling & testing of joints complete
as per direction of Engineer in Charge.External work 25 mm nominal
outer dia Pipes
434 SITC surface mounted LED Down Lighter with white powder coated Al. 18.00 each 2729.000 49122.000
housing with integrated electronic driver 15 W 840 LHEAAGP6IA2W012
complete with connection as rqd. (Havell's)
435 S/F (following way) single pole and nuetral, sheet steel MCCB 1.00 each 1732.000 1732.000
distributuion board, 240V on surface/recessed complete with tinned
copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic
cover for the MCCB knobs detachable gland plate, interconnection,
phosphatized and powder painted i/c earthing etc as reqd (but without
MCB/RCCB/Isolator) (a) 2+4 way single door
436 S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and 0 0.000
other load of (following poles) in the existing MCB DB complete with
connection testing and commissioning etc.as reqd. (a) Single pole
437 (a)10 amp MCB "C" Curve 3.00 each 472.000 1416.000
438 (a)20 amp MCB "C" Curve 1.00 each 481.000 481.000
439 Supplying & fixing (following rating) double pole 240V isolator in existing 1.00 each 852.000 852.000
MCB DB complete with connection testing & commissioning as reqd. (a)
40 amp
440 P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm 1.00 each 1072.000 1072.000
in size wooden board complete with locking arrangement and painting etc.
441 Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories 1.00 set 4557.000 4557.000
and providing masonary enclosure with cover plate having locking
arrangement and watering pipe etc.as reqd.
442 Extra for using salt and charcoal for pipe electrode as reqd. 1.00 set 1810.000 1810.000
443 P/F 4.06mm dia.copper wire on surface or in recess for loop earthing 20.00 mt 135.000 2700.000
etc.as reqd.
444 SH-F:Construction of Care Taker 0 0.000
445 SH : EARTH WORK 0 0.000
446 Earth work in excavation in foundation trenches or drains i/c dressing of 43.20 m3 157.000 6782.400
sides and ramming of bottoms,including getting out the excavated soil
and disposal of surplus excavated soil as directed within a lead to 50 m.in
Hard dense soil. (a) Lift above 1.5 m
447 Filling available excavated earth (excluding rock) in trenches, plinth sides 12.96 m3 164.000 2125.440
of foundation etc. in layers not exceeding 20cm in depth consolidating
each deposited layer by ramming & watering lead upto 50m and lift upto
1.5m.
448 Providing, laying naturally occurred sand gravel Grade -III free from 52.59 m3 1385.000 72837.150
organic or other deleterious constituants including watering
ramming,consolidating in layers not exceeding 150mm (Spread
thickness)and dressing etc. complete as directed by the Engineer-in-
charge
453 RCC work in in walls (any thickness), including attached pilasters, 2.47 m3 17656.000 43610.320
buttresses, plinth and string ourses,fillets,columns, pillars, piers,abutment,
posts and struts etc. upto floor five level excluding the cost of centering,
shuttering ,finishing and reinforcement (a) 1:1:2 (1 cement : 1 Kanhaighat
coarse sand: : 2 graded stone aggrt. 20mm nominal size).
454 RCC work in beams, suspended floors, roofs having slope upto 15 degree 7.50 m3 17544.000 131580.000
landings, balconies,shelves,chajjas, lintels,bands,plain window
sill,staircases and spiral staircase upto floor five level but excluding the
cost of centering, shuttering ,finishing and reinforcement (a) 1:1:2 (1
cement : 1 Kanhaighat coarse sand: : 2 graded stone aggrt. 20mm
nominal size).
455 Reinforcement for R.C.C.work including bending,binding and placing in 4849.46 Kg 159.000 771064.140
position complete
(b) TMT bars.
456 FORM WORKS 0 0.000
457 Providing form work i/c centering & shuttering so as to give a rough finish 54.38 m2 1034.000 56228.920
strutting and propping etc. height of propping and centering below
supporting floor to ceiling not exceeding 4m and removal of the same for
insitu reinforced concrete to and plain concrete work in.(using 12mm
shuttering ply)(a) Foundation footings, bases of columns etc. and mass
concrete.
458 (b) Columns, pillars, posts and struts (square, rectangular or polygon in 32.92 m2 1250.000 41150.000
plan).
459 (c) Sides & soffits of beams, beam haunchings, cantilevers, girders, 25.64 m2 1150.000 29486.000
bressummers and lintels not exceeding 1m in depth.
463 Providing and laying vitrified tiles in different sizes (thickness 8 mm thick) 27.16 m2 5131.000 139357.960
with water absorption less than 0.08% and conforming to IS 15622,of
approved make ,in all colours & shades laid on 20mm thick cement
mortar 1:4 (1 cem : 4 c/sand),i/c routing the joints with white cement &
matching pigments etc,complete
(i)size of tile-600x600mm (Double charged)branded
464 Providing and laying vitrified tiles in different sizes (thickness 8 mm thick) 2.16 m2 5202.000 11236.320
with water absorption less than 0.08% and conforming to IS 15622,of
approved brand and manufacturer ,in all colours & shades,in
skirting ,riser of steps laid with cement based high polymer modified
quick set tile adhesive.(i)size of tile-600x600mm (Double
charged)branded
465 Steel work in built up (square & hollow section) trusses including cutting, 987.23 kg 231.000 228050.130
hoisting, fixing in position and applying a coat of approved steel primer
red oxide chrom primer conforming to IS 2079, welded and bolted
incluiding special shape washer etc. complete.
466 Providing and fixing false ceiling at all height including providing and 27.16 Sqm 2467.000 67003.720
fixing of frame work made of special section, power pressed from MS
sheets and galvanized with zinc coating of 120 gms/sqm (both side
inclusive) as per IS:277 and consisting of angle cleats of size 25 mm wide
X 1.6 mm thick with flages of 27mm and 30 mm long, the perimeter of
ceiling fixing to wall/partition with the help of rawl plugs at 450 mm centre
with 25 mm long dry wall screws @ 230 mm interval, including fixing of
gypsum board to i) Fully Perforated Gypsum Plaster Board of size
1200X2400X12.5 mm having approx. 15% perforated area with
perforation size and pattern as approved by the Engineer-in charge.
467 Providing & fixing of Metal Shingles panel for roofing characterised with 45.97 m2 3710.000 170548.700
ASTM class A fire rating,with wind resistance in corporating with IECC
solar reflectance index with minimum vapor permeance of 15 under high
temperature along with compatible metal fasteners
468 Providing & fixing 19 mm thick cement fibre board for cushion of roofing 45.97 m2 2328.000 107018.160
as per approved design
469 Trapzoidal Pre-painted Profile Sheet for Ridges, Gutter or valley 610 mm 18.13 Rm 333.000 6037.290
wide of approved brand DYNA Roof or equivalent fixed with selt drilling
screws of 68 mm long Xylon coated screw with PVC washer & cap
complete excluding the coat of purlins rafter & trusses.a) Pre painted
alvalume sheet(PPGL) i) Sheet 0.50mm/4.2 kgs/sqm
470 Providing and fixing 12mm thick HPL Board 21.64 m2 3757.000 81301.480
471 SH : FINISHING 0 0.000
472 12mm cement plaster 1:4 (1 cement : 4 Kanhaighat coarse sand:). 95.75 m2 327.000 31310.250
473 15mm cement plaster 1:4 (1 cement : 4 Kanhaighat coarse sand:). 69.29 m2 370.000 25637.300
474 Painting on wall with (two coats) of plastic emulsion paint of approved 95.75 m2 157.000 15032.750
quality in all shades on new work to give an even shade.
475 Providing and applying wall putty/plaster of paris putty of 2 mm thickness 95.75 m2 231.000 22118.250
over plaster surface to prepared the surface even and smooth complete.
476 Applying one coat of cement primer of approved quality on wall surface. 165.04 m2 46.000 7591.840
477 Finishing walls weather shield paint of approved quality on new work 69.29 m2 342.000 23697.180
( three or more coats ) to give an even shade.
478 Providing under layer for plinth protection of 75 mm thick (unconsolidated) 12.98 m2 392.000 5088.160
of stone aggrt. 40 mm nominal size wall rammed & consolidated &
grouted with fine sand i/c finishing the top of concrete smooth.
479 Providing plinth protection 50 mm thick in cement concrete 1: 3 : 6 (1 12.98 m2 527.000 6840.460
cement : 3 Kanhaighat sand : 6 graded stone aggrt. of 20 mm nominal
size) i/c finishing the top surface of concrete smooth.
480 2nd class brick masonary 15x15cm open surface drain in c.m. 1: 5(1cem : 21.64 Rm 718.000 15537.520
5 Kanhaighat sand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem : 5
Kanhaighat sand :10gr.st.aggrt.40mm n/size i/c 12mm thick cement
plaster 1: 3 (1cem : 3 Kanhaighat sand) with a floating coat of neat
cement inside & outside as per standard design.
498 S/F brass batten/angle holder i/c connection etc.as reqd. 3.00 each 68.000 204.000
499 S/F 12W LED bulb. 3.00 each 524.000 1572.000
500 SITC surface mounted LED Down Lighter with white powder coated Al. 8.00 each 2729.000 21832.000
housing with integrated electronic driver 15 W 840 LHEAAGP6IA2W012
complete with connection as rqd. (Havell's)
501 S/F 48"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 1.00 each 2818.000 2818.000
3 (three) bladesetc.as reqd. (Make Bajaj/Usha/Crompton/Orient)
502 S/F stepped type electronic fan regulator on the existing modular plate 1.00 each 690.000 690.000
sewitch box i/c connection but excluding modular plate etc.
503 S/F fan hook i/c bolt & nuts. 1.00 each 57.000 57.000
504 Installation of exhaust fan upto 450mm sweep in the existing opening i/c 1.00 each 360.000 360.000
making the hole to suit the size of the above fan, making good the
damaged, connection testing commissioning etc. as reqd.
505 S/F 305mm sweep exhaust fan complete with accessories i/c connection 1.00 each 4133.000 4133.000
etc. as reqd.
506 P/F 30 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling 1.00 each 1932.000 1932.000
holes on the board connection, earthing the body etc.as reqd.
507 S/F (following way) single pole and nuetral, sheet steel MCCB 1.00 each 1732.000 1732.000
distributuion board, 240V on surface/recessed complete with tinned
copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic
cover for the MCCB knobs detachable gland plate, interconnection,
phosphatized and powder painted i/c earthing etc as reqd (but without
MCB/RCCB/Isolator) (a) 2+4 way single door
508 S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and 0 0.000
other load of (following poles) in the existing MCB DB complete with
connection testing and commissioning etc.as reqd. (a) Single pole
509 (a)10 amp MCB "C" Curve 2.00 each 472.000 944.000
510 (a)20 amp MCB "C" Curve 2.00 each 481.000 962.000
511 Supplying & fixing (following rating) double pole 240V isolator in existing 1.00 each 852.000 852.000
MCB DB complete with connection testing & commissioning as reqd. (a)
40 amp
512 P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm 2.00 each 1072.000 2144.000
in size wooden board complete with locking arrangement and painting etc.
513 Earthing with copper plate 600x600x6mm thick i/c accessories and 1.00 set 13070.000 13070.000
providing masonary enclosure with copper plate having locking
arrangement and watering pipes etc.(but without charcoal and salt
complete as reqd.)
514 Extra for charcoal and salt for G.I.plates or copper plate earth electrode 1.00 set 2779.000 2779.000
as reqd.
515 P/F 4.06mm dia.copper wire on surface or in recess for loop earthing 20.00 mt 135.000 2700.000
etc.as reqd.
516 SH-G:Construction of Souvenir shop 0 0.000
517 SH : EARTH WORK 0 0.000
518 Earth work in excavation in foundation trenches or drains i/c dressing of 67.23 m3 157.000 10555.110
sides and ramming of bottoms,including getting out the excavated soil
and disposal of surplus excavated soil as directed within a lead to 50 m.in
Hard dense soil. (a) Lift above 1.5 m
519 Filling available excavated earth (excluding rock) in trenches, plinth sides 20.17 m3 164.000 3307.880
of foundation etc. in layers not exceeding 20cm in depth consolidating
each deposited layer by ramming & watering lead upto 50m and lift upto
1.5m.
520 Providing, laying naturally occurred sand gravel Grade -III free from 68.36 m3 1385.000 94678.600
organic or other deleterious constituants including watering
ramming,consolidating in layers not exceeding 150mm (Spread
thickness)and dressing etc. complete as directed by the Engineer-in-
charge
525 RCC work in in walls (any thickness), including attached pilasters, 4.64 m3 17656.000 81923.840
buttresses, plinth and string ourses,fillets,columns, pillars, piers,abutment,
posts and struts etc. upto floor five level excluding the cost of centering,
shuttering ,finishing and reinforcement (a) 1:1:2 (1 cement : 1 Kanhaighat
coarse sand: : 2 graded stone aggrt. 20mm nominal size).
526 RCC work in beams, suspended floors, roofs having slope upto 15 degree 2.85 m3 17544.000 50000.400
landings, balconies,shelves,chajjas, lintels,bands,plain window
sill,staircases and spiral staircase upto floor five level but excluding the
cost of centering, shuttering ,finishing and reinforcement (a) 1:1:2 (1
cement : 1 Kanhaighat coarse sand: : 2 graded stone aggrt. 20mm
nominal size).
527 Reinforcement for R.C.C.work including bending,binding and placing in 4294.42 Kg 159.000 682812.780
position complete
(b) TMT bars.
528 FORM WORKS 0 0.000
529 Providing form work i/c centering & shuttering so as to give a rough finish 77.80 m2 1034.000 80445.200
strutting and propping etc. height of propping and centering below
supporting floor to ceiling not exceeding 4m and removal of the same for
insitu reinforced concrete to and plain concrete work in.(using 12mm
shuttering ply)(a) Foundation footings, bases of columns etc. and mass
concrete.
530 (b) Columns, pillars, posts and struts (square, rectangular or polygon in 62.40 m2 1250.000 78000.000
plan).
531 (c) Sides & soffits of beams, beam haunchings, cantilevers, girders, 31.40 m2 1150.000 36110.000
bressummers and lintels not exceeding 1m in depth.
535 Providing and fixing 8 mm thick frameless toughened glass door shutter 68.55 m2 5900.000 404445.000
of approved brand and manufacture, including providing and fixing top &
bottom pivot & spring type fixing arrangement and making necessary
holes etc. for fixing required door fittings, all complete as per direction of
Engineer-in-charge (Door handle, lock and stopper etc.to be paid
separately).
536 Providing and fixing glazing in aluminium door , windows , ventilator 68.55 m2 881.000 60392.550
shutter and partition etc with EPDM rudder / neoprene gasket etc
complete as per the architectural drawing and the directions of engineer
in charge ( Cost of aluminium snap beading shall be paid in basic item ):
With plain glass panes of 4 mm thickness
537 Providing and laying vitrified tiles in different sizes (thickness 8 mm thick) 84.07 m2 5131.000 431363.170
with water absorption less than 0.08% and conforming to IS 15622,of
approved make ,in all colours & shades laid on 20mm thick cement
mortar 1:4 (1 cem : 4 c/sand),i/c routing the joints with white cement &
matching pigments etc,complete
(i)size of tile-600x600mm (Double charged)branded
538 Providing and laying vitrified tiles in different sizes (thickness 8 mm thick) 1.88 m2 5202.000 9779.760
with water absorption less than 0.08% and conforming to IS 15622,of
approved brand and manufacturer ,in all colours & shades,in
skirting ,riser of steps laid with cement based high polymer modified
quick set tile adhesive.(i)size of tile-600x600mm (Double
charged)branded
539 Granite stone slab flooring over 20 mm (average) thick base of cement 12.35 m2 8981.000 110915.350
mortar 1 : 6 (1 Cement: 6 Kanhaighat coarse sand:) laid and jointed with
grey cement slurry including rubbing and polishing complete with -(a)
Granite slab 20 mm slab thick (i)Jade Black 60 x 120 cm
540 Steel work in built up (square & hollow section) trusses including cutting, 4163.62 kg 231.000 961796.220
hoisting, fixing in position and applying a coat of approved steel primer
red oxide chrom primer conforming to IS 2079, welded and bolted
incluiding special shape washer etc. complete.
541 Providing and fixing false ceiling at all height including providing and 84.07 Sqm 2467.000 207400.690
fixing of frame work made of special section, power pressed from MS
sheets and galvanized with zinc coating of 120 gms/sqm (both side
inclusive) as per IS:277 and consisting of angle cleats of size 25 mm wide
X 1.6 mm thick with flages of 27mm and 30 mm long, the perimeter of
ceiling fixing to wall/partition with the help of rawl plugs at 450 mm centre
with 25 mm long dry wall screws @ 230 mm interval, including fixing of
gypsum board to i) Fully Perforated Gypsum Plaster Board of size
1200X2400X12.5 mm having approx. 15% perforated area with
perforation size and pattern as approved by the Engineer-in charge.
542 Providing & fixing of Metal Shingles panel for roofing characterised with 156.60 m2 3710.000 580986.000
ASTM class A fire rating,with wind resistance in corporating with IECC
solar reflectance index with minimum vapor permeance of 15 under high
temperature along with compatible metal fasteners
543 Providing & fixing 19 mm thick cement fibre board for cushion of roofing 156.60 m2 2328.000 364564.800
as per approved design
544 Trapzoidal Pre-painted Profile Sheet for Ridges, Gutter or valley 610 mm 100.89 Rm 333.000 33596.370
wide of approved brand DYNA Roof or equivalent fixed with selt drilling
screws of 68 mm long Xylon coated screw with PVC washer & cap
complete excluding the coat of purlins rafter & trusses.a) Pre painted
alvalume sheet(PPGL) i) Sheet 0.50mm/4.2 kgs/sqm
545 Providing and fixing 12mm thick HPL Board 43.86 m2 3757.000 164782.020
546 SH : FINISHING 0 0.000
547 12mm cement plaster 1:4 (1 cement : 4 Kanhaighat coarse sand:). 162.99 m2 327.000 53297.730
548 15mm cement plaster 1:4 (1 cement : 4 Kanhaighat coarse sand:). 162.99 m2 370.000 60306.300
549 Painting on wall with (two coats) of plastic emulsion paint of approved 162.99 m2 157.000 25589.430
quality in all shades on new work to give an even shade.
550 Applying one coat of cement primer of approved quality on wall surface. 162.99 m2 46.000 7497.540
551 Providing and applying wall putty/plaster of paris putty of 2 mm thickness 162.99 m2 231.000 37650.690
over plaster surface to prepared the surface even and smooth complete.
552 Providing under layer for plinth protection of 75 mm thick (unconsolidated) 25.83 m2 392.000 10125.360
of stone aggrt. 40 mm nominal size wall rammed & consolidated &
grouted with fine sand i/c finishing the top of concrete smooth.
553 Providing plinth protection 50 mm thick in cement concrete 1: 3 : 6 (1 25.83 m2 527.000 13612.410
cement : 3 Kanhaighat sand : 6 graded stone aggrt. of 20 mm nominal
size) i/c finishing the top surface of concrete smooth.
554 2nd class brick masonary 15x15cm open surface drain in c.m. 1: 5(1cem : 43.86 Rm 718.000 31491.480
5 Kanhaighat sand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem : 5
Kanhaighat sand :10gr.st.aggrt.40mm n/size i/c 12mm thick cement
plaster 1: 3 (1cem : 3 Kanhaighat sand) with a floating coat of neat
cement inside & outside as per standard design.
572 SITC surface mounted LED Down Lighter with white powder coated Al. 17.00 each 2729.000 46393.000
housing with integrated electronic driver 15 W 840 LHEAAGP6IA2W012
complete with connection as rqd. (Havell's)
573 SITC surface mounted LED Down Lighter with white powder coated Al. 18.00 each 1836.000 33048.000
housing with integrated electronic driver 10W 840 LHEAAGP6IA2W010
complete with connection as rqd. (Havell's)
574 SITC 50W LED 5000K energy saving IP 65 Flood Light luminaries with 4.00 each 5760.000 23040.000
high power LED as light source Havell's JETACOMPECTOFL50W LED
757LTG complete with connection as rqd. (Havell's)
575 S/F (following way) single pole and nuetral, sheet steel MCCB 2.00 each 1954.000 3908.000
distributuion board, 240V on surface/recessed complete with tinned
copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic
cover for the MCCB knobs detachable gland plate, interconnection,
phosphatized and powder painted i/c earthing etc as reqd (but without
MCB/RCCB/Isolator) (a) 2+6 way single door
576 S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and 0 0.000
other load of (following poles) in the existing MCB DB complete with
connection testing and commissioning etc.as reqd. (a) Single pole
577 (a)10 amp MCB "C" Curve 7.00 each 472.000 3304.000
578 (a)20 amp MCB "C" Curve 5.00 each 481.000 2405.000
579 Supplying & fixing (following rating) double pole 240V isolator in existing 2.00 each 852.000 1704.000
MCB DB complete with connection testing & commissioning as reqd. (a)
40 amp
580 P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm 3.00 each 1072.000 3216.000
in size wooden board complete with locking arrangement and painting etc.
581 Earthing with copper plate 600x600x6mm thick i/c accessories and 1.00 set 13070.000 13070.000
providing masonary enclosure with copper plate having locking
arrangement and watering pipes etc.(but without charcoal and salt
complete as reqd.)
582 Extra for charcoal and salt for G.I.plates or copper plate earth electrode 1.00 set 2779.000 2779.000
as reqd.
583 P/F 4.06mm dia.copper wire on surface or in recess for loop earthing 20.00 mt 135.000 2700.000
etc.as reqd.
584 Supplying & installation of ABC type 4kg capacity fire extinguisher 1.00 each 4212.000 4212.000
(Repidex) etc as reqd. (ISI marked).
585 Supplying & installation of carbon dioxide type fire extinguisher suitable 1.00 each 9025.000 9025.000
for fires involving materials like oil, electric & delicate machineries)
capacity: 4.5 kg (ISI marked)(Repidex).
586 SH-H:Construction of Water Fountain 0 0.000
587 SH : EARTH WORK 0 0.000
588 Earth work in excavation in foundation trenches or drains i/c dressing of 9.84 m3 157.000 1544.880
sides and ramming of bottoms,including getting out the excavated soil
and disposal of surplus excavated soil as directed within a lead to 50 m.in
Hard dense soil. (a) Lift above 1.5 m
589 Filling available excavated earth (excluding rock) in trenches, plinth sides 2.95 m3 164.000 483.800
of foundation etc. in layers not exceeding 20cm in depth consolidating
each deposited layer by ramming & watering lead upto 50m and lift upto
1.5m.
590 Providing, laying naturally occurred sand gravel Grade -III free from 44.76 m3 1385.000 61992.600
organic or other deleterious constituants including watering
ramming,consolidating in layers not exceeding 150mm (Spread
thickness)and dressing etc. complete as directed by the Engineer-in-
charge
595 Reinforcement for R.C.C.work including bending,binding and placing in 1487.23 Kg 159.000 236469.570
position complete
(b) TMT bars.
596 FORM WORKS 0 0.000
597 Providing form work i/c centering & shuttering so as to give a rough finish 72.65 m2 1034.000 75120.100
strutting and propping etc. height of propping and centering below
supporting floor to ceiling not exceeding 4m and removal of the same for
insitu reinforced concrete to and plain concrete work in.(using 12mm
shuttering ply)(a) Foundation footings, bases of columns etc. and mass
concrete.
603 Filling available excavated earth (excluding rock) in trenches, plinth sides 9.38 m3 164.000 1538.320
of foundation etc. in layers not exceeding 20cm in depth consolidating
each deposited layer by ramming & watering lead upto 50m and lift upto
1.5m.
