Cat.No.

B01-13

Model KH13
Pressure Transmitter
OUTLINE
This is a simple construction pressure transmitter equipped
with an evaporative-condensing-type semiconductor strain
gauge at the pressure sensing portion. A stainless steel
case has been applied to this small, compact and
excellent-in-cost-performance pressure transmitter, being
appropriate for hydraulic devices using oil or water.
This pressure transmitter demonstrates high reliability even
under serious utilization conditions.

FEATURE
• Because of equipping an evaporative-condensing-
type semiconductor strain gauge, this pressure
transmitter demonstrates excellent durability and
stability.
• No moving parts exist. This pressure transmitter
demonstrates excellent vibration resistance and
impact resistance.
• Because of rigid construction where a metallic
diaphragm is welded to the case, this pressure
transmitter is appropriate for hydraulic machines
using oil and water, construction machines and
vehicles.
• This pressure transmitter is small and light.
• This pressure transmitter is of volume sales type.

KH13-A33 (Mass production type) KH13-633 KH13-833

-B33 (Mass production type) -733 -933

Superior to vibration and shock,and is available for wide Connection is richness and accuracy output adopts to object /
operating temperature range. condition, and a selection is possible.
Accuracy:±3.0%F.S. (Synthesis accuracy) Accuracy: ±0.5%F.S. or ±1.0%F.S.

COMMON SPECIFICATION
Fluid: Pressure range:
Gas or Liquid 0 ~ 1h0 ~ 50MPa (0 ~ 10h0 ~ 500kgf/cm2)
Operating condition: Max.allowable pressure:
Under the normal condition,where there is no inflammable 200% of rated pressure (150% for range 35, 50MPa)
gas or liquid which cause the ignition or explosion. Case material:
Wetted parts material: 304st.st.
Diaphragm 630st.st. (17-4PH st.st.) Weight:
Joint 304st.st. Approx. 100 g
Throttle S35C (KH13-B33 only)

WIRING
2 wire system 3 wire system
Red
Red

Power source Green Power source

KH13 KH13 Receiver
24V DC + - 24V DC
White
Receiver White
+ -
SPECIFICATION 1

Mass production type:

Pressure range Temperature Operating Storage Vibration Shock

Type No. Connection Construction
MPa (kgf/cm2) compensation temperature temperature proof resistance
0~1 (0 ~ 10)
~2 ( ~ 20)
~ 3.5 ( ~ 35)
-10 -20 -30 6.8m/s2 294m/s2
KH13-A74 R1/4 ~5 ( ~ 50) IP54
~ 70g ~ 80g ~ 90g (33.3Hz) (11ms or less)
~ 10 ( ~ 100)
~ 20 ( ~ 200)
~ 35 ( ~ 350)

0~5 (0 ~ 50)
KH13-B74 R1/4
~ 10 ( ~ 100)
-20 -30 -40 147m/s2 490m/s2
~ 20 ( ~ 200) IP65
~ 110g ~ 120g ~ 125g (10 ~ 200Hz) (20ms or less)
KH13-BC4 G3/8B ~ 35 ( ~ 350)
~ 50 ( ~ 500)

Synthesis accuracy: Output:

±3.0%F.S. (Synthesis accuracy in temperature compensation limit) 1 ~ 5V DC, 0.5 ~ 4.5V DC(KH13-B 3 3 only)
* It contains linearity, hysteresis, repeatability, temperature Load resistance:
coefficient (temperature compensation limit) and line 10kΩ min.
voltage variation error Transmission system:
Power source: 3 wire system
10 ~ 30V DC (Standard 24V DC), 5V DC(KH13-B 3 3 only)

DIMENSIONS1

Output (+) Output (+) Output (+)

Power source (+) (Green) Power source (+) (Green) Power source (+) (Green)
(Red) Common (Red) Common (Red) Common
(White) (White) (White)
(13.9)
(13.9)

(13.9)

(23.1) (23.1) (23.1)

(32.5)
(32.5)

(32.5)

Econoseal J series Econoseal J series Econoseal J series

<MARK(+)> (NIPPON AMP) <MARK(+)> (NIPPON AMP) <MARK(+)> (NIPPON AMP)

0.5mm2 0.5mm2 0.5mm2

(300)
(300)

(300)

(32 DIA.) (32 DIA.)

(35.5)
(35.5)

(32 DIA.)
(35.5)
62.5
(61.5)
(61.5)

19$21.9 Hex. 19$21.9 Hex. 22$25.4 Hex.

