Project:

Project no:
Author:

Project data
Project name
Project number
Author
Description
Date 7/08/2022
Design code AS

Material
Steel 3679.1-300
Concrete N32

1/7
Project:
Project no:
Author:

Project item CON1

Design
Name CON1
Description
Analysis Stress, strain/ loads in equilibrium

Members

Geometry

β – Direction γ - Pitch α - Rotation Offset ex Offset ey Offset ez

Name Cross-section Forces in
[°] [°] [°] [mm] [mm] [mm]
COL 2 - 48.3x4 CHS 0.0 -90.0 0.0 0 0 0 Node

Cross-sections
Name Material
2 - 48.3x4 CHS 3679.1-300

Anchors
Diameter fu Gross area
Name Bolt assembly
[mm] [MPa] [mm2]
M12 4.6 M12 4.6 12 400.0 113

2/7
Project:
Project no:
Author:

Load effects (forces in equilibrium)

N Vy Vz Mx My Mz
Name Member
[kN] [kN] [kN] [kNm] [kNm] [kNm]
LE2 COL 9.0 0.0 0.0 0.0 0.0 0.0

Foundation block
Item Value Unit
CB 1
Dimensions 750 x 750 mm
Depth 600 mm
Anchor M12 4.6
Anchoring length 100 mm
Shear force transfer Anchors

Check

Summary
Name Value Check status
Analysis 100.0% OK
Plates 0.0 < 5.0% OK
Anchors 34.2 < 100% OK
Welds 66.9 < 100% OK
Concrete block 18.1 < 100% OK
Buckling Not calculated

Plates
fy Thickness σEd εPl σcEd
Name Loads Check status
[MPa] [mm] [MPa] [%] [MPa]
COL 320.0 4.0 LE2 108.0 0.0 0.0 OK
BP1 320.0 6.0 LE2 167.2 0.0 0.0 OK

Design data
fy εlim
Material
[MPa] [%]
3679.1-300 320.0 5.0

Symbol explanation
εPl Plastic strain
σcEd Contact stress
σEd Eq. stress
fy Yield strength
εlim Limit of plastic strain

3/7
 Project:
Project no:
Author:

Overall check, LE2

Strain check, LE2

4/7
 Project:
Project no:
Author:

Equivalent stress, LE2

Anchors
N*tf V* ϕNRc ϕVRc ϕVRcp Utt Uts Utts
Shape Item Loads Status
[kN] [kN] [kN] [kN] [kN] [%] [%] [%]
A5 LE2 4.8 0.1 56.7 37.7 113.3 34.2 0.6 20.0 OK

A6 LE2 4.8 0.1 56.7 37.7 113.3 34.2 0.6 20.0 OK

A7 LE2 4.8 0.1 56.7 37.7 113.3 34.2 0.6 20.0 OK

A8 LE2 4.8 0.1 56.7 37.7 113.3 34.2 0.6 20.0 OK

Design data
ϕNtf ϕVRs
Grade
[kN] [kN]
M12 4.6 - 1 17.0 11.5

5/7
 Project:
Project no:
Author:

Symbol explanation
N*tf Tension force
V* Resultant of bolt shear forces Vy and Vz in shear planes
ϕNRc Concrete cone resistance - AS 5216:2018 - Chapter 6.2.2
ϕVRc Concrete edge resistance - AS 5216:2018 - Chapter 7.2.2
ϕVRcp Concrete pry-out resistance - 5216:2018 - Chapter 7.2.3
Utt Utilization in tension
Uts Utilization in shear
Utts Utilization in tension and shear
ϕNtf Tension resistance - AS 5216:2018 - Chapter 6.2.1
ϕVRs Bolt shear resistance - AS 5216:2018 - Chapter 7.2.1

Weld sections
fuw tt tw v*w ϕvw Ut
Item Edge Loads Status
[MPa] [mm] [mm] [kN/m] [kN/m] [%]
BP1 COL LE2 490.0 ◢ 2.8 ◢ 4.0 445.3 665.2 66.9 OK

Symbol explanation
fuw Nominal tensile strength of weld metal
tt Throat thickness of weld
tw Leg size
v*w Design force per unit length of weld
ϕvw Nominal capacity of a fillet weld per unit length
Ut Utilization
◢ Fillet weld

Concrete block
A1 A2 σ ϕfb Ut
Item Loads Status
[mm2] [mm2] [MPa] [MPa] [%]
CB 1 LE2 1751 501184 6.3 34.6 18.1 OK

Symbol explanation
A1 Loaded area
A2 Supporting area
σ Average stress in concrete
ϕfb Concrete block bearing resistance – AS 3600, Cl.12.6
Ut Utilization

Buckling
Buckling analysis was not calculated.

6/7
Project:
Project no:
Author:

Code settings
Item Value Unit Reference
Coefficient of friction between steel and concrete 0.55 -
Slip factor in friction-type connections 0.35 - AS 4100-2020 - Cl.9.2.3.2
Limit plastic strain 0.05 -
Detailing No
Minimum bolt pitch [d] 2.50 - AS 4100-2020 - Clause 9.5.1
Minimum edge distance to a bolt [d] 1.25 - AS 4100-2020 - Cl.9.5.2
Concrete breakout resistance check Both
Cracked concrete Yes
Local deformation check No
Local deformation limit 0.03 - CIDECT DG 1, 3 - 1.1
Geometrical nonlinearity (GMNA) Yes Analysis with large deformations for hollow section joints

7/7