611 Steel Work welded in built up sections framed work,i/c 36.83 Qtl 12137.000 447005.710
cutting,hoisting,fixing in position & In gratings,framed guard bars,
ladders,railings,brackets and similar works applying a priming coat of red
lead paints. (h) In gratings, framed guard bars, ladder, railling, brackets
and similar works
612 Providing & fixing M.S. round holding down or anchor bolts with nuts & 2.39 Qtl 9459.000 22607.010
washer plates complete.
613 Painting (two or more coats excluding priming coat) with superior ready 74.55 m2 113.000 8424.150
mixed paint for steel work of approved quality in all shades on new steel
work to give an even shade.
622 (b) 1:2:4 (1 cem :2 Kanhaighat coarse sand::4 graded stone aggrt.20mm 18.42 m3 13976.000 257437.920
n/size).
625 RCC work in in walls (any thickness), including attached pilasters, 18.60 m3 17656.000 328401.600
buttresses, plinth and string ourses,fillets,columns, pillars, piers,abutment,
posts and struts etc. upto floor five level excluding the cost of centering,
shuttering ,finishing and reinforcement (a) 1:1:2 (1 cement : 1 Kanhaighat
coarse sand: : 2 graded stone aggrt. 20mm nominal size).
626 Reinforcement for R.C.C.work including bending,binding and placing in 22003.72 Kg 159.000 3498591.480
position complete
(b) TMT bars.
627 FORM WORKS 0 0.000
628 Providing form work i/c centering & shuttering so as to give a rough finish 1412.81 m2 1034.000 1460845.540
strutting and propping etc. height of propping and centering below
supporting floor to ceiling not exceeding 4m and removal of the same for
insitu reinforced concrete to and plain concrete work in.(using 12mm
shuttering ply)(a) Foundation footings, bases of columns etc. and mass
concrete.
629 (b) Columns, pillars, posts and struts (square, rectangular or polygon in 396.64 m2 1250.000 495800.000
plan).
633 Granite stone slab flooring over 20 mm (average) thick base of cement 741.96 m2 8981.000 6663542.760
mortar 1 : 6 (1 Cement: 6 Kanhaighat coarse sand:) laid and jointed with
grey cement slurry including rubbing and polishing complete with -(a)
Granite slab 20 mm slab thick (i)Jade Black 60 x 120 cm
634 Extra for nosing in marble stone for treads 1123.62 Rm 381.000 428099.220
635 15 mm cement plaster 1:3(1 cement:3 Kanhaighat coarse sand)finished 1551.58 m2 484.000 750964.720
with a floating coat of neat cement.
636 Providing and applying wall putty/plaster of paris putty of 2 mm thickness 389.28 m2 231.000 89923.680
over plaster surface to prepared the surface even and smooth complete.
637 Applying one coat of cement primer of approved quality on wall surface. 389.28 m2 46.000 17906.880
638 Finishing walls weather shield paint of approved quality on new work 389.28 m2 342.000 133133.760
( three or more coats ) to give an even shade.
639 SH-K:Construction of Planter Box 0 0.000
640 SH : EARTH WORK 0 0.000
641 Earth work in excavation in foundation trenches or drains i/c dressing of 623.98 m3 157.000 97964.860
sides and ramming of bottoms,including getting out the excavated soil
and disposal of surplus excavated soil as directed within a lead to 50 m.in
Hard dense soil. (a) Lift above 1.5 m
642 Filling available excavated earth (excluding rock) in trenches, plinth sides 207.99 m3 164.000 34110.360
of foundation etc. in layers not exceeding 20cm in depth consolidating
each deposited layer by ramming & watering lead upto 50m and lift upto
1.5m.
647 RCC work in in walls (any thickness), including attached pilasters, 181.25 m3 17656.000 3200150.000
buttresses, plinth and string ourses,fillets,columns, pillars, piers,abutment,
posts and struts etc. upto floor five level excluding the cost of centering,
shuttering ,finishing and reinforcement (a) 1:1:2 (1 cement : 1 Kanhaighat
coarse sand: : 2 graded stone aggrt. 20mm nominal size).
648 Reinforcement for R.C.C.work including bending,binding and placing in 21973.92 Kg 159.000 3493853.280
position complete
(b) TMT bars.
649 FORM WORKS 0 0.000
650 Providing form work i/c centering & shuttering so as to give a rough finish 352.60 m2 1034.000 364588.400
strutting and propping etc. height of propping and centering below
supporting floor to ceiling not exceeding 4m and removal of the same for
insitu reinforced concrete to and plain concrete work in.(using 12mm
shuttering ply)(a) Foundation footings, bases of columns etc. and mass
concrete.
651 (g) Vertical surface such as walls (any thickness), partition and the like 2416.67 m2 1256.000 3035337.520
including attached pilasters, buttresses, plinth and the string courses
and the like
652 Providing and applying wall putty/plaster of paris putty of 2 mm thickness 1505.47 m2 231.000 347763.570
over plaster surface to prepared the surface even and smooth complete.
653 Applying one coat of cement primer of approved quality on wall surface. 1505.47 m2 46.000 69251.620
654 Finishing walls weather shield paint of approved quality on new work 1505.47 m2 342.000 514870.740
( three or more coats ) to give an even shade.
655 Granite stone slab flooring over 20 mm (average) thick base of cement 14.44 m2 8981.000 129685.640
mortar 1 : 6 (1 Cement: 6 Kanhaighat coarse sand:) laid and jointed with
grey cement slurry including rubbing and polishing complete with -(a)
Granite slab 20 mm slab thick (i)Jade Black 60 x 120 cm
659 Filling available excavated earth (excluding rock) in trenches, plinth sides 473.00 m3 164.000 77572.000
of foundation etc. in layers not exceeding 20cm in depth consolidating
each deposited layer by ramming & watering lead upto 50m and lift upto
1.5m.
664 RCC work in in walls (any thickness), including attached pilasters, 88.00 m3 17656.000 1553728.000
buttresses, plinth and string ourses,fillets,columns, pillars, piers,abutment,
posts and struts etc. upto floor five level excluding the cost of centering,
shuttering ,finishing and reinforcement (a) 1:1:2 (1 cement : 1 Kanhaighat
coarse sand: : 2 graded stone aggrt. 20mm nominal size).
665 RCC work in beams, suspended floors, roofs having slope upto 15 degree 55.00 m3 17544.000 964920.000
landings, balconies,shelves,chajjas, lintels,bands,plain window
sill,staircases and spiral staircase upto floor five level but excluding the
cost of centering, shuttering ,finishing and reinforcement (a) 1:1:2 (1
cement : 1 Kanhaighat coarse sand: : 2 graded stone aggrt. 20mm
nominal size).
666 Reinforcement for R.C.C.work including bending,binding and placing in 43857.00 Kg 159.000 6973263.000
position complete
(b) TMT bars.
667 FORM WORKS 0 0.000
668 Providing form work i/c centering & shuttering so as to give a rough finish 1738.00 m2 1034.000 1797092.000
strutting and propping etc. height of propping and centering below
supporting floor to ceiling not exceeding 4m and removal of the same for
insitu reinforced concrete to and plain concrete work in.(using 12mm
shuttering ply)(a) Foundation footings, bases of columns etc. and mass
concrete.
669 (b) Columns, pillars, posts and struts (square, rectangular or polygon in 1452.00 m2 1250.000 1815000.000
plan).
670 (c) Sides & soffits of beams, beam haunchings, cantilevers, girders, 330.00 m2 1150.000 379500.000
bressummers and lintels not exceeding 1m in depth.
671 Half brick masonry 2nd class (local first class) in cement mortar 1:4 (1 1507.00 m2 1665.000 2509155.000
cement : 4 kanhaighat coarse sand) in superstructure above plinth.
672 Polygonal rubble masonry ( uncoursed / brought to courses ) squared 1221.00 m3 7827.000 9556767.000
rubble masonry (uncoursed /brought to courses ) with hard stone of
approved quality in foundation & plinth in cement mortar 1: 6 (1 cement:6
coarse sand) i/c levelling up with cement concrete 1:6:12 (1 cement:6
coarse sand:12 stone aggregate 20 mm nominal size) at plinth level.
675 15mm cement plaster 1:4 (1 cement : 4 Kanhaighat coarse sand:). 1507.00 m2 370.000 557590.000
676 Applying one coat of cement primer of approved quality on wall surface. 4796.00 m2 46.000 220616.000
677 Providing and applying wall putty/plaster of paris putty of 2 mm thickness 4796.00 m2 231.000 1107876.000
over plaster surface to prepared the surface even and smooth complete.
678 Finishing walls weather shield paint of approved quality on new work 4796.00 m2 342.000 1640232.000
( three or more coats ) to give an even shade.
679 Supplying and fixing galvanised steel barbed wire. weighing 9.38kg/100 m 8943.00 Rm 14.000 125202.000
straining and fixing to any type of standard rails straining bolts i/c securing
with and provision of galvanised mild steel wire, staples or steel pins etc
as directed (Posts and struts of wood, concrete, steel and straining bolts
shall be paid separately).
683 Filling available excavated earth (excluding rock) in trenches, plinth sides 10.62 m3 164.000 1741.680
of foundation etc. in layers not exceeding 20cm in depth consolidating
each deposited layer by ramming & watering lead upto 50m and lift upto
1.5m.
684 Providing, laying naturally occurred sand gravel Grade -III free from 61.14 m3 1385.000 84678.900
organic or other deleterious constituants including watering
ramming,consolidating in layers not exceeding 150mm (Spread
thickness)and dressing etc. complete as directed by the Engineer-in-
charge
689 RCC work in in walls (any thickness), including attached pilasters, 3.43 m3 17656.000 60560.080
buttresses, plinth and string ourses,fillets,columns, pillars, piers,abutment,
posts and struts etc. upto floor five level excluding the cost of centering,
shuttering ,finishing and reinforcement (a) 1:1:2 (1 cement : 1 Kanhaighat
coarse sand: : 2 graded stone aggrt. 20mm nominal size).
690 Reinforcement for R.C.C.work including bending,binding and placing in 2654.76 Kg 159.000 422106.840
position complete
(b) TMT bars.
691 FORM WORKS 0 0.000
692 Providing form work i/c centering & shuttering so as to give a rough finish 42.03 m2 1034.000 43459.020
strutting and propping etc. height of propping and centering below
supporting floor to ceiling not exceeding 4m and removal of the same for
insitu reinforced concrete to and plain concrete work in.(using 12mm
shuttering ply)(a) Foundation footings, bases of columns etc. and mass
concrete.
693 (b) Columns, pillars, posts and struts (square, rectangular or polygon in 43.89 m2 1250.000 54862.500
plan).
697 Steel work in built up (square & hollow section) trusses including cutting, 2643.08 kg 231.000 610551.480
hoisting, fixing in position and applying a coat of approved steel primer
red oxide chrom primer conforming to IS 2079, welded and bolted
incluiding special shape washer etc. complete.
698 Providing & fixing of Metal Shingles panel for roofing characterised with 30.83 m2 3710.000 114379.300
ASTM class A fire rating,with wind resistance in corporating with IECC
solar reflectance index with minimum vapor permeance of 15 under high
temperature along with compatible metal fasteners
699 Providing & fixing 19 mm thick cement fibre board for cushion of roofing 30.83 m2 2328.000 71772.240
as per approved design
700 Trapzoidal Pre-painted Profile Sheet for Ridges, Gutter or valley 610 mm 11.51 Rm 333.000 3832.830
wide of approved brand DYNA Roof or equivalent fixed with selt drilling
screws of 68 mm long Xylon coated screw with PVC washer & cap
complete excluding the coat of purlins rafter & trusses.a) Pre painted
alvalume sheet(PPGL) i) Sheet 0.50mm/4.2 kgs/sqm
701 Providing and fixing steel gate by using 50x50x3 mm sqm bar as as main 18.67 m2 8059.000 150461.530
bars horizontally and 25x25mm solid square bar vertically and 25x 8 mm
as decorative bar readily available at market i/c priming , painting etc
completed as per direction of Engineer -in-charge.
705 Filling available excavated earth (excluding rock) in trenches, plinth sides 56.56 m3 164.000 9275.840
of foundation etc. in layers not exceeding 20cm in depth consolidating
each deposited layer by ramming & watering lead upto 50m and lift upto
1.5m.
708 (c) 1:3:6 (1 cem :3 Kanhaighat coarse sand: 6 graded stone aggrt. 40mm 142.20 m3 10113.000 1438068.600
nominal size).
711 Reinforcement for R.C.C.work including bending,binding and placing in 2948.04 Kg 159.000 468738.360
position complete
(b) TMT bars.
712 FORM WORKS 0 0.000
713 Providing form work i/c centering & shuttering so as to give a rough finish 97.28 m2 1034.000 100587.520
strutting and propping etc. height of propping and centering below
supporting floor to ceiling not exceeding 4m and removal of the same for
insitu reinforced concrete to and plain concrete work in.(using 12mm
shuttering ply)(a) Foundation footings, bases of columns etc. and mass
concrete.
714 (c) Sides & soffits of beams, beam haunchings, cantilevers, girders, 62.04 m2 1150.000 71346.000
bressummers and lintels not exceeding 1m in depth.
715 (g) Vertical surface such as walls (any thickness), partition and the like 160.28 m2 1256.000 201311.680
including attached pilasters, buttresses, plinth and the string courses
and the like
716 ( d)Flat surface such as suspended floor,roofs,landing & the like ( i) floor 46.32 m2 1257.000 58224.240
etc upto 200mm in thickness
717 (e)Edges of slab and breaks in floors and walls (i) Under 20cm wide 22.00 Rm 295.000 6490.000
721 Filling available excavated earth (excluding rock) in trenches, plinth sides 752.42 m3 164.000 123396.880
of foundation etc. in layers not exceeding 20cm in depth consolidating
each deposited layer by ramming & watering lead upto 50m and lift upto
1.5m.
727 RCC work in in walls (any thickness), including attached pilasters, 2287.68 m3 17656.000 40391278.080
buttresses, plinth and string ourses,fillets,columns, pillars, piers,abutment,
posts and struts etc. upto floor five level excluding the cost of centering,
shuttering ,finishing and reinforcement (a) 1:1:2 (1 cement : 1 Kanhaighat
coarse sand: : 2 graded stone aggrt. 20mm nominal size).
728 Reinforcement for R.C.C.work including bending,binding and placing in 140535.55 Kg 159.000 22345152.450
position complete
(b) TMT bars.
729 FORM WORKS 0 0.000
730 Providing form work i/c centering & shuttering so as to give a rough finish 1396.33 m2 1034.000 1443805.220
strutting and propping etc. height of propping and centering below
supporting floor to ceiling not exceeding 4m and removal of the same for
insitu reinforced concrete to and plain concrete work in.(using 12mm
shuttering ply)(a) Foundation footings, bases of columns etc. and mass
concrete.
731 (b) Columns, pillars, posts and struts (square, rectangular or polygon in 247.35 m2 1250.000 309187.500
plan).
732 (g) Vertical surface such as walls (any thickness), partition and the like 6714.62 m2 1256.000 8433562.720
including attached pilasters, buttresses, plinth and the string courses
and the like
733 Providing weep holes in plain Concrete/ Reinforced Concrete abutment, 1029.41 Rm 1024.000 1054115.840
wing wall/return wall complete as per drawing and technical specification
734 Providing and fixing stailess steel (Grade 304) railing made of hollow 3509.31 Rm 708.000 2484591.480
tubes, channels, plates & fitting the same with necessary stainless steel
nuts and bolts complete, i/c fixing the railing with necessary accessories
and stainless steel dash fashner, stainless steel bolts etc. of required
size, on the top of the floor to the side of waist slab with suitable
arrangement approval of Engineer-in-charge, (for payment purpose only
weight of stainless steel member shall be consider excluding fixing
accessories such as nuts, bolts, fastners etc.
735 Providing and applying plaster of paris putty of 2mm thickness over 194.64 m2 231.000 44961.840
plastered surface to prepare the surface even and smooth complete.
736 Applying one coat of cement primer of approved quality on wall surface. 194.64 m2 46.000 8953.440
737 Finishing wall weather shield paint of approved quality on new work (three 194.64 m2 342.000 66566.880
or more coats) to give an even shade.
738 SH-P:Construction of RCC Water Tank 0 0.000
739 SH : EARTH WORK 0 0.000
740 Earth work in excavation in foundation trenches or drains i/c dressing of 40.13 m3 157.000 6300.410
sides and ramming of bottoms,including getting out the excavated soil
and disposal of surplus excavated soil as directed within a lead to 50 m.in
Hard dense soil. (a) Lift above 1.5 m
741 Filling available excavated earth (excluding rock) in trenches, plinth sides 12.04 m3 164.000 1974.560
of foundation etc. in layers not exceeding 20cm in depth consolidating
each deposited layer by ramming & watering lead upto 50m and lift upto
1.5m.
742 Providing, laying naturally occurred sand gravel Grade -III free from 12.30 m3 1385.000 17035.500
organic or other deleterious constituants including watering
ramming,consolidating in layers not exceeding 150mm (Spread
thickness)and dressing etc. complete as directed by the Engineer-in-
charge
743 SH : CONCRETE WORKS 0 0.000
744 P/L cement concrete in foundation and plinth excluding the cost of 3.01 m3 10564.000 31797.640
centering and shuttering : - (a) 1:4:8 (1 cem :4 Kanhaighat coarse sand::
8 graded stone aggrt. 40mm nominal size).
747 RCC work in in walls (any thickness), including attached pilasters, 11.70 m3 17656.000 206575.200
buttresses, plinth and string ourses,fillets,columns, pillars, piers,abutment,
posts and struts etc. upto floor five level excluding the cost of centering,
shuttering ,finishing and reinforcement (a) 1:1:2 (1 cement : 1 Kanhaighat
coarse sand: : 2 graded stone aggrt. 20mm nominal size).
748 Reinforcement for R.C.C.work including bending,binding and placing in 4185.09 Kg 159.000 665429.310
position complete
(b) TMT bars.
749 FORM WORKS 0 0.000
750 Providing form work i/c centering & shuttering so as to give a rough finish 49.10 m2 1034.000 50769.400
strutting and propping etc. height of propping and centering below
supporting floor to ceiling not exceeding 4m and removal of the same for
insitu reinforced concrete to and plain concrete work in.(using 12mm
shuttering ply)(a) Foundation footings, bases of columns etc. and mass
concrete.
751 (b) Columns, pillars, posts and struts (square, rectangular or polygon in 43.40 m2 1250.000 54250.000
plan).
752 ( d)Flat surface such as suspended floor,roofs,landing & the like ( i) floor 25.00 m2 1257.000 31425.000
etc upto 200mm in thickness
753 (e)Edges of slab and breaks in floors and walls (i) Under 20cm wide 58.60 Rm 295.000 17287.000
754 15 mm cement plaster 1:3(1 cement:3 Kanhaighat coarse sand)finished 39.71 m2 484.000 19219.640
with a floating coat of neat cement.
755 P/F C.I cover with frame for (manhole and chamber) (a) 600x450mm 2.00 Each 3760.000 7520.000
(Heavy duty)
756 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having 70.00 Rm 338.000 23660.000
thermal stability for hot & cold water supply including all CPVC plain &
brass threaded fittings This includes jointing of pipes & fittings with one
step CPVC solvent cement, trenching, refilling & testing of joints complete
as per direction of Engineer in Charge.External work 25 mm nominal
outer dia Pipes
761 Filling available excavated earth (excluding rock) in trenches, plinth sides 181.13 m3 164.000 29705.320
of foundation etc. in layers not exceeding 20cm in depth consolidating
each deposited layer by ramming & watering lead upto 50m and lift upto
1.5m.
764 (b) 1:2:4 (1 cem :2 Kanhaighat coarse sand::4 graded stone aggrt.20mm 29.95 m3 13976.000 418581.200
n/size).
767 15 mm cement plaster 1:3(1 cement:3 Kanhaighat coarse sand)finished 1964.20 m2 484.000 950672.800
with a floating coat of neat cement.
771 Filling available excavated earth (excluding rock) in trenches, plinth sides 203.02 m3 164.000 33295.280
of foundation etc. in layers not exceeding 20cm in depth consolidating
each deposited layer by ramming & watering lead upto 50m and lift upto
1.5m.
776 Reinforcement for R.C.C.work including bending,binding and placing in 10364.72 Kg 159.000 1647990.480
position complete
(b) TMT bars.
777 FORM WORKS 0 0.000
778 Providing form work i/c centering & shuttering so as to give a rough finish 1894.83 m2 1034.000 1959254.220
strutting and propping etc. height of propping and centering below
supporting floor to ceiling not exceeding 4m and removal of the same for
insitu reinforced concrete to and plain concrete work in.(using 12mm
shuttering ply)(a) Foundation footings, bases of columns etc. and mass
concrete.
779 15 mm cement plaster 1:3(1 cement:3 Kanhaighat coarse sand)finished 1353.45 m2 484.000 655069.800
with a floating coat of neat cement.
780 Steel Work welded in built up sections framed work,i/c 289.37 Qtl 12137.000 3512083.690
cutting,hoisting,fixing in position & In gratings,framed guard bars,
ladders,railings,brackets and similar works applying a priming coat of red
lead paints. (h) In gratings, framed guard bars, ladder, railling, brackets
and similar works
783 Providing and laying & compacting granular base/sub-base according to 1991.48 m3 1762.000 3508987.760
lines, grades & cross-sections by using naturally occuring sand
gravel/conforming to IRC Grade - 2 of M.O.S.T. specification free from
organic or other deleterious constituent compact by rolling with power
roller of 8 to 10 tonnes capacity in layers not exceeding 150 mm (spread
thickness) including rolling of the road surface to proper level & grade 30
cm width edging on both sides etc. complete as directed by the Engineer-
in-charge
784 Providing, laying, spreading and compacting graded stone aggregate to 880.24 m3 6387.000 5622092.880
wet mix macadam specifications including premixing the material with
water at OMC in mechanical mix (Pug Mill), carraige of mixed material by
tipper to sie laying in uniform layers in sub- base / base course on well
prepared underbase and compacting with power vibratory- roller to
achievethe desired density including lighting,guarding,barrricating and
maintenance of diversion etc.
785 Preparing surface by brushing with wire brushes for remaining caked mud 5716.73 m2 30.000 171501.900
etc. sweeping with brooms and finally fanning the cleared surface with
gunny bags to removed all loose dirt etc.
786 Providing & applying evenly a priming/tack coat with bitumen (80/100). 5716.73 m2 66.000 377304.180
(a) 10 kg/10sqm
787 Providing and laying bituminous macadam of 50 mm as per clause 504.1 5716.73 m2 874.000 4996422.020
of "MOST" specification for base course with binder content @ 4% by
weight of total mix including preparation of bases including filling of pot
holes, cleaning the surface with wire brushes etc. and providing suitable
edge supports heating of binder and aggregate handling of materials,
screening, mixing, in hot mix plant conforming and transporting laying and
finishing with paver finisher to the required level, grade and camber,
rolling by power roller etc. complete including running expenses of all
plants.
788 2 cm consolidated thick single coat pre-mix carpet surfacing with 0.27 5716.73 m2 535.000 3058450.550
cum stone chipping 12.0 mm size 0.19 cum and 10 mm size 0.09 cum
mix with 14.6 kg of binder per 10.00 sqm of road surface and rolling
complete including a seal coat IRC type "B" with 0.06 cum of fine
aggregate and 6.8 kg of bitumen 80/100 per 10.00 sqm of road surface
using H.M. plant & paver finisher
794 (b) 1:2:4 (1 cem :2 Kanhaighat coarse sand::4 graded stone aggrt.20mm 46.15 m3 13976.000 644992.400
n/size).