10
10

11

0
14.6 DIA.-0.10
16
16

16

O-ring P14
4

(JIS type 1B NBR)

R1/4 R1/4
Within 1
Within 1

G3/8B
Throttle 0.7 DIA.
8 DIA. 8 DIA. Throttle 0.7 DIA.

KH13-A74 KH13-B74 KH13-BC4

SPECIFICATION 2

Pressure range Temperature Operating Storage

Type No. Connection Accuracy
MPa(kgf/cm2) compensation temperature temperature

0~1 (0 ~ 10)
KH13-6 3 4 G3/8B ±1.0%F.S.
R1/4 ~2 ( ~ 20)
KH13-7 3 4 R3/8 0 ~ 3.5 (0 ~ 35) -20 -20 -30
M18$1.5 ~5 ( ~ 50) ~ 70g ~ 70g ~ 80g
G3/8A ±0.5%F.S.
KH13-8 3 4 ~ 10 ( ~ 100)
R1/8 or
~ 20 ( ~ 200)
1/8NPT ±1.0%F.S.
KH13-9 3 4 ~ 35 ( ~ 350)
1/4NPT ~ 50 ( ~ 500)

Accuracy:
±0.5%F.S. or ±1.0%F.S. Power source Output Load Transmission
resistance system
(Depend on range)
Temperature coefficient: 24V DC±10% 500Ω max.
4 ~ 20mA DC 2 wire system
Zero ±0.05%F.S./g (In case of accuracy ± 0.5 % F.S.) 15V DC±10% 100Ω max.
Span ±0.1%F.S./g (In case of accuracy ± 1.0 % F.S.)
24V DC±10%
1 ~ 5V DC
12V DC±10% 10kΩ min. 3 wire system
0 ~ 5V DC
15V DC±10%

DIMENSIONS 2

Electric wire type Shielded cable type

2 wire system 3 wire system
(-) Power Output(+)
(+) source(+) (Green)
(White)
(Red) (Red) Common
(White)
(14.05)

(13.9)

(18.3) (23.1)
L(Case 2 m without indication)
(32.5)

6 DIA. Shielded cable

Econoseal J series
<MARK(+)>(NIPPON AMP)

0.5mm2
(300)
(35.5)

(35.5)

(32 DIA.) (32 DIA.)

(64.5)

(64.5)

22$25.4 Hex. 22$25.4 Hex.

11

11
18

18

G3/8B G3/8B
5 DIA. 5 DIA.
3

Other connection
(63.5)
(61.5)

62.5

19$21.9 Hex. 19$21.9 Hex. 22$25.4 Hex.

10
10

11

0
14.6 DIA. -0.10
18
16

16

O-ring P14
4

(JIS type 1B NBR)

R1/4 R3/8
Within 1

Within 1

Within 1

G3/8A
Throttle 0.7 DIA. Throttle 0.7 DIA.
8 DIA. In case of throttle inclued 8 DIA. In case of throttle inclued 8 DIA. Throttle 0.7 DIA.
 Type No. constitution 1 Please specify Type No.,each specification and range, when ordering.

Note: For this Model,there is no applicable item for the figures X,but please specify X when ordering.

Mass production type

Throttle
A Electric wire + EJ II (IP54 only) Nil
B Electric wire + EJ II (IP65 only) S53C

1 Type 8 Throttle
0 Nil
F S35C

Selection spec. Additional spec. (Option)

Pressure transmitter 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

K H 1 3 4 A 1 0 0
Type No.

12 Treatment
2 Connection
0 Nil
7 R1/4 1 Use no oil
C G3/8 O-ring 2 Use no water
(It can produce only 1 form B selection)
3 Use no oil & water

3 Wetted parts material 11 Condenser

4 Diaphragm: 630st.st. (17-4PH st.st.) Built-in condenser Through capacition
Joint: 304st.st.
0 With With
(standard) (standard)

4 Pressure range (MPa)

(When ordering,please specify pressure range & unit. )

1 0 ~ 1, 2, 3.5 10 Cable terminal

(It can produce only 1 form A selection)
0 Standard
2 0 ~ 5, 10
3 0 ~ 20, 35
4 0 ~ 50

9 Electric wire
1 Electric wire (With 0.3 m as standard)
5 Accuracy Latex wire EF0.5mm 2 2.2 DIA.
Standard color:: Red/Green/White
A ±3.0%F.S. (Synthesis accuracy)

6 Power source
D 5V DC
7 Output
It can produce only 7 8 1 ~ 5V DC
output 0.5-4.5 V DC output
Y 0.5 ~ 4.5V DC
by 1 form B selection
(It can produce only 1 form B selection)
M 10 ~ 30V DC (Standard 24V DC)

15 Document
0 Nil
1 Please specify your requirement
Drawing one sheet,Instruction manual,
Inspection procedure,Mill sheet,
Test report
 Type No. constitution 2 Please specify Type No.,each specification and range, when ordering.

