1. What kind of bond is commonly used?

Vitrified

2. Mark the cutter which works simultaneously with up cut and down cut process

Shell end mill

3. The grade of grinding wheel depends upon ______

Hardness of bond

4. Welding operation heated above 450 0C is ______

Brazing

5. Materials usually ceramics and resistance to very high temperature

Refractories

6. Used to clean the gauge blocks before and after use is ______

Chamois leather or lenen cloth

7. Where the relieved cutters are regrounded?

On the flank

8. Maximum stress to which the material can be subjected with out trace of any permanent set

Elastic limit

9. What happens if the job is loosely fitted between the centers in the cylindrical grindings?

The job will be out of round

10. Operation making cone shaped enlargement

Countersinking

11. Heating to some 100 0F and cooling at room temperature to produce uniform structure of
metal.

Normalizing

12. Tangent to the bottom of the tooth spaces

Root circle
13. Machine tools used to form metal parts by using revolving cutter with many teeth is ____

Milling machine

14. Modulus of resilience is____

Measure of a materials ability to store strain energy

15. Material has 66% of Nickel, 29% copper, and 3% aluminum

K monel

16. Major alloy in steel

Cr

17. When preparing tap a hole, size of drill will be _____

Smaller than of the size of tap

18. Is a process of cooling slowly to soften the metal

Annealing

19. Distance between rivet center nearest each other in adjacent row is ____

Diagonal pitch

20. Process of forming metal parts by the use of dies

Rolling

21. Ratio of load bearing force to applied force of a lever is_____

Mechanical advantage

22. Shaper operation having the excess material remain is ______

Roughing

23. Maximum stress which the material can be subjected without trace of any permanent set is

Elastic limit

24. Application of specific combination of allowances and tolerances is _____

Fit
25. Trade name for potential alloy made up of Cobalt, Chromium, and Tungsten.

Stellite

26. Combination of mechanism and components uses energy, load, and motion for specific
purpose.

Machine

27. Defined by displacement per length is ____

Strain
28. In cranes and other hoisting equipment. How many whistle signals to lower the boom?

Five short blasts

29. Combination of applied normal and shear stresses that produces maximum principal normal
stress is _____

Principal normal stress

30. Grashof four- bar mechanism that shortest link if frame or fixed link

Drag-link mechanism

31. When will the feed motion takes place in a slotting machine?

After each double stroke

32. Composition of stainless steel 302 is ____

18% Cr and 8% Ni

33. Refers to the space of adjacent coils in spring

Coil clearance

34. Bond for wet grinding

Silicate

35. Error during knurling

Too much longitudinal feed

36. During which the formation of the chatter marks is very likely _______

During up cut milling with the straight tooth cutter

Equalize the weight in every portion of the wheel

38. Most popular alloy spring steel for involving higher stresses is _____

Chrome vanadium

39. Spring made from one or more flat strips

Leaf spring

40. In straight bevel gear, the angle between pitch cone and face cone is ____

Addendum angle

41. In straddle milling operation, how many cutters are used to mill?

Two

42. Joining of metals by means of high current is ______

Resistance welding

43. Use to measure engine crank web deflection

Distortion gage

44. Steel balls are manufactured by ________

Cold heading

45. Planer are built up for ______

Heavy duty

46. Process of heating of steel at critical temperature and cooling rapidly is _____

Hardening

47. In slotter the tables gets ______ different feeds

Three

48. For gear cutting which cutter is used?

Form relieve cutter

Arbor

50. The process of checking by rolling checkered is ______

Knurling

51. Cause of hot bearing

 Improper alignment
 All of the above
 Improper oil
 Dirt oil

52. Bearing that prevent axial motion of rotating shaft is ______

Thrust bearing

53. Cutting action of both strokes in _____

Universal planer

54. Straddle milling is done by means of two

Side milling

55. Two different movement or crank in ______

Compound indexing

56. The index of 3 holes in 27 holes circle is ______

10

57. Ratio of worm wheel and worm is ______

40:1

58. Operation of which scratches, tool marks, and rough surfaces are removed

Polishing

59. Production process whereby the cutter is used to finish internal or external surfaces

Broaching
60. Steel that owes distinctive property or jointly to other elements or carbons

Alloy steel

61. Process of heating and cooling to produced rounded or globular

Spheroidizing

62. Thin walled pressure vessel that is right circular cylinder with flat ends. The stress is greatest
at _______

Circumferential

63. Class of cemented carbide

Cerments

64. Heat treatment process close to lower limit or cooling as desired

Process annealing

65. Graphically visualize of stress by different planes passing

Mohrs circle

66. Cause to form into all nodules resulting higher strength

Nodular cast iron

67. Tool is reciprocates and feed is stationary

Shaping

68. Product of blast furnace or made from conduction of iron ore

Pig iron

69. The theory based of the assumption that failure will occur at maximum value

Saint venants failure prediction theory

70. Aside from oxygen, other gas used in gas welding is ______

Acetylene

71. Two touching surfaces have high contact and have a minute relative motion

Fretting
72. Heated above 4500C

Brazing

73. It is low cost spring material

Hard drawn wire

74. Effect of cold working

Decreased strength and ductility

75. In a lathe machine. What do you call the diameter of the largest work piece?

Swing

76. Part of headstock of lathe machine use to transmit power form spindle

Back gear

77. Computation method used for soling a complex shapes

Finite element analysis

78. When a hot part is cooled suddenly by quenching. Some part of metals crack as a result.

Thermal shock failure

79. Spring material that is hard drawn (80% reduction)

Music wire

80. Different properties in all directions at point in solid

Anisotropic properties

81. Manganese steel containing 0.20% carbons

SAE 1320

82. Bolt intended use in bolting wooden parts together.

Carriage bolt

83. Wire rope that twisted at opposite direction.

Regular lang lay

Rusting

85. Number of teeth per inch pf pitch diameter

Diametral pitch

86. Use to measure engine crank wed deflection

Distortion gage

87. Key to prevent rotation of shaft is _______

Feather key

88. Alloy with 9-16% chromium

Stainless steel

89. Algebraic difference of size and basic size

Deviation

90. Lubrication where the load carrying surfaces are separated by relatively thick film of
lubricant

Hydrodynamic lubrication

91. Strain energy per unit volume

Modulus of resilience

92. Speed that dynamically unstable

Critical speed

93. Capacity of material to absorb energy

Resilience

94. Absorb energy up to fracture

Toughness

95. Theory in cyclic and impact loading

Miners Rule
96. Load is applied transversely to longitudinal axis member

Bending load

97. Ball bearing with race

Conrad bearing

98. Failure prediction theory, where the maximum shear stress exceeds a critical value

Maximum-shear- stress theory

99. Process for producing internal straight cylindrical surfaces or profiles

Boring