795 SH : R.C.C. WORKS 0 0.000
796 Providing and laying in position specified grade of reinforced cement 75.68 m3 16544.000 1252049.920
concrete, excluding the cost of centering, shuttering, finishing and
reinforcement - All work up to plinth level : (a)1:1:2 (1 cement :1
Kanhaighat coarse sand:2 graded stone aggregate 20 mm nominal size.)
797 RCC work in in walls (any thickness), including attached pilasters, 0.29 m3 17656.000 5120.240
buttresses, plinth and string ourses,fillets,columns, pillars, piers,abutment,
posts and struts etc. upto floor five level excluding the cost of centering,
shuttering ,finishing and reinforcement (a) 1:1:2 (1 cement : 1 Kanhaighat
coarse sand: : 2 graded stone aggrt. 20mm nominal size).
798 RCC work in beams, suspended floors, roofs having slope upto 15 degree 1.03 m3 17544.000 18070.320
landings, balconies,shelves,chajjas, lintels,bands,plain window
sill,staircases and spiral staircase upto floor five level but excluding the
cost of centering, shuttering ,finishing and reinforcement (a) 1:1:2 (1
cement : 1 Kanhaighat coarse sand: : 2 graded stone aggrt. 20mm
nominal size).
799 Reinforcement for R.C.C.work including bending,binding and placing in 2792.23 Kg 159.000 443964.570
position complete
(b) TMT bars.
800 FORM WORKS 0 0.000
801 Providing form work i/c centering & shuttering so as to give a rough 0 0.000
finish strutting and propping etc. height of propping and centering
below supporting floor to ceiling not exceeding 4m and removal of
the same for insitu reinforced concrete to and plain concrete work
in.(using 12mm shuttering ply)
802 (b) Columns, pillars, posts and struts (square, rectangular or polygon in 6.71 m2 1250.000 8387.500
plan).
803 (c) Sides & soffits of beams, beam haunchings, cantilevers, girders, 31.63 m2 1150.000 36374.500
bressummers and lintels not exceeding 1m in depth.
804 BRICKS WORKS 0 0.000
805 2nd class (local first class) brick work in foundation and plinth in cement 4.21 m3 16987.000 71515.270
mortar 1: 4 (1 Cem:4 kanhaighat C/Sand)
806 SH : FINISHING 0 0.000
807 12mm cement plaster 1:4 (1 cement : 4 Kanhaighat coarse sand:). 16.82 m2 327.000 5500.140
808 15mm cement plaster 1:4 (1 cement : 4 Kanhaighat coarse sand:). 16.82 m2 370.000 6223.400
809 15 mm cement plaster 1:3(1 cement:3 Kanhaighat coarse sand)finished 16.54 m2 484.000 8005.360
with a floating coat of neat cement.
810 Applying one coat of cement primer of approved quality on wall surface. 40.55 m2 46.000 1865.300
811 Providing and applying wall putty/plaster of paris putty of 2 mm thickness 40.55 m2 231.000 9367.050
over plaster surface to prepared the surface even and smooth complete.
812 Finishing walls weather shield paint of approved quality on new work 40.55 m2 342.000 13868.100
( three or more coats ) to give an even shade.
813 Providing and laying & compacting granular base/sub-base according to 92.31 m3 1762.000 162650.220
lines, grades & cross-sections by using naturally occuring sand
gravel/conforming to IRC Grade - 2 of M.O.S.T. specification free from
organic or other deleterious constituent compact by rolling with power
roller of 8 to 10 tonnes capacity in layers not exceeding 150 mm (spread
thickness) including rolling of the road surface to proper level & grade 30
cm width edging on both sides etc. complete as directed by the Engineer-
in-charge
814 Providing and laying 80 mm thick factory made cement concrete 307.70 m2 1378.000 424010.600
interlocking paver block (Rubber Moulded ) of M-30 grade made by
block making machine with strong vibratory compaction and of approved
size and design/shape laid in required colour and pattern over 10 cm thick
C.C. 1:4:8 ( 1 cement :2 Kanhaighat coarse sand :4 graded stone aggrt.
40mm nominal size)and filling the joints with cement mortar 1:3 (1
cement : 3 kanhaighat coarse sand) all complete as per the direction of
the engineer-in -charge.
820 (b) 1:2:4 (1 cem :2 Kanhaighat coarse sand::4 graded stone aggrt.20mm 192.90 m3 13976.000 2695970.400
n/size).
821 Providing and laying & compacting granular base/sub-base according to 578.70 m3 1762.000 1019669.400
lines, grades & cross-sections by using naturally occuring sand
gravel/conforming to IRC Grade - 2 of M.O.S.T. specification free from
organic or other deleterious constituent compact by rolling with power
roller of 8 to 10 tonnes capacity in layers not exceeding 150 mm (spread
thickness) including rolling of the road surface to proper level & grade 30
cm width edging on both sides etc. complete as directed by the Engineer-
in-charge
822 Providing and laying 80 mm thick factory made cement concrete 2129.79 m2 1378.000 2934850.620
interlocking paver block (Rubber Moulded ) of M-30 grade made by
block making machine with strong vibratory compaction and of approved
size and design/shape laid in required colour and pattern over 10 cm thick
C.C. 1:4:8 ( 1 cement :2 Kanhaighat coarse sand :4 graded stone aggrt.
40mm nominal size)and filling the joints with cement mortar 1:3 (1
cement : 3 kanhaighat coarse sand) all complete as per the direction of
the engineer-in -charge.
829 (b) 1:2:4 (1 cem :2 Kanhaighat coarse sand::4 graded stone aggrt.20mm 0.43 m3 13976.000 6009.680
n/size).
832 RCC work in in walls (any thickness), including attached pilasters, 0.93 m3 17656.000 16420.080
buttresses, plinth and string ourses,fillets,columns, pillars, piers,abutment,
posts and struts etc. upto floor five level excluding the cost of centering,
shuttering ,finishing and reinforcement (a) 1:1:2 (1 cement : 1 Kanhaighat
coarse sand: : 2 graded stone aggrt. 20mm nominal size).
833 RCC work in beams, suspended floors, roofs having slope upto 15 degree 2.08 m3 17544.000 36491.520
landings, balconies,shelves,chajjas, lintels,bands,plain window
sill,staircases and spiral staircase upto floor five level but excluding the
cost of centering, shuttering ,finishing and reinforcement (a) 1:1:2 (1
cement : 1 Kanhaighat coarse sand: : 2 graded stone aggrt. 20mm
nominal size).
834 Reinforcement for R.C.C.work including bending,binding and placing in 742.09 Kg 159.000 117992.310
position complete
(b) TMT bars.
835 FORM WORKS 0 0.000
836 Providing form work i/c centering & shuttering so as to give a rough finish 10.60 m2 1034.000 10960.400
strutting and propping etc. height of propping and centering below
supporting floor to ceiling not exceeding 4m and removal of the same for
insitu reinforced concrete to and plain concrete work in.(using 12mm
shuttering ply)(a) Foundation footings, bases of columns etc. and mass
concrete.
837 (b) Columns, pillars, posts and struts (square, rectangular or polygon in 13.47 m2 1250.000 16837.500
plan).
838 (c) Sides & soffits of beams, beam haunchings, cantilevers, girders, 5.85 m2 1150.000 6727.500
bressummers and lintels not exceeding 1m in depth.
839 ( d)Flat surface such as suspended floor,roofs,landing & the like ( i) floor 10.31 m2 1257.000 12959.670
etc upto 200mm in thickness
840 (e)Edges of slab and breaks in floors and walls (i) Under 20cm wide 7.94 Rm 295.000 2342.300
844 Providing wood work in frames of doors, windows, clerestory windows 0.07 m3 137701.000 9639.070
and other frames wrought framed and fixed in position (b) Local best
quality Teak Wood
845 Providing and fixing 38mm thick panelled and glazed or panelled and 1.60 m2 5136.000 8217.600
glazed shutters for doors, windows, c/windows ect. Including bright
finished brass hinges with necessary screws-(a) Local best quality teak
wood.
846 Providing 40x3mm flat iron hold fast 40cm long i/c fixing to frames with 6.00 Each 270.000 1620.000
10mm dia bolts, nuts and wooden plugs and embedding to cement
concrete block 30x10x15cm 1:3:6 (1 cement : 3 coarsesand : 6 stone
aggrt. 20mm nominal guage).
847 Providing & fixing bright finished brass 100 mm door mortice latch with 1.00 Each 1591.000 1591.000
one dead bolt & a pair of levers handles with necessary screws etc.
complete (Indian make of approved quality).
848 Providing and fixing Brass sliding bolts bright finished or black enamelled 1.00 Each 1404.000 1404.000
with nuts & screws etc. complete.(a) 300X16 mm
849 Providing & fixing Brass Tower bolts (barrel type) with screws etc. 2.00 Each 310.000 620.000
complete (b) 100x10 mm
850 Providing & fixing Brass handles with necessary screws etc. complete. 2.00 Each 183.000 366.000
(a)125mm
851 Providing and fixing aluminium works for doors windows ventilators and 1.56 m2 425.000 663.000
partions worth extruded builts up standard tubular section /appropriate Z
sections and other section of approved make conforming to IS 733 and IS
1285 fixed with expansion hold fasteners including necessary filling up
gap at junction at top bottom and side with required EPDM
rubber/Neoprene gasket etc Aluminium snap beading for glazing
/panelling C P brass/stainless steel screws all complete as per archectural
drawing and the direction of engineer in charge(glazing and panelling to
be paid for separately 10.66.1 Anodised aluminium ( anodised
transparent or dyed to required shade according to IS:1868, Minimum
anodic coating of grade AC 15 )
852 Providing and fixing glazing in aluminium door , windows , ventilator 1.56 m2 881.000 1374.360
shutter and partition etc with EPDM rudder / neoprene gasket etc
complete as per the architectural drawing and the directions of engineer
in charge ( Cost of aluminium snap beading shall be paid in basic item ):
With plain glass panes of 4 mm thickness
853 Providing and laying vitrified tiles in different sizes (thickness 8 mm thick) 3.05 m2 5131.000 15649.550
with water absorption less than 0.08% and conforming to IS 15622,of
approved make ,in all colours & shades laid on 20mm thick cement
mortar 1:4 (1 cem : 4 c/sand),i/c routing the joints with white cement &
matching pigments etc,complete
(i)size of tile-600x600mm (Double charged)branded
854 Providing and laying vitrified tiles in different sizes (thickness 8 mm thick) 1.57 m2 5202.000 8167.140
with water absorption less than 0.08% and conforming to IS 15622,of
approved brand and manufacturer ,in all colours & shades,in
skirting ,riser of steps laid with cement based high polymer modified
quick set tile adhesive.(i)size of tile-600x600mm (Double
charged)branded
855 Granite stone slab flooring over 20 mm (average) thick base of cement 1.66 m2 8981.000 14908.460
mortar 1 : 6 (1 Cement: 6 Kanhaighat coarse sand:) laid and jointed with
grey cement slurry including rubbing and polishing complete with -(a)
Granite slab 20 mm slab thick (i)Jade Black 60 x 120 cm
856 Providing and laying pressed clay tiles (as per approved pattern 20 mm 9.27 m2 687.000 6368.490
nominal thickness of approved size) on roofs jointed with cement mortar
1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing
compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement :
4 coarse sand) and finished neat complete.
859 15mm cement plaster 1:4 (1 cement : 4 Kanhaighat coarse sand:). 5.72 m2 370.000 2116.400
860 Applying one coat of cement primer of approved quality on wall surface. 34.20 m2 46.000 1573.200
861 Providing and applying wall putty/plaster of paris putty of 2 mm thickness 34.20 m2 231.000 7900.200
over plaster surface to prepared the surface even and smooth complete.
862 Finishing walls weather shield paint of approved quality on new work 34.20 m2 342.000 11696.400
( three or more coats ) to give an even shade.
863 Varnishing (two or more coats) with superior Copal varnish of approved 4.10 m2 128.000 524.800
quality i/c sizing on new work.
864 Providing under layer for plinth protection of 75 mm thick (unconsolidated) 6.37 m2 392.000 2497.040
of stone aggrt. 40 mm nominal size wall rammed & consolidated &
grouted with fine sand i/c finishing the top of concrete smooth.
865 Providing plinth protection 50 mm thick in cement concrete 1: 3 : 6 (1 6.37 m2 527.000 3356.990
cement : 3 Kanhaighat sand : 6 graded stone aggrt. of 20 mm nominal
size) i/c finishing the top surface of concrete smooth.
866 2nd class brick masonary 15x15cm open surface drain in c.m. 1: 5(1cem : 12.12 Rm 718.000 8702.160
5 Kanhaighat sand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem : 5
Kanhaighat sand :10gr.st.aggrt.40mm n/size i/c 12mm thick cement
plaster 1: 3 (1cem : 3 Kanhaighat sand) with a floating coat of neat
cement inside & outside as per standard design.
882 SITC surface mounted LED Down Lighter with white powder coated Al. 1.00 each 2729.000 2729.000
housing with integrated electronic driver 15 W 840 LHEAAGP6IA2W012
complete with connection as rqd. (Havell's)
883 S/F 300 mm dia wall mounting fan complete with all accessories as reqd. 1.00 each 3003.000 3003.000
884 SITC 50W LED 5000K energy saving IP 65 Flood Light luminaries with 1.00 each 5760.000 5760.000
high power LED as light source Havell's JETACOMPECTOFL50W LED
757LTG complete with connection as rqd. (Havell's)
885 S/F (following way) single/double pole and nuetral, sheet steel MCCB 1.00 each 795.000 795.000
distributuion board, 240V on surface/recessed complete with tinned
copper bus bar neutral bus bar, earth bar,din bar detachable gland plate,
interconnection, phosphatized and powder painted i/c earthing etc as reqd
(but without MCB/RCCB/Isolator) (a) 4 way single door
886 S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and 0 0.000
other load of (following poles) in the existing MCB DB complete with
connection testing and commissioning etc.as reqd. (a) Single pole
887 (a)10 amp MCB "C" Curve 1.00 each 472.000 472.000
888 (a)20 amp MCB "C" Curve 1.00 each 481.000 481.000
889 Supplying & fixing (following rating) double pole 240V isolator in existing 1.00 each 852.000 852.000
MCB DB complete with connection testing & commissioning as reqd. (a)
40 amp
890 P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm 1.00 each 1072.000 1072.000
in size wooden board complete with locking arrangement and painting etc.
891 Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories 1.00 set 4557.000 4557.000
and providing masonary enclosure with cover plate having locking
arrangement and watering pipe etc.as reqd.
892 Extra for using salt and charcoal for pipe electrode as reqd. 1.00 set 1810.000 1810.000
893 P/F 4.06mm dia.copper wire on surface or in recess for loop earthing 20.00 mt 135.000 2700.000
etc.as reqd.
894 Supplying & installation of ABC type 4kg capacity fire extinguisher 1.00 each 4212.000 4212.000
(Repidex) etc as reqd. (ISI marked).
895 Supplying & installation of carbon dioxide type fire extinguisher suitable 1.00 each 9025.000 9025.000
for fires involving materials like oil, electric & delicate machineries)
capacity: 4.5 kg (ISI marked)(Repidex).
896 SH-V:Construction of Security Booth 0 0.000
897 SH : EARTH WORK 0 0.000
898 Earth work in excavation in foundation trenches or drains i/c dressing of 14.62 m3 157.000 2295.340
sides and ramming of bottoms,including getting out the excavated soil
and disposal of surplus excavated soil as directed within a lead to 50 m.in
Hard dense soil. (a) Lift above 1.5 m
899 Filling available excavated earth (excluding rock) in trenches, plinth sides 4.87 m3 164.000 798.680
of foundation etc. in layers not exceeding 20cm in depth consolidating
each deposited layer by ramming & watering lead upto 50m and lift upto
1.5m.
902 (b) 1:2:4 (1 cem :2 Kanhaighat coarse sand::4 graded stone aggrt.20mm 0.43 m3 13976.000 6009.680
n/size).
905 RCC work in in walls (any thickness), including attached pilasters, 0.93 m3 17656.000 16420.080
buttresses, plinth and string ourses,fillets,columns, pillars, piers,abutment,
posts and struts etc. upto floor five level excluding the cost of centering,
shuttering ,finishing and reinforcement (a) 1:1:2 (1 cement : 1 Kanhaighat
coarse sand: : 2 graded stone aggrt. 20mm nominal size).
906 RCC work in beams, suspended floors, roofs having slope upto 15 degree 1.98 m3 17544.000 34737.120
landings, balconies,shelves,chajjas, lintels,bands,plain window
sill,staircases and spiral staircase upto floor five level but excluding the
cost of centering, shuttering ,finishing and reinforcement (a) 1:1:2 (1
cement : 1 Kanhaighat coarse sand: : 2 graded stone aggrt. 20mm
nominal size).
907 Reinforcement for R.C.C.work including bending,binding and placing in 717.81 Kg 159.000 114131.790
position complete
(b) TMT bars.
908 FORM WORKS 0 0.000
909 Providing form work i/c centering & shuttering so as to give a rough finish 10.60 m2 1034.000 10960.400
strutting and propping etc. height of propping and centering below
supporting floor to ceiling not exceeding 4m and removal of the same for
insitu reinforced concrete to and plain concrete work in.(using 12mm
shuttering ply)(a) Foundation footings, bases of columns etc. and mass
concrete.
910 (b) Columns, pillars, posts and struts (square, rectangular or polygon in 13.47 m2 1250.000 16837.500
plan).
911 (c) Sides & soffits of beams, beam haunchings, cantilevers, girders, 5.48 m2 1150.000 6302.000
bressummers and lintels not exceeding 1m in depth.
912 ( d)Flat surface such as suspended floor,roofs,landing & the like ( i) floor 9.85 m2 1257.000 12381.450
etc upto 200mm in thickness
913 (e)Edges of slab and breaks in floors and walls (i) Under 20cm wide 4.63 Rm 295.000 1365.850
917 Providing wood work in frames of doors, windows, clerestory windows 0.07 m3 137701.000 9639.070
and other frames wrought framed and fixed in position (b) Local best
quality Teak Wood
918 Providing and fixing 38mm thick panelled and glazed or panelled and 1.60 m2 5136.000 8217.600
glazed shutters for doors, windows, c/windows ect. Including bright
finished brass hinges with necessary screws-(a) Local best quality teak
wood.
919 Providing 40x3mm flat iron hold fast 40cm long i/c fixing to frames with 6.00 Each 270.000 1620.000
10mm dia bolts, nuts and wooden plugs and embedding to cement
concrete block 30x10x15cm 1:3:6 (1 cement : 3 coarsesand : 6 stone
aggrt. 20mm nominal guage).
920 Providing & fixing bright finished brass 100 mm door mortice latch with 1.00 Each 1591.000 1591.000
one dead bolt & a pair of levers handles with necessary screws etc.
complete (Indian make of approved quality).
921 Providing and fixing Brass sliding bolts bright finished or black enamelled 1.00 Each 1404.000 1404.000
with nuts & screws etc. complete.(a) 300X16 mm
922 Providing & fixing Brass Tower bolts (barrel type) with screws etc. 2.00 Each 310.000 620.000
complete (b) 100x10 mm
923 Providing & fixing Brass handles with necessary screws etc. complete. 2.00 Each 183.000 366.000
(a)125mm
924 Providing and fixing aluminium works for doors windows ventilators and 1.56 m2 425.000 663.000
partions worth extruded builts up standard tubular section /appropriate Z
sections and other section of approved make conforming to IS 733 and IS
1285 fixed with expansion hold fasteners including necessary filling up
gap at junction at top bottom and side with required EPDM
rubber/Neoprene gasket etc Aluminium snap beading for glazing
/panelling C P brass/stainless steel screws all complete as per archectural
drawing and the direction of engineer in charge(glazing and panelling to
be paid for separately 10.66.1 Anodised aluminium ( anodised
transparent or dyed to required shade according to IS:1868, Minimum
anodic coating of grade AC 15 )
925 Providing and fixing glazing in aluminium door , windows , ventilator 1.56 m2 881.000 1374.360
shutter and partition etc with EPDM rudder / neoprene gasket etc
complete as per the architectural drawing and the directions of engineer
in charge ( Cost of aluminium snap beading shall be paid in basic item ):
With plain glass panes of 4 mm thickness
926 Providing and laying vitrified tiles in different sizes (thickness 8 mm thick) 3.05 m2 5131.000 15649.550
with water absorption less than 0.08% and conforming to IS 15622,of
approved make ,in all colours & shades laid on 20mm thick cement
mortar 1:4 (1 cem : 4 c/sand),i/c routing the joints with white cement &
matching pigments etc,complete
(i)size of tile-600x600mm (Double charged)branded
927 Providing and laying vitrified tiles in different sizes (thickness 8 mm thick) 1.57 m2 5202.000 8167.140
with water absorption less than 0.08% and conforming to IS 15622,of
approved brand and manufacturer ,in all colours & shades,in
skirting ,riser of steps laid with cement based high polymer modified
quick set tile adhesive.(i)size of tile-600x600mm (Double
charged)branded
928 Granite stone slab flooring over 20 mm (average) thick base of cement 0.76 m2 8981.000 6825.560
mortar 1 : 6 (1 Cement: 6 Kanhaighat coarse sand:) laid and jointed with
grey cement slurry including rubbing and polishing complete with -(a)
Granite slab 20 mm slab thick (i)Jade Black 60 x 120 cm
929 Providing and laying pressed clay tiles (as per approved pattern 20 mm 9.27 m2 687.000 6368.490
nominal thickness of approved size) on roofs jointed with cement mortar
1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing
compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement :
4 coarse sand) and finished neat complete.
932 15mm cement plaster 1:4 (1 cement : 4 Kanhaighat coarse sand:). 5.72 m2 370.000 2116.400
933 Applying one coat of cement primer of approved quality on wall surface. 34.20 m2 46.000 1573.200
934 Providing and applying wall putty/plaster of paris putty of 2 mm thickness 34.20 m2 231.000 7900.200
over plaster surface to prepared the surface even and smooth complete.
935 Finishing walls weather shield paint of approved quality on new work 34.20 m2 342.000 11696.400
( three or more coats ) to give an even shade.
936 Varnishing (two or more coats) with superior Copal varnish of approved 4.10 m2 128.000 524.800
quality i/c sizing on new work.
937 Providing under layer for plinth protection of 75 mm thick (unconsolidated) 6.37 m2 392.000 2497.040
of stone aggrt. 40 mm nominal size wall rammed & consolidated &
grouted with fine sand i/c finishing the top of concrete smooth.
938 Providing plinth protection 50 mm thick in cement concrete 1: 3 : 6 (1 6.37 m2 527.000 3356.990
cement : 3 Kanhaighat sand : 6 graded stone aggrt. of 20 mm nominal
size) i/c finishing the top surface of concrete smooth.
939 2nd class brick masonary 15x15cm open surface drain in c.m. 1: 5(1cem : 12.12 Rm 718.000 8702.160
5 Kanhaighat sand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem : 5
Kanhaighat sand :10gr.st.aggrt.40mm n/size i/c 12mm thick cement
plaster 1: 3 (1cem : 3 Kanhaighat sand) with a floating coat of neat
cement inside & outside as per standard design.