Note: For this Model,there is no applicable item for the figures X,but please specify X when ordering.

Power source
6 Electric wire + EJ II
24V DC±10%
7 Electric wire + other indication connector *
12V DC±10%
8 Shielded cable
15V DC±10%
9 Shielded cable + other indication connector *

* If only electric wire is required,please select

above 7 and designate 7 or 8 in 10 electric
wire terminal. 6 Power source
1 24V DC±10%
6 12V DC±10% For 4 ~ 20mA is not available
1 Type A 15V DC±10% 4 ~ 20mA is applicable for load resistance less than 100Ω

Selection spec. Additional spec. (Option)

Pressure transmitter 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

K H 1 3 4
Type No.

2 Connection
12 Treatment
Throttle 0 Nil
0 G3/8A O-ring 1=12 o 1 Use no oil
3 G3/8B — 2 Use no water
7 R1/4 o 3 Use no oil & water
8 R3/8 o
A M18 O-ring —
15 Document
C G3/8A O-ring 1=16 o
0 Nil
E R1/8 —
1 Please specify your requirement
F R1/4 — Drawing one sheet,Instruction manual,
G R3/8 — Inspection procedure,Mill sheet,
J 1/8NPT — Test report
K 1/4NPT o
If other connection or throttle is required,please
contact us.
11 Condenser
3 Wetted parts material
Built-in condenser Through capaciton
4 Diaphragm: 630st.st. (17-4PH st.st.) 0 Include (standard) Include (standard)
Joint: 304st.st.
1 With Nil
2 Nil With
4 Pressure range (MPa)
3 Nil Nil
(When ordering,please specify
pressure range & unit.) Because it is different by installation environment,
please contact us.
1 0 ~ 1, 2, 3.5
2 0 ~ 5, 10 When selected 6 or 8 in 1 type
3 0 ~ 20, 35
10 Cable terminal
4 0 ~ 50 0 Standard

When selected 7 in 1 type

5 Accuracy 10 Electric wire terminal
4 ±0.5%F.S. 3.5MPa or over Terminal treatment Manufacturer name Type
6 ±1.0%F.S. K Connector Tajimi R04-J6F
L Connector Tajimi R04-P6M
7 Output
M Connector Nanaboshi NJW-205-PM6
1 4 ~ 20mA DC (2 wire system) N Connector Omron XS2B-D421
6 0 ~ 5V DC (3 wire system) P Connector Molex 5196-04 (Non-Drip-proof)
±0.5 % F.S. is
implementation impossibility Q Connector Molex 5195-03 (Non-Drip-proof)
8 1 ~ 5V DC (3 wire system) R Connector Molex 5557-04R (Non-Drip-proof)
S Connector J.S.T. VHR-3N (Non-Drip-proof)
8 Throttle
1 Solderless contact J.S.T. V0.5-3
0 Nil 2 Solderless contact J.S.T. V0.5-4
F S35C
When selected 9 in 1 type
G SUSXM7 *
10 Cable terminal
* SUS forged part, water hammer
countermeasures business Terminal treatment Manufacturer name Type
In case of electric wire type (with 0.3m as standard) A Connector AMP (Standard) Econoseal J series MARK II+174354-2 2pin
9 Electric wire B Connector AMP (Standard) Econoseal J series MARK II+174359-2 3pin
1 Latex wire EF0.5mm2 2.2 DIA Standard color: Red/Green/White C Connector Yazaki 7222 • 6234-40 3pin
2 AEX0.5mm2 2.0 ~ 2.2 DIA Standard color: Red/White/Black D Connector Mitsubishi Z03M-GY 3pin
It can respond to 0.2m-0.5m, and give order by 0.1m unit. 1 Solderless contact J.S.T. V0.5-3
2 Solderless contact J.S.T. V0.5-4
In case of cable type (with 2m as standard) 3 Solderless contact J.S.T. V1.25-3
9 Cable
4 Solderless contact J.S.T. V1.25-4
0 Shielded cable Standard In case of
Cable color: Black 6 DIA Core line AWG22 1.56 DIA electric wire only
Standard color: Red/Green/White 10 Electric wire terminal
1 Shielded cable Special 7 It shows it With call gate tube
Standard color: Black 6 DIA Core line AWG22 1.56 DIA 8 It shows it With call gate tube
Standard color: Red/White/Black
* Should be 7 in 1 type
It can respond to 0.5m-5m, and give order by 0.5m unit.