Lesson 1.

Curriculum Design
A Curriculum Design is reflected in a written curriculum either as a lesson plan, syllabus,
unit plan or a bigger curriculum like K to12. Before a teacher shall put this plan or design into
action, he/she must need to consider the important processes and tool in curriculum designing.

Lesson Objectives:
At the end of this lesson, you will be able to:
• Identify the fundamentals of curriculum designing
• Appreciate the task of designing a curriculum

Discussion:

Building on Peter Olivia’s 10 Axioms for Curriculum Designers

Before a teacher designs a curriculum, it would be of great importance to connect to the
fundamental concepts and ideas about the curriculum mentioned in Modules 1 and 2. Every
curriculum designer, implementer, or evaluator should take in minds the following general
axioms as a guide in curriculum development (Olivia, 2003):

1. Curriculum change is inevitable, necessary, and desirable. Earlier it was stated that one of
the characteristics of curriculum is it’s being dynamic. Because of this, teac hers should respond
to the changes that occur in schools in its context. Societal development and knowledge
revolution come so fast that the need to address the changing condition requires new curriculum
designs.

2. Curriculum is a product of its time. A relevant curriculum should respond to changes

brought about by current social forces, philosophical positions, psychological principles, new
knowledge, and educational reforms. This is also called timeless.

3. Curriculum changes made earlier can exist concurrently with newer curriculum
changes. A revision in a curriculum starts and ends slowly. More often, curriculum is gradually
phased in and phased out, thus the changes that occur can coexist and oftentimes overlap for long
periods of time.

4. Curriculum change depends on people who will implement the change. Teachers who will
implement the curriculum should be involved in its development, hence should know how to
design a curriculum. Because the teachers are the implementers of the curriculum. It is the best
that they should design and own the changes. This will ensure an effective and long-lasting
change.
5. Curriculum development is a cooperative group activity. Group decisions in some aspects
of curriculum development are suggested. Consultations with stakeholders, when possible, will
add to a sense of ownership. Even learners should participate in some aspect of curriculum
designing. Any significant change in the curriculum should involve a broad range of stakeholders
to gain their understanding, support, and input.

6. Curriculum development is a decision-making process made from choices of alternatives.

A curriculum developer or designer must decide what contents to teach, philosophy or point of
view to support, how to provide for multicultural groups, what methods or strategies, and what
type of evaluation to use.

7. Curriculum development is an ongoing process. Continuous monitoring, examination,

evaluation, and improvement of curricula are to be considered in the design of the curriculum.
As the needs of learners’ change, as society changes, and as new knowledge and technology
appear, the curriculum must change.

8. Curriculum development is more effective if it is a comprehensive process, rather than a

“piecemeal”. A curriculum design should be based on a careful plan, should clearly establish
intended outcomes, support resources and needed time available and should equip teaching staff
pedagogically.

9. Curriculum development is more effective when it follows a systematic process. A

curriculum design is composed of desired outcomes, subject matter content complemented with
references, set of procedures, needed material and resources evaluation procedure which can be
place in a matrix

10. Curriculum development starts from where the curriculum is. Curriculum planners and
designers should begin with existing curriculum. An existing design is a good starting point for
any teacher who plans to enhance and enrich a curriculum.

Elements or Components of a Curriculum Design

There are many labels or names for curriculum design. Some would call it a syllabus, or a lesson
plan. Some would call it a unit plan or a course design. Whatever is the name of the design, the
common components for all of them are almost the same. However, some schools, institutions or
departments may add other minor parts or trimmings to the design. Let us take the Lesson plan as
 a miniscule curriculum. A lesson plan or teaching guide includes (1) Intended Learning
Outcomes (ILO) objectives, (2) Subject Matter or Content, (3) Teaching and Learning Methods,
and (4) Assessment Evaluation. Each of these components or elements is described below.

I. Behavioral Objectives or Intended Learning Outcomes

Begin with the end in view. The objectives or intended learning outcomes are the
reasons for undertaking the learning lesson from the student’s point of view; it is desired
learning outcome that is to be accomplished in a particular learning episode, engaged in
by the learners under the guidance of the teacher. As a curriculum designer, the beginning
of the learning journey is the learning outcomes to be achieved. In this way, both the
learner and the teacher is guided by what to accomplish.
The behavioral objectives, intended learning outcomes or desired learning
outcomes are expressed in action words found in the revised Bloom’s Taxonomy of
Objectives (Andersen and Krathwohl, 2003) for the development of cognitive skills. For
the effective skills, the taxonomy made by Krathwohl and for the psychomotor domain
by Simpson.
The statement should be SMART: Specific, Measurable, Attainable, Result
Oriented and Time bound. For a beginner, it would help if you provide the condition,
Performance and Extent or Level of Performance in the statement of the intended earning
outcomes.
For example, if a less on intends the students to identify the parts of a simple
flower as stated in the desired learning outcomes, then students should have identified the
parts of a simple flower, at the end of the lesson.
Sometimes the phrase intended learning outcomes is used to refer to the
anticipated result after completing the planned activity or lesson. In framing learning
outcomes, it is a good practice to:

1. Express each outcome in terms of what successful students will be able to do. For
example, rather than stating. Students will be able to explain the reason why… it should
be: ‘Students must have explained the reason why…’ This helps students to focus on
what they have to achieve as learning. It will also help the curriculars devise appropriate
assessment tasks.