955 SITC surface mounted LED Down Lighter with white powder coated Al. 1.00 each 2729.000 2729.000
housing with integrated electronic driver 15 W 840 LHEAAGP6IA2W012
complete with connection as rqd. (Havell's)
956 S/F 300 mm dia wall mounting fan complete with all accessories as reqd. 1.00 each 3003.000 3003.000
957 SITC 50W LED 5000K energy saving IP 65 Flood Light luminaries with 1.00 each 5760.000 5760.000
high power LED as light source Havell's JETACOMPECTOFL50W LED
757LTG complete with connection as rqd. (Havell's)
958 S/F (following way) single/double pole and nuetral, sheet steel MCCB 1.00 each 795.000 795.000
distributuion board, 240V on surface/recessed complete with tinned
copper bus bar neutral bus bar, earth bar,din bar detachable gland plate,
interconnection, phosphatized and powder painted i/c earthing etc as reqd
(but without MCB/RCCB/Isolator) (a) 4 way single door
959 S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and 0 0.000
other load of (following poles) in the existing MCB DB complete with
connection testing and commissioning etc.as reqd. (a) Single pole
960 (a)10 amp MCB "C" Curve 1.00 each 472.000 472.000
961 (a)20 amp MCB "C" Curve 1.00 each 481.000 481.000
962 Supplying & fixing (following rating) double pole 240V isolator in existing 1.00 each 852.000 852.000
MCB DB complete with connection testing & commissioning as reqd. (a)
40 amp
963 P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm 1.00 each 1072.000 1072.000
in size wooden board complete with locking arrangement and painting etc.
964 Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories 1.00 set 4557.000 4557.000
and providing masonary enclosure with cover plate having locking
arrangement and watering pipe etc.as reqd.
965 Extra for using salt and charcoal for pipe electrode as reqd. 1.00 set 1810.000 1810.000
966 P/F 4.06mm dia.copper wire on surface or in recess for loop earthing 20.00 mt 135.000 2700.000
etc.as reqd.
967 Supplying & installation of ABC type 4kg capacity fire extinguisher 1.00 each 4212.000 4212.000
(Repidex) etc as reqd. (ISI marked).
968 Supplying & installation of carbon dioxide type fire extinguisher suitable 1.00 each 9025.000 9025.000
for fires involving materials like oil, electric & delicate machineries)
capacity: 4.5 kg (ISI marked)(Repidex).
969 SH-W:Construction of Display Gazebo 0 0.000
970 Earth work 0 0.000
971 Earthwork in excavation foundation trenches or drains including dressing 374.50 Cum 157.000 58796.500
of sides and ramming of bottoms and including getting out the excavated
soil and disposal of surplus excavated soil as directed within a lead of 50
m.(i) loose/soft soil (a) Lift upto 1.5m
972 Filling in plinth with sandy soil under floors including watering 18.55 Cum 1385.000 25691.750
ramming,consolidating and dressing complete with a lead of 15 km
973 Concrete Works 0 0.000
974 Providing and laying cement concrete works in foundation and plinth 37.90 Cum 10564.000 400375.600
excluding the cost of centering & shuttering in (a) C.C. 1:4:8 (1 cement :4
Kanhaighat coarse sand :8 graded stone aggrt. 40mm nominal size).
977 Steel reinforcement for R.C.C. work including straightening, 6026.85 Kgs 159.000 958269.150
cutting,bending, placing in position and binding all complete.
978 Form Work 0 0.000
979 Providing form work i/c centering & shuttering so as to give a rough 0 0.000
finish strutting and propping etc. height of propping and centering
below supporting floor to ceiling not exceeding 4m and removal of
the same for insitu reinforced concrete to and plain concrete work
in.(using 12mm shuttering ply)
980 (a) Foundation footings, bases of columns etc. and mass concrete. 52.60 Sqm 1034.000 54388.400
981 Flooring Work 0 0.000
982 Granite stone slab flooring over 20 mm (average) thick base of cement 81.53 Sqm 8981.000 732220.930
mortar 1 : 6 (1 Cement: 6 Kanhaighat coarse sand) laid and jointed with
grey cement slurry including rubbing and polishing complete with -(a)
Granite slab 20 mm slab thick (i)Jade Black 60 x 120 cm
983 Providing & Fixing of Metal Singles with Cement Fiber Board 19mm thick 81.53 Sqm 3710.000 302476.300
including bitumen adshive etc as diected by Engineer In Charge
984 Steel work in built up tubular (round, square or rectangular hollow tubes 5429.95 Kgs 231.000 1254318.450
etc.) trusses etc., including cutting, hoisting, fixing in position and applying
a priming coat of approved steel primer, including welding and bolted with
special shaped washers etc. complete.
985 SH-X:Construction of Watch Tower 0 0.000
986 SH : EARTH WORK 0 0.000
987 Earth work in excavation in foundation trenches or drains i/c dressing of 9.06 m3 157.000 1422.420
sides and ramming of bottoms,including getting out the excavated soil
and disposal of surplus excavated soil as directed within a lead to 50 m.in
Hard dense soil. (a) Lift above 1.5 m
988 Filling available excavated earth (excluding rock) in trenches, plinth sides 2.72 m3 131.000 356.320
of foundation etc. in layers not exceeding 20cm in depth consolidating
each deposited layer by ramming & watering lead upto 50m and lift upto
1.5m.
989 Providing, laying naturally occurred sand gravel Grade -III free from 62.16 m3 1385.000 86091.600
organic or other deleterious constituants including watering
ramming,consolidating in layers not exceeding 150mm (Spread
thickness)and dressing etc. complete as directed by the Engineer-in-
charge
994 Providing Cast-in-situ reinforced cement concrete piles of 1:1:2 (1 cem:1 12.00 m3 17544.000 210528.000
c/sand:2 gr.st.aggrt 20 mm n/size) of 45 cm bore dia with length of
18.00m from existing G.L i/c reinforcement complete as per drawing and
technical specifications
995 Reinforcement for R.C.C.work including bending,binding and placing in 1003.51 Kg 159.000 159558.090
position complete
(b) TMT bars.
996 FORM WORKS 0 0.000
997 Providing form work i/c centering & shuttering so as to give a rough finish 16.45 m2 1034.000 17009.300
strutting and propping etc. height of propping and centering below
supporting floor to ceiling not exceeding 4m and removal of the same for
insitu reinforced concrete to and plain concrete work in.(using 12mm
shuttering ply)(a) Foundation footings, bases of columns etc. and mass
concrete.
1006 Banking excavated earth in layer not exceeding 20 cn in depth , breaking 558.15 m3 752.000 419728.800
clods , watering , rolling each layer with 1/2 tonne roller or wooden or
steel rammer and rolling every third and top most layer with power roller
of minimum 8 tonne and dressing up in embankment for roads marginal
banks flood banks and guide bank lead upto 50 metres and lift upto 1.5
metre (a) Hard / dense soil
1007 Providing and fixing of realisic statues of Manipur Olympians made of 19.00 each 588000.000 11172000
glass fibre and wax as per approved size , attired , paint , position etc.
Complete as directed by the Engineer in charge
Total in Figures 417216837.020
Quoted Rate in Figures Select 0.0000
Quoted Rate in Words
Project-olympic park
Amount for civil Amount for
S.No Description Total Work done value Remarks
work electrical work
Considering Amount 2.13 Cr
Against Granite Material &
1 Pavillion cum Hall 80,960,807.30 2,313,552.00 83,274,359.30 77,119,190.00
Amount 1.92 Cr Against DPI
Sheet Material.
2 Olympic Ring 7,541,995.30 195,797.00 7,737,792.30 10,202,264.00
3 Restaurant 26,216,453.94 907,765.00 27,124,218.94
4 DG Room & Electrical 3,122,137.00 598,651.00 3,720,788.00
5 Wash Room 4,437,277.36 321,229.00 4,758,506.36
6 Care Taker 2,862,206.84 207,788.00 3,069,994.84 2,143,875.26
7 Souvenir shop 5,446,521.53 440,278.00 5,886,799.53
8 Water Fountain 1,219,644.69 1,219,644.69
9 Nursery 912,147.71 10,663,380.00 11,575,527.71 12,219,866.66
10 R.C.C. Steps 36,551,226.68 36,551,226.68 20,336,900.18
11 Planter Box 19,007,634.83 19,007,634.83 65,540,876.42
12 Compound Wall 37,595,701.00 37,595,701.00
13 Main Gate 2,466,055.41 2,466,055.41 2,901,632.79
14 RCC Culvert 2,997,670.76 2,997,670.76
15 Retaining Wall 93,739,164.77 93,739,164.77 62,408,298.26
16 Water Tank 1,345,006.86 1,345,006.86 1064743.10
17 Hill Side Drain 7,235,635.33 7,235,635.33
18 RCC Intermediate Drain 12,533,988.44 12,533,988.44 8541304.10056751
19 Road Work 17,945,865.01 17,945,865.01
20 General & VIP Parking 3,623,649.51 3,623,649.51 10366683.5129049
21 Paver block 9,897,874.00 9,897,874.00 7691045.25
22 Ticket Counter 430,152.99 430,152.99 205321.22
23 Security Booth 414,475.00 414,475.00 329539.77
24 Display Gazebo 4,183,593.08 4,183,593.08 2830874.38983807
25 Watch Tower 5,935,980.50 5,935,980.50 35905.68
26 Hill Cutting & Development works 1,290,033.18 1,290,033.18 2468727.18
27 Wax Statue of Manipur Olympians 11,172,000.00 11,172,000.00
28 Monument 296255.347488615
Total= 401,084,899.02 15,648,440.00 416,733,339.02 286,703,303.12
Boq
Sl. Boq Qnty as
Item Description Units
No. Quantity per
Parker
758 SH 1 :-Hill Side Drain
759 SH : EARTH WORK
760 Earth work in excavation in foundation trenches or m3 1195.43
drains i/c dressing of sides and ramming of
bottoms,including getting out the excavated soil and
disposal of surplus excavated soil as directed within a
lead to 50 m.in Hard dense soil. (a) Lift above 1.5 m
157.000 187682.510
164.000 29705.320
0 0.000
10564.000 2104771.360
13976.000 418581.200
0 0.000
7827.000 3544222.140
484.000 950672.800
7,235,635.33
Boq
Sl. Boq Qnty as
Item Description Units
No. Quantity per
Parker
969 SH-W:Construction of Display Gazebo
970 Earth work
971 Earthwork in excavation foundation trenches or drains Cum 374.50 98.10
including dressing of sides and ramming of bottoms and
including getting out the excavated soil and disposal of
surplus excavated soil as directed within a lead of 50 m.(i)
loose/soft soil (a) Lift upto 1.5m
972 Filling in plinth with sandy soil under floors including Cum 18.55 67.39
watering ramming,consolidating and dressing complete
with a lead of 15 km
973 Concrete Works
974 Providing and laying cement concrete works in foundation Cum 37.90 5.97
and plinth excluding the cost of centering & shuttering in
(a) C.C. 1:4:8 (1 cement :4 Kanhaighat coarse sand :8
graded stone aggrt. 40mm nominal size).
977 Steel reinforcement for R.C.C. work including Kgs 6026.85 3410.86
straightening, cutting,bending, placing in position and
binding all complete.
978 Form Work
979 Providing form work i/c centering & shuttering so as
to give a rough finish strutting and propping etc.
height of propping and centering below supporting
floor to ceiling not exceeding 4m and removal of the
same for insitu reinforced concrete to and plain
concrete work in.(using 12mm shuttering ply)
980 (a) Foundation footings, bases of columns etc. and mass Sqm 52.60 102.48
concrete.
981 Flooring Work
982 Granite stone slab flooring over 20 mm (average) thick Sqm 81.53 62.73
base of cement mortar 1 : 6 (1 Cement: 6 Kanhaighat
coarse sand) laid and jointed with grey cement slurry
including rubbing and polishing complete with -(a) Granite
slab 20 mm slab thick (i)Jade Black 60 x 120 cm
983 Providing & Fixing of Metal Singles with Cement Fiber Sqm 81.53 62.73
Board 19mm thick including bitumen adshive etc as
diected by Engineer In Charge
984 Steel work in built up tubular (round, square or rectangular Kgs 5429.95 3486.14
hollow tubes etc.) trusses etc., including cutting, hoisting,
fixing in position and applying a priming coat of approved
steel primer, including welding and bolted with special
shaped washers etc. complete.
BASIC TOTAL AMOUNT Boq Amount as
RATE Without Taxes per Parker
0 0.000
0 0.000
157.000 58796.500 15402.41
0 0.000 0.00
10564.000 400375.600 63094.17
0 0.000 0.00
16544.000 397056.000 409308.87
0 0.000 0.00
0 0.000 0.00
0 0.000 0.00
8981.000 732220.930 563405.07
3710.000 302476.300 232739.43
4,183,593.08 2,830,874.39
Details of Measurement (Gazebo)
Length Width
SI No Item Description Unit Nos
(m) (m)
Earth work in excavation in foundation trenches or drains i/c dressing of sides and ramming of bottom
getting out the excavated soil and disposal of surplus excavated soil as directed within a lead to 50 m.i
soil. (a) Lift above 1.5 m
Filling in plinth with sandy soil under floors including watering ramming,consolidating and dressing com
lead of 15 km
P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering : - (a) 1:4:8
Kanhaighat coarse sand:: 8 graded stone aggrt. 40mm nominal size).
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of ce
shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1:2 (1 cement :1 Kanhaighat c
graded stone aggregate 20 mm nominal size.)
Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. h
propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same fo
reinforced concrete to and plain concrete work in.(using 12mm shuttering ply)
Granite stone slab flooring over 20 mm (average) thick base of cement mortar 1 : 6 (1 Cement: 6 Kanh
sand) laid and jointed with grey cement slurry including rubbing and polishing complete with -(a) Gran
slab thick (i)Jade Black 60 x 120 cm
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cu
fixing in position and applying a priming coat of approved steel primer, including welding and bolted w
shaped washers etc. complete.
Gazebo 1
Hollow Square 50x50x4mm Kg 4 1.50 6.00
50x50x4mm Kg 8 1.20 9.56
50x50x4mm Kg 8 1.42 11.39
50x50x4mm Kg 4 0.71 2.84
50x50x4mm Kg 8 1.17 9.34
50x50x4mm Kg 4 1.22 4.88
50x50x4mm Kg 4 1.32 5.28
50x50x4mm Kg 4 0.30 1.22
150 X 150 X 4 Square hollow pipe Kg 8 3.05 24.39
150 X 150 X 4 Square hollow pipe Kg 4 0.61 2.44
2" Dia Tubular Pipe Straight Kg 8 1.54 12.32
2" Dia Tubular Pipe Curve Kg 16 1.40 22.40
3" DiaTubular Pipe Kg 8 1.54 12.32
3" Dia Tubular Pipe Kg 16 1.40 22.40
Gazebo 2
Hollow Square 50x50x4mm Kg 4 1.50 6.00
50x50x4mm Kg 8 1.20 9.56
50x50x4mm Kg 8 1.42 11.39
50x50x4mm Kg 4 0.71 2.84
50x50x4mm Kg 8 1.17 9.34
50x50x4mm Kg 4 1.22 4.88
50x50x4mm Kg 4 1.32 5.28
50x50x4mm Kg 4 0.30 1.22
150 X 150 X 4 Square hollow pipe Kg 8 3.05 24.39
150 X 150 X 4 Square hollow pipe Kg 4 0.61 2.44
2" Dia Tubular Pipe Straight Kg 8 1.54 12.32
2" Dia Tubular Pipe Curve Kg 16 1.40 22.40
3" DiaTubular Pipe Kg 8 1.54 12.32
3" Dia Tubular Pipe Kg 16 1.40 22.40
Gazebo 3
Hollow Square 50x50x4mm Kg 4 1.50 6.00
50x50x4mm Kg 8 1.20 9.56
50x50x4mm Kg 8 1.42 11.39
50x50x4mm Kg 4 0.71 2.84
50x50x4mm Kg 8 1.17 9.34
50x50x4mm Kg 4 1.22 4.88
50x50x4mm Kg 4 1.32 5.28
50x50x4mm Kg 4 0.30 1.22
150 X 150 X 4 Square hollow pipe Kg 8 3.05 24.39
150 X 150 X 4 Square hollow pipe Kg 4 0.61 2.44
2" Dia Tubular Pipe Straight Kg 8 1.54 12.32
2" Dia Tubular Pipe Curve Kg 16 1.40 22.40
3" DiaTubular Pipe Kg 8 1.54 12.32
3" Dia Tubular Pipe Kg 16 1.40 22.40
2nd class (local first class) brick work in foundation and plinth in cement mortar 1: 4 (1 Cem:4 kanhaig
Half brick masonry 2nd class (local first class) in cement mortar 1:4 (1 cement : 4 kanhaighat coarse sa
superstructure above plinth.
Providing and laying vitrified tiles in different sizes (thickness 8 mm thick) with water absorption less t
conforming to IS 15622,of approved make ,in all colours & shades laid on 20mm thick cement mortar 1
c/sand),i/c routing the joints with white cement & matching pigments etc,complete
(i)size of tile-600x600mm (Double charged)branded
Providing and laying vitrified tiles in different sizes (thickness 8 mm thick) with water absorption less t
conforming to IS 15622,of approved brand and manufacturer ,in all colours & shades,in skirting ,riser o
cement based high polymer modified quick set tile adhesive.(i)size of tile-600x600mm (Double charge
Steel work in built up (square & hollow section) trusses including cutting, hoisting, fixing in position an
coat of approved steel primer red oxide chrom primer conforming to IS 2079, welded and bolted inclui
shape washer etc. complete.
Providing and laying vitrified tiles in different sizes (thickness 8 mm thick) with water absorption less t
conforming to IS 15622,of approved make ,in all colours & shades laid on 20mm thick cement mortar 1
c/sand),i/c routing the joints with white cement & matching pigments etc,complete
(i)size of tile-600x600mm (Double charged)branded
Providing & fixing of Metal Shingles panel for roofing characterised with ASTM class A fire rating,with w
in corporating with IECC solar reflectance index with minimum vapor permeance of 15 under high tem
with compatible metal fasteners
Providing & fixing 19 mm thick cement fibre board for cushion of roofing as per approved design
Providing and fixing 12mm thick HPL Board
Painting on wall with (two coats) of plastic emulsion paint of approved quality in all shades on new wo
even shade.
2.150 98.10
Total 98.10
solidating and dressing complete with a
2.150 98.10
0.150 -5.97 3.142857 1.905 1.905 0.45
0.450 -15.40
2.032 -6.66
0.400 -2.69 8.718286
Total 67.39
g and shuttering : - (a) 1:4:8 (1 cem :4
0.450 15.40
2.032 6.66
0.400 2.69 8.718286
Total 24.74
rutting and propping etc. height of
nd removal of the same for insitu
y)
9.984321
0.150 5.81
0.450 16.16
2.032 59.00
0.800 21.50
Total 102.48
tar 1 : 6 (1 Cement: 6 Kanhaighat coarse
ng complete with -(a) Granite slab 20 mm
46.56
0.150 4.50 13.97038
0.150 5.39
0.150 6.29
Total 62.73
luding bitumen adshive etc as diected by
0.00
0.00
0.00
Total 0.00
.) trusses etc., including cutting, hoisting,
ding welding and bolted with special
0.00
0.00
0.00
0.00
Total 0.00
nt : 4 kanhaighat coarse sand) in
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Total 0.00
th water absorption less than 0.08% and
mm thick cement mortar 1:4 (1 cem : 4
mplete
0.00
0.00
0.00
0.00
0.00
0.00
Total 0.00
th water absorption less than 0.08% and
& shades,in skirting ,riser of steps laid with
0x600mm (Double charged)branded
0.15 0.15
0.150 0.15
Total 0.30
isting, fixing in position and applying a
, welded and bolted incluiding special
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Total 0.00
th water absorption less than 0.08% and
mm thick cement mortar 1:4 (1 cem : 4
mplete
0.00
0.00
0.00
Total 0.00
M class A fire rating,with wind resistance
ance of 15 under high temperature along
0.000
0.000
0.000
Total 0.00
per approved design
0.000
0.000
0.000
Total 0.00
0.00
0.00
Total 0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Total 0.00
1.52439
0.00 2.323766
0.00
0.00
0.00
0.00
0.00
0.00
Total 0.00
ty in all shades on new work to give an
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Total 0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00 0
0.00
0.00
0.00
0.00
0.00
0.00
Total 0.00
of stone aggrt. 40 mm nominal size wall
crete smooth.
0.00
0.00
Total 0.00
nt : 3 Kanhaighat sand : 6 graded stone
h.
0.00
0.00
Total 0.00
BAR BENDING SCHEDULE
length
Dia
of No of No of Total No
SI No Description / Particulars Spacing Shape of bar
bar item bars of bars
A
RCC FOOTING 32
Pedestel 0
Grade Beam
R BENDING SCHEDULE-GAZEBO
Lap/
length Devlopm 0.394 0.615 0.886 1.575
Cutting Total
ent length length
B C D E length 8MM 10MM 12MM 16MM
0.000 0 - - - -
- - - -
0.000 0 - - - -
- -
13.7641 0.015625 2 7.415787213776
- -
13.7641 0.0625 7.40313447129
- -
13.7641 0.140625 7.381998374424
- -
13.7641 0.25 7.35230576078
- -
13.7641 0.390625 7.313952419862
- -
13.7641 0.5625 7.266801221996
- -
13.7641 0.765625 7.210679579624
- -
13.7641 1 7.145376127259
- -
13.7641 1.265625 7.070636463572
- -
13.7641 1.5625 6.986157742279
- -
13.7641 1.890625 6.891581821324
- -
13.7641 2.25 6.786486572594
- -
13.7641 2.640625 6.670374802063
- -
13.7641 3.0625 6.542660009507
- -
13.7641 3.515625 6.402647889741
- -
13.7641 4 6.249511980947
- -
.5
.83 .5
- -
- -
- -
- -
2.378
- - 2.378
.58
- -
.5
- - 2.378
- -
- -
0.00 0.00
Sl.
Item Description Units
No.
447 Filling available excavated earth (excluding rock) in trenches, plinth sides m3
of foundation etc. in layers not exceeding 20cm in depth consolidating
each deposited layer by ramming & watering lead upto 50m and lift upto
1.5m.
448 Providing, laying naturally occurred sand gravel Grade -III free from m3
organic or other deleterious constituants including watering
ramming,consolidating in layers not exceeding 150mm (Spread
thickness)and dressing etc. complete as directed by the Engineer-in-
charge
454 RCC work in beams, suspended floors, roofs having slope upto 15 degree m3
landings, balconies,shelves,chajjas, lintels,bands,plain window
sill,staircases and spiral staircase upto floor five level but excluding the
cost of centering, shuttering ,finishing and reinforcement (a) 1:1:2 (1
cement : 1 Kanhaighat coarse sand: : 2 graded stone aggrt. 20mm
nominal size).
455 Reinforcement for R.C.C.work including bending,binding and placing in Kg
position complete
(b) TMT bars.
456 FORM WORKS
457 Providing form work i/c centering & shuttering so as to give a rough finish m2
strutting and propping etc. height of propping and centering below
supporting floor to ceiling not exceeding 4m and removal of the same for
insitu reinforced concrete to and plain concrete work in.(using 12mm
shuttering ply)(a) Foundation footings, bases of columns etc. and mass
concrete.
458 (b) Columns, pillars, posts and struts (square, rectangular or polygon in m2
plan).
459 (c) Sides & soffits of beams, beam haunchings, cantilevers, girders, m2
bressummers and lintels not exceeding 1m in depth.
463 Providing and laying vitrified tiles in different sizes (thickness 8 mm thick) m2
with water absorption less than 0.08% and conforming to IS 15622,of
approved make ,in all colours & shades laid on 20mm thick cement
mortar 1:4 (1 cem : 4 c/sand),i/c routing the joints with white cement &
matching pigments etc,complete
(i)size of tile-600x600mm (Double charged)branded
464 Providing and laying vitrified tiles in different sizes (thickness 8 mm thick) m2
with water absorption less than 0.08% and conforming to IS 15622,of
approved brand and manufacturer ,in all colours & shades,in
skirting ,riser of steps laid with cement based high polymer modified
quick set tile adhesive.(i)size of tile-600x600mm (Double
charged)branded
465 Steel work in built up (square & hollow section) trusses including cutting, kg
hoisting, fixing in position and applying a coat of approved steel primer
red oxide chrom primer conforming to IS 2079, welded and bolted
incluiding special shape washer etc. complete.
466 Providing and fixing false ceiling at all height including providing and Sqm
fixing of frame work made of special section, power pressed from MS
sheets and galvanized with zinc coating of 120 gms/sqm (both side
inclusive) as per IS:277 and consisting of angle cleats of size 25 mm wide
X 1.6 mm thick with flages of 27mm and 30 mm long, the perimeter of
ceiling fixing to wall/partition with the help of rawl plugs at 450 mm centre
with 25 mm long dry wall screws @ 230 mm interval, including fixing of
gypsum board to i) Fully Perforated Gypsum Plaster Board of size
1200X2400X12.5 mm having approx. 15% perforated area with
perforation size and pattern as approved by the Engineer-in charge.
467 Providing & fixing of Metal Shingles panel for roofing characterised with m2
ASTM class A fire rating,with wind resistance in corporating with IECC
solar reflectance index with minimum vapor permeance of 15 under high
temperature along with compatible metal fasteners
468 Providing & fixing 19 mm thick cement fibre board for cushion of roofing m2
as per approved design
469 Trapzoidal Pre-painted Profile Sheet for Ridges, Gutter or valley 610 mm Rm
wide of approved brand DYNA Roof or equivalent fixed with selt drilling
screws of 68 mm long Xylon coated screw with PVC washer & cap
complete excluding the coat of purlins rafter & trusses.a) Pre painted
alvalume sheet(PPGL) i) Sheet 0.50mm/4.2 kgs/sqm
474 Painting on wall with (two coats) of plastic emulsion paint of approved m2
quality in all shades on new work to give an even shade.
475 Providing and applying wall putty/plaster of paris putty of 2 mm thickness m2
over plaster surface to prepared the surface even and smooth complete.
476 Applying one coat of cement primer of approved quality on wall surface. m2
477 Finishing walls weather shield paint of approved quality on new work m2
( three or more coats ) to give an even shade.
478 Providing under layer for plinth protection of 75 mm thick (unconsolidated) m2
of stone aggrt. 40 mm nominal size wall rammed & consolidated &
grouted with fine sand i/c finishing the top of concrete smooth.
483 Group A pt
484 Group B pt
485 Group C pt
486 Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper pt
conductor single core cable in surface/recessed PVC conduit with 1 No.
4mm2 FR PVC insulated copper conductor single core cable for loop
earthing etc.as reqd.
487 Wiring for circuit/Sub-main wiring with earth wire with (the following
sizes of) FR PVC ins.cu.cond single core cable in surface/recessed
PVC conduit etc.as reqd.
488 2X1.5mm2+1X1.5mm2 earth wire mt
489 2X2.5mm2+1X2.5mm2 earth wire mt
490 2X4mm2+1X4mm2 earth wire mt
491 2X10mm2+1X10mm2 earth wire mt
492 Supply and fixing (following modular type switch/socket) on the
existing switch box/cover i/c connection etc as reqd.
493 5/6 amps switch each
494 15/16 amps switch each
495 3 pin 5/6 amps socket outlet each
496 6 pin 15/16 amps socket outlet each
497 P/L 4mm2 twin core pvc ins.(heavy duty) Cu. cond. armoured cable of mt
1.IKV grade in size not exceedng 25mm2 direct in ground i/c excavation,
sand cushioning protective covering and refilling the trench etc.as reqd.
498 S/F brass batten/angle holder i/c connection etc.as reqd. each
499 S/F 12W LED bulb. each
500 SITC surface mounted LED Down Lighter with white powder coated Al. each
housing with integrated electronic driver 15 W 840 LHEAAGP6IA2W012
complete with connection as rqd. (Havell's)
501 S/F 48"sweep (1200mm) AC ceiling fan complete with down rod,canopy, each
3 (three) bladesetc.as reqd. (Make Bajaj/Usha/Crompton/Orient)
502 S/F stepped type electronic fan regulator on the existing modular plate each
sewitch box i/c connection but excluding modular plate etc.
503 S/F fan hook i/c bolt & nuts. each
504 Installation of exhaust fan upto 450mm sweep in the existing opening i/c each
making the hole to suit the size of the above fan, making good the
damaged, connection testing commissioning etc. as reqd.
505 S/F 305mm sweep exhaust fan complete with accessories i/c connection each
etc. as reqd.
506 P/F 30 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling each
holes on the board connection, earthing the body etc.as reqd.
507 S/F (following way) single pole and nuetral, sheet steel MCCB each
distributuion board, 240V on surface/recessed complete with tinned
copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic
cover for the MCCB knobs detachable gland plate, interconnection,
phosphatized and powder painted i/c earthing etc as reqd (but without
MCB/RCCB/Isolator) (a) 2+4 way single door
508 S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and
other load of (following poles) in the existing MCB DB complete with
connection testing and commissioning etc.as reqd. (a) Single pole
513 Earthing with copper plate 600x600x6mm thick i/c accessories and set
providing masonary enclosure with copper plate having locking
arrangement and watering pipes etc.(but without charcoal and salt
complete as reqd.)
514 Extra for charcoal and salt for G.I.plates or copper plate earth electrode set
as reqd.
515 P/F 4.06mm dia.copper wire on surface or in recess for loop earthing mt
etc.as reqd.
Boq Qnty TOTAL
Boq BASIC Boq Amount
as per AMOUNT
Quantity RATE as per Parker
Parker Without Taxes
0 - -
17.48 6.23 10564.000 184,658.72 65,779.92
0 - -
21.56 13.80 16544.000 356,688.64 228,249.30
0 - -
54.38 29.84 1034.000 56,228.92 30,855.80
0 - -
4.27 6.41 16987.000 72,534.49 108,864.93
0 - -
0 - -
0.00 0 - -
0.00 0 - -
3,069,373.84 2,143,875.26
Details of Measurement (Care Taker)
Length Width
SI No Item Description Unit Nos
(m) (m)
Earth work in excavation in foundation trenches or drains i/c dressing of sides and ramming of bottom
getting out the excavated soil and disposal of surplus excavated soil as directed within a lead to 50 m.i
soil. (a) Lift above 1.5 m
P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering : - (a) 1:4:8
Kanhaighat coarse sand:: 8 graded stone aggrt. 40mm nominal size).
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of ce
shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1:2 (1 cement :1 Kanhaighat c
graded stone aggregate 20 mm nominal size.)
RCC work in in walls (any thickness), including attached pilasters, buttresses, plinth and string ourses,fi
pillars, piers,abutment, posts and struts etc. upto floor five level excluding the cost of centering, shutte
and reinforcement (a) 1:1:2 (1 cement : 1 Kanhaighat coarse sand: : 2 graded stone aggrt. 20mm nomin
RCC work in beams, suspended floors, roofs having slope upto 15 degree landings, balconies,shelves,ch
lintels,bands,plain window sill,staircases and spiral staircase upto floor five level but excluding the cos
shuttering ,finishing and reinforcement (a) 1:1:2 (1 cement : 1 Kanhaighat coarse sand: : 2 graded stone
nominal size).
Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. h
propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same fo
reinforced concrete to and plain concrete work in.(using 12mm shuttering ply)(a) Foundation footings,
columns etc. and mass concrete.
(b) Columns, pillars, posts and struts (square, rectangular or polygon in plan).
Column upto Plinth Sqm 14 0.60
(c) Sides & soffits of beams, beam haunchings, cantilevers, girders, bressummers and lintels not exceed
depth.
Lintle Sqm 4 4.61
Lintle Sqm 4 2.91
Lintle Sqm 2 1.71
Lintle Sqm 1 7.01
Roof Band Sqm 2 0.600
Roof Band Sqm 2 0.600
Roof Band Sqm 1 0.600
Sqm 1 7.16
2nd class (local first class) brick work in foundation and plinth in cement mortar 1: 4 (1 Cem:4 kanhaig
Half brick masonry 2nd class (local first class) in cement mortar 1:4 (1 cement : 4 kanhaighat coarse sa
superstructure above plinth.
wall Sqm 2 6.56
wall Sqm 2 3.66
wall Sqm 1 3.66
Sqm 1 6.86
Window Sqm -2 1.22
Door Sqm -1 2.13
Ventilator Sqm -1 0.46
Lintle Sqm -4 4.76
Lintle Sqm -4 3.06
Lintle Sqm -2 1.86
Providing and laying vitrified tiles in different sizes (thickness 8 mm thick) with water absorption less t
conforming to IS 15622,of approved make ,in all colours & shades laid on 20mm thick cement mortar 1
c/sand),i/c routing the joints with white cement & matching pigments etc,complete
(i)size of tile-600x600mm (Double charged)branded
Providing and laying vitrified tiles in different sizes (thickness 8 mm thick) with water absorption less t
conforming to IS 15622,of approved brand and manufacturer ,in all colours & shades,in skirting ,riser o
cement based high polymer modified quick set tile adhesive.(i)size of tile-600x600mm (Double charge
Steel work in built up (square & hollow section) trusses including cutting, hoisting, fixing in position an
coat of approved steel primer red oxide chrom primer conforming to IS 2079, welded and bolted inclui
shape washer etc. complete.
Providing and laying vitrified tiles in different sizes (thickness 8 mm thick) with water absorption less t
conforming to IS 15622,of approved make ,in all colours & shades laid on 20mm thick cement mortar 1
c/sand),i/c routing the joints with white cement & matching pigments etc,complete
(i)size of tile-600x600mm (Double charged)branded
Providing & fixing of Metal Shingles panel for roofing characterised with ASTM class A fire rating,with w
in corporating with IECC solar reflectance index with minimum vapor permeance of 15 under high tem
with compatible metal fasteners
Square side sqm 2 3.5 2.74
Triangle side sqm 4 2.45 2.74
Triangle side sqm 4 2.74 2.43
Providing & fixing 19 mm thick cement fibre board for cushion of roofing as per approved design
Square side sqm 2 3.5 2.74
Triangle side sqm 4 2.45 2.74
Triangle side sqm 4 2.74 2.43
Painting on wall with (two coats) of plastic emulsion paint of approved quality in all shades on new wo
even shade.
wall Sqm 2 6.56
wall Sqm 2 3.66
wall Sqm 1 3.66
Sqm 1 6.86
wall Top Sqm 1 20.74
window side Sqm 1 13.50
Window Sqm -2 1.22
Door Sqm -1 2.13
Ventilator Sqm -1 0.46
Providing under layer for plinth protection of 75 mm thick (unconsolidated) of stone aggrt. 40 mm nom
rammed & consolidated & grouted with fine sand i/c finishing the top of concrete smooth.
Plinth protection Front & back Sqm 2 4.27 0.61
Plinth protection both side Sqm 2 8.99 0.61
1.500 42.00
1.500 4.01
1.500 2.48 6.859756
1.500 3.09 3.963415
1.500 0.70
Total 52.29
g and shuttering : - (a) 1:4:8 (1 cem :4
0.150 2.36
0.150 0.40
0.150 0.25 4.054878
0.150 0.31
0.150 0.07
0.100 2.84
Total 6.23 6.95122
te, excluding the cost of centering,
(1 cement :1 Kanhaighat coarse sand:2
0.200 2.02
9.94 0.333333 0.09 1.44 0.1296
1.200 0.76 0.36
0.150 0.59
0.150 0.33
0.150 0.16
0.300 0.62
Total 13.80
plinth and string ourses,fillets,columns,
he cost of centering, shuttering ,finishing
stone aggrt. 20mm nominal size).
2.740 1.73
Total 1.73
dings, balconies,shelves,chajjas,
evel but excluding the cost of centering,
arse sand: : 2 graded stone aggrt. 20mm
0.150 0.30
0.150 0.16
0.150 0.08
0.150 0.15
0.150 0.15
0.150 0.59
0.150 0.33
0.150 0.16
0.150 0.31
Total 2.24
rutting and propping etc. height of
nd removal of the same for insitu
y)(a) Foundation footings, bases of
0.150 6.30
0.150 2.86
0.150 1.84 4.054878
0.150 0.56
0.150 1.07
0.200 3.36
3.78 0.333333 0.09 1.44 0.1296
1.200 10.08
Total 29.84 #REF!
n). 0.333333 1.5
2.740 23.02
Total 23.02 #REF!
mers and lintels not exceeding 1m in
0.150 2.77
0.150 1.75 4.054878
0.150 0.51
0.150 1.05
6.56 7.87
3.66 4.39
3.66 2.20
0.150 1.07
Total 21.61
rtar 1: 4 (1 Cem:4 kanhaighat C/Sand)
0.900 2.72
0.900 1.52
0.900 0.76
0.900 1.42
Total 6.41
nt : 4 kanhaighat coarse sand) in
3.049 40.00
3.049 22.32
3.049 11.16
3.049 20.91
1.220 -2.97
0.762 -1.63
0.762 -0.35
0.150 -2.86
0.150 -1.84 4.054878
0.150 -0.56
Total 84.19
th water absorption less than 0.08% and
mm thick cement mortar 1:4 (1 cem : 4
mplete
15.71
0.27
5.86
3.90
0.73
2.95
Total 29.42
th water absorption less than 0.08% and
& shades,in skirting ,riser of steps laid with
0x600mm (Double charged)branded
0.15 0.39
0.150 0.14
Total 0.52
isting, fixing in position and applying a
, welded and bolted incluiding special
5.78 96.41
5.78 80.69
5.78 47.63
5.78 32.83
5.78 64.16
5.78 63.23
5.78 55.49
5.78 30.52
5.78 14.10
3.95 22.91
3.95 7.11
6.38 122.50
6.38 118.67
6.38 15.31
6.38 54.49
Total 826.04
th water absorption less than 0.08% and
mm thick cement mortar 1:4 (1 cem : 4
mplete
3.96 15.71
2.134 5.86
2.134 3.90
Total 25.47
M class A fire rating,with wind resistance
ance of 15 under high temperature along
19.180
13.426
13.316
Total 45.92
per approved design
19.180
13.426
13.316
Total 45.92
0.600 6.59
0.600 9.70
Total 16.28
3.049 40.00
3.049 22.32
3.049 11.16 20.74
3.049 20.91
0.300 6.22
0.150 2.03
1.220 -2.97
0.762 -1.63
0.762 -0.35
Total 97.69
2.743902
3.049 40.00 7.529536
3.049 22.32 3.138997
3.049 11.16
3.049 20.91
1.220 -2.97
0.762 -1.63 3.506098 27.5
0.762 -0.35
Total 89.44
ty in all shades on new work to give an
3.049 40.00
3.049 22.32
3.049 11.16 20.74
3.049 20.91
0.300 6.22
0.150 2.03
1.220 -2.97
0.762 -1.63
0.762 -0.35
Total 97.69
3.049 40.00
3.049 22.32
3.049 11.16 20.74
3.049 20.91
0.300 6.22
0.150 2.03
1.220 -2.97
0.762 -1.63
0.762 -0.35
3.049 40.00 7.529536
3.049 22.32 2.744
3.049 11.16
3.049 20.91
1.220 -2.97
0.762 -1.63 3.506098 27.5
0.762 -0.35
Total 187.13
of stone aggrt. 40 mm nominal size wall
crete smooth.
5.21
10.97
Total 16.17
nt : 3 Kanhaighat sand : 6 graded stone
h.
5.21
10.97
Total 16.17
1.52439
2.323766
0
BAR BENDING SCHEDULE-Car
length
Dia
of No of No of Total No
SI No Description / Particulars Spacing Shape of bar
bar item bars of bars
A
RCC FOOTING
d
column master ring 8 0.125 a e c 7 16 112 0.22
d
a c
3 Side Thread Bar 8 0.125 1 254 254 0.100
b
Column
d
column master ring 8 0.125 a e c 7 29 203 0.22
b
For gate Footing
1 Bar in Bottom 12 b 1 1 1 0.100
Lintel for
1 Bar in Bottom 10 b 1 2 2 0.050
b
2 Bar in Bottom 10 1 2 2 0.050
d
a c
3 Side Thread Bar 8 0.125 1 254 254 0.100
b
Roof Band for
1 Bar in Bottom 12 b 1 2 2 0.050
b
2 Bar in Bottom 12 1 2 2 0.050
d
a c
3 Side Thread Bar 8 0.125 1 254 254 0.250
b
ENDING SCHEDULE-Care taker
Room
Lap/
length Devlopm 0.394 0.615 0.886 1.575
Cutting Total
ent length length
B C D E length 8MM 10MM 12MM 16MM
- - - -
- - - -
31.600 0.050 0.60 32.300 64.6 - - 57.25 -
20MM 25MM
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
0.00 0.00
Sl. Boq
Item Description Units
No. Quantity
741 Filling available excavated earth (excluding rock) in trenches, plinth m3 12.04
sides of foundation etc. in layers not exceeding 20cm in depth
consolidating each deposited layer by ramming & watering lead upto
50m and lift upto 1.5m.
742 Providing, laying naturally occurred sand gravel Grade -III free from m3 12.30
organic or other deleterious constituants including watering
ramming,consolidating in layers not exceeding 150mm (Spread
thickness)and dressing etc. complete as directed by the Engineer-
in-charge
747 RCC work in in walls (any thickness), including attached pilasters, m3 11.70
buttresses, plinth and string ourses,fillets,columns, pillars,
piers,abutment, posts and struts etc. upto floor five level excluding
the cost of centering, shuttering ,finishing and reinforcement (a)
1:1:2 (1 cement : 1 Kanhaighat coarse sand: : 2 graded stone aggrt.
20mm nominal size).
751 (b) Columns, pillars, posts and struts (square, rectangular or m2 43.40
polygon in plan).
752 ( d)Flat surface such as suspended floor,roofs,landing & the like ( i) m2 25.00
floor etc upto 200mm in thickness
753 (e)Edges of slab and breaks in floors and walls (i) Under 20cm wide Rm 58.60
755 P/F C.I cover with frame for (manhole and chamber) (a) 600x450mm Each 2.00
(Heavy duty)
756 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, Rm 70.00
having thermal stability for hot & cold water supply including all
CPVC plain & brass threaded fittings This includes jointing of pipes
& fittings with one step CPVC solvent cement, trenching, refilling &
testing of joints complete as per direction of Engineer in
Charge.External work 25 mm nominal outer dia Pipes
Boq Qnty
BASIC TOTAL AMOUNT Boq Amount
as per
RATE Without Taxes as per Parker
Parker
0 0.00
0 0.00
55.68 157.00 6300.41 8741.38
1345006.86 1064743.10
Details of Measurement (Water Tank)
Length Width Height
SI No Item Description Unit Nos
(m) (m) (m)
Earth work in excavation in foundation trenches or drains i/c dressing of sides and ramming of
bottoms,including getting out the excavated soil and disposal of surplus excavated soil as directed with
lead to 50 m.in Hard dense soil. (a) Lift above 1.5 m
Total
(c) Sides & soffits of beams, beam haunchings, cantilevers, girders, bressummers and lintels not exceed
1m in depth.
Bottom slab Sqm 1 4.57 2.740
Beam Sqm 2 4.57 0.40
Beam Sqm 3 1.74 0.40
Top Slab Sqm 1 4.17 2.340
Total
(e)Edges of slab and breaks in floors and walls (i) Under 20cm wide
Total
Providing & fixing 19 mm thick cement fibre board for cushion of roofing as per approved design
Total
12mm cement plaster 1:4 (1 cement : 4 Kanhaighat coarse sand:).
Total
15mm cement plaster 1:4 (1 cement : 4 Kanhaighat coarse sand:).
Total
)
Qnty Remarks
des and ramming of
cavated soil as directed within a
55.68
55.68
ng and shuttering : - (a) 1:4:8 (1
.
2.72
2.72
ete, excluding the cost of
vel : (a)1:1:2 (1 cement :1
7.02
1.34
1.05
0.63
10.04
s, plinth and string
oor five level excluding the cost
Kanhaighat coarse sand: : 2
0.88 22.65
0.55
0.31
3.13
2.79
1.30
0.62
0.53
0.35
2.44
-0.29
12.60
strutting and propping etc.
eding 4m and removal of the
mm shuttering ply)(a)
2.61
7.57
13.44
6.12
3.65
33.39
an).
8.78
13.93
11.65
7.74
6.47
4.65
0.23
0.23
53.68
mmers and lintels not exceeding
12.52
3.66
2.09
9.76
28.02
9.14
5.22
9.14
5.22
28.72
h a floating coat of neat
8.78
13.93
7.74
9.76
12.52
3.66
2.09
58.48
oisting, fixing in position and
ng to IS 2079, welded and
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
STM class A fire rating,with wind
apor permeance of 15 under
0.000
0.000
0.000
0.00
s per approved design
0.000
0.000
0.000
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
BAR BENDING SCHEDULE-(WATER TANK)
Lap/
length Devlopme 0.394 0.615 0.886 1.575 2.462 3.846
Dia of No of No of Total No Cutting Total
SI No Description / Particulars Spacing Shape of bar nt length
bar item bars of bars length length
A B C D E 8MM 10MM 12MM 16MM 20MM 25MM
RCC FOOTING
b
Top& Bottom Bar 12 0.125 c 2 40 80 0.325 3.064 0.325 3.714 297.12 - - 263.29 - - -
a
b
Top Bar y-y 12 0.125 c 1 26 26 0.325 4.894 0.325 5.544 144.144 - - 127.73 - - -
a
b
Grade Beam
1 Top & Bottom Main Bar 16 b 4 6 24 0.360 4.29 0.360 5.010 120.24 - - - 189.42 - -
b
d
3 Ring 8 0.125 2 36 72 0.320 0.220 0.320 0.220 0.150 1.230 88.56 34.88 - - - - -
1 Top & Bottom Main Bar 16 b 6 6 36 0.360 2.464 0.360 3.184 114.624 - - - 180.58 - -
b
d
3 Ring 8 0.125 2 21 42 0.320 0.220 0.320 0.220 0.150 1.230 51.66 20.35 - - - - -
Column - - - - - -
1 Top & Bottom Main Bar 16 2 6 12 0.360 4.494 0.360 5.214 62.568 - - - 98.57 - -
b
d
3 Ring 8 0.125 2 37 74 0.370 0.220 0.370 0.220 0.150 1.330 98.42 38.76 - - - - -
1 Top & Bottom Main Bar 16 b 3 6 18 0.360 2.664 0.360 3.384 60.912 - - - 95.96 - -
b
BAR BENDING SCHEDULE-(WATER TANK)
Lap/
length Devlopme 0.394 0.615 0.886 1.575 2.462 3.846
Dia of No of No of Total No Cutting Total
SI No Description / Particulars Spacing Shape of bar nt length
bar item bars of bars length length
A B C D E 8MM 10MM 12MM 16MM 20MM 25MM
b
d
3 Ring 8 0.125 3 23 69 0.320 0.220 0.320 0.220 0.150 1.230 84.87 33.43 - - - - -
Slab - - - - - -
1 Top & Bottom Main Bar X-X 10 0.125 2 21 42 0.150 4.494 0.150 4.794 201.348 - 123.91 - - - -
2 Top & Bottom Main Bar Y-Y 10 0.125 2 37 74 0.150 2.44 0.150 2.740 202.76 - 124.78 - - - -
Wall - - - - - -
Wall inside - - - - - -
1 Top & Bottom Main Bar X-X 10 0.150 2 21 42 0.150 4.494 0.150 4.794 201.348 - 123.91 - - - -
2 Top & Bottom Main Bar Y-Y 10 0.150 2 37 74 0.150 2.44 0.150 2.740 202.76 - 124.78 - - - -
603 Filling available excavated earth (excluding rock) in trenches, plinth sides m3
of foundation etc. in layers not exceeding 20cm in depth consolidating
each deposited layer by ramming & watering lead upto 50m and lift upto
1.5m.