2. Include different kinds of outcomes. The most common are cognitive objectives (learning
facts, theories, formulae, principles, etc.) and per formance outcomes (learning how to
carry out procedures, calculations and processes, which typically include gathering
information and communicating results). In some contexts, affective outcomes are
important too (for developing attitudes or values, e.g. those required as a person and for a
particular profession).
II. Content/ Subject Matter
The content of the lesson or unit is the topic or subject matter that will be covered. In
selecting content, you should bear in mind the following principles in addition to those
mentioned about the content in previous lessons:

1. Subject matter should be relevant to the outcomes of the curriculum. An effective

curriculum is purposive and clearly focused on the planned learning outcomes.
2. Subject matter should appropriate to the level of the lesson or unit. An effective
curriculum is progressive, leading students towards building on previous lessons.
Contents which are too basic or too advanced for the development levels of learners make
students either bored or baffled, and affect their motivation to learn.
3. Subject matter should be up to date and, if possible, should reflect current knowledge and
concepts.

III. References
The reference follows the content. It tells where the content or subject matter has been
taken. The reference may be a book, a module, or any publication. It must bear the author of the
material and if possible, the publications. Some examples are given below.

1. Project Wild (1992) K to 12 Activity Guide, An Interdisciplinary, Supplementary

Conservation and Environmental Education Program. Council of Environmental
Education, Bethesda, MD
2. Shipman, James, Jerry Wilson, et al (2009). An Introduction to Physical Science.
Houghton Mifflin Co. Boston MA
3. Romo, Salvador B, (2013). Horticulture an Exploratory Course. Lorimar Publishing Inc.
Quezon city
4. Bilbao, Purita P. and Corpuz, Brenda B. et al (2012). The Teaching Profession 2nd Ed.
Lorimar Publishing Inc. Quezon City.

IV. Teaching and Learning Methods

These are the activities where the learners derive experiences. It is always good to keep in
mind the teaching strategies that students will experience (lectures, laboratory classes, fieldwork
etc.) and make them lea rn. The teaching -learning methods should allow cooperation,
competition as well as individualism or independent learning among the students. For example:

1. Cooperative learning activities allow students to work together. Students are guided to
learn on their own to find solutions to their problems. The role of the teachers is to guide
the learners. Democratic process is encouraged, and each one contributes to the success
of learning. Students learn from each other in ways. Group projects and activities
considerably enhance the curriculum.

2. Independent learning activities allow learners to develop personal responsibility. The

degree of independence to learn how to learn is enhanced. This strategy is more
appropriate for fast learners.
 3. Competitive activities, where students will test their competencies against another in a
healthy manner allow learners to perform to their maximum. Most successful individuals
in their adult life are competitive, even in early schooling. They mostly become the
survivors in a very competitive world.

4. The use of various delivery modes to provide learning experiences is recommended.

Online learning and similar modes are increasingly important in many curricula, but these
need to be planned carefully to be effective.

V. Assessment/Evaluation
Learning occurs most effectively when students receive feedback, i.e. when they receive
information on what they have already (and have not) learned. The process by which this
information is generated is assessment. It has three main forms:

1. Self-assessment, through which students learn to monitor and evaluate their own
learning. This should be a significant element in the curriculum because we aim to
produce graduates who are appropriately reflective and self -critical

2. Peer assessment, in which students provide feedback on each other’s learning. This
can be viewed as an extension of self -assessment and presupposes trust and mutual
respect. Research suggests that students can learn to judge each other’s work as reliably
as staff.

3. Teacher assessment, in which the teacher prepares and administers tests and gives
feedback on the student’s performance.

Assessment may be formative (providing feedback to help the student learn more) or
summative (expressing a judgement on the student’ s achievement by reference to stated
criteria). Many assessment tasks involve an element of both, e.g. an assignment that is marked
and returned to the student with detailed comments.
Summative assessment usually involves the allocation of marks or grades This helps the
teacher make decisions about the progress or performance of the students
Students usually learn more by understanding the strengths and weaknesses of their work
than by knowing the mark or grade given to it. For this reason, summative assessment tasks
(including unseen examinations) should include an element of formative feedback, if possible.

Application of the Fundamental Components to Other Curriculum Designs

While our example efforts only to designing a lesson plan which is a mini curriculum, similar
components will also be used in making projects. Based on the curriculum models we have
learned; the fundamental components include the following:
Major components of a Course Design or Syllabus
1. Intended outcomes (or objectives)
2. Content/Subject Matter (with references)
3. Methods/strategies (with needed resources)
4. Evaluation (means of assessment

All other additional components are trimmings that each designer may place. This
additional part may be an institutional template, suggested by other curriculum experts and as
required by educational agencies like the Department of Education, Commission on Higher
Education, Accrediting Agencies, Professional organizations that would serve the purposes they
intend to achieve.