612 Providing & fixing M.S. round holding down or anchor bolts with nuts & Qtl
washer plates complete.
613 Painting (two or more coats excluding priming coat) with superior ready m2
mixed paint for steel work of approved quality in all shades on new steel
work to give an even shade.
614 Providing External Solar Lighting
615 Supply, Installation, Testing & Commissioning of solar LED Street lamp each
All-in -One with in built SCC system wattage of 30W of make Crompton
Greaves ltd code no. CSADEMP25/30CDL,140 Lumen/Watt high
efficiency crystaline solar SPV panel and G.I. Tubular/Octagonal pole of
6 mt high including connection and muffing in RCC 1:3:6(1 cemt: 3
c/sand: 6 stone aggrt of 40 mm n/size) including centering, shutturing,
earth work etc. as reqd.
Boq Qnty TOTAL
Boq BASIC Boq Amount as
as per AMOUNT
Quantity RATE per Parker
Parker Without Taxes
-
-
28.14 39.40 157.000 4,417.98 6,185.46
11,575,527.71 12,219,866.66
DETAILS OF MEASUREMENT(NURSERY 1&2)
Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation e
exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead
2 1.5m.
P/L cement concrete in foundation and plinth excluding the cost of centering and shutter
3 Kanhaighat coarse sand:: 8 graded stone aggrt. 40mm nominal size).
Providing and laying in position specified grade of reinforced cement concrete, excluding
shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1:2 (1 cement :1
sand:2 graded stone aggregate 20 mm nominal size.)
Providing form work i/c centering & shuttering so as to give a rough finish strutting and p
propping and centering below supporting floor to ceiling not exceeding 4m and removal
reinforced concrete to and plain concrete work in.(using 12mm shuttering ply)(a) Founda
columns etc. and mass concrete.
0.00
0.00
TOTAL 0.00
cost of centering and shuttering : - (a) 1:4:8 (1 cem :4
nal size).
0.15 22.84
0.15 10.42
0.15 2.20
0.10 7.61
0.10 3.47
0.15 2.20
0.30 12.08
0.15 6.04
0.450 45.36
TOTAL 112.22
ng,hoisting,fixing in position & In gratings,framed
ing a priming coat of red lead paints. (h) In gratings,
ks
Total
length Unit Wt Total Wt
0.29 51.63
0.29 54.73
0.29 10.14
0.29 35.70
0.29 19.03
0.29 19.03
TOTAL 190.25
0.08
2.13 53.676
BAR BENDING SCHEDU
Dia of No of No of
SI No Description / Particulars Spacing Shape of bar
bar item bars
AR BENDING SCHEDULE-(NURSERY FARM)
Lap/
length Devlopme 0.394
Total No Cutting Total
of bars nt length length length
A B C D E 8MM
Total= 152.18
Total= 423.45
3.04878
1.829268
0.615 0.886 1.575
- 86.28 -
a b c
60.92 - -
124.06 - -
- - -
683 Filling available excavated earth (excluding rock) in trenches, plinth sides m3 10.62 13.23 164.000 1,741.68 2,170.00
of foundation etc. in layers not exceeding 20cm in depth consolidating
each deposited layer by ramming & watering lead upto 50m and lift upto
1.5m.
684 Providing, laying naturally occurred sand gravel Grade -III free from m3 61.14 76.18 1385.000 84,678.90 105,503.59
organic or other deleterious constituants including watering
ramming,consolidating in layers not exceeding 150mm (Spread
thickness)and dressing etc. complete as directed by the Engineer-in-
charge
685 SH : CONCRETE WORKS 0 - -
686 P/L cement concrete in foundation and plinth excluding the cost of m3 3.48 4.46 10564.000 36,762.72 47,082.27
centering and shuttering : - (a) 1:4:8 (1 cem :4 Kanhaighat coarse sand::
8 graded stone aggrt. 40mm nominal size).
689 RCC work in in walls (any thickness), including attached pilasters, m3 3.43 7.04 17656.000 60,560.08 124,367.14
buttresses, plinth and string ourses,fillets,columns, pillars, piers,abutment,
posts and struts etc. upto floor five level excluding the cost of centering,
shuttering ,finishing and reinforcement (a) 1:1:2 (1 cement : 1 Kanhaighat
coarse sand: : 2 graded stone aggrt. 20mm nominal size).
690 Reinforcement for R.C.C.work including bending,binding and placing in Kg 2654.76 923.92 159.000 422,106.84 146,903.87
position complete
(b) TMT bars.
691 FORM WORKS 0 - -
692 Providing form work i/c centering & shuttering so as to give a rough finish m2 42.03 111.97 1034.000 43,459.02 115,776.57
strutting and propping etc. height of propping and centering below
supporting floor to ceiling not exceeding 4m and removal of the same for
insitu reinforced concrete to and plain concrete work in.(using 12mm
shuttering ply)(a) Foundation footings, bases of columns etc. and mass
concrete.
693 (b) Columns, pillars, posts and struts (square, rectangular or polygon in m2 43.89 74.15 1250.000 54,862.50 92,682.93
plan).
697 Steel work in built up (square & hollow section) trusses including cutting, kg 2643.08 2834.84 231.000 610,551.48 654,848.27
hoisting, fixing in position and applying a coat of approved steel primer
red oxide chrom primer conforming to IS 2079, welded and bolted
incluiding special shape washer etc. complete.
698 Providing & fixing of Metal Shingles panel for roofing characterised with m2 30.83 49.07 3710.000 114,379.30 182,045.25
ASTM class A fire rating,with wind resistance in corporating with IECC
solar reflectance index with minimum vapor permeance of 15 under high
temperature along with compatible metal fasteners
699 Providing & fixing 19 mm thick cement fibre board for cushion of roofing m2 30.83 49.07 2328.000 71,772.24 114,232.17
as per approved design
700 Trapzoidal Pre-painted Profile Sheet for Ridges, Gutter or valley 610 mm Rm 11.51 11.51 333.000 3,832.83 3,832.83
wide of approved brand DYNA Roof or equivalent fixed with selt drilling
screws of 68 mm long Xylon coated screw with PVC washer & cap
complete excluding the coat of purlins rafter & trusses.a) Pre painted
alvalume sheet(PPGL) i) Sheet 0.50mm/4.2 kgs/sqm
701 Providing and fixing steel gate by using 50x50x3 mm sqm bar as as main m2 18.67 25.10 8059.000 150,461.53 202,254.05
bars horizontally and 25x25mm solid square bar vertically and 25x 8 mm
as decorative bar readily available at market i/c priming , painting etc
completed as per direction of Engineer -in-charge.
2,466,055.41 2,901,632.79
Details of Measurement (Main Gate 2Nos)
Width Height
SI No Item Description Unit Nos Length (m) Qnty Remarks
(m) (m)
Earth work in excavation in foundation trenches or drains i/c dressing of sides and ramming of
bottoms,including getting out the excavated soil and disposal of surplus excavated soil as directed within a
lead to 50 m.in Hard dense soil. (a) Lift above 1.5 m
Providing & fixing 19 mm thick cement fibre board for cushion of roofing as per approved design
Providing and fixing steel gate by using 50x50x3 mm sqm bar as as main bars horizontally and
25x25mm solid square bar vertically and 25x 8 mm as decorative bar readily available at market
i/c priming , painting etc completed as per direction of Engineer -in-charge.
a e c
column master ring 8 0.125 2 15 30 0.26 0.26 0.26 0.26 0.15 1.190 35.7 14.06 - - - - -
d
4
Column upto Plinth C2 - - - - - -
Column - - - - - -
BAR BENDING SCHEDULE-(MAIN GATE)
Lap/
length Devlopme 0.394 0.615 0.886 1.575 2.462 3.846
Dia of No of No of Total No Cutting Total
SI No Description / Particulars bar Spacing Shape of bar item bars of bars nt length length length
A B C D E 8MM 10MM 12MM 16MM 20MM 25MM
721 Filling available excavated earth (excluding rock) in trenches, plinth sides m3
of foundation etc. in layers not exceeding 20cm in depth consolidating
each deposited layer by ramming & watering lead upto 50m and lift upto
1.5m.
724 (b) 1:2:4 (1 cem :2 Kanhaighat coarse sand::4 graded stone aggrt.20mm m3
n/size).
732 (g) Vertical surface such as walls (any thickness), partition and the like m2
including attached pilasters, buttresses, plinth and the string courses
and the like
734 Providing and fixing stailess steel (Grade 304) railing made of hollow Rm
tubes, channels, plates & fitting the same with necessary stainless steel
nuts and bolts complete, i/c fixing the railing with necessary accessories
and stainless steel dash fashner, stainless steel bolts etc. of required
size, on the top of the floor to the side of waist slab with suitable
arrangement approval of Engineer-in-charge, (for payment purpose only
weight of stainless steel member shall be consider excluding fixing
accessories such as nuts, bolts, fastners etc.
735 Providing and applying plaster of paris putty of 2mm thickness over m2
plastered surface to prepare the surface even and smooth complete.
736 Applying one coat of cement primer of approved quality on wall surface. m2
737 Finishing wall weather shield paint of approved quality on new work (three m2
or more coats) to give an even shade.
Boq Qnty TOTAL
Boq BASIC Boq Amount as
as per AMOUNT
Quantity RATE per Parker
Parker Without Taxes
0 - -
215.20 121.25 10564.000 2,273,372.80 1,280,853.15
0 - -
844.03 604.25 16544.000 13,963,632.32 9,996,666.81
0 - -
1396.33 93.70 1034.000 1,443,805.22 96,887.34
247.35 1250.000 309,187.50 -
93,739,164.77 62,408,298.26
Details of Measurement
SI No Item Description Unit Nos Length (m) Width (m) Height (m) Qnty
Earth work in excavation in foundation trenches or drains i/c dressing of sides and ramming of bottoms,including getting out the
excavated soil and disposal of surplus excavated soil as directed within a lead to 50 m.in Hard dense soil. (a) Lift above 1.5 m
Retaining Wall Nursery Location 1 3.66m Cum 1 140.00 1.93 2.130 575.53
Retaining Wall Nursery Location 2 3.66m Cum 1 27.31 1.93 2.130 112.27
Retaining Wall RCC Steps 3.66m Cum 1 274.39 1.93 2.130 1127.99
Total= 1815.79
P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering : - (a) 1:4:8 (1 cem :4 Kanhaighat coarse
sand:: 8 graded stone aggrt. 40mm nominal size).
Retaining Wall Nursery Location 1 3.66m Cum 1 140.00 1.830 0.150 38.43
Retaining Wall Nursery Location 2 3.66m Cum 1 27.31 1.830 0.150 7.50
Retaining Wall RCC Steps 3.66m Cum 1 274.39 1.830 0.150 75.32
Total= 121.25
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and
reinforcement - All work up to plinth level : (a)1:1:2 (1 cement :1 Kanhaighat coarse sand:2 graded stone aggregate 20 mm nominal
size.)
Retaining Wall Nursery Raft-Location 1 3.66m Cum 1 140.00 1.52 0.90 191.52
Retaining Wall Nursery Raft-Location 2 3.66m Cum 1 27.31 1.52 0.90 37.36
Retaining Wall RCC Steps 3.66m Cum 1 274.39 1.52 0.90 375.37
Total= 604.25
RCC work in in walls (any thickness), including attached pilasters, buttresses, plinth and string ourses,fillets,columns, pillars,
piers,abutment, posts and struts etc. upto floor five level excluding the cost of centering, shuttering ,finishing and reinforcement
(a) 1:1:2 (1 cement : 1 Kanhaighat coarse sand: : 2 graded stone aggrt. 20mm nominal size).
Retaining Wall Nursery RCC-Location 1 3.66m Cum 1 140.00 0.91 4.74 603.88
Retaining Wall Nursery Raft-Location 2 3.66m Cum 1 27.31 0.91 4.74 117.80
Retaining Wall Nursery Raft-Location 2 3.66m top
Cum 1 123.72 0.20 0.20 4.95
beam
Retaining Wall RCC Steps 3.66m Cum 1 274.39 0.91 4.74 1183.55
Total= 1910.18
Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering
below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain concrete work
in.(using 12mm shuttering ply)(a) Foundation footings, bases of columns etc. and mass concrete.
m :4 Kanhaighat coarse
illets,columns, pillars,
shing and reinforcement
Footing 13.91667
a b c
Bar in Bottom Near Nursery farm
1 12 0.15 c 14 10 140 0.800 11.900 0.800 0.5 14.000 1960 - - 1736.86 - -
Location 1 & 2 3.66m a
6 Bar in Top for RCC Steps 3.66m 12 0.15 14 10 140 0.800 11.900 0.800 0.5 14.000 1960 - - 1736.86 - -
a b c
7 Bar in bottom for RCC Steps 3.66m 12 0.15 14 80 1120 0.800 1.420 0.800 3.020 3382.4 - - 2997.33 - -
a b c
8 Bar in Top for RCC Steps 3.66m 12 0.15 c 14 80 1120 0.800 1.420 0.800 3.020 3382.4 - - 2997.33 - -
a b
c
Horizontal Bar 12 1 4 4 282.100 0.600 282.700 1130.8 - - 1002.06 - -
d
Striup Bar 8 0.15 a c 1 2177 2177 0.300 0.150 0.300 0.150 0.150 1.050 2285.85 900.27 - - - -
SH-M:Construction of Monument
SH : EARTH WORK
Earth work in excavation in foundation trenches or drains i/c dressing of m3
sides and ramming of bottoms,including getting out the excavated soil
and disposal of surplus excavated soil as directed within a lead to 50 m.in
Hard dense soil. (a) Lift above 1.5 m
Providing, laying naturally occurred sand gravel Grade -III free from m3
organic or other deleterious constituants including watering
ramming,consolidating in layers not exceeding 150mm (Spread
thickness)and dressing etc. complete as directed by the Engineer-in-
charge
SH : CONCRETE WORKS
P/L cement concrete in foundation and plinth excluding the cost of m3
centering and shuttering : - (a) 1:4:8 (1 cem :4 Kanhaighat coarse sand::
8 graded stone aggrt. 40mm nominal size).
SH : R.C.C. WORKS
Providing and laying in position specified grade of reinforced cement m3
concrete, excluding the cost of centering, shuttering, finishing and
reinforcement - All work up to plinth level : (a)1:1:2 (1 cement :1
Kanhaighat coarse sand:2 graded stone aggregate 20 mm nominal size.)
BRICKS WORKS
2nd class (local first class) brick work in foundation and plinth in cement m3
mortar 1: 4 (1 Cem:4 kanhaighat C/Sand)
TOTAL
Boq Boq Qnty as BASIC Boq Amount as
AMOUNT
Quantity per Parker RATE per Parker
Without Taxes
0 - -
1.06 10564.000 - 11,224.04
0 - -
3.73 16544.000 - 61,658.56
0 - -
11.11 1034.000 - 11,490.01
0 - -
16987.000 - -
- 296,255.35
Details of Measurement(MONUMENT)
Length Width Height
SI No Item Description Unit Nos
(m) (m) (m)
Earth work in excavation in foundation trenches or drains i/c dressing of sides and ramming of
bottoms,including getting out the excavated soil and disposal of surplus excavated soil as directed with
to 50 m.in Hard dense soil. (a) Lift above 1.5 m
and ramming of
ated soil as directed within a lead
11.90
11.90
nd shuttering : - (a) 1:4:8 (1
1.06
1.06
excluding the cost of centering,
1 cement :1 Kanhaighat coarse
2.22
1.50
3.73
linth and string
five level excluding the cost of
aighat coarse sand: : 2 graded
0.381098
3.13
3.13
tting and propping etc. height of
d removal of the same for insitu
(a) Foundation footings, bases of
1.61
3.82
5.69
11.11
14.63
14.63
BAR BENDING SC
Dia of No of No of Total No
SI No Description / Particulars Spacing Shape of bar
bar item bars of bars
RCC FOOTING
Top Bar y-y 12 0.15 a c 2 27 54
b
b
Bottom Bar y-y 12 0.15 c 2 37 74
a b
Column
column bar-A 16 A 1 37 37
1 0.15
b
column bar-B 8 a e Ac 1 37 37
2 0.15 d
b
a e c
column master ring 8 1 37 37
d
3 0.15
a e c
column master ring 8 1 37 37
d
4 0.15
BAR BENDING SCHEDULE-(MONUMENT)
Lap/
length Devlopme 0.394 0.615
Cutting Total
nt length length length
A B C D E 8MM 10MM
- -
155.04 - - -
165.91 - - -
- - - -
- 386.46 - -
- - - -
- - - -
- - - -
0 0.000 0.00
250.1323 10564.000 3295862.360 2642397.90
0 0.000 0.00
540.0871 16544.000 4424196.480 8935201.33
0 0.000 0.00
1118.832 1034.000 364588.400 1156872.62
3628.497 1256.000 3035337.520 4557392.01
19,007,634.83 65,540,876.42
Details of Measurement(PLANTER BOX)
P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering : - (a) 1:4
Kanhaighat coarse sand:: 8 graded stone aggrt. 40mm nominal size).
Planter Box Retaining wall near museum From souvenir Cum 1 187.65
shop to watch tower 615'5" as per drawing
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of c
shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1:2 (1 cement :1 Kanhaighat
graded stone aggregate 20 mm nominal size.)
Planter Box near museum Cum 1 187.65
Planter Box Near main gate Cum 1 61.55
Planter Box Near main gate Cum 1 32.90
Wheel Guard Cum 1 282.10
Water Body & Planter Box Excavation Work
Raft Side 1 Cum 1 25.25
Raft Cum 1 26.9
Wall 1 Cum 1 24.65
Wall 2 Cum 1 24.70
Wall 3 Cum 1 16.30
Wall 4 Cum 1 3.55
Wall 5 Cum 1 1.57
Wall 6 Cum 1 1.76
Raft Side 2 Cum 1 27.2
Raft Cum 1 26.9
Wall 1 Cum 1 26.3
Wall 2 Cum 1 26.3
Wall 3 Cum 1 16.3
Wall 4 Cum 1 3.55
Wall 5 Cum 1 1.57
Wall 6 Cum 1 1.76
Planter Box Near Souvenir shop Raft Cum 1 45.12
Planter Box Around Play Ground Raft Cum 1 170.47
Planter Box in front of Olympic ring Raft Cum 1 20.98
Planter Box In General Parking Area Cum 2 334.79
Planter Box In General Parking Area Cum 1 34.02
RCC work in in walls (any thickness), including attached pilasters, buttresses, plinth and string ourses,
pillars, piers,abutment, posts and struts etc. upto floor five level excluding the cost of centering, shutt
reinforcement (a) 1:1:2 (1 cement : 1 Kanhaighat coarse sand: : 2 graded stone aggrt. 20mm nominal
Cum
Planter Box Near main gate Cum 1 61.55
Planter Box Near main gate Cum 1 32.90
Wall 1 Cum 1 24.65
Wall 2 Cum 1 24.70
Wall 3 Cum 1 16.30
Wall 4 Cum 1 3.55
Wall 5 Cum 1 1.57
Wall 6 Cum 1 1.76
Wall 1 Cum 1 26.3
Wall 2 Cum 1 26.3
Wall 3 Cum 1 16.3
Wall 4 Cum 1 3.55
Wall 5 Cum 1 1.57
Wall 6 Cum 1 1.76
Planter Box Near Souvenir shop Cum 1 45.12
Planter Box Near Souvenir shop Cum 1 45.12
Planter Box Around Play Ground Cum 1 170.47
Planter Box Around Play Ground Cum 1 170.47
Planter Box in front of Olympic ring Cum 1 20.98
Planter Box in front of Olympic ring Cum 1 20.98
Planter Box In General Parking Area Cum 2 334.79
Planter Box In General Parking Area Cum 2 334.79
Planter Box In General Parking Area Cum 1 34.02
Planter Box In General Parking Area Cum 1 34.02
Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc.
and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu
to and plain concrete work in.(using 12mm shuttering ply)(a) Foundation footings, bases of columns e
concrete.
(g) Vertical surface such as walls (any thickness), partition and the like including attached pilaste
plinth and the string courses and the like
Granite stone slab flooring over 20 mm (average) thick base of cement mortar 1 : 6 (1 Cement: 6
sand:) laid and jointed with grey cement slurry including rubbing and polishing complete with -(a
mm slab thick (i)Jade Black 60 x 120 cm
Planter Box near museum Sqm 2 187.65
Planter Box Near main gate Sqm 2 61.55
Planter Box Near main gate Sqm 2 32.90
Wheel Guard Sqm 2 282.10
Water Body & Planter Box Excavation Work Sqm
Raft Side 1 Sqm 2 25.25
Raft Sqm 2 26.9
Wall 1 Sqm 2 24.65
Wall 2 Sqm 2 24.70
Wall 3 Sqm 2 16.30
Wall 4 Sqm 2 3.55
Wall 5 Sqm 2 1.57
Wall 6 Sqm 2 1.76
Raft Side 2 Sqm 2 27.2
Raft Sqm 2 26.9
Wall 1 Sqm 2 26.3
Wall 2 Sqm 2 26.3
Wall 3 Sqm 2 16.3
Wall 4 Sqm 2 3.55
Wall 5 Sqm 2 1.57
Wall 6 Sqm 2 1.76
Planter Box Near Souvenir shop Raft Sqm 2 45.12
Planter Box Around Play Ground Raft Sqm 2 170.47
Planter Box in front of Olympic ring Raft Sqm 2 20.98
Planter Box In General Parking Area Sqm 4 334.79
Planter Box In General Parking Area Sqm 2 34.02
ER BOX)
Width Height Qnty Remarks
(m) (m)
f sides and ramming of bottoms,including getting
within a lead to 50 m.in Hard dense soil. (a) Lift
Area of
1.02 191.40 trapezium
*L of wall
0.150 56.30
0.300 112.59
0.150 18.47
0.150 9.87
0.300 36.93
0.150 8.78
0.150 9.27
0.300 17.28
0.300 18.27
0.300 18.54
0.300 18.27
0.300 14.79
0.300 14.82
0.300 9.78
0.300 2.13
0.300 0.94
0.300 1.06
0.300 15.78
0.300 15.78
0.300 9.78
0.300 2.13
0.300 0.94
0.300 1.06
0.150 13.90
0.150 51.50
0.150 6.66
0.150 200.87
0.300 401.75
0.150 10.21
0.300 20.41
Total 1118.83
ke including attached pilasters, buttresses,
0.91463 343.26
0.91463 112.59
0.91463 60.18
0.91463 516.04
0.91463 46.19
0.91463 49.21
0.91463 45.09
0.91463 45.18
0.91463 29.82
0.91463 6.49
0.91463 2.87
0.91463 3.22
0.91463 49.76
0.91463 49.21
0.91463 48.11
0.91463 48.11
0.91463 29.82
0.91463 6.49
0.91463 2.87
0.91463 3.22
0.91463 82.54
0.91463 311.84
0.91463 38.39
0.91463 1224.84
0.91463 62.23
3217.57
BAR BENDING SCHEDULE-(W
Dia of No of No of Total No
SI No Description / Particulars Spacing Shape of bar
bar item bars of bars
RCC FOOTING
Bar in Bottom Near
1 museum, care taker , main 10 0.15 a b c 1 1881 1881
gate
RAFT 10 0.15 c 1 169 169
a b
b
DISTRIBUTION 10 0.15 1 23 23
a b c
Planter Box Near Souvenir
shop Main Bar in bottom
10 0.15 4 7 26
12m Typical Portion a b c
considered
Planter Box Near Souvenir
shop Distribution Bar in
10 0.15 4 81 305
bottom 12m Typical a b c
Portion considered
Planter Box Around Play
Ground Main Bar in
10 0.15 14 7 99
bottom 12m Typical a b c
Portion considered
Planter Box Around Play
Ground Distribution Bar in
10 0.15 14 81 1151
bottom 12m Typical a b c
Portion considered
Planter Box in front of
Olympic ring Main Bar in
10 0.15 2 7 12
bottom 12m Typical a b c
Portion considered
Planter Box in front of
Olympic ring Distribution
10 0.15 2 81 142
Bar in bottom 12m Typical a b c
Portion considered
Planter Cum Retaining
Wall Near Museam,
caretaker& Main gate
d
Bar in wall 12 0.15 c 1 1882 1882
e a
b
b
Bar in wall 10 0.15 1 1882 1882
b
0.4
0.4 0.4
Outer vertical Distribution 10 1 9 9
24.550
0.05
Inner vertical 10 1.19
1 199 199
0.4
0.05 24.550 0.05
Inner vertical Distribution 10 1 9 9
0.17
Inner vertical 10 1 166 166
1.19
0.4
0.17 0.17
Inner vertical Distribution 10 1 9 9
24.700
0.17
Outer vertical 10 1.19
1 166 166
0.4
0.17 0.17
Outer vertical Distribution 10 1 9 9
24.550
0.17
Inner vertical 10 0.87 1 121 121
0.4
0.17 0.17
Inner vertical Distribution 10 1 7 7
16.200
0.17
Outer vertical 10 1 121 121
0.87
0.4
0.17 0.17
Outer vertical Distribution 10 1 7 7
16.200
RAFT
0.1 0.1
Distribution (T&B) 10 1 46 46
26.150
Wall 1
0.05
Outer vertical 10 1 199 199
1.19
0.4
0.4 0.4
Outer vertical Distribution 10 1 9 9
26.150
0.05
Inner vertical 10 1.19
1 199 199
0.4
0.05 26.150 0.05
Inner vertical Distribution 10 1 9 9
Wall 2
0.17
Inner vertical 10 1 166 166
1.19
0.4
0.17 0.17
Inner vertical Distribution 10 1 9 9
26.150
0.17
Outer vertical 10 1.19
1 166 166
0.4
0.17 0.17
Outer vertical Distribution 10 1 9 9
26.150
Wall 3
0.17
Inner vertical 10 0.87 1 121 121
0.4
0.17 0.17
Inner vertical Distribution 10 1 7 7
16.200
0.17
Outer vertical 10 1 121 121
0.87
0.4
0.17
Outer vertical Distribution 10 0.17 1 7 7
16.200
- -
- -
- -
0 - -
0.000 0 - -
0.000 0 - -
0.000 0 - -
0.000 0 - -
0.4 0.87 0.17 1.440 174.24 - 107.22
1.18
148.01
0.886 1.575 2.462
- - -
- - -
- - -
- - -
- - -
.
0 A
- - - 5
- - -
- - -
- - -
- - -
- - -
- - -
- - -
2.12
3835.81 - -
- - -
- - -
9.7344
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
a d c c
- - -
- - -
- - -
- - -
- - -
- - -
0.855
- - -
- - -
0.725
- - -
- - -
0.125
- - -
- - -
0.855
.5
- - -
- - -
0.725
- - -
- - -
0.125
- - -
- - -
0.855
.5
- - -
- - -
0.725
- - -
- - -
0.125
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
899 Filling available excavated earth (excluding rock) in trenches, plinth sides 4.87
of foundation etc. in layers not exceeding 20cm in depth consolidating
each deposited layer by ramming & watering lead upto 50m and lift upto
1.5m.
4.87
900 SH : CONCRETE WORKS 0
901 P/L cement concrete in foundation and plinth excluding the cost of 1.53
centering and shuttering : - (a) 1:4:8 (1 cem :4 Kanhaighat coarse sand::
8 graded stone aggrt. 40mm nominal size).
1.53
902 (b) 1:2:4 (1 cem :2 Kanhaighat coarse sand::4 graded stone aggrt.20mm 0.43
n/size).
0.43
903 SH : R.C.C. WORKS
904 Providing and laying in position specified grade of reinforced cement 2.45
concrete, excluding the cost of centering, shuttering, finishing and
reinforcement - All work up to plinth level : (a)1:1:2 (1 cement :1
Kanhaighat coarse sand:2 graded stone aggregate 20 mm nominal size.)
2.45
905 RCC work in in walls (any thickness), including attached pilasters, 0.93
buttresses, plinth and string ourses,fillets,columns, pillars,
piers,abutment, posts and struts etc. upto floor five level excluding the
cost of centering, shuttering ,finishing and reinforcement (a) 1:1:2 (1
cement : 1 Kanhaighat coarse sand: : 2 graded stone aggrt. 20mm
nominal size).
0.93
906 RCC work in beams, suspended floors, roofs having slope upto 15 1.98
degree landings, balconies,shelves,chajjas, lintels,bands,plain window
sill,staircases and spiral staircase upto floor five level but excluding the
cost of centering, shuttering ,finishing and reinforcement (a) 1:1:2 (1
cement : 1 Kanhaighat coarse sand: : 2 graded stone aggrt. 20mm
nominal size).
1.98
907 Reinforcement for R.C.C.work including bending,binding and placing in 717.81
position complete
(b) TMT bars. 717.81
908 FORM WORKS
909 Providing form work i/c centering & shuttering so as to give a rough finish 10.60
strutting and propping etc. height of propping and centering below
supporting floor to ceiling not exceeding 4m and removal of the same for
insitu reinforced concrete to and plain concrete work in.(using 12mm
shuttering ply)(a) Foundation footings, bases of columns etc. and mass
concrete.
10.60
910 (b) Columns, pillars, posts and struts (square, rectangular or polygon in 13.47
plan).
13.47
911 (c) Sides & soffits of beams, beam haunchings, cantilevers, girders, 5.48
bressummers and lintels not exceeding 1m in depth.
5.48
912 ( d)Flat surface such as suspended floor,roofs,landing & the like ( i) floor 9.85
etc upto 200mm in thickness 9.85
913 (e)Edges of slab and breaks in floors and walls (i) Under 20cm wide 4.63
4.63
914 BRICKS WORKS
915 2nd class (local first class) brick work in foundation and plinth in cement 1.37
mortar 1: 4 (1 Cem:4 kanhaighat C/Sand) 1.37
916 Half brick masonry 2nd class (local first class) in cement mortar 1:4 (1 5.72
cement : 4 kanhaighat coarse sand) in superstructure above plinth.
5.72
917 Providing wood work in frames of doors, windows, clerestory windows 0.07
and other frames wrought framed and fixed in position (b) Local best
quality Teak Wood
918 Providing and fixing 38mm thick panelled and glazed or panelled and 1.60
glazed shutters for doors, windows, c/windows ect. Including bright
finished brass hinges with necessary screws-(a) Local best quality teak
wood.
919 Providing 40x3mm flat iron hold fast 40cm long i/c fixing to frames with 6.00
10mm dia bolts, nuts and wooden plugs and embedding to cement
concrete block 30x10x15cm 1:3:6 (1 cement : 3 coarsesand : 6 stone
aggrt. 20mm nominal guage).
920 Providing & fixing bright finished brass 100 mm door mortice latch with 1.00
one dead bolt & a pair of levers handles with necessary screws etc.
complete (Indian make of approved quality).
921 Providing and fixing Brass sliding bolts bright finished or black enamelled 1.00
with nuts & screws etc. complete.(a) 300X16 mm
922 Providing & fixing Brass Tower bolts (barrel type) with screws etc. 2.00
complete (b) 100x10 mm
923 Providing & fixing Brass handles with necessary screws etc. complete. 2.00
(a)125mm
924 Providing and fixing aluminium works for doors windows ventilators and 1.56
partions worth extruded builts up standard tubular section /appropriate Z
sections and other section of approved make conforming to IS 733 and
IS 1285 fixed with expansion hold fasteners including necessary filling up
gap at junction at top bottom and side with required EPDM
rubber/Neoprene gasket etc Aluminium snap beading for glazing
/panelling C P brass/stainless steel screws all complete as per
archectural drawing and the direction of engineer in charge(glazing and
panelling to be paid for separately 10.66.1 Anodised aluminium
( anodised transparent or dyed to required shade according to IS:1868,
Minimum anodic coating of grade AC 15 )
925 Providing and fixing glazing in aluminium door , windows , ventilator 1.56
shutter and partition etc with EPDM rudder / neoprene gasket etc
complete as per the architectural drawing and the directions of engineer
in charge ( Cost of aluminium snap beading shall be paid in basic item ):
With plain glass panes of 4 mm thickness
926 Providing and laying vitrified tiles in different sizes (thickness 8 mm thick) 3.05
with water absorption less than 0.08% and conforming to IS 15622,of
approved make ,in all colours & shades laid on 20mm thick cement
mortar 1:4 (1 cem : 4 c/sand),i/c routing the joints with white cement &
matching pigments etc,complete
(i)size of tile-600x600mm (Double charged)branded
927 Providing and laying vitrified tiles in different sizes (thickness 8 mm thick) 1.57
with water absorption less than 0.08% and conforming to IS 15622,of
approved brand and manufacturer ,in all colours & shades,in
skirting ,riser of steps laid with cement based high polymer modified
quick set tile adhesive.(i)size of tile-600x600mm (Double
charged)branded
928 Granite stone slab flooring over 20 mm (average) thick base of cement 0.76
mortar 1 : 6 (1 Cement: 6 Kanhaighat coarse sand:) laid and jointed with
grey cement slurry including rubbing and polishing complete with -(a)
Granite slab 20 mm slab thick (i)Jade Black 60 x 120 cm
0.57
929 Providing and laying pressed clay tiles (as per approved pattern 20 mm 9.27
nominal thickness of approved size) on roofs jointed with cement mortar
1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing
compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement :
4 coarse sand) and finished neat complete.
930 SH : FINISHING
931 12mm cement plaster 1:4 (1 cement : 4 Kanhaighat coarse sand:). 5.72
5.72
932 15mm cement plaster 1:4 (1 cement : 4 Kanhaighat coarse sand:). 5.72
5.72
933 Applying one coat of cement primer of approved quality on wall surface. 34.20
934 Providing and applying wall putty/plaster of paris putty of 2 mm thickness 34.20
over plaster surface to prepared the surface even and smooth complete.
935 Finishing walls weather shield paint of approved quality on new work 34.20
( three or more coats ) to give an even shade.
936 Varnishing (two or more coats) with superior Copal varnish of approved 4.10
quality i/c sizing on new work.
955 SITC surface mounted LED Down Lighter with white powder coated Al. 1.00
housing with integrated electronic driver 15 W 840 LHEAAGP6IA2W012
complete with connection as rqd. (Havell's)
956 S/F 300 mm dia wall mounting fan complete with all accessories as reqd. 1.00
957 SITC 50W LED 5000K energy saving IP 65 Flood Light luminaries with 1.00
high power LED as light source Havell's JETACOMPECTOFL50W LED
757LTG complete with connection as rqd. (Havell's)
958 S/F (following way) single/double pole and nuetral, sheet steel MCCB 1.00
distributuion board, 240V on surface/recessed complete with tinned
copper bus bar neutral bus bar, earth bar,din bar detachable gland plate,
interconnection, phosphatized and powder painted i/c earthing etc as
reqd (but without MCB/RCCB/Isolator) (a) 4 way single door
959 S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and
other load of (following poles) in the existing MCB DB complete
with connection testing and commissioning etc.as reqd. (a) Single
pole
0 0.000
m3 157.000 2295.340 2295.34
0 0.000 0.00
m3 10564.000 16162.920 16162.92
0 0.000 0.00
m3 16544.000 40532.800 40532.80
0 0.000 0.00
m2 1034.000 10960.400 10960.40
0 0.000 0.00
m3 16987.000 23272.190 23272.19
0 0.000 0.00
m2 327.000 1870.440 1870.44
m2 370.000 2116.400 2116.40
0 0.000 0.00
0 0.000 0.00
0 0.000 0.00
0 0.000 0.00
329539.77
Details of Measurement(SECURITY BOOTH)
Length Width Height
SI No Item Description Unit Nos Qnty
(m) (m) (m)
Earth work in excavation in foundation trenches or drains i/c dressing of sides and ramming of
bottoms,including getting out the excavated soil and disposal of surplus excavated soil as directed
within a lead to 50 m.in Hard dense soil. (a) Lift above 1.5 m
Total #REF!
P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering : - (a)
1:4:8 (1 cem :4 Kanhaighat coarse sand:: 8 graded stone aggrt. 40mm nominal size).
Total #REF!
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of
centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1:2 (1 cement :1
Kanhaighat coarse sand:2 graded stone aggregate 20 mm nominal size.)
Total #REF!
RCC work in in walls (any thickness), including attached pilasters, buttresses, plinth and string
ourses,fillets,columns, pillars, piers,abutment, posts and struts etc. upto floor five level excluding
the cost of centering, shuttering ,finishing and reinforcement (a) 1:1:2 (1 cement : 1 Kanhaighat
coarse sand: : 2 graded stone aggrt. 20mm nominal size).
Total #REF!
Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping
etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and
removal of the same for insitu reinforced concrete to and plain concrete work in.(using 12mm
shuttering ply)(a) Foundation footings, bases of columns etc. and mass concrete.
Total #REF!
(g) Vertical surface such as walls (any thickness), partition and the like including attached
pilasters, buttresses, plinth and the string courses and the like
Total #REF!
Remarks
nd ramming of
ted soil as directed
nd shuttering : - (a)
ize).
0.381098
uding attached
Sl. Boq
Item Description
No. Quantity
1006 Banking excavated earth in layer not exceeding 20 cn in depth , breaking 558.15
clods , watering , rolling each layer with 1/2 tonne roller or wooden or
steel rammer and rolling every third and top most layer with power roller
of minimum 8 tonne and dressing up in embankment for roads marginal
banks flood banks and guide bank lead upto 50 metres and lift upto 1.5
metre (a) Hard / dense soil
TOTAL
Execution Work done
Units Basic rate AMOUNT
Qnty Amount
Without Taxes
0 0.000
0 0.000
10631.90 m3 157.000 870304.380 1669208.3
1,290,033.18 2,468,727.18
10.068839364
Details of Measurement(MONUMENT)
Banking excavated earth in layer not exceeding 20 cn in depth , breaking clods , watering , rolling each layer w
tonne roller or wooden or steel rammer and rolling every third and top most layer with power roller of minim
and dressing up in embankment for roads marginal banks flood banks and guide bank lead upto 50 metres an
metre (a) Hard / dense soil
Cum 1 10631.9 0.1
Total
T)
Qnty Remarks
826 Filling available excavated earth (excluding rock) in trenches, plinth sides 4.87 4.87
of foundation etc. in layers not exceeding 20cm in depth consolidating
each deposited layer by ramming & watering lead upto 50m and lift upto
1.5m.
829 (b) 1:2:4 (1 cem :2 Kanhaighat coarse sand::4 graded stone aggrt.20mm 0.43 0.43
n/size).
832 RCC work in in walls (any thickness), including attached pilasters, 0.93 0.93
buttresses, plinth and string ourses,fillets,columns, pillars,
piers,abutment, posts and struts etc. upto floor five level excluding the
cost of centering, shuttering ,finishing and reinforcement (a) 1:1:2 (1
cement : 1 Kanhaighat coarse sand: : 2 graded stone aggrt. 20mm
nominal size).
833 RCC work in beams, suspended floors, roofs having slope upto 15 2.08 2.08
degree landings, balconies,shelves,chajjas, lintels,bands,plain window
sill,staircases and spiral staircase upto floor five level but excluding the
cost of centering, shuttering ,finishing and reinforcement (a) 1:1:2 (1
cement : 1 Kanhaighat coarse sand: : 2 graded stone aggrt. 20mm
nominal size).
834 Reinforcement for R.C.C.work including bending,binding and placing in 742.09
position complete
(b) TMT bars.
835 FORM WORKS
836 Providing form work i/c centering & shuttering so as to give a rough finish 10.60 10.60
strutting and propping etc. height of propping and centering below
supporting floor to ceiling not exceeding 4m and removal of the same for
insitu reinforced concrete to and plain concrete work in.(using 12mm
shuttering ply)(a) Foundation footings, bases of columns etc. and mass
concrete.
837 (b) Columns, pillars, posts and struts (square, rectangular or polygon in 13.47 13.47
plan).
838 (c) Sides & soffits of beams, beam haunchings, cantilevers, girders, 5.85 5.85
bressummers and lintels not exceeding 1m in depth.
839 ( d)Flat surface such as suspended floor,roofs,landing & the like ( i) floor 10.31 10.31
etc upto 200mm in thickness
840 (e)Edges of slab and breaks in floors and walls (i) Under 20cm wide 7.94 7.94
844 Providing wood work in frames of doors, windows, clerestory windows 0.07
and other frames wrought framed and fixed in position (b) Local best
quality Teak Wood
845 Providing and fixing 38mm thick panelled and glazed or panelled and 1.60
glazed shutters for doors, windows, c/windows ect. Including bright
finished brass hinges with necessary screws-(a) Local best quality teak
wood.
846 Providing 40x3mm flat iron hold fast 40cm long i/c fixing to frames with 6.00
10mm dia bolts, nuts and wooden plugs and embedding to cement
concrete block 30x10x15cm 1:3:6 (1 cement : 3 coarsesand : 6 stone
aggrt. 20mm nominal guage).
847 Providing & fixing bright finished brass 100 mm door mortice latch with 1.00
one dead bolt & a pair of levers handles with necessary screws etc.
complete (Indian make of approved quality).
848 Providing and fixing Brass sliding bolts bright finished or black enamelled 1.00
with nuts & screws etc. complete.(a) 300X16 mm
849 Providing & fixing Brass Tower bolts (barrel type) with screws etc. 2.00
complete (b) 100x10 mm
850 Providing & fixing Brass handles with necessary screws etc. complete. 2.00
(a)125mm
851 Providing and fixing aluminium works for doors windows ventilators and 1.56
partions worth extruded builts up standard tubular section /appropriate Z
sections and other section of approved make conforming to IS 733 and
IS 1285 fixed with expansion hold fasteners including necessary filling up
gap at junction at top bottom and side with required EPDM
rubber/Neoprene gasket etc Aluminium snap beading for glazing
/panelling C P brass/stainless steel screws all complete as per
archectural drawing and the direction of engineer in charge(glazing and
panelling to be paid for separately 10.66.1 Anodised aluminium
( anodised transparent or dyed to required shade according to IS:1868,
Minimum anodic coating of grade AC 15 )
852 Providing and fixing glazing in aluminium door , windows , ventilator 1.56
shutter and partition etc with EPDM rudder / neoprene gasket etc
complete as per the architectural drawing and the directions of engineer
in charge ( Cost of aluminium snap beading shall be paid in basic item ):
With plain glass panes of 4 mm thickness
853 Providing and laying vitrified tiles in different sizes (thickness 8 mm thick) 3.05
with water absorption less than 0.08% and conforming to IS 15622,of
approved make ,in all colours & shades laid on 20mm thick cement
mortar 1:4 (1 cem : 4 c/sand),i/c routing the joints with white cement &
matching pigments etc,complete
(i)size of tile-600x600mm (Double charged)branded
854 Providing and laying vitrified tiles in different sizes (thickness 8 mm thick) 1.57
with water absorption less than 0.08% and conforming to IS 15622,of
approved brand and manufacturer ,in all colours & shades,in
skirting ,riser of steps laid with cement based high polymer modified
quick set tile adhesive.(i)size of tile-600x600mm (Double
charged)branded
855 Granite stone slab flooring over 20 mm (average) thick base of cement 1.66
mortar 1 : 6 (1 Cement: 6 Kanhaighat coarse sand:) laid and jointed with
grey cement slurry including rubbing and polishing complete with -(a)
Granite slab 20 mm slab thick (i)Jade Black 60 x 120 cm
856 Providing and laying pressed clay tiles (as per approved pattern 20 mm 9.27
nominal thickness of approved size) on roofs jointed with cement mortar
1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing
compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement :
4 coarse sand) and finished neat complete.
857 SH : FINISHING
858 12mm cement plaster 1:4 (1 cement : 4 Kanhaighat coarse sand:). 5.72 5.72
859 15mm cement plaster 1:4 (1 cement : 4 Kanhaighat coarse sand:). 5.72 5.72
860 Applying one coat of cement primer of approved quality on wall surface. 34.20
861 Providing and applying wall putty/plaster of paris putty of 2 mm thickness 34.20
over plaster surface to prepared the surface even and smooth complete.
862 Finishing walls weather shield paint of approved quality on new work 34.20
( three or more coats ) to give an even shade.
863 Varnishing (two or more coats) with superior Copal varnish of approved 4.10
quality i/c sizing on new work.
882 SITC surface mounted LED Down Lighter with white powder coated Al. 1.00
housing with integrated electronic driver 15 W 840 LHEAAGP6IA2W012
complete with connection as rqd. (Havell's)
883 S/F 300 mm dia wall mounting fan complete with all accessories as reqd. 1.00
884 SITC 50W LED 5000K energy saving IP 65 Flood Light luminaries with 1.00
high power LED as light source Havell's JETACOMPECTOFL50W LED
757LTG complete with connection as rqd. (Havell's)
885 S/F (following way) single/double pole and nuetral, sheet steel MCCB 1.00
distributuion board, 240V on surface/recessed complete with tinned
copper bus bar neutral bus bar, earth bar,din bar detachable gland plate,
interconnection, phosphatized and powder painted i/c earthing etc as
reqd (but without MCB/RCCB/Isolator) (a) 4 way single door
886 S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and
other load of (following poles) in the existing MCB DB complete
with connection testing and commissioning etc.as reqd. (a) Single
pole
0 0.000
0 0.000
m3 157.000 2295.340 2295.34
0 0.000 0.00
m3 10564.000 16162.920 16162.92
0 0.000 0.00
m3 16544.000 40532.800 40532.80
0 0.000 0.00
m2 1034.000 10960.400 10960.40
0 0.000 0.00
m3 16987.000 23272.190 23272.19
0 0.000 0.00
m2 327.000 1870.440 1870.44
m2 370.000 2116.400 2116.40
0 0.000 0.00
0 0.000 0.00
0 0.000 0.00
0 0.000 0.00
205321.22
TOTAL
Sl. Boq Execution Work done
Item Description Units Basic rate AMOUNT
No. Quantity Qnty Amount
Without Taxes
619 Filling available excavated earth (excluding rock) in 286.94 563.13 m3 164.000 47,058.16 92352.54
trenches, plinth sides of foundation etc. in layers not
exceeding 20cm in depth consolidating each deposited
layer by ramming & watering lead upto 50m and lift upto
1.5m.
625 RCC work in in walls (any thickness), including attached 18.60 16.86 m3 17656.000 328,401.60 297724.30
pilasters, buttresses, plinth and string
ourses,fillets,columns, pillars, piers,abutment, posts and
struts etc. upto floor five level excluding the cost of
centering, shuttering ,finishing and reinforcement (a) 1:1:2
(1 cement : 1 Kanhaighat coarse sand: : 2 graded stone
aggrt. 20mm nominal size).
626 Reinforcement for R.C.C.work including bending,binding 22003.72 19788.24 Kg 159.000 3,498,591.48 3146330.55
and placing in position complete
(b) TMT bars.
627 FORM WORKS 0 - 0.00
628 Providing form work i/c centering & shuttering so as to give 1412.81 711.93 m2 1034.000 1,460,845.54 736135.85
a rough finish strutting and propping etc. height of propping
and centering below supporting floor to ceiling not
exceeding 4m and removal of the same for insitu reinforced
concrete to and plain concrete work in.(using 12mm
shuttering ply)(a) Foundation footings, bases of columns
etc. and mass concrete.
629 (b) Columns, pillars, posts and struts (square, rectangular 396.64 m2 1250.000 495,800.00 0.00
or polygon in plan).
632 Providing and fixing stainless steel (grade 304 ) railing 12438.41 kg 708.000 8,806,394.28 0.00
made of Hollow tubes, channels, plates etc., including
welding, grinding, buffing, polishing and making curvature
(wherever required) and fitting the same with necessary
stainless steel nuts and bolts complete, i/c fixing the railing
with necessary accessories & stainless steel dash fasteners
, stainless steel bolts etc., of required size, on the top of the
floor or the side of waist slab with suitable arrangement as
per approval of Engineer-in-charge
633 Granite stone slab flooring over 20 mm (average) thick 741.96 813.76 m2 8981.000 6,663,542.76 7308394.13
base of cement mortar 1 : 6 (1 Cement: 6 Kanhaighat
coarse sand:) laid and jointed with grey cement slurry
including rubbing and polishing complete with -(a) Granite
slab 20 mm slab thick (i)Jade Black 60 x 120 cm
634 Extra for nosing in marble stone for treads 1123.62 1474.17 Rm 381.000 428,099.22 561658.40
635 15 mm cement plaster 1:3(1 cement:3 Kanhaighat coarse 1551.58 246.95 m2 484.000 750,964.72 119524.39
sand)finished with a floating coat of neat cement.
636 Providing and applying wall putty/plaster of paris putty of 2 389.28 192.07 m2 231.000 89,923.68 44368.90
mm thickness over plaster surface to prepared the surface
even and smooth complete.
637 Applying one coat of cement primer of approved quality on 389.28 192.07 m2 46.000 17,906.88 8835.37
wall surface.
638 Finishing walls weather shield paint of approved quality on 389.28 192.07 m2 342.000 133,133.76 65689.02
new work ( three or more coats ) to give an even shade.
36,551,226.68 20,336,900.18
Details of Measurement(RCC STEPS)
Length Width Height
SI No Item Description Unit Nos (m) (m) (m) Qnty Remarks
Earth work in excavation in foundation trenches or drains i/c dressing of sides and ramming of
bottoms,including getting out the excavated soil and disposal of surplus excavated soil as directed
within a lead to 50 m.in Hard dense soil. (a) Lift above 1.5 m
Side Planter Box 2walls 5' Cum 142 1.52 0.125 0.90 24.35
Side Planter Box 2walls 2'6" Cum 142 0.61 0.125 0.90 9.74
Total 34.09
Granite stone slab flooring over 20 mm (average) thick base of cement mortar 1 : 6 (1 Cement: 6
Kanhaighat coarse sand:) laid and jointed with grey cement slurry including rubbing and polishing
complete with -(a) Granite slab 20 mm slab thick (i)Jade Black 60 x 120 cm
DISTRIBUTION BAR TOP & a
BOTTOM REINFORCEMENT IN 12 0.15 c 140 11 1540 0.150 2.999 0.150 3.299 5080.122 - - 4501.77 -
b
STEPS
MAIN BAR TOP & BOTTOM a c
REINFORCEMENT IN PLAN 12 0.15 b 142 21 2982 0.150 1.780 0.150 2.080 6202.56 - - 5496.42 -
PORTION
DISTRIBUTION BAR TOP & a c
BOTTOM REINFORCEMENT IN 12 0.15 b 142 13 1846 0.150 3.000 0.150 3.300 6091.8 - - 5398.27 -
PLAN PORTION
Sl. Boq
Item Description Units Executio
No. Quantity
n Qnty
989 Providing, laying naturally occurred sand gravel Grade -III m3 62.16
free from organic or other deleterious constituants including
watering ramming,consolidating in layers not exceeding
150mm (Spread thickness)and dressing etc. complete as
directed by the Engineer-in-charge
TOTAL
AMOUNT Work done
Basic rate
Without Amount
Taxes
0 0.000
157.000 1422.420 1532.54
0 0.000 0.00
10564.000 479077.400 34373.14
0 0.000 0.00
16544.000 247829.120 0.00
0 0.000 0.00
1034.000 17009.300 0.00
0 0.000 0.00
8981.000 506528.400 0.00
0 0.000 0.00
231.000 2082150.840 0.00
35905.68
Details of Measurement(Watch tower)
Length Width
SI No Item Description Unit Nos
(m) (m)
Earth work in excavation in foundation trenches or drains i/c dressing of sides and ramming of bottoms,i
out the excavated soil and disposal of surplus excavated soil as directed within a lead to 50 m.in Hard de
above 1.5 m
Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not
in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m.
P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering : - (a) 1:4:8 (
Kanhaighat coarse sand:: 8 graded stone aggrt. 40mm nominal size).
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of cent
shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1:2 (1 cement :1 Kanhaighat coa
graded stone aggregate 20 mm nominal size.)
Pile Caps PCC Cum 1 3.74 2.900
Pile Caps PCC Cum 1 3.74 2.900
RCC work in in walls (any thickness), including attached pilasters, buttresses, plinth and string ourses,fille
pillars, piers,abutment, posts and struts etc. upto floor five level excluding the cost of centering, shutteri
reinforcement (a) 1:1:2 (1 cement : 1 Kanhaighat coarse sand: : 2 graded stone aggrt. 20mm nominal size
Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. hei
and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu rein
to and plain concrete work in.(using 12mm shuttering ply)(a) Foundation footings, bases of columns etc.
concrete.
(g) Vertical surface such as walls (any thickness), partition and the like including attached pilasters,
plinth and the string courses and the like
Granite stone slab flooring over 20 mm (average) thick base of cement mortar 1 : 6 (1 Cement: 6 Ka
sand:) laid and jointed with grey cement slurry including rubbing and polishing complete with -(a) G
mm slab thick (i)Jade Black 60 x 120 cm
)
Height
Qnty Remarks
(m)
d ramming of bottoms,including getting
lead to 50 m.in Hard dense soil. (a) Lift
0.45 4.88
0.45 4.88
Total 9.76
dation etc. in layers not exceeding 20cm
m and lift upto 1.5m.
0.45 4.88
0.45 4.88
Total 9.76
shuttering : - (a) 1:4:8 (1 cem :4
0.15 1.63
0.15 1.63
Total 3.25
th and string ourses,fillets,columns,
st of centering, shuttering ,finishing and
grt. 20mm nominal size).
0.00
0.00 1.67=1.22+.
0.00 9-.15-.3
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Total 0.00
ng and propping etc. height of propping
the same for insitu reinforced concrete
s, bases of columns etc. and mass
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Total 0.00
ing attached pilasters, buttresses,
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Total 0.00
ar 1 : 6 (1 Cement: 6 Kanhaighat coarse
ng complete with -(a) Granite slab 20
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Sl. Boq
Item Description Units Executio
No. Quantity
n Qnty
780 Steel Work welded in built up sections framed work,i/c Qtl 289.37 289.37
cutting,hoisting,fixing in position & In gratings,framed
guard bars, ladders,railings,brackets and similar works
applying a priming coat of red lead paints. (h) In
gratings, framed guard bars, ladder, railling, brackets
and similar works
6
TOTAL
AMOUNT Work done
Basic rate
Without Amount
Taxes
0 0.000
0 0.000
157.000 95620.850 57211.22
0 0.000 0.00
10564.000 1286800.840 629926.39
0 0.000 0.00
16544.000 3343873.280 1973021.99
0.000
1034.000 1959254.220 1059426.74
484.000 655069.800 384809.25
12533988.440 8541304.101
Details of Measurement(Intermediate Drain)
Length Width Height
SI No Item Description Unit Nos Qnty
(m) (m) (m)
Earth work in excavation in foundation trenches or drains i/c dressing of sides and ramming of
bottoms,including getting out the excavated soil and disposal of surplus excavated soil as directed within a
lead to 50 m.in Hard dense soil. (a) Lift above 1.5 m
Total 364.40
P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering : - (a) 1:4:8 (1
cem :4 Kanhaighat coarse sand:: 8 graded stone aggrt. 40mm nominal size).
0
0
0
0
0
Total 0.00
Remarks
ming of
as directed within a
ng the cost of
(1 cement :1
436
132.9268 62.92683
n & In
ing coat of red lead
BAR BENDING SCHEDULE-( R
Dia of No of No of
SI No Description / Particulars Spacing Shape of bar
bar item bars
RCC FOOTING
Total= 2154.82
Total= 5691.22
0.615 0.886 1.575
1120.80 - -
- - -
219.60 - -
- - -
2196.00 - -
- - -
0 0.00
0 0.00
157.000 190795.82 122003.87
0 0.00
10564.000 3056587.76 2537022.96
1928.933 1601.049
13976.000 2695970.40 2239024.31
192.8933 160.1049
1762.000 1019669.40 586747.96
9897874.00 7691045.25
Details of Measurement(Paver Block)
Length Width Height
SI No Item Description Unit Nos
(m) (m) (m)
Earth work in excavation in foundation trenches or drains i/c dressing of sides and ramming of bottoms,including
out the excavated soil and disposal of surplus excavated soil as directed within a lead to 50 m.in Hard dense soil.
above 1.5 m
height shown in
pavilion glazing &
1.99 section+.15 for
6.86 granular base
10.26
9.92
16.18
16.54
11.31 2*22/7*(8) 50.28571
11.31 2*22/7*(8) 15.33101
18.24
13.06
39.00
29.38
5.68
1.17
1.76
5.35
59.55
0.76
36.54
5.58
0.00
90.78
-10.19
27.87
83.18
19.76 3.142857 100 10.76 29.20871
7.88
44.59
114.89
112.09
-14.18
777.09
uttering : - (a) 1:4:8 (1 cem :4
height shown in
pavilion glazing &
0.61 section+.15 for
2.12 granular base
3.17
3.06
5.00
5.11
3.49 2*22/7*(8) 50.28571
3.49 2*22/7*(8) 15.33101
5.64
4.04
12.05
9.08
1.76
0.36
0.54
1.65
18.40
0.23
11.29
1.73
0.00
28.05
-3.15
8.61
25.70
6.11 3.142857 100 10.76 29.20871
2.44
13.78
35.51
34.64
-4.38
0.00
240.16
height shown in
pavilion glazing &
0.41 section+.15 for
1.41 granular base
2.11
2.04
3.33
3.41
2.33 2*22/7*(8) 50.28571
2.33 2*22/7*(8) 15.33101
3.76
2.69
8.04
6.05
1.17
0.24
0.36
1.10
12.27
0.16
7.53
1.15
0.10
18.70
-2.10
5.74
17.14
4.07 3.142857 100 10.76 29.20871
1.62
9.19
23.67
23.09
-2.92
0.00
160.20
s & cross-sections by using naturally
organic or other deleterious
not exceeding 150 mm (spread
edging on both sides etc. complete as
height shown in
pavilion glazing &
1.23 section+.15 for
4.24 granular base
6.34
6.13
10.00
10.22
6.99 2*22/7*(8) 50.28571
6.99 2*22/7*(8) 15.33101
11.27
8.07
24.11
18.16
3.51
0.72
1.09
3.30
36.81
0.47
22.59
3.45
0.00
28.05
-3.15
8.61
25.70
6.11 3.142857 100 10.76 29.20871
2.44
13.78
35.51
34.64
-4.38
333.00
block (Rubber Moulded ) of M-30
oved size and design/shape laid in
arse sand :4 graded stone aggrt. 40mm
coarse sand) all complete as per the
height shown in
pavilion glazing &
4.10 section+.15 for
14.13 granular base
21.14
20.43
33.33
34.07
23.29 2*22/7*(8) 50.28571
23.29 2*22/7*(8) 15.33101
37.58
26.91
80.36
60.53
11.71
2.42
3.62
11.01
122.69
1.56
75.28
11.50
0.00
187.03
-21.00
57.42
171.37
40.72 3.142857 100 10.76 29.20871
16.24
91.88
236.71
230.95
-29.21
1601.05
Sl. Boq Execution
Item Description Units
No. Quantity Qnty
802 (b) Columns, pillars, posts and struts (square, m2 6.71 7.65
rectangular or polygon in plan).
803 (c) Sides & soffits of beams, beam haunchings, m2 31.63 7.58
cantilevers, girders, bressummers and lintels not
exceeding 1m in depth.
0 0.000
0 0.000
157.000 24156.020 100542.91
0 0.000 0.00
10564.000 487528.600 2029206.14
307.6667 1280.579
13976.000 644992.400 1841231.88
30.76667 128.0579
0 0.000 0.00
16544.000 1252049.920 3269319.57
0 0.000 0.00
0 0.000 0.00
0 0.000 0.00
16987.000 71515.270 82051.45
0 0.000 0.00
327.000 5500.140 8305.09
3303.32
3623649.510 10366683.513
Details of Measurement(Paver Block)
Width Height
SI No Item Description Unit Nos Length (m)
(m) (m)
Earth work in excavation in foundation trenches or drains i/c dressing of sides and ramming of bottoms,including
the excavated soil and disposal of surplus excavated soil as directed within a lead to 50 m.in Hard dense soil. (a) L
m
Local Parking Road right side Heavy paver Cum 1 17.9 4.93 0.49
Local Parking Road left side Heavy paver Cum 1 16.6 4.93 0.49
Local Parking curve Heavy paver Cum 1 15.0 4.93 0.49
Local Parking Heavy paver Cum 1 7.8 4.93 0.49
Local Parking curve Heavy paver Cum 1 14.6 4.93 0.49
Local Parking Heavy paver Cum 1 7.5 4.93 0.49
Local Parking Heavy paver Cum 1 20.5 4.93 0.49
Local Parking Heavy paver Cum 1 15.8 4.93 0.49
Local Parking middle Heavy paver Cum 2 15.7 4.93 0.49
Local Parking middle Heavy paver Cum 2 13.4 4.93 0.49
Local Parking middle Heavy paver Cum 2 16.5 4.93 0.49
Vip Parking area Cum 1 294.6 0.49
Drain Cum 1 27.8 0.15 0.39
Total
P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering : - (a) 1:4:8 (1 cem :4
coarse sand:: 8 graded stone aggrt. 40mm nominal size).
Local Parking Road right side Heavy paver Cum 1 17.9 4.93 0.15
Local Parking Road left side Heavy paver Cum 1 16.6 4.93 0.15
Local Parking curve Heavy paver Cum 1 15.0 4.93 0.15
Local Parking Heavy paver Cum 1 7.8 4.93 0.15
Local Parking curve Heavy paver Cum 1 14.6 4.93 0.15
Local Parking Heavy paver Cum 1 7.5 4.93 0.15
Local Parking Heavy paver Cum 1 20.5 4.93 0.15
Local Parking Heavy paver Cum 1 15.8 4.93 0.15
Local Parking middle Heavy paver Cum 2 15.7 4.93 0.15
Local Parking middle Heavy paver Cum 2 13.4 4.93 0.15
Local Parking middle Heavy paver Cum 2 16.5 4.93 0.15
Vip Parking area Cum 1 294.6 0.15
Drain Cum 1 27.8 0.15 0.15
Total
(b) 1:2:4 (1 cem :2 Kanhaighat coarse sand::4 graded stone aggrt.20mm n/size).
Local Parking Road right side Heavy paver Cum 1 17.9 4.93 0.10
Local Parking Road left side Heavy paver Cum 1 16.6 4.93 0.10
Local Parking curve Heavy paver Cum 1 15.0 4.93 0.10
Local Parking Heavy paver Cum 1 7.8 4.93 0.10
Local Parking curve Heavy paver Cum 1 14.6 4.93 0.10
Local Parking Heavy paver Cum 1 7.5 4.93 0.10
Local Parking Heavy paver Cum 1 20.5 4.93 0.10
Local Parking Heavy paver Cum 1 15.8 4.93 0.10
Local Parking middle Heavy paver Cum 2 15.7 4.93 0.10
Local Parking middle Heavy paver Cum 2 13.4 4.93 0.10
Local Parking middle Heavy paver Cum 2 16.5 4.93 0.10
Vip Parking area Cum 1 294.6 0.10
Drain Cum 1 27.8 0.15 0.10
Total
RCC work in in walls (any thickness), including attached pilasters, buttresses, plinth and string ourses,fillets,colum
piers,abutment, posts and struts etc. upto floor five level excluding the cost of centering, shuttering ,finishing and
reinforcement (a) 1:1:2 (1 cement : 1 Kanhaighat coarse sand: : 2 graded stone aggrt. 20mm nominal size).
Local Parking Road right side Heavy paver Cum 2 17.9 4.93 0.15
Local Parking Road left side Heavy paver Cum 2 16.6 4.93 0.15
Local Parking curve Heavy paver Cum 2 15.0 4.93 0.15
Local Parking Heavy paver Cum 2 7.8 4.93 0.15
Local Parking curve Heavy paver Cum 2 14.6 4.93 0.15
Local Parking Heavy paver Cum 2 7.5 4.93 0.15
Local Parking Heavy paver Cum 2 20.5 4.93 0.15
Local Parking Heavy paver Cum 2 15.8 4.93 0.15
Local Parking middle Heavy paver Cum 4 15.7 4.93 0.15
Local Parking middle Heavy paver Cum 4 13.4 4.93 0.15
Local Parking middle Heavy paver Cum 4 16.5 4.93 0.15
Vip Parking area Cum 1 294.6 0.15
Total
Providing and laying 80 mm thick factory made cement concrete interlocking paver block (Rubber Moulded ) of
made by block making machine with strong vibratory compaction and of approved size and design/shape laid in r
colour and pattern over 10 cm thick C.C. 1:4:8 ( 1 cement :2 Kanhaighat coarse sand :4 graded stone aggrt. 40mm
size)and filling the joints with cement mortar 1:3 (1 cement : 3 kanhaighat coarse sand) all complete as per the d
the engineer-in -charge.
Local Parking Road right side Heavy paver Sqm 1 17.9 4.93
Local Parking Road left side Heavy paver Sqm 1 16.6 4.93
Local Parking curve Heavy paver Sqm 1 15.0 4.93
Local Parking Heavy paver Sqm 1 7.8 4.93
Local Parking curve Heavy paver Sqm 1 14.6 4.93
Local Parking Heavy paver Sqm 1 7.5 4.93
Local Parking Heavy paver Sqm 1 20.5 4.93
Local Parking Heavy paver Sqm 1 15.8 4.93
Local Parking middle Heavy paver Sqm 2 15.7 4.93
Local Parking middle Heavy paver Sqm 2 13.4 4.93
Local Parking middle Heavy paver Sqm 2 16.5 4.93
Vip Parking area Sqm 1 294.6
Total
Qnty Remarks
42.87
39.78 height shown in
pavilion glazing &
35.83 section+.15 for
18.64 granular base
34.92 101.49
18.04
49.01
37.66
75.07
63.89
78.71
144.36
1.62
640.40
ttering : - (a) 1:4:8 (1 cem :4 Kanhaighat
13.25
12.29
11.07
5.76
10.79 101.49
5.57
15.15
11.64
23.20
19.74
24.32
44.19
0.62
197.61
8.83
8.20
7.38
3.84
7.20 101.49
3.72
10.10
7.76
15.47
13.16
16.22
29.46
0.42
131.74
nd string ourses,fillets,columns, pillars,
ing, shuttering ,finishing and
20mm nominal size).
0.48 0.083333
0.48
lconies,shelves,chajjas,
excluding the cost of centering,
d: : 2 graded stone aggrt. 20mm nominal
0.95 8.422764
0.95
7.65 0.333333
7.65
lintels not exceeding 1m in depth.
7.58 8.422764
7.58
(1 Cem:4 kanhaighat C/Sand)
4.83 8.422764
4.83
25.40 9.256098
25.40
25.40 9.256098
0.27
4.17
29.84
g coat of neat cement.
25.40 9.256098
25.40
25.40 9.256098
25.40 9.256098
0.27
4.17
55.24
& cross-sections by using naturally
organic or other deleterious constituent
g 150 mm (spread thickness) including
etc. complete as directed by the
26.50
24.59
22.15
11.52
21.59 101.49
11.15
30.29
23.28
46.40
39.49
48.65
44.19
349.79
lock (Rubber Moulded ) of M-30 grade
ze and design/shape laid in required
4 graded stone aggrt. 40mm nominal
nd) all complete as per the direction of
88.33
81.95
73.83
38.41
71.95 101.49
37.16
100.98
77.58
154.66
131.62
162.16
294.61
1313.26
BAR BENDING SCHED
Dia of No of No of
SI No Description / Particulars Spacing Shape of bar
bar item bars
Column
MAIN BAR 10 a 10 4
b
e a
RING 8 0.15 d b 10 9
c
Beam
MAIN BAR 10 a 10 4
b C
e a
RING 8 0.15 d b 10 185
c
AR BENDING SCHEDULE-(VIP PARKING)
Lap/
length Devlopme 0.394
Total No Cutting Total
of bars nt length length length
A B C D E 8MM
1850 0.220 0.220 0.220 0.220 0.150 2.400 3.210 5938.5 2338.86
Total= 2452.64
Total= 3202.32
0.615 0.886 1.575
38.51 - -
- - -
711.17 - -
- - -
Area of
Planter Box near museum Cum 2 231.99 1.020 473.25 trapezium*L
of wall
Planter Box Near main gate Cum 1 61.55 1.020 62.78 1.67=1.22+.9-.1
Planter Box Near main gate Cum 1 32.90 1.020 33.56 5-.3
Total= 569.59
Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc.
height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the
same for insitu reinforced concrete to and plain concrete work in.(using 12mm shuttering ply)(a)
Foundation footings, bases of columns etc. and mass concrete.
Total= 167.53
(g) Vertical surface such as walls (any thickness), partition and the like including attached pilasters, buttresses,
plinth and the string courses and the like
Footing
b
1 Bar in Bottom 10 0.15 c 1 2177 2177 0.180 0.800 0.180 1.160 2525.32 - 1554.04 - - - - -
a
2 Bar in Bottom 10 0.15 c 1 2177 2177 0.180 0.800 0.180 1.160 2525.32 - 1554.04 - - - - -
a b
b
3 Bar in Top 10 0.15 c 1 7 7 326.437 0.5 326.94 2288.559 - 1408.34 - - - - -
a
Bar in wall 10 0.15 c 1 2178 2178 3.150 0.300 3.450 7514.1 - 4624.06 - - - - -
d b
d
Striup Bar 8 0.15 a c 1 2178 2178 0.300 0.150 0.300 0.150 0.640 1.540 3354.12 1321.01 - - - - - -
- - - - - - -
- - - - - - -
- - - - - - -
Total= 1321.01 18182.44 5598.32 0.00 0.00 0.00 0.00
Total= 25101.77